Autologous rib grafts for craniocervical junction surgery in children: a clinical application.

OBJECTIVE: Autologous iliac bone is commonly used as a bone graft material to achieve solid fusion in craniocervical junction (CVJ) surgery. However, the developing iliac bone of children is less than ideal as a bone graft material. The matured rib bone of children presents a potential substitute material for iliac bone. The aim of this study was to evaluate the efficacy of autologous rib grafts for craniocervical junction surgery in children. METHODS: The outcomes of 10 children with abnormalities of the craniocervical junction who underwent craniocervical junction surgery between January 2020 and December 2022 were retrospectively reviewed. All patients underwent posterior fusion and internal fixation surgery with autologous rib grafts. Pre- and post-operative images were obtained and clinical follow-ups were conducted to evaluate neurological function, pain level, donor site complications, and bone fusion rates. RESULTS: All surgeries were successful. During the 8- to 24-month follow-up period, all patients achieved satisfactory clinical results. Computed tomography at 3-6 months confirmed successful bone fusion and regeneration of the rib defect in all patients with no neurological or donor site complications. CONCLUSION: Autologous rib bone is a safe and effective material for bone grafting in craniocervical junction fusion surgery for children that can reduce the risks of donor site complications and increase the amount of bone graft, thereby achieving a higher bone fusion rate.

An exclusionary screening method based on 3D morphometric features to sort commingled atlases and axes.

In forensic commingled contexts, when the disarticulation occurs uniquely at the atlantoaxial joint, the correct match of atlas and axis may lead to the desirable assembly of the entire body. Notwithstanding the importance of this joint in such scenarios, no study has so far explored three-dimensional (3D) methodologies to match these two adjoining bones. In the present study, we investigated the potential of re-associating atlas and axis through 3D-3D superimposition by testing their articular surfaces congruency in terms of point-to-point distance (Root Mean Square, RMS). We analysed vertebrae either from the same individual (match) and from different individuals (mismatch). The RMS distance values were assessed for both groups (matches and mismatches) and a threshold value was determined to discriminate matches with a sensitivity of 100%. The atlas and the corresponding axis from 41 documented skeletons (18 males and 23 females), in addition to unpaired elements (the atlas or the axis) from 5 individuals, were superimposed, resulting in 41 matches and 1851 mismatches (joining and non-joining elements). No sex-related significant differences were found in matches and mismatches (p = 0.270 and p = 0.210, respectively), allowing to pool together the two sexes in each group. RMS values ranged between 0.41 to 0.77 mm for matches and between 0.37 and 2.18 mm for mismatches. Significant differences were found comparing the two groups (p < 0.001) and the highest RMS of matches (0.77 mm) was used as the discriminative value that provided a sensitivity of 100% and a specificity of 41%. In conclusion, the 3D-3D superimposition of the atlanto-axial articular facets cannot be considered as a re-association method per se, but rather as a screening one. However, further research on the validation of the 3D approach and on its application to other joints might provide clues to the complex topic of the reassociation of crucial adjoining bones.

[A quantitative study of mechanics in the treatment of atlantoaxial joint disorder by tendon relaxation manipulation].

OBJECTIVE: To explore dose-effect relationship of biomechanical parameters in treating atlantoaxial joint disorder by slimming manipulation. METHODS: From October 2022 to May 2023, 18 patients with atlantoaxial joint disorders were treated, including 10 males and 8 females;aged from 24 to 27 years old with an average of (25.50±1.10) years old;CT of cervical vertebra showed 16 patients with right side distortion and 2 patients with left side distortion. The mechanical parameters of treatment of atlantoaxial joint disorder by tendon relaxation manipulation were measured by wearing massage manipulation gloves. The magnitude, frequency and mechanical curve of force during tendon relaxation and starting force, pulling force, pulling time and mechanical curve during rehabilitation were quantified, the differences between the affected and contralateral manipulations were compared. RESULTS: The maximum force and frequency of Fengchi(GB20) on the affected side were (19.82±2.02) N and (116.83±14.49) times/min, and opposite side were (13.87±2.19) N and (188.89±16.03) times/min, respectively. There were statistically difference in the maximum force and frequency of both sides (P<0.05). The maximum force and frequency of Quepen (ST12) on the affected side were (14.44±3.27) N and (139.06±28.47) times/min, and those on the opposite side were (9.41±1.38) N and (142.50±28.47) times/min. There was difference in maximum force on both sides (P<0.05). The starting force, turning force and turning time of the affected side were (14.16±5.98) N, (11.56±6.63) N, (0.14±0.03) S, and the contralateral side were (8.94±3.39) N, (8.30±4.64) N, (0.18±0.04) S, respectively. The difference of starting force, turning force and turning time on both sides were statistically significant (P<0.05). CONCLUSION: By applying a light relaxation force on the affected side, the mechanical balance between cervical vertebrae could be restored, and recovery trend of atlantoaxial joint disorder could be strengthened. On this basis, the atlantoaxial odontoid process could be reversed by applying a light rotation force, which reflects the characteristics of high safety of the manipulation.

Anatomy and mobility in the adult cadaveric craniocervical junction.

Genetic diseases with craniofacial malformations can be associated with anomalies of the craniocervical joint (CCJ). The functions of the CCJ are thus impaired, as mobility may be either limited by abnormal bone fusion causing headaches, or exaggerated in the case of hypermobility, which may cause irreparable damage to the spinal cord. Restoring the balance between mobility and stability requires surgical correction in children. The anatomy and biomechanics of the CCJ are quite unique, yet have been overlooked in the past decades. Pediatric evidence is so scarce, that investigating the adult CCJ is our best shot to disentangle the form-function relationships of this anatomical region. The motivation of the present study was to understand the morphological and functional basis of motion in the CCJ, in the hope to find morphological features accessible from medical imaging able to predict mobility. To do so, we have quantified the in-vitro kinematics of the CCJ in nine cadaveric asymptomatic adults, and estimated a wide range of mobility variables covering the complexity of spinal motion. We compared these variables with the shape of the occipital, the atlas and the axis, obtained using a dense geometric morphometric approach. Morphological joint congruence was also quantified. Our results suggest a strong relationship between bone shape and motion, with the overall geometry predicting best the primary movements, and the joint facets predicting best the secondary movements. We propose a functional hypothesis stating that the musculoligamental system determines movements of great amplitude, while the shape and congruence of joint facets determine the secondary and coupled movements, especially by varying the geometry of bone stops and the way ligaments are tensioned. We believe this work will provide valuable insights in understanding the biomechanics of the CCJ. Furthermore, it should help surgeons treating CCJ anomalies by enabling them to translate objectives of functional and clinical outcome into clear objectives of morphological outcome.

Augmented Reality in Spine Surgery: A Case Study of Atlantoaxial Instrumentation in Os Odontoideum.

Despite advancement in surgical innovation, C1-C2 fixation remains challenging due to risks of screw malposition and vertebral artery (VA) injuries. Traditional image-based navigation, while useful, often demands that surgeons frequently shift their attention to external monitors, potentially causing distractions. In this article, we introduce a microscope-based augmented reality (AR) navigation system that projects both anatomical information and real-time navigation images directly onto the surgical field. In the present case report, we discuss a 37-year-old female who suffered from os odontoideum with C1-C2 subluxation. Employing AR-assisted navigation, the patient underwent the successful posterior instrumentation of C1-C2. The integrated AR system offers direct visualization, potentially minimizing surgical distractions. In our opinion, as AR technology advances, its adoption in surgical practices and education is anticipated to expand.

Two-level Anterior Cervical Corpectomy and Fusion versus Posterior Open-door Laminoplasty for the Treatment of Cervical Ossification of Posterior Longitudinal Ligament: A Comparison of the Clinical Impact on the Occipito-Atlantoaxial Complex.

OBJECTIVE: Both two-level anterior cervical corpectomy and fusion (t-ACCF) and posterior open-door laminoplasty (ODLP) are effective surgical procedures for the treatment of ossification of the posterior longitudinal ligament (OPLL). Previous studies have identified different effects of different surgical procedures on the upper and subaxial cervical spine (UCS, SCS), however, there are no studies on the effects of t-ACCF and ODLP on the occipito-atlantoaxial complex. Therefore, the purpose of this study is to compare the changes in sagittal parameters and range of motion (ROM) of the occipito-atlantoaxial complex in OPLL patients treated with t-ACCF and ODLP. METHODS: This was a retrospective study that included 74 patients who underwent t-ACCF or ODLP for the treatment of OPLL from January 2012 to August 2022 at our institution. Preoperative, 3-month, and 1-year postoperative cervical neutral, flexion-extension, and lateral flexion radiographs were taken. Sagittal parameters including Cobb angle of C2-7, C0-2, C0-1, C1-2, C2 slope, and the ROM were measured. The clinical outcome was assessed using the JOA, VAS, and NDI scores preoperatively and at 3 and 12 months postoperatively. Multiple linear regression was employed to identify factors influencing changes in UCS. RESULTS: In the ODLP group, the SCS (C2-7) Cobb angle was significantly reduced (12.85 ± 10.0 to 7.68 ± 11.27; p < 0.05), and the UCS (C0-2) Cobb angle was significantly compensated for at 1 year postoperatively compared with the t-ACCF group (3.05 ± 4.09 vs 0.79 ± 2.62; p < 0.01). The SCS and lateral flexion ROM of the ODLP group was better maintained than t-ACCF (14.51 ± 6.00 vs 10.72 ± 3.79; 6.87 ± 4.56 vs 3.81 ± 1.67; p < 0.01). The compensatory increase in C0-2, C0-1, and C1-2 ROM was pronounced in both groups, especially in the ODLP group. The results of multiple linear regression showed that only the surgical procedure was a significant factor influencing UCS. CONCLUSION: The loss of the SCS Cobb angle was more pronounced in ODLP relative to t-ACCF, resulting in a significant compensatory increase in UCS and atlantoaxial Cobb angle. The ROM of the UCS, atlantooccipital, and atlantoaxial joints was significantly increased in both groups, this may accelerate degenerative changes in the occipital-atlantoaxial complex, may leading to poorer outcomes in the long-term; of these, ODLP should receive more attention. In contrast, t-ACCF better maintains normal curvature of the SCS and occipito-atlantoaxial complex but loses more ROM.

The C2 isthmus screw provided sufficient biomechanical stability in the setting of atlantoaxial dislocation-a finite element study.

BACKGROUND: The emerging of the C2 isthmus screw fixation technique is gaining popularity in the setting of atlantoaxial dislocation or other conditions requiring fixation of C2. However, the biomechanical stability of this fixation is poorly understood. PURPOSE: To compare and elucidate the biomechanical stability of C2 pedicle screw (C2PS), C2 isthmus screw (C2IS) and C2 short isthmus screw (C2SIS) fixation techniques in atlantoaxial dislocation (AAD). METHOD: A three-dimensional finite element model (FEM) from occiput to C3 was established and validated from a healthy male volunteer. Three FEMs, C1 pedicle screw (PS)-C2PS, C1PS-C2IS, C1PS-C2SIS were also constructed. The range of motion (ROM) and the maximum von Mises stress under flexion, extension, lateral bending and axial rotation loading were analyzed and compared. The pullout strength of the three fixations for C2 was also evaluated. RESULT: C1PS-C2IS model showed the greatest decrease in ROM with flexion, extension, lateral bending and axial rotation. C1PS-C2PS model showed the least ROM reduction under all loading conditions than both C2IS and C2SIS. The C1PS-C2PS model had the largest von Mises stress on the screw under all directions followed by C1PS-C2SIS, and lastly the C1PS-C2IS. Under axial rotation and lateral bending loading, the three models showed the maximum and minimum von Mises stress on the screw respectively. The stress of the three models was mainly located in the connection of the screw and rod. Overall, the maximum screw pullout strength for C2PS, C2IS and C2SIS were 729.41N, 816.62N, 640.54N respectively. CONCLUSION: In patients with atlantoaxial dislocations, the C2IS fixation provided comparable stability, with no significant stress concentration. Furthermore, the C2IS had sufficient pullout strength when compared with C2PS and C2SIS. C2 isthmus screw fixation may be a biomechanically favourable option in cases with AAD. However, future clinical trials are necessary for the evaluation of the clinical outcomes of this technique.

Atlantoaxial dislocation in the setting of NMLFS.

BACKGROUND: Nablus mask-like facial syndrome (NMFLS) is an extremely rare genetic syndrome characterized by facial dysmorphia as well as developmental delay. In the present report we describe a potential association between non-traumatic atlanto-occipital dislocation and NMFLS in an 11-year old female lacking typical facial features of NMFLS. CASE DESCRIPTION: An 11-year-old female with autism presented with symptoms of persistent headache and vomiting as well as neck stiffness. Further investigation and CT imaging revealed congenital malformation of the skull base and craniocervical junction with complete posterior subluxation of the left occipital condyle. MRI findings later corroborated the findings on CT. CONCLUSIONS: The patient was successfully treated with occipitocervical fusion. The findings in this case suggest the possibility that atlanto-occipital instability and generalized occipitocervical may be associated with NMFLS.

The effect of suboccipital muscle dysfunction on the biomechanics of the upper cervical spine: a study based on finite element analysis.

OBJECTIVE: Muscle dysfunction caused by repetitive work or strain in the neck region can interfere muscle responses. Muscle dysfunction can be an important factor in causing cervical spondylosis. However, there has been no research on how the biomechanical properties of the upper cervical spine change when the suboccipital muscle group experiences dysfunction. The objective of this study was to investigate the biomechanical evidence for cervical spondylosis by utilizing the finite element (FE) approach, thus and to provide guidance for clinicians performing acupoint therapy. METHODS: By varying the elastic modulus of the suboccipital muscle, the four FE models of C0-C3 motion segments were reconstructed under the conditions of normal muscle function and muscle dysfunction. For the two normal condition FE models, the elastic modulus for suboccipital muscles on both sides of the C0-C3 motion segments was equal and within the normal range In one muscle dysfunction FE model, the elastic modulus on both sides was equal and greater than 37 kPa, which represented muscle hypertonia; in the other, the elastic modulus of the left and right suboccipital muscles was different, indicating muscle imbalance. The biomechanical behavior of the lateral atlantoaxial joint (LAAJ), atlanto-odontoid joint (ADJ), and intervertebral disc (IVD) was analyzed by simulations, which were carried out under the six loadings of flexion, extension, left and right lateral bending, left and right axial rotation. RESULTS: Under flexion, the maximum stress in LAAJ with muscle imbalance was higher than that with normal muscle and hypertonia, while the maximum stress in IVD in the hypertonic model was higher than that in the normal and imbalance models. The maximum stress in ADJ was the largest under extension among all loadings for all models. Muscle imbalance and hypertonia did not cause overstress and stress distribution abnormalities in ADJ. CONCLUSION: Muscle dysfunction increases the stress in LAAJ and in IVD, but it does not affect ADJ.

Successful recovery from cardiac arrest due to atlantoaxial subluxation in Down syndrome: a case report.

INTRODUCTION: Down syndrome is the most common chromosomal abnormality associated with intellectual impairments. Unexpected deaths are common with this disease. There are certain difficulties in clarifying the cause of death because the manifestations may be quite diverse and involve many organ systems. Atlantoaxial subluxation is a dangerous complication of Down syndrome, as it may lead to cervical cord-medullary compression. CASE PRESENTATION: Herein, we present a case of Down syndrome in a patient who completely recovered from cardiac arrest due to atlantoaxial subluxation. The neck was immobilized during post-cardiac arrest care, and the patient underwent surgery after 14 days. The patient could walk independently and was discharged 3 months later. At the last follow-up 5 years after surgery, the patient's general condition was good. DISCUSSION: Physicians should be aware that atlantoaxial instability can cause cardiac arrest in patients with genetic syndromes.

[Traumatic posterior atlantoaxial dislocation without fracture of the upper cervical spine in a female geriatric patient : Case report and literature search]. / Traumatische posteriore atlantoaxiale Dislokation ohne Fraktur der oberen Halswirbelsäule bei einer geriatrischen Patientin : Fallbericht und Literaturrecherche.

Traumatic posterior atlantoaxial dislocation (PAAD) without detection of a fracture of the upper cervical spine is a very rare injury that usually occurs in younger patients and in most cases leads to immediate death due to distraction of the spinal cord. In contrast, the present case describes this injury in a female geriatric patient at the age of 75 years. In the literature there are also clinical case reports, where traumatic PAAD without a fracture did not result in neurological deficits and where initially existing neurological deficits were completely reversible through closed or open reduction and internal fixation.

Comparison of iCT-based navigation and fluoroscopic-guidance for atlantoaxial screw placement in 78 patients with traumatic cervical spine injuries.

BACKGROUND CONTEXT: Studies have shown biomechanical superiority of cervical pedicle screw placement over other techniques. However, accurate placement is challenging due to the inherent risk of neurovascular complications. Navigation technology based on intraoperative 3D imaging allows highly accurate screw placement, yet studies specifically investigating screw placement in patients with traumatic atlantoaxial injuries are scarce. The aim of this study was to compare atlantoaxial screw placement as treatment of traumatic instabilities using iCT-based navigation or fluoroscopic-guidance with intraoperative 3D control scans. METHODS: This was a retrospective review of patients with traumatic atlantoaxial injuries treated operatively with dorsal stabilization of C1 and C2. Patients were either assigned to the intraoperative navigation or fluoroscopic-guidance group. Screw accuracy, procedure time, and revisions were compared. RESULTS: Seventy-eight patients were included in this study with 51 patients in the navigation group and 27 patients in the fluoroscopic-guidance group. In total, 312 screws were placed in C1 and C2. Screw accuracy was high in both groups; however, pedicle perforations > 1 mm occurred significantly more often in the fluoroscopic-guidance group (P = 0.02). Procedure time was on average 23 min shorter in the navigation group (P = 0.02). CONCLUSIONS: This study contributes to the available data showing that navigated atlantoaxial screw placement proves to be feasible as well as highly accurate compared to the fluoroscopic-guidance technique without prolonging the time needed for surgery. When comparing these data with other studies, the application of different classification systems for assessment of screw accuracy should be considered.

Unilateral high-riding vertebral artery is associated with asymmetric morphological changes of the atlantoaxial joint: a novel risk factor for atlantoaxial osteoarthritis.

PURPOSE: This study aimed to investigate the association between unilateral high-riding vertebral artery (HRVA) and morphological changes in the atlantoaxial joint (AAJ) and to determine whether unilateral HRVA is a risk factor for atlantoaxial osteoarthritis (AAOA). METHODS: We conducted a retrospective analysis of 2496 patients admitted to our medical center between January 2020 and December 2022 who underwent CT imaging of the cervical spine. Two hundred and seventy-two patients with unilateral HRVA (HRVA group) were identified and a respective 2:1 age- and sex-matched control group without HRVA was built. Morphological parameters, including C2 lateral mass settlement (C2 LMS), C1/2 coronal inclination (C1/2 CI), lateral atlanto-dental interval (LADI), and C1/2 relative rotation angle (C1/2 RRA) were measured. The degree of AAOA was recorded. Risk factors associated with AAOA were identified using univariate and multivariable logistic regression analyses. RESULTS: The study included 61.4% women, and the overall average age of the study population was 48.7 years. The morphological parameters (C2 LMS, C1/2 CI, and LADI) in AAJ were asymmetric between the HRVA and the non-HRVA sides in the HRVA group (p < 0.001). These differences in parameters (d-C2 LMS, d-C1/2 CI, and d-LADI) between the HRVA and the non-HRVA sides, and C1/2 RRA were significantly larger than those in the control group. Eighty-three of 816 patients (10.2%) with AAOA had larger values of d-C2 LMS, d-C1/2 CI, d-LADI, and C1/2 RRA compared with the patients without AAOA (p < 0.05). The multivariable logistic regression analysis indicated that unilateral HRVA [adjusted odds ratio (OR) = 2.6, 95% CI: 1.1-6.3, p = 0.029], age in the sixth decade or older (adjusted OR = 30.2, 95% CI: 16.1-56.9, p < 0.001), women (adjusted OR = 2.1, 95% CI: 1.0-5.6, P = 0.034) were independent risk factors for AAOA. CONCLUSION: Unilateral HRVA was associated with asymmetric morphological changes of nonuniform settlement of C2 lateral mass, lateral slip of atlas, and atlantoaxial rotation displacement. Besides age ≥ 60 years and females, unilateral HRVA is an independent risk factor for AAOA.

Atlantoaxial joint stabilization using patient-specific 3-D-printed drill guides and 3-D-printed titanium plates or polymethyl methacrylate is effective in toy-breed dogs.

OBJECTIVE: To report the clinical outcomes in toy-breed dogs with atlantoaxial instability (AAI) stabilized with patient-specific 3-D-printed titanium plates or polymethyl methacrylate (PMMA), both with the assistance of 3-D-printed drill guides. ANIMALS: 15 client-owned dogs undergoing surgical treatment for AAI between January 1, 2020, and October 31, 2022. METHODS: The clinical characteristics, diagnostic images, and neurological outcomes of 15 dogs treated for AAI using 3-D-printing technology were reviewed. Postoperative CT images were examined to evaluate the screw placement accuracy in the atlas and axis. Clinical outcomes, including postoperative neurological improvement and screw loosening, were evaluated in dogs treated with a patient-specific titanium plate and those treated with PMMA. RESULTS: Patient-specific titanium plates (7 dogs) and PMMA (8 dogs) were used for AAI stabilization. The mean follow-up period was 15.2 months (range 7 to 22 months). A reduction of the axis without vertebral canal violation was confirmed on postoperative CT in 14 dogs. The mean deviation from the preoperative planning ranged from 0.30 to 1.27 mm at the insertion and exit points of 84 screws using this method. The neurological grade had improved in each dog postoperatively and at the final follow-up. Screw loosening was noted in 4 dogs in the titanium plates groups without neurological deterioration. CLINICAL RELEVANCE: Patient-specific 3-D-printed drill guides and titanium plates or PMMA are effective for AAI stabilization in toy-breed dogs, providing accurate guidance.

Atlantoaxial facet fixation using cervical facet cage: technical case report and review of the literature.

In 1994, the use of interfacet spacer placement was for joint distraction, reduction, and fusion to supplement atlantoaxial or occipitocervical fixation. Here, we present a unique case of bilateral atlantoaxial interfacet fixation using cervical facet cages (CFC) in a pediatric patient with basilar invagination. In addition, we review the literature on atlantoaxial facet fixation. We present a 12-year-old boy with Wiedemann-Steiner syndrome who presented with multiple episodes of sudden neck jerking, described as in response to a sensation of being shocked, and guarding against neck motion, found to have basilar invagination with cervicomedullary compression. He underwent an occiput to C3 fusion with C1-C2 CFC fixation. We also conducted a literature review identifying all publications using the following keywords: "C1" AND "C2" OR "atlantoaxial" AND "facet spacer" OR "DTRAX." The patient demonstrated postoperative radiographic reduction of his basilar invagination from 6.4 to 4.1 mm of superior displacement above the McRae line. There was a 4.5 mm decrease in the atlantodental interval secondary to decreased dens retroflexion. His postoperative course was complicated by worsening of his existing dysphagia but was otherwise unremarkable. His neck symptoms completely resolved. We illustrate the safe use of CFC for atlantoaxial facet distraction, reduction, and instrumented fixation in a pediatric patient with basilar invagination. Review of the literature demonstrates that numerous materials can be safely placed as a C1-C2 interfacet spacer including bone grafts, titanium spacers, and anterior cervical discectomy and fusion cages. We argue that CFC may be included in this arsenal even in pediatric patients.

Unilateral Biplanar Screw-Rod Fixation Technique for the Treatment of Odontoid Fractures in Patients with Atlantoaxial Bone or Vascular Abnormalities.

OBJETIVE: This study aims to introduce the unilateral biplanar screw-rod fixation (UBSF) technique (a hybrid fixation technique: 2 sets of atlantoaxial screws were placed on the same side), which serves as a salvage method for traditional posterior atlantoaxial fixation. To summarize the indications of this technique and to assess its safety, feasibility, and clinical effectiveness in the treatment of odontoid fractures. METHODS: Patients with odontoid fractures were enrolled according to special criteria. Surgical duration and intraoperative blood loss were documented. Patients were followed up for a minimum of 12 months. X-ray and computerized tomography scans were conducted and reviewed at 1 day, and patients were asked to return for computerized tomography reviews at 3, 6, 9, and 12 months after surgery until fracture union. Recorded and compared the Neck Visual Analog Scale and Neck Disability Index presurgery and at 1 week and 12 months postsurgery. RESULTS: Between January 2016 and December 2022, our study enrolled 7 patients who were diagnosed with odontoid fractures accompanied by atlantoaxial bone or vascular abnormalities. All 7 patients underwent successful UBSF surgery, and no neurovascular injuries were recorded during surgery. Fracture union was observed in all patients, and the Neck Visual Analog Scale and Neck Disability Index scores improved significantly at 1 week and 12 months postoperative (P < 0.01). CONCLUSIONS: The UBSF technique has been demonstrated to be safe, feasible, and effective in treating odontoid fractures. In cases where the atlantoaxial bone or vascular structure exhibits abnormalities, it can function as a supplementary or alternative approach to the conventional posterior C1-2 fixation.