On-Demand Vaccine Production via Dock-and-Display of Biotinylated Antigens on Bacterial Extracellular Vesicles.

Engineered outer membrane vesicles (OMVs) derived from Gram-negative bacteria are a promising vaccine technology for developing immunity against diverse pathogens. However, antigen display on OMVs can be challenging to control and highly variable due to bottlenecks in protein expression and localization to the bacterial host cell's outer membrane, especially for bulky and complex antigens. Here, we describe methods related to a universal vaccine technology called AvidVax (avidin-based vaccine antigen crosslinking) for rapid and simplified assembly of antigens on the exterior of OMVs during vaccine development. The AvidVax platform involves remodeling the OMV surface with multiple copies of a synthetic antigen-binding protein (SNAP), which is an engineered fusion protein comprised of an outer membrane scaffold protein linked to a biotin-binding protein. The resulting SNAPs enable efficient decoration of OMVs with a molecularly diverse array of biotinylated subunit antigens, including globular and membrane proteins, glycans and glycoconjugates, haptens, lipids, nucleic acids, and short peptides. We detail the key steps in the AvidVax vaccine production pipeline including preparation and isolation of SNAP-OMVs, biotinylation and enrichment of vaccine antigens, and formulation and characterization of antigen-loaded SNAP-OMVs.

Repurposing Proximity-Dependent Protein Labeling (BioID2) for Protein Interaction Mapping in E. coli.

Methods that identify protein-protein interactions are essential for understanding molecular mechanisms controlling biological systems. Proximity-dependent labeling has proven to be a valuable method for revealing protein-protein interaction networks in living cells. A mutant form of the biotin protein ligase enzyme from Aquifex aeolicus (BioID2) underpins this methodology by producing biotin that is attached to proteins that enter proximity to it. This labels proteins for capture, extraction, and identification. In this chapter, we present a toolkit for BioID2 specifically adapted for use in E. coli, exemplified by the chemotaxis protein CheA. We have created plasmids containing BioID2 as expression cassettes for proteins (e.g., CheA) fused to BioID2 at either the N or C terminus, optimized with an 8 × GGS linker. We provide a methodology for expression and verification of CheA-BioID2 fusion proteins in E. coli cells, the in vivo biotinylation of interactors by protein-BioID2 fusions, and extraction and analysis of interacting proteins that have been biotinylated.

A ubiquitin-specific, proximity-based labeling approach for the identification of ubiquitin ligase substrates.

Over 600 E3 ligases in humans execute ubiquitination of specific target proteins in a spatiotemporal manner to elicit desired signaling effects. Here, we developed a ubiquitin-specific proximity-based labeling method to selectively biotinylate substrates of a given ubiquitin ligase. By fusing the biotin ligase BirA and an Avi-tag variant to the candidate E3 ligase and ubiquitin, respectively, we were able to specifically enrich bona fide substrates of a ligase using a one-step streptavidin pulldown under denaturing conditions. We applied our method, which we named Ub-POD, to the really interesting new gene (RING) E3 ligase RAD18 and identified proliferating cell nuclear antigen and several other critical players in the DNA damage repair pathway. Furthermore, we successfully applied Ub-POD to the RING ubiquitin ligase tumor necrosis factor receptor-associated factor 6 and a U-box-type E3 ubiquitin ligase carboxyl terminus of Hsc70-interacting protein. We anticipate that our method could be widely adapted to all classes of ubiquitin ligases to identify substrates.

Signal-On Detection of Caspase-3 with Methylene Blue-Loaded Metal-Organic Frameworks as Signal Reporters.

In this work, we report on an electrochemical method for the signal-on detection of caspase-3 and the evaluation of apoptosis based on the biotinylation reaction and the signal amplification of methylene blue (MB)-loaded metal-organic frameworks (MOFs). Zr-based UiO-66-NH2 MOFs were used as the nanocarriers to load electroactive MB molecules. Recombinant hexahistidine (His6)-tagged streptavidin (rSA) was attached to the MOFs through the coordination interaction between the His6 tag in rSA and the metal ions on the surface of the MOFs. The acetylated peptide substrate Ac-GDEVDGGGPPPPC was immobilized on the gold electrode. In the presence of caspase-3, the peptide was specifically cleaved, leading to the release of the Ac-GDEVD sequence. A N-terminal amine group was generated and then biotinylated in the presence of biotin-NHS. Based on the strong interaction between rSA and biotin, rSA@MOF@MB was captured by the biotinylated peptide-modified electrode, producing a significantly amplified electrochemical signal. Caspase-3 was sensitively determined with a linear range from 0.1 to 25 pg/mL and a limit of detection down to 0.04 pg/mL. Further, the active caspase-3 in apoptosis inducer-treated HeLa cells was further quantified by this method. The proposed signal-on biosensor is compatible with the complex biological samples and shows great potential for apoptosis-related diagnosis and the screening of caspase-targeting drugs.

Biotinylated polyaminoacid-based nanoparticles for the targeted delivery of lenvatinib towards hepatocarcinoma.

In this work, we describe the development of targeted polymeric nanoparticles loaded with lenvatinib for the treatment of hepatocellular carcinoma (HCC). A synthetic brush copolymer (PHEA-g-BIB-pButMA-g-PEG-biotin) was synthesized from α-poly(N-2-hydroxyethyl)-D,L-aspartamide (PHEA) by a three-step reaction involving atom transfer radical polymerisation (ATRP) to graft hydrophobic polybutylmethacrylate pendant groups and further conjugation with biotinylated polyethylene glycol via carbonate ester. Subsequently, lenvatinib-loaded nanoparticles were obtained and characterized demonstrating colloidal size, negative zeta potential, biotin exposure on the surface and the ability to release lenvatinib in a sustained manner. Lenvatinib-loaded nanoparticles were tested in vitro on HCC cells to evaluate their anticancer efficacy compared to free drug. Furthermore, the enhanced in vivo efficacy of lenvatinib-loaded nanoparticles on nude mice HCC xenograft models was demonstrated by evaluating tumor burdens, apoptotic markers and histological scores after administration of lenvatinib-nanoparticles via intraperitoneal or oral route. Finally, in vivo biodistribution studies were performed, demonstrating the ability of the prepared drug delivery systems to significantly accumulate in the solid tumor by active targeting, due to the presence of biotin on the nanoparticle surface.

Deciphering structural variation upon biotinylation of biotin carboxyl carrier protein domain in Streptococcus pneumoniae.

Streptococcus pneumoniae is a leading cause of community-acquired pneumonia and is responsible for acute invasive and non-invasive infections. Fight against pneumococcus is currently hampered by insufficient vaccine coverage and rising antimicrobial resistance, making the research necessary on novel drug targets. High-throughput mutagenesis has shown that acetyl-CoA carboxylase (ACC) is an essential enzyme in S. pneumoniae which converts acetyl-CoA to malonyl-CoA, a key step in fatty acid biosynthesis. ACC has four subunits; Biotin carboxyl carrier protein (BCCP), Biotin carboxylase (BC), Carboxyl transferase subunit α and ß. Biotinylation of S. pneumoniae BCCP (SpBCCP) is required for the activation of ACC complex. In this study, we have biophysically characterized the apo- and holo- biotinylating domain SpBCCP80. We have performed 2D and 3D NMR experiments to analyze the changes in amino acid residues upon biotinylation of SpBCCP80. Further, we used NMR backbone chemical shift assignment data for bioinformatical analyses to determine the secondary and tertiary structure of proteins. We observed major changes in AMKVM motif and thumb region of SpBCCP80 upon biotinylation. Overall, this work provides structural insight into the apo- to holo- conversion of SpBCCP80 which can be further used as a drug target against S. pneumoniae.

Utilization of a Branched Late-Stage Clickable Biotinylated Chassis on the Example of a Pittsburgh B Analogue.

Biotinylation is probably the most frequent and practically useful modification of molecules to facilitate selective and highly affine binding to (strept)avidin for immobilization, enrichment, and purification for further (bio)chemical or (bio)physical investigations. We present a protecting-group-free synthesis of a branched biotin bis-azide that enables dual-payload late-stage functionalization with arbitrary alkynes via click chemistry. Utility of the chassis is briefly showcased on the example of a valuable Pittsburgh B analogue, which binds pathological protein aggregates, commonly found in neurodegenerative diseases.

A proximity proteomics pipeline with improved reproducibility and throughput.

Proximity labeling (PL) via biotinylation coupled with mass spectrometry (MS) captures spatial proteomes in cells. Large-scale processing requires a workflow minimizing hands-on time and enhancing quantitative reproducibility. We introduced a scalable PL pipeline integrating automated enrichment of biotinylated proteins in a 96-well plate format. Combining this with optimized quantitative MS based on data-independent acquisition (DIA), we increased sample throughput and improved protein identification and quantification reproducibility. We applied this pipeline to delineate subcellular proteomes across various compartments. Using the 5HT2A serotonin receptor as a model, we studied temporal changes of proximal interaction networks induced by receptor activation. In addition, we modified the pipeline for reduced sample input to accommodate CRISPR-based gene knockout, assessing dynamics of the 5HT2A network in response to perturbation of selected interactors. This PL approach is universally applicable to PL proteomics using biotinylation-based PL enzymes, enhancing throughput and reproducibility of standard protocols.

Synthetic Amine Linkers for Efficient Sortagging.

Enzymatic site-specific bioconjugation techniques, in particular sortase-mediated ligation, are increasingly used to generate conjugated proteins for a wide array of applications. Extension of the utility and practicality of sortagging for diverse purposes is critically dependent on further improvement of the efficiency of sortagging reactions with a wider structural variety of substrates. We present a comprehensive comparative mass spectrometry screening study of synthetic nonpeptidic incoming amine nucleophile substrates of Staphylococcus aureus Sortase A enzyme. We have identified the optimal structural motifs among the chemically diverse set of 452 model primary and secondary amine-containing sortagging substrates, and we demonstrate the utility of representative amine linkers for efficient C-terminal biotinylation of nanobodies.

Analysis of Lipid GPCR Molecular Interactions by Proximity Labeling.

G-protein-coupled receptors (GPCRs) are hepta-helical transmembrane proteins that mediate various intracellular signaling events in response to their specific ligands including many lipid mediators. Although analyses of GPCR molecular interactions are pivotal to understanding diverse intracellular signaling events, affinity purification of interacting proteins by a conventional co-immunoprecipitation method is challenging due to the hydrophobic nature of GPCRs and their dynamic molecular interactions. Proximity labeling catalyzed by a TurboID system is a powerful technique for defining the molecular interactions of target proteins in living cells. TurboID and miniTurbo (a modified version of TurboID) are engineered biotin ligases that biotinylate neighboring proteins in a promiscuous manner. When fused with a target protein and expressed in living cells, TurboID or miniTurbo mediates the biotin labeling of the proteins with close proximity to the target protein, allowing efficient purification of the biotinylated proteins followed by a shot-gun proteomic analysis. In this chapter, we describe a step-by-step protocol for the labeling of GPCR neighboring proteins by TurboID or miniTurbo, purification of the biotin-labeled proteins, and subsequent sample preparation for proteomic analysis. We utilized S1PR1 as a model GPCR, a receptor for a bioactive lipid molecule sphingosine 1-phosphate (S1P) that plays various roles in physiological and pathological conditions. This analysis pipeline enables the mapping of interacting proteins of lipid GPCRs in living cells.

TurboID-mediated proximity labeling technologies to identify virus co-receptors.

Virus receptors determine the tissue tropism of viruses and have a certain relationship with the clinical outcomes caused by viral infection, which is of great importance for the identification of virus receptors to understand the infection mechanism of viruses and to develop entry inhibitor. Proximity labeling (PL) is a new technique for studying protein-protein interactions, but it has not yet been applied to the identification of virus receptors or co-receptors. Here, we attempt to identify co-receptor of SARS-CoV-2 by employing TurboID-catalyzed PL. The membrane protein angiotensin-converting enzyme 2 (ACE2) was employed as a bait and conjugated to TurboID, and a A549 cell line with stable expression of ACE2-TurboID was constructed. SARS-CoV-2 pseudovirus were incubated with ACE2-TurboID stably expressed cell lines in the presence of biotin and ATP, which could initiate the catalytic activity of TurboID and tag adjacent endogenous proteins with biotin. Subsequently, the biotinylated proteins were harvested and identified by mass spectrometry. We identified a membrane protein, AXL, that has been functionally shown to mediate SARS-CoV-2 entry into host cells. Our data suggest that PL could be used to identify co-receptors for virus entry.

Characterization of biotinylated human ACE2 and SARS-CoV-2 Omicron BA.4/5 spike protein reference materials.

Accurate diagnostic and serology assays are required for the continued management of the COVID-19 pandemic yet spike protein mutations and intellectual property concerns with antigens and antibodies used in various test kits render comparability assessments difficult. As the use of common, well-characterized reagents can help address this lack of standardization, the National Research Council Canada has produced two protein reference materials (RMs) for use in SARS-CoV-2 serology assays: biotinylated human angiotensin-converting enzyme 2 RM, ACE2-1, and SARS-CoV-2 Omicron BA.4/5 spike protein RM, OMIC-1. Reference values were assigned through a combination of amino acid analysis via isotope dilution liquid chromatography tandem mass spectrometry following acid hydrolysis, and ultraviolet-visible (UV-Vis) spectrophotometry at 280 nm. Vial-to-vial homogeneity was established using UV-Vis measurements, and protein oligomeric status, monitored by size exclusion liquid chromatography (LC-SEC), was used to evaluate transportation, storage, and freeze-thaw stabilities. The molar protein concentration in ACE2-1 was 25.3 ± 1.7 µmol L-1 (k = 2, 95% CI) and consisted almost exclusively (98%) of monomeric ACE2, while OMIC-1 contained 5.4 ± 0.5 µmol L-1 (k = 2) spike protein in a mostly (82%) trimeric form. Glycoprotein molar mass determination by LC-SEC with multi-angle light scattering detection facilitated calculation of corresponding mass concentrations. To confirm protein functionality, the binding of OMIC-1 to immobilized ACE2-1 was investigated with surface plasmon resonance and the resulting dissociation constant, KD ~ 4.4 nM, was consistent with literature values.

Biotinylated Theranostic Amphiphilic Polyurethane for Targeted Drug Delivery.

In the area of drug delivery aided by stimuli-responsive polymers, the biodegradability of nanocarriers is one of the major challenges that needs to be addressed with the utmost sincerity. Herein, a hydrogen sulfide (H2S) responsive hydrophobic dansyl-based trigger molecule is custom designed and successfully incorporated into the water-soluble polyurethane backbone, which is made of esterase enzyme susceptible urethane bonds. The amphiphilic polyurethanes, PUx (x = 2 and 3) with a biotin chain end, formed self-assembled nanoaggregates. A hemolysis and cytotoxicity profile of doxorubicin (DOX)-loaded biotinylated PU3 nanocarriers revealed that it is nonhemolytic and has excellent selectivity toward HeLa cells (biotin receptor-positive cell lines) causing ∼60% cell death while maintaining almost 100% cell viability for HEK 293T cells (biotin receptor-negative cell lines). Furthermore, better cellular internalization of DOX-loaded fluorescent nanocarriers in HeLa cells than in HEK 293T cells confirmed receptor-mediated endocytosis. Thus, this work ensures that the synthesized polymers serve as biodegradable nanocarriers for anticancer therapeutics.

Profiling Mouse Brain Single-Cell-Type Proteomes Via Adeno-Associated Virus-Mediated Proximity Labeling and Mass Spectrometry.

Single-cell-type proteomics is an emerging field of research that combines cell-type specificity with the comprehensive proteome coverage offered by bulk proteomics. However, the extraction of single-cell-type proteomes remains a challenge, particularly for hard-to-isolate cells like neurons. In this chapter, we present an innovative technique for profiling single-cell-type proteomes using adeno-associated virus (AAV)-mediated proximity labeling (PL) and tandem-mass-tag (TMT) mass spectrometry. This technique eliminates the need for cell isolation and offers a streamlined workflow, including AAV delivery to express TurboID (an engineered biotin ligase) controlled by cell-type-specific promoters, biotinylated protein purification, on-bead digestion, TMT labeling, and liquid chromatography-mass spectrometry (LC-MS). We examined this method by analyzing distinct brain cell types in mice. Initially, recombinant AAVs were used to concurrently express TurboID and mCherry proteins driven by neuron- or astrocyte-specific promoters, which was validated through co-immunostaining with cellular markers. With biotin purification and TMT analysis, we successfully identified around 10,000 unique proteins from a few micrograms of protein samples with high reproducibility. Our statistical analyses revealed that these proteomes encompass cell-type-specific cellular pathways. By utilizing this technique, researchers can explore the proteomic landscape of specific cell types, paving the way for new insights into cellular processes, deciphering disease mechanisms, and identifying therapeutic targets in neuroscience and beyond.

Survival of transfused red blood cells from a donor with alpha-thalassemia trait in a recipient with sickle cell disease.

BACKGROUND: Post-transfusion survival of donor red blood cells (RBCs) is important for effective chronic transfusion therapy in conditions including sickle cell disease (SCD). Biotin labeling RBCs allows direct in vivo measurement of multiple donor RBC units simultaneously post-transfusion. STUDY DESIGN AND METHODS: In an observational trial of patients with SCD receiving monthly chronic transfusion therapy, aliquots of RBCs from one transfusion episode were biotin-labeled and infused along with the unlabeled RBC units. Serial blood samples were obtained to measure RBC survival. Donor units were tested for RBC indices, hemoglobin fractionation, and glucose-6-phosphate dehydrogenase (G6PD) enzyme activity. For microcytic donor RBCs (MCV < 70 fL), HBA1 and HBA2 genetic testing was performed on whole blood. RESULTS: We present one recipient, a pediatric patient with SCD and splenectomy who received two RBC units with aliquots from each unit labeled at distinct biotin densities (2 and 18 µg/mL biotin). One donor unit was identified to have microcytosis (MCV 68.5 fL after biotinylation); whole blood sample obtained at a subsequent donation showed 2-gene deletion alpha-thalassemia trait (ɑ-3.7kb/ɑ-3.7kb) and normal serum ferritin. G6PD activity was >60% of normal mean for both. The RBCs with alpha-thalassemia RBC had accelerated clearance and increased surface phosphatidylserine post-transfusion, as compared with the normocytic RBC (half life 65 vs. 86 days, respectively). DISCUSSION: Post-transfusion RBC survival may be lower for units from donors with alpha-thalassemia trait, although the impact of thalassemia trait donors on transfusion efficacy requires further study.

APEX2-based proximity proteomic analysis identifies candidate interactors for Plasmodium falciparum knob-associated histidine-rich protein in infected erythrocytes.

The interaction of Plasmodium falciparum-infected red blood cells (iRBCs) with the vascular endothelium plays a crucial role in malaria pathology and disease. KAHRP is an exported P. falciparum protein involved in iRBC remodelling, which is essential for the formation of protrusions or "knobs" on the iRBC surface. These knobs and the proteins that are concentrated within them allow the parasites to escape the immune response and host spleen clearance by mediating cytoadherence of the iRBC to the endothelial wall, but this also slows down blood circulation, leading in some cases to severe cerebral and placental complications. In this work, we have applied genetic and biochemical tools to identify proteins that interact with P. falciparum KAHRP using enhanced ascorbate peroxidase 2 (APEX2) proximity-dependent biotinylation and label-free shotgun proteomics. A total of 30 potential KAHRP-interacting candidates were identified, based on the assigned fragmented biotinylated ions. Several identified proteins have been previously reported to be part of the Maurer's clefts and knobs, where KAHRP resides. This study may contribute to a broader understanding of P. falciparum protein trafficking and knob architecture and shows for the first time the feasibility of using APEX2-proximity labelling in iRBCs.

Amyotrophic Lateral Sclerosis-Associated Mutants of SOD1 Perturb mRNA Splicing through Aberrant Interactions with SRSF2.

Amyotrophic lateral sclerosis (ALS) is a neurodegenerative disorder that results in the degeneration of neurons in the brain and spinal cord. Although a substantial number of studies have been conducted, much remains to be learned about the cellular mechanisms underlying ALS. In this study, we employed an engineered ascorbate peroxidase (APEX)-based proximity biotinylation, together with affinity pull-down of the ensuing biotinylated peptides, to investigate the proximity proteomes of human SOD1 and its two ALS-linked mutants, G85R and G93A. We were able to identify 25 common biotinylated peptides with preferential enrichment in the proximity proteomes of SOD1G85R and SOD1G93A over wild-type SOD1. Our coimmunoprecipitation followed by Western blot analyses revealed that one of these proteins, SRSF2, binds more strongly with the two SOD1 mutants than its wild-type counterpart. We also observed aberrant splicing of mRNAs in cells with ectopic expression of the two SOD1 mutants relative to cells expressing the wild-type protein. In addition, the aberrations in splicing elicited by the SOD1 variants were markedly attenuated upon knockdown of SRSF2. Collectively, we uncovered that ALS-liked SOD1G85R and SOD1G93A mutants interact more strongly with SRSF2, where the aberrant interactions perturbed mRNA splicing. Thus, our work offered novel mechanistic insights into the contributions of the ALS-linked SOD1 mutants to disease etiology.

Biotin labeling allows for post-transfusion functional assessment of stored human platelets in mice.

BACKGROUND: Platelet radiolabeling with radioisotopes is currently used for human platelet recovery and survival studies. Biotinylation enables ex vivo post-transfusion platelet function testing. Whether platelet biotinylation itself affects platelet function is controversial. STUDY DESIGN AND METHODS: Platelet concentrates from healthy humans were stored for 6 days. Samples were obtained at 1 or 2 and 6 days, and platelets were labeled following a radiolabeling protocol using saline instead of radioactive indium-111 (sham radiolabeling [sham-RL]). Alternatively, a newly developed biotinylation protocol, a washing protocol, or an unmanipulated control sample were used. Platelet function was assessed by flow cytometry after stimulation with platelet agonists and labeling of platelets with platelet activation markers. To test whether platelets can be activated after transfusion, labeled platelets were transfused into nonobese diabetic/severe combined immunodeficiency mice, and samples were obtained 1 h after transfusion. RESULTS: The activation profile of biotinylated platelets was comparable to sham-RL platelets before transfusion except for significantly less α-degranulation and more phosphatidyl serine exposure on storage day 1/2. There was no significant difference between sham-RL and biotinylated platelets on storage day 6. Sham-RL and biotinylated platelets were significantly less activatable than washed and unmanipulated control platelets. After transfusion, the activation profile of biotinylated platelets was largely indistinguishable from unmanipulated ones. DISCUSSION: The decrease in activation level in biotinylated platelets we and others observed appears mainly due to the physical manipulation during the labeling process. In conclusion, biotinylated platelets allow for post-transfusion function assessment, a major advantage over radiolabeling.

Controlled In Situ Self-Assembly of Biotinylated Trans-Cyclooctene Nanoparticles for Orthogonal Dual-Pretargeted Near-Infrared Fluorescence and Magnetic Resonance Imaging.

A pretargeted strategy that decouples targeting vectors from radionuclides has shown promise for nuclear imaging and/or therapy in vivo. However, the current pretargeted approach relies on the use of antibodies or nanoparticles as the targeting vectors, which may be compromised by poor tissue penetration and limited accumulation of targeting vectors in the tumor tissues. Herein, we present an orthogonal dual-pretargeted approach by combining stimuli-triggered in situ self-assembly strategy with fast inverse electron demand Diels-Alder (IEDDA) reaction and strong biotin-streptavidin (SA) interaction for near-infrared fluorescence (NIR FL) and magnetic resonance (MR) imaging of tumors. This approach uses a small-molecule probe (P-Cy-TCO&Bio) containing both biotin and trans-cyclooctene (TCO) as a tumor-targeting vector. P-Cy-TCO&Bio can efficiently penetrate subcutaneous HeLa tumors through biotin-assisted targeted delivery and undergo in situ self-assembly to form biotinylated TCO-bearing nanoparticles (Cy-TCO&Bio NPs) on tumor cell membranes. Cy-TCO&Bio NPs exhibited an "off-on" NIR FL and retained in the tumors, offering a high density of TCO and biotin groups for the concurrent capture of Gd-chelate-labeled tetrazine (Tz-Gd) and IR780-labeled SA (SA-780) via the orthogonal IEDDA reaction and SA-biotin interaction. Moreover, Cy-TCO&Bio NPs offered multiple-valent binding modes toward SA, which additionally regulated the cross-linking of Cy-Gd&Bio NPs into microparticles (Cy-Gd&Bio/SA MPs). This process could significantly (1) increase r1 relaxivity and (2) enhance the accumulation of Tz-Gd and SA-780 in the tumors, resulting in strong NIR FL, bright MR contrast, and an extended time window for the clear and precise imaging of HeLa tumors.

Using Biotinylated Iron-Responsive Element to Analyze the Activity of Iron Regulatory Proteins.

Iron regulatory proteins (IRP1 and IRP2) are the master regulators of mammalian iron homeostasis. They bind to the iron-responsive elements (IREs) of the transcripts of iron-related genes to regulate their expression, thereby maintaining cellular iron availability. The primary method to measure the IRE-binding activity of IRPs is the electrophoresis mobility shift assay (EMSA). This method is particularly useful for evaluating IRP1 activity, since IRP1 is a bifunctional enzyme and its protein levels remain similar during conversion between the IRE-binding protein and cytosolic aconitase forms. Here, we exploited a method of using a biotinylated-IRE probe to separate IRE-binding IRPs followed by immunoblotting to analyze the IRE-binding activity. This method allows for the successful measurement of IRP activity in cultured cells and mouse tissues under various iron conditions. By separating IRE-binding IRPs from the rest of the lysates, this method increases the specificity of IRP antibodies and verifies whether a band represents an IRP, thereby revealing some previously unrecognized information about IRPs. With this method, we showed that the S711-phosphorylated IRP1 was found only in the IRE-binding form in PMA-treated Hep3B cells. Second, we found a truncated IRE-binding IRP2 isoform that is generated by proteolytic cleavage on sites in the 73aa insert region of the IRP2 protein. Third, we found that higher levels of SDS, compared to 1-2% SDS in regular loading buffer, could dramatically increase the band intensity of IRPs in immunoblots, especially in HL-60 cells. Fourth, we found that the addition of SDS or LDS to cell lysates activated protein degradation at 37 °C or room temperature, especially in HL-60 cell lysates. As this method is more practical, sensitive, and cost-effective, we believe that its application will enhance future research on iron regulation and metabolism.