A Novel Combined Approach to Better Predict Sealing Performance of Luer Lock Connectivity.

Luer systems, for example Luer-needle hub with syringe's Luer cone tip and its Luer lock Adapter, are common interface on medical devices. One of the key questions in this application is about the safety guaranty and dose accuracy. It is then crucial to study the sealing between these elements. In this study we combine the use of Finite Element Analysis (FEA) and Multiscale Contact Mechanics (MCM) to analyze the connectivity and sealing performance of a glass syringe and a plastic needle Luer hub.This methodology has been applied before to the contact between glass and rubber and this is the first time that it is used for the contact between glass and plastic materials. The use of FEA allows to calculate the contact pressures and the nominal area of contact. The surface topographies of the two surfaces were measured, over a wide wavelength range (mm to nm). Subsequently, the air and liquid interfacial flow (leakage) is calculated using Persson's MCM theory which considers the roughness and elasto-plasticity of the interfacial surfaces. The theoretical predictions are compared to experimental leak measurements by pressure decay method. Further analysis is conducted, evidencing the key features that are responsible for a good sealing.

Facile preparation and characterization of biodegradable and biocompatible UV shielding transdermal patches based on natural rubber latex- dextrin blends.

The physico-chemical and biological properties of natural rubber latex (NRL), entailing its biodegradability and biocompatibility, render it a promising material for various biomedical applications. This research explores the facile blending of NRL with dextrin in different compositions to investigate its potential as a prospective UV shielding transdermal patch for biomedical applications. The superior compatibility between the polymers after blending and the improved thermal stability have been established through FTIR, DSC, and TGA examinations, respectively. Optimization of blended polymers for compatibility, wettability, crystallinity, and static mechanical properties has been performed. Morphology characterization conducted via SEM and AFM techniques suggests a uniform morphology for the optimized blend system. The UV shielding ability of the blend has been confirmed by the evaluation of in-vitro UV shielding performance, UV protection factor (UPF), and the superior protection of the optimized system on living cells upon UV irradiation. The observed cell viability, swelling, erosion, porosity, hemocompatibility, and soil degradation properties suggest the NRL-DXT combination for the possible development of high-quality transdermal patches.

Mechanical performance and anisotropic analysis of rubberised 3D-printed concrete incorporating PP fibre.

The research investigates the effects of substituting sand with rubber particles derived from waste tyres-up to 40% by volume-and the inclusion of polypropylene (PP) fibres. Unlike steel fibres, which can cause operational challenges and surface irregularities in the printing process, PP fibres' flexibility integrates well within the concrete matrix. This integration ensures smooth extrusion and a high-quality surface finish, enhancing the printability of the concrete. The study's findings reveal that including rubber particles and PP fibres impacts the concrete's properties, showing a general decline in compressive and flexural strengths as the rubber content increases. Nevertheless, the PP fibre-enhanced mixtures maintain sufficient structural strength, demonstrating an anisotropic compressive strength above 30 MPa and a flexural strength of 4 MPa. These results underscore the feasibility of using rubberised 3D-printed concrete with PP fibres in sustainable construction practices, aligning with standards (ACI 318:2018) and contributing to eco-friendly and innovative construction methodologies.

Combined toxicity of pristine or artificially aged tire wear particles and bisphenols to Tigriopus japonicus.

Tire wear particles (TWPs) are considered an important component of microplastic pollution in the marine environment and occur together with a variety of aquatic pollutants, including frequently detected bisphenols. The adverse effects of TWPs or bisphenols on aquatic organisms have been widely reported. However, the combined toxicity of TWPs and bisphenols is still unknown. In this study, the combined toxicity of both pristine (p-) and aged TWPs (a-TWPs) and four bisphenols ((bisphenol A (BPA), bisphenol F (BPF), bisphenol S (BPS), and bisphenol AF (BPAF)) to Tigriopus japonicus was evaluated. TWPs increased the toxicity of BPA and BPF but decreased the toxicity of BPAF. For BPS, there was synergistic toxic effect in the presence of p-TWPs, but slightly antagonistic effect was observed in the presence of a-TWPs. This adsorption of BPAF by TWPs resulted in a reduction of its toxicity to the copepod. A-TWPs could release more Zn than p-TWPs, and the released Zn contributed to the synergistic effect of TWPs and BPA or BPF. The aggregation formed by TWPs in certain sizes (e.g., 90-110 µm) could cause intestinal damage and lipid peroxidation in T. japonicus. The synergistic effect of p-TWPs and BPS might be due to the aggregation size of the binary mixture. The results of the current study will be important to understand the combined toxic effect of TWPs and bisphenols and the potential toxic mechanisms of the binary mixture.

Intrinsic challenges and strategic approaches for enhancing the potential of natural rubber and its derivatives: A review.

Natural rubber (NR) and its derivatives play indispensable roles in various industries due to their unique properties and versatile applications. However, the widespread utilization of NR faces intrinsic challenges such as limited mechanical strength, poor resistance to heat and organic solvent, poor electrical conductivity, and low compatibility with other materials, prompting researchers to explore enhancing its performance. Modified NRs (MNRs) like cyclization, deproteinization, chlorination, epoxidation, or grafting NR demonstrated a few enhanced merits compared to NR. However, various strategies, such as blending, vulcanization, crosslinking, grafting, plasticization, reinforcement, and nanostructuring, overcame most drawbacks. This review comprehensively examines these challenges and delves into the modification strategies employed to enhance the properties and expand the applications of NR and its derivatives. Furthermore, the review explores future visions for the NR industry, emphasizing integrating advanced modification techniques, adopting sustainable practices, and promoting circular economy principles. By elucidating the inherent challenges, outlining effective modification strategies, and envisioning future trajectories, this review provides valuable insights for stakeholders seeking to navigate and contribute to the sustainable development of the NR sector.

Superabsorbent ZnO/rubber-based hydrogel composite for removal and photocatalytic degradation of methylene blue.

A superabsorbent hydrogel was prepared by the free-radical copolymerization of natural rubber (NR) latex with poly(acrylic acid) (PAA) at NR loadings up to 50 wt%. An NR/PAA hydrogel containing 40 wt% of NR (NR-40) had a water absorption capacity of 214 g/g (21,400 %) of its dry weight. The compressive modulus increased 512 % and sample integrity was improved due to the physical entanglement of NR chains. NR-40 hydrogel removed 97 % of methylene blue (MB) from the aqueous solution in 1 h (at initial concentrations of 10-1000 mg/L) and produced a maximum removal of 1191 mg MB/g of hydrogel at an initial MB concentration of 4500 mg/L. The adsorption of MB was an endothermic process. Fourier transform infrared spectroscopy indicated that hydrogen bonding and electrostatic interaction drove the process. After the in-situ incorporation of ZnO into NR-40, absorbed energy from sunlight generated active species that could photocatalytically degrade adsorbed MB in the hydrogel matrix. The scavenger tests indicated that superoxide radical anions and hydroxyl radicals were the main species for this process. The hydrogel composite material showed good stability and could be regenerated and reused over 10 cycles, degrading >80 % of the adsorbed dye. This novel natural-based hydrogel provides double functions of adsorption and photodegradation of toxic dyes without the requirement of chemicals and a separation process.

Dual-functional natural rubber latex foam composites for solar-driven clean water production and heavy metal decontamination.

Solar steam generation (SSG) offers a sustainable approach to fresh water production. Herein, a novel dual-functional natural rubber/carbon black composite foam evaporator is presented for a cost-efficient SSG system that both produces fresh water and eliminates heavy metals present in the water. The composite foam is produced using the Dunlop process, and in its optimized form, it absorbed >96 % of sunlight. The foam evaporator exhibited a thermal conductivity of 0.052 W/m⋅K, a water evaporation rate of 1.40 kg/m2/h, converted 83.38 % of light to heat under 1 sun irradiation, and showed outstanding stability. The technology required to produce this composite foam is already available to make large-scale production feasible, while the natural raw materials are abundant. On the basis of its performance qualities, the rubber foam composite appears to be an excellent candidate for application as a viable solar absorber for SSG to produce fresh, clean water for commercial purposes.

Rubber oily liquids as transdermal and periodontal pocket drug delivery systems.

This study investigates the incorporation of block natural rubber (NR) as a viscosity-inducing agent in NR oily liquids designed for drug delivery systems. A variety of liquids, encompassing natural oils, synthetic and non-oil liquids, and a eutectic mixture, were incorporated with NR using solvent displacement technique. Successful formulations were achieved for several oily liquids, with viscosity correlating to NR concentration. Particularly, a eutectic mixture of menthol and camphor exhibited optimal viscosity by direct dissolving enabling the development of transdermal ibuprofen delivery and injectable azithromycin for periodontitis treatment. NR prolonged the release of both drugs. The extended-release ibuprofen system holds promise for transdermal applications, while the azithromycin system displayed inhibitory effects against Staphylococcus aureus, Streptococcus mutans, and Porphyromonas gingivalis, suggesting potential for periodontitis treatment. Overall, this investigation advances the development of NR oily liquids as a versatile drug delivery system that can be applied both on the skin and for the local injection into the periodontal pocket, showcasing promise for various therapeutic applications.

Quantification of natural rubber blends by reflection/reflectance infrared and confocal Raman spectroscopy: a comparison of statistical methods.

The blend of butadiene and acrylonitrile copolymer (NBR) with natural poly-cis-isoprene (NR) shows increased resistance to swelling in solvents in comparison to the individual components. In aerospace, NBR rubber is used as thermal protection for rockets and shall not contain other polymers, even in low contents, otherwise, it can affect the protection performance and rocket safety by causing detachment of the elastomer/propellant interface; therefore, this investigation presents methodologies to determine the NR/NBR contents. This study explores different analytical techniques, such as Raman spectroscopy and Fourier transform infrared (FTIR) spectroscopy, in the mid-infrared (MIR) by reflection and in the near-infrared by reflectance (NIRA) modes, Furthermore, quantification strategies by univariate, bivariate and multivariate (chemometric) models are evaluated and compared. A proposed methodology, based on multivariate Raman microscopy with partial least squares regression (PLS), showed high linearity (R2 > 0.99) and low error (< 0.82 %). The validation of FT-MIR data for the CH3, which presented lower error (1.3%) than vinylidene band (6%), showed that both methodologies (reflection and NIRA reflectance) can be used for the quantification of NR in NR/NBR. These results constitute a contribution to the state of the art in researching industrial and aerospace elastomeric applications.

Magnetic Rubber@Ni-Co layered double hydroxide derived from ZIF-67 template as nanostructured sorbent; application in determination of anticancer drugs in plasma samples.

In this study, a magnetic three-dimensional nano-composite based on Rubber-Fe3O4@Ni-Co Layered double hydroxide derived from ZIF-67 template was synthesized by a hydrothermal method. The proposed nano-composite was used as a sorbent for the enrichment of trace amounts of anti-cancer drugs (dasatinib and erlotinib hydrochloride) from plasma samples followed by determination using high-performance liquid chromatographic analysis (HPLC-UV). The synthesized nano-sorbent was characterized by X-ray diffraction, field emission scanning electron microscopy, Fourier transform infrared spectroscopy, vibrating-sample magnetometer, Brunauer-Emmett-Teller surface analysis, Barrett-Joyner-Halenda pore size analysis and energy dispersive X-ray spectroscopy. Under optimal experimental conditions, factors affecting on extraction efficiency such as pH, ionic strength, extraction temperature and time, desorption solvent and time, the limit of detection (LODs) and the limit of quantification (LOQs) were obtained as 0.6, 2 µg/L for both of dasatinib and erlotinib, respectively. Also, linear range of the method were 2-500 and 2-1000 µg/L for dasatinib and erlotinib, respectively. Relative standard deviations (RSD%) for the repeatability of extraction on sorbent to sorbent were obtained as 3.59, 1.97 %, and one sorbent reusability were investigated and relative standard deviation values were obtained 5.35, 3.30 % for dasatinib and erlotinib, respectively.

Deformation investigation of electromagnetic diaphragm pump rubber diaphragm.

A diaphragm pump is a type of volumetric pump that has excellent sealing performance. An electromagnetic diaphragm pump is a kind of widely adopted diaphragm pump that has a simple structure, low power loss, and high cost performance. However, the calculation method of deformation for the electromagnetic diaphragm pump rubber diaphragm is presently lacking. Herein, a calculating method of deformation for the electromagnetic diaphragm pump rubber diaphragm is proposed. By establishing and analyzing a deformation model of the electromagnetic diaphragm pump rubber diaphragm, a theoretical relationship between the deformation of the electromagnetic diaphragm pump rubber diaphragm, the size of the electromagnetic diaphragm pump rubber diaphragm and the pressure of fluid is determined. The experimental results indicate that the biggest difference between the tested axial deformation and the calculated axial deformation of the electromagnetic diaphragm pump rubber diaphragm is 0.04 mm and the calculation results show agreement with the experimental results.

A stretchable conductive elastomer sensor with self-healing and highly linear strain for human movement detection and pressure response.

Expanding the detection information of wearable smart devices in applications has practical implications for their use in daily life and healthcare. Damage and breakage caused by mechanical injuries and continuous use are unavoidable for polymer matrices so self-healing properties are expected to be conferred on flexible sensors to extend their life and durability. In addition, a good linearity of relative resistance change vs. strain (gauge factor, GF) facilitates the streamlined conversion of electrical signals to 3D information of human motion, whereas existing works on sensors neglect the quantitative analysis of signals. This letter reports a self-healable flexible electronic sensor based on hydrogen bonding and electrostatic interaction between maleic acid-grafted natural rubber (MNR), polyaniline (PANI), and phytic acid (PA). MNR is the flexible matrix and the template for aniline (ANI) polymerization, and PA acts as the dopant and crosslinking agent. The MNR-PANI-PA sensor shows easy self-healing at room temperature, enhanced mechanical behaviour (∼2.5 MPa, 1000% strain), and excellent linearity (GF of 13.8 over 250% strain and GF of 32.0 over 250-100% strain). Due to the highly linear relationship between ΔR/R and bending angle, the electrical signals of human limb movement can output relevant information on bending angle and frequency. By constructing a sensing array, changes in the position and magnitude of applied pressure could also be detected in real-time. Based on these advantages, the MNR-PANI-PA composite sensor is expected to have potential applications in health monitoring, body motion detection, and electronic skins.

Environmental fate of tire-rubber related pollutants 6PPD and 6PPD-Q: A review.

To enhance tire durability, the antioxidant N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD) is used in rubber, but it converts into the toxic 6PPD quinone (6PPD-Q) when exposed to oxidants like ozone (O3), causing ecological concerns. This review synthesizes the existing data to assess the transformation, bioavailability, and potential hazards of two tire-derived pollutants 6PPD and 6PPD-Q. The comparative analysis of different thermal methods utilized in repurposing waste materials like tires and plastics into valuable products are analyzed. These methods shed light on the aspects of pyrolysis and catalytic conversion processes, providing valuable perspectives into optimizing the waste valorization and mitigating environmental impacts. Furthermore, we have examined the bioavailability and potential hazards of chemicals used in tire manufacturing, based on the literature included in this review. The bioavailability of these chemicals, particularly the transformation of 6PPD to 6PPD-Q, poses significant ecological risks. 6PPD-Q is highly bioavailable in aquatic environments, indicating its potential for widespread ecological harm. The persistence and mobility of 6PPD-Q in the environment, along with its toxicological effects, highlight the critical need for ongoing monitoring and the development of effective mitigation strategies to reduce its impact on both human health and ecosystem. Future research should focus on understanding the chronic effects of low-level exposure to these compounds on both terrestrial and aquatic ecosystems, as well as the potential for bioaccumulation in the food chain. Additionally, this review outlines the knowledge gaps, recommending further research into the toxicity of tire-derived pollutants in organisms and the health implications for humans and ecosystems.

Histochemical studies on the distribution and accumulation of trans-polyisoprene in the rubber-producing plant Eucommia ulmoides.

Eucommia ulmoides rubber (EUR) is a high-quality natural rubber resource, which can be extracted from different organs of the Eucommia ulmoides tree. In this study, EUR was isolated from the leaves, barks, and pericarps, and the structural characteristics and physicochemical properties of EUR were systematically determined. The accumulation and distribution of EUR in different tissues were assessed through in situ observations combined with cellular and subcellular scales. The preliminary analyses indicated that the variations in the physicochemical properties of EUR across different tissues were associated with its accumulation microstructure. Further analyses by SEM and TEM showed that the initial cell differentiation and fusion resulted in the formation of tubular structures without any nucleus. A limited number of rubber particles were generated within the cytoplasm, concurrent with aggregation and fusion. Eventually, rubber particles filled the entire cytoplasm, and organelles disappeared to form highly aggregated filamentous structures. In addition, the number and area of EUR-containing cells were closely related to the organization sizes of barks and leaves. This study provided valuable insights into Eucommia ulmoides histology and the rubber industry.

Enhancing weatherability and mechanical properties of tung oil wood finishes through natural rubber modification via the Diels-Alder reaction.

Tung oil is commonly utilized for coating protection in wooden products, often attracting attention for its appearance, antimicrobial capabilities, and insect-resistant coatings. However, its poor mechanical properties and poor weather resistance stem from excessive self-crosslinking of surplus conjugated double bonds and molecular chains, resulting in poor film wrinkling. Therefore, this study introduces natural rubber via the Diels-Alder reaction to consume the residual double bonds in tung oil, resulting in tung oil/natural rubber composite coatings (NRTO) with excellent mechanical properties and weather resistance. The results indicate that NRTO exhibits excellent mechanical properties, including high elongation (32 %) and strong adhesion (4.55 MPa). Furthermore, NRTO demonstrates outstanding acid resistance and UV aging resistance. Given its many benefits, NRTO film emerges as a promising candidate for substantially protecting wood surfaces in demanding environments.

Enhancing clayey soil performance with lime and waste rubber tyre powder: Mechanical, microstructural, and statistical analysis.

Nowadays, for soil stabilisation and cleaner production of geo-composites, the possibility of utilizing waste rubber is in vogue. The present paper deals with experimentally investigating the mechanical and micro-structural characteristics of weak Indian clayey soil partially substituted with lime (0-3.5%) and waste rubber tyre powder (0-15%). It was observed that, with increasing lime and rubber powder content, the plasticity index of the soil decreases. The shear strength and compaction testing results reveal that adding lime and rubber tyre powder (RTP) enhances the geotechnical performance of clayey soil up to an optimum dosage value. Also, the tri-axial shear testing was performed to obtain stress-strain curves for all considered soil mixes. For modified clayey soil containing 3% lime and 12.5% rubber powder, the cohesion values and bearing capacities improved phenomenally by 36.1% and 88.6% respectively, when compared to clayey soil. Further for this mix, SEM analysis reveals a compacted microstructure which improves dry-density and California's bearing ratio among all modified mixes. The novel co-relations upon regression analysis are found able to predict plasticity index, dry density, bearing capacity and shear strength with higher confidence levels. Overall, the cost-benefit analysis worked out to obtain the optimum cost of construction of footings and flexible pavement shows cost deductions up to 19% and 39% respectively while utilizing modified clay soil mixes containing 3% lime and 12.5% rubber powder in subgrade, ultimately making production stronger, cheaper and environment friendly.

In Vitro and In Vivo Biotransformation Profiling of 6PPD-Quinone toward Their Detection in Human Urine.

The antioxidant N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD) and its oxidized quinone product 6PPD-quinone (6PPD-Q) in rubber have attracted attention due to the ecological risk that they pose. Both 6PPD and 6PPD-Q have been detected in various environments that humans cohabit. However, to date, a clear understanding of the biotransformation of 6PPD-Q and a potential biomarker for exposure in humans are lacking. To address this issue, this study presents a comprehensive analysis of the extensive biotransformation of 6PPD-Q across species, encompassing both in vitro and in vivo models. We have tentatively identified 17 biotransformation metabolites in vitro, 15 in mice in vivo, and confirmed the presence of two metabolites in human urine samples. Interestingly, different biotransformation patterns were observed across species. Through semiquantitative analysis based on peak areas, we found that almost all 6PPD-Q underwent biotransformation within 24 h of exposure in mice, primarily via hydroxylation and subsequent glucuronidation. This suggests a rapid metabolic processing of 6PPD-Q in mammals, underscoring the importance of identifying effective biomarkers for exposure. Notably, monohydroxy 6PPD-Q and 6PPD-Q-O-glucuronide were consistently the most predominant metabolites across our studies, highlighting monohydroxy 6PPD-Q as a potential key biomarker for epidemiological research. These findings represent the first comprehensive data set on 6PPD-Q biotransformation in mammalian systems, offering insights into the metabolic pathways involved and possible exposure biomarkers.