Characterizing Dissipative Elastic Metamaterials Produced by Additive Manufacturing.

Viscoelastic behavior can be beneficial in enhancing the unprecedented dynamics of polymer metamaterials or, in contrast, negatively impacting their wave control mechanisms. It is, therefore, crucial to properly characterize the viscoelastic properties of a polymer metamaterial at its working frequencies to understand viscoelastic effects. However, the viscoelasticity of polymers is a complex phenomenon, and the data on storage and loss moduli at ultrasonic frequencies are extremely limited, especially for additively manufactured polymers. This work presents a protocol to experimentally characterize the viscoelastic properties of additively manufactured polymers and to use them in the numerical analysis of polymer metamaterials. Specifically, the protocol includes the description of the manufacturing process, experimental procedures to measure the thermal, viscoelastic, and mechanical properties of additively manufactured polymers, and an approach to use these properties in finite-element simulations of the metamaterial dynamics. The numerical results are validated in ultrasonic transmission tests. To exemplify the protocol, the analysis is focused on acrylonitrile butadiene styrene (ABS) and aims at characterizing the dynamic behavior of a simple metamaterial made from it by using fused deposition modeling (FDM) three-dimensional (3D) printing. The proposed protocol will be helpful for many researchers to estimate viscous losses in 3D-printed polymer elastic metamaterials that will improve the understanding of material-property relations for viscoelastic metamaterials and eventually stimulate the use of 3D-printed polymer metamaterial parts in various applications.

Quantification of natural rubber blends by reflection/reflectance infrared and confocal Raman spectroscopy: a comparison of statistical methods.

The blend of butadiene and acrylonitrile copolymer (NBR) with natural poly-cis-isoprene (NR) shows increased resistance to swelling in solvents in comparison to the individual components. In aerospace, NBR rubber is used as thermal protection for rockets and shall not contain other polymers, even in low contents, otherwise, it can affect the protection performance and rocket safety by causing detachment of the elastomer/propellant interface; therefore, this investigation presents methodologies to determine the NR/NBR contents. This study explores different analytical techniques, such as Raman spectroscopy and Fourier transform infrared (FTIR) spectroscopy, in the mid-infrared (MIR) by reflection and in the near-infrared by reflectance (NIRA) modes, Furthermore, quantification strategies by univariate, bivariate and multivariate (chemometric) models are evaluated and compared. A proposed methodology, based on multivariate Raman microscopy with partial least squares regression (PLS), showed high linearity (R2 > 0.99) and low error (< 0.82 %). The validation of FT-MIR data for the CH3, which presented lower error (1.3%) than vinylidene band (6%), showed that both methodologies (reflection and NIRA reflectance) can be used for the quantification of NR in NR/NBR. These results constitute a contribution to the state of the art in researching industrial and aerospace elastomeric applications.

Kinetic study of isoprene hydroxy hydroperoxide radicals reacting with sulphur dioxide and their global-scale impact on sulphate formation.

Isoprene is the most relevant volatile organic compound emitted during the biosynthesis of metabolism processes. The oxidation of isoprene by a hydroxy radical (OH) is one of the main consumption schemes that generate six isomers of isoprene hydroxy hydroperoxide radicals (ISOPOOs). In this study, the rate constants of ISOPOOs + sulphur dioxide (SO2) reactions that eventually generate sulphur trioxide (SO3), the precursor of sulphate aerosol (SO42-(p)), are determined using microcanonical kinetic theories coupled with molecular structures and energies estimated by quantum chemical calculations. The results show that the reaction rates range from 10-27 to 10-20 cm3 molecule-1 s-1, depending on the atmospheric temperature and structure of the six ISOPOO isomers. The effect of SO3 formation from SO2 oxidation by ISOPOOs on the atmosphere is evaluated by a global chemical transport model, along with the rate constants obtained from microcanonical kinetic theories. The results show that SO3 formation is enhanced in regions with high SO2 or low nitrogen oxide (NO), such as China, the Middle East, and Amazon rainforests. However, the production rates of SO3 formation by ISOPOOs + SO2 reactions are eight orders of magnitude lower than that from the OH + SO2 reaction. This is indicative of SO42-(p) formation from the direct oxidation of SO2 by ISOPOOs, which is almost negligible in the atmosphere. The results of this study entail a detailed analysis of SO3 formation from gas-phase reactions of isoprene-derived products.

Computational investigation of cis-1,4-polyisoprene binding to the latex-clearing protein LcpK30.

Latex clearing proteins (Lcps) catalyze the oxidative cleavage of the C = C bonds in cis-1,4-polyisoprene (natural rubber), producing oligomeric compounds that can be repurposed to other materials. The active catalytic site of Lcps is buried inside the protein structure, thus raising the question of how the large hydrophobic rubber chains can access the catalytic center. To improve our understanding of hydrophobic polymeric substrate binding to Lcps and subsequent catalysis, we investigated the interaction of a substrate model containing ten carbon-carbon double bonds with the structurally characterized LcpK30, using multiple computational tools. Prediction of the putative tunnels and cavities in the LcpK30 structure, using CAVER-Pymol plugin 3.0.3, fpocket and Molecular Dynamic (MD) simulations provided valuable insights on how substrate enters from the surface to the buried active site. Two dominant tunnels were discovered that provided feasible routes for substrate binding, and the presence of two hydrophobic pockets was predicted near the heme cofactor. The larger of these pockets is likely to accommodate the substrate and to determine the size distribution of the oligomers. Protein-ligand docking was carried out using GOLD software to predict the conformations and interactions of the substrate within the protein active site. Deeper insight into the protein-substrate interactions, including close-contacts, binding energies and potential cleavage sites in the cis-1,4-polyisoprene, were obtained from MD simulations. Our findings provide further justification that the protein-substrate complexation in LcpK30 is mainly driven by the hydrophobic interactions accompanied by mutual conformational changes of both molecules. Two potential binding modes were identified, with the substrate in either extended or folded conformations. Whilst binding in the extended conformation was most favorable, the folded conformation suggested a preference for cleavage of a central double bond, leading to a preference for oligomers with 5 to 6 C = C bonds. The results provide insight into further enzyme engineering studies to improve catalytic activity and diversify the substrate and product scope of Lcps.

Histochemical studies on the distribution and accumulation of trans-polyisoprene in the rubber-producing plant Eucommia ulmoides.

Eucommia ulmoides rubber (EUR) is a high-quality natural rubber resource, which can be extracted from different organs of the Eucommia ulmoides tree. In this study, EUR was isolated from the leaves, barks, and pericarps, and the structural characteristics and physicochemical properties of EUR were systematically determined. The accumulation and distribution of EUR in different tissues were assessed through in situ observations combined with cellular and subcellular scales. The preliminary analyses indicated that the variations in the physicochemical properties of EUR across different tissues were associated with its accumulation microstructure. Further analyses by SEM and TEM showed that the initial cell differentiation and fusion resulted in the formation of tubular structures without any nucleus. A limited number of rubber particles were generated within the cytoplasm, concurrent with aggregation and fusion. Eventually, rubber particles filled the entire cytoplasm, and organelles disappeared to form highly aggregated filamentous structures. In addition, the number and area of EUR-containing cells were closely related to the organization sizes of barks and leaves. This study provided valuable insights into Eucommia ulmoides histology and the rubber industry.

Sustainable strategies towards better utilization of synthetic polymers.

The abstract provides an overview of a study focused on analyzing diverse strategies to achieve sustainable utilization of synthetic polymers through effective waste management. The escalating global consumption of synthetic polymers has precipitated a concerning increase in plastic waste and environmental degradation. To address this challenge, novel materials with specified application goals, such as engineered plastic, have been developed and are intended for recycling and reuse. Despite the reuse and recycling, when plastic gets disposed into the environment, the degradation properties of plastics render a direct disposal hazard, posing a significant environmental threat. To mitigate these issues, the concept of replacing specific monomers of engineered synthetic plastics with bio-alternatives or blending them with other polymers to enhance sustainability and environmental compatibility has emerged. In this study, Acrylonitrile Butadiene Styrene (ABS) plastic is the focal material, and three distinct investigations were conducted. First, replacing ABS plastic's butadiene monomer with natural rubber was explored for its properties and environmental impact. Second, ABS plastic was blended with virgin, recycled, and bio-alternatives of PET (polyethylene terephthalate) and PVC (polyvinyl chloride) polymers. Lastly, recycled ABS blended with recycled PET and PVC was analyzed for mechanical properties. Comparative assessments of these blends were made based on mechanical properties, carbon emissions, and cost-effectiveness. The study determined that the r-ABS/r-PVC (recycled) blend exhibited the most favorable characteristics for practical application.

Rubber Oxygenase Degradation Assay by UV-Labeling and Gel Permeation Chromatography.

A versatile and robust end-group derivatization approach using oximes has been developed for the detection of oxidative degradation of synthetic polyisoprenes and polybutadiene. This method demonstrates broad applicability, effectively monitoring degradation across a wide molecular weight range through ultraviolet (UV)-detection coupled to gel permeation chromatography. Importantly, it enables the effective monitoring of degradation via derivatization-induced UV-maximum shifts, even in the presence of an excess of undegraded polyene, overcoming limitations previously reported with refractive index detectors. Notably, this oxime-based derivatization methodology is used in enzymatic degradation experiments of synthetic polyisoprenes characterized by a cis: trans ratio with the rubber oxygenase LcpK30. It reveals substantial UV absorption in derivatized enzymatic degradation products of polyisoprene with molecular weights exceeding 1000 g mol-1 - an unprecedented revelation for this enzyme's activity on such synthetic polyisoprenes. This innovative approach holds promise as a valuable tool for advancing research into the degradation of synthetic polyisoprenes and polybutadiene, particularly under conditions of low organocatalytic or enzymatic degradation activity. With its broad applicability and capacity to reveal previously hidden degradation processes, it represents a noteworthy contribution to sustainable polymer chemistry.

(1E,3E)-1,4-Dinitro-1,3-butadiene-Synthesis, Spectral Characteristics and Computational Study Based on MEDT, ADME and PASS Simulation.

The chemistry of conjugated nitrodienes is becoming increasingly popular. These molecules are successfully applied in cycloaddition to synthesize six-membered rings in Diels-Alder reactions. Nitrodienes can be also applied to obtain bis-compounds in [3+2] cycloaddition. Moreover, the presence of a nitro group in the structure provides a possibility of further modification of the products. The simplest symmetrical representative of conjugated nitrodienes is (1E,3E)-1,4-dinitro-1,3-butadiene. Although the first mentions of the compound date back to the early 1950s, the compound has not yet been examined thoroughly enough. Therefore, in this article, a comprehensive study of (1E,3E)-1,4-dinitro-1,3-butadiene has been described. For this purpose, an experimental study including the synthesis process as well as an evaluation of the spectral characteristics has been conducted. So as to better understand the properties of this compound, a computational study of reactivity indices based on MEDT and also an assessment of pharmacokinetics and biological activity according to ADME and PASS methodologies have been made. On this basis, some future application trends of (1E,3E)-1,4-dinitro-1,3-butadiene have been proposed.

Elicitation of E-waste (acrylonitrile-butadiene styrene) enriched soil bioremediation and detoxification using Priestia aryabhattai MGP1.

Given the rise in both usage and disposal of dangerous electronics, there is a catastrophic rise in assemblage of electronic waste (e-waste). E-waste including various plastic resins are among the most frequently discarded materials in electronic gadgets. In current digital era, managing e-waste has become universal concern. From the viewpoint of persisting lacuna of e-waste managing methods, the current study is designed to fabricate an eco-friendly e-waste treatment with native soil bacteria employing an enrichment culture method. In the presence of e-waste, indigenous soil microbes were stimulated to degrade e-waste. Microbial cultures were isolated using enrichment medium containing acrylonitrile-butadiene styrene (ABS) as the primary carbon source. Priestia aryabhattai MGP1 was found to be the most dominant e-polymer degrading bacterial isolate, as it was reported to degrade ABS plastic in disposed-off television casings. Furthermore, to increase degradation potential of MGP1, Response Surface Methodology (RSM) was adopted which resulted in optimized conditions (pH 7, shaking-speed 120 rpm, and temperature 30 °C), for maximum degradation (18.88%) after 2 months. The structural changes induced by microbial treatment were demonstrated by comparing the findings of Field emission scanning electron microscopy (FESEM) images and Fourier Transform Infrared (FTIR) spectra confirming the disappearance of ≡ C─H peaks along with C-H, C=C and C ≡N bond destabilization following degradation. Energy-dispersive X-ray (EDX) analyzers of the native and decomposed e-polymer samples revealed a considerable loss in elemental weight % of oxygen by 8.4% and silica by 0.5%. Magnesium, aluminium and chlorine which were previously present in the untreated sample, were also removed after treatment by the bacterial action. When seeds of Vigna radiata were screened using treated soil in the presence of both e-waste and the chosen potent bacterial strain, it was also discovered that there was reduced toxicity in terms of improved germination and growth metrics as a phytotoxicity criterion.

Isotope Labeling Mass Spectrometry to Quantify Endogenous and Exogenous DNA Adducts and Metabolites of 1,3-Butadiene In Vivo.

Human exposure to known carcinogen 1,3-butadiene (BD) is common due to its high concentrations in automobile exhaust, cigarette smoke, and forest fires, as well as its widespread use in the polymer industry. The adverse health effects of BD are mediated by epoxide metabolites such as 3,4-epoxy-1-butene (EB), which reacts with DNA to form 1-hydroxyl-3-buten-1-yl adducts on DNA nucleobases. EB-derived mercapturic acids (1- and 2-(N-acetyl-l-cysteine-S-yl)-1-hydroxybut-3-ene (MHBMA) and N-acetyl-S-(3,4-dihydroxybutyl)-l-cysteine (DHBMA)) and urinary N7-(1-hydroxyl-3-buten-1-yl) guanine DNA adducts (EB-GII) have been used as biomarkers of BD exposure and cancer risk in smokers and occupationally exposed workers. However, low but significant levels of MHBMA, DHBMA, and EB-GII have been reported in unexposed cultured cells, animals, and humans, suggesting that these metabolites and adducts may form endogenously and complicate risk assessment of butadiene exposure. In the present work, stable isotope labeling in combination with high-resolution mass spectrometry was employed to accurately quantify endogenous and exogenous butadiene metabolites and DNA adducts in vivo. Laboratory rats were exposed to 0.3, 0.5, or 3 ppm of BD-d6 by inhalation, and the amounts of endogenous (d0) and exogenous (d6) DNA adducts and metabolites were quantified in tissues and urine by isotope dilution capillary liquid chromatography/high resolution electrospray ionization tandem mass spectrometry (capLC-ESI-HRMS/MS). Our results reveal that EB-GII adducts and MHBMA originate exclusively from exogenous exposure to BD, while substantial amounts of DHBMA are formed endogenously. Urinary EB-GII concentrations were associated with genomic EB-GII levels in tissues of the same animals. Our findings confirm that EB-GII and MHBMA are specific biomarkers of exposure to BD, while endogenous DHBMA predominates at sub-ppm exposures to BD.

Fabrication of Hydroxy-Terminated Polybutadiene with Piezoelectric Property by Functionalized Branch Chain Modification.

Hydroxyl-terminated polybutadiene (HTPB)-based piezoelectric polymer (m-HTPB) is prepared for the first time by functionalized branch chain modification strategy. In the presence of HTPB with >98.8% cis-1,4 content, the C=C bond partly breaks down, and functionalized acetylferrocene groups are introduced to the cis-1,4 polybutadiene branch chain, retaining the high cis-1,4 content of HTPB. The whole process is conducted under mild conditions, without complicated manipulations. The microstructure and molecular weight of m-HTPB are characterized by Fourier-transform infrared (FTIR) spectra, 1H or 13C nuclear magnetic resonance spectrum (NMR), and gel permeation chromatography (GPC). The thermal properties of HTPB and m-HTPB are determined by differential scanning calorimetry (DSC). Electrochemical investigations reveal that m-HTPB exhibits higher conductance compared with HTPB. The m-HTPB flexible piezoelectric polymer is further used for in situ and real-time pressure monitoring. This simple and effective strategy provides a promising polymeric material for flexible piezoelectric sensors.

Dichloro(2,2'-bipyridine)copper/MAO: An Active and Stereospecific Catalyst for 1,3-Diene Polymerization.

Dichloro(2,2'-bipyridine)copper was synthesized by reacting copper dichloride with bypyridine, and its behavior, in combination with methylaluminoxane (MAO), in the polymerization of butadiene, isoprene, 2,3-dimethyl-1,3 butadiene, and 3-methyl-1,3-pentadiene was examined. The purpose of this study is to find catalytic systems that are more sustainable than those currently used for the polymerization of butadiene and isoprene (e.g., Co and Ni), but that are comparable in terms of catalytic activity and selectivity. Predominantly, syndiotactic 1,2 polybutadiene, crystalline syndiotactic 3,4 polyisoprene, crystalline syndiotactic 1,2 poly(3-methyl-1,3-pentadiene), and crystalline cis-1,4 poly(2,3-dimethyl-1,3-butadiene) were obtained in a manner similar to that observed with the analogous iron complex. As far as we know, the investigated catalytic system represents the first example of a copper-based catalyst in the field of stereospecific polymerization. Given the great availability of copper, its extremely low toxicity (and therefore high sustainability), and the similarity of its behavior to that of iron, the result obtained seems to us of considerable interest and worthy of further investigation.

Peering down the sink: A review of isoprene metabolism by bacteria.

Isoprene (2-methyl-1,3-butadiene) is emitted to the atmosphere each year in sufficient quantities to rival methane (>500 Tg C yr-1 ), primarily due to emission by trees and other plants. Chemical reactions of isoprene with other atmospheric compounds, such as hydroxyl radicals and inorganic nitrogen species (NOx ), have implications for global warming and local air quality, respectively. For many years, it has been estimated that soil-dwelling bacteria consume a significant amount of isoprene (~20 Tg C yr-1 ), but the mechanisms underlying the biological sink for isoprene have been poorly understood. Studies have indicated or confirmed the ability of diverse bacterial genera to degrade isoprene, whether by the canonical iso-type isoprene degradation pathway or through other less well-characterized mechanisms. Here, we review current knowledge of isoprene metabolism and highlight key areas for further research. In particular, examples of isoprene-degraders that do not utilize the isoprene monooxygenase have been identified in recent years. This has fascinating implications both for the mechanism of isoprene uptake by bacteria, and also for the ecology of isoprene-degraders in the environments.

Diaza-1,3-butadienes as Useful Intermediate in Heterocycles Synthesis.

Many heterocyclic compounds can be synthetized using diaza-1,3-butadienes (DADs) as key structural precursors. Isolated and in situ diaza-1,3-butadienes, produced from their respective precursors (typically imines and hydrazones) under a variety of conditions, can both react with a wide range of substrates in many kinds of reactions. Most of these reactions discussed here include nucleophilic additions, Michael-type reactions, cycloadditions, Diels-Alder, inverse electron demand Diels-Alder, and aza-Diels-Alder reactions. This review focuses on the reports during the last 10 years employing 1,2-diaza-, 1,3-diaza-, 2,3-diaza-, and 1,4-diaza-1,3-butadienes as intermediates to synthesize heterocycles such as indole, pyrazole, 1,2,3-triazole, imidazoline, pyrimidinone, pyrazoline, -lactam, and imidazolidine, among others. Fused heterocycles, such as quinazoline, isoquinoline, and dihydroquinoxaline derivatives, are also included in the review.

Non-π-Allyl Mechanism for the 1,4-cis-Butadiene Polymerization: Theoretical Study of Polymerization via Insertion of Butadiene into Al-C Bond with Cationic Gadolinium Metallocene.

This paper reports a computational study on the specific 1,4-cis polymerization of butadiene catalyzed by the cationic gadolinium metallocene [(C5 Me5 )2 Gd][B(C6 F5 )4 ] combined with excess amount of Al(i Bu)3 . Because this reaction system has no initial Gd-alkyl bond, a mechanism with conventional coordinative chain transfer polymerization (CCTP) is not feasible. Density functional theory (DFT) analyses indicate a novel mechanism in which the cationic Gd plays a crucial role by assisting butadiene insertion into one of the Al-C bond of Al(i Bu)3 . The proposed butadiene polymerization mechanism can account for the specific 1,4-cis selectivity of this catalyst system.

Stereo- and Site-Selective Crotylation of Alcohol Proelectrophiles via Ruthenium-Catalyzed Hydrogen Auto-Transfer Mediated by Methylallene and Butadiene.

Iodide-bound ruthenium-JOSIPHOS complexes catalyze the redox-neutral C-C coupling of primary alcohols with methylallene (1,2-butadiene) or 1,3-butadiene to form products of anti-crotylation with good to excellent levels of diastereo- and enantioselectivity. Distinct from other methods, direct crotylation of primary alcohols in the presence of unprotected secondary alcohols is possible, enabling generation of spirastrellolide B (C9-C15) and leucascandrolide A (C9-C15) substructures in significantly fewer steps than previously possible.

An updated lymphohematopoietic and bladder cancers risk evaluation for occupational and environmental exposures to 1,3-butadiene.

EPA designated 1,3-butadiene (BD) as a high priority chemical in December 2019 and is presently performing an evaluation under the Toxic Substances Control Act (TSCA). EPA's cancer dose-response assessment for BD was published in 2002 and was primarily based on a study on workers exposed to BD in the North American synthetic Styrene-Butadiene Rubber (SBR) Industry developed by the University of Alabama at Birmingham (UAB). EPA relied upon a Poisson regression of leukemia mortality data from this cohort (hereinafter referred to as the SBR study) to estimate the cancer potency of BD. At the time, the SBR cohort included more than 15,000 male workers that were followed up through 1991. The SBR cohort has undergone multiple updates over the past two decades. Most recently, Sathiakumar et al. (2021a, b) published an update, with 18 more years of follow up in addition to approximately 5,000 female workers and updated exposure concentration estimates. Recent EPA assessments (e.g., for ethylene oxide, USEPA 2016) based on epidemiological studies use Cox proportional hazards models because they offer better control of the effect of age in cancer development and are less restrictive than Poisson regression models. Here, we develop exposure-response models using standard Cox proportional hazards regression. We explore the relationship between six endpoints (all leukemia, lymphoid leukemia, myeloid leukemia, multiple myeloma, non-Hodgkin's lymphoma, and bladder cancer) and exposures to BD using the most recent exposure metrics and the most recent update of the SBR study. After adjusting for statistically significant covariates, an upper 95% confidence level on the cancer potency based on leukemia derived herein is 0.000086 per ppm, which is approximately 1,000-fold less than EPA's (2002) estimate of 0.08 per ppm and about 10-fold less than TCEQ's (2008) estimate of 0.0011 per ppm.

Emission Profiles of Volatiles during 3D Printing with ABS, ASA, Nylon, and PETG Polymer Filaments.

In this short communication we characterize the emission of volatile organic compounds (VOCs) from fused filament fabrication (FFF) 3D printing using four polymer materials, namely polyethylene terephthalate glycol-modified (PETG), acrylonitrile styrene acrylate (ASA), Nylon, and acrylonitrile butadiene styrene (ABS). Detailed emission profiles are obtained during thermal degradation of the polymers as a function of temperature and also in real-time during 3D printing. Direct quantitative measurement was performed using proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS). Qualitative determination of the volatiles emitted from the printed elements at various temperatures was accomplished using gas chromatography-mass spectrometry (GC-MS). The emission rates of VOCs differ significantly between the different polymer filaments, with the emission from Nylon and PETG more than an order of magnitude lower than that of ABS.

Unidirectional Perpendicularly Aligned Lamella-Structured Oligosaccharide (A) ABA Triblock Elastomer (B) Thin Films Utilizing Triazolium+/TFSI- Ionic Nanochannels.

We designed and synthesized high χ-low N-maltoheptaose-(triazolium+/N(SO2CF3)2-)-polyisoprene-(triazolium+/N(SO2CF3)2-)-maltoheptaose ABA triblock elastomers featuring triazolium+/N(SO2CF3)2- (TFSI-) counteranion ionic interfaces separating their constituting polymeric sub-blocks. Spin-coated and solvent-vapor-annealed (SVA) MH1.2k-(T+/TFSI-)-PI4.3k-(T+/TFSI-)-MH1.2k thin films demonstrate interface-induced charge cohesion through ca. 1 nm "thick" ionic nanochannels which facilitate the self-assembly of a perpendicularly aligned lamellar structure. Atomic force microscopy (AFM) and (grazing-incidence) small-angle X-ray scattering ((GI)SAXS) characterizations of MH1.2k-(T+/TFSI-)-PI4.3k-(T+/TFSI-)-MH1.2k and pristine triBCP analogous thin films revealed sub-10 nm block copolymer (BCP) self-assembly and unidirectionally aligned nanostructures developed over several µm2 areas. Solvated TFSI- counterions enhance the oligosaccharide sub-block packing during SVA. The overall BCP phase behavior was mapped through SAXS characterizations comparing di- vs triblock polymeric architectures, a middle PI sub-block with two different molecular masses, and TFSI- or I- counteranion effects. This work highlights the benefits of inducing single-point electrostatic interactions within chemical structures of block copolymers to master the long-range self-assembly of prescribed morphologies.

Characterization of population variability of 1,3-butadiene derived protein adducts in humans and mice.

1,3-butadiene is a known human carcinogen and a chemical to which humans are exposed occupationally and through environmental pollution. Inhalation risk assessment of 1,3-butadiene was completed several decades ago before data on molecular biomarkers of exposure and effect have been reported from both human studies of workers and experimental studies in mice. To improve risk assessment of 1,3-butadiene, the quantitative characterization of uncertainty in estimations of inter-individual variability in cancer-related effects is needed. For this, we ought to take advantage of the availability of the data on 1,3-butadiene hemoglobin adducts, well established biomarkers of the internal dose of the reactive epoxides, from several large-scale human studies and from a study in a Collaborative Cross mouse population. We found that in humans, toxicokinetic uncertainty factor for 99th percentile of the population ranged from 3.27 to 7.9, depending on the hemoglobin adduct. For mice, these values ranged from less than 2 to 7.51, depending on the dose and the adduct. Quantitative estimated from this study can be used to reduce uncertainties in the parameter estimates used in the models to derive the inhalation unit risk, as well as to address possible differences in variability in 1,3-butadiene metabolism that may be dose-related.