Herramienta basada en código abierto para el cálculo de blindaje en las instalaciones de Medicina Nuclear / Open Source Based Tool for Shielding Calculation in Nuclear Medicine Installations

Uno de los requerimientos indispensables en el diseño de las instalaciones donde se trabaja con radiación ionizante es la determinación del espesor adecuado de las paredes, pisos, techo y puertas de los locales, que garanticen dosis por debajo de las restricciones establecidas por la autoridad regulatoria. El objetivo del presente trabajo es desarrollar una herramienta interactiva, libre y de código abierto para calcular los blindajes requeridos en una instalación de Medicina Nuclear. En el código, desarrollado en Phyton utilizando el entorno interactivo Jupiter Notebook, se incluyó el análisis tanto para Tomografía por Emisión de Fotón Único como para Tomografía por Emisión de Positrones. La herramienta fue implementada para el cálculo de los blindajes de un departamento de Medicina Nuclear del Centro Internacional de Restauración Neurológica (CIREN). Esta herramienta libre y de código abierto facilita los cálculos de blindaje aumentando la velocidad, lo que contribuye a lograr una optimización de la protección radiológica, pero también puede usarse como herramienta pedagógica(AU)

One of the indispensable requirements in the design of the facilities where ionizing radiation is used is the determination of the adequate thickness of the walls, floors, ceiling and doors of the premises, which guarantee doses below the restrictions established by the regulatory authority. The goal of this work is to develop an interactive, free and open source tool to calculate the shields required in a Nuclear Medicine installation. Analysis for both Single Photon Emission Tomography and Positron Emission Tomography was included in the code, developed in Phyton using the interactive Jupiter Notebook environment. The tool was implemented to calculate the shields of a Nuclear Medicine department of the International Center for Neurological Restoration (CIREN). This free and open source tool facilitates shielding calculations by increasing speed, which contributes to the optimization of radiation protection, but can also be used as a pedagogical tool(AU)

Advocating for improvements to building codes for the population's health.

Construction codes are a major component of building codes. They provide normative standards by which buildings are designed, built, altered, inspected, and assessed. Persistently high, fall-related injury rates on stairs and in bathrooms indicate that public health advocacy is needed to enhance the passive protection of these codes. Targets and strategies for code improvement advocacy by public health professionals, organizations, and associations are discussed. Approaches pertinent to describing the problem, proposing solutions, and framing the message are considered. Attention is given to issues that may be particularly challenging for advocates. These include the need to address minimum standards, tackling gaps in injury-related surveillance data that may be used by the building industry to rebut proposed code changes, describing how construction code changes align with other progressive legal tools that shape our built environments, and considering which sector pays and which sector benefits from code improvements. Ergonomic and epidemiologic evidence indicates that construction code improvements can reduce falls and fall-related injuries. Public health advocates have an important role to play in strengthening these codes.

Does Europe Need an EU Product Safety Directive for Access Scaffolding?

The main requirement established for the development of European Union product safety directives is to ensure a high level of safety for users. This research aims to analyze whether Europe needs a product safety directive for scaffolding and identify the main factors to be defined in public policies on the use of standardized scaffolding in the absence of such a directive. The principal types of scaffolding were reviewed, along with European regulations, and their risk levels. Finally, a qualitative study using a panel of experts was conducted to determine the differences between types of scaffolding and whether the enactment of such a directive would be justified. Key results were that the risk level associated with scaffolding positioned it third or fourth between material agents more hazardous in relation to falls from height. There is no existing product safety directive for scaffolding, despite the fact that there are directives for other products less dangerous than or as dangerous as scaffolding. However, there are noncompulsory standards EN 12810-1-2 and EN 12811-1-2-3-4 for scaffolding, which would form the basis of the essential requirements contained in a directive if it were created. The experts highlighted significant differences between "standardized" and "nonstandardized" scaffolding, with higher safety levels and productivity, and better maintenance, inspection, assembly, and dismantling associated with the former, and lower costs with the latter. Thus, they found that the enacting of an EU product safety directive for scaffolding would be justifiable, and in its absence supported the promotion of the use of standardized scaffolding.

Advances in Residential Design Related to the Influence of Geomagnetism.

Since the origin of the Modern Movement, there has been a basic commitment to improving housing conditions and the well-being of occupants, especially given the prediction that 2/3 of humanity will reside in cities by 2050. Moreover, a compact model of the city with tall buildings and urban densification at this scale will be generated. Continuous constructive and technological advances have developed solid foundations on safety, energy efficiency, habitability, and sustainability in housing design. However, studies on improving the quality of life in these areas continue to be a challenge for architects and engineers. This paper seeks to contribute health-related information to the study of residential design, specifically the influence of the geomagnetic field on its occupants. After compiling information on the effects of geomagnetic fields from different medical studies over 23 years, a case study of a 16-story high-rise building is presented, with the goal of proposing architectural design recommendations for long-term occupation in the same place. The purpose of the present work is three-fold: first, to characterize the geomagnetic field variability of buildings; second, to identify the causes and possible related mechanisms; and third, to define architectural criteria on the arrangement of uses and constructive elements for housing.

Local health rules and building regulations: a survey on local hygiene and building regulations in Italian municipalities.

INTRODUCTION: WHO has highlighted the need to strengthen the relationship between health and built environment factors, such as inappropriate housing conditions. Local Health Rules (LHRs) and Building Regulations (BRs) are tools which provide safety and building hygiene in construction practices. Currently the Italian Government is considering to establish a National Building Regulation and, related to the following purpose, this paper presents a survey on the status of adoption and updating of LHRs and BRs in Italian municipalities. METHODOLOGY: The current Italian state of LHRs, BRs and Municipal Development Plans (MDPs) have been examined by a survey considering a sample of about 550 cities, with different demo graphic and geographic features, starting from the previous research work by Signorelli et al. (1999). RESULTS: The analysis underlines a serious shortage of updated LHRs, especially in small and medium-sized municipalities whereas BRs and MDPs are widespread. Only 30% of them are previously approved and validated by Local Health Authorities. CONCLUSION: Starting from a survey, the present scenario of Building Regulations requires the introduction of further performance guidelines instead of normative ones and, therefore, the current actions to give rise to a National Building Regulation could be integrated by building hygiene contents of LHRs.

Building codes: An often overlooked determinant of health.

Although the vast majority of the world's population spends most of their time in buildings, building codes are not often thought of as 'determinants of health'. The standards that govern the design, construction, and use of buildings affect our health, security, safety, and well-being. This is true for dwellings, schools, and universities, shopping centers, places of recreation, places of worship, health-care facilities, and workplaces. We urge proactive engagement by the global public health community in developing these codes, and in the design and implementation of health protection and health promotion activities intended to reduce the risk of injury, disability, and death, particularly when due to poor building code adoption/adaption, application, and enforcement.

The science behind codes and standards for safe walkways: changes in level, stairways, stair handrails and slip resistance.

Walkway codes and standards are often created through consensus by committees based on a number of factors, including historical precedence, common practice, cost, and empirical data. The authors maintain that in the formulation of codes and standards that impact pedestrian safety, the results of pertinent scientific research should be given significant weight. This article examines many elements of common walkway codes and standards related to changes in level, stairways, stair handrails, and slip resistance. It identifies which portions are based on or supported by empirical data; and which could benefit from additional scientific research. This article identifies areas in which additional research, codes, and standards may be beneficial to enhance pedestrian safety.

Improving Management of Green Retrofits from a Stakeholder Perspective: A Case Study in China.

Green retrofits, which improve the environment and energy efficiency of buildings, are considered a potential solution for reducing energy consumption as well as improving human health and productivity. They represent some of the riskiest, most complex, and most uncertain projects to manage. As the foundation of project management, critical success factors (CSFs) have been emphasized by previous research. However, most studies identified and prioritized CSFs independently of stakeholders. This differs from the reality, where the success of green retrofits is tightly interrelated to the stakeholders of projects. To improve the analysis from a stakeholder perspective, the present study proposed an innovative method based on a two-mode social network analysis to integrate CSF analysis with stakeholders. The results of this method can provide further understanding of the interactions between stakeholders and CSFs, and the underlying relationship among CSFs through stakeholders. A pilot study was conducted to apply the proposed method and assess the CSFs for green retrofits in China. The five most significant CSFs are identified in the management of green retrofit. Furthermore, the interrelations between stakeholders and CSFs, coefficient and clusters of CSFs are likewise discussed.

A new urban planning code's impact on walking: the residential environments project.

OBJECTIVES: We examined whether people moving into a housing development designed according to a state government livable neighborhoods subdivision code engage in more walking than do people who move to other types of developments. METHODS: In a natural experiment of 1813 people building homes in 73 new housing developments in Perth, Western Australia, we surveyed participants before and then 12 and 36 months after moving. We measured self-reported walking using the Neighborhood Physical Activity Questionnaire and collected perceptions of the environment and self-selection factors. We calculated objective measures of the built environment using a Geographic Information System. RESULTS: After relocation, participants in livable versus conventional developments had greater street connectivity, residential density, land use mix, and access to destinations and more positive perceptions of their neighborhood (all P < .05). However, there were no significant differences in walking over time by type of development (P > .05). CONCLUSIONS: Implementation of the Livable Neighborhoods Guidelines produced more supportive environments; however, the level of intervention was insufficient to encourage more walking. Evaluations of new urban planning policies need to incorporate longer term follow-up to allow time for new neighborhoods to develop.

[Modern problems of the application of sanitary regulations concerning sanitary protection zones and sanitary classification of enterprises, buildings and other facilities].

In this paper there was performed an analysis of the application of sanitary norms and rules concerning sanitary protective zones and sanitary classification of enterprises, buildings and other facilities, including requirements for the sufficiency and accuracy of information in the performance of projects in sanitary protection zone (SPZ). There is presented an analysis of regulations that set requirements for implementation of mapping works in drafting the SPZ. The design of the SPZ was shown to be, on the one hand, the element of territorial planning subjects of the Russian Federation, on the other hand, the object of capital construction. The substantiations of requirements for graphic and text content, structure, and composition of data, sources of their obtaining, methods of data convergence are reported. There are revealed inconsistencies in Sanitary Regulations and Norms (SanPins) and in their relationship with the Town Planning and Land Code and other laws, and regulations adopted in their development.

Defining indoor heat thresholds for health in the UK.

INTRODUCTION: It has been recognised that as outdoor ambient temperatures increase past a particular threshold, so do mortality/morbidity rates. However, similar thresholds for indoor temperatures have not yet been identified. Due to a warming climate, the non-sustainability of air conditioning as a solution, and the desire for more energy-efficient airtight homes, thresholds for indoor temperature should be defined as a public health issue. AIMS: The aim of this paper is to outline the need for indoor heat thresholds and to establish if they can be identified. Our objectives include: describing how indoor temperature is measured; highlighting threshold measurements and indices; describing adaptation to heat; summary of the risk of susceptible groups to heat; reviewing the current evidence on the link between sleep, heat and health; exploring current heat and health warning systems and thresholds; exploring the built environment and the risk of overheating; and identifying the gaps in current knowledge and research. METHODS: A global literature search of key databases was conducted using a pre-defined set of keywords to retrieve peer-reviewed and grey literature. The paper will apply the findings to the context of the UK. RESULTS: A summary of 96 articles, reports, government documents and textbooks were analysed and a gap analysis was conducted. Evidence on the effects of indoor heat on health implies that buildings are modifiers of the effect of climate on health outcomes. Personal exposure and place-based heat studies showed the most significant correlations between indoor heat and health outcomes. However, the data are sparse and inconclusive in terms of identifying evidence-based definitions for thresholds. Further research needs to be conducted in order to provide an evidence base for threshold determination. CONCLUSIONS: Indoor and outdoor heat are related but are different in terms of language and measurement. Future collaboration between the health and building sectors is needed to develop a common language and an index for indoor heat and health thresholds in a changing climate.

Developing and implementing the Active Design Guidelines in New York City.

Physical inactivity is a leading cause of death in the United States and globally and is also associated with several additional leading causes of death, including obesity, high blood pressure and high blood glucose. The built environment plays a critical role in promoting or discouraging physical activity among adults and children. To create a healthier and more physically active city, a working group comprising several New York City agencies, including the Departments of Design and Construction, Health and Mental Hygiene, Transportation and City Planning, and in collaboration with design organizations and academics, published the Active Design Guidelines (ADG; ) in January 2010. The ADG is a manual of evidence-based and best-practice strategies for increasing physical activity in the design and construction of neighborhoods, streets and buildings. The commentary discusses key activities and events leading up to the publication as well as current implementation activities. It also shares the lessons learned that could assist other communities interested in improving their built environments in developing and implementing similar activities and initiatives.