Comprehensive characterization of organics in oil sands process water in constructed mesocosms utilizing multiple analytical methods.

This study aims to provide a thorough characterization of dissolved organics in oil sands process water (OSPW) in field-based aquatic mesocosms at both molecular and bulk measurement levels using multiple analytical methods. In a 3-year outdoor mesocosm experiment, the analysis of naphthenic acid (NA) species was conducted using ultra-performance liquid chromatography time-of-flight mass spectrometry (UPLC-TOFMS). The results revealed the removal of both total NAs (38% and 35%) and classical NAs (O2-NAs, 58% and 49%) in undiluted and half-diluted OSPW, respectively. The increased ratios of oxidized NAs (O3-O6 NAs) to classical NAs suggested a transformation trend. The results also indicated that O2-NAs with higher carbon number and lower double bond equivalent (DBE) were more easily degraded in the mesocosm systems. Biomimetic extraction using solid-phase microextraction (BE-SPME) measurement displayed 26% (undiluted OSPW) and 30% (half-diluted OSPW) decrease in total bioavailable organics over 3 years. Naphthenic acids fraction compounds (NAFCs) obtained by liquid-liquid extraction (LLE) were also determined using Fourier transform infrared spectroscopy (FTIR). Reduction in acute toxicity for undiluted (43%) and half-diluted (26%) OSPW was observed over 3 years, which are well correlated with the decreases of NAs and BE-SPME concentrations. Moreover, BE-SPME values were found to be linearly correlated with total NAs concentrations (r = 0.96) and NAFCs (r = 0.96). Additionally, the linear relationships of individual O2-O6 NA species and BE-SPME concentrations unveiled the changes in the relative abundances of O2-O6 NA species in total bioavailable organics over time in the mesocosms. The present study has provided comprehensive insights by integrating various analytical methods, contributing valuable information for assessing the effectiveness of aquatic mesocosm systems in studying the temporal changes of organics in OSPW.

Dynamics of severe accidents in the oil & gas energy sector derived from the authoritative ENergy-related severe accident database.

Organized into a global network of critical infrastructures, the oil & gas industry remains to this day the main energy contributor to the world's economy. Severe accidents occasionally occur resulting in fatalities and disruption. We build an oil & gas accident graph based on more than a thousand severe accidents for the period 1970-2016 recorded for refineries, tankers, and gas networks in the authoritative ENergy-related Severe Accident Database (ENSAD). We explore the distribution of potential chains-of-events leading to severe accidents by combining graph theory, Markov analysis and catastrophe dynamics. Using centrality measures, we first verify that human error is consistently the main source of accidents and that explosion, fire, toxic release, and element rupture are the principal sinks, but also the main catalysts for accident amplification. Second, we quantify the space of possible chains-of-events using the concept of fundamental matrix and rank them by defining a likelihood-based importance measure γ. We find that chains of up to five events can play a significant role in severe accidents, consisting of feedback loops of the aforementioned events but also of secondary events not directly identifiable from graph topology and yet participating in the most likely chains-of-events.

A Review of Advanced Molecular Engineering Approaches to Enhance the Thermostability of Enzyme Breakers: From Prospective of Upstream Oil and Gas Industry.

During the fracture stimulation of oil and gas wells, fracturing fluids are used to create fractures and transport the proppant into the fractured reservoirs. The fracturing fluid viscosity is responsible for proppant suspension, the viscosity can be increased through the incorporation of guar polymer and cross-linkers. After the fracturing operation, the fluid viscosity is decreased by breakers for efficient oil and gas recovery. Different types of enzyme breakers have been engineered and employed to reduce the fracturing fluid's viscosity, but thermal stability remains the major constraint for the use of enzymes. The latest enzyme engineering approaches such as direct evolution and rational design, have great potential to increase the enzyme breakers' thermostability against high temperatures of reservoirs. In this review article, we have reviewed recently advanced enzyme molecular engineering technologies and how these strategies could be used to enhance the thermostability of enzyme breakers in the upstream oil and gas industry.

Ecotoxicological impacts of oil sand mining activity to endemic caged mussels Pyganodon grandis.

The intense mining extraction of oil sand (OS) has increased over the last few decades, raising concerns about the release of OS contaminants and toxicity in resident aquatic organisms in the Athabasca River (Alberta, Canada). To address this, endemic Pyganodon grandis mussels were caged for 6 weeks at various upstream and downstream sites of industrial OS mining activities. Post-exposure mussels were then analyzed for light/medium/heavy polyaromatic hydrocarbons (PAHs) in tissues, general health (weight to length ratio, growth rate, air survival time), biotransformation (cytochrome P4501A and 3A and glutathione S-transferase activities), oxidative stress/inflammation (lipid peroxidation-LPO and arachidonate cyclooxygenase-COX), genotoxicity (DNA strand breaks), and gonad status (triglycerides, GSI and vitellogenin-like proteins). The following effects significantly differed between OS mining area and natural/background sites: health condition, growth rate, air survival time, COX (immune/inflammation) activity, P4501A/GST activity, LPO and DNA breaks in the digestive gland and vitellogenin-like proteins in the gonad. Correlation analysis revealed that the biochemical responses were scaled to at least one of the following impacts at the individual level: air survival time, weight to length ratio, growth rate and vitellogenin-like proteins. These indices were therefore identified as key adverse outcome pathways of mussels impacted by OS mining activities. Based on the relative levels of light/medium/heavy PAHs in tissues, the observed effects appears to be associated rather to the disturbance of OS in this area than contamination from OS tailing ponds leaching into the aquatic environment.

Supramolecular dynamic binary complexes with pH and salt-responsive properties for use in unconventional reservoirs.

Hydraulic fracturing of unconventional reservoirs has seen a boom in the last century, as a means to fulfill the growing energy demand in the world. The fracturing fluid used in the process plays a substantial role in determining the results. Hence, several research and development efforts have been geared towards developing more sustainable, efficient, and improved fracturing fluids. Herein, we present a dynamic binary complex (DBC) solution, with potential to be useful in the hydraulic fracturing domain. It has a supramolecular structure formed by the self-assembly of low molecular weight viscosifiers (LMWVs) oleic acid and diethylenetriamine into an elongated entangled network under alkaline conditions. With less than 2 wt% constituents dispersed in aqueous solution, a viscous gel that exhibits high viscosities even under shear was formed. Key features include responsiveness to pH and salinity, and a zero-shear viscosity that could be tuned by a factor of ~280 by changing the pH. Furthermore, its viscous properties were more pronounced in the presence of salt. Sand settling tests revealed its potential to hold up sand particles for extended periods of time. In conclusion, this DBC solution system has potential to be utilized as a smart salt-responsive, pH-switchable hydraulic fracturing fluid.

Long-Term Biocide Efficacy and Its Effect on a Souring Microbial Community.

Reservoir souring, which is the production of H2S mainly by sulfate-reducing microorganisms (SRM) in oil reservoirs, has been a long-standing issue for the oil industry. While biocides have been frequently applied to control biogenic souring, the effects of biocide treatment are usually temporary, and biocides eventually fail. The reasons for biocide failure and the long-term response of the microbial community remain poorly understood. In this study, one-time biocide treatments with glutaraldehyde (GA) and an aldehyde-releasing biocide (ARB) at low (100 ppm) and high (750 ppm) doses were individually applied to a complex SRM community, followed by 1 year of monitoring of the chemical responses and the microbial community succession. The chemical results showed that souring control failed after 7 days at a dose of 100 ppm regardless of the biocide type and lasting souring control for the entire 1-year period was achieved only with ARB at 750 ppm. Microbial community analyses suggested that the high-dose biocide treatments resulted in 1 order of magnitude lower average total microbial abundance and average SRM abundance, compared to the low-dose treatments. The recurrence of souring was associated with reduction of alpha diversity and with long-term microbial community structure changes; therefore, monitoring changes in microbial community metrics may provide early warnings of the failure of a biocide-based souring control program in the field. Furthermore, spore-forming sulfate reducers (Desulfotomaculum and Desulfurispora) were enriched and became dominant in both GA-treated groups, which could cause challenges for the design of long-lasting remedial souring control strategies. IMPORTANCE Reservoir souring is a problem for the oil and gas industry, because H2S corrodes the steel infrastructure, downgrades oil quality, and poses substantial risks to field personnel and the environment. Biocides have been widely applied to remedy souring, but the long-term performance of biocide treatments is hard to predict or to optimize due to limited understanding of the microbial ecology affected by biocide treatment. This study investigates the long-term biocide performance and associated changes in the abundance, diversity, and structure of the souring microbial community, thus advancing the knowledge toward a deeper understanding of the microbial ecology of biocide-treated systems and contributing to the improvement of current biocide-based souring control practices. The study showcases the potential application of incorporating microbial community analyses to forecast souring, and it highlights the long-term consequences of biocide treatment in the microbial communities, with relevance to both operators and regulators.

Shale oil production and groundwater: What can we learn from produced water data?

As oil production in the Permian Basin surges, the impact of shale production on groundwater resources has become a growing concern. Most existing studies focus on the impact of shale production on shallow freshwater aquifers. There is little understanding of the shale development's impact on other groundwater resources (e.g., deep carbonate aquifers and deep basin meteoric aquifers). The possible natural hydraulic connections between shallow aquifers and formation water suggest such an impact can be consequential. This study explores the relationship between shale production and groundwater using produced water (PW) samples from active unconventional oil wells. Focusing on the most productive portion of the Permian Basin-the four-county region in Southeast New Mexico between 2007 and 2016, a large produced water dataset allows us to analyze the conditional correlations between shale oil production and PW constituents. The results suggest that (1) expanding from primarily conventional wells to unconventional wells during the recent shale boom has led to dramatic increases of the TDS, chloride, sodium, and calcium levels in groundwater (i.e., producing formation). (2) Nearby oil well density positively correlates with the TDS, chloride, and sodium levels in the PW samples.

A robust fuzzy logic-based model for predicting the critical total drawdown in sand production in oil and gas wells.

Sand management is essential for enhancing the production in oil and gas reservoirs. The critical total drawdown (CTD) is used as a reliable indicator of the onset of sand production; hence, its accurate prediction is very important. There are many published CTD prediction correlations in literature. However, the accuracy of most of these models is questionable. Therefore, further improvement in CTD prediction is needed for more effective and successful sand control. This article presents a robust and accurate fuzzy logic (FL) model for predicting the CTD. Literature on 23 wells of the North Adriatic Sea was used to develop the model. The used data were split into 70% training sets and 30% testing sets. Trend analysis was conducted to verify that the developed model follows the correct physical behavior trends of the input parameters. Some statistical analyses were performed to check the model's reliability and accuracy as compared to the published correlations. The results demonstrated that the proposed FL model substantially outperforms the current published correlations and shows higher prediction accuracy. These results were verified using the highest correlation coefficient, the lowest average absolute percent relative error (AAPRE), the lowest maximum error (max. AAPRE), the lowest standard deviation (SD), and the lowest root mean square error (RMSE). Results showed that the lowest AAPRE is 8.6%, whereas the highest correlation coefficient is 0.9947. These values of AAPRE (<10%) indicate that the FL model could predicts the CTD more accurately than other published models (>20% AAPRE). Moreover, further analysis indicated the robustness of the FL model, because it follows the trends of all physical parameters affecting the CTD.

Design of facile technology for the efficient removal of hydroxypropyl guar gum from fracturing fluid.

With the increasing demand for energy, fracturing technology is widely used in oilfield operations over the last decades. Typically, fracturing fluids contain various additives such as cross linkers, thickeners and proppants, and so forth, which makes it possess the properties of considerably complicated components and difficult processing procedure. There are still some difficult points needing to be explored and resolved in the hydroxypropyl guar gum (HPG) removal process, e.g., high viscosity and removal of macromolecular organic compounds. Our works provided a facile and economical HPG removal technology for fracturing fluids by designing a series of processes including gel-breaking, coagulation and precipitation according to the diffusion double layer theory. After this treatment process, the fracturing fluid can meet the requirements of reinjection, and the whole process was environment friendly without secondary pollution characteristics. In this work, the fracturing fluid were characterized by scanning electron microscopy (SEM), Energy dispersive X-ray (EDX), X-ray diffraction (XRD) and Fourier transformed infrared (FTIR) spectroscopy technologies, etc. Further, the micro-stabilization and destabilization mechanisms of HPG in fracturing fluid were carefully investigated. This study maybe opens up new perspective for HPG removal technologies, exhibiting a low cost and strong applicability in both fundamental research and practical applications.

Genotoxicity detection of oil-containing drill cuttings by Comet assay based on a demersal marine fish Mugilogobius chulae.

An enormous amount of oil-containing drill cuttings have been produced by the marine oil and gas industry. The environmental impacts of discharged drilling waste have been extensively studied. However, there is still an urgent need to develop alternative methods to identify the genotoxicity of untreated and treated drill waste in a timely manner before it is discharged. In this study, we developed a relatively rapid, sensitive, and accurate genotoxicity-detection method using Comet assay and the marine benthic goby Mugilogobius chulae. This goby is sensitive to a standard toxicant mitomycin C (MMC). The optimal exposure period for genotoxicity detection using M. chulae was determined. Three genotoxic indices (tail length (TL), tail DNA content (TD), and tail moment (TM)) were used to assess the effectiveness of high-temperature treatment of oil-contaminated waste. Untreated oil-containing drill cuttings exhibited the highest genotoxicity to goby cells. Genotoxicity was dramatically reduced after thermal treatment of drill cuttings at 350 °C and 500 °C. TD and TM exhibited significant correlation with the concentration of total petroleum hydrocarbons (TPHs)/total polycyclic aromatic hydrocarbons (PAHs) according to Pearson and Mantel correlation analyses (P values were <0.05). Using redundancy analysis (RDA) and variation partition analysis (VPA), the genotoxic effects of the drill cuttings were ascribed to total alkanes and specific groups of PAHs. In conclusion, this newly established biological model has the potential to be widely used to detect the genetic damage of untreated or treated oil-containing drill cuttings discharged into the marine environment.

Assessment of the potential ecological and human health risks of heavy metals in Ahvaz oil field, Iran.

The potential hazard to human health from exposure to heavy metals in surface soil was assessed using 66 soil samples collected from Ahvaz oil field. To this end, the contents of heavy metals were measured by the inductively coupled plasma spectroscopy (ICP-OES). Mean levels of As, Cd, Co, Cr, Cu, Ni, Pb, V, and Zn were 5.9, 0.4, 7.1, 36.5, 41.2, 39.8, 67.4, 31.5, and 77.6 mg/kg, respectively. Contents of all studied heavy metals, with the exception of Co, Cr, and V, were several times higher than that of baselines. Correlation coefficients and principal component analysis (PCA) identified two main groups as sources of heavy metals in the surface soil of Ahvaz oil-field. Metals such as Co, Cr, and V were observed to originate from natural sources and As, Cd, Cu, Ni, Pb, and Zn originated from anthropogenic sources such as petroleum leakage and the pollution caused by drilling mud from oil wells. Pb and Zn were of significantly high EF mean enrichment value, and Co, Cu, Cd, and As had high enrichment in surface soil. Pb, Cr, V, Zn, Co, Cu, Ni, and As had a low potential ecological risk (PER) whereas Cd had a moderate PER. The risk of carcinogenic and non-carcinogenic diseases was detected to be higher in children than in adults. The carcinogenic risk (Cr) calculation was more than 1 × 10-6 for children and adults. Additionally, the CR of Cr for both children and adults indicated risk under control conditions.

Composition of Xanthan gum produced by Xanthomonas campestris using produced water from a carbonated oil field through Raman spectroscopy.

Produced water (PW) is a by-product generated throughout oil exploration. Geological formation and geographical location of the reservoir influence its physical, chemical and biological characteristics. Xanthan gum (XG), an exopolysaccharide (EPS) produced by Xanthomonas campestris, has been widely used in enhanced oil recovery (EOR) technology because of its high viscosity, pseudoplastic behavior, stability in function of salinity, temperature and alkaline conditions. The production of XG may be affected by the composition of the PW, where the acetyl and pyruvyl radicals may be present in the mannoses. The aim of this study was to evaluate the composition of XG produced by X. campestris, particularly the amount of Xanthan, acetyl and pyruvyl groups, in culture mediums containing distilled (DW) or produced (PW) water in different concentrations, by means of dispersive Raman spectroscopy (1064 nm). The spectra of XG showed peaks referred to the main constituents of the Xanthan (glucose, mannose and glucuronic acid). Spectral features assigned to pyruvyl were seen in all samples mainly at ~1010 cm-1, with higher intensity when using DW and 25% PW. PCA loadings showed that the peaks assigned to pyruvyl are consistent to presence of sodium pyruvate (~1040/~1050 and ~ 1432 cm-1) and were higher in the samples obtained in 25% PW. ANOVA GLM applied to Raman peaks of interest (~1010 and ~ 1090 cm-1) and to PCA scores (Score 1 to Score 3) showed that both were influenced by the type of water used in the culture medium, where the XG were strongly reduced in the groups PW compared to DW while the pyruvyl content increased proportionally with the concentration of PW. The results suggest that the composition of the water used in the bacteria's culture medium influenced the composition of XG, including the amount of Xanthan and particularly the pyruvyl content, and therefore needs to be considered when using this approach of injecting XG in oil fields as pyruvyl content affects viscosity.

Geospatial analysis of the patterns of chemical exposures among biota in the Canadian Oil Sands Region.

Understanding the patterns of chemical exposure among biota across a landscape is challenging due to the spatial heterogeneity and complexity of the sources, pathways, and fate of the different chemicals. While spatially-driven relationships between contaminant sources and biota body burdens of a single chemical are commonly modelled, there has been little effort on modelling chemical mixtures across multiple wildlife species in the Canadian Oil Sands region. In this study, we used spatial principal components analysis (sPCA) to assess spatial patterns of the body burdens of 22 metals and Potentially Toxic Elements (PTEs) in 492 individual wildlife, including fur-bearing mammals, colonial waterbirds, and amphibians collected from the Canadian Oil Sands region in Canada. Spatial analysis and mapping both indicate that some of the complex exposures in the studied biota are distributed randomly across a landscape, which suggests background or non-point source exposures. In contrast, the pattern of exposure for seven metals and PTEs, including mercury, vanadium, lead, rubidium, lithium, strontium, and barium, exhibited a clustered pattern to the east of the open-pit mining area and in regions downstream of oil sands development which indicates point-source input. This analysis demonstrated useful methods for integrating monitoring datasets and identifying sources and potential drivers of exposure to chemical mixtures in biota across a landscape. These results can be used to support an adaptive monitoring program by identifying regions needing additional monitoring, health impact assessments, and possible intervention strategies.

Determination of phase-partitioning tracer candidates in production waters from oilfields based on solid-phase microextraction followed by gas chromatography-tandem mass spectrometry.

In the present document, we report the development of an analytical method consisting of a sequential direct-immersion/headspace solid-phase microextraction (DI-HS-SPME) followed by gas-phase chromatography and tandem mass spectrometry (GC-MS/MS) for simultaneous analysis of 4-chlorobenzyl alcohol, 2,6-dichlorobenzyl alcohol, 4-methoxybenzyl alcohol, 3,4-dimethoxybenzyl alcohol, pyridine, and 2,3-dimethylpyrazine in oilfield production waters. These compounds are under evaluation for use as phase-partitioning tracers in oil reservoirs. To the best of our knowledge, this is the first time SPME has been applied to the analysis of these compounds in production waters, or any other type of matrix where the compounds targeted are the base for a technical application. Relevant extraction parameters, such as the adsorbent phase of the fiber, direct immersion or headspace, addition of salt, temperature and time of extraction were investigated. The final optimal operation conditions consist on extracting 5 mL of sample at pH 9.0 with 1.8 g of NaCl with constant stirring during 5 minutes of DI-SPME followed by 15 minutes of HS-SPME at 70 °C using a DVB/CAR/PDMS (50/30 µm) fiber. The limits of quantification (LOQ), linearity, precision and accuracy of the method were evaluated. Analyses of the tracer compounds and recovery studies were also performed on production waters from 8 different oilfields of the Norwegian continental shelf. LOQs between 0.080 and 0.35 µg L-1 were obtained. The recovery yields of the method were consistently higher than 85% and RSDs less than 13%. None of the tracer compounds was found in the real samples processed, which is consistent with one of the requirements for an artificial tracer in an oilfield: absence or constant and low background in the traced fluid. The performance of the method developed, combined with its easiness to automate, introduce a new, accurate and cost-efficient technique to process the hundreds of samples required by an inter-well tracer test.

Physicochemical characteristics of oil-based cuttings from pretreatment in shale gas well sites.

Understanding the physicochemical characteristics of oil-based cuttings (OBCs) is an important foundation for subsequent treatment and management. The macro- and microscopic properties of white oil-based cuttings (WOBCs) and diesel-based cuttings (DBCs) after the different pretreatment steps have been assessed using scanning electron microscopy. The organic and inorganic compositions of OBCs have been analyzed using X-ray diffraction, Fourier-transform infrared spectrometry, and gas chromatography-mass spectrometry. Inorganic matter (SiO2, BaSO4, and CaCO3), alkanes, aromatic compounds, and water were the main components of OBCs. The organic content (26.14%) and alkane content of the WOBCs were higher than that of the DBCs, whereas for the inorganic content (70.87%), the reverse was true. The macro- and micromorphologies of OBCs were quite different because their oil and water contents were different. The oil contents of OBCs decreased in the order A1 (14.64%) > A3 (12.67%) > A2 (11.06%) and B1 (9.19%) > B3 (8.94%) > B2 (4.66%); the water contents decreased in the order A1 (2.99%) > A3 (2.19%) > A2 (1.09%) and B1 (2.30%) > B3 (1.87%) > B2 (1.09%). Moreover, a skid-mounted treatment technology for OBCs was proposed. The results can be a scientific guidance for the treatment and management of OBCs.

Naphthenic acid anaerobic biodegrading consortia enriched from pristine sediments underlying oil sands tailings ponds.

Seepage from oil sands tailings ponds (OSTP), which contain toxic naphthenic acids (NAs), can infiltrate into groundwater. Clay sediment layer beneath is a critical barrier for reducing the infiltration of NAs into the sand sediment layer, where groundwater channels reside. Biodegradation has great potential as a strategy for NAs removal, but little is known about NAs biodegradability and potential functional microbes in these pristine sediments. This study investigated the potential for anaerobic biodegradation of NAs by microbial consortia enriched from clay and sand sediments underlying OSTP, amended with either acid extracted organics or Merichem NAs, under nitrate- and sulfate-reducing conditions. Degradation of NAs only be detected after DOC concentration reached to steady state after 163 days. Microbial community analysis shows that different electron acceptors, sediment types, and NAs sources associated with specific microbial taxa and can explain 14.8, 13.9 % and 5% of variation of microbial community structures, respectively. The DOC and methane were the most important geochemical properties for microbial community variations. This study approved the potential capability of indigenous microbial communities from the pristine sediments in NA degradation, demonstrating the barrier function of pristine clay sediments underlying OSTP in prohibiting organic contaminants from entering into groundwater.

Effects of chemical fractions from an oil sands end-pit lake on reproduction of fathead minnows.

Oil sands process-affected water (OSPW) is a byproduct of bitumen extraction in the surface-mining oil sands industry in Alberta, Canada. Organic compounds in OSPW can be acutely or chronically toxic to aquatic organisms, so part of a long-term strategy for remediation of OSPW is ageing of water in artificial lakes, termed end-pit lakes. BaseMine Lake (BML) is the first oil sands end-pit lake, commissioned in 2012. At the time of its establishment, an effects-directed analysis of BML-OSPW showed that naphthenic acids and polar organic chemical species containing sulfur or nitrogen contributed to its acute lethality. However, the chronic toxicity of these same chemical fractions has not yet been investigated. In this work, the short-term fathead minnow reproductive bioassay was used to assess endocrine-system effects of two fractions of BML-OSPW collected in 2015. One of the fractions (F1) contained predominantly naphthenic acids, while the other (F2) contained non-acidic polar organic chemical species. Exposure of minnows to F1 or F2 at concentrations equivalent to 25% (v/v) of the 2015 BML-OSPW sample (5-15% of the 2012 BML-OSPW sample) did not alter reproductive performance, fertilization success, or concentrations of sex steroids in female or male minnows. Additionally, there were no significant differences in fertility, hatching success, or incidence of morphological indices of embryos collected on day 7 or 14 from exposed breeding trios. However, exposure of male fathead minnow to 25% (v/v) intact 2015 BML-OSPW resulted in a significantly greater hepatosomatic index. Exposure of fathead minnow to refined fractions of dissolved organic chemicals in 2015 BML-OSPW, or a 25% (v/v) of the intact mixture did not affect fertility or fecundity as measured by use of the 21-day reproductive bioassay. These data will be useful in setting future threshold criteria for OSPW reclamation and treatment.

Shale gas development has limited effects on stream biology and geochemistry in a gradient-based, multiparameter study in Pennsylvania.

The number of horizontally drilled shale oil and gas wells in the United States has increased from nearly 28,000 in 2007 to nearly 127,000 in 2017, and research has suggested the potential for the development of shale resources to affect nearby stream ecosystems. However, the ability to generalize current studies is limited by the small geographic scope as well as limited breadth and integration of measured chemical and biological indicators parameters. This study tested the hypothesis that a quantifiable, significant relationship exists between the density of oil and gas (OG) development, increasing stream water concentrations of known geochemical tracers of OG extraction, and the composition of benthic macroinvertebrate and microbial communities. Twenty-five headwater streams that drain lands across a gradient of shale gas development intensity were sampled. Our strategy included comprehensive measurements across multiple seasons of sampling to account for temporal variability of geochemical parameters, including known shale OG geochemical tracers, and microbial and benthic macroinvertebrate communities. No significant relationships were found between the intensity of OG development, shale OG geochemical tracers, or benthic macroinvertebrate or microbial community composition, whereas significant seasonal differences in stream chemistry were observed. These results highlight the importance of considering spatial and temporal variability in stream chemistry and biota and not only the presence of anthropogenic activities in a watershed. This comprehensive, integrated study of geochemical and biological variability of headwater streams in watersheds undergoing OG development provides a robust framework for examining the effects of energy development at a regional scale.

Candidatus Mcinerneyibacterium aminivorans gen. nov., sp. nov., the first representative of the candidate phylum Mcinerneyibacteriota phyl. nov. recovered from a high temperature, high salinity tertiary oil reservoir in north central Oklahoma, USA.

We report on the characterization of a novel genomic assembly (ARYD3) recovered from formation water (17.6% salinity) and crude oil enrichment amended by isolated soy proteins (0.2%), and incubated for 100 days under anaerobic conditions at 50°C. Phylogenetic and phylogenomic analysis demonstrated that the ARYD3 is unaffiliated with all currently described bacterial phyla and candidate phyla, as evident by the low AAI (34.7%), shared gene content (19.4%), and 78.9% 16S rRNA gene sequence similarity to Halothiobacillus neapolitanus, its closest cultured relative. Genomic characterization predicts a slow-growing, non-spore forming, and non-motile Gram-negative rod. Adaptation to high salinity is potentially mediated by the production of the compatible solutes cyclic 2,3-diphosphoglycerate (cDPG), α-glucosylglycerate, as well as the uptake of glycine betaine. Metabolically, the genome encodes primarily aminolytic capabilities for a wide range of amino acids and peptides. Interestingly, evidence of propionate degradation to succinate via methyl-malonyl CoA was identified, suggesting possible capability for syntrophic propionate degradation. Analysis of ARYD3 global distribution patterns identified its occurrence in a very small fraction of Earth Microbiome Project datasets examined (318/27,068), where it consistently represented an extremely rare fraction (maximum 0.28%, average 0.004%) of the overall community. We propose the Candidatus name Mcinerneyibacterium aminivorans gen. nov, sp. nov. for ARYD3T, with the genome serving as the type material for the novel family Mcinerneyibacteriaceae fam. nov., order Mcinerneyibacteriales ord. nov., class Mcinerneyibacteria class nov., and phylum Mcinerneyibacteriota phyl. nov. The type material genome assembly is deposited in GenBank under accession number VSIX00000000.

Modification of rheological and filtration characteristics of water-based mud for drilling oil and gas wells using green SiO2@ZnO@Xanthan nanocomposite.

In this study, a green, simple and economical approach was used to synthesise the SiO2@ZnO@Xanthan nanocomposite (NC) to modify the rheological and filtration characteristics of the water-based drilling mud. The green synthesised NCs were identified using scanning electron microscopy, energy dispersive X-ray spectroscopy, elemental mapping, X-ray diffraction and UV-Vis analytical techniques. Additionally, the effect of SiO2@ZnO@Xanthan NCs on the filtration and rheological properties of mud including apparent viscosity, plastic viscosity, yield point, gel strength, mud cake and fluid loss was investigated. The obtained results confirmed that the synthesised NCs effectively improved the rheological properties of drilling mud, and considerably decreased its fluid loss and filter cake by about 54 and 92.5%, respectively. The results highly recommend the SiO2@ZnO@Xanthan NC as an excellent additive to improve the rheological properties, and reduce the fluid loss and the filter cake of the drilling mud.