Coordination between water relations strategy and carbon investment in leaf and stem in six fruit tree species.

The water relation strategy is a key issue in climate change. Given the difficulty of determining water relations strategy, there is a need for simple traits with a solid theoretical basis to estimate it. Traits associated with resource allocation patterns along a 'fast-slow' plant economics spectrum are particularly compelling, reflecting trade-offs between growth rate and carbon allocation. Avocado (Persea americana ), fig tree (Ficus carica ), mandarin (Citrus reticulata ), olive (Olea europaea ), pomegranate (Punica granatum ), and grapevine (Vitis vinifera ) were characterised in terms of iso-anisohydric strategy through stomatal behaviour, water potential at the turgor loss point (TLP), and hydroscape area. Additionally, the association of these metrics with leaf mass per area (LMA) and wood density (WDen) was explored. We observed high coordination between LMA and WDen, and both traits were related to metrics of water relation strategy. More anisohydric species tended to invest more carbon per unit leaf area or unit stem volume, which has implications for hydraulic efficiency and water stress tolerance. WDen and TLP were the most powerful traits in estimating the water relation strategy for six fruit species. These traits are easy to measure, time-cost efficient, and appear central to coordinating multiple traits and behaviours along the water relations strategies.

Trunk distortion weakens the tree productivity revealed by half-sib progeny determination of Pinus yunnanensis.

Twisted trunks are not uncommon in trees, but their effects on tree growth are still unclear. Among coniferous tree species, the phenomenon of trunk distortion is more prominent in Pinus yunnanensis. To expand the germplasm of genetic resources, we selected families with excellent phenotypic traits to provide material for advanced generation breeding. The progeny test containing 93 superior families (3240 trees) was used as the research material. Phenotypic measurements and estimated genetic parameters (family heritability, realistic gain and genetic gain) were performed at 9, 15, and 18 years of age, respectively. The genetic evaluation yielded the following results (1) The intra-family variance component of plant height (PH) was greater than that of the inter-family, while the inter-family variance components of other traits (diameter at breast height (DBH), crown diameter (CD), height under branches (HUB), degree of stem-straightness (DS)) were greater than that of the intra-family, indicating that there was abundant variation among families and potential for selection. (2) At half rotation period (18 years old), there was a significant correlation among the traits. The proportion of trees with twisted trunks (level 1-3 straightness) reached 48%. The DS significantly affected growth traits, among which PH and DBH were the most affected. The volume loss rate caused by twisted trunk was 18.06-56.75%, implying that trunk distortion could not be completely eliminated after an artificial selection. (3) The influence of tree shape, crown width, and trunk on volume increased, and the early-late correlation between PH, DBH and volume was extremely significant. The range of phenotypic coefficient of variation, genetic variation coefficient and family heritability of growth traits (PH, DBH, and volume) were 44.29-127.13%, 22.88-60.87%, and 0.79-0.83, respectively. (4) A total of 21 superior families were selected by the method of membership function combined with independent selection. Compared with the mid-term selection (18 years old), the accuracy of early selection (9 years old) reached 77.5%. The selected families' genetic gain and realistic gain range were 5.79-19.82% and 7.12-24.27%, respectively. This study can provide some useful reference for the breeding of coniferous species.

Impact of extreme pre-monsoon drought on xylogenesis and intra-annual radial increments of two tree species in a tropical montane evergreen broad-leaved forest, southwest China.

Tropical montane evergreen broad-leaved forests cover the majority of forest areas and have high carbon storage in Xishuangbanna, southwest China. However, stem radial growth dynamics and their correlations with climate factors have never been analyzed in this forest type. By combining bi-weekly microcoring and high-resolution dendrometer measurements, we monitored xylogenesis and stem radius variations of the deciduous species Betula alnoides Buch.-Ham. ex D. Don and the evergreen species Schima wallichii (DC.) Korth. We analyzed the relationships between weekly climate variables prior to sampling and the enlarging zone width or wall-thickening zone width, as well as weekly radial increments and climate factors during two consecutive years (2020 to 2021) showing contrasting hydrothermal conditions in the pre-monsoon season. In the year 2020, which was characterized by a warmer and drier pre-monsoon season, the onset of xylogenesis and radial increments of B. alnoides and S. wallichii were delayed by three months and one month, respectively, compared with the year 2021. In 2020, xylem formation and radial increments were significantly reduced for B. alnoides, but not for S. wallichii. The thickness of enlarging zone and wall-thickening zone in S. wallichii were positively correlated with relative humidity, and minimum and mean air temperature, but were negatively correlated with vapor pressure deficit during 2020 to 2021. The radial increments of both species showed significant positive correlations with precipitation and relative humidity, and negative correlations with vapor pressure deficit and maximum air temperature during two years. Our findings reveal that drier pre-monsoon conditions strongly delay growth initiation and reduce stem radial growth, providing deep insights to understand tree growth and carbon sequestration potential in tropical forests under a predicted increase in frequent drought events.

Prolonged exposure to hypergravity increases number and size of cells and enhances lignin deposition in the stem of Arabidopsis thaliana.

We have performed a lab-based hypergravity cultivation experiment using a centrifuge equipped with a lighting system and examined long-term effects of hypergravity on the development of the main axis of the Arabidopsis (Arabidopsis thaliana (L.) Heynh.) primary inflorescence, which comprises the rachis and peduncle, collectively referred to as the main stem for simplicity. Plants grown under 1 × g (gravitational acceleration on Earth) conditions for 20-23 days and having the first visible flower bud were exposed to hypergravity at 8 × g for 10 days. We analyzed the effect of prolonged hypergravity conditions on growth, lignin deposition, and tissue anatomy of the main stem. As a result, the length of the main stem decreased and cross-sectional area, dry mass per unit length, cell number, and lignin content of the main stem significantly increased under hypergravity. Lignin content in the rosette leaves also increased when they were exposed to hypergravity during their development. Except for interfascicular fibers, cross-sectional areas of the tissues composing the internode significantly increased under hypergravity in most types of the tissues in the basal part than the apical part of the main stem, indicating that the effect of hypergravity is more pronounced in the basal part than the apical part. The number of cells in the fascicular cambium and xylem significantly increased under hypergravity both in the apical and basal internodes of the main stem, indicating a possibility that hypergravity stimulates procambium activity to produce xylem element more than phloem element. The main stem was suggested to be strengthened through changes in its morphological characteristics as well as lignin deposition under prolonged hypergravity conditions.

Tip-to-base conduit widening remains consistent across cambial age and climates in Fagus sylvatica L.

Water transport, mechanical support and storage are the vital functions provided by the xylem. These functions are carried out by different cells, exhibiting significant anatomical variation not only within species but also within individual trees. In this study, we used a comprehensive dataset to investigate the consistency of predicted hydraulic vessel diameter widening values in relation to the distance from the tree apex, represented by the relationship Dh ∝ Lß (where Dh is the hydraulic vessel diameter, L the distance from the stem apex and ß the scaling exponent). Our analysis involved 10 Fagus sylvatica L. trees sampled at two distinct sites in the Italian Apennines. Our results strongly emphasize that vessel diameter follows a predictable pattern with the distance from the stem apex and ß ~ 0.20 remains consistent across cambial age and climates. This finding supports the hypothesis that trees do not alter their axial configuration represented by scaling of vessel diameter to compensate for hydraulic limitations imposed by tree height during growth. The study further indicates that within-tree variability significantly contributes to the overall variance of the vessel diameter-stem length exponent. Understanding the factors that contribute to the intraindividual variability in the widening exponent is essential, particularly in relation to interspecific responses and adaptations to drought stress.

Species-specific responses drive browsing impacts on physiological and functional traits in Quercus agrifolia and Umbellularia californica.

Herbivory is a fundamental ecological force in the evolution of plant physiological, morphological, and chemical attributes. In this study, we explored how browsing pressure by local deer populations affected leaf form and function in two California native tree species, Quercus agrifolia (coast live oak) and Umbellularia californica (California bay laurel). Specifically, we investigated how leaf and stem vascular attributes differed between browsed and non-browsed zones of each species. Browsing significantly altered traits such as leaf to phloem ratios and leaf area, but we observed few meaningful differences in leaf and stem anatomy between browsed and non-browsed material. We discuss these results in the context of leaf and stem adaptations to herbivory and water use efficiency and explore future research considerations for investigating leaf and stem vascular trait development with herbivore presence.

YABBY and diverged KNOX1 genes shape nodes and internodes in the stem.

Plant stems comprise nodes and internodes that specialize in solute exchange and elongation. However, their boundaries are not well defined, and how these basic units arise remains elusive. In rice with clear nodes and internodes, we found that one subclade of class I knotted1-like homeobox (KNOX1) genes for shoot meristem indeterminacy restricts node differentiation and allows internode formation by repressing YABBY genes for leaf development and genes from another node-specific KNOX1 subclade. YABBYs promote nodal vascular differentiation and limit stem elongation. YABBY and node-specific KNOX1 genes specify the pulvinus, which further elaborates the nodal structure for gravitropism. Notably, this KNOX1 subclade organization is specific to seed plants. We propose that nodes and internodes are distinct domains specified by YABBY-KNOX1 cross-regulation that diverged in early seed plants.

Genome-wide association study of stem structural characteristics that extracted by a high-throughput phenotypic analysis "LabelmeP rice" in rice.

Stem is important for assimilating transport and plant strength; however, less is known about the genetic basis of its structural characteristics. In this study, a high-throughput method, "LabelmeP rice" was developed to generate 14 traits related to stem regions and vascular bundles, which allows the establishment of a stem cross-section phenotype dataset containing anatomical information of 1738 images from hand-cut transections of stems collected from 387 rice germplasm accessions grown over two successive seasons. Then, the phenotypic diversity of the rice accessions was evaluated. Genome-wide association studies identified 94, 83, and 66 significant single nucleotide polymorphisms (SNPs) for the assayed traits in 2 years and their best linear unbiased estimates, respectively. These SNPs can be integrated into 29 quantitative trait loci (QTL), and 11 of them were common in 2 years, while correlated traits shared 19. In addition, 173 candidate genes were identified, and six located at significant SNPs were repeatedly detected and annotated with a potential function in stem development. By using three introgression lines (chromosome segment substitution lines), four of the 29 QTLs were validated. LOC_Os01g70200, located on the QTL uq1.4, is detected for the area of small vascular bundles (SVB) and the rate of large vascular bundles number to SVB number. Besides, the CRISPR/Cas9 editing approach has elucidated the function of the candidate gene LOC_Os06g46340 in stem development. In conclusion, the results present a time- and cost-effective method that provides convenience for extracting rice stem anatomical traits and the candidate genes/QTL, which would help improve rice.

Climate of origin shapes variations in wood anatomical properties of 17 Picea species.

BACKGROUND: Variations in hydraulic conductivity may arise from species-specific differences in the anatomical structure and function of the xylem, reflecting a spectrum of plant strategies along a slow-fast resource economy continuum. Spruce (Picea spp.), a widely distributed and highly adaptable tree species, is crucial in preventing soil erosion and enabling climate regulation. However, a comprehensive understanding of the variability in anatomical traits of stems and their underlying drivers in the Picea genus is currently lacking especially in a common garden. RESULTS: We assessed 19 stem economic properties and hydraulic characteristics of 17 Picea species grown in a common garden in Tianshui, Gansu Province, China. Significant interspecific differences in growth and anatomical characteristics were observed among the species. Specifically, xylem hydraulic conductivity (Ks) and hydraulic diameter exhibited a significant negative correlation with the thickness to span ratio (TSR), cell wall ratio, and tracheid density and a significant positive correlation with fiber length, and size of the radial tracheid. PCA revealed that the first two axes accounted for 64.40% of the variance, with PC1 reflecting the trade-off between hydraulic efficiency and mechanical support and PC2 representing the trade-off between high embolism resistance and strong pit flexibility. Regression analysis and structural equation modelling further confirmed that tracheid size positively influenced Ks, whereas the traits DWT, D_r, and TSR have influenced Ks indirectly. All traits failed to show significant phylogenetic associations. Pearson's correlation analysis demonstrated strong correlations between most traits and longitude, with the notable influence of the mean temperature during the driest quarter, annual precipitation, precipitation during the wettest quarter, and aridity index. CONCLUSIONS: Our results showed that xylem anatomical traits demonstrated considerable variability across phylogenies, consistent with the pattern of parallel sympatric radiation evolution and global diversity in spruce. By integrating the anatomical structure of the stem xylem as well as environmental factors of origin and evolutionary relationships, our findings provide novel insights into the ecological adaptations of the Picea genus.

Parametrization of biological assumptions to simulate growth of tree branching architectures.

Modeling and simulating the growth of the branching of tree species remains a challenge. With existing approaches, we can reconstruct or rebuild the branching architectures of real tree species, but the simulation of the growth process remains unresolved. First, we present a tree growth model to generate branching architectures that resemble real tree species. Secondly, we use a quantitative morphometric approach to infer the shape similarity of the generated simulations and real tree species. Within a functional-structural plant model, we implement a set of biological parameters that affect the branching architecture of trees. By modifying the parameter values, we aim to generate basic shapes of spruce, pine, oak and poplar. Tree shapes are compared using geometric morphometrics of landmarks that capture crown and stem outline shapes. Five biological parameters, namely xylem flow, shedding rate, proprioception, gravitysense and lightsense, most influenced the generated tree branching patterns. Adjusting these five parameters resulted in the different tree shapes of spruce, pine, oak, and poplar. The largest effect was attributed to gravity, as phenotypic responses to this effect resulted in different growth directions of gymnosperm and angiosperm branching architectures. Since we were able to obtain branching architectures that resemble real tree species by adjusting only a few biological parameters, our model is extendable to other tree species. Furthermore, the model will also allow the simulation of structural tree-environment interactions. Our simplifying approach to shape comparison between tree species, landmark geometric morphometrics, showed that even the crown-trunk outlines capture species differences based on their contrasting branching architectures.

Adaptation mechanism of three Impatiens species to different habitats based on stem morphology, lignin and MYB4 gene.

BACKGROUND: Impatiens is an important genus with rich species of garden plants, and its distribution is extremely extensive, which is reflected in its diverse ecological environment. However, the specific mechanisms of Impatiens' adaptation to various environments and the mechanism related to lignin remain unclear. RESULTS: Three representative Impatiens species,Impatiens chlorosepala (wet, low degree of lignification), Impatiens uliginosa (aquatic, moderate degree of lignification) and Impatiens rubrostriata (terrestrial, high degree of lignification), were selected and analyzed for their anatomical structures, lignin content and composition, and lignin-related gene expression. There are significant differences in anatomical parameters among the stems of three Impatiens species, and the anatomical structure is consistent with the determination results of lignin content. Furthermore, the thickness of the xylem and cell walls, as well as the ratio of cell wall thickness to stem diameter have a strong correlation with lignin content. The anatomical structure and degree of lignification in Impatiens can be attributed to the plant's growth environment, morphology, and growth rate. Our analysis of lignin-related genes revealed a negative correlation between the MYB4 gene and lignin content. The MYB4 gene may control the lignin synthesis in Impatiens by controlling the structural genes involved in the lignin synthesis pathway, such as HCT, C3H, and COMT. Nonetheless, the regulation pathway differs between species of Impatiens. CONCLUSIONS: This study demonstrated consistency between the stem anatomy of Impatiens and the results obtained from lignin content and composition analyses. It is speculated that MYB4 negatively regulates the lignin synthesis in the stems of three Impatiens species by regulating the expression of structural genes, and its regulation mechanism appears to vary across different Impatiens species. This study analyses the variations among different Impatiens plants in diverse habitats, and can guide further molecular investigations of lignin biosynthesis in Impatiens.

A dataset of 40'000 trees with section-wise measured stem diameter and branch volume from across Switzerland.

Estimating growing stock is one of the main objectives of forest inventories. It refers to the stem volume of individual trees which is typically derived by models as it cannot be easily measured directly. These models are thus based on measurable tree dimensions and their parameterization depends on the available empirical data. Historically, such data were collected by measurements of tree stem sizes, which is very time- and cost-intensive. Here, we present an exceptionally large dataset with section-wise stem measurements on 40'349 felled individual trees collected on plots of the Experimental Forest Management project. It is a revised and expanded version of previously unpublished data and contains the empirically derived coarse (diameter ≥7 cm) and fine branch volume of 27'297 and 18'980, respectively, individual trees. The data were collected between 1888 and 1974 across Switzerland covering a large topographic gradient and a diverse species range and can thus support estimations and verification of volume functions also outside Switzerland including the derivation of whole tree volume in a consistent manner.

The response of physiological and xylem anatomical traits under cadmium stress in Pinus thunbergii seedlings.

Studying the response of physiological and xylem anatomical traits under cadmium stress is helpful to understand plants' response to heavy metal stress. Here, seedlings of Pinus thunbergii Parl. were treated with 50, 100 and 150 mg kg-1 Cd2+ for 28 days. Cadmium and nonstructural carbohydrate content of leaves, stems and roots, root Cd2+ flux, cadmium distribution pattern in stem xylem and phloem, stem xylem hydraulic traits, cell wall component fractions of stems and roots, phytohormonal content such as abscisic acid, gibberellic acid 3, molecule -indole-3-acetic acid, and jasmonic acid from both leaves and roots, as well as xylem anatomical traits from both stems and roots were measured. Root Cd2+ flux increased from 50 to 100 mmol L-1 Cd2+ stress, however it decreased at 150 mmol L-1 Cd2+. Cellulose and hemicellulose in leaves, stems and roots did not change significantly under cadmium stress, while pectin decreased significantly. The nonstructural carbohydrate content of both leaves and stems showed significant changes under cadmium stress while the root nonstructural carbohydrate content was not affected. In both leaves and roots, the abscisic acid content significantly increased under cadmium stress, while the gibberellic acid 3, indole-3-acetic acid and jasmonic acid methylester content significantly decreased. Both xylem specific hydraulic conductivity and xylem water potential decreased with cadmium stress, however tracheid diameter and double wall thickness of the stems and roots were not affected. High cadmium intensity was found in both the stem xylem and phloem in all cadmium stressed treatments. Our study highlighted the in situ observation of cadmium distribution in both the xylem and phloem, and demonstrated the instant response of physiological traits such as xylem water potential, xylem specific hydraulic conductivity, root Cd2+ flux, nonstructural carbohydrate content, as well as phytohormonal content under cadmium stress, and the less affected traits such as xylem anatomical traits, cellulose and hemicellulose.

Anatomical features of ecological importance and taxonomic value revealed by scanning electron microscopy and light microscopy in Camonea umbellata (L.) A.R. Simões & Staples (Convolvulaceae).

This article describes detailed and novel data on the anatomy and histochemistry of leaves, stems, and roots of Camonea umbellata (L.) A.R.Simões & Staples in different environments for the identification of characters with taxonomical value and of ecological importance, with provision of light and scanning electron microscopy images. To analyze the characters, we collected samples of the vegetative organs of three individuals in each of three populations, which were in a grazing area, an urban environment, and a biological reserve. The main diagnostic anatomical markers for the identification of C. umbellata include amphistomatic leaves, tetracytic and brachyparatetracytic stomata, peltate trichomes, long simple trichomes, epidermis with striated cuticle ornamentation, mesophyll with acute borders, presence of druses, secretory channels, angular collenchyma, fibrous pericycle in the stem, intraxylary phloem in the vegetative organs, oil bodies throughout the midrib, petiole, stem and root, and epicuticular waxes of the crust and coiled rodlet types. Since the characters above did not show variation in the environments evaluated, we consider these characters taxonomically useful for the identification of C. umbellata. RESEARCH HIGHLIGHTS: The anatomy of the aerial vegetative organs of Camonnea umbellata retains common Convolvulaceae characters. The sinuosity of the epidermal cell walls and the density of trichomes in the epidermis of the petiole were visually variable characters among the analyzed individuals. Amphistomatic leaves, tetracytic and brachyparatetracytic stomata, peltate trichomes, epidermis with striated cuticle ornamentation, dorsiventral mesophyll with border acute, presence of druses, secretory structures, angular collenchyma, fibrous pericycle in the stem, intraxillary phloem, presence of oil bodies in all organs, and epicuticular waxes of the crust type and coiled rods were considered important anatomical markers for the recognition and correct identification of Camonea umbellata.

Contributions of lignification, tissue arrangement patterns, and cross-sectional area to whole-stem mechanical properties in Arabidopsis thaliana.

Plant cells withstand mechanical stress originating from turgor pressure by robustly maintaining the mechanical properties of the cell wall. This applies at the organ scale as well; many plant stems act as pressurized cylinders, where the epidermis is under tension and inner tissues are under compression. The clavata3 de-etiolated3 (clv3-8 det3-1) double mutant of Arabidopsis thaliana displays cracks in its stems because of a conflict between the mechanical properties of the weak epidermis and over-proliferation of inner stem tissues. In this work, we conducted three-point bending tests on various Arabidopsis thaliana mutants, including those displaying the stem cracking phenotype, to examine the differences in their mechanical properties. The clv3-8 det3-1 double mutant exhibited reduced stem stiffness, consistent with reduced differentiation due to the clv3-8 mutation. Yet, in clv3-8, stem cross-sectional area was increased associating with the increase in vascular bundle number, and stem cross-sections displayed various shapes. To uncouple the contribution of geometry and cell-wall differentiation to the mechanical properties of the whole stems, we tested the contribution of lignified fibers to stem stiffness. In order to suppress lignin deposition in stems genetically, we generated multiple higher-order mutants by crossing clv3-8 and/or det3-1 with nst1-1 nst3-1, in which lignin deposition is suppressed. Stem stiffness was reduced markedly in all nst1-1 nst3-1 mutant backgrounds. Overall, our results suggest that stem stiffness relies on the presence of differentiated, lignified, fiber tissue as well as on the alignment or spatial distribution of vascular bundles within the stem organ.

Adaptive strategies based on shrub leaf-stem anatomy and their environmental interpretations in the eastern Qaidam Basin.

BACKGROUND: Water stress seriously affects the survival of plants in natural ecosystems. Plant resistance to water stress relies on adaptive strategies, which are mainly based on plant anatomy with following relevant functions: (1) increase in water uptake and storage; (2) reduction of water loss; and (3) mechanical reinforcement of tissues. We measured 15 leaf-stem anatomical traits of five dominant shrub species from 12 community plots in the eastern Qaidam Basin to explore adaptive strategies based on plant leaf-stem anatomy at species and community levels. and their relationship with environmental stresses were tested. RESULTS: Results showed that the combination of leaf-stem anatomical traits formed three types of adaptive strategies with the drought tolerance of leaf and stem taken as two coordinate axes. Three types of water stress were caused by environmental factors in the eastern Qaidam Basin, and the established adaptive strategy triangle could be well explained by these environmental stresses. The interpretation of the strategic triangle was as follows: (1) exploitative plant strategy, in which leaf and stem adopt the hydraulic efficiency strategy and safety strategy, respectively. This strategy is mostly applied to plants in sandy desert (i.e., Nitraria tangutorum, and Artemisia sphaerocephala) which is mainly influenced by drought stress; (2) stable plant strategy, in which both leaf/assimilation branches and stem adopt hydraulic safety strategy. This strategy is mostly applied to plants in salty desert (i.e., Kalidium foliatum and Haloxylon ammodendron) which aridity has little effect on them; and (3) opportunistic plant strategy, in which leaf and stem adopt hydraulic safety strategy and water transport efficiency strategy. This strategy is mostly applied to plants in multiple habitats (i.e., Sympegma regelii) which is mainly affected by coldness stress. CONCLUSION: The proposed adaptive strategy system could provide a basis for elucidating the ecological adaptation mechanism of desert woody plants and the scientific management of natural vegetation in the Qinghai-Tibet Plateau.

Morphoanatomical study of the species Zanthoxylum kleinii (R.S. Cowan) P.G. Waterman (Rutaceae).

The order Sapindales is comprised of nine families and in Brazil it is represented by six, including Rutaceae Juss., which constitutes the largest group of this order. A variety of species of Zanthoxylum L. are distributed throughout the country, and among them is the species Zanthoxylum kleinii (R.S. Cowan) P.G. Waterman, which is found in the states of Brazil. This study aimed to characterize the morphoanatomy of the leaf, petiole, rachis, and stem of the species Z. kleinii. Histochemical tests were performed, and the sections were visualized under optical and scanning electron microscopy. The analysis showed that the morphoanatomical characteristics of the species are: hypoestomatic leaflets; stomata classified as anomocytic, tetracytic, and anisocytic; dorsiventral mesophyll; cavities that produce a secretion of lipid nature, present in the leaflet, rachis, and petiole; colleters distributed in the leaf; presence of simple non-glandular trichomes in all structures; and prismatic crystals in the petiole. Histochemical tests indicated the presence of phenolic and lipophilic compounds, mucilage, and lignin. With the result of this research, it was possible to identify the nature of the compounds secreted by the secretory structures of the leaves; in addition, the morphoanatomical characterization of Z. kleinii can provide relevant data for future studies for other organs of the species not yet described. Furthermore, contributing concomitantly with data for the genus, in this way, supporting to differentiate them. RESEARCH HIGHLIGHTS: Ultrastructural features observed by microscopic techniques. Calcium oxalate crystals present in the rachis. Microchemical tests confirmed the presence of colleters in the leaflet.

Phenotyping xylem connections in grafted plants using X-ray micro-computed tomography.

Plants are able to naturally graft or inosculate their trunks, branches and roots together, this mechanism is used by humans to graft together different genotypes for a range of purposes. Grafts are considered successful if functional vascular connections between the two genotypes occur. Various techniques can evaluate xylem connections across the graft interface. However, these methods are generally unable to assess the heterogeneity and three-dimensional (3D) structure of xylem vessel connections. Here we present the use of X-ray micro-computed tomography to characterize the 3D morphology of grafts of grapevine. We show that xylem vessels form between the two plants of natural root and human-made stem grafts. The main novelty of this methodology is that we were able to visualize the 3D network of functional xylem vessels connecting the scion and rootstock in human-made stem grafts thanks to the addition of a contrast agent to the roots and improved image analysis pipelines. In addition, we reveal the presence of extensive diagonal xylem connections between the main axial xylem vessels in 2-year old grapevine stems. In conclusion, we present a method that has the potential to provide new insights into the structure and function of xylem vessels in large tissue samples.

Isohydric stomatal behaviour alters fruit vascular flows and minimizes fruit size reductions in drought-stressed 'Hass' avocado (Persea americana Mill.).

BACKGROUND AND AIMS: Plant water status is important for fruit development, because many fleshy fruits contain large amounts of water. However, there is no information on vascular flows of Persea americana 'Hass' avocado. The aims of this research were to explore the impact of drought stress on the water relationships of the 'Hass' avocado plant and its fruit growth. METHODS: Well-watered and water-stressed 'Hass' avocado plants were compared. Over 4 weeks, water flows through the shoot and fruit pedicel were monitored using external sap flow gauges. Fruit diameter was monitored using linear transducers, and stomatal conductance (gs), photosynthesis (A) and leaf and stem water potentials (Ñ°leaf and Ñ°stem) were measured to assess the response of the plants to water supply. KEY RESULTS: In well-watered conditions, the average water inflow to the shoot was 72 g day-1. Fruit water inflow was 2.72 g day-1, but there was water loss of 0.37 g day-1 caused by the outflow (loss back into the tree) through the vascular tissues and 1.06 g day-1 from the fruit skin. Overall, fruit volume increased by 1.4 cm3 day-1. In contrast, water flow into fruit of water-stressed plants decreased to 1.88 g day-1, with the outflow increasing to 0.61 g day-1. As a result, increases in fruit volume were reduced to 0.4 cm3 day-1. The values of A, gs and sap flow to shoots were also reduced during drought conditions. Changes in the hourly time-courses of pedicel sap flow, fruit volume and stem water potential during drought suggest that the stomatal response prevented larger increases in outflow from the fruit. Following re-watering, a substantial recovery in growth rate was observed. CONCLUSIONS: In summary, a reduction in growth of avocado fruit was observed with induced water deficit, but the isohydric stomatal behaviour of the leaves helped to minimize negative changes in water balance. Also, there was substantial recovery after re-watering, hence the short-term water stress did not decrease avocado fruit size. Negative impacts might appear if the drought treatment were prolonged.

Determining the internal orientation, degree of ordering, and volume of elongated nanocavities by NMR: Application to studies of plant stem.

This study investigates the fibril nanostructure of fresh celery samples by modeling the anisotropic behavior of the transverse relaxation time (T2) in nuclear magnetic resonance (NMR). Experimental results are interpreted within the framework of a previously developed theory, which was successfully used to model the nanostructures of several biological tissues as a set of water filled nanocavities, hence explaining the anisotropy the T2 relaxation time in vivo. An important feature of this theory is to determine the degree of orientational ordering of the nanocavities, their characteristic volume, and their average direction with respect to the macroscopic sample. Results exhibit good agreement between theory and experimental data, which are, moreover, supported by optical microscopic resolution. The quantitative NMR approach presented herein can be potentially used to determine the internal ordering of biological tissues noninvasively.