Alkali-activated geopolymers based on calcined phosphate sludges and metakaolin.

The extraction of phosphorite ore in Tunisia has resulted in the discharge of substantial amounts of phosphatic sludge into the region's water system. To mitigate this environmental issue and prevent heavy metal leaching, a geopolymerization process was employed using two types of Tunisian calcined phosphate sludges (Cal-PS1 and Cal-PS2) as substitutes for alkali-activated metakaolin. This study aimed to investigate and compare the physical and mechanical properties of the resulting geopolymers. The optimal substitution ratio of metakaolin with calcined phosphate sludge was determined to be 1.5, equivalent to 20 wt.% of calcined phosphate sludge. Compressive strength tests conducted after 28 days of curing revealed values of 37 MPa for Cal-PS1 specimens and 28 MPa for Cal-PS2 geopolymers while compressive strength of geopolymers soaked in water for 28 days showed a decrease with the addition of phosphate sludges. The specific surface areas of Cal-PS1 geopolymers ranged from 16.3 to 16.9 m2/g and from 17.62 to 18.73 m2/g for Cal-PS2 specimens exhibiting a mesoporous structure. The elasticity modulus of the geopolymers was found to increase with the increase of the apparent density of geopolymers and with the sludges content but it tended to be lower than the Portland cement elasticity modulus. Leaching test was conducted to evaluate the potential environmental applications of the geopolymers. This test demonstrated effective containment of heavy metals within the geopolymers' network, except for low levels of arsenic.

Removal of artificial sweeteners in wastewater treatment plants and their degradation during sewage sludge composting with micro- and nano-sized kaolin.

This study surveyed the fates of artificial sweeteners in influent, effluent, and sewage sludge (SS) in wastewater treatment plant, and investigated the effects of Micro-Kaolin (Micro-KL) and Nano-Kaolin (Nano-KL) on nitrogen transformation and sucralose (SUC) and acesulfame (ACE) degradation during SS composting. Results showed the cumulative rate of ACE and SUC in SS was ∼76 %. During SS composting, kaolin reduced NH3 emissions by 30.2-45.38 %, and N2O emissions by 38.4-38.9 %, while the Micro-KL and Nano-KL reduced nitrogen losses by 14.8 % and 12.5 %, respectively. Meanwhile, Micro-KL and Nano-KL increased ACE degradation by 76.8 % and 84.2 %, and SUC degradation by 75.3 % and 77.7 %, and significantly shifted microbial community structure. Furthermore, kaolin caused a positive association between Actinobacteria and sweetener degradation. Taken together, kaolin effectively inhibited nitrogen loss and promoted the degradation of ACE and SUC during the SS composting, which is of great significance for the removal of emerging organic pollutants in SS.

A synthetic and transparent clay removes Microcystis aeruginosa efficiently.

Clay-algae flocculation is a promising method to remove harmful algal blooms (HABs) in aquatic ecosystems. Many HAB-generating species, such as Microcystis aeruginosa (M. aeruginosa), a common species in lakes, produce toxins and harm the environment, human health, and the economy. Natural clays, such as bentonite and kaolinite, and modification of these clays have been applied to mitigate HABs by forming large aggregates and settling down. In this study, we aim to examine the impact of laponite, a commercially available smectite clay that is synthetic, transparent, compatible with human tissues, and degradable, on removing HABs. We compare the cell removal efficiencies (RE) of laponite, two natural clays, and their polyaluminum chloride (PAC)-modified versions through clay-algae flocculation experiments. Our results show that the optimum concentrations of laponite, bentonite, kaolinite, PAC-modified bentonite, and PAC-modified kaolinite to remove 80 % of the M. aeruginosa cells from the water column are 0.05 g/L, 2 g/L, 4 g/L, 2 g/L and 0.3 g/L respectively. Therefore, to achieve the same cell removal efficiency, the amount of laponite needed is 40 to 80 times less than bentonite and kaolinite, and 6 times less than PAC-modified kaolinite. We demonstrate that the superior performance of laponite clay is because of its smaller particle size, which increases the encounter rate between cells and clay particles. Furthermore, experiments using water samples from Powderhorn Lake confirmed laponite's effectiveness in mitigating HABs. Our price analysis also suggests that this commercially-available clay, laponite, can be used in the field at a relatively low cost.

Heteroaggregation and deposition behaviors of carboxylated nanoplastics with different types of clay minerals in aquatic environments: Important role of calcium(II) ion-assisted bridging.

The widespread utilization of plastic products ineluctably leads to the ubiquity of nanoplastics (NPs), causing potential risks for aquatic environments. Interactions of NPs with mineral surfaces may affect NPs transport, fate and ecotoxicity. This study aims to investigate systematically the deposition and aggregation behaviors of carboxylated polystyrene nanoplastics (COOH-PSNPs) by four types of clay minerals (illite, kaolinite, Na-montmorillonite, and Ca-montmorillonite) under various solution chemistry conditions (pH, temperature, ionic strength and type). Results demonstrate that the deposition process was dominated by electrostatic interactions. Divalent cations (i.e., Ca2+, Mg2+, Cd2+, or Pb2+) were more efficient for screening surface negative charges and compressing the electrical double layer (EDL). Hence, there were significant increases in deposition rates of COOH-PSNPs with clay minerals in suspension containing divalent cations, whereas only slight increases in deposition rates of COOH-PSNPs were observed in monovalent cations (Na+, K+). Negligible deposition occurred in the presence of anions (F-, Cl-, NO3-, CO32-, SO42-, or PO43-). Divalent Ca2+ could incrementally facilitate the deposition of COOH-PSNPs through Ca2+-assisted bridging with increasing CaCl2 concentrations (0-100 mM). The weakened deposition of COOH-PSNPs with increasing pH (2.0-10.0) was primarily attributed to the reduce in positive charge density at the edges of clay minerals. In suspensions containing 2 mM CaCl2, increased Na+ ionic strength (0-100 mM) and temperature (15-55 ◦C) also favored the deposition of COOH-PSNPs. The ability of COOH-PSNPs deposited by four types of clay minerals followed the sequence of kaolinite > Na-montmorillonite > Ca-montmorillonite > illite, which was related to their structural and surface charge properties. This study revealed the deposition behaviors and mechanisms between NPs and clay minerals under environmentally representative conditions, which provided novel insights into the transport and fate of NPs in natural aquatic environments.

Enhanced Arsenate Immobilization by Kaolinite via Heterogeneous Pathways during Ferrous Iron Oxidation.

Clay minerals are ubiquitous in subsurface environments and have long been recognized as having a limited or negligible impact on the fate of arsenic (As) due to their negatively charged surfaces. Here, we demonstrate the significant role of kaolinite (Kln), a pervasive clay mineral, in enhancing As(V) immobilization during ferrous iron (Fe(II)) oxidation at near-neutral pH. Our results showed that Fe(II) oxidation alone was not capable of immobilizing As(V) at relatively low Fe/As molar ratios (≤2) due to the generation of Fe(III)-As(V) nanocolloids that could still migrate easily as truly dissolved As did. In the presence of kaolinite, dissolved As(V) was significantly immobilized on the kaolinite surfaces via forming Kln-Fe(III)-As(V) ternary precipitates, which had large sizes (at micrometer levels) to reduce the As mobility. The kaolinite-induced heterogeneous pathways for As(V) immobilization involved Fe(II) adsorption, heterogeneous oxidation of adsorbed Fe(II), and finally heterogeneous nucleation/precipitation of Fe(III)-As(V) phases on the edge surfaces of kaolinite. The surface precipitates were mixtures of amorphous basic Fe(III)-arsenate and As-rich hydrous ferric oxide. Our findings provide new insights into the role of clay minerals in As transformation, which is significant for the fate of As in natural and engineered systems.

Development of Polyphosphate/Nanokaolin-Modified Alginate Sponge by Gas-Foaming and Plasma Glow Discharge Methods for Ultrarapid Hemostasis in Noncompressible Bleeding.

Effective bleeding management strategies in uncontrollable and noncompressible massive hemorrhage are becoming important in both clinical and combat situations. Here, a novel approach was developed to create a superporous and highly absorbable hemostatic sponge through a facile chemical gas-foaming method by cross-linking long-chain polyphosphate along with nanokaolin and Ca2+ in an alginate structure to synergistically activate the coagulation pathway. Natural kaolin obtained from the Marand mine in East Azarbaijan was converted into pseudohexagonal-shaped kaolin nanoparticles (30 to 150 nm) using ball milling followed by a newly developed glow discharge plasma treatment method. The obtained ultralight sponges (>90% porosity) exhibit ultrarapid water/blood absorption capacity (∼4000%) and excellent shape memory, which effectively concentrates coagulation factors. The results of in vitro tests demonstrated that the proposed sponges exhibited enhanced blood clotting ability (BCI < 10%) and superior cohesion with red blood cells (∼100) and platelets (∼80%) compared to commercially available hemostatic products. The in vivo host response results exhibited biosafety with no systemic and significant local inflammatory response by hematological, pathological, and biochemical parameter assessments. In a rat femoral artery complete excision model, the application of alginate/k/polyp nanocomposite sponges resulted in a complete hemostasis time of 60 s by significant reduction of hemostasis time (∼6.7-8.3 fold) and blood loss (∼2-2.8-fold) compared to commercially available hemostatic agents (P < 0.001). In conclusion, distinct physical characteristics accompanied by unique chemical composition multifunctional sponges activate hemostasis synergistically by triggering the XII, XI, X, IX, V, and II factors and the contact pathway and have the ability of rapid hemostasis in noncompressible severe bleeding.

Kaolinite-mediated synthesis of ultra-small silver nanoparticles with high antimicrobial activity.

Ultra-small Ag nanoparticles (<5 nm) loaded on a kaolinite surface were successfully prepared in large batches by a dry-process, displaying excellent broad-spectrum antimicrobial ability and size-dependent activity. This Ag-loaded kaolinite (Ag@AT/K) inhibited the growth of pathogenic bacteria and accelerated wound healing in in vivo experiments on MRSA-infected wounds. This work provides a new strategy for the preparation of mineral-based nanoscale antibacterial materials.

Rapid in situ formation of κ-carrageenan-carboxymethyl chitosan-kaolin clay hydrogel films enriched with arbutin for enhanced preservation of cherry tomatoes.

Food waste resulting from perishable fruits and vegetables, coupled with the utilization of non-renewable petroleum-based packaging materials, presents pressing challenges demanding resolution. This study addresses these critical issues through the innovative development of a biodegradable functional plastic wrap. Specifically, the proposed solution involves the creation of a κ-carrageenan/carboxymethyl chitosan/arbutin/kaolin clay composite film. This film, capable of rapid in-situ formation on the surfaces of perishable fruits, adeptly conforms to their distinct shapes. The incorporation of kaolin clay in the composite film plays a pivotal role in mitigating water vapor and oxygen permeability, concurrently bolstering water resistance. Accordingly, tensile strength of the composite film experiences a remarkable enhancement, escalating from 20.60 MPa to 34.71 MPa with the incorporation of kaolin clay. The composite film proves its efficacy by preserving cherry tomatoes for an extended period of 9 days at 28 °C through the deliberate delay of fruit ripening, respiration, dehydration and microbial invasion. Crucially, the economic viability of the raw materials utilized in the film, coupled with the expeditious and straightforward preparation method, underscores the practicality of this innovative approach. This study thus introduces an easy and sustainable method for preserving perishable fruits, offering a cost-effective and efficient alternative to petroleum-based packaging materials.

Catalytic flash pyrolysis for recovery of gasoline-range hydrocarbons from electric cable residue using a low-cost natural catalyst: An analytical Py-GC/MS study.

This investigation's novelty and objective reside in exploring catalytic flash pyrolysis of cross-linked polyethylene (XLPE) plastic residue in the presence of kaolin, with the perspective of achieving sustainable production of gasoline-range hydrocarbons. Through proximate analysis, thermogravimetric analysis, and heating value determination, this study also assessed the energy-related characteristics of cross-linked polyethylene plastic residue, revealing its potential as an energy source (44.58 MJ kg-1) and suitable raw material for pyrolysis due to its low ash content and high volatile matter content. To understand the performance as a low-cost catalyst in the flash pyrolysis of cross-linked polyethylene plastic residue, natural kaolin was subjected to characterization through thermogravimetric analysis, X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray fluorescence (XRF). Cross-linked polyethylene plastic residue was subjected to thermal and catalytic pyrolysis in an analytical microreactor coupled to gas chromatography-mass spectrometry (Py-GC/MS system), operating at 500 °C, to characterize the distribution and composition of volatile reaction products. The application of kaolin as a catalyst resulted in a decline of the relative concentration of hydrocarbons in the diesel range (C8-C24) from approximately 87 % to 28 %, and a reduction in lubricating oils (C14-C50) from about 70 % to 13 %, while concomitantly increasing the relative concentration of lighter hydrocarbons in the gasoline range (C8-C12) from around 28 % to 87 %. Therefore, catalytic flash pyrolysis offers the potential for converting this plastic waste into a new and abundant chemical source of gasoline-range hydrocarbons. This process can be deemed viable and sustainable for managing and valorizing cross-linked polyethylene plastic residue.

Cellulose fibres enhance the function of hemostatic composite medical sealants.

Tissue adhesives and sealants offer promising alternatives to traditional wound closure methods, but the existing trade-off between biocompatibility and strength is still a challenge. The current study explores the potential of a gelatin-alginate-based hydrogel, cross-linked with a carbodiimide, and loaded with two functional fillers, the hemostatic agent kaolin and cellulose fibres, to improve the hydrogel's mechanical strength and hemostatic properties for use as a sealant. The effect of the formulation parameters on the mechanical and physical properties was studied, as well as the biocompatibility and microstructure. The incorporation of the two functional fillers resulted in a dual micro-composite structure, with uniform dispersion of both fillers within the hydrogel, and excellent adhesion between the fillers and the hydrogel matrix. This enabled to strongly increase the sealing ability and the tensile strength and modulus of the hydrogel. The fibres' contribution to the enhanced mechanical properties is more dominant than that of kaolin. A combined synergistic effect of both fillers resulted in enhanced sealing ability (247%), tensile strength (400%), and Young's modulus (437%), compared to the unloaded hydrogel formulation. While the incorporation of kaolin almost did not affect the physical properties of the hydrogel, the incorporation of the fibres strongly increased the viscosity and decreased the gelation time and swelling degree. The cytotoxicity tests indicated that all studied formulations exhibited high cell viability. Hence, the studied new dual micro-composite hydrogels may be suitable for medical sealing applications, especially when it is needed to get a high sealing effect within a short time. The desired hemostatic effect is obtained due to kaolin incorporation without affecting the physical properties of the sealant. Understanding the effects of the formulation parameters on the hydrogel's properties enables the fitting of optimal formulations for various medical sealing applications.

Gold nanoparticles decorated kaolinite mineral modified screen-printed electrode: Use for simple, sensitive determination of gallic acid in food samples.

The current study offers the nanomolar quantification of gallic acid (GAL) based on gold nanoparticles (AuNps) and kaolinite minerals (KNT) modified on a screen-printed electrode (SPE). The electrochemical behavior of GAL was performed using differential pulse voltammetry (DPV) in Britton Robinson (BR) buffer solution at pH 2.0 as a supporting electrolyte. Under the optimized DPV mode parameters, the oxidation peak current of GAL (at 0.72 V vs Ag/AgCl) increased linearly in the range between 0.002 µmolL-1 and 40.0 µmolL-1 with a detection limit of 0.50 nmolL-1. The effect of common interfering agents was also investigated. Finally, the applicability of the proposed method was verified by quantification analysis of GAL in black tea and pomegranate juice samples.

Two-stage injection of polymer and microsand during ballasted flocculation for treating kaolin waters with or without humic acid: Floc evolutional characteristics, performance and mechanisms.

Ballasted flocculation is regarded as a most promising water treatment technology in aspects of retrofit and high-rate applications. To deep understand the incorporation behaviors of ballasting agent into ballasted floc growth, two distinct injection modes (namely a two-stage injection of polyacrylamide (PAM) alone, and a two-stage injection of both PAM and microsand) were developed in this study. Then, ballasted flocculation tests of kaolin and kaolin-HA (humic acid) waters were conducted at varying split ratios for fixed total dosages of both PAM and microsand. The experimental results showed that for either two-stage injection mode, the higher the second percentage of each split ratio, the greater the average size of maturated flocs at the second sub-stage of maturation. Meanwhile, the turbidity and UV254 values of settled water became lower at 30 and 180 s of sedimentation, suggesting that varying split ratios significantly affected the kinetics of ballasted floc growth. Moreover, it was suggested that the selection of either two-stage injection mode or corresponding split ratios played a more pronounced role in the HA removal than the total dosage of PAM. This suggestion was supported by SEM, FTIR and XPS analyses for surface morphological details, functional groups and chemical states of maturated flocs eventually formed in the kaolin-HA water through both two-stage injection modes. Accordingly, newly-established conceptual models of ballasted floc growth were proposed to explore the potential influencing mechanisms of varying split ratios on the ballasted flocculation performance. At each sub-stage of maturation, an appropriate dosage ratio between PAM and microsand was of great importance to effectively incorporate microsand particles into ballasted floc formation, besides the hydrolyzed produces of AS coagulant formed at the coagulation stage of ballasted flocculation. This study is expected to provide valuable insights for making ballasted flocculation more effective, economical and sustainable in water treatment engineering.

Effect of voltage gradients on EK-PRB remediation: Experimental and molecular dynamics simulations.

Electrokinetic-Permeable Reaction Barrier (EK-PRB) coupled remediation technology can effectively treat heavy metal-contaminated soil near coal mines. This study was conducted on cadmium (Cd), a widely present element in the soil of the mining area. To investigate the impact of the voltage gradient on the remediation effect of EK-PRB, the changes in current, power consumption, pH, and Cd concentration content during the macroscopic experiment were analyzed. A three-dimensional visualized kaolinite-heavy metal-water simulation system was constructed and combined with the Molecular Dynamics (MD) simulations to elucidate the migration mechanism and binding active sites of Cd on the kaolinite (001) crystalline surface at the microscopic scale. The results showed that the voltage gradient positively correlates with the current, power consumption, and Cd concentration during EK-PRB remediation, and the average removal efficiency increases non-linearly with increasing voltage gradient. Considering power consumption, average removal efficiency, and cost-effectiveness, the voltage range is between 1.5 and 3.0 V/cm, with 2.5 V/cm being the optimal value. The results of MD simulations and experiments correspond to each other. Cd2+ formed a highly stable adsorption structure in contrast to the Al-O sheet on the kaolinite (001) crystalline surface. The mean square displacement (MSD) curve of Cd2+ under the electric field exhibits anisotropy, the total diffusion coefficient DTotal increases and the Cd2+ migration rate accelerates. The electric field influences the microstructure of Cd2+ complexes. With the enhancement of the voltage gradient, the complexation between Cd2+ and water molecules is enhanced, and the interaction between Cd2+ and Cl- in solution is weakened.

Nanosilver-based materials as feed additives: Evaluation of their transformations along in vitro gastrointestinal digestion in pigs and chickens by using an ICP-MS based analytical platform.

The use of a new nanomaterial in the feed chain requires a risk assessment that involves in vitro gastrointestinal digestions to predict its degradation and oral exposure to nanoparticles. In this study, a nanosilver-based material was incorporated into pig and chicken feed as a growth-promoting additive and subjected to the corresponding in vitro gastrointestinal digestions. An inductively coupled plasma mass spectroscopy (ICP-MS) analytical platform was used to obtain information about the silver released in the different digestion phases. It included conventional ICP-MS for total silver determination, but also single particle ICP-MS and coupling to hydrodynamic chromatography for detection of dissolved and particulate silver. The bioaccessible fraction in the intestinal phase accounted for 8-13% of the total silver, mainly in the form of dissolved Ag(I) species, with less than 0.1% as silver-containing particles. Despite the additive behaving differently in pig and chicken digestions, the feed matrix played a relevant role in the fate of the silver.

Geopolymer-Based Materials for the Removal of Ibuprofen: A Preliminary Study.

Every year, new compounds contained in consumer products, such as detergents, paints, products for personal hygiene, and drugs for human and veterinary use, are identified in wastewater and are added to the list of molecules that need monitoring. These compounds are indicated with the term emerging contaminants (or Contaminants of Emerging Concern, CECs) since they are potentially dangerous for the environment and human health. To date, among the most widely used methodologies for the removal of CECs from the aquatic environment, adsorption processes play a role of primary importance, as they have proven to be characterized by high removal efficiency, low operating and management costs, and an absence of undesirable by-products. In this paper, the adsorption of ibuprofen (IBU), a nonsteroidal anti-inflammatory drug widely used for treating inflammation or pain, was performed for the first time using two different types of geopolymer-based materials, i.e., a metakaolin-based (GMK) and an organic-inorganic hybrid (GMK-S) geopolymer. The proposed adsorbing matrices are characterized by a low environmental footprint and have been easily obtained as powders or as highly porous filters by direct foaming operated directly into the adsorption column. Preliminary results demonstrated that these materials can be effectively used for the removal of ibuprofen from contaminated water (showing a concentration decrease of IBU up to about 29% in batch, while an IBU removal percentage of about 90% has been reached in continuous), thus suggesting their potential practical application.

Influence of suspended particles and dissolved organic matters on virus enrichment in reclaimed water by two-step tangential flow ultrafiltration: Phenomena and mechanisms.

Enteric virus concentration in large-volume water samples is crucial for detection and essential for assessing water safety. Certain dissolution and suspension components can affect the enrichment process. In this study, tangential flow ultrafiltration (TFUF) was used as an enrichment method for recovering enteric virus in water samples. Interestingly, the bacteriophage MS2 recovery in reclaimed water and the reclaimed water without particles were higher than that in ultrapure water. The simulated reclaimed water experiments showed that humic acid (HA) (92.16% ± 4.32%) and tryptophan (Try) (81.50 ± 7.71%) enhanced MS2 recovery, while the presence of kaolin (Kaolin) inhibited MS2 recovery with an efficiency of 63.13% ± 11.17%. Furthermore, Atomic force microscopy (AFM) revealed that the MS2-HA cluster and the MS2-Try cluster had larger roughness values on the membrane surface, making it difficult to be eluted, whereas MS2-Kaolin cluster had compact surfaces making it difficult to be eluted. Additionally, the MS2-HA cluster is bound to the membrane by single hydrogen bond with SO, whereas both the MS2-Try cluster and the MS2-Kaolin cluster are bound to the membrane by two hydrogen bonds, making eluting MS2 challenging. These findings have potential implications for validating standardized methods for virus enrichment in water samples.

Synergistic adsorption and photocatalytic degradation of tetracycline using a Z-scheme kaolin/g-C3N4/MoO3 nanocomposite: A sustainable approach for water treatment.

This research focuses on the synthesis and application of a novel kaolin-supported g-C3N4/MoO3 nanocomposite for the degradation of tetracycline, an important antibiotic contaminant in water systems. The nanocomposite was prepared through a facile and environmentally friendly approach, leveraging the adsorption and photocatalytic properties of kaolin, g-C3N4 and MoO3 nanoparticles, respectively. Comprehensive characterization of the nanocomposite was conducted using techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR) and optical spectra. The surface parameters were studied using N2 adsorption-desorption isotherm. The elemental composition was studied using X-ray photoelectron spectroscopy. The efficiency of the developed nanocomposite in tetracycline degradation was evaluated and the results revealed an efficient tetracycline degradation exhibiting the synergistic effects of adsorption and photocatalytic degradation in the removal process. The tetracycline degradation was achieved in 60 min. Kinetic studies and thermodynamic analyses provided insights into the degradation mechanism, suggesting potential applications for the nanocomposite in wastewater treatment. Additionally, the recyclability and stability of the nanocomposite were investigated, demonstrating its potential for sustainable and long-term application in water treatment.

Influence of kaolin and red clay on ceramic specimen properties when galvanic sludge is incorporated to encapsulate heavy metals.

This study presented the influence of two types of clay: kaolin (Kao) and red clay (RC) on the chemical and physical properties of ceramic specimens when galvanic sludge (GS) is incorporated to encapsulate heavy metals. Samples were obtained of GS from the industrial district of Manaus - Amazonas State, Brazil, and kaolin (Kao), and red clay (RC) from the Central Amazon. A fourth sample was prepared by mixing GS, Kao, and RC in the ratio 1:1:8 (GS + Kao + RC). This mixture was ground, and ceramic specimens were prepared, and heat treated at 950 °C and 1200 °C for three hours for phase detection, compressive strength, leaching of Fe, Ni and Cr metals and life cycle assessment. Galvanic sludge, Kao, and RC were also, and heat treated to at 950 °C and 1200 °C for three hours, obtaining GS950, GS1200, Kao950, Kao1200, RC950, and RC1200. The samples were submitted to XRF, XRD, Rietveld refinement, Mössbauer spectroscopy, TG/DTG/DSC, and SEM. The results show that the formation of nickel oxide and a spinel solid solution of the type Fe3+{Fe1-y3+,Fe1-x2+,Nix2+,Cry3+}O4 (in which [] = tetrahedral site, {} octahedral site) occurs in GS1200, which is caused by sulfate decomposition to SO2. At 1200 °C, heavy metals are encapsulated, forming other phases such as nickel silicate and hematite. Life cycle assessment was used to verify the sustainability and value of GS in clay for making bricks, and it indicated that the production of ceramics is feasible, reduces the use of clays, and is sustainable.

Thermo-catalytic pyrolysis of sewage sludge and techno-economic analysis: The effect of synthetic zeolites and natural sourced catalysts.

This work focuses to the value added utilization of animal sewage sludge into gases, bio-oil and char using synthetic zeolite (ZSM-5 and Y-zeolite) and natural sourced (diatomite, kaolin, perlite) materials as catalysts. Pyrolysis was performed in a one-stage bench-scale reactor at temperatures of 400 and 600 °C. The catalyst was mixed with the raw material before the pyrolysis. Catalysts had a significant effect on the yield of products, because the amount of volatile products was higher in their presence, than without them. In case of kaolin, due to the structural transformation occurring between 500-600 °C, a significant increase in activity was observed in terms of pyrolysis reactions resulting in volatiles. The hydrogen content of the gas products increased significantly at a temperature of 600 °C and in thermo-catalysts pyrolysis. In the presence of catalysts, bio-oil had more favourable properties.

Kaolin loaded gelatin sponges for rapid and effective hemostasis and accelerated wound healing.

Severe trauma with massive active blood loss, including liver and spleen rupture, arterial bleeding and pelvic fracture, will lead disability, malformation and even death. Therefore, it is very important to develop new, fast and efficient hemostatic materials. In this study, a novel Gelatin/Kaolin (GE/KA) composite sponge was developed. Meanwhile, to further investigate the effect of kaolin content on sponge properties, we prepared four types of sponges: GE/5% KA, GE/10% KA, GE/15% KA and GE/20% KA. The results of coagulation test in vitro showed that compared to the other groups, there were more activated adhered platelets and red blood cells on the surface of GE/15% KA. The results of hemostasis test in vivo showed that compared to other experimental groups, the GE/15% KA group had significantly less hemostasis time (liver hemostasis model: 69.50 ± 2.81 s; femoral artery hemostasis model: 75.17 ± 3.06 s) and bleeding volume (liver hemostasis model: 219.02 ± 10.39 mg; femoral artery hemostasis model: 948.00 ± 50.69 mg), and was similar to the commercial hemostasis material group. Additionally, the material properties of the sponge were characterized and its biocompatibility was verified as well through cell experiments and in vivo embedding experiments. All these results indicate that the optimal content of kaolin is 15%, which provides a theoretical basis for subsequent research. All in all, the novel GE/KA composite sponge prepared in this study can be used as a multifunctional hemostatic wound dressing for the treatment of complex wounds under various trauma scenes.