Assessment of the Efficacy and Bond Strength of Different Dentin-bonding Agents with Adhesives on Primary Teeth: An In Vitro Study.

AIM: The purpose of this study was to evaluate the effectiveness and strength of three various dentin-bonding agents used with adhesives on primary teeth. MATERIALS AND METHODS: The study used 80 recently extracted, healthy human maxillary anterior primary teeth that had undergone physiologic resorption, or over-retention. Teeth were cut to expose a flat dentin surface at a depth of 1.5 mm. All samples were divided into four groups (20 samples in each group) as follows: Group I-Control group, Group II-Primary teeth bonding with 6th-generation bonding agent, Group III-Primary teeth bonding with 7th-generation bonding agent, Group IV-Primary teeth bonding with 8th-generation bonding agent. All of the samples' dentinal surfaces were covered with composite resin using a Teflon mold after adhesive had been applied. A universal testing machine (INSTRON) was used to assess the shear bond strength. Data were collected and statistically analyzed. RESULTS: The maximum mean shear bond strength was found in 8th-generation bonding agent (30.76 ± 0.16), followed by 7th-generation bonding agent (26.08 ± 0.21), 6th-generation bonding agent (25.32 ± 0.06), and control group (6.18 ± 0.09). Statistically significant difference was found between the three different bonding agents (p < 0.001). CONCLUSION: On conclusion, the 8th-generation bonding agent demonstrated a greater shear bond strength to dentin than the 7th and 6th-generation bonding agent. CLINICAL SIGNIFICANCE: The emergence of different bonding techniques to the market improves the durability and quality of restorations. An effective bonding to the tooth would also reduce bacterial penetration, marginal microleakage, possibility of pulpal inflammation preserve tooth structure, and postoperative sensitivity by allowing less cavity preparation. How to cite this article: Alqarni AS, Al Ghwainem A. Assessment of the Efficacy and Bond Strength of Different Dentin-bonding Agents with Adhesives on Primary Teeth: An In Vitro Study. J Contemp Dent Pract 2024;25(4):342-345.

Desensitizing efficacy of a universal dentin adhesive containing mesoporous bioactive glass on dentin hypersensitivity: a randomized clinical trial with a split-mouth model.

This split-mouth blinded randomized controlled study compared the efficacy of a desensitizing agent with oxalate/resin polymer and a universal adhesive containing mesoporous bioactive glass (MBG) for dentin hypersensitivity (DH) relief, using Schiff sensitivity score (SSS) and visual analog scale (VAS). Split quadrants containing teeth with DH were treated with either MS Coat ONE or Hi-Bond Universal with MBG as the functional additive. Assessments at baseline, immediately post-application, and at 1- and 2-week follow-ups used standardized stimulus protocols (air, cold, and acid). The SSS difference was the primary outcome, while the VAS difference was the secondary outcome. A mixed linear effect model performed statistical analysis. Immediate DH reduction occurred in response to air stimuli, with a significant decrease in Group HB than in Group MS (p = 0.0178). Cold stimulus reduction exhibited a gradual cumulative effect, with consistently greater reductions in Group HB than in Group MS (p ≤ 0.0377). Both groups effectively managed acidic stimuli, with no significant differences (p > 0.05). The VAS scores decreased gradually over the follow-up period (p < 0.0001). This study highlights the differential efficacy of treatments for various DH triggers and recommends specific approaches based on different stimulus types. The universal adhesive containing MBG demonstrated DH relief potential, promising efficacy identical to or superior to that of a dedicated desensitizing agent. Further research exploring the long-term efficacy and underlying mechanisms is warranted. The universal adhesive containing MBG can be adopted as an in-office desensitizing agent for DH relief. The desensitizing efficacy of universal adhesive matches or surpasses dedicated agents for air and cold stimuli.

Micro-shear Bond Strength of an Alternative Self-etch Application of "No Wait" Universal Adhesive to Caries-affected and Sound Dentin in Permanent and Primary Teeth.

OBJECTIVE: This study aimed to compare the micro-shear bond strength (µSBS) of caries-affected dentin (CAD) and sound dentin (SoD) in primary and permanent teeth using an alternative self-etch application of "no wait" universal adhesive. METHODS AND MATERIALS: Flat midcoronal dentin surfaces from 72 permanent third molars and 72 second primary molars were distributed randomly into 12 groups according to the substrate SoD and artificially-created CAD (pH cycling for 14 days) and the adhesive system (GLUMA Bond5, a two-step etch & rinse adhesive, GLUMA Bond, a one-step self-etch adhesive, and Tokuyama Universal Bond, a one-step self-etch adhesive) (n=12). Bonded dentin resin discs were put through micro-shear bond strength testing after 10,000 thermocycles. The results were evaluated using two-way ANOVA and the Bonferroni test with a significance level of α = 0.05. RESULTS: When compared to SoD, the etch & rinse system's test results on artificially created CAD showed a statistically significant poorer bonding performance in both permanent and primary teeth in all groups (p<0.05). While the bond strengths of permanent teeth using total-etch adhesive on sound dentin were statistically significantly higher than those using Tokuyama Universal Bond adhesive (p<0.05), there was no significant difference in sound dentin in primary teeth (p>0.05). CONCLUSIONS: The etch & rinse system performed the poorest of all adhesive systems on CAD. The Tokuyama Universal Bond's adhesive strength was similar in SoD and CAD on primary teeth. The use of Tokuyama Universal Adhesives can speed up restorative treatment in pediatric dentistry.

In vitro damping and strain distribution for implant-supported crowns using 5 different CAD-CAM crowns and 3 different luting cements.

STATEMENT OF PROBLEM: Dental implants are particularly susceptible to occlusal overloading because, unlike natural teeth, they lack a periodontal ligament to help absorb occlusal forces. However, studies evaluating the impact of different crown and luting materials on the damping behavior and strain distribution of implant-supported crowns are lacking. PURPOSE: The purpose of this in vitro study was to investigate the damping behavior and strain distribution of peri-implant bone associated with 5 different CAD-CAM implant-supported crowns and 3 luting materials. MATERIAL AND METHODS: A titanium implant was embedded in a plastic tube with epoxy resin and 5 different crown materials (polymethyl methacrylate, resin-infiltrated ceramic, lithium disilicate, titanium, and zirconia) luted to prosthetic abutments with 3 different luting materials (zinc oxide non-eugenol cement, zinc phosphate cement, and adhesive resin cement) and an uncemented condition were tested (n=5). Strain gauges were attached at the crestal and apical levels of the implant model. All specimens were load tested from 0 to 200 N. Slopes of load/time, microstrain/time, and time required to reach the maximum load were examined to represent the damping behavior. Absolute maximum strain (AMS) and its occurrence level were examined to represent the strain distribution. Two-way ANOVA, followed by the Tukey HSD test, were used for statistical analysis (α=.05). RESULTS: All slopes and times to reach the maximum load in each crown material were statistically similar (P>.05), except for the polymethyl methacrylate group, which showed less steepness in all slopes and more time required to reach the maximum load significantly (P<.05). Both the polymethyl methacrylate group (224.5 ±30.2) and the titanium group (224.0 ±24.3) exhibited significantly higher AMS at the crestal level compared with the resin-infiltrated ceramic group (210.6 ±5.0) (P<.05). The lithium disilicate (218.1 ±15.0) and zirconia groups (217.3 ±14.8) demonstrated comparable AMS values with the others (P>.05). The uncemented group demonstrated steeper slopes and less time required to reach the maximum load compared with the adhesive resin group (P<.05), while slopes and times of the zinc phosphate and zinc oxide non-eugenol groups were comparable (P>.05). The uncemented group (242.7 ±25.3) exhibited significantly higher AMS at the crestal level than the other groups (P<.05). CONCLUSIONS: The crown material significantly affected the damping behavior of peri-implant bone, unlike the luting material. Polymethyl methacrylate with a high damping behavior exhibited high strain at the crestal level. In contrast, resin-modified ceramic with a moderate damping behavior exhibited low strain at the crestal level. Strain at the crestal level could be effectively reduced by approximately 13% through cementation.

Comparative evaluation of cervical pulpotomy and pulpectomy for primary molars with irreversible pulpitis: a multicentre randomised controlled trial.

PURPOSE: The objective of this multicentre randomised controlled trial was to compare the clinical/radiographic outcomes of cervical pulpotomy using calcium-enriched mixture cement (PCEM) and pulpectomy using Metapex (PM) in primary molars with irreversible pulpitis (IP). METHODS: A total of 134 primary molars from 94 children were randomly assigned to two intervention groups: the PCEM group (n = 74) and the PM group (n = 60). Baseline characteristics including age/gender/molar type/tooth type/jaw were recorded. The primary outcome measures were clinical/radiographic success rates assessed at the first and second follow-up appointments. Secondary outcomes included reasons for clinical/radiographic failures. Multiple logistic regression analysis was performed to determine the impact of various factors on the success rates. RESULTS: The mean age of the participants in both groups was similar (PCEM group: 5.4 years, PM group: 5.5 years). Gender distribution, molar type, tooth type, jaw, and number of practitioners were comparable between the groups. The clinical success rate at the first follow-up was 98.6% in the PCEM group and 96.4% in the PM group. At the second follow-up, the clinical success rate was 97.1% in the PCEM group and 91.1% in the PM group. The radiographic success rates at the first and second follow-up were 98.6% and 96.4% in the PCEM group and 96.4% and 91.1% in the PM group, respectively. Multiple logistic regression analysis did not reveal any significant association between the success rates and age/gender/molar type/jaw, or treatment groups (P > 0.05). CONCLUSION: In primary molars with IP, both simple/conservative cervical pulpotomy using calcium-enriched mixture cement and pulpectomy using Metapex demonstrated high clinical/radiographic success rates. No significant differences were observed between the two treatment modalities. These findings suggest that both techniques can be considered effective treatment options for managing primary molars with IP. TRIAL REGISTRATION NUMBER: Trial registration number: IRCT20201226049838N1, retrospectively registered on 12 January 2021.

The stress distribution of a primary molar tooth restored with stainless steel crown using different luting cements.

BACKGROUND: The aim of this study is to evaluate the stress distributions of a primary molar tooth restored with a stainless steel crown (SSC) using resin and glass ionomer luting cements by Finite Element Analysis (FEA). METHODS: Original DICOM data of a primary molar was used to create a 3D model. One model was prepared as a tooth model with SSC. A 30 µm cement layer was used in model. Two different luting cements were tested in the study: self-cure adhesive resin cement, and glass ionomer cement. Vertical and oblique loads of 330 N were applied to simulate maximum bite force and lateral forces in the occlusal contact areas of the models. Maximum von Mises stress values in the models were evaluated as MPa. RESULTS: The maximum von Mises stress value was observed in the force application and general occlusal contact areas for all models. The maximum von Mises stress values were higher in the tooth model with SSC using self-cure adhesive resin cement (478.09 MPa and 214.62 MPa) than in the tooth model with SSC using glass ionomer cement (220.06 MPa and 198.72 MPa) in both vertical and oblique loading, respectively. CONCLUSIONS: Depending on the magnitude of the bite force on the SSC, fracture of the luting cement materials could occur if the stress exceeds the endurance limit of the luting cement. Cementation with glass ionomer cement may help to reduce stress levels in SSC restorations of primary molars in children.

Prolonged application time effects on universal adhesives in non-carious cervical lesions: An 18-month split mouth randomized clinical trial.

OBJECTIVE: This double-blind, split mouth randomized clinical trial aimed to assess the clinical performance of Clearfil Universal Bond Quick (CBUq) universal adhesive under different application times (no waiting and waiting) compared to Clearfil SE Bond adhesive in non-carious cervical lesions (NCCLs) over 18 months. METHODS: One hundred and eighty-three restorations were distributed randomly into three groups based on the adhesive system and waiting time: CUBq without waiting time (CUBq-NW), CUBq with a 20 s waiting time (CUBq-W), and CSE with a 20 s waiting time. After placement, restorations were evaluated after 18 months using the International Dental Federation (FDI) and United States Public Health Service (USPHS) criteria. Statistical analyses involved Friedman repeated measures analysis of variance and Wilcoxon tests, with a significance level set at 5 %. RESULTS: Over the 18-month period, no restorations were lost across the tested groups. Marginal adaptation evaluation indicated minor discrepancies in 21 restorations (8 CUBq-NW, 6 CUBq-W, and 7 CSE). There were no significant differences observed among the three groups following the 18-month clinical assessment (p > 0.05). Only two restorations showed marginal discoloration after 18 months (1 CUBq-NW and 1 CSE). CONCLUSIONS: The application of Clearfil Universal Bond Quick using either the "waiting" or "no-waiting" technique exhibited excellent clinical results in NCCLs during the 18-month follow-up period, demonstrating comparable performance to Clearfil SE Bond in all assessed outcomes. CLINICAL SIGNIFICANCE: The findings suggest that the new universal adhesive applied using the no-waiting technique demonstrates promising clinical performance when compared to conventional application methods. TRIAL REGISTRATION: ClinicalTrials.gov identifer RBR-69p7mpr.

Systematic review and network meta-analysis of restorative therapy and adhesive strategies in root caries lesions.

AIM: This systematic review and network meta-analysis (NMA) aimed to establish a clinically relevant hierarchy of the different adhesive and/or restorative approaches to restore cavitated root caries lesions through the synthesis of available evidence. MATERIALS AND METHODS: A systematic search was conducted in Medline/Web of Science/Embase/ Cochrane Library/Scopus/grey literature. RCTs investigating ≥2 restorative strategies (restorative /adhesive materials) for root caries lesions in adult patients were included. Risk of bias within studies was assessed (Cochrane_RoB-2) and the primary outcome was survival rate of restorations at different follow-up times (6-/12-/24-months). Network meta-analyses were conducted using a random effects model stratified by follow-up times. I2-statistics assessed the ratio of true to total variance in the observed effects. All available combinations of adhesives (1-SE: one-step self-etch; 2-3ER: two-/three-step etch-and-rinse) and restorative materials (conventional composite (CC) as well as conventional and resin-modified glass ionomer cements (GIC, RMGIC)) were included. Risk of bias across studies and confidence in NMA (CINeMA) were assessed. RESULTS: 547 studies were identified and nine were eligible for the NMA. In total, 1263 root caries lesions have been restored in 473 patients in the included clinical trials. Patients involved were either healthy (n = 6 trials), living in nursing homes (n = 1 trial) or received head-and-neck radiotherapy (n = 2 trials). There was statistically weak evidence to favour either of material/material combination regarding the survival rate. A tendency for higher survival rate (24-months) was observed for 2-3ER/CC (OR24mths 2.65; 95%CI=1.45/4.84) as well as RMGIC (OR24mths 2.05; 95%CI=1.17/3.61) compared to GIC. These findings were though not statistically significant and confidence of the NMA was low. CONCLUSION: An evidence-based choice of restorative strategy for managing cavitated root caries lesions is currently impossible. There is a clear need for more standardised, well-designed RCTs evaluating the retention rate of root caries restoration approaches.

Evaluating the effect of poly (amidoamine) treated bioactive glass nanoparticle incorporated in universal adhesive on bonding to artificially induced caries affected dentin.

BACKGROUND: The purpose of this study was to evaluate remineralisation and its effect on microtensile bond-strength of artificially induced caries affected dentin (CAD) when treated with a commercial universal adhesive modified with poly(amidoamine) dendrimer (PAMAM) loaded mesoporous bioactive glass nanoparticles (A-PMBG). MATERIAL AND METHODS: Mesoporous bioactive glass nanoparticles (MBG) were synthesised using sol-gel process, where PAMAM was loaded (P-MBG) and added to commercial adhesive at different weight percentages (0.2, 0.5, 1 and 2 wt%). First, rheological properties of commercial and modified adhesives were evaluated. The effect of remineralization/hardness and microtensile bond-strength (MTBs) of those samples that mimicked the rheological properties of commercial adhesives were evaluated using Vickers hardness tester and universal testing machine respectively. Scanning-Electron microscope was used to visualize failed samples of MTBs and remineralization samples. Both evaluations were carried out at 1-,3 and 6-month intervals, samples being stored in stimulated salivary fluid during each time interval. RESULTS: Addition of nanoparticles altered the rheological properties. With increase in the weight percentage of nanoparticles in commercial adhesive, there was significant increase in degree of conversion, viscosity and sedimentation rate (p < 0.05). The 0.2 and 0.5 wgt% groups closely mimicked the properties of commercial adhesive and were evaluated for remineralization and MTBs. After 6 months, 0.2wgt% group showed increased MTBs (p < 0.05) and 0.5wgt% group increased remineralization/hardness (p < 0.05). CONCLUSION: The complex of PAMAM-MBG-Universal adhesive can remineralize the demineralised CAD thereby improving its bond-strength when evaluated for up to 6-months.

What's New in Glue: Utilizing Universal Resin Cement for Non-Ideal Situations in Prosthodontics.

Dentists frequently encounter the need to cement indirect restorations in clinical situations that are less than ideal, and the longevity and predictability of the indirect restorative materials used in such cases is largely predicated on the chemical and/or mechanical bond formed between the natural tooth or abutment and the cement. These non-ideal scenarios have been a significant driver in the continued evolution of self-adhesive resin cements (SARCs) with added functional monomers, such as 10-MDP. This article discusses three real-world case studies in which a newly developed universal SARC was utilized and combined with the use of an optional adhesive-enhancing primer that employs a proprietary "touch-cure" technology, or a light-cured adhesive, to improve the bond strength of the resin cement and enhance patient outcomes.

Effect of Chlorhexidine on the Bonding Effect of an Etch-and-Rinse Adhesive to Pretreatment Dentin.

The purpose of this study was to evaluate the effect of 2% chlorhexidine (CHX) on an etch-and rinse adhesive to dentin. Caries-free molars were selected and processed to expose a flat dentin surface. The specimens were bonded with a composite resin by an etch-and-rinse adhesive, which was pretreated with 2% CHX for 0, 15, 30, 45, and 60 seconds. The microtensile bond strength (MTBS) was evaluated before and after thermocycling. No significant differences were observed between groups before thermocycling. The 60-second CHX-pretreated group showed a significantly greater MTBS than the control group after thermocycling. The 2% CHX pretreatment could improve the bonding strength of the etch-and-rinse adhesive and slow down the aging progress of the bonding interface.

Resin cement selection for different types of fixed partial coverage restorations: A narrative systematic review.

OBJECTIVE: The aim of this study was to review the selection criteria of resin cements for different types of partial coverage restorations (PCRs) and investigate if the type of restorations or restorative materials affect the type of selected resin cement. MATERIALS AND METHODS: An electronic search (1991-2023) was performed in PubMed, Medline, Scopus, and Google Scholar databases by combinations of related keywords. RESULTS: A total of 68 articles were included to review the selection criteria based on the advantages, disadvantages, indications, and performance of resin cements for different types of PCRs. CONCLUSIONS: The survival and success of PCRs are largely affected by appropriate cement selection. Self-curing and dual-curing resin cements have been recommended for the cementation of metallic PCRs. The PCRs fabricated from thin, translucent, and low-strength ceramics could be adhesively bonded by light-cure conventional resin cements. Self-etching and self-adhesive cements, especially dual-cure types, are not generally indicated for laminate veneers.

The Effect of Ground and Unground Enamel on the Clinical Performance of Direct Composite Build-up After Orthodontic Treatment: Five Years of Follow-up.

PURPOSE: To assess the clinical performance of restorations with ground and unground enamel for diastema closure. METHODS AND MATERIALS: Twenty-four patients attended and received two to ten composite build-ups for diastema closure. The restorations were performed separately by grinding and not grinding the enamel on the proximal surfaces on symmetric teeth. A nanofill direct composite (Filtek Ultimate Universal Restorative System, 3M ESPE, St Paul, MN, USA) was used with a three-step etch-and-rinse adhesive (Scotchbond Multi-Purpose, 3M ESPE) for restorations. Restorations were evaluated according to the modified United States Public Health Service (USPHS) criteria at baseline and 1-, 2-, 3-, 4-, and 5-year recalls. RESULTS: The cumulative success rate of direct composite build-up with ground and unground enamel was 100% and 88.7%, respectively. Six restorations with unground enamel failed due to fracture. No significant difference was found between the restorations with ground enamel and unground enamel with regard to the evaluation criteria. CONCLUSION: The 5-year success rates of restorations with ground and unground enamel were excellent. The success rate of restorations with ground enamel was higher than that of restorations with unground enamel. Fracture was the reason for failure in the restorations with unground enamel.

Effect of the Absence of HEMA on the Bonding Properties of Universal Adhesive Systems Containing 10-MDP: An In Vitro Study.

OBJECTIVES: To evaluate the absence of 2-hydroxyethyl methacrylate (HEMA) on the adhesive properties with enamel and dentin of universal adhesive systems containing 10-methacryloyloxydecyl dihydrogen phosphate (MDP). METHODS AND MATERIALS: One hundred and twelve caries-free third molars were used to test adhesion to dentin (n=64) and enamel (n=48). For each substrate, teeth were divided into eight experimental groups: four different adhesives each using two adhesive strategies. The adhesives used were: (1) Scotchbond Universal (SBU, 3M Oral Care, St Paul, MN, USA) as a HEMA-containing universal adhesive; (2) Gluma Bond Universal (GBU, Kulzer, Hanau, Germany); (3) Solare Universal Bond (SUB, GC, Tokyo, Japan); and (4) Zipbond Universal (ZIP, SDI, Victoria, Australia) as HEMA-free universal adhesives. The adhesive strategies used were etch-and-rinse (ER) and self-etch (SE). For dentin tests, the occlusal third of the crown of all teeth was removed and an adhesive protocol was applied. After completing the restoration, specimens were sectioned into bonded sticks (0.8 mm 2) and tested for microtensile bond strength (µTBS), in situ degree of conversion (DC), and nanoleakage (NL) by scanning electron microscopy. For enamel tests, teeth were sectioned into four parts (buccal, lingual, and proximal), and an adhesive protocol was applied. After completing the restoration, the specimens were tested for their microshear bond strength (µSBS). For in situ degree of conversion (DC) and nanoleakage (NL) evaluation of enamel, the specimens were sectioned in slices to be evaluated. The data for each substrate were subjected to two-way ANOVA and Tukey's test (α=0.05) for each property evaluated. RESULTS: The SBU and ZIP adhesives showed the highest µSBS, and DC (dentin and enamel) and lower NL (dentin) values compared to GBU and SUB (p=0.001). However, SBU showed better results in terms of µTBS and µSBS (SE strategy), and DC (dentin and enamel) than ZIP. Strategy ER presented higher values of µTBS and µSBS when compared to strategy SE (p=0.001), except for SBU. CONCLUSION: The effect of the absence of HEMA in commercial universal adhesive systems on enamel and dentin adhesive properties appears to be material-dependent.

Marginal Integrity of Simplified Adhesive Strategies in Primary Teeth.

OBJECTIVE: The aim of this research was to investigate the effect of simplified adhesive strategies (self-etch vs selective enamel etch and 10- vs 20-second adhesive application time) on the marginal integrity in primary molars. METHODS: Forty deep class-II cavities were prepared in 40 extracted primary molars. The molars were divided into 4 groups based on the applied universal adhesive strategy as follows: groups 1 and 2: selective enamel etch with 20- or 10-second application time and groups 3 and 4: self-etch with 20- or 10-second application time. All cavities were restored with a sculptable bulk-fill composite restoration. The restorations underwent a thermomechanical loading (TML, 5-50 °C, 2-minute dwelling time, ×1000; 400,000 loading cycles, 1.7 Hz, 49 N). Marginal analysis before and after TML was conducted with scanning electron microscopy and the marginal integrity of each restoration was calculated as a percentage of continuous margins. A beta regression model was adopted to statistically analyse the data with a consequent pairwise comparison. RESULTS: The mean marginal integrity (% ± SD) of the restorations for each tested adhesive strategy after TML was as follows: selective enamel etch/20 seconds = 85.4 ± 3.9, self-etch/20 seconds = 85.3 ± 5.2, self-etch/10 seconds = 80.1 ± 8.2, and selective enamel etch/10 seconds = 80.0 ± 8.5. The difference between both adhesive strategies was not statistically significant at the same application time. The difference between both application times within the same adhesive strategy was statistically significant (P ≤ .01). CONCLUSIONS: Universal adhesives applied either in selective enamel etch or in self-etch mode result in comparable marginal integrities when restoring class-II cavities in primary molars. Shortened adhesive application time (10 seconds) could lead to a reduction in the marginal integrity in comparison to the recommended application time of 20 seconds.

Does Acid Etching Influence the Adhesion of Universal Adhesive Systems in Noncarious Cervical Lesions? A Systematic Review and Meta-analysis.

OBJECTIVE: To evaluate the adhesion of universal adhesive systems to the dentin of noncarious cervical lesions (NCCLs) by comparing the etch-and-rinse and self-etch strategies through a systematic review and meta-analysis. METHODS: Systematic electronic searches were performed by two independent reviewers into the following databases: PubMed/MEDLINE, Scopus, Web of Science, and Cochrane Library until December of 2021. Only randomized clinical trials were selected, comparing etch-and-rinse and self-etch strategies and using universal adhesive systems in NCCLs. This systematic review was conducted according to the PRISMA guidelines and registered into PROSPERO. RESULTS: After the removal of duplicates, 170 articles were identified. In an initial screening of titles and abstracts, 146 records did not satisfy the inclusion criteria and were, therefore, excluded. Twenty-four studies were eligible for evaluation of the full text, and four were excluded after this step. Finally, 20 randomized clinical trials were included in this systematic review and meta-analysis. CONCLUSION: This systematic review and meta-analysis revealed that applying universal adhesive systems in the etch-and-rinse strategy could lead to better medium-term (>12 to 36 months) retention of NCCL restorations than the self-etch strategy, as well as resulting in lower percentages of marginal discoloration, marginal adaptation, and secondary caries. However, the use of a self-etching strategy can lead to lower postoperative sensitivity.

Apexification with a bioceramic reparative cement: a case report.

The aim of this case report is to describe the treatment of a maxillary right central incisor with pulpal necrosis and incomplete root formation. The 14-year-old patient had experienced trauma to both maxillary central incisors approximately 2 years earlier. Therapy consisted of apexification with a bioceramic reparative cement to form an apical plug. After the clinical and radiographic evaluations, the clinician opened the crown, performed the chemical-mechanical preparation, and placed calcium hydroxide-based medication. At the next appointment, 24 days later, the intracanal medication was removed through passive ultrasonic instrumentation; the canal was dried; and the bioceramic cement was inserted into the apical portion with the aid of a mineral trioxide aggregate holder. A sterile cotton ball, moistened with distilled water, was used to maneuver the material in the apical region, and a periapical radiograph was exposed to confirm the correct placement of the bioceramic reparative cement. The canal was filled with gutta percha cones and a bioceramic root canal sealer. All procedures were performed with the aid of microscopic magnification. Clinical and radiographic evaluations at the 18-month follow-up visit showed that the treated tooth was asymptomatic, suggesting that the bioceramic reparative cement is effective for apexification.

Optical properties of esthetic temporary cements and final restoration color.

BACKGROUND: Opaque cements can be esthetically unfavorable and alternative translucent materials have been developed. The aim of this study was to evaluate the color interference of a new translucent cement compared with conventional materials, in association with interim restoration with different thickness and shades. METHODS: Bis-acryl composite disks were prepared in 2 thicknesses (1.2 mm, 0.6 mm) and 3 shades (A3.5, A2, bleached) to simulate the restorations. Cementation over dentin disks was performed with 1 translucent cement (Provicol QM Aesthetic; VOCO), 2 conventional cements (Provicol; VOCO, Temp-Bond NE; Kerr Dental), and 1 transparent liquid (polyethylene glycol 400). The difference between the color of the specimens cemented with the transparent liquid and that of the specimens cemented with each cement was calculated (ΔEab). The data were analyzed using 3-way analysis of variance and Tukey tests (5%). RESULTS: Significant differences were observed for all factors and some interactions (P < .05). For Provicol QM Aesthetic, the shade and thickness did not influence the ΔEab. For Provicol and Temp-Bond NE, the lighter and thinner the specimen, the higher the ΔEab. Only Provicol QM Aesthetic had smaller means than the perceptibility threshold. Temp-Bond NE and Provicol had higher values than the acceptability threshold for some combinations. CONCLUSIONS: The highly translucent cement had less color interference than the conventional materials. The thickness and resin shade only affected the results for the opaque cements. The thinner specimens and the lighter shades had higher color interference. PRACTICAL IMPLICATIONS: The use of a more translucent cement can produce a smaller color interference on the esthetic outcome of interim restorations.

Tough Adhesive Hydrogel for Intraoral Adhesion and Drug Delivery.

Oral lichen planus (OLP) and recurrent aphthous stomatitis (RAS) are common chronic inflammatory conditions, manifesting as painful oral lesions that negatively affect patients' quality of life. Current treatment approaches are mainly palliative and often ineffective due to inadequate contact time of the therapeutic agent with the lesions. Here, we developed the Dental Tough Adhesive (DenTAl), a bioinspired adhesive patch with robust mechanical properties, capable of strong adhesion against diverse wet and dynamically moving intraoral tissues, and extended drug delivery of clobetasol-17-propionate, a first-line drug for treating OLP and RAS. DenTAl was found to have superior physical and adhesive properties compared to existing oral technologies, with ~2 to 100× adhesion to porcine keratinized gingiva and ~3 to 15× stretchability. Clobetasol-17-propionate incorporated into the DenTAl was released in a tunable sustained manner for at least 3 wk and demonstrated immunomodulatory capabilities in vitro, evidenced by reductions in several cytokines, including TNF-α, IL-6, IL-10, MCP-5, MIP-2, and TIMP-1. Our findings suggest that DenTAl may be a promising device for intraoral delivery of small-molecule drugs applicable to the management of painful oral lesions associated with chronic inflammatory conditions.

Effect of Extra Hydrophobic Resin Layer on Bonding of Universal Adhesive Systems to Enamel.

OBJECTIVE: The objective of this study was to compare the effect of solvent in universal adhesives (UA) and the application of an extra layer of hydrophobic bonding resin on enamel shear bond strengths (SBS). METHODS AND MATERIALS: Crowns of 224 bovine mandibular incisors were embedded in acrylic resin, wet-polished up to 600-grit silicon carbide paper and assigned to 3 UAs with different solvents (n=32): ethanol-based UA (ADU, AdheSE Universal, Ivoclar Vivadent); isopropanol-based UA (PBU, Prime&Bond Universal, Dentsply Sirona); and acetone-based UA (OPT, OptiBond Universal, Kerr Co). The same UAs were also applied with an extra layer of a hydrophobic bonding resin (HLB, Heliobond, Ivoclar Vivadent): ADU + HLB; PBU + HLB; and OPT + HLB. HLB alone was used as control. Enamel was etched with 37.5% H3PO4 (Kerr Gel Etchant, Kerr Co) for 15 seconds, rinsed with water, and air dried. UAs were applied according to the respective manufacturer's instructions. After adhesive application, composite cylinders (Filtek Z250, 3M Oral Care) were built up and light-cured (40 seconds/increment, 40 J/cm2) keeping the light tip in contact with the mold. Specimens were stored in water for 24 hours (24H) or for 6 months (6M). A knife-edged metallic rod (Ø=2.8-mm semicircular notch) loaded the composite cylinders until fracture. Mode of failure was analyzed with optical microscopy (40×). Statistics included twoway analysis of variance (ANOVA; adhesive strategy and water storage) and Tukey honestly significant difference (HSD) post hoc test (α=95%). RESULTS: Mean enamel SBS ranged from 3.6 (±2.2) MPa (HLB/6M) to 24.7 (±7.1) MPa (ADU + HLB/6M). ANOVA revealed significant differences for adhesive strategy (p≤0.001) but no significant differences for water storage (p>0.05). All UAs resulted in similar mean enamel SBS with or without an extra layer of HLB at 24H. After 6M, only ADU resulted in higher enamel SBS when an extra layer of HLB was applied. All UAs resulted in higher mean enamel SBS than HLB (control). Most failures were adhesive exception for PBU/HLB/6M, which had mostly mixed failures. CONCLUSIONS: UAs resulted in statistically higher enamel SBS than the nonsolvated hydrophobic bonding resin (control), regardless of the solvent in their composition. Application of an extra layer of hydrophobic bonding resin over UAs did not improve mean enamel SBS for isopropanol- and acetone-based UAs but did improve mean enamel SBS for the ethanol-based UA after 6M. Resin composite bonding to enamel using a hydrophobic bonding resin alone is not recommended.