Tissue scaffolds mimicking hierarchical bone morphology as biomaterials for oral maxillofacial surgery with augmentation: structure, properties, and performance evaluation forin vitrotesting.

In this study, tissue scaffolds mimicking hierarchical morphology are constructed and proposed for bone augmentation. The scaffolds are fabricated using lyophilization, before coating them with collagen (Col). Subsequently, the Col-coated scaffolds undergo a second lyophilization, followed by silk fibroin (SF) coating, and a third lyophilization. Thereafter, the scaffolds are divided into six groups with varying ratios of Col to SF: Col/SF = 7:3, 5:5, 3:7, 10:0, and 0:10, with an SF scaffold serving as the control group. The scaffold morphology is examined using a scanning electron microscope, while molecular and structural formations are characterized by Fourier transform infrared spectrometer and differential scanning calorimeter, respectively. Physical and mechanical properties including swelling and compression are tested. Biological functions are assessed throughin vitroosteoblast cell culturing. Biomarkers indicative of bone formation-cell viability and proliferation, alkaline phosphatase activity, and calcium content-are analyzed. Results demonstrate that scaffolds coated with Col and SF exhibit sub-porous formations within the main pore. The molecular formation reveals interactions between the hydrophilic groups of Col and SF. The scaffold structure contains bound water and SF formation gets disrupted by Col. Physical and mechanical properties are influenced by the Col/SF ratio and morphology due to coating. The biological functions of scaffolds with Col and SF coating show enhanced potential for promoting bone tissue formation, particularly the Col/SF (7:3) ratio, which is most suitable for bone augmentation in small defect areas.

Neural shape completion for personalized Maxillofacial surgery.

In this paper, we investigate the effectiveness of shape completion neural networks as clinical aids in maxillofacial surgery planning. We present a pipeline to apply shape completion networks to automatically reconstruct complete eumorphic 3D meshes starting from a partial input mesh, easily obtained from CT data routinely acquired for surgery planning. Most of the existing works introduced solutions to aid the design of implants for cranioplasty, i.e. all the defects are located in the neurocranium. In this work, we focus on reconstructing defects localized on both neurocranium and splanchnocranium. To this end, we introduce a new dataset, specifically designed for this task, derived from publicly available CT scans and subjected to a comprehensive pre-processing procedure. All the scans in the dataset have been manually cleaned and aligned to a common reference system. In addition, we devised a pre-processing stage to automatically extract point clouds from the scans and enrich them with virtual defects. We experimentally compare several state-of-the-art point cloud completion networks and identify the two most promising models. Finally, expert surgeons evaluated the best-performing network on a clinical case. Our results show how casting the creation of personalized implants as a problem of shape completion is a promising approach for automatizing this complex task.

Resorbable engineered barrier membranes for oral surgery applications.

Population aging, reduced economic capacity, and neglecting the treatments for oral pathologies, are the main causal factors for about 3 billion individuals who are suffering from partial/total edentulism or alveolar bone resorption: thus, the demand for dental implants is increasingly growing. To achieve a good prognosis for implant-supported restorations, adequate peri-implant bone volume is mandatory. The Guided Bone Regeneration (GBR) technique is one of the most applied methods for alveolar bone reconstruction and treatment of peri-implant bone deficiencies. This technique involves the use of different types of membranes in association with some bone substitutes (autologous, homologous, or heterologous). However, time for bone regeneration is often too long and the bone quality is not simply predictable. This study aims at engineering and evaluating the efficacy of modified barrier membranes, enhancing their bioactivity for improved alveolar bone tissue regeneration. We investigated membranes functionalized with chitosan (CS) and chitosan combined with the peptide GBMP1α (CS + GBMP1α), to improve bone growth. OsseoGuard® membranes, derived from bovine Achilles tendon type I collagen crosslinked with formaldehyde, were modified using CS and CS + GBMP1α. The functionalization, carried out with 1-ethyl-3-(3 dimethylaminopropyl)carbodiimide and sulfo-N-Hydroxysuccinimide (EDC/sulfo-NHS), was assessed through FT-IR and XPS analyses. Biological assays were performed by directly seeding human osteoblasts onto the materials to assess cell proliferation, mineralization, gene expression of Secreted Phosphoprotein 1 (SPP1) and Runt-Related Transcription Factor 2 (Runx2), and antibacterial properties. Both CS and CS + GBMP1α functionalizations significantly enhanced human osteoblast proliferation, mineralization, gene expression, and antibacterial activity compared to commercial membranes. The CS + GBMP1α functionalization exhibited superior outcomes in all biological assays. Mechanical tests showed no significant alterations of membrane biomechanical properties post-functionalization. The engineered membranes, especially those functionalized with CS + GBMP1α, are suitable for GBR applications thanks to their ability to enhance osteoblast activity and promote bone tissue regeneration. These findings suggest a potential advancement in the treatment of oral cavity problems requiring bone regeneration.

Introduction to Amniotic Membranes in Maxillofacial Surgery-A Scoping Review.

Background: Amniotic membrane (AM) holds significant promise in various medical fields due to its unique properties and minimal ethical concerns. This study aims to explore the diverse applications of the human amniotic membrane (HAM) in maxillofacial surgery. Methodology: A comprehensive search was conducted on databases, namely Google Scholar, PubMed, and Scopus, from January 1985 to March 2024. Articles in English, Polish, and Spanish were included, focusing on keywords related to amniotic membrane and oral surgery. Results: Various preservation methods for HAM were identified, namely fresh, decellularized, cryopreserved, lyophilized, and air-dried formats. Clinical studies demonstrated the efficacy of HAM in repairing oral mucosal defects, vestibuloplasty, oronasal fistula closure, cleft palate treatment, bone defect repair, and medication-related osteonecrosis of the jaw (MRONJ). Surgeon evaluations highlighted the ease of handling but noted challenges in suturing and stability during application. Conclusions: Amniotic membranes offer a versatile and effective option in maxillofacial surgery, promoting wound healing, reducing inflammation, and providing a scaffold for tissue regeneration. Further research, including randomized trials and comparative studies, is warranted to validate the efficacy and optimize the utilization of HAM in clinical practice.

Shaping the 4D frontier in maxillofacial surgery with faceMesh evolution.

OBJECTIVES: This work aims to introduce a Python-based algorithm and delve into the recent paradigm shift in Maxillofacial Surgery propelled by technological advancement. The provided code exemplifies the utilization of the MediaPipe library, created by Google in C++, with an additional Python interface available as a binding. TECHNICAL NOTE: The advent of FaceMesh coupled with artificial intelligence (AI), has brought about a transformative wave in contemporary maxillofacial surgery. This cutting-edge deep neural network, seamlessly integrated with Virtual Surgical Planning (VSP), offers surgeons precise 4D facial mapping capabilities. It accurately identifies facial landmarks, tailoring surgical interventions to individual patients, and streamlining the overall surgical procedure. CONCLUSION: FaceMesh emerges as a revolutionary tool in modern maxillofacial surgery. This deep neural network empowers surgeons with detailed insights into facial morphology, aiding in personalized interventions and optimizing surgical outcomes. The real-time assessment of facial dynamics contributes to improved aesthetic and functional results, particularly in complex cases like facial asymmetries or reconstructions. Additionally, FaceMesh has the potential for early detection of medical conditions and disease prediction, further enhancing patient care. Ongoing refinement and validation are essential to address limitations and ensure the reliability and effectiveness of FaceMesh in clinical settings.

Adoption of additive manufacturing in oral and maxillofacial surgery among university and non-university hospitals in Sweden: findings from a nationwide survey.

PURPOSE: Additive manufacturing (AM) is an innovative printing technology that can manufacture 3-dimensional solid objects by adding layers of material from model data. AM in oral and maxillofacial surgery (OMFS) provides several clinical applications such as surgical guides and implants. However, the adoption of AM in OMFS is not well covered. The purpose was to study the adoption of AM in OMFS in university and non-university hospitals in Sweden. Three research questions were addressed: What is the degree of using AM solutions in university and non-university hospitals?; What are AM solutions used?; How are the AM solutions accessed (production mode) in university hospitals and non-university hospitals? METHODS: A survey was distributed to OMF surgeons in Sweden. The questionnaire consisted of 16 questions. Data were analyzed through descriptive and content analysis. RESULTS: A total of 14 university and non-university hospitals were captured. All 14 hospitals have adopted AM technology and 11 of the hospitals adopted AM in OMFS. Orthognathic and trauma surgery are two major types of surgery that involve AM technology where material extrusion and vat polymerization are the two most used AM technologies in OMFS. The primary application of AM was in medical models and guides. CONCLUSION: Majority of Swedish university hospitals and non-university hospitals have adopted AM in OMFS. The type of hospital (university or non-university hospital) has no impact on AM adoption. AM in OMFS in Sweden can be perceived to be a mature clinical application.

Knowledge mapping and research trends of distraction osteogenesis in oral and maxillofacial surgery.

BACKGROUND: Distraction osteogenesis (DO) has found extensive use in oral and maxillofacial surgery for correcting maxillofacial deformities due to its numerous advantages. However, comprehensive scientific and visual analyses of this field on a global scale are rare. Therefore, this study aims to provide a summary of the global trends and current status of DO in oral and maxillofacial surgery. METHOD: Publications concerning DO in oral and maxillofacial surgery were comprehensively searched and selected from the Web of Science Core Collection(WOSCC) database. We evaluated the annual contributions from institutions, journals, countries, and authors using bibliometric analysis software. RESULTS: A total of 541 publications were included in this study. The USA played a predominant role in this field, leading in both publication volume and international collaboration. Harvard University and the University of Hong Kong secured the top position in total publications, while the University of Texas System topped the list in total citations within this field. The Journal of Oral and Maxillofacial Surgery emerged as the primary contributing journal, and Cheung LX emerged as the primary contributing author in the field of distraction osteogenesis (DO) in oral and maxillofacial surgery. Keywords such as 'orthognathic surgery,' 'reconstruction,' and 'osteogenesis' are anticipated to be prominent topics in future research. CONCLUSION: Between 1995 and 2023, there has been rapid growth in the total number of publications within the field of distraction osteogenesis (DO) in oral and maxillofacial surgery. The USA stands out as the predominant country in this field. Surgeries, orthognathic surgery, and osteogenesis have emerged as prominent topics. The findings of our study offer valuable insights for scholars seeking to identify research hotspots and chart the developmental direction of DO in oral and maxillofacial surgery.

Maxillofacial Surgery in Ukraine During a War: Challenges and Perspectives-A National Survey.

INTRODUCTION: The invasion of Ukraine by Russian troops on February 24, 2022, and the beginning of the full-scale war had huge humanitarian consequences. The major challenges facing the Ukrainian health care system included the disruption of medical infrastructure and logistics, the termination of the supply of expendable materials, significant migration, and a dramatic increase in high-velocity blast and gunshot injuries among combatants and civilians.The aim of the present study was to analyze the challenges and solutions in patient care faced by the Ukrainian system of maxillofacial surgery during the war in different regions of the country. MATERIALS AND METHODS: A cross-sectional study was designed and implemented as an online survey to collect national data concerning maxillofacial surgeons' experiences and professional activities. The study was initiated and supported by Bogomolets National Medical University (Kyiv, Ukraine), the Ukrainian representative of AO CMF (Arbeitsgemeinschaft für Osteosynthesefragen Craniomaxillofacial Surgery) and the University of Helsinki (Finland).The questionnaire was developed by specialists in maxillofacial surgery and sociologists and contained 65 close-ended questions. Surgeons who had not worked in this specialty in inpatient departments of hospitals since at least the beginning of the full-scale war were excluded from the study. We received and analyzed 97 responses that met the abovementioned criteria. The geography of respondents covered all the regions and the main cities of Ukraine, expect for the occupied territories. RESULTS: After a year of warfare, the percentage of surgeons who treated patients with blast and gunshot injuries increased from 43.4% to 86.6%. This percentage was higher in military hospitals and in regions located in the vicinity of the front line. We found that, during the war, 78.6% of respondents performed osteosynthesis in cases of high-velocity multifragmented facial bone fractures (in such cases, 58.3% of them strictly followed AO CMF recommendations, while 41.7% performed the fixation based on available hardware, existing technical possibilities and their own preferences). We found that 70.2% of respondents had the opportunity to apply Computer-Aided Design/Computer-Aided Manufacture technology and patient-specific implants for the treatment of gunshot injuries, 38.1% reported that their hospitals were able to perform microsurgical reconstructions for facial defects, 79.4% of respondents reported that their departments received humanitarian aid and support from volunteer organizations (either Ukrainian or international), which significantly facilitated the treatment process. CONCLUSIONS: According to this nationwide survey of Ukrainian maxillofacial surgeons during a year of the full-scale war, 86.6% of respondents were involved in the treatment of gunshot and ballistic injuries in civilians and combatants. The main problems reported by the respondents were (1) a lack of experience and knowledge related to the treatment of severe wounds, especially by secondary reconstruction, and (2) a deficit of resources (equipment, materials, and medications) under conditions of disrupted logistics and changes in the numbers and nosological distribution of patients. There were the opportunity to transfer the patients to European clinics (29.9%), online consultations (45.4%), collaboration with foreign surgeons who come to Ukraine asvolunteers (32%).

Manejo odontológico del paciente en tratamiento de anticoagulante oral sometido a cirugía oral: una revisión narrativa / Stomatological management of anticoagulated patients undergoing oral surgery: a narrative review

Resumen Los pacientes que se encuentran bajo tratamiento de anticoagulantes orales, presentan alteraciones en distintas etapas de la hemostasia, lo que conlleva a tener implicancias y consideraciones médico/quirúrgicas durante su atención. En la actualidad, no existe un consenso en relación con el manejo odontológico de estos pacientes que serán sometidos a procedimientos quirúrgicos, llevando a protocolos clínicos que siguen diversas posturas, como la de disminuir la ingesta farmacológica del anticoagulante, sustituir con heparina y la de mantener el tratamiento bajo control. Objetivo Establecer el manejo estomatológico del paciente que se encuentra en tratamiento de anticoagulante oral mediante una revisión profunda de la literatura Materiales y método Se realizó una búsqueda de revisión bibliográfica manualmente de artículos indexados a las bases de datos de PUBMED y EBSCO que correspondiesen a las palabras "cirugía bucal", "anticoagulantes", "atención dental" y "hemorragia oral". En cuanto a los criterios de inclusión, se consideraron revisiones bibliográficas, estudios observacionales, ensayos clínicos, guías, revisiones sistemáticas y metaanálisis publicados entre noviembre de 2005 y 2022, en idiomas inglés o español. Conclusiones Existen múltiples protocolos para la atención del paciente anticoagulado que será sometido bajo procedimiento de cirugía oral menor. Es importante considerar el anticoagulante utilizado, motivo, control de este, el procedimiento a realizar en el paciente y medidas hemostáticas tanto intra como postoperatorias por realizar, tras analizar lo anterior, se advierte que disminuir la ingesta del fármaco para realizar el procedimiento, puede ser más perjudicial al paciente como al clínico, por lo tanto se sugiere mantener el tratamiento antitrombótico y realizar un correcto manejo médico/quirúrgico.

Abstract Patients undertaking oral anticoagulant treatment may experience alterations in different stages of hemostasis, which lead to medical/surgical implications and considerations during their care. Currently, there is no consensus regarding the dental management of these patients, as they go through surgical procedures. This leads to clinical protocols that follow numerous approaches, such as reducing the pharmacological intake of the anticoagulant, replacing it with heparin, and maintaining the controlled treatment. Objective: To establish the stomatological management of the patient undergoing oral anticoagulant treatment through an in depth review of the literature. Materials and Method: A manual bibliographic review search of articles indexed to the PUBMED and EBSCO databases corresponding to the words "oral surgery", "oral bleeding", "anticoagulants" and "dental management" was performed. Regarding the inclusion criteria: bibliographic reviews, observational studies, clinical trials, guidelines, systematic reviews, and meta-analyses published between November 2005 and 2022, in English or Spanish, were considered. Conclusion: There are multiple protocols for the care of the anticoagulated patient who will undergo a minor oral surgery procedure. It is important to reflect on the anticoagulant used, the reason for it, its supervision, the surgical procedure that will be undertaken by the patient, and both intraoperative and postoperative hemostatic measures to be implemented. After analyzing the above, it is noted that reducing the intake of the drug to perform the surgical procedure may be harmful to the patient and to the clinician, therefore it is suggested to maintain the antithrombotic treatment and carry out a correct medical/surgical management.

Use of platelet concentrates in oral surgery of patients with osteonecrosis: a scoping review.

The objective of this study was to map, through a scoping review, the evidence available in the literature on the use of platelet concentrates in compromised patients undergoing oral surgeries. Searches were performed in electronic databases for clinical studies with compromised patients undergoing oral surgery who used platelet concentrates. Only studies published in English were included. Two independent researchers carried out the selection of studies. The study design and objective, surgical procedure and platelet concentrate used, systemic involvement, analyzed outcome, and main results were extracted. A descriptive analysis of the data was performed. Twenty-two studies met the eligibility criteria and were included. Case series was the most frequent study design among the included studies (41.0%). In terms of systemic disability, 19 studies reported patients with cancer and related to surgical treatment 16 studies reported patients underwent treatment for osteonecrosis related to the use of the drug. The most used platelet concentrate was pure platelet-rich fibrin (P-PRF). In general, most studies recommend the use of platelet concentrates. Thus, the results of this study suggest that the evidence related to the use of platelet concentrates in compromised patients when undergoing oral surgeries is still initial. Also, most studies assessed the use of platelet concentrates in patients with osteonecrosis.

A survey regarding the organizational aspects and quality systems of in-house 3D printing in oral and maxillofacial surgery in Germany.

PURPOSE: The aim of the study was to get a cross-sectional overview of the current status of specific organizational procedures, quality control systems, and standard operating procedures for the use of three-dimensional (3D) printing to assist in-house workflow using additive manufacturing in oral and maxillofacial surgery (OMFS) in Germany. METHODS: An online questionnaire including dynamic components containing 16-29 questions regarding specific organizational aspects, process workflows, quality controls, documentation, and the respective backgrounds in 3D printing was sent to OMF surgeons in university and non-university hospitals as well as private practices with and without inpatient treatment facilities. Participants were recruited from a former study population regarding 3D printing; all participants owned a 3D printer and were registered with the German Association of Oral and Maxillofacial Surgery. RESULTS: Sixty-seven participants answered the questionnaires. Of those, 20 participants ran a 3D printer in-unit. Quality assurance measures were performed by 13 participants and underlying processes by 8 participants, respectively. Standard operating procedures regarding computer-aided design and manufacturing, post-processing, use, or storage of printed goods were non-existent in most printing units. Data segmentation as well as computer-aided design and manufacturing were conducted by a medical doctor in most cases (n = 19, n = 18, n = 8, respectively). Most participants (n = 8) stated that "medical device regulations did not have any influence yet, but an adaptation of the processes is planned for the future." CONCLUSION: The findings demonstrated significant differences in 3D printing management in OMFS, especially concerning process workflows, quality control, and documentation. Considering the ever-increasing regulations for medical devices, there might be a necessity for standardized 3D printing recommendations and regulations in OMFS.

Biología del tejido óseo y cambios morfológicos en su regeneración / Biology of bone tissue and morphological changes in its regeneration

Introducción: La regeneración ósea permite la reintegración y conformación de tejidos posteriores a la extracción o corrección de un defecto óseo. Es considerada una técnica de estimulación para la formación de hueso nuevo, donde se favorece la construcción y la preservación del coágulo con el fin de evitar la infiltración en la zona de reparación, de componentes celulares (células epiteliales y conjuntivas). Objetivos: Describir los cambios a nivel morfológico durante el proceso de regeneración ósea y mencionar distintas técnicas de preservación ósea y los factores necesarios para su realización. Presentación de caso: Paciente femenina con periodontitis apical asintomática en órganos dentarios 34 y 37, que se sometió a preservación alveolar mediante la práctica de exodoncia atraumática y regeneración ósea con xenoinjerto, colocación de membrana colágeno e implante posextractivo inmediato. Principales comentarios: La colocación inmediata de implantes posexodoncia permite una buena preservación del alveolo, siempre y cuando las condiciones clínicas del paciente así lo permitan, por ejemplo, la ausencia de procesos infecciosos agudizados como en el presente caso. La regeneración ósea, en el defecto producido por el proceso inflamatorio periapical, implicó una correcta detoxificación de la zona a través del curetaje y la aplicación de antibióticos. La respuesta inmunológica exagerada ante injertos óseos no es frecuente; sin embargo, en este caso llevó a una pérdida parcial del sustituto óseo sin comprometer el pronóstico de los implantes(AU)

Introduction: Bone regeneration allows the reintegration and conformation of tissues after the extraction or correction of a bone defect. It is considered a stimulation technique for the formation of new bone, where the construction and preservation of the clot is favored in order to avoid infiltration in the repair area of cellular components (epithelial and conjunctiva cells). Objective: Describe the changes at the morphological level during the bone regeneration process and mention different bone preservation techniques and the necessary factors for their implementation. Case presentation: Female patient with asymptomatic apical periodontitis in dental organs 34 and 37, who underwent alveolar preservation through the practice of atraumatic exodontics and bone regeneration with xenograft, collagen membrane placement and immediate post-extraction implant. Main comments: The immediate placement of post-exodontic implants allows a good preservation of the alveolus, as long as the clinical conditions of the patient allow it, for example, the absence of exacerbated infectious processes as in the present case. Bone regeneration, in the defect produced by the periapical inflammatory process, involved a correct detoxification of the area through curettage and the application of antibiotics. Exaggerated immune response to bone grafts is not common; however, in this case it led to a partial loss of bone substitute without compromising the prognosis of the implants(AU)

Principios y recursos clásicos y modernos: combinación en el manejo de fracturas tipo Le Fort / Classical and modern principles and resources: their combination in the management of Le Fort fractures

Introducción: Las lesiones traumáticas maxilofaciales son un problema de salud importante en todo el mundo. Suponen una carga para la salud pública. Objetivo: Reflexionar sobre la necesidad de combinar en el contexto cubano principios y recursos clásicos y modernos en el manejo de fracturas tipo Le Fort. Comentarios principales: El tratamiento de las fracturas faciales ha evolucionado mucho a lo largo de los años. Tradicionalmente, el alambre de acero inoxidable se utilizaba para la osteosíntesis en cirugía maxilofacial hasta la aparición de las miniplacas. Los sistemas de osteosíntesis de titanio son actualmente los de elección en cirugía maxilofacial. A pesar de sus ventajas indiscutibles, en los países en desarrollo ocasionalmente no se cuenta con todo el equipamiento necesario para su empleo. Consideraciones globales: El manejo del trauma maxilofacial se centra en la reobtención de la forma y la función original de la región afectada. Sin vulnerar los principios teóricos de manejo de fracturas tipo Le Fort, se impone de los profesionales cubanos la búsqueda de soluciones en concordancia con la disponibilidad de recursos. La unión de técnicas clásicas y recursos modernos como las suspensiones craneofaciales alámbricas, los arcos barra y los tornillos de fijación maxilomandibular puede ser una alternativa terapéutica confiable(AU)

Introduction: Traumatic maxillofacial lesions are an important global health problem, as well as a public health burden. Objective: Reflect on the need to combine classical and modern principles and resources in the management of Le Fort fractures in the Cuban context. Main remarks: Treatment of facial fractures has evolved considerably through the years. Before the appearance of miniplates, stainless steel wire was used for osteosynthesis in maxillofacial surgery. Titanium osteosynthesis systems are currently the systems of choice in maxillofacial surgery. Despite their undeniable advantages, developing countries occasionally do not have all the equipment required for their use. General considerations: Management of maxillofacial trauma is aimed at recovering the original form and function of the affected area. Without disregarding the theoretical principles of the management of Le Fort fractures, Cuban professionals should search for solutions in keeping with the resources available. The combination of classical techniques and modern resources, such as wired craniofacial suspensions, bar arches and maxillomandibular fixation screws, may be a reliable therapeutic alternative(AU)

Reconstrucción con colgajo de músculo temporal en defecto del tercio medio de la región facial. Nuestra experiencia en un hospital de mediana complejidad / TEMPORALIS MUSCLE FLAP RECONSTRUCTION IN FACIAL REGION DEFECTS. OUR EXPERIENCE IN MEDIUM COMPLEXITY HOSPITAL

Introducción: El colgajo pediculado realizado con músculo temporal es una opción terapéutica válida para la reconstrucción de defectos de la región facial posterior a una resección quirúrgica, es una alternativa aceptable a los colgajos libres cuando estos no pueden ser utilizados ya sea por el performance status o patología de base de los pacientes a tratar o por no contar con cirujano microvascular. Objetivo: Describir nuestra experiencia en el uso de este colgajo para la reconstrucción de 7 pacientes con defectos de órbita, paladar y mucosa yugal tras la cirugía ablativa de diversas patologías. Materiales y métodos: Revisión retrospectiva de los pacientes del Servicio de Cirugía General del Hospital José Ramon Vidal, Corrientes-Argentina operados en el periodo comprendido desde enero del 2019 hasta enero del 2021.En este lapso, 7 pacientes fueron sometidos a cirugía reconstructiva inmediata con colgajo de músculo temporal en defectos del tercio medio de la región facial. Resultados: Un total de siete pacientes, (4 masculino- 3 femenino), sometidos a cirugía ablativa por presentar patología maligna (6) y patología benigna (1), con una edad media de 60 años. Dos colgajos se utilizaron para defectos de región orbitaria y partes blandas, seis para defectos en la cavidadoral­ en un paciente se emplearon los 2 músculos temporales-. El colgajo fue exitoso en todos los casos, se presentaron complicaciones menores como: dolor postoperatorio, hematoma, trismus, depresión de la zona dadora. Se obtuvo márgenes libres en el total de los procedimientos. Discusión: La cirugía reconstructiva con colgajo pediculado de musculo temporal es una excelente alternativa de colgajo regional con buenos resultados, posee alta tasa de éxito justificada por su buena vascularización. Además, la proximidad del músculo temporal con la región maxilofacial y su inserción contribuyen a obtener un arco de rotación hasta 180° sin comprometersu vitalidad. Es útil para la reconstrucción en un acto quirúrgico, acortando el tiempo intraoperatorio y sin cambios posicionales. Conclusiones: El colgajo de músculo temporal resulta una opción válida a los colgajos libres osteo-mio-cutáneos para defectos mixtos (óseos y de partes blandas) del tercio medio facial luego de la cirugía ablativa, cuando estos últimos no pueden ser implementados teniendo en cuenta varios aspectos como performance estatus de los pacientes, patología de base y necesidad de contar con un cirujano microvascular

Introduction: temporalis muscle vascularized flaps is a valid therapeutic option for reconstruction of defects in facial region after surgical resections. It is an acceptable alternative to free transfer flaps when these cannot be used because of the patient's performance state and base pathologies. Or because of the lack of a microvascular surgeon. Objectives: To describe on experience applying this kind of flaps for the reconstruction or 7 patients, with defects in palate orbit and yugal mucose after resective surgeries for various pathologies. Materials and methods: retrospective revision of patients in the general department, of Jose R Vidal Hospital (Corrientes - Argentina) into underwent surgery during the period between January 2019 ad January 2021. A total of 7 patients underwent immediate reconstructive surgery using a temporalis muscle flap. Results: 7 patients (4 males y 3 female) underwent resective surgery for different malignant (6) and benign (1) with a median age of 60. Two flaps were used for defects of the orbitary region and soft tissue, six for defects of the oral cavity (in one patient both temporalis muscle were used. Te procedure was successful in all cases, and minor complication were present, (post operatory pain, hematoma, trismus, excavation of the donor region) all procedures resulted un surgical margins of lesion of malignancy. Discussion: reconstructive surgery using a vascularized flap of temporalis muscle is an excellent alternative for regional flaps with good results and a high success justified because of its a good irrigation. Besides the proximity between temporalis muscle and the maxillofacial region, possibilities a flap rotation of up to 180 grades without compromising its vitality it is also useful for reconstruction in a single surgery shortening intra-operatory time while avoiding repositioning of the patients during the procedure. Conclusions: Temporalis muscle flaps are valid option to free osteo- mayo- cutaneal flaps for mixed defects (involving bone and soft tissue) of the medium third of facial region after resective surgeries when the latter cannot be carried and because of various aspects little performance status base pathologies and lack of microvascular margin.

Current Concepts in Head and Neck Surgery.

This article is intended to "brush up" on the literature updates for the management of head and neck surgeries, particularly mandibulectomy and maxillectomy. Few new techniques have been described in the past decade in dental and oral oncological surgery. A tendency of developing more aggressive surgical strategies to treat complex oral tumors is evident from the recent veterinary literature and the emerging novel techniques for bone regeneration of maxillofacial defects. In addition, this article also focuses on the basic oral surgical oncology principles, an important part of any maxillofacial surgery.

Application of dental pulp stem cells in oral maxillofacial tissue engineering.

In the maxillofacial area, soft and hard tissue abnormalities are caused by trauma, tumors, infection, and other causes that expose the maxillofacial region to the surface of the human body. Patients' normal physiological function and appearance are interfered with, and their mental health is adversely impacted, reducing their overall life quality. The pursuit of appropriate medical treatments to correct these abnormalities is thus vital. Autologous stem cell regeneration technology mainly focused on tissues has lately emerged as a significant problem in the medical community. Because of the capacity of dental pulp stem cells (DPSCs) to self-renew, the use of DPSCs from the human pulp tissues of deciduous teeth or permanent teeth has gained popularity among scientists as a stem cell-based therapy option. Aside from that, they are simple to extract and have minimal immunogenicity. As a result, bone tissue engineering may be a critical component in treating maxillofacial and periodontal bone abnormalities. DPSCs activity in maxillofacial and periodontal tissue-engineered bone tissue was investigated in this research.

Granuloma piógeno oral. Serie de casos / Oral pyogenic granuloma. Case series

RESUMEN El granuloma piógeno es una lesión que se manifiesta en la piel y en la cavidad oral, relacionado con diversas causas, como irritación crónica, trauma y cambios hormonales. Clínicamente se muestra como una lesión hiperplásica altamente vascularizada, con un tamaño de 1-3 cm, de base pedunculada o sésil y de crecimiento lento. Predomina en el sexo femenino y tiende a aparecer, sobre todo, en la encía, con muy pocos casos reportados en zonas edentes, motivo por el que se realizó el reporte de tres casos de granuloma piógeno oral en pacientes femeninas, comprendidas entre 30 y 40 años de edad. Se presentaron lesiones que diferían en cuanto a su localización y apariencia clínica (AU).

ABSTRACT Pyogenic granuloma is a lesion that arises in the skin and oral cavity, related to various causes, such as chronic irritation, trauma and hormonal changes. Clinically it looks like a highly vascularized hyperplastic lesion, sized 1-3 cm, with a pedunculated or sessile base and slow growing. It predominates in the female sex and tends to appear, above all, in the gum, with very few cases reported in edentulous areas; that is why the authors reported three cases of oral pyogenic granuloma in female patients, aged between 30 and 40 years. The lesions differed in their location and clinical appearance (AU).

Exodontia atraumática associada a elásticos ortodônticos em pacientes submetidos ao tratamento oncológico radioterápico: revisão de literatura / Atraumatic tooth extraction associated with orthodontic elastics in patients submitted to radiotherapy oncological treatment: literature review

Introdução: O câncer está atualmente entre as cinco causas mais frequentes de mortes no planeta, tudo isso devido a hábitos deletérios ou predisposição genética. O câncer de boca ocupa uma posição de destaque nesse panorama e necessita de uma atenção odontológica especial, devido à associação da perda dentária com o tratamento oncológico. Objetivo: O objetivo deste trabalho foi fazer uma análise biológica dos processos desencadeados pelo tratamento radioterápico e apresentar um método alternativo de exodontia seguro para os pacientes oncológicos. Revisão da literatura: O tratamento oncológico radioterápico desencadeia uma série de complicações bucais que eventualmente exigirão a exodontia, entre eles: osteorradionecrose, hipossalivação, cáries, doença periodontal, entre outros. Discussão: A exodontia com elásticos ortodônticos consiste no envolvimento dentário na altura cervical com os elásticos causando uma esfoliação lenta, gradual e mais atraumática possível da raiz, esse processo leva em torno de 5 a 8 semanas. Esta técnica associada a um bom pós-operatório garantirá uma cicatrização adequada aumentando significativamente as chances de um prognóstico positivo. Conclusão: Os resultados dessa associação de técnicas são seguros e diminuem os riscos de complicações pós-operatória, garantindo assim, uma recuperação sem maiores problemas ao paciente.

Introduction: Cancer is currently among the five most common causes of death worldwide, resulting from harmful habits or genetic predisposition. Oral cancer plays a major role in this scenario and requires special dental care due to the association of tooth loss with cancer treatment. Aim: This study aimed at the biolo-gical analysis of the processes triggered by radiotherapy treatment and presentation of an alternative method for safe tooth extraction in cancer patients. Literature review: Cancer radiotherapy treatment triggers a series of oral complications that will eventually require tooth extraction, for example, osteoradionecrosis, hyposaliva-tion, caries, and periodontal disease. Discussion: Tooth extraction with orthodontic elastics involves the tooth at the cervical height with elastics allowing a slow, gradual, and less traumatic exfoliation of the root; this process takes approximately 5 to 8 weeks. This technique is as-sociated with a good postoperative recoveryand ensures adequate healing, significantly increasing the likelihood of a positive prognosis. Conclusion: These techniques are safe and decrease the risk of postoperative complications, thus ensuring recovery without major problems for the patient.