Crafting Stable Antibiotic Nanoparticles via Complex Coacervation of Colistin with Block Copolymers.

To combat the ever-growing increase of multidrug-resistant (MDR) bacteria, action must be taken in the development of antibiotic formulations. Colistin, an effective antibiotic, was found to be nephrotoxic and neurotoxic, consequently leading to a ban on its use in the 1980s. A decade later, colistin use was revived and nowadays used as a last-resort treatment against Gram-negative bacterial infections, although highly regulated. If cytotoxicity issues can be resolved, colistin could be an effective option to combat MDR bacteria. Herein, we investigate the complexation of colistin with poly(ethylene oxide)-b-poly(methacrylic acid) (PEO-b-PMAA) block copolymers to form complex coacervate core micelles (C3Ms) to ultimately improve colistin use in therapeutics while maintaining its effectiveness. We show that well-defined and stable micelles can be formed in which the cationic colistin and anionic PMAA form the core while PEO forms a protecting shell. The resulting C3Ms are in a kinetically arrested and stable state, yet they can be made reproducibly using an appropriate experimental protocol. By characterization through dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS), we found that the best C3M formulation, based on long-term stability and complexation efficiency, is at charge-matching conditions. This nanoparticle formulation was compared to noncomplexed colistin on its antimicrobial properties, enzymatic degradation, serum protein binding, and cytotoxicity. The studies indicate that the antimicrobial properties and cytotoxicity of the colistin-C3Ms were maintained while protein binding was limited, and enzymatic degradation decreased after complexation. Since colistin-C3Ms were found to have an equal effectivity but with increased cargo protection, such nanoparticles are promising components for the antibiotic formulation toolbox.

Modification of the Antibiotic, Colistin, with Dextrin Causes Enhanced Cytotoxicity and Triggers Apoptosis in Myeloid Leukemia.

Introduction: Acute myeloid leukemia (AML) remains difficult to treat due to its heterogeneity in molecular landscape, epigenetics and cell signaling alterations. Precision medicine is a major goal in AML therapy towards developing agents that can be used to treat patients with different 'subtypes' in combination with current chemotherapies. We have previously developed dextrin-colistin conjugates to combat the rise in multi-drug resistant bacterial infections and overcome dose-limiting nephrotoxicity. Recent evidence of colistin's anticancer activity, mediated through inhibition of intracellular lysine-specific histone demethylase 1 (LSD1/KDM1A), suggests that dextrin-colistin conjugates could be used to treat cancer cells, including AML. This study aimed to evaluate whether dextrin conjugation (which reduces in vivo toxicity and prolongs plasma half-life) could enhance colistin's cytotoxic effects in myeloid leukemia cell lines and compare the intracellular uptake and localization of the free and conjugated antibiotic. Results: Our results identified a conjugate (containing 8000 g/mol dextrin with 1 mol% succinoylation) that caused significantly increased toxicity in myeloid leukemia cells, compared to free colistin. Dextrin conjugation altered the mechanism of cell death by colistin, from necrosis to caspase 3/7-dependent apoptosis. In contrast, conjugation via a reversible ester linker, instead of an amide, had no effect on the mechanism of the colistin-induced cell death. Live cell confocal microscopy of fluorescently labelled compounds showed both free and dextrin-conjugated colistins were endocytosed and co-localized in lysosomes, and increasing the degree of modification by succinoylation of dextrin significantly reduced colistin internalization. Discussion: Whilst clinical translation of dextrin-colistin conjugates for the treatment of AML is unlikely due to the potential to promote antimicrobial resistance (AMR) and the relatively high colistin concentrations required for anticancer activity, the ability to potentiate the effectiveness of an anticancer drug by polymer conjugation, while reducing side effects and improving biodistribution of the drug, is very attractive, and this approach warrants further investigation.

In Vivo and in Vitro activity of colistin-conjugated bimetallic silver-copper oxide nanoparticles against Pandrug-resistant Pseudomonas aeruginosa.

BACKGROUND: Addressing microbial resistance urgently calls for alternative treatment options. This study investigates the impact of a bimetallic formulation containing colistin, silver, and copper oxide on a pandrug-resistant, highly virulent Pseudomonas aeruginosa (P. aeruginosa) isolate from a cancer patient at the National Cancer Institute, Cairo University, Egypt. METHODS: Silver nanoparticles (Ag NPs), copper oxide nanoparticles (CuO NPs), and bimetallic silver-copper oxide nanoparticles (Ag-CuO NPs) were synthesized using gamma rays, combined with colistin (Col), and characterized by various analytical methods. The antimicrobial activity of Col-Ag NPs, Col-CuO NPs, and bimetallic Col-Ag-CuO NPs against P. aeruginosa was evaluated using the agar well diffusion method, and their minimum inhibitory concentration (MIC) was determined using broth microdilution. Virulence factors such as pyocyanin production, swarming motility, and biofilm formation were assessed before and after treatment with bimetallic Col-Ag-CuO NPs. The in vivo efficacy was evaluated using the Galleria mellonella model, and antibacterial mechanism were examined through membrane leakage assay. RESULTS: The optimal synthesis of Ag NPs occurred at a gamma ray dose of 15.0 kGy, with the highest optical density (OD) of 2.4 at 375 nm. Similarly, CuO NPs had an optimal dose of 15.0 kGy, with an OD of 1.5 at 330 nm. Bimetallic Ag-CuO NPs were most potent at 15.0 kGy, yielding an OD of 1.9 at 425 nm. The MIC of colistin was significantly reduced when combined with nanoparticles: 8 µg/mL for colistin alone, 0.046 µg/mL for Col-Ag NPs, and 0.0117 µg/mL for Col-Ag-CuO NPs. Bimetallic Col-Ag-CuO NPs reduced the MIC four-fold compared to Col-Ag NPs. Increasing the sub-inhibitory concentration of bimetallic nanoparticles from 0.29 × 10-2 to 0.58 × 10-2 µg/mL reduced P. aeruginosa swarming by 32-64% and twitching motility by 34-97%. At these concentrations, pyocyanin production decreased by 39-58%, and biofilm formation was inhibited by 33-48%. The nanoparticles were non-toxic to Galleria mellonella, showing 100% survival by day 3, similar to the saline-treated group. CONCLUSIONS: The synthesis of bimetallic Ag-CuO NPs conjugated with colistin presents a promising alternative treatment for combating the challenging P. aeruginosa pathogen in hospital settings. Further research is needed to explore and elucidate the mechanisms underlying the inhibitory effects of colistin-bimetallic Ag-CuO NPs on microbial persistence and dissemination.

Practical synthesis of isoindolines yields potent colistin potentiators for multidrug-resistant Acinetobacter baumannii.

An efficient and practical one-pot synthesis of isoindolines from readily available starting materials was achieved under mild conditions by implementing an isoindole umpolung strategy. A variety of isoindolines were prepared with good to excellent yields. Biological screens of these identified compounds demonstrated that they are potent potentiators of colistin for multi-drug resistant Acinetobacter baumannii.

Development of a Selective and Stable Antimicrobial Peptide.

Antimicrobial peptides (AMPs) are presented as potential scaffolds for antibiotic development due to their desirable qualities including broad-spectrum activity, rapid action, and general lack of susceptibility to current resistance mechanisms. However, they often lose antibacterial activity under physiological conditions and/or display mammalian cell toxicity, which limits their potential use. Identification of AMPs that overcome these barriers will help develop rules for how this antibacterial class can be developed to treat infection. Here we describe the development of our novel synthetic AMP, from discovery through in vivo application. Our evolved AMP, DTr18-dab, has broad-spectrum antibacterial activity and is nonhemolytic. It is active against planktonic bacteria and biofilm, is unaffected by colistin resistance, and importantly is active in both human serum and a Galleria mellonella infection model. Several modifications, including the incorporation of noncanonical amino acids, were used to arrive at this robust sequence. We observed that the impact on antibacterial activity with noncanonical amino acids was dependent on assay conditions and therefore not entirely predictable. Overall, our results demonstrate how a relatively weak lead can be developed into a robust AMP with qualities important for potential therapeutic translation.

Physical compatibility of colistin with analgesics during simulated Y-site administration.

PURPOSE: Special consideration is needed when intravenous drugs are administered simultaneously using a Y-site connector. This study aimed to investigate the physical compatibility of colistin with 6 analgesics at concentrations commonly used in clinical practice. METHODS: A pharmaceutical preparation of colistin was dissolved according to the manufacturer's instructions and diluted to a concentration of 1.5 mg/mL or 0.67 mg/mL (of colistin base). Simulated administration via Y-site infusion set was performed by mixing 5 mL of colistin solution with an equal volume of a solution of one of 6 intravenous analgesics. Infusion solutions of ibuprofen, ketoprofen, metamizole sodium, morphine sulfate, paracetamol, and tramadol hydrochloride were studied. For each analgesic tested, concentrates for injection were diluted with 2 solvents, resulting in 11 different combinations with each concentration of the colistin solution. The mixtures were visually inspected, and their turbidity was measured directly after mixing and at 3 consecutive time points (30, 60, and 120 minutes). Additionally, the pH of the mixtures was measured after 120 minutes and compared with the pH of the analgesic and the colistin solutions. RESULTS: During visual inspection with the unaided eye, no precipitate formation or gas evolution was observed in any of the tested analgesics except for sodium metamizole, where the yellow color of the solutions was observed. For samples containing the mixture of ibuprofen and colistin, the turbidity measurements revealed the presence of turbidity in the studied mixtures. The greatest change in pH relative to the value immediately after preparation was noted for combinations of ketoprofen and morphine sulfate with the tested antibiotic. CONCLUSION: Colistin was found to be incompatible with ibuprofen and metamizole sodium formulations. It should also not be combined with morphine sulfate due to the significant differences in the pH value of the preparations. The colistin 0.67 mg/mL and 1.5 mg/mL infusion solutions were physically compatible with ketoprofen, tramadol hydrochloride, and paracetamol.

A quantitative method for determination of colistin E2 methanesulphonate in human plasma by 15N-labeled colistin E2.

The single-component colistin E2, with superior antibacterial activity and lower toxicity, was being developed as the latest generation of polymyxin drugs. However, colistin E2 has not been tested quantitatively in biological matrices. In this study, based on the quantitative detection of colistin methanesulphonate (CMS) and colistin by Zhao et al., 15N-labeled colistin E2 was used as an internal standard (IS) for a more accurate quantitative detection of CMS E2 in human plasma. A rapid ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) assay method was developed for determination of CMS E2 and colistin E2 in human plasma. After pretreatment of plasma samples by 96-well SPE Supra-Clean Weak Cation Exchange (WCX) plate, the formed colistin E2 was detected and quantified by UHPLC-MS/MS system. All plasma lots were found to be free of interferences with the analyte. The matrix has no effect on the quantitation of the analyte. No significant effect of the carryover was observed. The dilution integrity was demonstrated in plasma samples without the loss of accuracy and precision. The lower limit of quantification (LLOQ) was 0.0300 mg/L for colistin E2 in plasma with accuracy (relative error, 5.1-12.7%) and precision (relative standard deviation, - 5.7-9.3%). Stability of CMS E2 and colistin E2 was demonstrated in biological samples before and during sample treatment, and in the extract. Furthermore, this method was successfully applied to the analysis of plasma samples obtained from Chinese healthy volunteers receiving a single intravenous CMS E2 dose of 5 mg/kg. In conclusion, the detection method was characterized by speed and high accuracy, which laid a solid foundation for the subsequent development of CMS E2 drug.

Enhancement by pyrazolones of colistin efficacy against mcr-1-expressing E. coli: an in silico and in vitro investigation.

Owing to the emergence of antibiotic resistance, the polymyxin colistin has been recently revived to treat acute, multidrug-resistant Gram-negative bacterial infections. Positively charged colistin binds to negatively charged lipids and damages the outer membrane of Gram-negative bacteria. However, the MCR-1 protein, encoded by the mobile colistin resistance (mcr) gene, is involved in bacterial colistin resistance by catalysing phosphoethanolamine (PEA) transfer onto lipid A, neutralising its negative charge, and thereby reducing its interaction with colistin. Our preliminary results showed that treatment with a reference pyrazolone compound significantly reduced colistin minimal inhibitory concentrations in Escherichia coli expressing mcr-1 mediated colistin resistance (Hanpaibool et al. in ACS Omega, 2023). A docking-MD combination was used in an ensemble-based docking approach to identify further pyrazolone compounds as candidate MCR-1 inhibitors. Docking simulations revealed that 13/28 of the pyrazolone compounds tested are predicted to have lower binding free energies than the reference compound. Four of these were chosen for in vitro testing, with the results demonstrating that all the compounds tested could lower colistin MICs in an E. coli strain carrying the mcr-1 gene. Docking of pyrazolones into the MCR-1 active site reveals residues that are implicated in ligand-protein interactions, particularly E246, T285, H395, H466, and H478, which are located in the MCR-1 active site and which participate in interactions with MCR-1 in ≥ 8/10 of the lowest energy complexes. This study establishes pyrazolone-induced colistin susceptibility in E. coli carrying the mcr-1 gene, providing a method for the development of novel treatments against colistin-resistant bacteria.

Structural biology of MCR-1-mediated resistance to polymyxin antibiotics.

Polymyxins, a last resort antibiotic, target the outer membrane of pathogens and are used to address the increasing prevalence of multidrug-resistant Gram-negative bacteria. The plasmid-encoded enzyme MCR-1 confers polymyxin resistance to bacteria by modifying the outer membrane. Transferable resistance to polymyxins is a major concern; therefore, MCR-1 is an important drug target. In this review, we discuss recent structural and mechanistic aspects of MCR-1 function, its variants and homologs, and how they are relevant to polymyxin resistance. Specifically, we discuss work on polymyxin-mediated disruption of the outer and inner membranes, computational studies on the catalytic mechanism of MCR-1, mutagenesis and structural analysis concerning residues important for substrate binding in MCR-1, and finally, advancements in inhibitors targeting MCR-1.

EptA of Riemerella anatipestifer mediates phenotypes involved in colistin resistance and virulence.

Colistin (polymyxin E) is a group of cationic antimicrobial cyclic peptides and is recognized as a last-resort defense against lethal infections with carbapenem-resistant pathogens. In addition to the plasmid-borne mobilized phosphoethanolamine (PEA) transferases, the functional expression of lipid A-modifying enzymes encoded on chromosomes has been attributed to intrinsic bacterial colistin resistance. However, the mechanisms of colistin resistance in Riemerella anatipestifer remain unknown. Herein, the GE296_RS09715 gene-encoded Lipid A PEA transferases (RaEptA) was identified in R. anatipestifer. Genetic and structural analyses revealed that the amino acid sequence of RaEptA shared 26.6%-33.1% similarities with the family of Lipid A PEA transferases (EptA) and MCR-like proteins and have defined 12 residues that contribute to the formation of phosphatidylethanolamine (PE)-recognizable cavities. Comparative analyses of colistin resistance in RA-LZ01 and RA-LZ01ΔRaEptA showed the level of colistin has fallen from 96 µg mL-1 down to 24 ~ 32 µg mL-1 . Site-directed mutagenesis assay of the PE-binding cavity and expression of the mutants reveals that K309-rRaEptA can remodel the surface of Escherichia coli and rendering it resistant to colistin, suggesting this point-mutation of P309K is necessary for EptA-mediated lipid A modification. Moreover, the virulence of RA-LZ01ΔRaEptA was attenuated compared with RA-LZ01 both in vivo and vitro. Taken together, the results represent the RaEptA involved in the colistin resistance and pathogenicity, and the P309K mutation might alter bacterial adaptation and increase the spread of colistin resistance from R. anatipestifer to other gram-negative bacteria. The findings of this study suggest another scenario for the spread of colistin resistance genes and should be considered by a wide audience.

Critical Role of Position 10 Residue in the Polymyxin Antimicrobial Activity.

Polymyxins (polymyxin B and colistin) are lipopeptide antibiotics used as a last-line treatment for life-threatening multidrug-resistant (MDR) Gram-negative bacterial infections. Unfortunately, their clinical use has been affected by dose-limiting toxicity and increasing resistance. Structure-activity (SAR) and structure-toxicity (STR) relationships are paramount for the development of safer polymyxins, albeit very little is known about the role of the conserved position 10 threonine (Thr) residue in the polymyxin core scaffold. Here, we synthesized 30 novel analogues of polymyxin B1 modified explicitly at position 10 and examined the antimicrobial activity against Gram-negative bacteria and in vivo toxicity and performed molecular dynamics simulations with bacterial outer membranes. For the first time, this study revealed the stereochemical requirements and role of the ß-hydroxy side chain in promoting the correctly folded conformation of the polymyxin that drives outer membrane penetration and antibacterial activity. These findings provide essential information for developing safer and more efficacious new-generation polymyxin antibiotics.

Improved Aerosolization Stability of Inhalable Tobramycin Powder Formulation by Co-Spray Drying with Colistin.

PURPOSE: Tobramycin shows synergistic antibacterial activity with colistin and can reduce the toxic effects of colistin. The purpose of this study is to prepare pulmonary powder formulations containing both colistin and tobramycin and to assess their in vitro aerosol performance and storage stability. METHODS: The dry powder formulations were manufactured using a lab-scale spray dryer. In vitro aerosol performance was measured using a Next Generation Impactor. The storage stability of the dry powder formulations was measured at 22°C and two relative humidity levels - 20 and 55%. Colistin composition on the particle surface was measured using X-ray photoelectron spectroscopy. RESULTS: Two combination formulations, with 1:1 and 1:5 molar ratios of colistin and tobramycin, showed fine particle fractions (FPF) of 85%, which was significantly higher than that of the spray dried tobramycin (45%). FPF of the tobramycin formulation increased significantly when stored for four weeks at both 20% and 55% RH. In contrast, FPF values of both combination formulations and spray dried colistin remained stable at both humidity levels. Particle surface of each combination was significantly enriched in colistin molecules; 1:5 combination showed 77% by wt. colistin. CONCLUSIONS: The superior aerosol performance and aerosolization stability of 1:1 and 1:5 combination formulations of colistin and tobramycin could be attributed to enrichment of colistin on the co-spray dried particle surface. The observed powder properties may be the result of a surfactant-like assembly of these colistin molecules during spray drying, thus forming a hydrophobic particle surface.

Hyaluronan-colistin conjugates: Synthesis, characterization, and prospects for medical applications.

The development of nanotechnology-based antibiotic delivery systems (nanoantibiotics) is an important challenge in the effort to combat microbial multidrug resistance. These systems have improved biopharmaceutical characteristics by increasing local bioavailability and reducing systemic toxicity and the number and frequency of drug side effects. Conjugation of low -molecular -weight antibacterial agents with natural polysaccharides is an effective strategy for developing optimal targeted delivery systems with programmed release and reduced cytotoxicity. This study describes the synthesis of conjugates of colistin (CT) and hyaluronic acid (HA) using carbodiimide chemistry to conjugate the amino groups of CT with the carboxyl groups of HA. The obtained polysaccharide carriers had a degree of substitution (DS) with CT molecules of 3-10 %, and the CT content was 129-377 µg/mg. The size of the fabricated particles was 300-600 nm; in addition, there were conjugates in the form of single macromolecules (30-50 nm). The ζ-potential of developed systems was about -20 mV. In vitro release studies at pH 7.4 and pH 5.2 showed slow hydrolysis of amide bonds, with a CT release of 1-5 % after 24 h. The conjugates retained antimicrobial activity depending on the DS: at DS 8 %, the minimum inhibitory concentration (MIC) of the conjugate corresponded to the MIC of free CT. The resulting systems also reduced CT nephrotoxicity by 20-50 %. These new conjugates of CT with HA are promising for the development of nanodrugs for safe and effective antimicrobial therapy.

A new self-immolative colistin prodrug with dual targeting functionalities and reduced toxicity for the treatment of intracellular bacterial infections.

Colistin is a potent antibiotic but its severe side effects including nephrotoxicity and neurotoxicity are the roadblock for their wide use in clinics. To solve this problem, we synthesized a new prodrug, mannose-maltose-colistin conjugate, termed MMCC that can reversibly mask the five amines of colistin that are primarily responsible for the toxicity. The deliberated design of disulfide-based self-immolative linker warranted the reversibly release of the pristine amines of colistin on demand without sacrificing antimicrobial efficacy. Once MMCC was delivered in cells, reducing agents cleaves the disulfide bond and release the pristine amines. The targeting ligands of maltose and mannose were grafted on colistin conjugate for targeting delivery of colistin to bacteria and macrophages, respectively. Taken together, MMCC as a new class of antimicrobial biomaterials, demonstrates its great potential for the treatment of intracellular bacterial infections.

Deep Mutational Scanning Reveals the Active-Site Sequence Requirements for the Colistin Antibiotic Resistance Enzyme MCR-1.

Colistin (polymyxin E) and polymyxin B have been used as last-resort agents for treating infections caused by multidrug-resistant Gram-negative bacteria. However, their efficacy has been challenged by the emergence of the mobile colistin resistance gene mcr-1, which encodes a transmembrane phosphoethanolamine (PEA) transferase enzyme, MCR-1. The enzyme catalyzes the transfer of the cationic PEA moiety of phosphatidylethanolamine (PE) to lipid A, thereby neutralizing the negative charge of lipid A and blocking the binding of positively charged polymyxins. This study aims to facilitate understanding of the mechanism of the MCR-1 enzyme by investigating its active-site sequence requirements. For this purpose, 23 active-site residues of MCR-1 protein were randomized by constructing single-codon randomization libraries. The libraries were individually selected for supporting Escherichia coli cell growth in the presence of colistin or polymyxin B. Deep sequencing of the polymyxin-resistant clones revealed that wild-type residues predominates at 17 active-site residue positions, indicating these residues play critical roles in MCR-1 function. These residues include Zn2+-chelating residues as well as residues that may form a hydrogen bond network with the PEA moiety or make hydrophobic interactions with the acyl chains of PE. Any mutations at these residues significantly decrease polymyxin resistance levels and the PEA transferase activity of the MCR-1 enzyme. Therefore, deep sequencing of the randomization libraries of MCR-1 enzyme identifies active-site residues that are essential for its polymyxin resistance function. Thus, these residues may be utilized as targets to develop inhibitors to circumvent MCR-1-mediated polymyxin resistance. IMPORTANCE Polymyxin antibiotics are used as last-line antibiotics in treating infections caused by multidrug-resistant pathogens. However, widespread use of polymyxins has led to the emergence of resistance. Although multiple mechanisms for resistance exist, that due to mcr-1 is a particular concern, as it can be readily transferred among bacterial pathogens. The mcr-1 gene encodes a transmembrane phosphoethanolamine (PEA) transferase that modifies lipid A to block the binding of polymyxin antibiotics. We utilized random mutagenesis coupled with next-generation sequencing to determine the amino acid sequence requirements of 23 residues in and near the active site of MCR-1. We show that the enzyme has stringent sequence requirements, with 75% of the residues examined being essential for function. Coupled with the finding that these residues are largely conserved among PEA enzymes, the results suggest inhibitors that bind near these sites will broadly inhibit MCR-1 and other enzymes of this class.

Evaluation of ceftazidime/avibactam alone and in combination with amikacin, colistin and tigecycline against Klebsiella pneumoniae carbapenemase-producing K. pneumoniae by in vitro time-kill experiment.

Klebsiella pneumoniae carbapenemase-producing K. pneumoniae (KPC-Kp) poses a major threat to human health worldwide. Combination therapies of antibiotics with different mechanisms have been recommended in literatures. This study assessed in vitro antibacterial activities and synergistic activities of ceftazidime/avibactam alone and in combinations against KPC-Kp. In total, 70 isolates from 2 hospitals in Beijing were examined in our study. By using the agar dilution method and broth dilution method, we determined the minimum inhibitory concentration (MIC) of candidate antibiotics. Ceftazidime/avibactam demonstrated promising susceptibility against KPC-Kp (97.14%). Synergistic activities testing was achieved by checkerboard method and found ceftazidime/avibactam-amikacin displayed synergism in 90% isolates. Ceftazidime/avibactam-colistin displayed partial synergistic in 43% isolates, and ceftazidime/avibactam-tigecycline displayed indifference in 67% isolates. In time-kill assays, antibiotics at 1-fold MIC were mixed with bacteria at 1 × 105 CFU/ml and Mueller-Hinton broth (MHB). Combinations of ceftazidime/avibactam with amikacin and tigecycline displayed better antibacterial effects than single drug. Ceftazidime/avibactam-colistin combination did not exhibit better effect than single drug. In KPC-Kp infections, susceptibility testing suggested that ceftazidime/avibactam may be considered as first-line choice. However, monotherapy is often inadequate in infection management. Thus, our study revealed that combination therapy including ceftazidime/avibactam colistin and ceftazidime/avibactam tigecycline may benefit than monotherapy in KPC-Kp treatment. Further pharmacokinetic/pharmacodynamic and mutant prevention concentration studies should be performed to optimize multidrug-regimens.

Protein-Based Films as Antifouling and Drug-Eluting Antimicrobial Coatings for Medical Implants.

Nosocomial infections, caused by bacterial contamination of medical devices and implants, are a serious healthcare concern. We demonstrate here, the use of fluorous-cured protein nanofilm coatings for generating antimicrobial surfaces. In this approach, bacteria-repelling films are created by heat-curing proteins in fluorous media. These films are then loaded with antibiotics, with release controlled via electrostatic interactions between therapeutic and protein film building blocks to provide bactericidal surfaces. This film fabrication process is additive-free, biocompatible, biodegradable, and can be used to provide antimicrobial coatings for both three-dimensional (2D) and 3D objects for use in indwelling devices.

Hyaluronan/colistin polyelectrolyte complexes: Promising antiinfective drug delivery systems.

Nanotechnology-based modification of known antimicrobial agents is a rational and straightforward way to improve their safety and effectiveness. The aim of this study was to develop colistin (CT)-loaded polymeric carriers based on hyaluronic acid (HA) for potential application as antimicrobial agents against multi-resistant gram-negative microorganisms (including ESKAPE pathogens). CT-containing particles were obtained via a polyelectrolyte interaction between protonated CT amino groups and HA carboxyl groups (the CT-HA complex formation constant [logKCT-HA] was about 5.0). The resulting polyelectrolyte complexes had a size of 210-250 nm and a negative charge (ζ-potential -19 mV), with encapsulation and loading efficiencies of 100% and 20%, respectively. The developed CT delivery systems were characterized by modified release (45% and 85% of CT released in 15 and 60 min, respectively) compared to pure CT (100% CT released in 15 min). In vitro tests showed that the encapsulation of CT in polymer particles did not reduce its pharmacological activity; the minimum inhibitory concentrations of both encapsulated CT and pure CT were 1 µg/mL (against Pseudomonas aeruginosa).

Colistin Resistance in Aeromonas spp.

The increase in the use of antimicrobials such as colistin for the treatment of infectious diseases has led to the appearance of Aeromonas strains resistant to this drug. However, resistance to colistin not only occurs in the clinical area but has also been determined in Aeromonas isolates from the environment or animals, which has been determined by the detection of mcr genes that confer a resistance mechanism to colistin. The variants mcr-1, mcr-3, and mcr-5 have been detected in the genus Aeromonas in animal, environmental, and human fluids samples. In this article, an overview of the resistance to colistin in Aeromonas is shown, as well as the generalities of this molecule and the recommended methods to determine colistin resistance to be used in some of the genus Aeromonas.

Comparison of colistin-induced nephrotoxicity between two different formulations of colistin in critically ill patients: a retrospective cohort study.

BACKGROUND: Colistin is widely used in the treatment of nosocomial infections caused by carbapenem-resistant gram-negative bacilli (CR-GNB). Colistin-induced nephrotoxicity is one of the major adverse reactions during colistin treatment. Comparisons of colistin-induced nephrotoxicity between different formulations of colistin are rarely reported. METHODS: In this retrospective cohort study, we enrolled intensive care unit-admitted patients if they had culture isolates of CR-GNB and underwent intravenous treatment with colistin. The occurrence of acute kidney injury (AKI) during intravenous treatment with colistin was recorded. The occurrence of colistin-induced nephrotoxicity was compared between two formulations of colistin, Locolin®, and Colimycin®. Treatment outcomes associated with the occurrence of colistin-induced nephrotoxicity were also investigated. RESULTS: Among 195 patients, 95 who were treated with Locolin® and 100 who were treated with Colimycin® were included for analysis. Patients treated with Locolin® had a higher rate of occurrence of stage 2 (46.3% vs. 32%, p = 0.040) and stage 3 (29.5% vs. 13%, p = 0.005) AKI than did those treated with Colimycin®. In multivariate analysis, the presence of septic shock (adjusted odds ratio [aOR] 2.17, 95% confidence interval [CI] 1.10-4.26) and inappropriate colistin dosage (aOR 2.52, 95% CI 1.00-6.33) were clinical factors associated with colistin-induced nephrotoxicity. Treatment with Colimycin® was an independent factor associated with a lower risk of colistin-induced nephrotoxicity (aOR 0.37, 95% CI 0.18-0.77). The mortality rate was comparable between patients with and without colistin-induced nephrotoxicity. CONCLUSIONS: The risk of colistin-induced nephrotoxicity significantly varied in different formulations of colistin in critically ill patients. Colistin-induced nephrotoxicity was not associated with increased mortality rate.