Periodontal Evaluation for a New Alkasite Restorative Material in Noncarious Cervical Lesions: A Randomized-Controlled Clinical Trial.

OBJECTIVES: This study aims to evaluate the periodontal condition adjacent to Cention N (CN) restorations applied for noncarious cervical lesions (NCCL) compared with resin-modified glass ionomer cement (RM-GIC) restorations in terms of plaque accumulation, attachment loss, and gingival inflammation. MATERIALS AND METHODS: This is a double-blind split-mouth three-armed randomized-controlled clinical trial. The study arms are RM-GIC (FUJI II LC), CN + adhesive system, and CN + retentive groove. The study included 25 restorations per arm. Follow-ups were performed at 1 week, 3, 6, and 9 months after the application of the restorations. The periodontal condition was evaluated using the plaque index (PI), the bleeding on probing index (BOP), and the probing depth (PD). Appropriate tests were used to perform statistical analyses (α = 0.05). RESULTS: There was no significant difference between Cention N and RM-GIC regarding the studied variables. However, after the application of the restorations, it was noted that the PI and the PD mean values increased. The average increase after 9 months was 0.06 and 0.34 for PI and PD, respectively, with that of PD being significant. It was also noted that the percentage of positive BOP sites increased at the 1-week follow-up for all study groups and afterward dropped to near preintervention values at the 3-month and later follow-ups. CONCLUSIONS: The two ion-releasing materials Cention N and RM-GIC have a comparable and clinically acceptable effect on the gingival tissue when restoring NCCLs. The combined effect of the gingival retraction cord and the rubber dam clamp on the periodontal tissues might be more important to consider, especially in relation to the probing depth. Future long-term studies are needed to evaluate the effect of Cention N on the subgingival biofilm in comparison with nonion-releasing restorative materials, and subsequently, its effect on gingival inflammation. CLINICAL TRIAL REGISTRATION: This clinical trial was registered in clinicaltrial.gov clinical registry under protocol #NCT05593159.

Digital workflow to assess gingival recession coverage independently of the cemento-enamel Junction: a prospective clinical study using the modified coronally advanced tunnel technique with porcine dermal matrix.

OBJECTIVES: The limited number of studies using digital workflows to measure soft tissue changes depend on the cemento-enamel junction (CEJ), which has been reported to be unreliable. Our primary objective was to apply an advanced digital assessment method, measuring independent from the CEJ to evaluate the modified coronally advanced tunnel technique (MCAT) with a porcine dermal matrix (PDM) for gingival recession coverage. MATERIALS AND METHODS: Patients with type RT1 and RT2 gingival recessions were treated with the MCAT and a PDM. Plaster casts (preoperative and 6 months postoperative) were digitalized. Subsequent stereolithography (STL)-files were imported and superimposed in the open-source software GOM Inspect for computer-based analysis. Recession depth, mean root and complete root coverage (mRC and cRC), mean recession reduction (mRR) and gingival thickness were evaluated. Statistical analysis was performed using mixed linear models. RESULTS: A total of 82 teeth (19 patients) were included in the study. Healing was uneventful in all patients. The mean preoperative recession depth was 1.34 ± 0.92 mm. mRC was 65.06 ± 48.26%, cRC was 25.61%, mRR was 0.87 ± 0.83 mm, and gingival thickness gain was 0.33 ± 0.30 mm, with comparable results for RT1 and RT2. Neither tooth type nor type of jaw had any effect on the amount of root coverage. CONCLUSIONS: The digital evaluation workflow employed offers an approach to evaluate gingival recession coverage outcomes independent of the CEJ. The PDM used in combination with the MCAT shows promising results for root coverage.

A preliminary investigation into the impact of soft tissue augmentation-based periodontal phenotype modification therapy for patients exhibiting class III decompensation.

BACKGROUND: Patients with skeletal angle Class III malocclusion usually have inadequate hard and soft tissue volume at the mandibular anterior teeth. The labial proclination at the teeth may lead to gingival recession. The purpose of this study was to explore whether periodontal phenotype modification therapy with soft tissue augmentation (PhMT-s) can prevent gingival recession in these patients. METHODS: Four patients with skeletal Class III malocclusion and a thin periodontal phenotype underwent surgical-orthodontic treatment. Prior to tooth movement, they underwent a minimally invasive vestibular incision with subperiosteal tunnel access combined with autogenous connective tissue grafts for periodontal phenotype modification with soft tissue augmentation (PhMT-s). The labial gingival thickness of the anterior mandibular teeth was measured at three distinct levels: at the cementoenamel junction (GT0), 3 mm apical to the CEJ (GT3), and 6 mm apical to the CEJ (GT6). These measurements were taken at baseline, three months following PhMT-s, and after tooth decompensation. Additionally, a biopsy sample was obtained from the PhMT-s site of one patient. All sections were subsequently stained using hematoxylin and eosin, Masson trichrome, Sirius Red, and immunohistochemistry. RESULTS: The thickness of the labial gingiva was increased about 0.42 to 2.00 mm after PhMT-s. At the end of pre-orthognathic surgical orthodontic treatment, the thickness of the labial gingiva was increased about - 0.14 to 1.32 mm compared to the baseline and no gingival recession occurred after the pre-orthognathic surgical orthodontic treatment. The histologic results demonstrated that the grafts obtained from the PhMT-s site exhibited increased deposition of collagen fibers. Moreover, the proportion of type III collagen increased and the grafts displayed significantly reduced positive expression of CD31 and OCN. CONCLUSIONS: PhMT-s increased the thickness of the soft tissue, stabilizing the gingival margin for teeth exhibiting a thin periodontal phenotype and undergoing labial movement. This is attributed to the increased deposition of collagen fibers.

Estimation of sex assigned at birth using dental crown and cervical measurements in a modern global sample.

Despite developing prior to the appearance of secondary sexual characteristics of the skeleton, the permanent dentition exhibits sexual dimorphism. Therefore, teeth can serve as a means to estimate sex assigned at birth even in young individuals. This project takes a large global sample of maximum dimensions of the crown as well as measurements of the crown at the cervix to explore sexual dimorphism. Dimorphism is noted in teeth throughout the dental arcade, particularly in the canines. We provide sectioning points as well as the probability of correct classification (ranging from 50.9% to 81.3%) for each measurement to aid the practitioner in sex estimation from the dentition. This research provides a method to estimate sex without arbitrary population specifications. We argue for a global approach that incorporates more population variation to remove the need to estimate "ancestry," (which in actuality is translated to a social race category) and therefore does not force sexual dimorphism-related variation into these mutable and ambiguous categories. Further, this paper demonstrates the utility of the dentition as an additional indicator to aid with the estimation of sex assigned at birth in forensic anthropology. The goal of this research is to better understand the expression of sexual dimorphism across the skeleton in a global context.

Long-term prognosis for teeth with external cervical resorption based on periapical images and cone beam CT: A clinical study.

AIM: To evaluate whether supplemental information from CBCT changed long-term prognosis for teeth with external cervical resorption (ECR) compared to periapical (PA) images. Furthermore, to assess predictive findings in PA images and evaluate which findings in CBCT affected the long-term prognosis of teeth with ECR. METHODOLOGY: One hundred and ninty-four patients, mean age 41.2, range 13-81, having 244 teeth with ECR were included. An initial long-term prognosis determined either good or poor was established based on intraoral images. Afterwards, the patients underwent CBCT, and final long-term prognosis was decided. From the PA images and CBCT, ECR using Heithersay's classification system, pulp involvement and extension of ECR was assessed. In CBCT, the number of surface lesion(s) was additionally assessed. Descriptive statistics evaluated changes in long-term prognosis after CBCT. Logistic regression analyses tested if findings in PA images and CBCT affected the long-term prognosis. RESULTS: Based on CBCT, out of 244 teeth the long-term prognosis was assessed to be poor for 173 (70.9%) teeth and good for 71 (29.1%) teeth. The long-term prognosis changed in 76 (31.1%) teeth after CBCT; 5 (2.0%) changed from poor to good, and 71 (29%) changed from good to poor long-term prognosis. In 81 (33.2%) teeth the H-class increased, and in 10 (4.1%) teeth the H-class decreased after assessing CBCT. In 70 (28.7%) teeth, there was a change from no pulp involvement to involvement of the pulp after CBCT; eight (3.3%) teeth changed in the opposite direction. H-class 2 and 4 in PA images significantly increased the probability for a change in long-term prognosis compared to an H-class 3 (p < .05). H-class 4, pulp involvement, ECR in the oral 1/3 of the root, and more than two surface lesions seen in CBCT significantly influenced a poor long-term prognosis (p < .05). CONCLUSIONS: Supplemental information from CBCT changed long-term prognosis in almost one third of teeth with ECR. In most cases, the long-term prognosis changed from good to poor. H-class 3 in PA images had a significant influence on change in long-term prognosis. Several findings in CBCT influenced a poor long-term prognosis.

Exploring access cavity through non-carious cervical lesions: Impacts on instrumentation, obturation, and fracture resistance in mandibular incisors.

AIM: To compare the effects of Cervical Access Cavity (CervAC) and Traditional Access Cavity (TradAC) on root canal preparation, root canal filling, and fracture resistance in mandibular incisors. METHODOLOGY: Twenty recently extracted and intact mandibular incisors were initially scanned using a micro-CT device. The specimens were anatomically matched to create two groups (n = 10). A wedge-shaped non-carious cervical lesion (NCCL) was created on the buccal aspect of all teeth using a double-faced segmented diamond disc. In group 1, a TradAC was prepared, whilst in group 2, access was created through the simulated NCCL using a round diamond bur 1012. After root canal preparation with Rotate instruments sizes 15/0.04, 20/0.04, and 25/0.04, the teeth were scanned again and evaluated for root canal volume and surface area, static voxels, volume of removed dental tissue, and dentine thickness. After that, the root canals were filled using the single-cone technique, teeth were restored with composite resin, and subsequently rescanned to calculate the volume of filling materials and voids. Then, the restored teeth were subjected to fracture resistance tests using a universal testing machine. Statistical comparisons between groups were performed with the Mann-Whitney test or the Student's t-test, with a statistical significance level of 5%. RESULTS: Statistical comparisons indicated no significant differences between groups in terms of root canal volume, surface area, static voxels, removed root dentine, root canal filling volume, percentage of voids, or fracture resistance load (p > .05). Conversely, teeth prepared with TradAC showed a significantly higher percentage of dental tissue removed from the crown (p = .001) and a greater volume of filling material remnants in the pulp chamber (p < .001) compared to the CervAC group. A significantly lower percentage reduction in dentine thickness was observed only on the mesial aspect of root at Level 1 in TradAC group (p = .008). CONCLUSIONS: CervAC can be considered a viable alternative approach in the presence of NCCL in mandibular incisors.

Noncarious cervical lesions: A bibliometric analysis and future research trends.

OBJECTIVE: The present bibliometric review analyzed the literature on non-carious cervical lesions (NCCLs) to explore the current state and propose future research topics. DATA: An electronic search was performed, only full scientific papers published in English were included. SOURCES: A search was conducted of all databases in the Web of Science (WOS) platform for available publications on the topic of NCCLs. STUDY SELECTION: 959 publications were retrieved, and the following data were extracted and analyzed: number of publications, study topics, keywords, study type, authors, affiliations, countries, funding agencies, journals and citations. Articles on NCCLs have been increasing in count, ever since they were first mentioned in the literature. Therapy alternatives account for 628 with few on prevention, and the majority were clinical. Brazil has published the most on NCCLs as well as has the highest number of authors and the most funded articles. The three journals that published the most on the topic were Operative Dentistry, Journal of Dentistry and Clinical Oral Investigations. CONCLUSION: The findings of this study provide a full picture of the current literature on NCCLs, research trends, knowledge gaps, and areas requiring further investigation. CLINICAL SIGNIFICANCE: By highlighting evolving treatment strategies and potential gaps in prevention, researchers can contribute to the advancement of clinical practice. This can improve patient care and outcomes in the management of NCCLs, while also providing valuable insights for policymakers to prioritize research funding and policy initiatives.

Morphological characteristics of non-carious cervical lesions. A systematic review.

OBJECTIVES: This systematic review assessed the morphological characteristics of non-carious cervical lesions (NCCL), among clinical and ex-vivo studies assessed by observational and imaging methods. DESIGN: The search strategy was conducted on four online databases (MEDLINE, Embase, Scopus and Web of Science) and grey literature (Google Scholar and OpenGrey). The study selection was performed by three reviewers from March to September (2023). The eligibility criteria were established according to the PICO strategy and included NCCL, morphological characteristics and clinical and ex-vivo study designs. The data extraction considered general data that identifies the study, evaluation method, parameter to assess the outcome and the main results for each study. The risk of bias was evaluated using Joanna Briggs Institute critical appraisal tool, and a personalized tool. RESULTS: The search resulted in 252 studies. A total of 14 studies were included. Prevalence of NCCLs ranged from 3.5 %to 77.78 % with a higher presence in premolars. Common characteristics were wear facets, occluded tubules or cracks, occlusal stress, scratch marks, dimples and craters, structure loss, and dentin sclerosis, which appear more often on buccal surface and were generally classified as wedge-shaped, saucer-shaped. Etiological hypothesis was mainly related to multifactorial factors. In most of the studies, the risk of bias was classified as high. CONCLUSIONS: The morphological characteristics of NCCL showed a wide range of descriptions regarding appearance, prevalence, lesion-related measures, and macro and microscopic descriptions.

Sandblasting increases the microtensile bond strength between resin and sclerotic dentin in noncarious cervical lesions.

PURPOSE: To evaluate the effect of sandblasting on the microtensile strength between sclerotic dentin and resin composite. METHODS: 32 premolars with noncarious cervical lesions (NCCLs) were collected, and the teeth were randomly assigned to the control group (C group) and the sandblasted group (S group). Teeth in the S group were sandblasted with 110 µm Al2O3 particles at a pressure of 75 psi, while those in the C group received no further treatment. The characteristics of the tooth surface were observed by scanning electron microscopy (SEM), and the relative area of open dentin tubules (OTs) was calculated by IPP6.0 software. Surface roughness (Ra) was also assessed. The noncarious cervical lesions of all teeth were restored with a resin composite and subsequently sectioned into sticks to measure the microtensile bond strength (µTBS). RESULTS: The mean ± SD µTBS (in MPa) of the sandblasted group was 17.9 ± 0.69 and 14.23 ± 0.44 in the control group (P< 0.05). The relative area of OTs at the gingival wall of the sandblasted group was 69.74 ± 5.23%, and 47.24 ± 7.67% in the control group (P< 0.05). The average surface roughness (µm) was 1.01 ± 0.05 in the sandblasted group and 0.16 ± 0.03 in the control group. Sandblasting could increase the bond strength of sclerotic dentin and resin restorations. CLINICAL SIGNIFICANCE: After sandblasting, the microtensile strength of sclerotic dentin on the surface of noncarious cervical lesions increased, prolonging the resin adhesion longevity. Sandblasting could also alleviate the pain of patients during the treatment process and achieve a minimally invasive treatment.

A 2-Year Randomized Clinical Trial of Three Bonding Techniques in Non-Carious Cervical Lesions.

Background and objective: The aim of this randomized split-mouth study-controlled clinical trial was to compare the 2-year clinical performance of resin composite restorations placed at non-caries cervical lesions (NCCL) with one-step self-etch, total-etch, and selective enamel etch and self-etch adhesive techniques. Materials and methods: Thirty-two patients received three resin composite restorations each at NCCLs (Tetric EvoCeram/Ivoclar/Vivadent), bonded with a total-etch adhesive agent (ExciTE F/Ivoclar/Vivadent) and a self-etch (AdheSE One F/Ivoclar/Vivadent) without and with selective enamel etching. All restorations were evaluated by two examiners at baseline, 6-, 12-, 18-, and 24-months with FDI clinical criteria (post-operation regarding retention, caries occurrence, marginal adaptation, and marginal staining). A logistic regression analysis, a Cohen's kappa statistic, a multifactorial analysis, and X2 were performed with generalized estimating equations. Results: After 2 years, the retention rate was 86.8% for total etch, 92.26% for self-etch, and 93.63% for selective enamel etching and self-etch. No caries was detected on the restorations. Concerning marginal adaptation, the clinically perfect restorations were 26.9% for the total-etch technique, 16% for self-etch, and 25.9% for selective enamel etch and self-etch. The logistic regression model revealed that only time reduced the probability of perfect marginal adaptation. Conclusions: All three adhesive strategies provided restorations with no significant differences in the retention rate or marginal adaptation, whereas the total etch yielded better performance for marginal staining. All restorations were assessed as clinically acceptable after 2 years.

Challenges in differential diagnosis and treatment of cervical root resorption vs. root caries.

External cervical root resorption may be occasionally mistaken for root caries and vice versa. Radiographical and clinical differential diagnoses of cervical root resorption and root caries are essential for correct treatment planning and a successful treatment outcome. This article reviews the contemporary literature and summarises the prevailing professional consensus pertaining to external cervical root resorption. Clinical diagnostics which help distinguish cervical root resorption from root caries are outlined and treatment approaches of external cervical root resorption are discussed.

Evaluation of the relationship between periodontal bone destruction and mesial root concavity of the maxillary first premolar.

BACKGROUND: The purpose of this study was to investigate the morphology of maxillary first premolar mesial root concavity and to analyse its relation to periodontal bone loss (BL) using cone beam computed tomography (CBCT) and panoramic radiographs. METHODS: The mesial root concavity of maxillary premolar teeth was analysed via CBCT. The sex and age of the patients, starting position and depth of the root concavity, apicocoronal length of the concavity on the crown or root starting from the cementoenamel junction (CEJ), total apicocoronal length of the concavity, amount of bone loss both in CBCT images and panoramic radiographs, location of the furcation, length of the buccal and palatinal roots, and buccopalatinal cervical root width were measured. RESULTS: A total of 610 patients' CBCT images were examined, and 100 were included in the study. The total number of upper premolar teeth was 200. The patients were aged between 18 and 65 years, with a mean age of 45.21 ± 13.13 years. All the teeth in the study presented mesial root concavity (100%, n = 200). The starting point of concavity was mostly on the cervical third of the root (58.5%). The mean depth and buccolingual length measurements were 0.96 mm and 4.32 mm, respectively. Depth was significantly related to the amount of alveolar bone loss (F = 5.834, p = 0.001). The highest average concavity depth was 1.29 mm in the group with 50% bone loss. The data indicated a significant relationship between the location of the furcation and bone loss (X2 = 25.215, p = 0.003). Bone loss exceeded 50% in 100% of patients in whom the furcation was in the cervical third and in only 9.5% of patients in whom the furcation was in the apical third (p = 0.003). CONCLUSIONS: According to the results of this study, the depth of the mesial root concavity and the coronal position of the furcation may increase the amount of alveolar bone loss. Clinicians should be aware of these anatomical factors to ensure accurate treatment planning and successful patient management.

Risk factors for noncarious cervical lesions: A case-control study.

OBJECTIVES: Noncarious cervical lesions (NCCLs) are multifactorial and can be caused by the anatomical structure of the teeth, erosion, abrasion and abnormal occlusion. The aim of this case-control study was to explore the risk factors for NCCLs. METHODS: Cone-beam computed tomography was used to determine whether a wedge-shaped defect existed at the cementoenamel junction. We compared 63 participants with NCCLs with 63 controls without NCCLs, matched for sex, age (±1 year) and toothbrushing-related factors (e.g., type of bristle and brushing patterns, frequency and strength). All participants were asked to complete a questionnaire about self-administered daily diet habits and health condition. Univariate and multivariate logistic regression analyses were conducted to determine the risk factors for NCCLs. RESULTS: Significant variables in the univariate analysis (i.e., p < .2) included frequency of carbonated beverage consumption, sella-nasion-point B angle (SNB) and Frankfort-mandibular plane angle (FMA). Multivariate logistic regression demonstrated that the consumption frequency of carbonated beverages (odds ratio [OR] = 3.147; 95% confidence interval [CI], 1.039-9.532), FMA (OR = 1.100; 95% CI, 1.004-1.204) and SNB (OR = 0.896; 95% CI, 0.813-0.988) was independent influencing factors. The area under the receiver operating characteristic curve (AUC) value of regression Model 1 (established with the frequency of carbonated beverage consumption, FMA, SNB and sleep bruxism) was 0.700 (95% CI, 0.607-0.792; p < .001), and that of regression Model 2 (established using the frequency of carbonated beverage consumption, FMA and SNB) was 0.704 (95% CI, 0.612-0.796; p < .001). CONCLUSIONS: The consumption frequency of carbonated beverages and FMA was risk factors for NCCLs; the higher the frequency of carbonated beverage consumption and FMA, the higher was the probability of NCCLs. SNB was a protective factor for NCCL occurrence; the larger the SNB, the lower was the probability of NCCL occurrence. These findings have further clarified the aetiology of NCCLs and provided clinicians with valuable insights into strategies for preventing the loss of dental tissue.

EFFECT OF LOW-LEVEL DIODE LASER ON DENTIN TOPOGRAPHY AND SYMPTOMATIC NONCARIOUS CERVICAL LESIONS PRIOR TO COMPOSITE RESTORATIONS: A SPLIT-MOUTH RANDOMIZED CONTROLLED TRIAL.

OBJECTIVES: This study assessed alterations in sensitivity among symptomatic noncarious cervical lesions (NCCLs) following the application of 3 low-level diode laser wavelengths before composite restoration. It analyzed the changes in dentin topography using a scanning electron microscope (SEM). MATERIALS AND METHODS: Nine patients with 36 NCCLs were randomly assigned intra-individually to 4 groups based on the laser wavelength: laser simulation, 445 nm, 660 nm, and 970 nm. Cavity preparation, irradiation, and composite restoration were performed for each lesion. Sensitivity to cold stimuli was recorded using a visual analog scale (VAS) before the intervention (baseline) and at 1 day, 14 days, 1-, 3-, and 6-month. Pulp sensibility was recorded using an electrical pulp tester (EPT) at baseline, before treatment, and at 3- and 6-month. Additionally, an in vitro examination was performed on 12 extracted human molars to yield 12 dentin discs. Each disc was randomly divided into 4 quadrants to receive the same laser wavelengths to determine the diameters of the tubules using SEM. Results were analyzed statistically for clinical studies by the Friedman test, while ANOVA (RM-ANOVA) was conducted in-vitro, followed by the Bonferroni test in the case of significance (P < .05). RESULTS: VAS readings decreased across all groups, with a significant decrease observed for 660 nm and 970 nm from 14 days to 6-month, while at 445 nm there was a significant decrease at 6-month compared to the control (P < .05). EPT showed a significant decrease in pain threshold levels at 660 nm and 970 nm at 3- and 6-month, while 445 nm showed a significant decrease at 6-month compared to the control (P < .05). The mean tubular diameter at 445 nm decreased, with no significant difference from the control, whereas a significant decrease was found at 660 nm and 970 nm compared to the control (P < .05). CONCLUSIONS: Prior to composite restoration in symptomatic NCCLs, diode lasers with a wavelength of 660 nm showed the highest reduction in sensitivity, followed by 970 nm, whereas 445 nm diode lasers showed the least reduction. Additionally, diode lasers with wavelengths of 660 and 970 nm reduced the width of the dentinal tubules (DT) without inducing melting, as viewed under SEM.

Clinical Performance of Short Fibre-reinforced Glass Ionomer Cement Restorations in Cervical Carious Lesions: 12-Month Randomized Clinical Trial.

The aim was to assess the clinical performance of experimental short fiber-reinforced glass-ionomer cement (FR-GIC) in the treatment of cervical caries lesions. A total of 45 patients were randomly enrolled in this trial according to the split-mouth design. The FR-GIC was prepared by adding short glass fibers at a mass ratio of 20% into the powder portion of Fuji II LC. The cervical lesions in the intervention group were restored with FR-GIC, while unmodified Fuji II LC was applied as the control. Clinical evaluation was performed by two blinded operators at baseline, at 6, and 12 months using modified USPHS criteria. The data were analyzed using Friedman's test, followed by the Nemenyi post hoc test with a significance level of α = 0.05. After 1 year, all restorations were fully retained. There was no statistically significant difference (p⟩0.05) between the two materials based on the evaluated criteria. Both groups had 4 (10%) cases with Bravo scores for cavos-surface marginal discoloration. Regarding marginal integrity, Bravo scores were observed in 5 (12.5%) cases in the intervention group and 4 (10%) cases in the control group. Both materials in the treatment of cervical caries lesions demonstrated satisfactory clinical outcome throughout the 12-month follow-up.

Cervical wear pathobiology by robot-simulated 3-year toothbrushing - New methodological approach.

OBJECTIVES: An ex-vivo study was aimed at (i) programming clinically validated robot three-year random toothbrushing, (ii) evaluating cervical macro- and microwear patterns on all tooth groups of different functional age, (iii) documenting and codificating wear related morphological features at the cemento-enamel junction in young teeth and on roots in older teeth. DESIGN: Following ethical approval random toothbrushing (44 strokes per tooth horizontally, rotating, vertically; 2x/d) with manual toothbrushes and low-abrasive dentifrice was performed in an artificial oral cavity with brushing-force 3.5 N on 14 extracted human teeth. Morphological features were examined by SEM at baseline and after simulated 3 years using the replication technique. 3D-SEM analyses were carried out with a four-quadrant back scattered electron detector. Wilcoxon-Mann-Whitney-test was used for statistical analyses. RESULTS: 3-year random toothbrushing with horizontal, rotating and vertical brushing movements revealed morphological features classified as four enamel patterns, one dentin pattern and three cervical patterns. Negative impacts were enamel, cementum and dentin loss. Positive impact on oral health was removing dental calculus and straightening cervical traumatic and iatrogenic damages. The volume loss varied from x̅=34.25nl to x̅=87.75nl. Wear extended apically from 100 to 1500 micrometres. CONCLUSION: Robot simulated toothbrushing in an artificial oral cavity, with subsequent SEM and 3D-SEM assessment, elucidated both negative and oral health-contributing micromorphology patterns of cervical wear after simulated 3-year random toothbrushing. Cervical macro- and microwear of cementum revealed, for the first time, what we describe as overhanging enamel peninsulas and enamel islands on roots in young teeth, but no enamel islands on roots from older teeth after root cementum loss. In contrast, many older teeth exhibited enamel peninsulas.

Cone beam computed tomography assessment of maxillary anterior teeth cervix dimensions in healthy adults for optimal anatomic healing abutments.

OBJECTIVES: The abutments produced with circular symmetry failed to accurately replicate the natural teeth's cervical shapes. The purpose of this study was to measure cervical cross-sections of maxillary anterior teeth using cone beam computed tomography (CBCT) images to design anatomic healing abutments. MATERIALS AND METHODS: CBCT data of 61 patients were analyzed using Ez3D Plus software. Measurements were taken at the cemento-enamel junction (CEJ) and 1 mm coronal to CEJ for maxillary central incisors, lateral incisors, and canines. Various parameters, including area, perimeter, and eight line segments in the distal (a), disto-palatal (b), palatal (c), mesio-palatal (d), mesial (e), mesio-labial (f), labial (g), and disto-labial (h) directions, were used to describe dental neck contours. The ratios (f/b and h/d) were analyzed, and differences based on sex and dental arch morphology were explored. RESULTS: Significant differences were found in area and perimeter between males and females, but not in f/b and h/d ratios. Differences in the f/b ratio were observed among dental arch morphologies for maxillary central incisors, lateral incisors, and canines. CONCLUSIONS: CBCT measurements of cervical cross-sections provide more accurate data for designing anatomic healing abutments. The fabrication of anatomical healing abutments needs to consider the influence of gender on cervical size and to explore the potential effect of arch shape on cervical morphology. CLINICAL SIGNIFICANCE: The novel method provides detailed measurements for the description of dental cervical contours for patients with bilateral homonymous teeth missing. The measurements of this study could be utilized to design more accurate anatomic healing abutments to create desired morphology of peri-implant soft tissue.

Biometric analysis of furcation area of molar teeth and its relationship with instrumentation.

The anatomy of furcation favours the bacterial retention and makes periodontal debridement as well as oral hygiene procedures difficult. Teeth that have lost attachment to a level of the furcation are said to have a furcal invasion or furcation involved.Involvement of furcation in a multi-rooted tooth poses a very different type of clinical situation in terms of establishment of diagnosis, determination of prognosis and of course planning the treatment modality.The present study was carried out on 200 selected extracted human first and second permanent molar teeth based on a predefined criteria. Teeth with prosthetic crowns, fused or fractured roots, those not fully developed, grossly carious or heavily restored at the cementoenamel junction (CEJ) were excluded from the study. The morphology of the root trunk was recorded by measuring various dimensions of the root trunk,including furcal angle and root trunk volume was calculated by using a custom made special apparatus. The furcation areas were debrided with different types of curettes in the market in order to see how best the instrument could be maneuvered in the furcation area. The data so obtained was statistically analysed using SPSS version 22. The highest root trunk volume and the longest root trunk length were found to be in the maxillary second molar. 48.60% furcations didn't allow instrument engagementof furcation area with standard area specific curettes. The proposal of inclusion of root trunk length (mm) is suggested in addition to classification of FI to have assess prognosis and appropriate treatment for of the involved tooth.

Root surface roughness evaluation following application of different periodontal instruments and Er:YAG laser: A profilometry and SEM study.

AIM: The aim of the present study was to evaluate the efficacy of 30°-angled Er:YAG laser tip and different periodontal instruments on root surface roughness and morphology in vitro. METHODS: Eighteen bovine teeth root without carious lesion were decoronated from the cementoenamel junction and seperated longitidunally. A total of 36 obtained blocks were mounted in resin blocks and polished with silicon carbide papers under water irrigation. These blocks were randomly assigned into 3 treatment groups. In Group 1, 30°-angled Er:YAG laser (2.94 µm) tip was applied onto the blocks with a 20 Hz, 120 mJ energy output under water irrigation for 20 s. In Groups 2 and 3, the same treatment was applied to the blocks with new generation ultrasonic tip and conventional curette apico-coronally for 20 s with a sweeping motion. Surface roughness and morphology were evaluated before and after instrumentation with a profilometer and SEM, respectively. RESULTS: After instrumentation, profilometric analysis revealed significantly higher roughness values compared to baseline in all treatment groups(p < 0.05). Laser group revealed the roughest surface morphology followed by conventional curette and new generation ultrasonic tip treatment groups (p < 0.05). In SEM analysis, irregular surfaces and crater defects were seen more frequently in the laser group. CONCLUSION: Results of the study showed that the use of new generation ultrasonic tip was associated with smoother surface morphology compared to 30°-angled Er-YAG laser tip and conventional curette. Further in vitro and in vivo studies with an increased sample size are necessary to support the present study findings.

A depth-resolved quantitative evaluation method for non-carious cervical lesions treatment with optical coherence tomography.

OBJECTIVES: The aim of this study is prognostic assessment of surface smoothness and the presence of internal bubbles after treatment of non-cancerous cervical lesions (NCCLs) using optical coherence tomography (OCT). METHODS: After treatment with NCCLs, cross-sectional images of the lesion parts of the sample were non-invasively acquired and analyzed. The surface smoothness between tooth and resin, resin and cemento-enamel junction, and the presence bubble inside resin was confirmed. In addition, using an algorithm that distinguishes between resin and dental structure based on OCT cross-sectional images, we quantitatively analyzed the amount of resin used in treating NCCLs and acquired 3D images. RESULTS: The inner structure of the resin in each sample was checked, and the presence of bubbles was confirmed. In addition, the resin sections were separated from the tomographic images acquired by OCT to visualize 3D images. The volume of resin used in the treatment part of each NCCLs samples was quantitatively analyzed as 3.7216 ∼ 14.889 mm3. CONCLUSIONS: OCT is able to measure not only the surface abrasion provided by existing intraoral scanner, but also the size and depth location of interal bubbles, which is distinctive advantage of our method. Based on our results, OCT is a significant tool for qualitative and quantitative analysis of dental NCCLs treatment before and after treatment. CLINICAL SIGNIFICANCE: The study used OCT, a non-destructive diagnostic, to reveal the structure of the resin and the location and size of bubbles after NCCLs treatment. These findings could be golden standard in determining the prognosis of NCCLs treatment.