A comparative study on the formation of nitrogen-containing organic compounds in cloud droplets and aerosol particles.

Nitrogen-containing organic compounds (NOCs) may potentially contribute to aqueous secondary organic aerosols, yet the different formation of NOCs in aerosol particles and cloud droplets remains unclear. With the in-situ measurements performed at a mountain site (1690 m a.s.l.) in southern China, we investigated the formation of NOCs in the cloud droplets and the cloud-free particles, based on their mixing state information of NOCs-containing particles by single particle mass spectrometry. The relative abundance of NOCs in the cloud-free particles was significantly higher than those in cloud residual (cloud RES) particles. NOCs were highly correlated with carbonyl compounds (including glyoxalate and methylglyoxal) in the cloud-free particles, however, limited correlation was observed for cloud RES particles. Analysis of their mixing state and temporal variations highlights that NOCs was mainly formed from the carbonyl compounds and ammonium in the cloud-free particles, rather than in the cloud RES particles. The results support that the formation of NOCs from carbonyl compounds is facilitated in concentrated solutions in wet aerosols, rather than cloud droplets. In addition, we have identified the transport of biomass burning particles that facilitate the formation of NOCs, and that the observed NOCs is most likely contributed to the light absorption. These findings have implications for the evaluation of NOCs formation and their contribution to light absorption.

[Construction effect of fertile cultivated layer in albic soil â Effects of inversion tillage with organic mate-rials on the redistribution of organic matter in surface layer of albic soil]. / 白浆土肥沃耕层构建效应â .不同有机物料深混对白浆土有机质在表层土壤中再分布的影响.

Soil organic matter serves as a crucial indicator for soil quality. Albic soil, characterized by a barrier layer, exhibits limitations in organic matter content, which can adversely affect crop growth and development. To elucidate the impact of deep mixing of various organic materials on the redistribution of organic matter in the surface soil of albic soil could provide theoretical and technical insights for establishing suitable plough layers for albic soil in Northeast China. We conducted a two-year positioning experiment in Shuangyashan, Heilongjiang Province with five treatments, conventional shallow tillage (0-15 cm, CK), inversion tillage (0-35 cm) without or with straw return (T35 and T35+S), inversion tillage with cattle manure (T35+M) and cattle manure plus maize straw (T35+S+M). The results showed that soil fertilization via deep mixing of organic materials to a depth of 35 cm significantly increased maize yield in albic soil, with the T35+S+M treatment demonstrating the most pronounced effect, yielding an average production of 2934.76 kg·hm-2. Compared to CK, the T35 treatment resulted in a significant 8.4% decrease in organic matter content in the tillage layer, a significant 7.6% increase in organic matter in the sub-tillage layer, and a relative richness degree of soil organic matter in the sub-tillage layer increased by 17.5%. Deep mixed return of organic materials following deep ploughing markedly increased organic matter content of the plough layer, with organic matter conversion ranging from 16.3% to 31.0%. In comparison to the T35 treatment, there was no significant increase in soil organic matter content in the T35+S tillage layer and sub-tillage layer. Conversely, soil organic matter content increased by 4.6% and 6.9% in the T35+M and T35+S+M treatments, with corresponding increase of 11.2% and 15.4% in sub-tillage layer, respectively. Additionally, the soil organic matter richness index in sub-tillage layer increased by 2.5% and 5.1%, respectively. There was a significant positive correlation between organic matter content in the entire plough layer and maize yield, with a contribution rate of 17.5%. Therefore, the utilization of organic fertilizer or a combination of organic fertilizer and straw deep mixing can quickly fertilize albic soil by increasing soil organic matter content in both the whole tillage layer (0-35 cm) and the sub-tillage layer (15-35 cm).

Oxyanion-Sensitive Catalytic Activity of Ni(II)/Oxyanion Systems for Heterogeneous Organic Degradation: Differential Oxidizing Capacity of Ni(III) and Ni(IV) as High-Valent Intermediates.

This study demonstrated that NiO and Ni(OH)2 as Ni(II) catalysts exhibited significant activity for organic oxidation in the presence of various oxyanions, such as hypochlorous acid (HOCl), peroxymonosulfate (PMS), and peroxydisulfate (PDS), which markedly contrasted with Co-based counterparts exclusively activating PMS to yield sulfate radicals. The oxidizing capacity of the Ni catalyst/oxyanion varied depending on the oxyanion type. Ni catalyst/PMS (or HOCl) degraded a broad spectrum of organics, whereas PDS enabled selective phenol oxidation. This stemmed from the differential reactivity of two high-valent Ni intermediates, Ni(III) and Ni(IV). A high similarity with Ni(III)OOH in a substrate-specific reactivity indicated the role of Ni(III) as the primary oxidant of Ni-activated PDS. With the minor progress of redox reactions with radical probes and multiple spectroscopic evidence on moderate Ni(III) accumulation, the significant elimination of non-phenolic contaminants by NiOOH/PMS (or HOCl) suggested the involvement of Ni(IV) in the substrate-insensitive treatment capability of Ni catalyst/PMS (or HOCl). Since the electron-transfer oxidation of organics by high-valent Ni species involved Ni(II) regeneration, the loss of the treatment efficiency of Ni/oxyanion was marginal over multiple catalytic cycles.

Insight into response mechanism of short-chain fatty acids to refined microbial transformation order of dissolved organic matter ranked by molecular weight during dry anaerobic digestion.

Dynamic transformation of dissolved organic matter (DOM) contributes to short-chain fatty acids (SCFAs) production during anaerobic digestion. However, the impact of refined transformation of DOM ranked by molecular weight (MW) on SCFAs has never been investigated. Results indicated that DOM conversion order was 3500-7000 Da>(MW>14000 Da) > 7000-4000 Da during hydrolysis stage, while it was independent of their MW in acidogenesis phase and followed a low to high MW order during methanogenesis stage. Proteins-like DOMs with different MW were closely related to SCFAs. Eight groups of microorganisms (e.g., Bacillus and Caldicoprobacter) responsible for the conversion of proteins-like DOMs to SCFAs. The possible routes linking environmental properties to microorganisms-proteins-like DOMs-SCFAs connections were constructed. Microbial activity modifications by regulating moisture, pH, NO3--N and NH4+-N can expedite the conversion of proteins-like DOMs to SCFAs. The study emphasizes the importance of MW-classification-based biotransformation of organic waste, offering a potential strategy to enhance anaerobic digestion performance.

Long-term acclimation to organic carbon enhances the production of loliolide from Scenedesmus deserticola.

Production of functional biocompounds from microalgae has garnered interest from different industrial sectors; however, their overall productivity must be substantially improved for commercialization. Herein, long-term acclimation of Scenedesmus deserticola was conducted using glucose as an organic carbon source to enhance its heterotrophic capabilities and the production potential of loliolide. A year-long acclimation on agar plates led to the selection of S. deserticola HS4, which exhibited at least 2-fold increase in loliolide production potential; S. deserticola HS4 was subjected to further screening of its cultivation conditions and fed-batch cultivation was subsequently performed in liter-scale reactors. While S. deserticola HS4 exhibited shifts in cellular morphology and biochemical composition, the results suggested a substantial increase in its loliolide productivity regardless of trophic modes. Collectively, these results highlight the potential of long-term acclimation as an effective strategy for improving microalgal crops to align with industrial production practices.

Tracing fluorescent dissolved organic matter (fDOM) characteristics and water quality parameters: Insights from an urban industrial river to marine zone.

This study aims to identify continuous water quality changes and identify fluorescence properties from urban rivers to marine zones. Various types of natural and anthropogenic sources derived dissolved organic matter (DOM) have been identified in this study. These include soil-derived DOM, plant remnants, and soluble particles produced when organic material partially decomposes and is released by microorganisms, such as bacteria, algae, and plants. DOM was characterized using a three-dimensional excitation-emission matrix (3DEEM), parallel factor analysis (PARAFAC), and water quality parameters from the Buriganga River, Dhaka to Patenga Seaport, Chittagong, along with the Shitalakshya River, a small portion of the Padma River, and the Meghna River. To better understand the data analysis, the study area was divided into three central regions: urban industrial rivers, industrial estuarine rivers, and marine zones. In the urban industrial river, 3DEEM and PARAFAC identified five fluorophores (peaks: A, C, M, T, and Tuv) with five components: detergent-like, fulvic-like, tryptophan or protein-like, fulvic-like (C-type), and protein-like, which might originate from the industrial activities and sewage pollution. In the industrial estuarine river zone, three fluorophores have been identified (peaks: A, C, Tuv) with two known components, namely, fulvic acid (A-type) and fulvic acid (C-type), with an unknown photoproduct at Ex/Em = 295/368 (peak Tuv). Components in the industrial river zone may originate from terrestrial sources, indicating vegetation along the river. In the marine zone, four fluorophores have been identified (peaks: Tuv, A, T, C) with two components, that is, protein- or tryptophan-like and humic acid-like from coral origin. The intensities of both fulvic-like and protein-like substances were high in urban industrial river water owing to industrial activity and sewage pollution. SUVA254 suggests high aromaticity in all three regions, whereas the optical properties suggest that terrestrial and microbial components are present in the urban industrial and estuarine rivers. This further indicates that urban industrial river water quality is highly polluted. The lowest degradation potential index (DPI) in the marine zone might result from the presence of the highest number of dissolved solids in the water, and the highest DPI of industrial estuarine rivers explains the comparatively high presence of terrestrial-derived humic (A)- and humic (C)-like components in the ratio to the unknown photoproduct of mid-wavelength. PRACTITIONER POINTS: This study's uniqueness is a 220-km cruise from an urban river to a coastal seaport to analyze fluorescence properties. The study found that most water parameters were within the DoE standards, except for DO, which was consistently low. 3DEEM-PARAFAC identified five fluorophores linked to detergent, fulvic, and protein-like substances from sewage and industrial sources. Our study concludes that microbial and terrestrial sources dominate dissolved organic matter in urban, estuarine, and marine regions.

Soil organic carbon fractions and their stability under different land uses in wind erosion area of Northeast China.

Exploring the physical fractions of organic carbon and influencing mechanisms in grassland, forest, and farmland soils in wind erosion area can provide scientific basis for carbon sequestration, land utilization, wind prevention measure making, and fertility restoration of sloping farmland in the region. We examined the differentiation of aggregate organic carbon and density fractionation organic carbon in 0-15 cm soil layer across grassland, forest, and sloping farmland with 350 m long and 5° slope gradient in the wind erosion area of Meilisi District, Qiqihar, Heilongjiang, as well as the sloping farmland in the downhill section, middle section, and uphill section with every 100 m apart from the bottom to the top. The results showed that soil aggregates >2 mm were all destroyed across grassland, forest, and farmland soils, while the percentage of aggregates <0.053 mm was significantly higher than that of other sizes. The percentage of various soil aggregates, organic carbon content from density fractionations, and the proportion of organic carbon in the heavy fraction aggregates in farmland were significantly lower than that in grassland and forest soils. Soil aggregates in the uphill section of farmland were completely destroyed, and organic carbon content in various size aggregates and density fractionations gradually decreased with increasing slope. The proportion of organic carbon in the heavy fraction aggregates decreased, but that in light fraction aggregates increased gradually. Soil organic carbon and available potassium were key factors affecting aggregate stability, aggregate organic carbon content, and organic carbon content in density fractionations, while the loss of organic carbon in aggregate led to a decrease in aggregate stability. In summary, compared with grassland and forest soils, the stability of soil aggregates, the aggregate organic carbon content, the organic carbon content in density fractionations, and the proportion of organic carbon in heavy fraction aggregates in farmland all decreased in the wind erosion area of Northeast China. With the increases of slope, the aggregate organic carbon content, the organic carbon content in density fractionations, and the proportion of organic carbon in the heavy fraction aggregates in sloping farmland all decreased. Planting trees, conserving and expanding grassland area, and increasing the application of organic materials in sloping farmland in wind erosion area are effective approaches to stabilize and increase carbon storage, improve soil structure, and enhance soil quality.

Participation of strong charge-assisted hydrogen bonds in interactions of dissolved organic matter represented by Suwannee River Humic Acid.

Terrestrial dissolved organic matter (DOM) plays critical roles in many biotic and abiotic environmental reactions as well as in water treatment. Its structure is therefore of great interest. We examined dissolved Suwannee River Humic Acid (HA) to probe the potential participation of exceptionally strong, negative charge-assisted hydrogen bonds, (-)CAHB, in DOM cohesion and interaction with small weak acids using high performance size exclusion chromatography (HPSEC), transmission electron microscopy, zeta-pH curves, and pH drift experiments. The results support a previously proposed two-tier state of aggregation, in which tightly-knit primary particles (≤ ∼10 kDa) form larger secondary aggregates (up to micrometer in size). Evidence for (-)CAHB is gained through zeta potential changes and pH drift experiments. The primary particles interact with (-)CAHB-capable solutes (simple carboxylic acids and phosphate) but not (-)CAHB-incapable solutes. We identified disruption of intra-segmental and inter-molecular (-)CAHB leading to swelling and disaggregation, as well as formation of nouveau (-)CAHB with free groups on HA. The effects were solute-concentration dependent and greater at pH 5 than pH 6, consistent with CAHB theory. Phosphate induced the greatest shifts in the HPSEC molecular size distribution curves. The shifts were unaffected by prior stripping of innate polyvalent metals. We conclude that the (-)CAHB contributes to the cohesion of DOM, affecting its size and charge, and provides a means by which weak acid pollutants, nutrients, and natural compounds can interact with DOM. Such interactions have implications for the behavior of DOM in the environment, the fate and transport of anthropogenic pollutants, and the roles DOM play in water treatment technologies.

Microglia are not necessary for maintenance of blood-brain barrier properties in health, but PLX5622 alters brain endothelial cholesterol metabolism.

Microglia, the resident immune cells of the central nervous system, are intimately involved in the brain's most basic processes, from pruning neural synapses during development to preventing excessive neuronal activity throughout life. Studies have reported both helpful and harmful roles for microglia at the blood-brain barrier (BBB) in the context of disease. However, less is known about microglia-endothelial cell interactions in the healthy brain. To investigate the role of microglia at a healthy BBB, we used the colony-stimulating factor 1 receptor (CSF1R) inhibitor PLX5622 to deplete microglia and analyzed the BBB ultrastructure, permeability, and transcriptome. Interestingly, we found that, despite their direct contact with endothelial cells, microglia are not necessary for the maintenance of BBB structure, function, or gene expression in the healthy brain. However, we found that PLX5622 treatment alters brain endothelial cholesterol metabolism. This effect was independent from microglial depletion, suggesting that PLX5622 has off-target effects on brain vasculature.

Dissolved Organic Matter Contains Ketones Across a Wide Range of Molecular Formulas.

The carbonyl functionality of natural organic matter (NOM) is poorly constrained. Here, we treated Suwannee River NOM (SRNOM) with ammonium acetate and sodium cyanoborohydride to convert ketone-containing compounds by reductive amination to their corresponding primary amines. The total dissolved nitrogen content increased by up to 275% after amination. Up to 30% of the molecular formulas of SRNOM contained isomers with ketone functionalities as detected by ultrahigh-resolution mass spectrometry. Most of these isomers contained one or two keto groups. At least 3.5% of the oxygen in SRNOM was bound in ketone moieties. The conversion of reacted compounds increased linearly with O/H values of molecular formulas and was predictable from the elemental composition. The mean conversion rate of reacted compounds nearly followed a log-normal distribution. This distribution and the predictability of the proportion of ketone-containing isomers solely based on the molecular formula indicated a stochastic distribution of ketones across SRNOM compounds. We obtained isotopically labeled amines by using 15N-labeled ammonium acetate, facilitating the identification of reaction products and enabling NMR spectroscopic analysis. 1H,15N HSQC NMR experiments of derivatized samples containing less than 20 µg of nitrogen confirmed the predominant formation of primary amines, as expected from the reaction pathway.

Label-free ratiometric fluorescence detection of Pb2+via structure-specific fluorescent dyes and dual signal amplification.

Lead ions (Pb2+) are a widely distributed and highly toxic heavy metal pollutant, which seriously threatens the environment, economy and human safety. Here, a label-free ratiometric fluorescent biosensor was constructed for Pb2+ detection using DNAzyme-driven target cycling and exonuclease III (Exo III)-mediated DNA cycling as a dual signal amplification strategy. The SYBR Green I (SGI) and N-methyl mesoporphyrin IX (NMM) used in this study are characterized by low cost, storage resistance, and short preparation time compared with conventional signaling probes labeled with fluorescent groups. Unlike the single-emission fluorescence strategy, monitoring the fluorescence intensity ratio of SGI and NMM can effectively reduce external interference to achieve accurate detection of Pb2+. DNAzyme structures on the surface of magnetic beads (MBs) can recognize Pb2+ and activate the target circulatory system to cleave single-stranded DNA (ssDNA). The ssDNA further initiated the Exo III-assisted DNA circulatory system to digest double-stranded DNA (dsDNA) and release guanine-rich G1. Finally, the fluorescence signals of SGI and NMM were weakened and enhanced, respectively. The sensing strategy achieved a wide linear range from 0.5 to 500 nM and a low limit of detection (LOD) of 26.4 pM. Furthermore, its anti-interference ability and potential applicability for Pb2+ detection in actual samples were verified. This work ingeniously combines the dual signal amplification strategy with the ratiometric sensing strategy constructed by structure-specific fluorescent dyes, which provides a promising method for constructing sensitive and accurate fluorescent biosensors.

The lipid-amylose complexes enhance resistant starch content in candelilla wax-based oleogels cookies.

The substitution of margarine with candelilla wax (CW)-based oleogel is currently a prominent focus of research in the bakery industry. However, the use of CW-based oleogel in cookies increased starch digestibility, potentially posing a risk to human health. Thus, the anti-enzymatic mechanism of lipid-amylose complexes was used to evaluate the influence of olive diacylglycerol stearin (ODS) on starch digestibility in CW-based oleogel cookies. The in vitro digestibility analysis demonstrated that the DCW/ODS-35 cookie exhibited a increase of 27.72 % in slowly digestible starch (SDS) and resistant starch (RS) contents, compared to cookie formulated with margarine. The in-vivo glycemic index analysis revealed that the DCW/ODS-35 cookie had a medium glycemic index of 68. XRD pattern suggested that the presence of ODS in oleogels facilitated the formation of lipid-amylose complexes. The DSC analysis revealed that the addition of ODS resulted in the gelatinization enthalpy of DCW-based cookies increased from 389.9 to 3314.9 J/g. The FTIR spectra indicated that the combination of ODS could promote a short-range ordered structure in DCW-based cookies. Overall, these findings demonstrated that the utilization of DCW-based oleogel presented a viable alternative to commercial margarine in the development of CW-based cookies with reduced starch digestibility.

Preparation of soybean protein isolate-ester emulsifier oleogels and comparative study of their structure and properties.

In recent years, oleogel as a viscoelastic semi-solid to replace trans fatty acids and reduce saturated fatty acids in food has received more and more attention. Herein, an emulsion template method was used to produce soybean oil-based oleogels with seven different ester emulsifiers and soy protein isolate as oleogelators. The chemical and physical characteristics of oleogels produced via various crosslinking factors were comparatively examined. Results revealed that all oleogels generated ß-type needle crystals and exhibited high oil-holding capacity (>80 %), among which glycerol monolaurate G2 and diacetyl tartaric acid ester of mono-diglycerides G6 exhibited the strongest oil-holding capacity (96.6 % and 96.2 %, respectively). Furthermore, all oleogels exhibited strong thixotropic recovery, high thermal stability, as well as high gel strength (G' > G''). Of these, G2 and G6 exhibited the highest thixotropic recovery rates at 74.54 % and 78.19 %, respectively. Additionally, in accelerated oxidation trials, the peroxide value and thiobarbituric acid reactive substances of all oleogels had low oxidation rates, indicating high oxidative stability. These results contribute to a better understanding of oleogels for formulating trans-free and low-saturated foodstuffs with desired physical and functional properties.

Thermodynamics and explainable machine learning assist in interpreting biodegradability of dissolved organic matter in sludge anaerobic digestion with thermal hydrolysis.

Dissolved organic matter (DOM) is essential in biological treatment, yet its specific roles remain incompletely understood. This study introduces a machine learning (ML) framework to interpret DOM biodegradability in the anaerobic digestion (AD) of sludge, incorporating a thermodynamic indicator (λ). Ensemble models such as Xgboost and LightGBM achieved high accuracy (training: 0.90-0.98; testing: 0.75-0.85). The explainability of the ML models revealed that the features λ, measured m/z, nitrogen to carbon ratio (N/C), hydrogen to carbon ratio (H/C), and nominal oxidation state of carbon (NOSC) were significant formula features determining biodegradability. Shapley values further indicated that the biodegradable DOM were mostly formulas with λ lower than 0.03, measured m/z value higher than 600 Da, and N/C ratios higher than 0.2. This study suggests that a strategy based on ML and its explainability, considering formula features, particularly thermodynamic indicators, provides a novel approach for understanding and estimating the biodegradation of DOM.

Different impacts of natural and anthropogenic factors on dissolved organic matter chemistry in coastal rivers: Implications for water management.

The chemical composition of dissolved organic matter (DOM) exerts significant influence on aquatic energy dynamics, pollutant transportation, and carbon storage, thereby playing pivotal roles in the local water quality and regional-global biogeochemical cycling. However, the effects of natural climate change and local human activities on watershed characteristics and in-river processes have led to uncertainties regarding their contributions to DOM chemistry in coastal rivers, creating challenges for effective water management and the study of organic matter cycling. In this investigation, we employed a combination of stable isotopic analysis, optical techniques, and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) to elucidate the sources, optical properties, and molecular composition of DOM in three South China coastal rivers. Our results suggest that terrestrial DOM entering the three rivers through natural or anthropogenic pathways is gradually diluted by in situ primary production as it moves downstream, ultimately being influenced by seawater intrusion near the estuary. Additionally, terrestrial processes influenced by temperature likely govern DOC concentration, while seawater intrusion promotes the natural production of S-containing organic compounds. In contrast, human-altered landcover significantly impacts DOM molecular composition. Increased water areas lead to the enrichment of lignins with high disinfection byproduct formation potential, and agricultural residue burning appears to be the dominant source of pyrogenic DOM in these coastal rivers. Our distinct results suggest that the development of specific water management plans that consider the combined effects of temperature, seawater intrusion, landcover changes, and agricultural practices will be essential to ensure sustainable water resource.

What Is the Molecular Weight of "High" Molecular Weight Dissolved Organic Matter?

The use of ultrafiltration to isolate high molecular weight dissolved organic matter (HMWDOM) from seawater is a fundamental tool in the environmental organic chemist's toolbox. Yet, important characteristics of HMWDOM relevant to its origin and cycling, such as its molecular weight distribution, remain poorly defined. We used diffusion-ordered NMR spectroscopy coupled with mixed-mode chromatography to separate and characterize two major components of marine HMWDOM: acylpolysaccharides (APS) and high molecular weight humic substances (HS). The molecular weights (MWs) of APS and HS both fell within distinct, narrow envelopes; 2.0-16 kDa for APS and 0.9-6.5 kDa for HS. In water samples from the North Pacific Ocean the average MW of both components decreased with depth through the mesopelagic. However, the minimum MW of APS was >2 kDa, well above the molecular weight cutoff of the ultrafilter, suggesting APS removal processes below 2 kDa are highly efficient. The MW distribution of APS shows only small variations with depth, while the MW distribution of HS narrowed due to removal of HMW components. Despite the narrowing of the MW distribution, the concentration of HS did not decrease with depth between 15 and 915 m. This suggests that HMW HS produced in surface waters was either degraded into lower MW compounds without significant remineralization, or that HMW HS was remineralized but replaced by an additional source of HS in the mesopelagic ocean. Based on these results, we propose potential pathways for the production and removal of these major components of HMWDOM.

Interference of extracellular soluble algal organic matter on flocculation-sedimentation harvesting of Chlorella sp.

Extracellular soluble algal organic matter (AOM) significantly interferes with microalgae flocculation. This study investigated the effects of various AOM fractions on Chlorella sp. flocculation using ferric chloride (FeCl3), sodium hydroxide (NaOH), and chitosan. All flocculants achieved high separation efficiency (87-99 %), but higher dosages were required in the presence of AOM. High molecular weight (>50 kDa) AOM fraction was identified as the primary inhibitor of flocculation across different pH levels, whereas low/medium molecular weight (<3 and <50 kDa) AOM had minimal impact. Compositional analysis revealed that the inhibitory AOM fraction is a glycoprotein rich in carbohydrates, including neutral, amino, and acidic sugars. The significance of this study is in identifying carboxyl groups (-COOH) from acidic monomers in >50 kDa AOM that inhibit flocculation. Understanding AOM composition and the interaction dynamics between AOM, cells, and flocculants is crucial for enhancing the techno-economics and sustainability of flocculation-based microalgae harvesting.

A potential therapeutic strategy of an innovative probiotic formulation toward topical treatment of diabetic ulcer: an in vivo study.

BACKGROUND: The probiotic potential of Lacticacid bacteria has been studied in various medical complications, from gastrointestinal diseases to antibiotic resistance infections recently. Moreover, diabetic ulcer (DU) is known as one of the most significant global healthcare concerns, which comprehensively impacts the quality of life for these patients. Given that the conventional treatments of DUs have failed to prevent later complications completely, developing alternative therapies seems to be crucial. METHODS: We designed the stable oleogel-based formulation of viable probiotic cells, including Lactobacillus rhamnosus (L. rhamnosus), Lactobacillus casei (L. casei), Lactobacillus fermentum (L. fermentum), and Lactobacillus acidophilus (L. acidophilus) individually to investigate their effect on wound healing process as an in vivo study. The wound repair process was closely monitored regarding morphology, biochemical, and histopathological changes over two weeks and compared it with the effects of topical tetracycline as an antibiotic approach. Furthermore, the antibiofilm activity of probiotic bacteria was assessed against some common pathogens. RESULTS: The findings indicated that all tested lactobacillus groups (excluded L. casei) included in the oleogel-based formulation revealed a high potential for repairing damaged skin due to the considerably more levels of hydroxyproline content of tissue samples along with the higher numerical density of mature fibroblasts cell and volume density of hair follicles, collagen fibrils, and neovascularization in comparison with antibiotic and control groups. L. acidophilus and L. rhamnosus showed the best potential of wound healing among all lactobacillus species, groups treated by tetracycline and control groups. Besides, L. rhamnosus showed a significant biofilm inhibition activity against tested pathogens. CONCLUSIONS: This experiment demonstrated that the designed formulations containing probiotics, particularly L. acidophilus and L. rhamnosus, play a central role in manipulating diabetic wound healing. It could be suggested as an encouraging nominee for diabetic wound-healing alternative approaches, though further studies in detailed clinical trials are needed.

Understanding Variations in Ferrate Detection through the ABTS Method in the Presence of Electron-Rich Organic Compounds.

The chromogenic reaction between 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) and ferrate [Fe(VI)] has long been utilized for Fe(VI) content measurement. However, the presence of electron-rich organic compounds has been found to significantly impact Fe(VI) detection using the ABTS method, leading to relative errors ranging from ∼88 to 100%. Reducing substances consumed ABTS•+ and resulted in underestimated Fe(VI) levels. Moreover, the oxidation of electron-rich organics containing hydroxyl groups by Fe(VI) could generate a phenoxyl radical (Ph•), promoting the transformation of Fe(VI) → Fe(V) → Fe(IV). The in situ formation of Fe(IV) can then contribute to ABTS oxidation, altering the ABTS•+:Fe(VI) stoichiometry from 1:1 to 2:1. To overcome these challenges, we introduced Mn(II) as an activator and 3,3',5,5'-tetramethylbenzidine (TMB) as a chromogenic agent for Fe(VI) detection. This Mn(II)/TMB method enables rapid completion of the chromogenic reaction within 2 s, with a low detection limit of approximately 4 nM and a wide detection range (0.01-10 µM). Importantly, the Mn(II)/TMB method exhibits superior resistance to reductive interference and effectively eliminates the impact of phenoxyl-radical-mediated intermediate valence iron transfer processes associated with electron-rich organic compounds. Furthermore, this method is resilient to particle interference and demonstrates practical applicability in authentic waters.

Phase inversion regulable bigels co-stabilized by Chlorella pyrenoidosa protein and beeswax: In-vitro digestion and food 3D printing.

Algal proteins are an emerging source of functional foods. Herein, Chlorella pyrenoidosa protein (CPP)/xanthan gum-based hydrogels (HG) and beeswax-gelled oleogels (OG) are adopted to fabricate bigels. The phase inversion of bigels can be regulated by the ratio of OG and HG: As the OG increased, bigels turn from OG-in-HG (OG/HG) to a semicontinuous state and then HG-in-OG (HG/OG). In OG/HG bigels (OG ≤ 50 %), hydrophilic CPP acts as the emulsifier at the interface of OG and HG, while beeswax emulsifies the system in HG/OG bigels (OG = 80 %). A semicontinuous bigel appears during the transition between HG/OG and OG/HG. The increase of OG can enhance the viscoelasticity, hardness, adhesiveness, chewiness, and thermal stability. OG/HG bigels exhibit stronger thixotropic recovery and oil-holding capacity than HG/OG bigels. In the in-vitro digestion and food 3D printing, the high specific surface area and the highest thixotropic recovery caused by the emulsion structure of the OG/HG bigel (OG = 50 %) are conducive to the release of free fatty acids and molding of 3D-printed objects, respectively. This study provides a new approach to structure the gelled water-oil system with CPP and helps to develop edible algal proteins-based multiphase systems in food engineering or pharmacy.