Adsorption removal of mercury from flue gas by metal selenide: A review.

Mercury (Hg) pollution has been a global concern in recent decades, posing a significant threat to entire ecosystems and human health due to its cumulative toxicity, persistence, and transport in the atmosphere. The intense interaction between mercury and selenium has opened up a new field for studying mercury removal from industrial flue gas pollutants. Besides the advantages of good Hg° capture performance and low secondary pollution of the mineral selenium compounds, the most noteworthy is the relatively low regeneration temperature, allowing adsorbent regeneration with low energy consumption, thus reducing the utilization cost and enabling recovery of mercury resources. This paper reviews the recent progress of mineral selenium compounds in flue gas mercury removal, introduces in detail the different types of mineral selenium compounds studied in the field of mercury removal, reviews the adsorption performance of various mineral selenium compounds adsorbents on mercury and the influence of flue gas components, such as reaction temperature, air velocity, and other factors, and summarizes the adsorption mechanism of different fugitive forms of selenium species. Based on the current research progress, future studies should focus on the economic performance and the performance of different carriers and sizes of adsorbents for the removal of Hg0 and the correlation between the gas-particle flow characteristics and gas phase mass transfer with the performance of Hg0 removal in practical industrial applications. In addition, it remains a challenge to distinguish the oxidation and adsorption of Hg0 quantitatively.

Effect of Selol on Tumor Morphology and Biochemical Parameters Associated with Oxidative Stress in a Prostate Tumor-Bearing Mice Model.

Prostate cancer is the leading cause of cancer death in men. Some studies suggest that selenium Se (+4) may help prevent prostate cancer. Certain forms of Se (+4), such as Selol, have shown anticancer activity with demonstrated pro-oxidative effects, which can lead to cellular damage and cell death, making them potential candidates for cancer therapy. Our recent study in healthy mice found that Selol changes the oxidative-antioxidative status in blood and tissue. However, there are no data on the effect of Selol in mice with tumors, considering that the tumor itself influences this balance. This research investigated the impact of Selol on tumor morphology and oxidative-antioxidative status in blood and tumors, which may be crucial for the formulation's effectiveness. Our study was conducted on healthy and tumor-bearing animal models, which were either administered Selol or not. We determined antioxidant enzyme activities (Se-GPx, GPx, GST, and TrxR) spectrophotometrically in blood and the tumor. Furthermore, we measured plasma prostate-specific antigen (PSA) levels, plasma and tumor malondialdehyde (MDA) concentration as a biomarker of oxidative stress, selenium (Se) concentrations and the tumor ORAC value. Additionally, we assessed the impact of Selol on tumor morphology and the expression of p53, BCL2, and Ki-67. The results indicate that treatment with Selol influences the morphology of tumor cells, indicating a potential role in inducing cell death through necrosis. Long-term supplementation with Selol increased antioxidant enzyme activity in healthy animals and triggered oxidative stress in cancer cells, activating their antioxidant defense mechanisms. This research pathway shows promise in understanding the anticancer effects of Selol. Selol appears to increase the breakdown of cancer cells more effectively in small tumors than in larger ones. In advanced tumors, it may accelerate tumor growth if used as monotherapy. Therefore, further studies are necessary to evaluate its efficacy either in combination therapy or for the prevention of recurrence.

Changes in microbial communities during high-rate microbial selenate reduction in an up-flow anaerobic fluidized bed reactor.

Biological fluidized bed reactor (FBR) is a promising treatment option for removing selenium oxyanions from wastewater by converting them into elemental selenium. The process can achieve high rates and be efficiently operated at low hydraulic retention times (HRT). However, the effects of HRT on the changes in microbial community in the FBR process have not been previously explored. In this study, dynamic changes of microbial communities both on biofilm carrier and in suspension of a selenate-reducing FBR were explored at various HRTs (0.3-120 h). Based on partial 16S rRNA gene sequencing of the microbial communities, alpha diversity of microbial communities in suspension rather than in the biofilm were impacted by low HRTs (0.3 h-3 h). Members from genera Geobacter, Geoalkalibacter, and Geovibrio were the main selenate-reducing bacteria on carrier throughout the FBR process. Genus Geobacter was dominant in FBR carrier at HRT of 24 h-120 h, whereas Geoalkalibacter and Geovibrio dominated at low HRT of 0.3 h-6 h. Suspended microbial communities detected in the FBR effluent were more sensitive to HRT changes than that in biofilm. "Shock loading" at HRT of 0.3 h had a great impact on microbial community compositions both in the biofilm and effluent. Reactor operation in batch mode and long HRT of 24 h helped recover the community from "shock loading" and improved selenite reduction and ethanol oxidation. Redundancy analysis revealed that HRT, influent pH and selenate loading were key operational parameters impacting both the FBR performance and the composition of microbial communities associated with both the FBR carrier and effluent. Overall, the microbial communities in FBR biofilm flexibly responded to the changes of HRT and showed resilience to the temporary shock loading, enabling efficient selenate removal.

Ultra-sensitive electrochemical immunosensor based on 2D vanadium diselenide (VSe2) for efficient detection of pathogens: Salmonella Typhimurium.

Layered transition metal dichalcogenides (TMDs), with an extensive surface area, intriguing tunable electrical and optical features, and a distinctive Van der Waals layered structure, yield outstanding sensing properties. Essentially, most TMDs originally existed in the crystallographic phase of a 2H trigonal prismatic structure, which is semiconducting in nature with poor electrocatalytic activity. In contrast, vanadium diselenide (VSe2) with its metastable metallic 1 T octahedral crystal structure has been proven to be an outstanding electrode material, embracing exceptional electrocatalytic behavior for various electrochemical (EC) applications. However, practically, VSe2 has hardly ever been explored in the field of biosensing technology. This study presents a novel EC biosensor based on the antibody of Salmonella Typhimurium (Anti-ST) immobilized on VSe2-supported Indium tin oxide (Anti-ST/VSe2/ITO) for quantitative and efficient Salmonella Typhimurium (ST) detection. The Anti-ST/VSe2/ITO bioelectrode displayed a linear relationship with ST concentration (1.3 × 10-107 CFU/ml) with a limit of detection (LOD) (0.096 CFU/ml) that is lower than previously reported ST biosensors and impressively high sensitivity (0.001996 µA.mL/CFU). Furthermore, the proposed electrode's electroanalytical activity was evaluated in spiked sugarcane juice, demonstrating distinguished applicability for specific ST detection in real samples.

Microbial Fabrication of Quantum Dots: Mechanism and Applications.

More recently, the application of semiconductor nanomaterials called quantum dots (QDs), has gained considerable attention as they possess tunable optoelectronic and physicochemical properties. There are several routes of QDs synthesis some of which include lithography, molecular beam epitaxy, and chemical reduction. However, most of these methods are expensive, labour intensive, and produce toxic by-products. Hence, the biosynthesis of QDs has been extensively researched for addressing the issues. This review elaborates on the biogenic synthesis of cadmium selenide, cadmium telluride, cadmium sulfide, lead sulfide, and zinc sulfide QDs using bacteria, and fungi. Further, we attempt to identify the underlying mechanism and critical parameters that can control the synthesis of QDs. Eventually, their application in detectors, photovoltaics, biodiesel, photocatalysis, infection-control, and bioimaging are discussed. Thus, biogenic QDs have a tremendous scope in future to emerge as next generation nanotheranostics although thorough pharmacokinetic, and pharmacodynamic studies are required.

Fast Intramolecular Thiol-Activated Arylselenoamides Provide Access to Triggered, Fluorogenic H2Se Donors.

H2Se is the precursor for the biosynthesis of selenocompounds and is a potential gasotransmitter. Chemical tools for H2Se delivery and detection are important for Se-related biology research. Key challenges in the field include developing compound platforms that are triggered to release H2Se under various stimuli and developing fluorogenic donors that allow for real-time tracking of H2Se delivery. Here we report a new general platform for triggered H2Se donors based on controllable deprotection of a thiol, which can quickly activate an intramolecular arylselenoamide (t1/2 < 1 min) to release H2Se efficiently. Furthermore, we leverage this platform to develop the first examples of fluorogenic H2Se donors, which can be used to monitor H2Se release by fluorescence in real time. We anticipate that the well-defined donation chemistries will significantly advance the development of H2Se donors and stimulate further in-depth studies of H2Se biomedicine.

An Examination of Chemical Tools for Hydrogen Selenide Donation and Detection.

Hydrogen selenide (H2Se) is an emerging biomolecule of interest with similar properties to that of other gaseous signaling molecules (i.e., gasotransmitters that include nitric oxide, carbon monoxide, and hydrogen sulfide). H2Se is enzymatically generated in humans where it serves as a key metabolic intermediate in the production of selenoproteins and other selenium-containing biomolecules. However, beyond its participation in biosynthetic pathways, its involvement in cellular signaling or other biological mechanisms remains unclear. To uncover its true biological significance, H2Se-specific chemical tools capable of functioning under physiological conditions are required but lacking in comparison to those that exist for other gasotransmitters. Recently, researchers have begun to fill this unmet need by developing new H2Se-releasing compounds, along with pioneering methods for selenide detection and quantification. In combination, the chemical tools highlighted in this review have the potential to spark groundbreaking explorations into the chemical biology of H2Se, which may lead to its branding as the fourth official gasotransmitter.

Generation and Coupling of Radical Species from α-Alkoxy Bridgehead Carboxylic Acid, Selenide, Telluride, Acyl Selenide, and Acyl Telluride.

α-Alkoxy bridgehead radicals enable intermolecular construction of sterically congested C-C bonds due to their sterically accessible nature. We implemented these radical species into total syntheses of various densely oxygenated natural products and demonstrated their exceptional versatility. Herein, we employed different precursors to generate the same α-alkoxy bridgehead radical and compared the efficacy of the precursors for coupling reactions. Specifically, the bridgehead radical of the trioxaadamantane structure was formed from α-alkoxy carboxylic acid, selenide/telluride, and acyl selenide/acyl telluride, and reacted with 4-((tert-butyldimethylsilyl)oxy)cyclopent-2-en-1-one and 5-oxo-1-cyclopentene-1-carbonitrile. The efficiency of the bridgehead radical formation and subsequent coupling reaction significantly depended on the structures of the precursors and acceptors as well as the reaction conditions. Our findings provide new insights for selecting the appropriate substrates of key coupling reactions in the total synthesis of complex natural products.

An ultrasensitive dual-mode stagey for 17ß-estradiol assay: Photoelectrochemical and colorimetric biosensor based on a WSe2/TiO2-modified electrode coupled with nucleic acid amplification.

BACKGROUND: The abuse of 17ß-estradiol(E2) has aroused wide concern in environmental and biomedical fields, which severely affects the endocrine function of human and animals. Therefore, an ultrasensitive and accurate assay of E2 is critically important. Traditional chromatography or immunoassay techniques exhibited good sensitivity and selectivity, but expensive instruments and antibodies may pose cost and stability issues, as well as difficulties in meeting on-site detection requirements. Ultrasensitive, reliable, and on-site detection of E2 at trace level remains a challenge. Hence, developing a simple, ultrasensitive assay to simultaneously achieve accurate detection and rapid visual analysis of E2 is extremely crucial. RESULTS: We developed a versatile dual-mode photoelectrochemical (PEC) and colorimetric biosensor based on isothermal nucleic acid amplification strategy for the ultrasensitive and accurate detection of E2. The method modified titanium dioxide (TiO2) with tungsten selenide (WSe2) nanoflowers to synthesize WSe2/TiO2 heterostructures as a substrate for signal amplification and nanoprobe modification. Isothermal nucleic acid amplification strategy has been proven to be a powerful tool for strong signal amplification. The presence of a target triggered the nucleic acid amplification reaction, and produced a large amount of tDNA that competed with G-quadruplex immobilized on the electrode surface. The remaining G-quadruplex/hemin catalyzed the 4-chloro-1-naphthol (4-CN) to form biocatalytic precipitation (BCP) and ABTS-H2O2 chromogenic reaction, thus, the dual-mode platform was capable of achieving PEC-colorimetric ultrasensitive detection based on the catalytic activity of G-quadruplex/hemin DNAzyme. Within optimal conditions, the dual-mode biosensor exhibited a remarkable detection limit as low as 0.026 pM. SIGNIFICANCE: Benefiting from the superior performance of WSe2/TiO2 and the power signal amplification of isothermal nucleic acid amplification strategy, this aptasensor achieved the ultrasensitive detection of E2. The independent transmission paths of photoelectrochemical and colorimetric provide mutual support and flexible switching, significantly enhancing the overall sensitivity and accuracy of the detection strategy, which can meet the needs for E2 precise quantification and rapid on-site detection.

The effect of hydroxy-selenomethionine on the productive and reproductive performance of old broiler breeders.

BACKGROUND: Selenium (Se) is a rare essential element that plays a vital role in the health and performance of animals. By interfering in the production of antioxidant enzymes such as glutathione peroxidase, thioredoxin reductase and methionine sulfoxide, Se plays a role in reducing the effects of oxidative stress and animal performance. OBJECTIVES: This study aimed to investigate the effect of hydroxy-selenomethionine (OH-SeMet) in the diet of broiler breeder and old broiler breeder roosters on productive performance, reproduction and sperm quality parameters. METHODS: For this purpose, 260 broiler breeders of the Ross 308 strain were used in a completely randomized design with four treatments and five replications (13 hens and one rooster in each replication). Experimental treatments included: (1) a basal diet without OH-SeMet (T1:control), (2) a broiler breeder diet without OH-SeMet and a rooster diet containing 0.1 mg/kg OH-SeMet (T2), (3) broiler breeder diet containing 0.1 mg/kg OH-SeMet and rooster diet without OH-SeMet (T3) and (4) broiler breeder and rooster diet contained 0.1 mg/kg OH-SeMet (T4). RESULTS: The results showed that T3 and T4 treatments improved egg production, egg weight, egg mass and feed conversion ratio (FCR) compared to the control treatment (p < 0.05). The fertility and hatchability percentages of T4 and T2 treatments increased compared to T1 and T3 treatments (p < 0.05). The rate of embryonic losses in T1 was higher than in other treatments. However, grade one chickens were higher in T4 than in other treatments (p < 0.05). Total motility and viability of sperms were significantly higher in T2 and T4 treatments than in T1 and T3 treatments. The sperm abnormality percentage and sperm MDA concentration decreased in T2 and T4 treatments. CONCLUSIONS: Therefore, using OH-SeMet may be a practical approach to help old broiler breeders' production and reproduction performance.

An investigation of quantum dot theranostic probes for prostate and leukemia cancer cells using a CdZnSeS QD-based nanoformulation.

Anticancer theranostic nanocarriers have the potential to enhance the efficacy of pharmaceutical evaluation of drugs. Semiconductor nanocrystals, also known as quantum dots (QDs), are particularly promising components of drug carrier systems due to their small sizes and robust photoluminescence properties. Herein, bright CdZnSeS quantum dots were synthesized in a single step via the hot injection method. The particles have a quasi-core/shell structure as evident from the high quantum yield (85 %), which decreased to 41 % after water solubilization. These water solubilized QDs were encapsulated into gallic acid / alginate (GA-Alg) matrices to fabricate imaging QDs@mod-PAA/GA-Alg particles with enhanced stability in aqueous media. Cell viability assessments demonstrated that these nanocarriers exhibited viability ranging from 63 % to 83 % across all tested cell lines. Furthermore, the QDs@mod-PAA/GA-Alg particles were loaded with betulinic acid (BA) and ceranib-2 (C2) for in vitro drug release studies against HL-60 leukemia and PC-3 prostate cancer cells. The BA loaded QDs@mod-PAA/GA-Alg had a half-maximal inhibitory concentration (IC50) of 8.76 µg/mL against HL-60 leukemia cells, which is 3-fold lower than that of free BA (IC50 = 26.55 µg/mL). Similar enhancements were observed with nanocarriers loaded with C2 and simultaneously with both BA and C2. Additionally, BA:C2 loaded QDs@mod-PAA/GA-Alg nanocarriers displayed a similar enhancement (IC50 = 3.37 µg/mL compared against IC50 = 11.68 µg/mL for free BA:C2). The C2 loaded QDs@mod-PAA/GA-Alg nanocarriers had an IC50 = 2.24 µg/mL against HL-60 cells. C2 and BA loaded QDs@mod-PAA/GA-Alg NCr had IC50 values of 7.37 µg/mL and 24.55 µg/mL against PC-3 cells, respectively.

Protein desulfurization and deselenization.

Methods enabling the dechalcogenation of thiols or selenols have been investigated and developed for a long time in fields of research as diverse as the study of prebiotic chemistry, the engineering of fuel processing techniques, the study of biomolecule structures and function or the chemical synthesis of biomolecules. The dechalcogenation of thiol or selenol amino acids is nowadays a particularly flourishing area of research for being a pillar of modern chemical protein synthesis, when used in combination with thiol or selenol-based chemoselective peptide ligation chemistries. This review offers a comprehensive and scholarly overview of the field, emphasizing emerging trends and providing a detailed and critical mechanistic discussion of the dechalcogenation methods developed so far. Taking advantage of recently published reports, it also clarifies some unexpected desulfurization reactions that were observed in the past and for which no explanation was provided at the time. Additionally, the review includes a discussion on principal desulfurization methods within the framework of newly introduced green chemistry metrics and toolkits, providing a well-rounded exploration of the subject.

Fluorescence detection of valence speciation of Cr(III) based on the catechol oxidase mimic enzyme activity of CuSeNP nanozymes.

Copper selenide nanoparticles (CuSeNP) were synthesized using histidine, ethylenediamine, and sodium selenate as precursors by one-step microwave digestion methods. The as-prepared CuSeNPs exhibit excellent catechol oxidase mimic enzyme and catalase (CAT)-like activities. Dopamine (DA) can be oxidized to aminochrome with H2O2 by CuSeNPs, and the intermediate product aminochrome can further react with α-naphthol to yield a highly fluorescent derivative. It was confirmed that Cr(III) could adsorb on the surface of CuSeNPs and inhibit the production of semiquinone radicals in the reaction system, and the catalytic activity of CuSeNPs was inhibited. The detection mechanisms, kinetics, and catalytic properties of CuSeNPs were systematically investigated. As a result, a novel fluorescence method for the assay of Cr(III) was established. The feasibility of CuSeNP nanozyme in detecting speciation Cr(III) in food samples was explored with satisfactory results. It showed the obvious potential for developing effective and dependable fluorescent detection method for protecting food safety.

Comparison of toxic effects and underlying mechanisms of carbon quantum dots and CdSe quantum dots on Chromochloris zofingiensis from the chemical composition perspective.

Quantum dots (QDs) are widely utilized semiconductor nanocrystal materials with both nanotoxicity and composition-related toxicity. To determine the toxicological impacts and underlying mechanisms of QDs with different compositions on microalgae, carbon QDs (CQDs) and CdSe QDs were used in the present study. Results showed that QDs composed of CdSe were more toxic than QDs composed of carbon, which inhibited cell growth, with reductions in chl b content, chlorophyll fluorescence parameters, and increases in lipids and starch (two major storage substances). In addition, CdSe QDs elevated reactive oxygen species (ROS), resulting in oxidative damage, while CQDs had little effect on antioxidants. Comparative transcriptome analysis showed that gene expression was accelerated by CdSe QDs, and there was a compensatory upregulation of porphyrin metabolism, potentially to support chlorophyll synthesis. In addition, an MYB transcription factor was predicted by weighted gene co-expression network analysis (WGCNA) to serve as regulator in nanoparticle toxicity, while glutathione peroxidase (GPX) and dual-specificity tyrosine phosphorylation regulated kinases 2/3/4 (DYRK2/3/4) may be key mediators of the composition-related toxicity of CdSe QDs. This study highlights the critical role of QDs' composition in determining their impacts on aquatic microalgae, providing a theoretical reference for selecting appropriate QDs materials for various industrial applications.

Closed Bipolar Nanoelectrode Array for Ultra-Sensitive Detection of Alkaline Phosphatase and Two-Dimensional Imaging of Epidermal Growth Factor Receptors.

The combination of closed bipolar electrodes (cBPE) with electrochemiluminescence (ECL) imaging has demonstrated remarkable capabilities in the field of bioanalysis. Here, we established a cBPE-ECL platform for ultrasensitive detection of alkaline phosphatase (ALP) and two-dimensional imaging of epidermal growth factor receptor (EGFR). This cBPE-ECL system consists of a high-density gold nanowire array in anodic aluminum oxide (AAO) membrane as the cBPE coupled with ECL of highly luminescent cadmium selenide quantum dots (CdSe QDs) luminophores to achieve cathodic electro-optical conversion. When an enzyme-catalyzed amplification effect of ALP with 4-aminophenyl phosphate monosodium salt hydrate (p-APP) as the substrate and 4-aminophenol (p-AP) as the electroactive probe is introduced, a significant improvement of sensing sensitivity with a detection limit as low as 0.5 fM for ALP on the cBPE-ECL platform can be obtained. In addition, the cBPE-ECL sensing system can also be used to detect cancer cells with an impressive detection limit of 50 cells/mL by labeling ALP onto the EGFR protein on A431 human epidermal cancer cell membranes. Thus, two-dimensional (2D) imaging of the EGFR proteins on the cell surface can be achieved, demonstrating that the established cBPE-ECL sensing system is of high resolution for spatiotemporal cell imaging.

Light-Driven Electrochemical Biosensing with DNA Origami-Assisted Hybrid Nanoantenna for Fumonisin B1 Monitoring.

The electrochemical detection of biosensors is largely governed by the changes in physical properties of redox probes, which are susceptible to electrode substrate effects, inhibiting sensor sensitivity. In this work, a light-driven electrochemical biosensor based on a hybrid nanoantenna was developed for the sensitive detection of fumonisin B1 (FB1). The hybrid nanoantenna sensing interface was constructed by coupling CdSe quantum dots (QDs)-DNA nanowire and graphdiyne oxide composites loaded with methylene blue and gold nanorods (GDYO-MB-Au NRs) using a tetrahedral DNA nanostructure, which acted as a light-driven unit and an amplification unit, respectively. The hybrid nanoantenna with light-driven properties facilitated the alteration in the chemical properties of MB at the sensing interface; that is, MB was degraded under light illumination. The stripping of the CdSe QDs-DNA nanowire triggered by the binding of FB1 could degrade the light-driven capability, thereby improving the electrochemical signal through depressing MB degradation. Taking advantage of the photodegradation of MB by the hybrid nanoantenna, the developed biosensor reduced the background signal and increased the detection sensitivity. The developed biosensor exhibited a linear detection range from 0.5 fg mL-1 to 10 pg mL-1 and a detection limit down to 0.45 fg mL-1. This strategy shows great promise for the fabrication of highly sensitive electrochemical biosensors.

Recent research progress of selenotungstate-based biomolecular sensing materials.

Polyoxometalates (POMs) have drawn significant attention on account of their structural designability, compositional diversity and great potential applications. As an indispensable branch of POMs, selenotungstates (SeTs) have been synthesized extensively. Some SeTs have been applied as sensing materials for detecting biomarkers (e.g., metabolites, hormones, cancer markers). To gain a comprehensive understanding of advancements in SeT-based sensing materials, we present an overview that encapsulates the sensing performances and mechanisms of SeT-based biosensors. SeT-based biosensors are categorized into electrochemical catalytic biosensors, electrochemical affinity biosensors, "turn-off" fluorescence biosensors and "turn-on" fluorescence biosensors. We anticipate the expansive potential of SeT-based biosensors in wearable and implantable sensing technologies, which promises to catalyze significant breakthroughs in SeT-based biosensors.

A sandwich-type photoelectrochemical biosensor based on Ru(bpy)32+ sensitized In2S3 for aflatoxin B1 detection.

Aflatoxin B1 (AFB1), classified as a class I carcinogen, is a widespread mycotoxin that poses a serious threat to public health and economic development, and the food safety problems caused by AFB1 have aroused worldwide concern. The development of accurate and sensitive methods for the detection of AFB1 is significant for food safety monitoring. In this work, a sandwich-type photoelectrochemical (PEC) biosensor for AFB1 detection was constructed on the basis of an aptamer-antibody structure. A good photocurrent response was obtained due to the sensitization of In2S3 by Ru(bpy)32+. In addition, this sandwich-type sensor constructed by modification with the antibody, target detector, and aptamer layer by layer attenuated the migration hindering effect of photogenerated carriers caused by the double antibody structure. The aptamer and antibody synergistically recognized and captured the target analyte, resulting in more reliable PEC response signals. CdSe@CdS QDs-Apt were modified as a signal-off probe onto the sensor platform to quantitatively detect AFB1 with a "signal-off" response, which enhanced the sensitivity of the sensor. The PEC biosensor showed a linear response range from 10-12 to 10-6 g mL-1 with a detection limit of 0.023 pg mL-1, providing a feasible approach for the quantitative detection of AFB1 in food samples.

Electrochemical biosensor for sensitive detection of SARS-CoV-2 gene fragments using Bi2Se3 topological insulator.

In this study, we have designed an electrochemical biosensor based on topological material Bi2Se3 for the sensitive detection of SARS-CoV-2 in the COVID-19 pandemic. Flake-shaped Bi2Se3 was obtained directly from high-quality single crystals using mechanical exfoliation, and the single-stranded DNA was immobilized onto it. Under optimal conditions, the peak current of the differential pulse voltammetry method exhibited a linear relationship with the logarithm of the concentration of target-complementary-stranded DNA, ranging from 1.0 × 10-15 to 1.0 × 10-11 M, with a detection limit of 3.46 × 10-16 M. The topological material Bi2Se3, with Dirac surface states, enhanced the signal-to-interference plus noise ratio of the electrochemical measurements, thereby improving the sensitivity of the sensor. Furthermore, the electrochemical sensor demonstrated excellent specificity in recognizing RNA. It can detect complementary RNA by amplifying and transcribing the initial DNA template, with an initial DNA template concentration ranging from 1.0 × 10-18 to 1.0 × 10-15 M. Furthermore, the sensor also effectively distinguished negative and positive results by detecting splitting-synthetic SARS-CoV-2 pseudovirus with a concentration of 1 copy/µL input. Our work underscores the immense potential of the electrochemical sensing platform based on the topological material Bi2Se3 in the detection of pathogens during the rapid spread of acute infectious diseases.

Solution-Processed, Surface-Engineered, Polycrystalline CdSe-SnSe Exhibiting Low Thermal Conductivity.

In recent years, solution processes have gained considerable traction as a cost-effective and scalable method to produce high-performance thermoelectric materials. The process entails a series of critical steps: synthesis, purification, thermal treatments, and consolidation, each playing a pivotal role in determining performance, stability, and reproducibility. We have noticed a need for more comprehensive details for each of the described steps in most published works. Recognizing the significance of detailed synthetic protocols, we describe here the approach used to synthesize and characterize one of the highest-performing polycrystalline p-type SnSe. In particular, we report the synthesis of SnSe particles in water and the subsequent surface treatment with CdSe molecular complexes that yields CdSe-SnSe nanocomposites upon consolidation. Moreover, the surface treatment inhibits grain growth through Zenner pinning of secondary phase CdSe nanoparticles and enhances defect formation at different length scales. The enhanced complexity in the CdSe-SnSe nanocomposite microstructure with respect to SnSe promotes phonon scattering and thereby significantly reduces the thermal conductivity. Such surface engineering provides opportunities in solution processing for introducing and controlling defects, making it possible to optimize the transport properties and attain a high thermoelectric figure of merit.