Identification and evaluation of Escherichia coli strain ATCC 8739 as a surrogate for thermal inactivation of enterohemorrhagic Escherichia coli in fruit nectars: Impact of applied techniques on the decimal reduction time.

The objective of this study was to identify a suitable surrogate for E. coli O157:H7 strain 19685/91 and O113:H21 strain TS18/08, by assessing their thermal resistance at temperatures of 60 °C, 65 °C, and 72 °C in strawberry nectar. The influence of the matrix and the research methodology on the decimal reduction time (D-value) was investigated. Thermal kinetics and safety assessment demonstrated that E. coli ATCC 8739 is a suitable surrogate. The study demonstrated that the presence of fruit particles in the nectar increased thermal resistance of the tested strains. Variations in D-values were observed depending on the research method employed, with D-values in glass capillaries were up to 6.6 times lower compared to larger sample volumes. Encapsulation of E. coli ATCC 8739 exhibited high efficiency of 90.25 ± 0.26% and maintained stable viable counts after 26 days of storage in strawberry nectar at 4 °C. There were no significant differences in thermal resistance between surrogates directly inoculated into strawberry nectar and those encapsulated in alginate beads. Additionally, the encapsulated strains did not migrate outside the beads. Therefore, encapsulated E. coli ATCC 8739 in alginate beads can be effectively utilized in industrial settings to validate thermal treatments as a reliable and safe method.

The effect of 3D printing speed and temperature on transferability of Staphylococcus aureus and Escherichia coli during 3D food printing.

The current study aimed to determine if the 3D-printing speed and temperature would impact the transferability of foodborne pathogens from the stainless-steel (SS) food cartridge to the 3D-printed food ink. Staphylococcus aureus and Escherichia coli were inoculated onto the interior surface of the SS food cartridges. Subsequently, a model food ink was extruded with a recommended macronutrient contribution of 55.8, 23.7, and 20.5% of carbohydrates, proteins, and fat, respectively. The impact of 3D-printing temperatures and speeds on transfer rates was analysed using a Two-Way ANOVA. S. aureus was transferred more from the cartridge to the food ink with a population of 3.39, 2.98, and 3.09 log CFU/g compared to 2.03, 2.06, and 2.00 log CFU/g for E. coli at 2000, 3000, and 4000 mm/s printing speed, respectively, at 25 °C. A Kruskal-Wallis Test was employed to investigate the effect of different speeds and temperatures on the transferability of S. aureus and E. coli. Speed was the main factor affecting S. aureus transferability, while temperature (25 and 50 °C) had the greatest impact on E. coli transferability. This research seeks to advance the understanding of 3D-printing parameters in pathogen transferability and help the food industry move towards this technology's quick and safe adoption.

The Gamma concept approach as a tool to predict fresh produce supporting or not the growth of L. monocytogenes.

Challenge tests are commonly employed to evaluate the growth behavior of L. monocytogenes in food matrices; they are known for being expensive and time-consuming. An alternative could be the use of predictive models to forecast microbial behavior under different conditions. In this study, the growth behavior of L. monocytogenes in different fresh produce was evaluated using a predictive model based on the Gamma concept considering pH, water activity (aw), and temperature as input factors. An extensive literature search resulted in a total of 105 research articles selected to collect growth/no growth behavior data of L. monocytogenes. Up to 808 L. monocytogenes behavior values and physicochemical characteristics were extracted for different fruits and vegetables. The predictive performance of the model as a tool for identifying the produce commodities supporting the growth of L. monocytogenes was proved by comparing with the experimental data collected from the literature. The model provided satisfactory predictions on the behavior of L. monocytogenes in vegetables (>80% agreement with experimental observations). For leafy greens, a 90% agreement was achieved. In contrast, the performance of the Gamma model was less satisfactory for fruits, as it tends to overestimate the potential of acid commodities to inhibit the growth of L. monocytogenes.

The synergistic bactericidal effect of simultaneous 222 nm krypton-chlorine excilamp and 307 nm UVB light treatment on sliced cheese and its mechanisms.

In this study, we investigated the combined effect of 222 nm krypton-chlorine excilamp (EX) and 307 nm ultraviolet-B (UVB) light on the inactivation of Salmonella Typhimurium and Listeria monocytogenes on sliced cheese. The data confirmed that simultaneous exposure to EX and UVB irradiation for 80 s reduced S. Typhimurium and L. monocytogenes population by 3.50 and 3.20 log CFU/g, respectively, on sliced cheese. The synergistic cell count reductions in S. Typhimurium and L. monocytogenes in the combined treatment group were 0.88 and 0.59 log units, respectively. The inactivation mechanism underlying the EX and UVB combination treatment was evaluated using fluorescent staining. The combination of EX and UVB light induced the inactivation of reactive oxygen species (ROS) defense enzymes (superoxide dismutase) and synergistic ROS generation, resulting in synergistic lipid peroxidation and destruction of the cell membrane. There were no significant (P > 0.05) differences in the color, texture, or sensory attributes of sliced cheese between the combination treatment and control groups. These results demonstrate that combined treatment with EX and UVB light is a potential alternative strategy for inactivating foodborne pathogens in dairy products without affecting their quality.

The fate of Salmonella enterica and Listeria monocytogenes in the pulp of eight native Brazilian and exotic fruits.

Despite the wide variety of native and exotic fruits in Brazil, there is limited understanding of their ability to support pathogens during storage. This study aimed to evaluate the behavior of Salmonella enterica and Listeria monocytogenes inoculated into the pulp of eight fruits native and exotic to Brazil: Jenipapo (Genipa americana L.), Umbu (Spondias tuberosa Arruda), Maná (Solanum sessiliflorum), Cajá-manga (Spondias dulcis), Physalis (Physalis angulata L.), Feijoa (Acca sellowiana), Cupuaçu (Theobroma grandiflorum) (average pH < 3.3) and in a low acidy fruit: Abiu (Pouteria caimito) (pH 6.11). The pathogens were inoculated into the different fruits and stored at 10, 20, 30 and 37 °C for up to 12 h and 6 days, respectively. Among the fruits evaluated, Abiu was the only one that allowed Salmonella growth, showing higher δ-values at 20 and 30 °C (5.6 log CFU/g for both temperatures). For Physalis and Feijoa, there was a small reduction in the pathogen concentration (<1 log-cycle), mainly at 10 and 20 °C, indicating its ability to remain in the matrices. For the other fruits, notable negative δ-values were obtained, indicating a tendency towards microbial inactivation. The survival potential was significantly affected by temperature in Abiu, Maná, Cupuaçu, and Cajá-manga (p < 0.05). The same phenomena regarding δ-value were observed for L. monocytogenes population, with the greatest survival potential observed at 20 °C in Abiu (3.3 log CFU/g). Regarding the exponential growth rates in Abiu, the highest values were observed at 30 and 37 °C, both for Salmonella (4.6 and 4.9 log (CFU/g)/day, respectively) and for L. monocytogenes (2.8 and 2.7 log (CFU/g)/day, respectively), with no significant difference between both temperatures. Regarding microbial inactivation, L. monocytogenes showed greater resistance than Salmonella in practically all matrices. Jenipapo and Umbu were the pulps that, in general, had the greatest effect on reducing the population of pathogens. Furthermore, the increase in storage temperature seems to favor the increase on inactivation rates. In conclusion, Salmonella and L. monocytogenes can grow only in Abiu pulp, although they can survive in some acidic tropical fruits kept at refrigeration and abusive temperatures.

Effect of Different Isolation Methods on Bioaerosol Distribution: An In Vitro Study.

Purpose: The purposes of this in vitro study were to evaluate the effect of three isolation methods to mitigate bioaerosols during stainless steel crown (SSC) preparations and assess the distribution of Streptococcus mutans by aerosolization in closed-room operatories. Methods: Melamine teeth coated in laboratory-grown S. mutans biofilm were prepared for SSCs using three different isolation methods. Agar plates were placed in five locations throughout the operatory and opened during each preparation as well as for 10 minutes immediately following to collect aerosolized S. mutans. Bacterial colonies were counted after incubating plates for 48 hours. Data were analyzed for differences between the isolation method and plate locations. Results: Bacterial colony counts for teeth prepared using high-volume evacuation suction (HVE) with dental dam (DD) isolation were statistically significantly higher than for those prepared using HVE with a DryShield®(DS) and HVE with no isolation at the assistant (A) (P<0.001), operator face shield (FS) (P<0.001), and patient (Pt) (P=0.002) locations. No significant differences were found among isolation methods for parent (Pa) or rear delivery (RD) locations. The location that produced the most bacterial colony counts using HVE with DD isolation was FS (P<0.001), followed by A (P=0.04), Pt (P<0.001), and RD and Pa (P<0.001). Counts produced from teeth prepared with DS isolation were significantly higher at the Pt location than the A (P<0.001), FS (P=0.002), RD (P<0.001), and Pa (P=0.008) locations. Conclusion: The use of dental dam with high-volume evacuation suction during stainless steel crown preparations increased bioaerosols near the procedure, while dental evacuation systems (DryShield®) may effectively limit their spread.

Formulation and assessment of biological properties of garcinia indica fruit extract mouthrinse as an adjunct to oral hygiene regimen: an in vitro analysis.

The prevalence of gingivitis is substantial within the general population, necessitating rigorous oral hygiene maintenance. OBJECTIVE: This study assessed a Garcinia indica (GI) fruit extract-based mouthrinse, comparing it to a 0.1% turmeric mouthrinse and a 0.2% Chlorhexidine (CHX) mouthrinse. The evaluation encompassed substantivity, staining potential, antimicrobial efficacy and cytocompatibility. METHODOLOGY: The study employed 182 tooth sections. For antimicrobial analysis, 64 extracted human teeth coated with a polymicrobial biofilm were divided into four groups, each receiving an experimental mouthrinse or serving as a control group with distilled water. Microbial reduction was assessed through colony forming units (CFU). Substantivity was evaluated on 54 human tooth sections using a UV spectrophotometer, while staining potential was examined on 64 tooth sections. Cytocompatibility was tested using colorimetric assay to determine non-toxic levels of 0.2% GI fruit extract, 0.1% Turmeric, and 0.2% CHX. RESULTS: Data were analysed with one-way ANOVA (α=0.05). Cell viability was highly significant (p<0.001) in the 0.2% GI group (64.1±0.29) compared to 0.1% Turmeric (40.2±0.34) and 0.2% CHX (10.95±1.40). For antimicrobial activity, both 0.2% GI (20.18±4.81) and 0.2% CHX (28.22±5.41) exhibited no significant difference (P>0.05) at end of 12 hours. However, 0.1% Turmeric showed minimal CFU reduction (P<0.001). Substantivity results at 360 minutes indicated statistically significant higher mean release rate in 0.1%Turmeric (12.47±5.84 ) when compared to 0.2% GI (5.02±3.04) and 0.2% CHX (4.13±2.25) (p<0.001). The overall discoloration changes (∆E) were more prominent in the 0.2% CHX group (18.65±8.3) compared to 0.2% GI (7.61±2.4) and 0.1% Turmeric (7.32±4.9) (P<0.001). CONCLUSION: This study supports 0.2% GI and 0.1% Turmeric mouth rinses as potential natural alternatives to chemical mouth rinses. These findings highlight viability of these natural supplements in oral healthcare.

Use of dishwashers fails to inactivate foodborne pathogens in home-canned model foods.

Risky home canning techniques are still performed for food preservation due to limited science-based recommendations. This study aimed to evaluate the inactivation of Shiga toxin-producing Escherichia coli O157:H7, Salmonella enterica (ser. Typhimurium, Enteritidis, and Infantis) and Listeria monocytogenes during home canning with a household dishwasher. The 450 mL of blended tomato (acidic liquid food) and potato puree (non-acidic solid food) were prepared with 1.5 % salt and 25 mL vinegar as model foods in glass jars (660 mL). The two model foods were sterilized, then inoculated with separate cocktails of each pathogen at 106-107 CFU/g. The prepared jars were placed in the bottom rack of a dishwasher and subjected to the following cycles: economic (50 °C, 122 min), express (60 °C, 54 min), and intensive (70 °C, 96 min). Temperature changes in jars were monitored by using thermocouples during heat treatment. Within the center of the jars, temperatures were measured as 45 to 53 °C in blended tomato and 44 to 52 °C in potato puree during all tested dishwasher cycles, respectively. The economic cycle treatment reduced S. enterica, E. coli O157:H7, and L. monocytogenes populations by 3.1, 4.6, and 4.2 log CFU/g in blended tomato (P ≤ 0.05), where a <1.0 log reduction was observed in potato puree (P > 0.05). All pathogens showed similar heat resistance during the express cycle treatment with a log reduction ranging from 4.2 to 5.0 log CFU/g in blended tomato and 0.6 to 0.7 log CFU/g in potato puree. Reduction in L. monocytogenes population was limited (0.6 log CFU/g) compared to E. coli O157:H7 (2.0 log CFU/g) and S. enterica (2.7 log CFU/g) in blended tomato during the intensive cycle treatment (P ≤ 0.05). Dishwasher cycles at manufacturer defined settings failed to adequately inactivate foodborne pathogens in model foods. This study indicates that home-canned vegetables may cause foodborne illnesses when dishwashers in home kitchens are used for heat processing.

Evaluation of the effect of active essential oil components added to pickled-based marinade on beef stored under vacuum packaging: Insight into physicochemical and microbiological quality.

This research aimed to evaluate the effects of the addition of active essential oil components (linalool and/or eugenol) to a pickle-based marinade on controlling spoilage and extending the shelf life of fresh beef stored under vacuum packaging at 4 °C. Linalool and eugenol were used either separately at a concentration of 0.2 % (w/w) or together (1:1 ratio) to preserve marinated beef under vacuum packaging for 15 days. Samples were assessed for pH, color, texture, oxidative degradation, and microbiological parameters. All marinades exhibited significantly lower TBARS values than the control sample. The addition of linalool or eugenol to the marinate showed a significant antibacterial effect on total aerobic mesophilic bacteria (TAMB), lactic acid bacteria (LAB), Pseudomonas spp., and total coliform, and the reductions in microbial counts are as follows: TAMB: 1.563 log CFU/g and 1.46 log CFU/g; Pseudomonas spp.: 1.303 log CFU/g and 1.08 log CFU/g; LAB: 0.323 log CFU/g and 0.357 log CFU/g. Marinated beef with linalool and/or eugenol was found to be effective against the growth of yeast and mold. The use of eugenol presented the most effective inhibition activity against yeast and mold by reducing the number of yeast and molds to an uncountable level on the 12th and 15th days of storage. Physicochemical analysis also showed that the addition of active essential oils to marinade did not cause any undesirable effects on the color and texture properties of beef samples. Therefore, the findings revealed that eugenol and linalool could be suitable alternatives for beef marination.

Comparative performance of contact plate metod and swab method for surface microbial contamination on medical fabrics.

BACKGROUND: The contact plate method is widely accepted and used in various fields where hygiene and contamination levels are crucial. Evidence regarding the applicability of the contact plate method for sampling fabric microbial contamination levels in real medical environments was limited. This study aimed to assess the applicability of the contact plate method for detecting microbial contamination on medical fabrics in a real healthcare environment, thereby providing a benchmark for fabric microbial sampling methods. METHODS: In a level three obstetrics ward of a hospital, twenty-four privacy curtains adjacent to patient beds were selected for this study. The contact plate and swab method were used to collect microbial samples from the privacy curtains on the 1st, 7th, 14th, and 28th days after they were hung. The total colony count on each privacy curtain surface was calculated, and microbial identification was performed. RESULTS: After excluding the effects of time, room type, and curtain location on the detected microbial load, the linear mixed-effects model analysis showed that contact plate method yielded lower colony counts compared to swab method (P < 0.001). However, the contact plate method isolated more microbial species than swab method (P < 0.001). 291 pathogenic strains were isolated using the contact plate method and 133 pathogenic strains were isolated via the swab method. There was no difference between the two sampling methods in the detection of gram-negative bacteria (P = 0.089). Furthermore, the microbial load on curtains in double-occupancy rooms was lower than those in triple-occupancy rooms (P = 0.021), and the microbial load on curtains near windows was lower than that near doors (P = 0.004). CONCLUSION: Contact plate method is superior to swab method in strain isolation. Swab method is more suitable for evaluating the bacterial contamination of fabrics.

Critical hydrodynamic force levels for efficient removal of oral biofilms in simulated interdental spaces.

OBJECTIVES: Sonic toothbrushes generate hydrodynamic shear forces for oral biofilm removal on tooth surfaces, but the effective thresholds for biofilm removal remain unexplored. This in vitro study aimed to investigate various threshold values for hydrodynamic biofilm removal in vitro. MATERIALS AND METHODS: A specialized test bench was designed with a known water flow field within a gap, ensuring that hydrodynamic shear forces on the wall were solely dependent on the volume flow, which was quantifiable using an integrated flow meter and proven by a computational fluid dynamics simulation. A young 20 h supragingival six-species biofilm was developed on hydroxyapatite disks (∅ 5 mm) and applied into the test bench, subjecting them to ascending force levels ranging from 0 to 135 Pa. The remaining biofilms were quantified using colony forming units (CFU) and subjected to statistical analysis through one-way ANOVA. RESULTS: Volume flow measures < 0.1 l/s: Error 1% of reading were established with the test bench. Untreated biofilms (0 Pa, no hydrodynamic shear forces) reached 7.7E7 CFU/harvest and differed significantly from all treated biofilm groups. CFU reductions of up to 2.3E6 were detected using 20 Pa, and reductions of two orders of magnitude were reached above wall shear forces of 45 Pa (6.9E5). CONCLUSIONS: Critical hydrodynamic force levels of at least 20 Pa appear to be necessary to have a discernible impact on initial biofilm removal. CLINICAL RELEVANCE: Pure hydrodynamic forces alone are insufficient for adequate biofilm removal. The addition of antiseptics is essential to penetrate and disrupt hydrodynamically loosened biofilm structures effectively.

Antibiotic Resistance and Disinfectant Resistance Among Escherichia coli Isolated During Red Meat Production.

Escherichia coli commonly found in the gastrointestinal tracts of food animals include Shiga toxin-producing E. coli (STEC, stx+, eae-), Enterohemorrhagic E. coli (EHEC, stx+, eae+), Enteropathogenic E. coli (EPEC, stx-, eae+), and "nondiarrheagenic" E. coli (NDEC, stx-, eae-). EHEC, EPEC, and STEC are associated with foodborne disease outbreaks. During meat processing, disinfectants are employed to control various bacteria, including human pathogens. Concerns exist that E. coli resistant to antibiotics are less susceptible to disinfectants used during meat processing. Since EHEC, EPEC, and STEC with reduced susceptibility to disinfectants are potential public health risks, the goal of this study was to evaluate the association of antibiotic resistant (ABR) E. coli with increased tolerance to 4% lactic acid (LA) and 150 ppm quaternary ammonium compounds (QACs). A pool of 3,367 E. coli isolated from beef cattle, veal calves, swine, and sheep at various processing stages was screened to identify ABR E. coli. Resistance to ≥1 of the six antibiotics examined was identified in 27.9%, 36.1%, 54.5%, and 28.7% among the NDEC (n = 579), EHEC (n = 693), EPEC (n = 787), and STEC (n = 1308) isolates evaluated, respectively. Disinfectant tolerance did not differ (P > 0.05) between ABR and antibiotic susceptible EHEC isolates. Comparable frequencies (P > 0.05) of biofilm formation or congo red binding were observed between ABR and antibiotic susceptible strains of E. coli. Understanding the frequencies of ABR and disinfectant tolerance among E. coli present in food-animal is a critically important component of meat safety.

Effects of Fermentation Temperature, Drying Temperature, Caliber Size, Starter Culture, and Sodium Lactate on Listeria monocytogenes Inactivation During Salami Production.

The effect of fermentation and drying temperatures, caliber, and sodium lactate on Listeria monocytogenes inactivation was studied in salami, produced in a pilot scale, inoculated with 107 CFU/g of Listeria innocua ATCC® 33090 as a surrogate microorganism for L. monocytogenes. Fermentation temperature varied between 24 and 30°C, drying temperature between 14 and 20°C, caliber between 5.1 and 13.2 cm, and sodium lactate initial concentrations in salamis were 0 and 2%. L. innocua counts, pH and water activity were determined in salamis over time. Sodium lactate (2%) decreased pH drop and Listeria inactivation during fermentation. Baranyi & Roberts equation was used to fit the experimental data and to estimate, for each test condition, inactivation rate (k), initial (Y0), and final counts of L. innocua (YEND). Total inactivation was calculated as Y0 minus YEND (Y0-YEND). Then, using a Box Benkhen experimental design, a quadratic model for k and a two-factor interaction model (2FI) for Y0 - YEND were obtained as functions of fermentation temperature, drying temperature, and caliber size. The models predicted that maximum k and Y0 -YEND, -2.62 ± 0.14 log10 CFU/g/day and 4.5 ± 0.1 log10 CFU/g, respectively, would be obtained fermenting at 30°C and drying at 20°C regardless of caliber. Drying at 14°C allowed Listeria growth until a water activity (aw) of 0.92 was reached. Therefore, if initial Listeria contamination is high (3 log10 CFU/g), drying at low temperatures will compromise product safety.

Method of Inoculation Influences the Survival of Salmonella enterica on Retail and Orchard Peaches.

Challenge studies associated with fruits and vegetables generally utilize wet bacterial inoculation methods. However, a recent salmonellosis outbreak in the U.S. was linked to peaches plausibly contaminated via fugitive dust from a nearby animal operation. This outbreak has highlighted the need for a suitable inert carrier which can be used for the dry transfer of Salmonella enterica to produce. The purpose of this study was 1) to examine the population stability of S. enterica and its surrogate, Enterococcus faecium, in different dry matrices during extended storage to identify suitable carriers and 2) to evaluate the survival of S. enterica on peaches based on the mode of contamination (i.e., wet vs. dry). S. enterica and E. faecium were cultivated on tryptic soy agar (TSA) and inoculated into corn-cob small animal litter, sand, or silica at 10-11 log CFU/g. Matrices were mixed by hand and stored at 25°C and 33% relative humidity for up to 120 d. S. enterica remained relatively stable in the silica and litter, with no significant decrease in population after 14 and 28 d, respectively. E. faecium significantly reduced in all matrices, with the greatest reduction observed in silica (2.86 log CFU/g after 120 d). Additional carriers would need to be assessed for E. faecium which could maintain its population stability. Silica was ultimately selected for the dry carrier of S. enterica. Peaches available at retail or from orchards were inoculated with S. enterica using the silica carrier or by spot or dip inoculation methods at 5 log CFU/peach and stored at 5°C and 80% relative humidity for up to 28 d. The population of S. enterica significantly reduced on all peaches except for the dry inoculated orchard peaches, where the population remained stable (4.62 ± 0.35 log CFU/peach after 28 d). Results from this study determined that the mode of contamination influences the survival of S. enterica on peaches and that dry inoculation methods should be considered for produce in some instances.

Listeria monocytogenes Contamination Leads to Survival and Growth During Enoki Mushroom Cultivation.

Two recent outbreaks of listeriosis have been linked to the consumption of enoki mushrooms. After the first outbreak, import sampling by the U.S. FDA identified that 43% of the samples evaluated were positive for Listeria monocytogenes (Lm). These observations raised questions about the potential sources of Lm contamination of enoki mushrooms. One potential source of contamination is during enoki mushroom cultivation, as growing conditions are comparatively cool and moist to induce mushroom germination, to which Lm is well adapted. Two varieties of enoki mushrooms were evaluated to determine the potential for Lm to contaminate enoki cultures when introduced at various points during cultivation (inoculation, scraping, pinning, and collaring). The results of two trials showed that Lm established contamination and grew to similar levels in the substrate regardless of when Lm was introduced and, with one exception, did not alter the rate of mushroom generation to below the control. Enumeration of Lm in enoki mushroom cultures at harvest found an average contamination of 103 cfu/g, though the results were variable. Refrigerated storage for six weeks was found to result in an increase in Lm. Additionally, no statistically significant difference in the levels of Lm was observed based on proximity to the substrate, though levels of Lm in the different enoki samples correlated with levels of Lm in the substrate at harvest, but not at scraping. The ability of Lm to grow independently in the media used to culture enoki was assessed, and Lm was found to be unable to grow but could sporadically survive in Masters Mix. No growth of Lm was observed in potato dextrose broth, though growth could occur on the agar. Overall, the data indicate a high potential for the establishment of Lm contamination at any point during enoki cultivation to result in Lm-contaminated mushrooms. These data indicate a need for active control mechanisms to prevent the introduction of Lm to enoki cultures.

Antimicrobial activity of cleanser tablets against S. mutans and C. Albicans on different denture base materials.

BACKGROUND: In this study, the antimicrobial activity of three different cleanser tablets on S. mutans and C. albicans adhesion to PMMA, polyamide and 3D printed resin was investigated. METHODS: 40 samples were prepared for PMMA (SR Triplex Hot), polyamide (Deflex) and 3D printed resin (PowerResins Denture) materials and divided into four subgroups for cleansers (Aktident™, Protefix™, Corega™ tablets and distilled water) (n = 5). After the surface preparations were completed, the samples were immersed separately in tubes containing the prepared microorganism suspension and incubated at 37˚C for 24 h. After the incubation, the samples were kept in the cleanser solutions. The samples were then transferred to sterile saline tubes. All the tubes were vortexed and 10 µl was taken from each of them. Sheep blood agar was inoculated for colony counting. The inoculated plates were incubated for 48 h for S. mutans and 24 h for C. albicans. After incubation, colonies observed on all plates were counted. Statistical analyses were done with three-way ANOVA and Tukey's multiple comparison test. RESULTS: Polyamide material registered the highest colony count of S. mutans, whereas PMMA registered the lowest. Significant differences in S. mutans adherence (p = 0.002) were found between the three denture base materials, but no such difference in C. albicans adherence (p = 0.221) was identified between the specimens. All three cleanser tablets eliminated 98% of S. mutans from all the material groups. In all these groups, as well, the antifungal effect of Corega™ on C. albicans was significantly higher than those of the other two cleanser tablets. CONCLUSIONS: According to the study's results, it may be better to pay attention to surface smoothness when using polyamide material to prevent microorganism retention. Cleanser tablets are clinically recommended to help maintain hygiene in removable denture users, especially Corega tablets that are more effective on C. albicans.

Reduction of microorganisms in carious dentin by photodynamic therapy mediated by potassium iodide added to methylene blue and red laser.

OBJECTIVE: To evaluate the effect of the association of potassium iodide to antimicrobial photodynamic therapy on human carious dentin produced with a microcosm biofilm model. METHODS: A microcosm biofilm model was used to generate a caries lesion on human dentin. Pooled human saliva diluted with glycerol was used as an inoculum on specimens immersed on McBain artificial saliva enriched with 1 % sucrose (24 h at 37 °C in 5 % CO2). After refreshing culture media for 7 days, the dentin specimens were divided in 5 groups (3 specimens per group, in triplicate; n = 9): C (NaCl 0.9 %), CX (2 % chlorhexidine), PKI (0.01 % methylene blue photosensitizer+50 mM KI), L (laser at 15 J, 180 s, 22.7 J/cm2), and PKIL (methylene blue + KI + Laser). After the treatments, dentin was collected, and a 10-fold serial dilution was performed. The number of total microorganisms, total lactobacilli, total streptococci, and Streptococcus mutans was analyzed by microbial counts (CFU/mL). After normality and homoscedasticity analysis, the Welch's ANOVA and Dunnett's tests were used for CFU. All tests used a 5 % significance level. RESULTS: CX and PKIL groups showed significant bacterial decontamination of dentin, compared to group C (p < 0.05) reaching reductions up to 3.8 log10 for CX for all microorganisms' groups and PKIL showed 0.93, 1.30, 1.45, and 1.22 log10 for total microorganisms, total lactobacilli, total streptococci, and S. mutans, respectively. CONCLUSION: aPDT mediated by the association of KI and methylene blue with red laser reduced the viability of microorganisms from carious dentin and could be a promising option for cavity decontamination.

Coating with phenolic branched-chain fatty acid reduces Listeria innocua populations on apple fruit.

An antimicrobial coating was produced by mixing phenolic branched-chain fatty acid (PBC-FA) with glycerol and a carboxymethyl cellulose solution (CMC) at pH 7. The resulting PBC-FA-CMC solution formed an emulsion with an average droplet size of 77 nm. The emulsion in the coating solution was stable for at least 30 days at 20 °C. The in vitro antimicrobial activity of the film formed from the PBC-FA emulsion was tested against a mixture of 3 strains of Listeria innocua (7 log CFU/mL). Film with a concentration of 1000 µg/mL of PBC-FA effectively reduced the population of L. innocua below the limit of detection (<1.48 log CFU/mL) in vitro. The effect of the 1000 µg/mL PBC-FA-CMC coating formulation was then evaluated against L. innocua inoculated on "Gala" apples. Results showed that compared with the non-coated control, the coating reduced L. innocua populations by ~2 log CFU/fruit and ~6 log CFU/fruit on the apple when enumerated on tryptic soy agar and selective media (PALCAM), respectively, indicating that PBC-FA applied as a coating on apples resulted in the sub-lethal injury of bacterial cells. When L. innocua was inoculated onto PBC-FA-coated apples, the L. innocua population decreased by ~4 log CFU/fruit during 14 days of shelf-life at 20 °C. The PBC-FA coating lowered the moisture loss but did not affect the color, firmness, or soluble solids content of apples during the 14-day at 20 °C. Overall, this study revealed that there is a potential that PBC-FA can be used as an antimicrobial coating to inactivate Listeria and preserve the quality of apples.

A non-destructive predictive model for estimating the freshness/spoilage of packaged chicken meat using changes in drip metabolites.

This study investigates the possibility of utilizing drip as a non-destructive method for assessing the freshness and spoilage of chicken meat. The quality parameters [pH, volatile base nitrogen (VBN), and total aerobic bacterial counts (TAB)] of chicken meat were evaluated over a 13-day storage period in vacuum packaging at 4 °C. Simultaneously, the metabolites in the chicken meat and its drip were measured by nuclear magnetic resonance. Correlation (Pearson's and Spearman's rank) and pathway analyses were conducted to select the metabolites for model training. Binary logistic regression (model 1 and model 2) and multiple linear regression models (model 3-1 and model 3-2) were trained using selected metabolites, and their performance was evaluated using receiver operating characteristic (ROC) curves. As a result, the chicken meat was spoiled after 7 days of storage, exceeding 20 mg/100 g VBN and 5.7 log CFU/g TAB. The correlation analysis identified one organic acid, eight free amino acids, and five nucleic acids as highly correlated with chicken meat and its drip during storage. Pathway analysis revealed tyrosine and purine metabolism as metabolic pathways highly correlated with spoilage. Based on these findings, specific metabolites were selected for model training: ATP, glutamine, hypoxanthine, IMP, tyrosine, and tyramine. To predict the freshness and spoilage of chicken meat, model 1, trained using tyramine, ATP, tyrosine, and IMP from chicken meat, achieved a 99.9 % accuracy and had an ROC value of 0.884 when validated using drip metabolites. This model 1 was improved by training with tyramine and IMP from both chicken meat and its drip (model 2), which increased the ROC value for drip metabolites from 0.884 to 0.997. Finally, selected two metabolites (tyramine and IMP) can predict TAB and VBN quantitatively through models 3-1 and 3-2, respectively. Therefore, the model developed using metabolic changes in drip demonstrated the capability to non-destructively predict the freshness and spoilage of chicken meat at 4 °C. To make generic predictions, it is necessary to expand the model's applicability to various conditions, such as different temperatures, and validate its performance across multiple chicken batches.

Synergistic efficacy of ultrasound and ammonium persulfate in inactivating Escherichia coli O157:H7 in buffered peptone water and orange juice.

This study investigated the synergistic effects of ammonium persulfate (PS) and ultrasound (US) on the inactivation of Escherichia coli O157:H7 in buffered peptone water (BPW) and orange juice products. A comprehensive assessment of PS concentrations ranging from 1 to 300 mM, considering not only the statistical significance but also the reliability and stability of the experimental outcomes, showed that 150 mM was the optimal PS concentration for the inactivation of E. coli O157:H7. Additionally, US output intensities varying from 30 % to 60 % of the maximum US intensity were evaluated, and 50 % US amplitude was found to be the optimal US condition. A 50 % amplitude setting on the sonicator corresponds to half of its maximum displacement, approximately 60 µm, based on a maximum amplitude of 120 µm. The inactivation level of E. coli O157:H7 was significantly enhanced by the combined treatment of PS and US, compared to each treatment of PS and US alone. In the BPW, a 10-min treatment with the combination of PS and US resulted in a significant synergistic inactivation, achieving up to a log reduction of 3.86 log CFU/mL. Similarly, in orange juice products, a 5-min treatment with the combination of PS and US yielded a significant synergistic inactivation, with a reduction reaching 5.90 log CFU/mL. Although the treatment caused a significant color change in the sample, the visual differences between the treated and non-treated groups were not pronounced. Furthermore, the combined treatment in orange juice demonstrated significantly enhanced antimicrobial efficacy relative to BPW. Despite identical 5-min treatment periods, the application in orange juice resulted in a substantially higher log reduction of E. coli O157:H7, achieving 7.16 log CFU/mL at a reduced PS concentration of 30 mM, whereas the same treatment in BPW yielded only a 2.89 log CFU/mL reduction at a PS concentration of 150 mM, thereby highlighting its significantly superior antimicrobial performance in orange juice. The mechanism underlying microbial inactivation, induced by the combined treatment of PS and US, was identified as significant cell membrane damage. This damage is mediated by sulfate radicals, generated through the sono-activation of persulfate. In addition, the low pH of orange juice, measured at 3.7, is likely to have further deteriorated the E. coli O157:H7 cells compared to BPW (pH 7.2), by disrupting their cell membranes, proton gradients, and energy metabolism. These findings underscore the effectiveness of PS and US integration as a promising approach for non-thermal pasteurization in the food industry. Further research is needed to optimize treatment parameters and fully explore the practical application of this technique in large-scale food processing operations. Sensory evaluation and nutritional assessment are also necessary to address the limitations of PS.