The Frequency of Occipital Spurs in Relation to the Cephalic Index: An Anatomorphometric Cone Beam CT Study.

BACKGROUND: The occipital spur (OS) can be described as an abnormal elongation of the external occipital protuberance (EOP). The cephalic index (CI) refers to the ratio of width to length in any skull. AIM: The aim of the present study was to evaluate the frequency and types of OS. It also aimed to determine the mean CI and the distribution of skull types using cone beam computed tomography (CBCT). And to determine if there was a relationship between the cephalic index and the presence and types of OS. METHODS: CBCT scans from 523 patients were included in the study. OSs were classified as type 1 (flat), type 2 (crest), and type 3 (spine). Skull length and width were measured on axial sections and the CI was calculated. Based on the cephalic index (CI), skull types were classified as dolichocephalic (CI < 75), mesocephalic (75 < CI < 80), brachycephalic (80 < CI < 85), and hyperbrachycephalic (CI > 85). RESULTS: The most common cranial types in the study group were brachycephalic (44.7%), mesocephalic (28.3%), hyperbrachycephalic (21.2%), and dolichocephalic (5.7%). Regarding the presence of OS, 54.3% of the participants had no OS, 23.1% had flat type, 15.3% had crest type, and 7.2% had spin type OS. There was a statistically significant difference (P < 0.05) in the frequency of OS according to skull type. CONCLUSION: This study, the first to evaluate CI and OS using CBCT, concludes that brachycephaly is the most common cranial type. OS is more common in mesocephalic and dolichocephalic skulls, at older ages, and in males.

Age Estimation by Machine Learning and CT-Multiplanar Reformation of Cranial Sutures in Northern Chinese Han Adults.

OBJECTIVES: To establish age estimation models of northern Chinese Han adults using cranial suture images obtained by CT and multiplanar reformation (MPR), and to explore the applicability of cranial suture closure rule in age estimation of northern Chinese Han population. METHODS: The head CT samples of 132 northern Chinese Han adults aged 29-80 years were retrospectively collected. Volume reconstruction (VR) and MPR were performed on the skull, and 160 cranial suture tomography images were generated for each sample. Then the MPR images of cranial sutures were scored according to the closure grading criteria, and the mean closure grades of sagittal suture, coronal sutures (both left and right) and lambdoid sutures (both left and right) were calculated respectively. Finally taking the above grades as independent variables, the linear regression model and four machine learning models for age estimation (gradient boosting regression, support vector regression, decision tree regression and Bayesian ridge regression) were established for northern Chinese Han adults age estimation. The accuracy of each model was evaluated. RESULTS: Each cranial suture closure grade was positively correlated with age and the correlation of sagittal suture was the highest. All four machine learning models had higher age estimation accuracy than linear regression model. The support vector regression model had the highest accuracy among the machine learning models with a mean absolute error of 9.542 years. CONCLUSIONS: The combination of skull CT-MPR and machine learning model can be used for age estimation in northern Chinese Han adults, but it is still necessary to combine with other adult age estimation indicators in forensic practice.

A new hydroxyapatite-alginate-gelatin biocomposite favor bone regeneration in a critical-sized calvarial defect model.

This study aimed to evaluate the osteogenic potential of hydroxyapatite (HA), Alginate (Alg), and Gelatine (Gel) composite in a critical-size defect model in rats. Twenty-four male rats were divided into three groups: a negative control with no treatment (Control group), a positive control treated with deproteinized bovine bone mineral (DBBM group), and the experimental group treated with the new HA-Alg-Gel composite (HA-Alg-Gel group). A critical size defect (8.5mm) was made in the rat's calvaria, and the bone formation was evaluated by in vivo microcomputed tomography analysis (µCT) after 1, 15, 45, and 90 days. After 90 days, the animals were euthanized and histological and histomorphometric analyses were performed. A higher proportion of mineralized tissue/biomaterial was observed in the DBBM group when compared to the HA-Alg-Gel and Control groups in the µCT analysis during all analysis periods. However, no differences were observed in the mineralized tissue/biomaterial proportion observed on day 1 (immediate postoperative) in comparison to later periods of analysis in all groups. In the histomorphometric analysis, the HA-Alg-Gel and Control groups showed higher bone formation than the DBBM group. Moreover, in histological analysis, five samples of the HA-Alg-Gal group exhibited formed bone spicules adjacent to the graft granules against only two of eight samples in the DBBM group. Both graft materials ensured the maintenance of defect bone thickness, while a tissue thickness reduction was observed in the control group. In conclusion, this study demonstrated the osteoconductive potential of HA-Alg-Gel bone graft by supporting new bone formation around its particles.

Advanced Imaging of Shunt Valves in Cranial CT Scans with Photon-Counting Scanner.

This brief report aimed to show the utility of photon-counting technology alongside standard cranial imaging protocols for visualizing shunt valves in a patient's cranial computed tomography scan. Photon-counting CT scans with cranial protocols were retrospectively surveyed and four types of shunt valves were encountered: proGAV 2.0®, M.blue®, Codman Certas®, and proSA®. These scans were compared with those obtained from non-photon-counting scanners at different time points for the same patients. The analysis of these findings demonstrated the usefulness of photon-counting technology for the clear and precise visualization of shunt valves without any additional radiation or special reconstruction patterns. The enhanced utility of photon-counting is highlighted by providing superior spatial resolution compared to other CT detectors. This technology facilitates a more accurate characterization of shunt valves and may support the detection of subtle abnormalities and a precise assessment of shunt valves.

3-D Printed Skull Model: Role in Identification of Site of Bone Defect in Cases with CSF Rhinorrhea.

Role of 3-D models in the identification of the site and extent of bone defects in the skull base for the treatment of CSF rhinorrhea is analyzed. Such models were used successfully in the management of two patients who failed previous attempts at basal reconstruction. The principal advantage of the models was in exact delineation of the size and site of bone defect and deciphering of its relationship with adjoining critical regions of the brain.

Functional ultrasound imaging of human brain activity through an acoustically transparent cranial window.

Visualization of human brain activity is crucial for understanding normal and aberrant brain function. Currently available neural activity recording methods are highly invasive, have low sensitivity, and cannot be conducted outside of an operating room. Functional ultrasound imaging (fUSI) is an emerging technique that offers sensitive, large-scale, high-resolution neural imaging; however, fUSI cannot be performed through the adult human skull. Here, we used a polymeric skull replacement material to create an acoustic window compatible with fUSI to monitor adult human brain activity in a single individual. Using an in vitro cerebrovascular phantom to mimic brain vasculature and an in vivo rodent cranial defect model, first, we evaluated the fUSI signal intensity and signal-to-noise ratio through polymethyl methacrylate (PMMA) cranial implants of different thicknesses or a titanium mesh implant. We found that rat brain neural activity could be recorded with high sensitivity through a PMMA implant using a dedicated fUSI pulse sequence. We then designed a custom ultrasound-transparent cranial window implant for an adult patient undergoing reconstructive skull surgery after traumatic brain injury. We showed that fUSI could record brain activity in an awake human outside of the operating room. In a video game "connect the dots" task, we demonstrated mapping and decoding of task-modulated cortical activity in this individual. In a guitar-strumming task, we mapped additional task-specific cortical responses. Our proof-of-principle study shows that fUSI can be used as a high-resolution (200 µm) functional imaging modality for measuring adult human brain activity through an acoustically transparent cranial window.

Evaluation and 3D imaging of mineral structure changes of the rabbit (New Zealand) skull during developmental periods.

This study aimed to determine the morphometric measurements anatomically and CT images of skulls of healthy male and female rabbits during postnatal development, to analyse the data statistically and to demonstrate the structural changes in bone. A total of 40 rabbits (20 females and 20 males) were divided into four groups including prepubertal period (group I (0-1 month)), period between adolescence and adulthood (group II (3-5 month)) and later (young adult period as group III (1-3 years) and old adult period as group IV (3-5 years)), with five animals in each group. After the morphometric measurements, the surface area and volume values of the skull were calculated. The skulls were reconstructed using a 3D Slicer (5.0.2), which is used for 3D modelling. The cranial bones in each group were then crushed using a grinder so that the powdered samples were obtained for XRF (X-ray fluorescence technique). The p-value was statistically highly significant between group and gender (p < 0.001). In morphometric measurements, males were generally higher than females. Only PL, GBOC and GNB measurements were higher in females. The p-value between groups (in all measurements), between genders (in TL, GLN, FL, VL, OZB and GBN parameters) and between groups and genders (in TL, DL and VL parameters) was statistically highly significant (p < 0.001). The p-value between the groups, p-value between sexes and p-value between group and sex in Si, P, K, Ca, Ni, Zn, Sr, Sr and Ca/P elements were statistically significant (p < 0.001). Consequently, metric, volume and surface area measurements were taken through 3D modelling of skull bone in prepubertal period (group I), period between adolescence and adulthood (group II) and later (young adult period as group III and old adult period as group IV) of rabbits and the change in the mineral structure during postnatal development and effect of sex on this change were investigated. This might be the first study to assess both metric and mineral changes at four age intervals taken during the life span of rabbits.

Investigation of Skull Cortical Thickness Changes in Healthy Population and Patients With Schizophrenia on Computed Tomography Images.

Cortical bone thickness is essential for the mechanical function of bone. Some factors including aging, sex, body size, hormone levels, behavior, and genetics lead to changes in cranial cortical robusticity. Moreover, the skull is one of the hardest and most durable structures in the human body. Schizophrenia is defined as a psychiatric disease characterized by delusions and hallucinations, and these patients have reduced brain volume; however, there is no study including cortical bone structure. For this reason, the aim of this study was to determine whether there is a difference in the skull cortical thickness of patients with schizophrenia and, compare it with healthy subjects. The cranial length, cranial width, anterior cortical thickness, right and left anterior cortical thickness, right and left lateral cortical thickness, right and left posterior lateral thickness, and posterior cortical thickness were measured with axial computed tomography images of 30 patients with schizophrenia and 132 healthy individuals aged between 18 and 69years. A statistically significant difference was found between the two groups in the measurements of right and left posterior lateral thickness, and posterior cortical thickness ( P = 0.006, P = 0.001, and P = 0.047, respectively). The sexes were compared, and it was found that the cranial width, anterior thickness, left anterior thickness, and right and left posterior thickness measurements of patients with schizophrenia showed a statistically significant difference compared with the control group ( P < 0.001, P = 0.003, P = 0.001, P < 0.001 and P < 0.001, respectively). The authors observed that skull cortical thickness may be different in schizophrenia. The results obtained from this study may be beneficial for evaluating these structures for clinical and pathological processes. Furthermore, knowledge about the skull cortical thickness in planning surgical procedures will increase the reliability and effectiveness of the surgical method, and this will minimize the risk of complications.

Clinical and Anthropological Analyses of a Case From 19th Century South Africa With a Confluence of Uncommon Cranial Pathological Conditions.

This study combines clinical and anthropological analyses to investigate the complex cranial pathology of a South African individual from the 19th century. The cranium was examined macroscopically and radiographically. Conducting a standard differential diagnosis was challenging given the complexity and uncommon nature of the pathology and required drawing on relatively sparse paleopathological and clinical case reports. Multiple conditions were identified including biparietal thinning, basilar invagination, platybasia, and complicated chronic frontal sinusitis, where the intracranial extension of sinus infection may likely have contributed to the individual's death. The authors urge for awareness of these uncommon conditions, as their presence can easily be overlooked or confound skeletal assessments. This clinical study contributes to the authors' understanding of uncommon and poorly described paleopathological diseases and will help to better facilitate their diagnosis in future research. It represents one of the first studies describing such an unusual cooccurrence of uncommon pathologies in an archeological individual.

A novel transcranial MR Guided focused ultrasound method based on the ultrashort echo time skull acoustic model and phase retrieval techniques.

Transcranial ultrasound stimulation (TUS) has been clinically applied as a neuromodulation tool. Particularly, the phase array ultrasound can be applied in TUS to non-invasively focus on the cortex or deep brain. However, the vital phase distortion of the ultrasound induced by the skull limits its clinical application. In the current study, we aimed to develop a hybrid method that combines the ultrashort echo time (UTE) magnetic resonance imaging (MRI) sequences with the prDeep technique to achieve focusing ventral intermediate thalamic nucleus (VIM). The time-reversal (TR) approach of the UTE numerical acoustic model of the skull combined with the prDeep algorithm was used to reduce the number of iterations. The skull acoustic model simulation therapy process was establish to valid this method's prediction and focus performance, and the classical TR method were considered as the gold standard (GS). Our approach could restore 75% of the GS intensity in 25 iteration steps, with a superior the noise immunity. Our findings demonstrate that the phase aberration caused by the skull can be estimated using phase retrieval techniques to achieve a fast and accurate transcranial focus. The method has excellent adaptability and anti-noise capacity for satisfying complex and changeable scenarios.

Perinatal imaging findings of a fetus with Pfeiffer syndrome and a heterozygous c.1019A>G, p.Tyr340Cys (Y340C) mutation in FGFR2 presenting a cloverleaf skull, craniosynostosis and short limbs on prenatal ultrasound mimicking thanatophoric dysplasia type II.

OBJECTIVE: We present perinatal imaging findings of a fetus with Pfeiffer syndrome and a heterozygous c.1019A>G, p.Tyr340Cys (Y340C) mutation in FGFR2 presenting a cloverleaf skull, craniosynostosis and short limbs on prenatal ultrasound mimicking thanatophoric dysplasia type II (TD2). CASE REPORT: A 37-year-old, gravida 2, para 1, woman underwent amniocentesis at 17 weeks of gestation because of advanced maternal age. Amniocentesis revealed a karyotype of 46,XY. However, craniofacial anomaly was found on prenatal ultrasound at 21 weeks of gestation, which showed a cloverleaf skull with severe craniosynostosis and relatively short straight long bones. Fetal magnetic resonance imaging (MRI) analysis at 22 weeks of gestation showed a cloverleaf skull, proptosis and relatively shallowing of the sylvian fissures. Prenatal ultrasound at 24 weeks of gestation showed a fetus with a cloverleaf skull with a biparietal diameter (BPD) of 6.16 cm (equivalent to 24 weeks), an abdominal circumference (AC) of 18.89 cm (equivalent to 24 weeks) and a femur length (FL) of 3.65 cm (equivalent to 21 weeks). A tentative diagnosis of TD2 was made. The pregnancy was subsequently terminated, and a 928-g malformed fetus was delivered with severe craniosynostosis, proptosis, midface retrusion, a cloverleaf skull, broad thumbs and broad big toes. The broad thumbs were medially deviated. Whole body X-ray showed a cloverleaf skull and straight long bones. However, molecular analysis of FGFR3 on the fetus revealed no mutation in the target regions. Subsequent whole exome sequencing (WES) on the DNA extracted from umbilical cord revealed a heterozygous c.1019A>G, p.Tyr340Cys (Y340C) mutation in the FGFR2 gene. CONCLUSION: Fetuses with a Y340C mutation in FGFR2 may present a cloverleaf skull on prenatal ultrasound, and WES is useful for a rapid differential diagnosis of Pfeiffer syndrome from TD2 under such a circumstance.

Does cranial bone ossification differ in children with developmental dysplasia of the hip?

OBJECTIVES: This study aims to compare cranial bone ossification between patients with developmental dysplasia of the hip (DDH) and healthy individuals. PATIENTS AND METHODS: Between September 2021 and April 2022, a total of 60 healthy female individuals (median age: 24.5 months; range, 18 to 36 months) and 56 female DDH patients (median age: 23 months; range, 18 to 35 months) were included. Age, head circumference, weight, height, and patency of the anterior fontanel were measured in groups. Percentiles were classified as very low, low, normal, high and very high. All patients were female and those with abnormal thyroid function test, vitamin D, calcium, phosphate and alkaline phosphatase values were not included in the study. For those diagnosed with DDH, they were included in the group regardless of the type of treatment. RESULTS: No statistically significant difference was found between the groups in terms of age and weight (p>0.05). The very low and very high head circumferences were more frequent, and the normal head circumferences were less frequent in the DDH group (p<0.05). There was no significant difference between groups in terms of fontanel closure (p>0.05). In open fontanels, no significant difference was found in both groups in terms of age (p>0.05). CONCLUSION: Our study results showed no significant difference between the fontanel ossifications of children with and without DDH; however, we found that the ossification of the skull bones of children with DDH was different compared to healthy children.

Comparison of the Effect of Platelet-rich Plasma (PRP) and Fat Graft on Autologous Bone Grafting in a Randomized-controlled Experimental Skull Model.

Gold standard method for the treatment of critical-sized bone defects is the autogenous bone grafting procedure. A number of new and potentially useful adjuncts currently are being investigated to enhance the success of bone grafting. We propose to evaluate the effect of the most known and easily obtained 2 biological materials, fat graft and platelet-rich plasma (PRP), on bone graft healing. Twenty-seven New Zealand male rabbits were included in this randomized, controlled study. Two-sided 15-mm diameter bone defects were created in the parietal bones and the bones taken were replaced right-to-left and vice versa with 1 control group, 1 fat graft applied group, and the last one PRP applied group. Histologic evaluation and 3-dimensional maxillofacial computerized tomography were performed and bone density was calculated. In radiologic analysis, bone density was significantly different in the PRP group compared with the control and fat graft group in the 12th week ( P <0.05). In histologic scoring analysis, the PRP group had a better score than the control and fat graft group, while the fat graft group was worse than the control group in the 6th week ( P <0.05). The addition of PRP had a positive effect whereas fat graft had a negative effect on bone graft healing compared with the control group.

A novel approach to craniofacial analysis using automated 3D landmarking of the skull.

Automatic dense 3D surface registration is a powerful technique for comprehensive 3D shape analysis that has found a successful application in human craniofacial morphology research, particularly within the mandibular and cranial vault regions. However, a notable gap exists when exploring the frontal aspect of the human skull, largely due to the intricate and unique nature of its cranial anatomy. To better examine this region, this study introduces a simplified single-surface craniofacial bone mask comprising of 6707 quasi-landmarks, which can aid in the classification and quantification of variation over human facial bone surfaces. Automatic craniofacial bone phenotyping was conducted on a dataset of 31 skull scans obtained through cone-beam computed tomography (CBCT) imaging. The MeshMonk framework facilitated the non-rigid alignment of the constructed craniofacial bone mask with each individual target mesh. To gauge the accuracy and reliability of this automated process, 20 anatomical facial landmarks were manually placed three times by three independent observers on the same set of images. Intra- and inter-observer error assessments were performed using root mean square (RMS) distances, revealing consistently low scores. Subsequently, the corresponding automatic landmarks were computed and juxtaposed with the manually placed landmarks. The average Euclidean distance between these two landmark sets was 1.5 mm, while centroid sizes exhibited noteworthy similarity. Intraclass coefficients (ICC) demonstrated a high level of concordance (> 0.988), with automatic landmarking showing significantly lower errors and variation. These results underscore the utility of this newly developed single-surface craniofacial bone mask, in conjunction with the MeshMonk framework, as a highly accurate and reliable method for automated phenotyping of the facial region of human skulls from CBCT and CT imagery. This craniofacial template bone mask expansion of the MeshMonk toolbox not only enhances our capacity to study craniofacial bone variation but also holds significant potential for shedding light on the genetic, developmental, and evolutionary underpinnings of the overall human craniofacial structure.

Craniofacial identification standards: A review of reliability, reproducibility, and implementation.

There are numerous anatomical and anthropometrical standards that can be utilised for craniofacial analysis and identification. These standards originate from a wide variety of sources, such as orthodontic, maxillofacial, surgical, anatomical, anthropological and forensic literature, and numerous media have been employed to collect data from living and deceased subjects. With the development of clinical imaging and the enhanced technology associated with this field, multiple methods of data collection have become accessible, including Computed Tomography, Cone-Beam Computed Tomography, Magnetic Resonance Imaging, Radiographs, Three-dimensional Scanning, Photogrammetry and Ultrasound, alongside the more traditional in vivo methods, such as palpation and direct measurement, and cadaveric human dissection. Practitioners often struggle to identify the most appropriate standards and research results are frequently inconsistent adding to the confusion. This paper aims to clarify how practitioners can choose optimal standards, which standards are the most reliable and when to apply these standards for craniofacial identification. This paper describes the advantages and disadvantages of each mode of data collection and collates published research to review standards across different populations for each facial feature. This paper does not aim to be a practical instruction paper; since this field encompasses a wide range of 2D and 3D approaches (e.g., clay sculpture, sketch, automated, computer-modelling), the implementation of these standards is left to the individual practitioner.

New diagnostic criteria for metopic ridges and trigonocephaly: a 3D geometric approach.

BACKGROUND: Trigonocephaly occurs due to the premature fusion of the metopic suture, leading to a triangular forehead and hypotelorism. This condition often requires surgical correction for morphological and functional indications. Metopic ridges also originate from premature metopic closure but are only associated with mid-frontal bulging; their surgical correction is rarely required. Differential diagnosis between these two conditions can be challenging, especially in minor trigonocephaly. METHODS: Two hundred seven scans of patients with trigonocephaly (90), metopic rigdes (27), and controls (90) were collected. Geometric morphometrics were used to quantify skull and orbital morphology as well as the interfrontal angle and the cephalic index. An innovative method was developed to automatically compute the frontal curvature along the metopic suture. Different machine-learning algorithms were tested to assess the predictive power of morphological data in terms of classification. RESULTS: We showed that control patients, trigonocephaly and metopic rigdes have distinctive skull and orbital shapes. The 3D frontal curvature enabled a clear discrimination between groups (sensitivity and specificity > 92%). Furthermore, we reached an accuracy of 100% in group discrimination when combining 6 univariate measures. CONCLUSION: Two diagnostic tools were proposed and demonstrated to be successful in assisting differential diagnosis for patients with trigonocephaly or metopic ridges. Further clinical assessments are required to validate the practical clinical relevance of these tools.

Back to the Roots: Reconstructing Large and Complex Cranial Defects using an Image-based Statistical Shape Model.

Designing implants for large and complex cranial defects is a challenging task, even for professional designers. Current efforts on automating the design process focused mainly on convolutional neural networks (CNN), which have produced state-of-the-art results on reconstructing synthetic defects. However, existing CNN-based methods have been difficult to translate to clinical practice in cranioplasty, as their performance on large and complex cranial defects remains unsatisfactory. In this paper, we present a statistical shape model (SSM) built directly on the segmentation masks of the skulls represented as binary voxel occupancy grids and evaluate it on several cranial implant design datasets. Results show that, while CNN-based approaches outperform the SSM on synthetic defects, they are inferior to SSM when it comes to large, complex and real-world defects. Experienced neurosurgeons evaluate the implants generated by the SSM to be feasible for clinical use after minor manual corrections. Datasets and the SSM model are publicly available at https://github.com/Jianningli/ssm .

Evaluation of new bone formation in critical-sized rat calvarial defect using 3D printed polycaprolactone/tragacanth gum-bioactive glass composite scaffolds.

Critical-sized bone defects are a major challenge in reconstructive bone surgery and usually fail to be treated due to limited remaining bone quality and extensive healing time. The combination of 3D-printed scaffolds and bioactive materials is a promising approach for bone tissue regeneration. In this study, 3D-printed alkaline-treated polycaprolactone scaffolds (M-PCL) were fabricated and integrated with tragacanth gum- 45S5 bioactive glass (TG-BG) to treat critical-sized calvarial bone defects in female adult Wistar rats. After a healing period of four and eight weeks, the new bone of blank, M-PCL, and M-PCL/TG-BG groups were harvested and assessed. Micro-computed tomography, histological, biochemical, and biomechanical analyses, gene expression, and bone matrix formation were used to assess bone regeneration. The micro-computed tomography results showed that the M-PCL/TG-BG scaffolds not only induced bone tissue formation within the bone defect but also increased BMD and BV/TV compared to blank and M-PCL groups. According to the histological analysis, there was no evidence of bony union in the calvarial defect regions of blank groups, while in M-PCL/TG-BG groups bony integration and repair were observed. The M-PCL/TG-BG scaffolds promoted the Runx2 and collagen type I expression as compared with blank and M-PCL groups. Besides, the bone regeneration in M-PCL/TG-BG groups correlated with TG-BG incorporation. Moreover, the use of M-PCL/TG-BG scaffolds promoted the biomechanical properties in the bone remodeling process. These data demonstrated that the M-PCL/TG-BG scaffolds serve as a highly promising platform for the development of bone grafts, supporting bone regeneration with bone matrix formation, and osteogenic features. Our results exhibited that the 3D-printed M-PCL/TG-BG scaffolds are a promising strategy for successful bone regeneration.

Dual-Channel in Spatial-Frequency Domain CycleGAN for perceptual enhancement of transcranial cortical vascular structure and function.

Observing cortical vascular structures and functions using laser speckle contrast imaging (LSCI) at high resolution plays a crucial role in understanding cerebral pathologies. Usually, open-skull window techniques have been applied to reduce scattering of skull and enhance image quality. However, craniotomy surgeries inevitably induce inflammation, which may obstruct observations in certain scenarios. In contrast, image enhancement algorithms provide popular tools for improving the signal-to-noise ratio (SNR) of LSCI. The current methods were less than satisfactory through intact skulls because the transcranial cortical images were of poor quality. Moreover, existing algorithms do not guarantee the accuracy of dynamic blood flow mappings. In this study, we develop an unsupervised deep learning method, named Dual-Channel in Spatial-Frequency Domain CycleGAN (SF-CycleGAN), to enhance the perceptual quality of cortical blood flow imaging by LSCI. SF-CycleGAN enabled convenient, non-invasive, and effective cortical vascular structure observation and accurate dynamic blood flow mappings without craniotomy surgeries to visualize biodynamics in an undisturbed biological environment. Our experimental results showed that SF-CycleGAN achieved a SNR at least 4.13 dB higher than that of other unsupervised methods, imaged the complete vascular morphology, and enabled the functional observation of small cortical vessels. Additionally, the proposed method showed remarkable robustness and could be generalized to various imaging configurations and image modalities, including fluorescence images, without retraining.