Extraction of Genomic DNA from Soil Samples by Polyethylene Glycol-Modified Magnetic Particles via Isopropanol Promotion and Ca2+ Mediation.

Obtaining reliable and informative DNA data from soil samples is challenging due to the presence of interfering substances and typically low DNA yields. In this work, we prepared poly(ethylene glycol)-modified magnetic particles (PEG@Fe3O4) for DNA purification. The particles leverage the facilitative effect of calcium ions (Ca2+), which act as bridges between DNA and PEG@Fe3O4 by coordinating with the phosphate groups of DNA and the hydroxyl groups on the particles. The addition of 2-propanol further enhances this Ca2+-mediated DNA adsorption by inducing a conformational change from the B-form to the more compact A-form of DNA. PEG@Fe3O4 demonstrates a DNA adsorption capacity of 144.6 mg g-1. When applied to the extraction of genomic DNA from soil samples, PEG@Fe3O4 outperforms commercial kits and traditional phenol-chloroform extraction methods in terms of DNA yield and purity. Furthermore, we developed a 16-channel automated DNA extraction device to streamline the process and reduce the extraction time. The successful amplification of target bacterial and fungal amplicons underscores the potential of this automated, device-assisted method for studying soil microbial diversity.

An Improved Method and Device for Nucleic Acid Isolation Using a High-Salt Gel Electroelution Trap.

The success of DNA analytical methods, including long-read sequencing, depends on the availability of high-quality, purified DNA. Previously, we developed a method and device for isolating high-molecular-weight (HMW) DNA for long-read sequencing using a high-salt gel electroelution trap. Here, we present an improved version of this method for purifying nucleic acids with high yield and purity from even the most challenging biological samples. The proposed method is a significant improvement over the previously published procedure, offering a simple, fast, and efficient solution for isolating HMW DNA and smaller DNA and RNA molecules. The method utilizes vertical gel electrophoresis in two nested, partially overlapping electrophoretic columns. The upper, smaller-diameter column has a thin layer of agarose gel at the bottom, which separates nucleic acids from impurities, and an electrophoresis buffer on top. After the target nucleic acid has been gel-purified on the upper column, a larger-diameter column with a layer of high-salt gel overlaid with electrophoresis buffer is inserted from below. The purified nucleic acid is then electroeluted into the buffer-filled gap between the separating gel and the high-salt gel, where excess counterions from the high-salt gel slow its migration and cause it to accumulate. The proposed vertical purification system outperforms the previously described horizontal system in terms of ease of use, speed, scalability, and compatibility with high-throughput workflows. Furthermore, the vertical system allows for the sequential purification of several nucleic acid species from the same sample using interchangeable salt-gel columns.

Preparation of DNA nanoflower-modified capillary silica monoliths for chiral separation.

Innovative chiral capillary silica monoliths (CSMs) were developed based on DNA nanoflowers (DNFs). Baseline separation of enantiomers such as atenolol, tyrosine, histidine, and nefopam was achieved by using DNF-modified CSMs, and the obtained resolution value was higher than 1.78. To further explore the effect of DNFs on enantioseparation, different types of chiral columns including DNA strand containing the complementary sequence of the template (DCT)-modified CSMs, DNF2-modified CSMs, and DNF3-modified CSMs were prepared as well. It was observed that DNF-modified CSMs displayed better chiral separation ability compared with DCT-based columns. The intra-day and inter-day repeatability of model analytes' retention time and resolution kept desirable relative standard deviation values of less than 8.28%. DNF2/DNF3-modified CSMs were able to achieve baseline separation of atenolol, propranolol, 2'-deoxyadenosine, and nefopam enantiomers. Molecular docking simulations were performed to investigate enantioselectivity mechanisms of DNA sequences for enantiomers. To indicate the successful construction of DNFs and DNF-modified CSMs, various charaterization approaches including scanning electron microscopy, agarose gel electrophoresis, dynamic light scattering analysis, electroosmotic flow, and Fourier-transform infrared spectroscopy were utilized. Moreover, the enantioseparation performance of DNF-modified CSMs was characterized in terms of sample volume, applied voltage, and buffer concentration. This work paves the way to applying DNF-based capillary electrochromatography microsystems for chiral separation.

Partitioning behavior of short DNA fragments in polymer/salt aqueous two-phase systems.

The development of liquid biopsy as a minimally invasive technique for tumor profiling has created a need for efficient biomarker extraction systems from body fluids. The analysis of circulating cell-free DNA (cfDNA) is especially promising, but the low amounts and high fragmentation of cfDNA found in plasma pose challenges to its isolation. While the potential of aqueous two-phase systems (ATPS) for the extraction and purification of various biomolecules has already been successfully established, there is limited literature on the applicability of these findings to short cfDNA-like fragments. This study presents the partitioning behavior of a 160 bp DNA fragment in polyethylene glycol (PEG)/salt ATPS at pH 7.4. The effect of PEG molecular weight, tie-line length, neutral salt additives, and phase volume ratio is evaluated to maximize DNA recovery. Selected ATPS containing a synthetic plasma solution spiked with human serum albumin and immunoglobulin G are tested to determine the separation of DNA fragments from the main plasma protein fraction. By adding 1.5% (w/w) NaCl to a 17.7% (w/w) PEG 400/17.3% (w/w) phosphate ATPS, 88% DNA recovery was achieved in the salt-rich bottom phase while over 99% of the protein was removed.

Searching for alternative high DNA-yielding bone types for DNA analysis of aged skeletal remains.

The petrous bone contains significantly higher amounts of DNA than any other human bone. Because of highly destructive sampling and because it is not always part of the recovered remains, the need for alternative sources of DNA is important. To identify additional optimal bone types, petrous bones were compared to femurs, tali, and calcanei sampled from 66 adult skeletons from two distinct modern-era Christian cemeteries. An extraction method employing full demineralization was used to obtain DNA, real-time PCR quantification to ascertain DNA quantity and degradation, and a commercial forensic short tandem repeats (STR) PCR amplification kit to determine genetic profiles. Statistical analysis was performed to explore the differences in DNA yield, DNA degradation, and success of STR amplification. A systematic studies exploring intra-skeletal variability in DNA preservation including various excavation sites differing by time period and geographical position are rare, and the second part of the investigation was based on a comparison of both archaeological sites, which allowed us to compare the effect of different post-mortem intervals and environmental conditions on DNA preservation. The older burial site in Crnomelj was active between the 13th and 18th century, whereas the more recent Polje burial was in use from the 16th to 19th century, creating different temporal and geographical environments. Results for the Crnomelj burial site revealed that the petrous bone outperformed all other bone types studied, except the calcaneus. At the Polje archeological site calcanei, tali, and femurs yielded the same STR typing success as petrous bones. The results obtained highlight the importance of careful bone sample selection for DNA analysis of aged skeletal remains. In addition to petrous bones, calcanei were found to be an alternative source of DNA when older burial sites are investigated. When more recent burial sites are processed, calcanei, tali, and femurs should be sampled besides petrous bones, not only because they exhibited good performance, but also because of easier sampling and easier grinding in the case of trabecular bones. This study contributes valuable insights into the potential use of various skeletal types as a source of DNA for investigation of aged skeletal remains, and it offers practical implications for forensic and archaeological investigations.

Fabrication of electrospun ion exchanger adsorbents with morphologies designed for the separation of proteins and plasmid DNA.

Electrospun cellulose adsorbents are an emergent class of materials applied to a variety of bioprocess separations as an analogue to conventional packed bed chromatography. Electrospun adsorbents have proven to be effective as rapid cycling media, enabling high throughput separation of proteins and viral vectors without compromising selectivity and recovery. However, there is a current lack of knowledge in relation to the manipulation and control of electrospun adsorbent structure with function and performance to cater to the separation needs of emerging, diverse biological products. In this study, a series of electrospun cellulose adsorbents were fabricated by adjusting their manufacturing conditions. A range of fiber diameters (400 to 600 nm) was created by changing the electrospinning polymer solution. Additionally, a range of porosities (0.4 to 0.7 v/v) was achieved by varying the laminating pressures on the electrospun sheets. The adsorbents were functionalized with different degrees of quaternary amine ligand density to create 18 prototype anion exchangers. Their morphology was characterized by BET nitrogen adsorption surface area, X-ray computed tomography, capillary flow porometry and scanning electron microscopy measurements. The physical characteristics of the adsorbents were used in an adapted semi-empirical model and compared to measured permeability data. Permeabilities of prototypes ranged from 10-2 to 10-4 mDarcy. The measured data showed good adherence to modelled data with possible improvements in acquiring wet adsorbent characteristics instead of dried material. Finally, the electrospun adsorbents were characterized for their binding capacity of model proteins of different sizes (diameters of 3.5 nm and 8.9 nm) and plasmid DNA. Static binding capacities ranged from 5 mg/ml to 25 mg/ml for the proteins and plasmid DNA and showed <20 % deviation from monolayer coverage based on BET surface area. Therefore, it was concluded that the electrospun adsorbents most likely adsorb monolayers of proteins and plasmid DNA on the surface with minimal steric hindrance.

Toothpick DNA extraction combined with handheld LAMP microfluidic platform for simple and rapid meat authentication.

Adulteration of meat is a global issue, necessitating rapid, inexpensive, and simple on-site testing methods. Therefore, the present study aimed to develop a one-minute toothpick-based DNA extraction method, a handheld microfluidic chip, and a smartphone-controlled portable analyzer for detecting multiple meat adulterations. A toothpick was inserted into the meat to promote DNA release and adsorption. Furthermore, a handheld microfluidic chip was designed for DNA elution on toothpicks and fluid distribution. Finally, a smartphone-actuated portable analyzer was developed to function as a heater, signal detector, and result reader. The portable device comprises a microcontroller, a fluorescence detection module, a step scanning unit, and a heating module. The proposed device is portable, and the app is user-friendly. This simple design, easy operation, and fast-response system could rapidly detect as little as 1% of simulated adulterated samples (following UK standards) within 40 min at a cost of less than USD 1 per test.

Selective extraction of genomic DNA from leopard cat (Prionailurus bengalensis), hairy-crowned deer (Elaphodus cephalophus) and muntjac (Muntiacus reevesi) using hydrophobic magnetic deep eutectic solvents.

Wild animals, as a vital component of our natural world, serve a crucial role in preserving ecological equilibrium and biodiversity. By delving into the genetic constitution of wild animal populations, the evolutionary history, genetic diversity, and adaptation mechanisms could be explored, thereby informing conservation strategies and safeguarding the future of these species. In order to study the genetic information of wild animals, it is necessary to extract high purity and high concentration of wild animal genomic DNA. In this work, a hydrophobic magnetic deep eutectic solvent (HMDES) based vortexed extraction was developed for the extraction of genomic DNA from leopard cat (Prionailurus bengalensis), hairy-crowned deer (Elaphodus cephalophus) and muntjac (Muntiacus reevesi) muscle tissue, respectively. Extraction conditions like the pH value, extraction time, temperature and the amount of HMDES used were optimized by single-factor experiments. Under the optimized condition, genomic DNA could be selectively extracted from the three animal tissues. The limits of detection (LOD) and limits of quantification (LOQ) of the proposed method were 2.86 ng/µL and 8.66 ng/µL, respectively. Meanwhile, the relative standard deviation (RSD) of the method precision and repeatability were 1.64 % and 5.57 % at 20 ng/µL, showing the method has good precision and repeatability. After extraction, the DNA extracted into the HMDES droplets can be quickly recovered and the HMDES can be recycled and reused. The method proposed is a fast, environmental-friendly and high efficient extraction strategy for purification and enrichment of genomic DNA from leopard cat, hairy-crowned deer and muntjac tissues.

DNA and fingerprint analyses of debris from improvised explosive device.

Improvised explosive devices (IEDs) can be assembled directly from daily items and are easily purchasable and distributable internationally, owing to the absence of government export permits. Hence, their origins are not readily revealed, and they can pose significant adverse effects despite their low manufacturing costs. In this study, the feasibility of identifying fingerprints and deoxyribo nucleic acid (DNA) profiles in various IEDs and samples is investigated. Additionally, the relative positions of debris are identified to set the scope of on-site inspection at terrorist scenes. All samples are categorized into porous and non-porous materials, and LMG test, extraction, quantification, and short tandem repeat (STR) analysis are conducted to view the DNA profile. For fingerprinting, 1,2-IND and CA are utilized for development, followed by quality-control analysis. Although sample acquisition is impossible in some experiments, DNA profiling and fingerprint analysis are possible for all, thus allowing mapping to be performed. This study shows that even when terrorist bombing occurs, if evidence with minimal damage is detected at the scene, then STR profiles and fingerprints can be obtained at a level suitable for AFIS usage. Furthermore, accumulating mapping results from numerous experiments significantly aids in determining the scope of evidence acquisition.

Protocol for tropical bed bug use as forensic tools.

As blood-feeding insects that feed on human hosts, bed bugs could be used in forensic investigations if they are present at a crime scene with no apparent evidence. This study describes how tropical bed bugs (Cimex hemipterus) can be used as forensic tools to collect valid human DNA samples. Short Tandem Repeat (STR) analysis was performed on collected bed bug samples, whereby the results indicate that the obtained quantities of human DNA are mostly substantial to facilitate a comprehensive genetic profiling process.

Molecular identification of haemoparasites in animals using blood lysate PCR: a quick and inexpensive alternative to purified whole genomic DNA.

Haemoparasitic diseases constitute a significant constraint to economic livestock farming. Diagnostic techniques that are inexpensive, rapid, reliable, and precise are crucial for the management of diseases. In this context, PCR assays are very valuable yet expensive since the samples must be processed before being included in the PCR reaction. Accordingly, the goal of the current study was to lower the PCR costs without jeopardizing the assay's sensitivity and specificity. For that purpose, the alkaline solution was optimized for low cost and quick DNA extraction (blood lysate), and PCR reagents were modified for optimum reaction. In comparison to purified whole blood genomic DNA, the currently developed and optimized blood lysate method was found to be 95.5% less expensive, as well as being equally sensitive and specific for the molecular detection (PCR) of haemoparasites like Babesia, Theileria, Trypanosoma and rickettsiales in cattle, buffaloes, horses, and dogs. The assay was also demonstrated to be quick, less likely to cross-contaminate, and appropriate for use in laboratories with limited resources. Therefore, the currently developed and optimized blood lysate method could serve as a viable alternative to purified whole blood genomic DNA for molecular detection (PCR) of haemoparasites in animals particularly in resource-limited settings.

Environmental gradients and optimal fixation time revealed with DNA metabarcoding of benthic sample fixative.

Assessments of biodiversity and ecosystem status can benefit from DNA metabarcoding as a means to streamline sample processing and specimen identification. Moreover, processing the fixation medium instead of the precious material introduces straightforward protocols that allow subsequent focus on certain organisms detected among the preserved specimens. In this study, we present a proof of concept via the analysis of freshwater invertebrate samples from the Tatra Mountain lakes (Slovakia). Besides highlighting a match between the lake-specific environmental conditions and the results of our fixative DNA metabarcoding, we observed an option to fine-tune the fixation time: to prefer two weeks over a day or a month. This effect emerged from the presence/absence of individual taxa rather than from coarse per-sample records of taxonomic richness, demonstrating that metabarcoding studies-and efforts to optimize their protocols-can use the robust metrics to explore even subtle trends. We also provide evidence that fixative DNA might better capture large freshwater species than terrestrial or meiofauna.

Validated DNA isolation method ensuring successful long-read sequencing of cattle semen genome.

Obtaining high-quality DNA suitable for long-read sequencing can be difficult for many types of tissues and cells, and it is a key step in current genomic studies. The challenge is even greater when it comes to isolating genomic DNA from mammalian spermatozoa, as DNA is tightly packed into a cell with a robust membrane rich in disulfide bonds. Here we describe a method for isolating high molecular weight DNA from Bovine commercial semen straws. This protocol includes a cleaning step to remove diluents and preservatives used for the long-term storage of the semen, which may affect long read sequencing. It is based on a simple salting-out method and avoid the use of spin columns, strong mixing or intensive centrifugation, in order to limit DNA fragmentation. However, we have adapted this protocol to facilitate the disruption of cell membranes and disulfide bonds with strong chaotropic and reducing agents. The average size of the fragments produced was approximately 49 kb, ranging from 25 to 85 kb, according to the femto pulse profiles.This method was used to isolate DNA from semen straws, more than 80 of them were successfully sequenced using the Continuous Long-Read (CLR) sequencing mode on the PacBio SequelII platform to study genome diversity and notably to detect large structural variations within genomes.

Novel buffer for long-term preservation of DNA in biological material at room temperature.

The collection and preservation of biological material before DNA analysis is critical for inter alia biomedical research, medical diagnostics, forensics and biodiversity conservation. In this study, we evaluate an in-house formulated buffer called the Forensic DNA Laboratory-buffer (FDL-buffer) for preservation of biological material for long term at room temperature. Human saliva stored in the buffer for 8 years, human blood stored for 3 years and delicate animal tissues from the jellyfish Pelagia noctiluca comb jelly Beroe sp., stored for 4 and 6 years respectively consistently produced high-quality DNA. FDL-buffer exhibited compatibility with standard organic, salting out and spin-column extraction methods, making it versatile and applicable to a wide range of applications, including automation.

DNA extractions were performed by Salting out, PCI, ZymoQuick and DNAeazy methods. DNA quantity and quality were assessed using qPCR, Qubit, gel electrophoresis, as well as Sanger sequencing, microsatellite profiling and SNPchip analysis.

Programmable Lanthanide Metal-Organic Framework for Ultra-Efficient Nucleic Acids Extraction and Interaction Analysis.

Efficient, mild, and reversible adsorption of nucleic acids onto nanomaterials represents a promising analytical approach for medical diagnosis. However, there is a scarcity of efficient and reversible nucleic acid adsorption nanomaterials. Additionally, the lack of comprehension of the molecular mechanisms governing their interactions poses significant challenges. These issues hinder the rational design and analytical applications of the nanomaterials. Herein, we propose an ultra-efficient nucleic acid affinity nanomaterial based on programmable lanthanide metal-organic frameworks (Ln-MOFs). Through experiments and density functional theory calculations, a rational design guideline for nucleic acid affinity of Ln-MOF was proposed, and a modular and flexible preparation scheme was provided. Then, Er-TPA (terephthalic acid) MOF emerged as the optimal candidate due to its pore size-independent adsorption and desorption capabilities for nucleic acids, enabling ultra-efficient adsorption (about 150% mass ratio) within 1 min. Furthermore, we elucidate the molecular-level mechanisms underlying the Ln-MOF adsorption of single- and double-stranded DNA and G4 structures. The affinity nanomaterial based on Ln-MOF exhibits robust nucleic acid extraction capability (4-fold higher than commercial reagent kits) and enables mild and reversible CRISPR/Cas9 functional regulation. This method holds significant promise for broad application in DNA/RNA liquid biopsy and gene editing, facilitating breakthroughs in analytical chemistry, pharmacy, and medical research.

Poly(3,4-dihydroxyphenylalanine)-modified cellulose paper for the extraction of deoxyribonucleic acid by a laboratory-built automated extraction device.

The success of polymerase chain reaction (PCR) depends on the quality of deoxyribonucleic acid (DNA) templates. This study developed a cost-effective and eco-friendly DNA extraction system utilizing poly(3,4-dihydroxyphenylalanine)-modified cellulose paper (polyDOPA@paper). PolyDOPA@paper was prepared by oxidatively self-polymerizing DOPA under weak alkaline conditions and utilizing the adhesive property of polyDOPA on different materials. Compared to the uncoated cellulose paper, polyDOPA coating significantly enhances DNA adsorption owing to its abundant amino, carboxyl, and hydroxyl moieties. The DNA extraction mechanism using polyDOPA@paper was discussed. The maximum adsorption capacity of polyDOPA@paper for DNA was 20.7 µg cm-2. Moreover, an automated extraction system was designed and fabricated using 3D printing technology. The device simplifies the operation and ensures the reproducibility and consistency of the results. More importantly, it eliminates the need for specialized training of operators. The feasibility of the polyDOPA@paper-based automated extraction system was evaluated by quantitatively detecting Escherichia coli in spiked milk samples via a real-time PCR. The detection limit was 102 cfu mL-1. The results suggest that the system would have significant potential in detecting pathogens.

A novel integrated extraction protocol for multi-omic studies in heavily degraded samples.

The combination of multi-omic techniques, such as genomics, transcriptomics, proteomics, metabolomics and epigenomics, has revolutionised studies in medical research. These techniques are employed to support biomarker discovery, better understand molecular pathways and identify novel drug targets. Despite concerted efforts in integrating omic datasets, there is an absence of protocols that integrate all four biomolecules in a single extraction process. Here, we demonstrate for the first time a minimally destructive integrated protocol for the simultaneous extraction of artificially degraded DNA, proteins, lipids and metabolites from pig brain samples. We used an MTBE-based approach to separate lipids and metabolites, followed by subsequent isolation of DNA and proteins. We have validated this protocol against standalone extraction protocols and show comparable or higher yields of all four biomolecules. This integrated protocol is key to facilitating the preservation of irreplaceable samples while promoting downstream analyses and successful data integration by removing bias from univariate dataset noise and varied distribution characteristics.

Evaluation of a New DNA Extraction Method on Challenging Bone Samples Recovered from a WWII Mass Grave.

Bones and teeth represent a common finding in ancient DNA studies and in forensic casework, even after a long burial. Genetic typing is the gold standard for the personal identification of skeletal remains, but there are two main factors involved in the successful DNA typing of such samples: (1) the set-up of an efficient DNA extraction method; (2) the identification of the most suitable skeletal element for the downstream genetic analyses. In this paper, a protocol based on the processing of 0.5 g of bone powder decalcified using Na2EDTA proved to be suitable for a semi-automated DNA extraction workflow using the Maxwell® FSC DNA IQ™ Casework Kit (Promega, Madison, WI, USA). The performance of this method in terms of DNA recovery and quality was compared with a full demineralisation extraction protocol based on Qiagen technology and kits. No statistically significant differences were scored according to the DNA recovery and DNA degradation index (p-values ≥ 0.176; r ≥ 0.907). This new DNA extraction protocol was applied to 88 bone samples (41 femurs, 19 petrous bones, 12 metacarpals and 16 molars) allegedly belonging to 27 World War II Italian soldiers found in a mass grave on the isle of Cres (Croatia). The results of the qPCR performed by the Quantifiler Human DNA Quantification kit showed values above the lowest Limit of Quantification (lLOQ; 23 pg/µL) for all petrous bones, whereas other bone types showed, in most cases, lower amounts of DNA. Replicate STR-CE analyses showed successful typing (that is, >12 markers) in all tests on the petrous bones, followed by the metacarpals (83.3%), femurs (52.2%) and teeth (20.0%). Full profiles (22/22 autosomal markers) were achieved mainly in the petrous bones (84.2%), followed by the metacarpals (41.7%). Stochastic amplification artefacts such as drop-outs or drop-ins occurred with a frequency of 1.9% in the petrous bones, whereas they were higher when the DNA recovered from other bone elements was amplified (up to 13.9% in the femurs). Overall, the results of this study confirm that petrous bone outperforms other bone elements in terms of the quantity and quality of the recovered DNA; for this reason, if available, it should always be preferred for genetic testing. In addition, our results highlight the need for accurate planning of the DVI operation, which should be carried out by a multi-disciplinary team, and the tricky issue of identifying other suitable skeletal elements for genetic testing. Overall, the results presented in this paper support the need to adopt preanalytical strategies positively related to the successful genetic testing of aged skeletal remains in order to reduce costs and the time of analysis.

Extraction of genomic DNA for sequencing from snail Helix lucorum.

Genomic studies make it possible to breakthrough in many fields such as biochemistry, physiology, phylogenetics, etc., though they are unworkable without sequences of genomic DNA of an organism. The terrestrial mollusks' genomes would benefit gastropod biology investigations, that are unavailable so far due to problems in DNA integrity and quality after the isolation procedures. Here we describe a fast and handy protocol for genomic DNA extraction from the tissues of Helix lucorum, which allows to yield high-quality samples applicable for downstream analysis such as high-throughput DNA sequencing. Troubleshooting revealed the nuclease activity of snail tissue lysate, which may be avoided by heating the lysate and decreasing the incubation time.

Eligible offender samples are missing in CODIS: A statewide approach to performing a lawfully owed DNA census.

In 2019, the Texas Department of Public Safety (TXDPS) Texas Ranger Division (TRD) identified approximately 3300 registered sex offenders (RSOs) from whom a "lawfully owed" DNA sample was missing from the Federal Bureau of Investigation's Combined DNA Index System (CODIS). Lawfully owed DNA (LODNA) is defined as a DNA sample from a qualifying offender who should have had their sample entered into CODIS, but for unknown reasons did not. As a result of those findings, TXDPS then applied for and was awarded a grant from the Bureau of Justice Assistance's Sexual Assault Kit Initiative to collect DNA specimens from these RSOs, and to perform a statewide LODNA census. TXDPS TRD sought to determine: Are the missed DNA collection problems limited to RSO's or are they occurring among individuals with a qualifying arrest or conviction as specified by state law too? What processes are used to identify individuals who are eligible for DNA sample collection? How is an individuals' DNA collection eligibility conveyed to external agencies? The findings from TXDPS' LODNA census, identified 43,245 individuals who were likely eligible for DNA collection between 1995 and 2020, therefore indicating statewide DNA collection issues. Over 4 years, collection efforts pertaining to the aforementioned lawfully owed census, have yielded 5183 LODNA sample collections, and 276 CODIS hits. This manuscript aims to create an awareness within other agencies of the importance of implementing best practices to ensure the collection and upload of LODNA from every eligible individual.