RESUMO
This narrative review provides a comprehensive analysis of the several methods and technologies employed to measure handgrip strength (HGS), a significant indicator of neuromuscular strength and overall health. The document evaluates a range of devices, from traditional dynamometers to innovative sensor-based systems, and assesses their effectiveness and application in different demographic groups. Special attention is given to the methodological aspects of HGS estimation, including the influence of device design and measurement protocols. Endogenous factors such as hand dominance and size, body mass, age and gender, as well as exogenous factors including circadian influences and psychological factors, are examined. The review identifies significant variations in the implementation of HGS measurements and interpretation of the resultant data, emphasizing the need for careful consideration of these factors when using HGS as a diagnostic or research tool. It highlights the necessity of standardizing measurement protocols to establish universal guidelines that enhance the comparability and consistency of HGS assessments across various settings and populations.
Assuntos
Força da Mão , Humanos , Força da Mão/fisiologia , Dinamômetro de Força Muscular , Feminino , MasculinoRESUMO
A novel fixation system for a hand-held dynamometer (HHD) was designed to enable isometric muscle measurements on various muscle groups of strong, healthy individuals in a field setting. The objective of this study was to evaluate the intra- and interrater reliability of the system and determine its suitability for use by multiple researchers within large-scale data collections during field activities. Four researchers tested eight healthy subjects, who each completed eight different maximal isometric muscle strength assessments using the HHD fixation system. Intraclass correlation coefficients (ICC) results were evaluated with a 95% confidence interval. ICC results for interrater reliability demonstrated excellent agreement of all eight measurements tested. ICC results for intrarater reliability demonstrated excellent agreement for six out of eight measurements. This system provides a new opportunity for several different high-quality maximal muscle strength measurements to be collected by multiple data collectors on large numbers of strong, healthy individuals in a field setting.
Assuntos
Contração Isométrica , Dinamômetro de Força Muscular , Força Muscular , Humanos , Contração Isométrica/fisiologia , Reprodutibilidade dos Testes , Masculino , Adulto , Força Muscular/fisiologia , Adulto Jovem , Feminino , Músculo Esquelético/fisiologia , Variações Dependentes do ObservadorRESUMO
This study aimed to verify the relationship between changes in thigh muscle-localized bioelectrical impedance analysis (ML-BIA) parameters and performance in a multiple-set exercise. The sample consisted of 30 female university students (22.1 ± 3.2 years). The ML-BIA parameters, including localized muscle resistance (ML-R), reactance (ML-Xc), and phase angle (ML-AngF), were evaluated using a tetrapolar bioelectric impedance device operating at a frequency of 50 KHz. The multiple sets protocol was performed with an isokinetic dynamometer. For body composition, total and leg lean soft tissue (LST) were evaluated using dual X-ray absortiometry. Student's t-test for paired samples was used to compare the ML-BIA parameters and thigh circumference pre and postexercise. Linear regression analysis was performed to verify the ∆ML-PhA as a predictor of peak torque for the three sets alone while controlling for total and leg LST. There were differences in the ML-R (∆ = 0.02 ± 1.45 Ω; p = 0.001; and E.S = 0.19), ML-Xc (∆ = 2.90 ± 4.12 Ω; p = 0.043; and E.S = 0.36), and thigh circumference (∆ = 0.82 ± 0.60 cm; p < 0.001; and E.S = 0.16) pre- and post-multiple sets. ΔML-PhA was a predictor of performance in the first set (p = 0.002), regardless of total and leg LST. However, the ΔML-PhA lost its explanatory power in the other sets (second and third), and the variables that best explained performance were total and leg LST. The ML-BIA (ML-R and ML-Xc) parameters were sensitive and changed after the multiple sets protocol, and the ΔML-PhA was a predictor of performance in the first set regardless of the total and leg LST.
Assuntos
Composição Corporal , Impedância Elétrica , Dinamômetro de Força Muscular , Músculo Esquelético , Humanos , Feminino , Adulto Jovem , Composição Corporal/fisiologia , Músculo Esquelético/fisiologia , Adulto , Coxa da Perna/fisiologia , Torque , Força Muscular/fisiologia , Exercício Físico/fisiologia , Desempenho Atlético/fisiologiaRESUMO
INTRODUCTION: Measuring rate of torque development (RTD) and peak torque (PT) for hip muscle performance presents challenges in clinical practice. This study investigated the construct validity of a handheld dynamometer (HHD) versus an isokinetic dynamometer (IKD), and intra-rater repeated reliability for RTD and PT and their relationship in hip joint movements. METHODS: Thirty healthy individuals (mean age = 30 ± 8 years, 13 males) underwent two test sessions in a single day. RTD (0-50, 0-100, 0-150, 0-200ms) and PT normalised to body mass in maximal voluntary isometric contractions were measured using a HHD and an IKD in hip flexion, extension, abduction, adduction, internal and external rotation. RESULTS: For validity between the devices, RTD0-50 exhibited the largest significant systematic bias in all hip movements (3.41-11.99 Nm·s-1 kg-1) and widest limits-of-agreement, while RTD0-200 had the lowest bias (-1.33-3.99 Nm·s-1 kg-1) and narrowest limits-of-agreement. For PT, agreement between dynamometers was observed for hip flexion (0.08 Nm·kg-1), abduction (-0.09 Nm·kg-1), internal (-0.01 Nm·kg-1), and external rotation (0.05 Nm·kg-1). For reliability, intra-rater intraclass correlation coefficient (ICC2,1) ranged from moderate to good in RTD0-50 and RTD0-100 (0.5-0.88), and good to excellent in RTD0-150 and RTD0-200 (0.87-0.95) in all movements. The HHD displayed excellent intra-rater, relative reliability values (ICC2,1) in all movements (0.85-0.95). Pearson's correlation revealed good linear correlation between PT and RTD0-150 and RTD0-200 in all movements (r = .7 to .87, p = < .001). CONCLUSION: Validity analysis demonstrated significant systematic bias and lack of agreement in RTD measures between the HHD and IKD. However, the HHD displays excellent to moderate intra-rater, relative reliability for RTD and PT measures in hip movements. Clinicians may use the HHD for hip muscle PT assessment but note, late phase RTD measures are more reliable, valid, and relate to PT than early phase RTD. Additionally, the correlation between RTD and PT at various time epochs was examined to better understand the relationship between these measures.
Assuntos
Articulação do Quadril , Contração Isométrica , Dinamômetro de Força Muscular , Torque , Humanos , Masculino , Adulto , Feminino , Articulação do Quadril/fisiologia , Reprodutibilidade dos Testes , Contração Isométrica/fisiologia , Amplitude de Movimento Articular/fisiologia , Adulto Jovem , Músculo Esquelético/fisiologiaRESUMO
OBJECTIVES: To investigate the intra-rater reliability and validity of belt-stabilized and tension dynamometry to assess hip muscle strength and power. DESIGN: Repeated measures. SETTING: Biomechanics laboratory. PARTICIPANTS: Seventeen uninjured adults (age = 22.0 ± 2.3y; 13 females). MAIN OUTCOMES MEASURES: Peak torque (strength) and rate of torque development (RTD; power) were measured for hip abduction, internal rotation, external rotation and extension using an isokinetic dynamometer, and belt-stabilized and tension dynamometry. RESULTS: For peak torque assessment, belt-stabilized and tension dynamometry showed good (Intraclass Correlation Coefficient [ICC] = 0.848-0.899) and good-to-excellent (ICC = 0.848-0.942) reliability, respectively. For RTD, belt-stabilized dynamometry showed fair reliability for abduction (ICC = 0.524) and good reliability for hip internal rotation, external rotation, and extension (ICC = 0.702-0.899). Tension dynamometry showed good reliability for all motions when measuring RTD (ICC = 0.737-0.897). Compared to isokinetic dynamometry, belt-stabilized and tension dynamometry showed good-to-excellent correlations for peak torque assessment (r = 0.503-0.870), and fair-to-good correlations for RTD (r = 0.438-0.674). Bland-Altman analysis showed that measures from belt-stabilized and tension dynamometry had clinically meaningful disagreement with isokinetic dynamometry. CONCLUSION: Tension dynamometry is reliable for assessing hip strength and power in all assessed motions. Belt-stabilized dynamometry is reliable for assessing internal rotation, external rotation, and extension. Validity of both methods is questionable, considering the lack of agreement with isokinetic dynamometry.
Assuntos
Dinamômetro de Força Muscular , Força Muscular , Torque , Humanos , Feminino , Masculino , Força Muscular/fisiologia , Reprodutibilidade dos Testes , Adulto Jovem , Adulto , Quadril/fisiologia , Articulação do Quadril/fisiologia , Amplitude de Movimento Articular/fisiologia , Músculo Esquelético/fisiologiaRESUMO
Background: Grip strength is important for fine motor skills, and one of the measurement tools for grip strength is the Martin Vigorimeter (MV) dynamometer. Studies on establishing the reliability and validity of the MV in Koreans are limited. We aimed to establish the reliability and validity of the MV for grip strength measurement in healthy Korean adults by comparing it with the Jamar dynamometer, the standard tool used by the American Society of Hand Therapists. Methods: In total, 99 healthy participants (50 men and 49 women) were enrolled. Grip strength was measured using the Jamar dynamometer and MV. Reliability and validity were assessed using the intraclass correlation coefficient (ICC) and minimal detectable change (MDC). The correlation between the measurements of the instruments was analyzed using Pearson's correlation. The effect of hand anthropometry was evaluated, and the conversion equation between the instruments was calculated. Results: MV showed excellent reliability (ICC > 0.90, p < 0.001) and validity with a high correlation (0.7 ≤ r < 0.9) with the Jamar dynamometer. The MDC was acceptable for detecting minimal clinically important differences (< 19.5%) in both instruments (Jamar: 3.4%-6.7%, MV: 3.8% to 6.3%). The grip strength measured using the MV was independent of hand anthropometry, unlike that using the Jamar dynamometer. Conclusions: This study provides insights into the relationship between the Jamar and MV instruments for measuring grip strength in Koreans. The MV is a viable alternative to the Jamar dynamometer in Koreans, offering not only reproducible and reliable measurements of grip strength but also the advantage of being unaffected by variations in hand anthropometry.
Assuntos
Força da Mão , Dinamômetro de Força Muscular , Humanos , Força da Mão/fisiologia , Masculino , Feminino , Adulto , Reprodutibilidade dos Testes , República da Coreia , Pessoa de Meia-Idade , Adulto JovemRESUMO
The measurement of isometric muscle torque with hand-held dynamometry is a technique little studied in the pediatric setting for the evaluation of maximal isometric muscle strength. OBJECTIVE: to determine the reliability of hand-held dynamometry to obtain the maximal isometric torque of upper and lower limb muscle groups in Chilean children and adolescents. PATIENTS AND METHODS: Crosssectional study. Seventy-two participants aged between 7 and 15 years were selected from a school in Talca. Maximal isometric torque was recorded in 15 muscle groups of upper and lower limbs through hand-held dynamometry. Intra- and inter-rater evaluation was used, applying the intraclass correlation coefficient (ICC) to determine the reliability of the tests and Bland-Altman plots to evaluate concordance. RESULTS: The results demonstrated good to excellent inter-rater reliability (ICC = 0.850.98) and intra-rater reliability (ICC = 0.87-0.98). Only two groups, hip extensors and abductors, showed good inter-rater reliability (ICC = 0.85 and ICC = 0.88, respectively); and one group, the ankle dorsiflexors, showed good intra-rater reliability (ICC = 0.87). 100% of the tests presented at least 95.8% inter- and intra-rater agreement on the Bland-Altman plots. CONCLUSION: The evaluation of isometric muscle torque using hand-held dynamometry is a reliable procedure for use in different growth periods.
Assuntos
Contração Isométrica , Dinamômetro de Força Muscular , Força Muscular , Torque , Humanos , Criança , Adolescente , Reprodutibilidade dos Testes , Masculino , Feminino , Estudos Transversais , Chile , Contração Isométrica/fisiologia , Força Muscular/fisiologia , Músculo Esquelético/fisiologia , Variações Dependentes do Observador , Extremidade Inferior/fisiologiaRESUMO
The reliability of the fixed-frame dynamometer for measuring isometric neck strength is established, but with limited field-based applications. This study aimed to establish the inter- and intra-session reliability of the peak force for neck flexors, extensors, and side flexors using the VALD ForceFrame and DynaMo and the force-time characteristics in the quadruped position (ForceFrame). Twenty-seven recreationally active males performed three repetitions of isometric neck flexion, extension, and side flexion over two sessions in random order using the VALD ForceFrame and DynaMo. Both devices demonstrated acceptable reliability, with the Forceframe ICC > 0.8 and CV% < 13.8% and the DynaMo ICC > 0.76 and CV% < 13.8%. No systematic or proportional differences were found using the Passing-Bablock procedure, and Bland-Altman analysis confirmed agreement across measures. Reliability was shown for right-side (ICC > 0.76) and left-side (ICC > 0.79) flexion and flexion (ICC > 0.75) across 50, 100, 150, and 200 ms. Statistical parametric mapping indicated no differences in ForceFrame-generated isometric force-time curves between sessions, though the CV was highest in the force development phase. The findings suggest that both tools can reliably assess neck strength, supporting their use in sports and clinical settings. However, assessment methods are not interchangeable, emphasising the need for standardised neck strength assessment approaches.
Assuntos
Contração Isométrica , Força Muscular , Humanos , Masculino , Contração Isométrica/fisiologia , Força Muscular/fisiologia , Adulto , Adulto Jovem , Músculos do Pescoço/fisiologia , Reprodutibilidade dos Testes , Dinamômetro de Força Muscular , Pescoço/fisiologiaRESUMO
OBJECTIVES: To explore the effects of different test positions on quantitative muscle strength of wrist and finger flexor muscle groups and to establish a standardized muscle strength test protocol for each muscle group. METHODS: Forty healthy subjects (12 males and 28 females) were recruited. A portable digital quantitative muscle strength tester, Micro FET2TM, was used to measure the flexor muscle strength of each finger and the wrist joint at the 30° extension, 0° neutral, and 30° flexion, respectively. Palmar abduction strength of the thumb was measured at 30° and 60°, respectively. Ten subjects were randomly selected from the 40 subjects, and the quantitative muscle strength of each muscle group was tested again by the same operator after an interval of 10 to 15 days. RESULTS: Except for the fact that in males, there was no significant difference in flexor muscle strength of thumb and wrist joint between 30° of wrist extension and neutral 0° position, the muscle strength of the other fingers flexion and wrist palmar flexor showed the following characteristicsï¼30° of wrist extension > neutral 0° position > 30° of flexion, and the PAST was 30°>60°; The flexor muscle strength of all the subjects was thumb > index finger > middle finger > ring finger > little finger; All muscle strength values of male were greater than those of female, and the difference was statistically significant (P<0.05); There was no significant difference between the left and right side muscle strength values of all subjects (P>0.05). The reliability of muscle strength values measured at different times in 10 subjects was good. CONCLUSIONS: The quantitative muscle strength of each muscle group of the hand and wrist is affected by the test position, and a standardized and uniformed test position should be adopted in the actual identification. Micro FET2TM has good reliability for hand and wrist quantitative muscle strength testing. The 30° extension of the wrist can be used as the best standardized test position for the flexion muscle strength of each finger and wrist joint. The 30° position can be used as the best standardized test position for PAST.
Assuntos
Dedos , Força Muscular , Músculo Esquelético , Articulação do Punho , Humanos , Masculino , Feminino , Dedos/fisiologia , Músculo Esquelético/fisiologia , Adulto , Força Muscular/fisiologia , Adulto Jovem , Articulação do Punho/fisiologia , Punho/fisiologia , Força da Mão/fisiologia , Amplitude de Movimento Articular/fisiologia , Postura/fisiologia , Dinamômetro de Força Muscular , Polegar/fisiologia , Articulações dos Dedos/fisiologia , Reprodutibilidade dos TestesRESUMO
BACKGROUND: Lower limb injury rates have increased dramatically in line with increased female sport participation levels. Muscle strength is a modifiable lower limb injury risk factor, guiding performance monitoring and rehabilitation. OBJECTIVES: The aim of this study was to investigate the test-retest reliability of isokinetic and isometric lower limb peak torque to body mass of muscles acting on the hip, knee, and ankle in female team sport athletes. It was hypothesised the test-retest reliability would be good (intraclass correlation coefficients (ICC) ≥ 0.75). METHODS: Thirty-eight female athletes (Australian Rules Football = 18, netball = 12, soccer = 8) aged 16-35 years participated in this study. Participants performed isokinetic (60°/s and 120°/s) and isometric testing on a Biodex Isokinetic Dynamometer on three separate days. RESULTS: Poor to good reliability was demonstrated for all joint movements (ICC = 0.38-0.88) with small to moderate effect sizes (0.00-0.43) and typical errors (5.65-24.49). CONCLUSION: Differences in peak torque to body mass were observed between sessions one and two and/or one and three, demonstrating a learning effect. Therefore, three testing sessions, and/or the inclusion of a familiarisation session, is recommended for future assessments in populations unfamiliar with dynamometry.
Assuntos
Atletas , Extremidade Inferior , Força Muscular , Torque , Humanos , Feminino , Força Muscular/fisiologia , Reprodutibilidade dos Testes , Adolescente , Extremidade Inferior/fisiologia , Adulto Jovem , Adulto , Dinamômetro de Força Muscular , Esportes de Equipe , Contração Isométrica/fisiologiaRESUMO
BACKGROUND: Sarcopenia is associated with many adverse outcomes in patients with cirrhosis. The tools currently in use for assessing sarcopenia have numerous flaws. We evaluated the utility of portable ultrasonography and a dynamometer for the bedside assessment of sarcopenia and its implications in hospitalized cirrhosis patients. METHODS: A dynamometer was used to test the hand-grip strength (HGS) and ultrasound was used to measure the thickness of the forearm and quadriceps muscles. HGS value < 27 kg for men and < 16 kg for women was taken as significant according to the European Working Group on Sarcopenia in Older People (EWGSOP2) criteria. The lower normal limit of muscle mass (5th percentile) was determined on 100 matched healthy controls. RESULTS: According to the EWGSOP2 criteria and HGS values, the prevalence of sarcopenia and probable sarcopenia among 300 cirrhosis patients were 56% and 62.3%, respectively. HGS alone identified sarcopenia in 88.9% of patients, while overestimated it in 6.3% of cases. The prevalence rate of sarcopenic obesity was 11%. Compared to patients without sarcopenia, sarcopenic patients had more complications of cirrhosis such as ascites, variceal bleeding, hepatic encephalopathy, spontaneous bacterial peritonitis, sepsis, hepatorenal syndrome and refractory ascites. In-hospital (p = 0.037), three-month (p < 0.001), and six-month (p < 0.001) mortality rates were all higher among sarcopenic patients. On cox regression survival analysis, overall six-month mortality was significantly higher in sarcopenic patients compared to patients without sarcopenia (hazard ratio, 6.37; 95% confidence interval, 3.15-12.8, p < 0.001). CONCLUSION: Bedside assessment of sarcopenia using a portable ultrasound machine and a dynamometer detects liver cirrhosis patients with high risk of complications and mortality.
Assuntos
Força da Mão , Hospitalização , Cirrose Hepática , Sarcopenia , Ultrassonografia , Humanos , Sarcopenia/etiologia , Sarcopenia/diagnóstico , Sarcopenia/complicações , Sarcopenia/diagnóstico por imagem , Cirrose Hepática/complicações , Masculino , Feminino , Pessoa de Meia-Idade , Prevalência , Testes Imediatos , Idoso , Adulto , Dinamômetro de Força MuscularRESUMO
IMPORTANCE: Occupational therapy practitioners need modern tools for the assessment of maximal grip strength in clinical and remote settings. OBJECTIVE: To establish the (1) interrater reliability and (2) precision of the GripAble among three raters with different expertise in occupational therapy when testing healthy participants, and to (3) evaluate the relative reliabilities of different approaches to estimating grip strength (i.e., one trial, mean of two trials, and the mean of three trials). DESIGN: Measurement study. SETTING: Minnesota Translational Musculoskeletal and Occupational Performance Research Lab, University of Minnesota, Minneapolis. PARTICIPANTS: Thirty volunteers, age ≥18 yr, without any hand problems. OUTCOMES AND MEASURES: Using GripAble, three occupational therapy raters with varied experience measured the maximal grip strength of the dominant and nondominant hands of all participants. Using the mean of three trials when testing grip strength with GripAble adds precision. RESULTS: GripAble has excellent interrater reliability (i.e., intraclass correlation coefficient > .75) and acceptable precision (minimal detectable change < 15%) among healthy adults. CONCLUSIONS AND RELEVANCE: GripAble allows occupational therapy practitioners with different experiences to assess grip strength in healthy hands quickly, precisely, and with excellent reliability. Additional research is needed on its psychometrics in clinical populations and capacities in remote monitoring and exergaming. Plain-Language Summary: The results of this study show that grip strength, an important biomarker and commonly assessed construct in occupational therapy, can be evaluated reliably, precisely, and rapidly with GripAble. The use of GripAble by occupational therapy practitioners in clinical settings may help to build an infrastructure for remote measurements and exergaming interventions in the future.
Assuntos
Força da Mão , Terapia Ocupacional , Humanos , Força da Mão/fisiologia , Masculino , Reprodutibilidade dos Testes , Feminino , Adulto , Terapia Ocupacional/métodos , Pessoa de Meia-Idade , Variações Dependentes do Observador , Adulto Jovem , Dinamômetro de Força MuscularRESUMO
While resistance training promotes muscle hypertrophy and strength, accessibility of equipment is a barrier. This study evaluated a wearable VAriable Resistance Suit (VARS) as a novel and alternative method to achieve muscle strength improvement. It was hypothesized that by providing adjustable, bi-directional and speed dependent resistance, VARS can target specific muscles to improve muscle strength via an accessible and portable device. Twelve untrained healthy male adults (22.08 ± 4.1 years old) participated in an 8-week long resistance training using VARS to strengthen four muscles (biceps brachii, triceps brachii, biceps femoris, rectus femoris) of their non-dominant arm and leg using VARS. The results showed significant improvements in the muscle strength measured by isokinetic dynamometer - 49.9±9.6% increase in isokinetic force and 30.6±7.6% increase in isometric force. Muscle size and body composition were also assessed using ultrasound imaging and bioelectrical impedance analysis, which did not show significant changes. The study demonstrates the efficacy and feasibility of VARS as a resistance training tool to achieve muscle strength improvement and its potential extension to clinical populations.
Assuntos
Voluntários Saudáveis , Contração Isométrica , Força Muscular , Músculo Esquelético , Treinamento Resistido , Humanos , Masculino , Treinamento Resistido/métodos , Força Muscular/fisiologia , Adulto Jovem , Contração Isométrica/fisiologia , Adulto , Músculo Esquelético/fisiologia , Dinamômetro de Força Muscular , Dispositivos Eletrônicos Vestíveis , Composição Corporal , Impedância Elétrica , Braço/fisiologia , Perna (Membro)/fisiologiaRESUMO
BACKGROUND: Frailty is a geriatric syndrome characterized by increased individual vulnerability with an increase in both dependence and mortality when exposed to external stressors. The use of Frailty Indices in routine clinical practice is limited by several factors, such as the cognitive status of the patient, times of consultation, or lack of prior information from the patient. OBJECTIVES: In this study, we propose the generation of an objective measure of frailty, based on the signal from hand grip strength (HGS). DESIGN AND MEASUREMENTS: This signal was recorded with a modified Deyard dynamometer and processed using machine learning strategies based on supervised learning methods to train classifiers. A database was generated from a cohort of 138 older adults in a transverse pilot study that combined classical geriatric questionnaires with physiological data. PARTICIPANTS: Participants were patients selected by geriatricians of medical services provided by collaborating entities. SETTING AND RESULTS: To process the generated information 20 selected significant features of the HGS dataset were filtered, cleaned, and extracted. A technique based on a combination of the Synthetic Minority Oversampling Technique (SMOTE) to generate new samples from the smallest group and ENN (technique based on K-nearest neighbors) to remove noisy samples provided the best results as a well-balanced distribution of data. CONCLUSION: A Random Forest Classifier was trained to predict the frailty label with 92.9% of accuracy, achieving sensitivities higher than 90%.
Assuntos
Fragilidade , Avaliação Geriátrica , Força da Mão , Humanos , Força da Mão/fisiologia , Idoso , Feminino , Masculino , Fragilidade/diagnóstico , Avaliação Geriátrica/métodos , Idoso de 80 Anos ou mais , Projetos Piloto , Idoso Fragilizado , Aprendizado de Máquina , Dinamômetro de Força MuscularRESUMO
CONTEXT: The hip adductor and abductor muscles play vital roles as stabilizers in the lower-extremity. Their activation during soccer-specific actions is essential, but local muscular fatigue can hinder athletic performance and increase the risk of injury. DESIGN: This study aimed to observe the variations in frontal plane hip strength in female college soccer players before and after a high-workload soccer-specific training session. Furthermore, the study sought to compare the relative changes in hip strength with the internal and external load measures obtained during that session. METHODS: Twenty female college soccer players participated in a retrospective observational study. Isometric hip adductor and abductor strength were measured before and after a training session in the college spring season. Measurements were taken with a handheld dynamometer (MicroFET 2) while the players were supine. Global positioning system sensors (Catapult Vector S7), commonly worn by players during training sessions and competitive matches, were used to measure external and internal loads. Statistical analyses were performed using paired samples t test to assess hip adductor and abductor strength changes before and after the training session. Spearman rank was used to identify correlation coefficients between global positioning system data and isometric hip strength. RESULTS: The findings revealed significant decreases in the strength of the right hip adduction (P = .012, -7% relative change), right abduction (P = .009, -7.6% relative change), and left abduction (P = .016, -4.9% relative change) after the training session. Furthermore, relative decreases in hip isometric adduction and abduction strength are related to the distance covered at high speeds. CONCLUSION: The results of this study highlight that hip isometric adduction and abduction strength tend to decrease after exposure to high workloads during soccer-specific training.
Assuntos
Quadril , Contração Isométrica , Força Muscular , Futebol , Humanos , Futebol/fisiologia , Feminino , Força Muscular/fisiologia , Adulto Jovem , Estudos Retrospectivos , Quadril/fisiologia , Contração Isométrica/fisiologia , Músculo Esquelético/fisiologia , Sistemas de Informação Geográfica , Adolescente , Dinamômetro de Força MuscularRESUMO
CONTEXT: The aim of this study was to investigate the effects of 8-week ballistic-strength-training program using a validated specific throwing device (ie, Arm/Shoulder Specific Strength Device), on isokinetic shoulders' rotation muscle-torques and ratios as well as range of motion in team handball players. DESIGN: A repeated-measures experimental design with a randomized controlled trial was used. METHODS: Twenty-six high-level competitive male U-19 team handball players were randomly assigned into training (TG, n = 15) and control (n = 11) groups. The TG undertook a twice a week for 8-week periodized throws program with an individually predetermined optimal load. The program incorporated shackled eccentric and concentric exercises using the Arm/Shoulder Specific Strength Device. Peak torques, functional, and conventional ratios for both arms at different angular velocities (60°·s-1, 180°·s-1, and 300°·s-1) were assessed over time and between groups, using an isokinetic dynamometer. RESULTS: A significant improvement for TG (P < .01; d = 1.13 [moderate]; +20.2%) of the concentric peak torques for dominant arm in external rotation was observed at 300°·s-1. Significant (P < .05-.01) increases were also noted for nondominant arm at the 3 studied angular velocities. In addition, 300°·s-1 eccentric peak torques of the dominant arm and nondominant arm have significantly improved for both external and internal rotations (P < .05; d = .99 [moderate] and d = 1.21 [large]; +15.7% and + 17.9%, respectively) with small changes at the other angular assessed velocities. Posttraining, TG's dominant arm showed significant improvements (P < .05-.01) in functional and conventional ratios at all velocities. Notably, significant differences (P < .05-.01) were observed at 60°·s-1 and across all velocities when comparing the TG with the control group. TG showed significant increase for internal rotation and external rotation shoulder range of motions (P < .05; d = 1.22-1.27 [large]), +5.0% and +7.7%, respectively). CONCLUSIONS: The specific 8-week throwing training program on the Arm/Shoulder Specific Strength Device showed significant performance improvements in almost all assessed isokinetic concentric and eccentric peak torques as well as internal and external range of motion increase for both arms while ensuring rotator cuff torque ratios and shoulder mobility in team handball real sport-specific condition.
Assuntos
Força Muscular , Músculo Esquelético , Amplitude de Movimento Articular , Treinamento Resistido , Ombro , Torque , Humanos , Masculino , Treinamento Resistido/instrumentação , Treinamento Resistido/métodos , Adulto Jovem , Amplitude de Movimento Articular/fisiologia , Ombro/fisiologia , Músculo Esquelético/fisiologia , Força Muscular/fisiologia , Rotação , Dinamômetro de Força MuscularRESUMO
Background and Objectives: Biodex System® is an advanced dynamometer used for testing various biomechanical parameters of muscles. Test outcomes allow for the identification of muscle pathology and consequently lead to a clinical diagnosis. Despite being widely used for the testing and rehabilitation of the human musculoskeletal system, no universal and acceptable protocol for wrist examination has been proposed for patients with wrist pathology. In this study, the authors aim to identify the most appropriate protocol for testing the biomechanical parameters of flexors and extensors of the wrist. Materials and Methods: A group of 20 patients with symptomatic tennis elbow and 26 healthy volunteers were examined using three different protocols: isokinetic, isometric and isotonic. Protocol order for each study participant was assigned at random with a minimum of a 24 h break between protocols. All protocol parameters were set according to data obtained from a literature review and an earlier pilot study. Following completion of each protocol, participants filled out a questionnaire-based protocol, assessing pain intensity during the exam, difficulty with exam performance and post-exam muscle fatigue. Results: The isotonic protocol showed the best patient tolerance and the highest questionnaire score. There was a significant difference (p < 0.05) between the three protocols in average pain intensity reported by study participants. All participants completed the isotonic protocol, but not all patients with symptomatic tennis elbow were able to complete the isometric and isokinetic protocols. The isotonic protocol was deemed "difficult but possible to complete" by study participants. Conclusions: The isotonic protocol is most suitable for testing the flexors and extensors of the wrist. It gives the most biomechanical data of all protocols, is well tolerated by patients and rarely causes pain during examination even in symptomatic participants.
Assuntos
Dinamômetro de Força Muscular , Cotovelo de Tenista , Punho , Humanos , Masculino , Adulto , Feminino , Fenômenos Biomecânicos , Cotovelo de Tenista/fisiopatologia , Cotovelo de Tenista/diagnóstico , Punho/fisiologia , Punho/fisiopatologia , Pessoa de Meia-Idade , Músculo Esquelético/fisiologia , Músculo Esquelético/fisiopatologia , Contração Isométrica/fisiologia , Inquéritos e Questionários , Contração Isotônica/fisiologiaRESUMO
OBJECTIVES: To investigate the relationships between handheld dynamometer (HHD), isokinetic and Nordic hamstrings exercise (NHE) measurements of knee flexor strength and their association with sprinting performance. DESIGN: Cross-sectional. METHODS: The relationships between HHD (prone isometric, prone break and supine break knee flexor strength tests), isokinetic and NHE peak knee flexor strength measures were examined using Pearson product correlations on 38 female footballers. A linear regression analysis was also performed for each pair of dependent variables (10 and 30 metre sprint times) and independent predictor variables (average relative peak torque for HHD, isokinetic and NHE testing). RESULTS: There were good correlations between HHD tests (r = 0.81-0.90, p < 0.001, R2 = 0.65-0.82), moderate correlations between HHD and isokinetic peak torque, (r = 0.61-0.67, p < 0.001, R2 = 0.37-0.44) and poor association between the HHD peak torques and isokinetic work (r = 0.44-0.46, p = 0.005-0.007, R2 = 0.20-0.21) and average power (r = 0.39-0.45, n = 36, p = 0.006-0.019, R2 = 0.15-0.22). There was a poor association between NHE peak torque and isokinetic total work (r = 0.34, p = 0.04, R2 = 0.12). No associations between knee flexor strength and sprint times were observed (p = 0.12-0.79, r2 = 0.002-0.086). CONCLUSIONS: Moderate to good correlations within HHD testing and poor to moderate correlations between HHD and isokinetic testing were observed. HHD knee flexor torque assessment may be useful to regularly chart the progress of hamstring rehabilitation for female footballers. Knee flexor strength assessments were not associated with sprint times in female footballers. Other aspects of knee flexor strength and sprint performance should be investigated to assist clinicians in making return to running and sprinting decisions in this population.
Assuntos
Desempenho Atlético , Músculos Isquiossurais , Força Muscular , Corrida , Humanos , Feminino , Força Muscular/fisiologia , Músculos Isquiossurais/fisiologia , Estudos Transversais , Adulto Jovem , Corrida/fisiologia , Desempenho Atlético/fisiologia , Modelos Lineares , Adulto , Dinamômetro de Força Muscular , Adolescente , Torque , Joelho/fisiologiaRESUMO
Introduction: The risk of falls among the elderly significantly increases, which has become a serious public health concern. Falls can not only lead to serious complications such as fractures and brain injuries but also limit their mobility function, reducing quality of life. Foot intrinsic muscles (FIMs) are an essential part of foot core stability even overall postural stability. This study aimed to investigate the effects of aging on the function of FIMs and to explore the influence of FIMs on postural control in the elderly. Materials and Methods: 56 healthy old participants (60-75 years) and 57 healthy young participants (18-29 years) joined this study. An ergoFet dynamometer was used to determine foot muscle strength (Doming, T1, T23 and T2345), and ankle muscle strength (plantarflexion and dorsiflexion). The morphology of FIMs and extrinsic foot muscle was determined using a Doppler ultrasound system, whereas the postural stability was assessed through Limits of Stability test. Independent samples t-test was used to determine the differences in strength and morphological parameters and Spearman correlation analysis was used to determine whether an association existed between muscle strength and postural stability parameters in the elderly. Results: Compared with young adults, foot muscle strength and ankle muscle strength (Doming, T1, T23, T2345, dorsiflexion, and plantarflexion, all p <0.05) and the morphology of foot muscles (all p <0.05) were significantly reduced in the elderly. The strength of FIMs and the limit of stability (r = 0.302-0.424, all p <0.05) were significantly correlated in the elderly. Conclusion: Compared with young adults, the weakness of strength as well as the morphological decline of the intrinsic and extrinsic foot muscles were found in the elderly. In addition, a correlation was observed between FIM's strength and postural stability in the elderly, suggesting their potential role in posture stability.
Assuntos
Pé , Força Muscular , Músculo Esquelético , Equilíbrio Postural , Humanos , Equilíbrio Postural/fisiologia , Pessoa de Meia-Idade , Feminino , Masculino , Idoso , Adulto , Pé/fisiologia , Músculo Esquelético/fisiologia , Adulto Jovem , Envelhecimento/fisiologia , Dinamômetro de Força Muscular , Adolescente , Acidentes por Quedas/prevenção & controleRESUMO
OBJECTIVES: To verify the effectiveness of the use of a modified position of the Copenhagen Adduction (CA) stage 1 compared to the original position. DESIGN: Cross-sectional study. SETTING: Laboratory. PARTICIPANTS: 31 healthy men aged 23.7 ± 1.9 years with no recent or chronic general pathology. MAIN OUTCOME MEASURES: Differences between EMG amplitudes for the adductor longus (AL), rectus femoris (RF) and semi tendinous (ST) during dynamic contractions and adductor maximal isometric voluntary contraction (MIVC) force values between CA stage 1 standard and modified positions were assessed with either Wilcoxon or paired t-test. RESULTS: No significant differences were observed for EMG amplitudes of the AL (p-value = 0.724) and for the RF muscle (p-value = 0.337) and for the adductor force (p-value = 0.361) between the two positions. A significant difference was obtained for the ST (p-value<0.001) mainly explained by the adapted position of the non-dominant leg which unlocked the hip joint and generated less muscle activity in the hamstrings. CONCLUSIONS: Muscle activity of the AL muscle and adductor force being similar in both positions, the CA stage 1 modified position could be of interest for rehabilitation after adductor injury or strengthening of the adductors in elite athletes.