A doxycycline-loaded microfiber of poly-metformin/PCL for eradicating melanoma stem cells.

Nowadays, electrospun fibrous mats are used as drug delivery systems for loading of potential drugs in order to kill cancer cells. In the study, a skin patch for treating melanoma cancer after surgery was made using polycaprolactone and polymetformin microfibers that were loaded with doxycycline (PolyMet/PCL@DOX), an anti-cancer stem cell agent. The morphology, structure, mechanical characteristics, swelling, and porosity of the electrospun microfibers were examined. Drug release andanticancereffectiveness of PolyMet/PCL@DOXwas evaluated against A375 melanoma cancer stem cells using the MTS, Flow cytometry, colony formation and CD44 expression assays. Scanning electron microscopy (SEM) verified the micro fibrous structure with a diameter of about 2.31 µm. The porosity and swelling percentages for microfibers was 73.5 % and 2.9 %, respectively. The tensile strength at the breaking point was equal to 3.84 MPa. The IC50 of PolyMet/PCL@DOX was 7.4 µg/mL. The survival rate of A375 cells after 72 h of PolyMet/PCL@DOX treatment was 43.9 %. The colony formation capacity of A375 cells decreased after PolyMet/PCL@DOX treatment. The level of CD44 expression in the PolyMet/PCL@DOX group decreased compared to the control group. Generally, PolyMet/PCL@DOX microfibers can be a promising candidate as a patch after surgery to eradicate cancer stem cells, effectively.

Antibacterial and Osteogenic Doxycycline Imprinted Bioglass Microspheres to Combat Bone Infection.

Currently, postoperative infection is a significant challenge in bone and dental surgical procedures, demanding the exploration of innovative approaches due to the prevalence of antibiotic-resistant bacteria. This study aims to develop a strategy for controlled and smart antibiotic release while accelerating osteogenesis to expedite bone healing. In this regard, temperature-responsive doxycycline (DOX) imprinted bioglass microspheres (BGMs) were synthesized. Following the formation of chitosan-modified BGMs, poly N-isopropylacrylamide (pNIPAm) was used for surface imprinting of DOX. The temperature-responsive molecularly imprinted polymers (MIPs) exhibited pH and temperature dual-responsive adsorption and controlled-release properties for DOX. The temperature-responsive MIP was optimized by investigating the molar ratio of N,N'-methylene bis(acrylamide) (MBA, the cross-linker) to NIPAm. Our results demonstrated that the MIPs showed superior adsorption capacity (96.85 mg/g at 35 °C, pH = 7) than nonimprinted polymers (NIPs) and manifested a favorable selectivity toward DOX. The adsorption behavior of DOX on the MIPs fit well with the Langmuir model and the pseudo-second-order kinetic model. Drug release studies demonstrated a controlled release of DOX due to imprinted cavities, which were fitted with the Korsmeyer-Peppas kinetic model. DOX-imprinted BGMs also revealed comparable antibacterial effects against Staphylococcus aureus and Escherichia coli to the DOX (control). In addition, MIPs promoted viability and osteogenic differentiation of MG63 osteoblast-like cells. Overall, the findings demonstrate the significant potential of DOX-imprinted BGMs for use in bone defects. Nonetheless, further in vitro investigations and subsequent in vivo experiments are warranted to advance this research.

Inhibitory effect of doxycycline conjugated with deoxycholic acid and polyethylenimine conjugate on nasal fibroblast differentiation and extracellular production.

BACKGROUND: Chronic rhinosinusitis (CRS) is an inflammatory disease affecting the sinuses or nose. Persistent inflammatory responses can lead to tissue remodeling, which is a pathological characteristics of CRS. Activation of fibroblasts in the nasal mucosal stroma, differentiation and collagen deposition, and subepithelial fibrosis have been associated with CRS. OBJECTIVES: We aimed to assess the inhibitory effects of doxycycline and deoxycholic acid-polyethyleneimine conjugate (DA3-Doxy) on myofibroblast differentiation and extracellular matrix (ECM) production in nasal fibroblasts stimulated with TGF-ß1. METHODS: To enhance efficacy, we prepared DA3-Doxy using a conjugate of low-molecular-weight polyethyleneimine (PEI) (MW 1800) and deoxycholic acid (DA) and Doxy. The synthesis of the DA3-Doxy polymer was confirmed using nuclear magnetic resonance, and the critical micelle concentration required for cationic micelle formation through self-assembly was determined. Subsequently, the Doxy loading efficiency of DA3 was assessed. The cytotoxicity of Doxy, DA3, PEI, and DA-Doxy in nasal fibroblasts was evaluated using the WST-1 assay. The anti-tissue remodeling and anti-inflammatory effects of DA3-Doxy and DA3 were examined using real-time polymerase chain reaction (Real-time PCR), immunocytochemistry, western blot, and Sircol assay. RESULTS: Both DA3 and DA3-Doxy exhibited cytotoxicity at 10 µg/ml in nasal fibroblasts. Doxy partially inhibited α-smooth muscle actin, collagen types I and III, and fibronectin. However, DA3-Doxy significantly inhibited α-SMA, collagen types I and III, and fibronectin at 5 µg/ml. DA3-Doxy also modulated TGF-ß1-induced changes in the expression of MMP 1, 2, and 9. Nonetheless, TGF-ß1-induced expression of MMP3 was further increased by DA3-Doxy. The expression of TIMP 1 and 2 was partially reduced with 5 µg/ml DA3-Doxy. CONCLUSIONS: Although initially developed for the delivery of genetic materials or drugs, DA3 exhibits inhibitory effects on myofibroblast differentiation and ECM production. Therefore, it holds therapeutic potential for CRS, and a synergistic effect can be expected when loaded with CRS treatment drugs.

Molecular imprinting-based triple-emission ratiometric fluorescence sensor with aggregation-induced emission effect for visual detection of doxycycline.

The development of high-performance sensors for doxycycline (DOX) detection is necessary because its residue accumulation will cause serious harm to human health and the environment. Here, a novel tri-emission ratiometric fluorescence sensor was proposed by using "post-mixing" strategy of different emissions fluorescence molecularly imprinted polymers with salicylamide as dummy template (DMIPs). BSA was chosen as assistant functional monomer, and also acted as sensitizers for the aggregation-induced emission (AIE) effect of DOX. The blue-emitting carbon dots and the red-emitting CdTe quantum dots were separately introduced into DMIPs as the response signals. Upon DOX recognition within 2 min, blue and red fluorescence of the tri-emission DMIPs sensor were quenched while green fluorescence of DOX was enhanced, resulting in a wide range of color variations observed over bluish violet-rosered-light pink-orange-yellow-green with a detection limit of 0.061 µM. The sensor possessed highly selective recognition and was successfully applied to detect DOX in complicated real samples. Moreover, with the fluorescent color collection and data processing, the smartphone-assisted visual detection of the sensors showed satisfied sensitivity with low detection limit. This work provides great potential applications for rapid and visual detection of antibiotics in complex substrates.

Epsilon-poly-l-lysine microneedle patch loaded with amorphous doxycycline nanoparticles for synergistic treatment of skin infection.

The development of antibiotic-loaded microneedles has been hindered for years by limited excipient options, restricted drug-loading space, poor microneedle formability, and short-term drug retention. Therefore, this study proposes a dissolving microneedle fabricated from the host-defense peptide ε-poly-l-lysine (EPL) as an antibacterial adjuvant system for delivering antibiotics. EPL serves not only as a major matrix material for the microneedle tips, but also as a broad-spectrum antibacterial agent that facilitates the intracellular accumulation of the antibiotic doxycycline (DOX) by increasing bacterial cell membrane permeability. Furthermore, the formation of physically crosslinked networks of EPL affords microneedle tips with improved formability, good mechanical properties, and amorphous nanoparticles (approximately 7.2 nm) of encapsulated DOX. As a result, a high total loading content of both antimicrobials up to 2319.1 µg/patch is achieved for efficient transdermal drug delivery. In a Pseudomonas aeruginosa-induced deep cutaneous infection model, the EPL microneedles demonstrates potent and long-term effects by synergistically enhancing antibiotic activities and prolonging drug retention in infected lesions, resulting in remarkable therapeutic efficacy with 99.91 % (3.04 log) reduction in skin bacterial burden after a single administration. Overall, our study highlights the distinct advantages of EPL microneedles and their potential in clinical antibacterial practice when loaded with amorphous DOX nanoparticles.

C9-Functionalized Doxycycline Analogs as Drug Candidates to Prevent Pathological α-Synuclein Aggregation and Neuroinflammation in Parkinson's Disease Degeneration.

Doxycycline, a semi-synthetic tetracycline, is a widely used antibiotic for treating mild-to-moderate infections, including skin problems. However, its anti-inflammatory and antioxidant properties, combined with its ability to interfere with α-synuclein aggregation, make it an attractive candidate for repositioning in Parkinson's disease. Nevertheless, the antibiotic activity of doxycycline restricts its potential use for long-term treatment of Parkinsonian patients. In the search for non-antibiotic tetracyclines that could operate against Parkinson's disease pathomechanisms, eighteen novel doxycycline derivatives were designed. Specifically, the dimethyl-amino group at C4 was reduced, resulting in limited antimicrobial activity, and several coupling reactions were performed at position C9 of the aromatic D ring, this position being one of the most reactive for introducing substituents. Using the Thioflavin-T assay, we found seven compounds were more effective than doxycycline in inhibiting α-synuclein aggregation. Furthermore, two of these derivatives exhibited better anti-inflammatory effects than doxycycline in a culture system of microglial cells used to model Parkinson's disease neuroinflammatory processes. Overall, through structure-activity relationship studies, we identified two newly designed tetracyclines as promising drug candidates for Parkinson's disease treatment.

Preliminary insights on the development of a continuous-flow solar system for the photocatalytic degradation of contaminants of emerging concern in water.

The ubiquity and impact of pharmaceuticals and pesticides, as well as their residues in environmental compartments, particularly in water, have raised human and environmental health concerns. This emphasizes the need of developing sustainable methods for their removal. Solar-driven photocatalytic degradation has emerged as a promising approach for the chemical decontamination of water, sparking intensive scientific research in this field. Advancements in photocatalytic materials have driven the need for solar reactors that efficiently integrate photocatalysts for real-world water treatment. This study reports preliminary results from the development and evaluation of a solar system for TiO2-based photocatalytic degradation of intermittently flowing water contaminated with doxycycline (DXC), sulfamethoxazole (SMX), dexamethasone (DXM), and carbendazim (CBZ). The system consisted of a Fresnel-type UV solar concentrator that focused on the opening and focal point of a parabolic trough concentrator, within which tubular quartz glass reactors were fixed. Concentric springs coated with TiO2, arranged one inside the other, were fixed inside the quartz reactors. The reactors are connected to a raw water tank at the inlet and a check valve at the outlet. Rotating wheels at the collector base enable solar tracking in two axes. The substances (SMX, DXC, and CBZ) were dissolved in dechlorinated tap water at a concentration of 1.0 mg/L, except DXM (0.8 mg/L). The water underwent sequential batch (~ 3 L each, without recirculation) processing with retention times of 15, 30, 60, 90, and 120 min. After 15 min, the degradation rates were as follows: DXC 87%, SMX 35.5%, DXM 32%, and CBZ 31.8%. The system processed 101 L of water daily, simultaneously removing 870, 355, 256, and 318 µg/L of DXC, SMX, DXM, and CBZ, respectively, showcasing its potential for real-world chemical water decontamination application. Further enhancements that enable continuous-flow operation and integrate highly effective adsorbents and photocatalytic materials can significantly enhance system performance.

ROS-Responsive Poly(α-l-lysine)-Based Nanoparticles Loaded with Doxycycline Combat Oxidative Stress and Bacterial Infection.

Bacterial pneumonia is one of the major threats in clinical practice, and the reactive oxygen species (ROS) generated at the infection site can exacerbate the damage. Currently, conventional antibiotic therapies have low utilization, and their excessive use can result in substantial toxicity. Nanocarrier systems provide an ideal approach for treating bacterial infection by facilitating more efficient utilization of antibiotics. In this study, the ROS-responsive amphiphilic nanoparticles (NPs) are developed and used to encapsulate the antibiotic doxycycline (DOXY) to achieve antibacterial and antioxidant functionalities. The NPs are prepared from poly(α-l-lysine) (α-PLL) and phenylboronic acid pinacol ester simultaneously conjugated carbonyldiimidazole (abbreviated as CDIPB). The phenylboronic acid ester groups on CDIPB could react with excessive ROS to suppress oxidative damage at the infection site. The ROS-responsive degradation of CDIPB also facilitates the rapid release of internal DOXY, effectively killing the accumulated bacteria. Additionally, in vitro cell experiments demonstrate the good biocompatibility of the NPs. These results suggest that the ROS-responsive amphiphilic nanoparticles can serve as a novel nanoplatform for the treatment of bacterial pneumonia.

Development of a PVA/PCL/CS-Based Nanofibrous Membrane for Guided Tissue Regeneration and Controlled Delivery of Doxycycline Hydrochloride in Management of Periodontitis: In Vivo Evaluation in Rats.

Antibiotic administration is an adjacent therapy to guided tissue regeneration (GTR) in the management of periodontitis. This is due to the major role of pathogen biofilm in aggravating periodontal defects. This study aimed to fabricate a GTR membrane for sustained delivery of doxycycline hydrochloride (DOX) while having a space-maintaining function. The membranes were prepared using a polymeric blend of polycaprolactone/polyvinyl alcohol/chitosan by the electrospinning technique. The obtained membranes were characterized in terms of physicochemical and biological properties. Nanofibers showed a mean diameter in the submicron range of < 450 nm while having uniform randomly aligned morphology. The obtained membranes showed high strength and flexibility. A prolonged in vitro release profile during 68 h was observed for manufactured formulations. The prepared membranes showed a cell viability of > 70% at different DOX concentrations. The formulations possessed antimicrobial efficacy against common pathogens responsible for periodontitis. In vivo evaluation also showed prolonged release of DOX for 14 days. The histopathological evaluation confirmed the biocompatibility of the GTR membrane. In conclusion, the developed nanofibrous DOX-loaded GTR membranes may have beneficial characteristics in favour of both sustained antibiotic delivery and periodontal regeneration by space-maintaining function without causing any irritation and tissue damage.

Techno-economic assessment of doxycycline recovery using rice straw biochar: A circular economic execution.

The non-scientific disposal of antibiotics has resulted in massive contamination of the bioactive molecules in the aquatic ecosystem. The presence of antibiotics in the effluents limits the biodegradation of micropollutants by affecting the micro-ecological balance. Hence this study aims to remove doxycycline antibiotics from wastewater using biochar. Elemental analysis of the biochar revealed C, Si and N as most abundant content while BET analysis confirmed the mesoporous nature of the adsorbent. The XRD and Raman spectra confirmed amorphic sp2 carbon dominant structure in the biochar. The adsorption mechanism was predicted, correlating the charge distribution and FTIR analysis. The effects of different process parameters were studied using CCD, ANOVA, and RSM. Moreover, the different kinetic models revealed that the pseudo-second-order kinetics model was the best fit and film layer diffusion was the dominant contributor. The isotherm study indicated the high adsorption capacity of the biochar and its non-ionic nature. Thermodynamics study established the spontaneity and exothermic nature. The results suggested no significant change in antibiotic removal efficiency across different system (pond water (97.13%), river water (98.11%), seawater (96.84%), tap water (99.13%), and distilled water (99.74%)). For the desorption of the antibiotic from the biochar surface, 90% ethanol was the most efficient (98.9%), and upon recrystallization by solvent evaporation, 98.7% of the antibiotic of the initial load was recovered. Hence, the implementation of this described process would enable resource recovery along with water treatment, which is not possible with existing approaches. The cost analysis of the whole process revealed that biochar preparation was the bulk expense and the process would be self-sustainable even if the price of the recovered antibiotic would be set at less than half ($41/kg) of the current market price ($94/kg) of the API. Thus, the process endorses a successful circular economy approach toward societal and economic sustainability.

Dual-Responsive Alginate Hydrogel Constructed by Sulfhdryl Dendrimer as an Intelligent System for Drug Delivery.

Intelligent stimulus-triggered release and high drug-loading capacity are crucial requirements for drug delivery systems in cancer treatment. Based on the excessive intracellular GSH expression and pH conditions in tumor cells, a novel glutathione (GSH) and pH dual-responsive hydrogel was designed and synthesized by conjugates of glutamic acid-cysteine dendrimer with alginate (Glu-Cys-SA) through click reaction, and then cross-linked with polyethylene glycol (PEG) through hydrogen bonds to form a 3D-net structure. The hydrogel, self-assembled by the inner disulfide bonds of the dendrimer, is designed to respond to the GSH heterogeneity in tumors, with a remarkably high drug loading capacity. The Dox-loaded Glu-Cys-SA hydrogel showed controlled drug release behavior, significantly with a release rate of over 76% in response to GSH. The cytotoxicity investigation indicated that the prepared DOX-loaded hydrogel exhibited comparable anti-tumor activity against HepG-2 cells with positive control. These biocompatible hydrogels are expected to be well-designed GSH and pH dual-sensitive conjugates or polymers for efficient anticancer drug delivery.

Diastereomer recognition of three pairs of tetracyclines by electrospray ionization mass spectrometry.

RATIONALE: Stereoisomer profiling is always a difficult issue. Based on the difference between diastereomers, usually because of steric hindrance, isomers can be differentiated by mass spectrometry (MS), although it is often not an easy task. In the current study, tetracycline, chlortetracycline and doxycycline could be distinguished from their respective 4-epimers by MS. METHODS: The electrospray ionization tandem mass spectrometry (ESI-MSn ) analyses were carried out on a Bruker 3000plus ion trap mass spectrometer. For MS/MS experiments, the collision energy was set between 0.18 and 0.45 V to perform energy-resolved mass spectrometry (ERMS). Test solutions were prepared in methanol/water (90:10, v/v) at a concentration of 10 µg/mL. RESULTS: Compared with the collision-induced dissociation (CID) spectrum of protonated tetracycline, the most abundant peak changed from m/z 427 to m/z 410 for 4-epitetracycline. For chlortetracycline and its 4-epimer, differences in relative abundance were observed too. In the CID spectrum of a fragment ion of doxycycline, the abundance of m/z 154 was relatively higher than for the 4-epimer, showing the same trend as in the CID spectra of the other two pairs of tetracyclines. CONCLUSIONS: The CID spectra of tetracycline and chlortetracycline were different from those of their 4-epimers. The CID spectra of protonated doxycycline and its 4-epimer showed only a subtle difference, but the m/z 154 fragment ion in the CID spectra of the fragment ion at m/z 428 offers the possibility to differentiate both epimers.

Biological Profile of Two Gentiana lutea L. Metabolites Using Computational Approaches and In Vitro Tests.

Natural products have been the main source of bioactive molecules for centuries. We tested the biological profile of two metabolites extracted from Gentiana lutea L. by means of computational techniques and in vitro assays. The two molecules (loganic acid and gentiopicroside) were tested in silico using an innovative technique, named Inverse Virtual Screening (IVS), to highlight putative partners among a panel of proteins involved in inflammation and cancer events. A positive binding with cyclooxygenase-2 (COX-2), alpha-1-antichymotrypsin, and alpha-1-acid glycoprotein emerged from the computational experiments and the outcomes from the promising interaction with COX-2 were confirmed by Western blot, highlighting the reliability of IVS in the field of the natural products.

The Chemically-Modified Tetracycline COL-3 and Its Parent Compound Doxycycline Prevent Microglial Inflammatory Responses by Reducing Glucose-Mediated Oxidative Stress.

We used mouse microglial cells in culture activated by lipopolysaccharide (LPS) or α-synuclein amyloid aggregates (αSa) to study the anti-inflammatory effects of COL-3, a tetracycline derivative without antimicrobial activity. Under LPS or αSa stimulation, COL-3 (10, 20 µM) efficiently repressed the induction of the microglial activation marker protein Iba-1 and the stimulated-release of the pro-inflammatory cytokine TNF-α. COL-3's inhibitory effects on TNF-α were reproduced by the tetracycline antibiotic doxycycline (DOX; 50 µM), the glucocorticoid dexamethasone, and apocynin (APO), an inhibitor of the superoxide-producing enzyme NADPH oxidase. This last observation suggested that COL-3 and DOX might also operate themselves by restraining oxidative stress-mediated signaling events. Quantitative measurement of intracellular reactive oxygen species (ROS) levels revealed that COL-3 and DOX were indeed as effective as APO in reducing oxidative stress and TNF-α release in activated microglia. ROS inhibition with COL-3 or DOX occurred together with a reduction of microglial glucose accumulation and NADPH synthesis. This suggested that COL-3 and DOX might reduce microglial oxidative burst activity by limiting the glucose-dependent synthesis of NADPH, the requisite substrate for NADPH oxidase. Coherent with this possibility, the glycolysis inhibitor 2-deoxy-D-glucose reproduced the immunosuppressive action of COL-3 and DOX in activated microglia. Overall, we propose that COL-3 and its parent compound DOX exert anti-inflammatory effects in microglial cells by inhibiting glucose-dependent ROS production. These effects might be strengthened by the intrinsic antioxidant properties of DOX and COL-3 in a self-reinforcing manner.

Doxycycline Interferes with Zika Virus Serine Protease and Inhibits Virus Replication in Human Skin Fibroblasts.

Zika virus (ZIKV) represents a re-emerging threat to global health due to its association with congenital birth defects. ZIKV NS2B-NS3 protease is crucial for virus replication by cleaving viral polyprotein at various junctions to release viral proteins and cause cytotoxic effects in ZIKV-infected cells. This study characterized the inhibitory effects of doxycycline against ZIKV NS2B-NS3 protease and viral replication in human skin cells. The in silico data showed that doxycycline binds to the active site of ZIKV protease at a low docking energy (-7.8 Kcal/mol) via four hydrogen bonds with the protease residues TYR1130, SER1135, GLY1151, and ASP83. Doxycycline efficiently inhibited viral NS2B-NS3 protease at average human temperature (37 °C) and human temperature with a high fever during virus infection (40 °C). Interestingly, doxycycline showed a higher inhibitory effect at 40 °C (IC50 = 5.3 µM) compared to 37 °C (9.9 µM). The virus replication was considerably reduced by increasing the concentration of doxycycline. An approximately 50% reduction in virus replication was observed at 20 µM of doxycycline. Treatment with 20 µM of doxycycline reduced the cytopathic effects (CPE), and the 40 µM of doxycycline almost eliminated the CPE of human skin cells. This study showed that doxycycline binds to the ZIKV protease and inhibits its catalytic activity at a low micro-molecular concentration range. Treatment of human skin fibroblast with doxycycline eliminated ZIKV infection and protected the cells against the cytopathic effects of the infection.

A ratiometric fluorescent probe based on sulfur quantum dots and calcium ion for sensitive and visual detection of doxycycline in food.

The residue of doxycycline in food can cause harm to human. Therefore, the detection of doxycycline residue is necessary. Herein, a ratiometric fluorescent probe was designed based on sulfur quantum dots (S dots) and Ca2+. Due to static quenching and inter filter effect between doxycycline and S dots, doxycycline quenched fluorescence of S dots at 450 nm. Meanwhile, doxycycline and Ca2+ formed fluorescent complex through coordination to produce new peak at 520 nm. The ratio of fluorescence intensity (F520/F450) and doxycycline concentration showed good linear relationship with detection limit of 0.19 µM. The fluorescence color of S dots/Ca2+ changed from blue to light green with increasing doxycycline concentration, which was applied for visual semi-quantitative detection of doxycycline. Moreover, the method was used for detecting doxycycline in milk and fish samples with recoveries in the range of 91%-110%. The method showed good application potential in detection of doxycycline in food samples.

Biomaterial-Based Nanocomposite for Osteogenic Repurposing of Doxycycline.

BACKGROUND: Besides its antimicrobial action, doxycycline (DX) has lately been repurposed as a small-molecule drug for osteogenic purposes. However, osteogenic DX application is impeded by its dose-dependent cytotoxicity. Further, high-dose DX impairs cell differentiation and mineralization. PURPOSE: Integrating DX into a biomaterial-based delivery system that can control its release would not only ameliorate its cytotoxic actions but also augment its osteogenic activity. In this work, we managed to engineer novel composite DX-hydroxyapatite-polycaprolactone nanoparticles (DX/HAp/PCL) to modify DX osteogenic potential. METHODS: Employing a 23-factorial design, we first optimized HApN for surface-area attributes to maximize DX loading. Composite DX/HAp/PCL were then realized using a simple emulsification technique, characterized using various in vitro methods, and evaluated for in vitro osteogenesis. RESULTS: The developed HApN exhibited a favorable crystalline structure, Ca:P elemental ratio (1.67), mesoporous nature, and large surface area. DX/HAp/PCL achieved the highest reported entrapment efficiency (94.77%±1.23%) of DX in PCL-based particles. The developed composite system achieved controlled release of the water-soluble DX over 24 days. Moreover, the novel composite nanosystem managed to significantly ameliorate DX cytotoxicity on bone-marrow stem cells, as well as enhance its overall proliferation potential. Alkaline phosphatase and mineralization assays revealed superior osteodifferentiation potential of the composite system. Quantification of gene expression demonstrated that while DX solution was able to drive bone-marrow stem cells down the osteogenic lineage into immature osteoblasts after 10-day culture, the innovative composite system allowed maturation of osteodifferentiated cells. To the best of our knowledge, this is the first work to elaborate the impact of DX on the expression of osteogenic genes: RUNX2, OSP, and BSP. Further, the osteogenicity of a DX-loaded particulate-delivery system has not been previously investigated. CONCLUSION: Our findings indicate that repurposing low-dose DX in complementary biomaterial-based nanosystems can offer a prominent osteogenic candidate for bone-regeneration purposes.

Tailored Doxycycline Hyclate Loaded In Situ Gel for the Treatment of Periodontitis: Optimization, In Vitro Characterization, and Antimicrobial Studies.

Currently, periodontitis is treated by oral dosage forms (antibiotics) which shows systemic side effects and failed to reach the therapeutic concentration (above minimum inhibitory concentration, MIC) in the periodontal pocket. The present study aimed to overcome the above issues, by designing tailored doxycycline hyclate laden in situ gel by Poloxamer 407, chitosan, and polyethylene glycol 600. The in situ gel-forming system has attracted attention owing to its ability of sustained drug release above MIC, easy administration (syringeability), and high drug retention (localization) in the periodontal cavity. The Box-Behnken design (BBD) was used to tailor and optimize the concentration of Poloxamer 407 (X1 = 14.3%), chitosan (X2 = 0.58%), and polyethylene glycol 600 (X3 = 1.14%) to achieve sufficient syringeability (149 N), t90% (1105 min), and viscosity at non-physiological condition (512 cps) and physiological condition (5415 cps). The optimized in situ gel was clear and isotonic (RBCs test). The gelation temperature of the optimized in situ was 34 ± 1°C with sufficient mucoadhesive strength (26 ± 2 dyn/cm2), gel strength (29 ± 2 sec), and texture profile for periodontal application. The in vitro drug release studies showed sustain release from optimized in situ gel (24h) in comparison to marketed gel (7h). The antimicrobial activity (cup plate technique) of the in situ gel was equivalent to the marketed doxycycline gel, which suggests that the doxycycline hyclate retained its antimicrobial efficacy when formulated as in situ gelling system. In conclusion, BBD was effectively utilized to optimize in situ gel with minimum level of polymers to achieve the required characteristics of the in situ gel for sustaining drug delivery to treat periodontitis.

Searching for the Best Transthyretin Aggregation Protocol to Study Amyloid Fibril Disruption.

Several degenerative amyloid diseases, with no fully effective treatment, affect millions of people worldwide. These pathologies-amyloidoses-are known to be associated with the formation of ordered protein aggregates and highly stable and insoluble amyloid fibrils, which are deposited in multiple tissues and organs. The disruption of preformed amyloid aggregates and fibrils is one possible therapeutic strategy against amyloidosis; however, only a few compounds have been identified as possible fibril disruptors in vivo to date. To properly identify chemical compounds as potential fibril disruptors, a reliable, fast, and economic screening protocol must be developed. For this purpose, three amyloid fibril formation protocols using transthyretin (TTR), a plasma protein involved in several amyloidoses, were studied using thioflavin-T fluorescence assays, circular dichroism (CD), turbidity, dynamic light scattering (DLS), and transmission electron microscopy (TEM), in order to characterize and select the most appropriate fibril formation protocol. Saturation transfer difference nuclear magnetic resonance spectroscopy (STD NMR) was successfully used to study the interaction of doxycycline, a known amyloid fibril disruptor, with preformed wild-type TTR (TTRwt) aggregates and fibrils. DLS and TEM were also used to characterize the effect of doxycycline on TTRwt amyloid species disaggregation. A comparison of the TTR amyloid morphology formed in different experimental conditions is also presented.

Interaction of Carboxyalkylated Cellulose Nanocrystals and Antibiotics.

Although antibiotics are beneficial for treating infections, their release into the environment has raised global concerns. In this work, the interactions of cellulose nanocrystal (CNC) derivatives with sulfamethoxazole (SMX), ciprofloxacin (CIP), and doxycycline (DOX) antibiotics were studied fundamentally. CNC was carboxyalkylated to bear different carbon chain lengths but similar negative charges on its surface. The highest level of adsorption of DOX on the carboxypantadecanated CNC (i.e., carboxyalkylated CNC with more carbon spacer, PCNC) occurred at pH 6.0, which was due to the electrostatic and π interactions along with hydrogen bonding. The contact angle and quartz crystal microbalance (QCM) adsorption analyses revealed a faster interaction and adsorption of DOX than other antibiotics on PCNC. The results also depicted the diffusion of DOX into the porous structure of CNC derivatives, especially that of PCNC. Also, a more compact adsorbed layer of DOX was formed on PCNC than on other CNC derivatives. Carboxyalkylation was observed to slightly reduce the surface area of CNC, while the antibiotic adsorption drastically increased the surface area of CNC due to their adsorption on the surface. XPS analysis revealed that carboxyalkylation significantly enhanced the C-C/C-H bond, while antibiotic adsorption on PCNC enhanced C-N/C-O and C-C/C-H bonds in antibiotic-loaded CNC samples. Overall, carboxyalkylated CNC was observed to have an outstanding affinity for capturing antibiotics, especially DOX, which could pave the way for the use of CNC in such applications that surface/antibiotic interactions were essential.