RESUMO
Electronic devices with multifunctional capabilities is forever an attractive area with diverse scope including towards developing solutions to sustainable energy technology. Microbial biofuel cells (MiBFCs) are one such sustainable energy technology based electronic device which can not only harvest energy, but can perform biosensing leading to bioremediation. However, low energy yield, costly fabrication procedures and bulky devices are some of the limitations of such MiBFCs. In this work, for the first time a simple vacuum filtration fabrication technique is used for making thin and conductive electrodes with homogeneous CNT solution for MiBFC application. The fully paper-based MiBFC is integrated into a compact micro device with 3D printed components which adds novelty to the work. The MiBFC is capable of maintaining a stable open circuit voltage of 410 mV for more than 1 h and can deliver a maximum power density of 192 µW/cm2 which is reasonably high for such paper-based MiBFCs operating with micro-volume of substrate. This device will help in developing more freestanding power sources for instant diagnostics and data transfer.
Assuntos
Fontes de Energia Bioelétrica , Técnicas Biossensoriais , Energia Renovável , Técnicas Biossensoriais/métodos , Eletrodos , Filtração/instrumentação , Filtração/métodos , Impressão Tridimensional/tendências , Energia Renovável/normas , VácuoRESUMO
The "Materials Chemistry" Section of Molecules is an open access place for the dissemination of theoretical and experimental studies related to the chemical approaches to materials-based problems [...].
Assuntos
Materiais Biocompatíveis/química , Hidrogéis/química , Ciência dos Materiais/normas , Nanopartículas/química , Energia Renovável/normas , Humanos , Hidrogéis/uso terapêutico , Nanopartículas/uso terapêuticoRESUMO
To mitigate the problems associated with climate change, the low-carbon economy concept is now being championed around the world in an effort to reduce greenhouse gas emissions and ensure sustainable economic growth. Therefore, to reduce the dependence on traditional energy sources, the Organization for Economic Co-operation and Development (OECD) has been actively promoting the use of renewable energy. Past research has tended to neglect the influence of other pollutants such as fine particulate matter (PM2.5) and sulfur dioxide (SO2) and have mainly been based on static analyses. To make up for these research gaps, this study examined OECD country data from 2010â»2014, with labor, fixed assets, new energy, and traditional energy as the inputs, and Gross Domestic Product (GDP), carbon dioxide (CO2), and PM2.5 as the outputs, from which it was found: (1) the overall efficiency of the individual countries varied significantly, with nine countries being found to have efficiencies of 1 for all five years, but many others having efficiencies below 0.2; (2) in countries where there was a need for improvements in traditional energy (which here refers to coal, petroleum and other fossil energy sources), there was also a significant need for improvement in new energy sources (which here refers to clean energy which will produce pollutant emissions and can be directly used for production and life, including resources like nuclear energy and "renewable energy"); (3) countries with poor traditional energy and new energy efficiencies also had poor CO2 and PM2.5 efficiencies; (4) many OECD countries have made progress towards sustainable new energy developments.
Assuntos
Fontes Geradoras de Energia/estatística & dados numéricos , Fontes Geradoras de Energia/normas , Guias como Assunto , Invenções/estatística & dados numéricos , Organização para a Cooperação e Desenvolvimento Econômico , Energia Renovável/estatística & dados numéricos , Energia Renovável/normasRESUMO
The new European model stipulates the achievement of an inclusive, sustainable and intelligent economic growth. Increasing the share of renewable energy is one of the factors that improve the quality of economic growth, similar to research, development and investment in human capital. In this paper we tested the correlation between economic growth and renewable energy consumption for ten European Union (EU) member states from Central and Eastern Europe (CEE) in the period 1990-2014, using Auto-regressive and Distributed Lag (ARDL) modeling procedure, a technique that captures causal relationships both on a short run and on a long run. The short run perspective reveals the transition towards a new energy paradigm, while the long run approach corresponds to the long-term equilibrium of the analyzed factors. Our results shows that, in the short run, the Gross Domestic Product (GDP) and Renewable Energy Consumption (REC) dynamics are independent in Romania and Bulgaria, while in Hungary, Lithuania and Slovenia an increasing renewable energy consumption improves the economic growth. The hypothesis of bi-directional causality between renewable energy consumption and economic growth is validated in the long run for both the whole group of analyzed countries as well as in the case of seven CEE states which were studied individually. These results allow us to look into the feasibility of the Europe 2020 goals regarding the increase of energy efficiency and to propose public policies to achieve these goals.
Assuntos
Desenvolvimento Econômico/tendências , Produto Interno Bruto , Energia Renovável/normas , Dióxido de Carbono/química , Dióxido de Carbono/toxicidade , Europa Oriental , Humanos , Investimentos em SaúdeRESUMO
Wave energy devices are novel structures in the marine environment and, as such, provide a unique habitat for biofouling organisms. In this study, destructive scrape samples and photoquadrats were used to characterise the temperate epibenthic community present on prototypes of the Pelamis wave energy converter. The biofouling observed was extensive and diverse with 115 taxa recorded including four non-native species. Vertical zonation was identified on the sides of the device, with an algae-dominated shallow subtidal area and a deeper area characterised by a high proportion of suspension-feeding invertebrates. Differences in species composition and biomass were also observed between devices, along the length of the device and between sampling dates. This research provides an insight into the variation of biofouling assemblages on a wave energy device as well as the potential technical and ecological implications associated with biofouling on marine renewable energy structures.
Assuntos
Organismos Aquáticos/crescimento & desenvolvimento , Incrustação Biológica/prevenção & controle , Fontes de Energia Elétrica/microbiologia , Invertebrados/crescimento & desenvolvimento , Energia Renovável , Animais , Organismos Aquáticos/classificação , Biomassa , Ecossistema , Fontes de Energia Elétrica/normas , Invertebrados/classificação , Biologia Marinha , Energia Renovável/normas , Reino UnidoRESUMO
The process of anaerobic digestion (AD) is valued as a carbon-neutral energy source, while simultaneously treating organic waste, making it safer for disposal or use as a fertilizer on agricultural land. The AD process in many European nations, such as Germany, has grown from use of small, localized digesters to the operation of large-scale treatment facilities, which contribute significantly to national renewable energy quotas. However, these large AD plants are costly to run and demand intensive farming of energy crops for feedstock. Current policy in Germany has transitioned to support funding for smaller digesters, while also limiting the use of energy crops. AD within Ireland, as a new technology, is affected by ambiguous governmental policies concerning waste and energy. A clear governmental strategy supporting on-site AD processing of agricultural waste will significantly reduce Ireland's carbon footprint, improve the safety and bioavailability of agricultural waste, and provide an indigenous renewable energy source. © 2016 Society of Chemical Industry.
Assuntos
Fontes de Energia Bioelétrica , Bactérias Anaeróbias Gram-Negativas/metabolismo , Bactérias Gram-Positivas/metabolismo , Resíduos Industriais , Política Pública , Energia Renovável , Fontes de Energia Bioelétrica/efeitos adversos , Fontes de Energia Bioelétrica/história , Fontes de Energia Bioelétrica/microbiologia , Fontes de Energia Bioelétrica/normas , Pegada de Carbono/economia , Pegada de Carbono/legislação & jurisprudência , Pegada de Carbono/normas , Conservação dos Recursos Naturais/economia , Conservação dos Recursos Naturais/história , Conservação dos Recursos Naturais/legislação & jurisprudência , Produção Agrícola/economia , Produtos Agrícolas/economia , Produtos Agrícolas/crescimento & desenvolvimento , Fermentação , Alemanha , Bactérias Anaeróbias Gram-Negativas/crescimento & desenvolvimento , Bactérias Gram-Positivas/crescimento & desenvolvimento , Fidelidade a Diretrizes/tendências , História do Século XX , História do Século XXI , Humanos , Resíduos Industriais/economia , Irlanda , Política Pública/economia , Política Pública/história , Política Pública/tendências , Energia Renovável/efeitos adversos , Energia Renovável/economia , Energia Renovável/história , Energia Renovável/normas , Gestão da Segurança/economia , Gestão da Segurança/história , Gestão da Segurança/legislação & jurisprudência , Gestão da Segurança/normasRESUMO
This paper introduces an optimal sizing algorithm for a hybrid renewable energy system using smart grid load management application based on the available generation. This algorithm aims to maximize the system energy production and meet the load demand with minimum cost and highest reliability. This system is formed by photovoltaic array, wind turbines, storage batteries, and diesel generator as a backup source of energy. Demand profile shaping as one of the smart grid applications is introduced in this paper using load shifting-based load priority. Particle swarm optimization is used in this algorithm to determine the optimum size of the system components. The results obtained from this algorithm are compared with those from the iterative optimization technique to assess the adequacy of the proposed algorithm. The study in this paper is performed in some of the remote areas in Saudi Arabia and can be expanded to any similar regions around the world. Numerous valuable results are extracted from this study that could help researchers and decision makers.
Assuntos
Algoritmos , Fontes de Energia Elétrica/normas , Modelos Teóricos , Energia Renovável/normas , Simulação por Computador , Conservação de Recursos Energéticos , Reprodutibilidade dos Testes , Arábia SauditaRESUMO
Green retrofits, which improve the environment and energy efficiency of buildings, are considered a potential solution for reducing energy consumption as well as improving human health and productivity. They represent some of the riskiest, most complex, and most uncertain projects to manage. As the foundation of project management, critical success factors (CSFs) have been emphasized by previous research. However, most studies identified and prioritized CSFs independently of stakeholders. This differs from the reality, where the success of green retrofits is tightly interrelated to the stakeholders of projects. To improve the analysis from a stakeholder perspective, the present study proposed an innovative method based on a two-mode social network analysis to integrate CSF analysis with stakeholders. The results of this method can provide further understanding of the interactions between stakeholders and CSFs, and the underlying relationship among CSFs through stakeholders. A pilot study was conducted to apply the proposed method and assess the CSFs for green retrofits in China. The five most significant CSFs are identified in the management of green retrofit. Furthermore, the interrelations between stakeholders and CSFs, coefficient and clusters of CSFs are likewise discussed.
Assuntos
Códigos de Obras/normas , Indústria da Construção/normas , Eficiência , Arquitetura de Instituições de Saúde/normas , Energia Renovável/normas , China , Humanos , Projetos PilotoRESUMO
The narrow scope of the U.S. renewable fuel standard (RFS2) is a missed opportunity to spur a wider range of biomass use. This is especially relevant as RFS2 targets are being missed due to demand-side limitations for ethanol consumption. This paper examines the greenhouse gas (GHG) implications of a more flexible policy based on RFS2, which includes credits for chemical use of bioethanol (to produce bioethylene). A Monte Carlo simulation is employed to estimate the life-cycle GHG emissions of conventional low-density polyethylene (LDPE), made from natural gas derived ethane (mean: 1.8 kg CO2e/kg LDPE). The life-cycle GHG emissions from bioethanol and bio-LDPE are examined for three biomass feedstocks: U.S. corn (mean: 97g CO2e/MJ and 2.6 kg CO2e/kg LDPE), U.S. switchgrass (mean: -18g CO2e/MJ and -2.9 kg CO2e/kg LDPE), and Brazilian sugar cane (mean: 33g CO2e/MJ and -1.3 kg CO2e/kg LDPE); bioproduct and fossil-product emissions are compared. Results suggest that neither corn product (bioethanol or bio-LDPE) can meet regulatory GHG targets, while switchgrass and sugar cane ethanol and bio-LDPE likely do. For U.S. production, bioethanol achieves slightly greater GHG reductions than bio-LDPE. For imported Brazilian products, bio-LDPE achieves greater GHG reductions than bioethanol. An expanded policy that includes bio-LDPE provides added flexibility without compromising GHG targets.
Assuntos
Poluição do Ar/estatística & dados numéricos , Biocombustíveis/normas , Efeito Estufa , Polietileno/síntese química , Energia Renovável/normas , Biocombustíveis/economia , Biocombustíveis/estatística & dados numéricos , Biomassa , Etanol , Método de Monte Carlo , Gás Natural , Panicum , Polietileno/economia , Saccharum , Estados Unidos , Zea maysRESUMO
Linear controllers have been employed in industrial applications for many years, but sometimes they are noneffective on the system with nonlinear characteristics. This paper discusses the structure, performance, implementation cost, advantages, and disadvantages of different linear and nonlinear schemes applied to the pitch control of the wind energy conversion systems (WECSs). The linear controller has the simplest structure and is easily understood by the engineers and thus is widely accepted by the industry. In contrast, nonlinear schemes are more complicated, but they can provide better performance. Although nonlinear algorithms can be implemented in a powerful digital processor nowadays, they need time to be accepted by the industry and their reliability needs to be verified in the commercial products. More information about the system nonlinear feature is helpful to simplify the controller design. However, nonlinear schemes independent of the system model are more robust to the uncertainties or deviations of the system parameters.
Assuntos
Desenho de Equipamento/métodos , Modelos Lineares , Dinâmica não Linear , Vento , Desenho de Equipamento/normas , Energia Renovável/normasRESUMO
Because offshore wind turbines are high-rise structures, they transfer large horizontal loads and moments to their foundations. One of the keys to designing a foundation is determining the sensitivities and laws affecting its load-bearing capacity. In this study, this procedure was carried out for a new high-rise cap pile group foundation adapted to the loading characteristics of offshore wind turbines. The sensitivities of influential factors affecting the bearing properties were determined using an orthogonal test. Through a combination of numerical simulations and model tests, the effects of the inclination angle, length, diameter, and number of side piles on the vertical bearing capacity, horizontal bearing capacity, and bending bearing capacity were determined. The results indicate that an increase in the inclination angle of the side piles will increase the vertical bearing capacity, horizontal bearing capacity, and bending bearing capacity. An increase in the length of the side piles will increase the vertical bearing capacity and bending bearing capacity. When the length of the side piles is close to the central pile, the increase is more apparent. Finally, increasing the number of piles will increase the horizontal bearing capacity; however, the growth rate is small because of the pile group effect.
Assuntos
Materiais de Construção/normas , Desenho de Equipamento/normas , Suporte de Carga , Vento , Desenho de Equipamento/métodos , Energia Renovável/normasAssuntos
Conservação de Recursos Energéticos/métodos , Arquitetura de Instituições de Saúde/normas , Sistemas Multi-Institucionais/organização & administração , Energia Renovável/normas , Conservação de Recursos Energéticos/economia , Redução de Custos/estatística & dados numéricos , Arquitetura de Instituições de Saúde/economia , Humanos , Sistemas Multi-Institucionais/economia , Sistemas Multi-Institucionais/normas , Energia Renovável/economia , WisconsinRESUMO
The rapid growth of the mobile telecommunication sectors of many emerging countries creates a number of problems such as network congestion and poor service delivery for network operators. This results primarily from the lack of a reliable and cost-effective power solution within such regions. This study presents a comprehensive review of the underlying principles of the renewable energy technology (RET) with the objective of ensuring a reliable and cost-effective energy solution for a sustainable development in the emerging world. The grid-connected hybrid renewable energy system incorporating a power conversion and battery storage unit has been proposed based on the availability, dynamism, and technoeconomic viability of energy resources within the region. The proposed system's performance validation applied a simulation model developed in MATLAB, using a practical load data for different locations with varying climatic conditions in Nigeria. Results indicate that, apart from being environmentally friendly, the increase in the overall energy throughput of about 4 kWh/$ of the proposed system would not only improve the quality of mobile services, by making the operations of GSM base stations more reliable and cost effective, but also better the living standards of the host communities.
Assuntos
Energia Renovável/economia , Telecomunicações/economia , Interpretação Estatística de Dados , Nigéria , Energia Renovável/normas , Estações do Ano , Telecomunicações/estatística & dados numéricos , VentoRESUMO
When wildlife habitat overlaps with industrial development animals may be harmed. Because wildlife and people select resources to maximize biological fitness and economic return, respectively, we estimated risk, the probability of eagles encountering and being affected by turbines, by overlaying models of resource selection for each entity. This conceptual framework can be applied across multiple spatial scales to understand and mitigate impacts of industry on wildlife. We estimated risk to Golden Eagles (Aquila chrysaetos) from wind energy development in 3 topographically distinct regions of the central Appalachian Mountains of Pennsylvania (United States) based on models of resource selection of wind facilities (n = 43) and of northbound migrating eagles (n = 30). Risk to eagles from wind energy was greatest in the Ridge and Valley region; all 24 eagles that passed through that region used the highest risk landscapes at least once during low altitude flight. In contrast, only half of the birds that entered the Allegheny Plateau region used highest risk landscapes and none did in the Allegheny Mountains. Likewise, in the Allegheny Mountains, the majority of wind turbines (56%) were situated in poor eagle habitat; thus, risk to eagles is lower there than in the Ridge and Valley, where only 1% of turbines are in poor eagle habitat. Risk within individual facilities was extremely variable; on average, facilities had 11% (SD 23; range = 0-100%) of turbines in highest risk landscapes and 26% (SD 30; range = 0-85%) of turbines in the lowest risk landscapes. Our results provide a mechanism for relocating high-risk turbines, and they show the feasibility of this novel and highly adaptable framework for managing risk of harm to wildlife from industrial development.
Assuntos
Migração Animal , Conservação dos Recursos Naturais , Águias/fisiologia , Modelos Teóricos , Energia Renovável/normas , Vento , Animais , Geografia , Pennsylvania , Medição de RiscoAssuntos
Conservação dos Recursos Naturais/métodos , Ambiente de Instituições de Saúde/normas , Arquitetura Hospitalar/normas , Energia Renovável/normas , Gerenciamento de Resíduos/normas , Conservação dos Recursos Naturais/economia , Conservação dos Recursos Naturais/tendências , Ambiente de Instituições de Saúde/economia , Ambiente de Instituições de Saúde/tendências , Arquitetura Hospitalar/economia , Arquitetura Hospitalar/tendências , Humanos , Energia Renovável/economia , Energia Renovável/estatística & dados numéricos , Gerenciamento de Resíduos/economia , Gerenciamento de Resíduos/métodosRESUMO
U.S. Renewable Fuel Standard (RFS) is a mandatory policy for promoting the utilization of biofuels in road transpiration sector in order to reduce the country's dependency on foreign oil and greenhouse gas emissions. U.S. Environmental Protection Agency (EPA) defines the proportion of renewable fuels according to RFS annual target, and requests obligated parties such like fossil fuel refiner, blenders and importer in the U.S. to complete Renewable Volume Obligation (RVO) every year. Obligated parties prove they have achieved their RVO through a renewable fuels certification system, which generates Renewable Identification Numbers (RINs) for every gallon of qualified renewable fuels produced or imported into U.S., RINs is a key for tracking renewable fuel consumption, which in turn is a key for implementing the RFS in the U.S., separated RINs can be freely traded in market and obligated parties could fulfill their RVO through buying RINs from other stakeholders. This briefing paper highlights RFS policy implementing mechanism and marketing tracking, mainly describes importance of RINs, and the method for generating and tracking RINs by both government and fuels industry participants.