Biodiesel production from sewage sludge using supported heteropolyacid as heterogeneous acid catalyst.

Phosphotungstic acid (HPW) and silicotungstic acid (HSiW) were tested as homogeneous and as heterogeneous catalysts (after immobilized on different supports as high surface area graphite -HSAG500-, montmorillonite -MMT- and alumina -Al2O3-) for the in situ transesterification of sewage sludge lipids. Both catalysts exhibited similar performance in homogeneous phase, with slightly higher biodiesel yield for HPW. When the different supports were tested with HPW, the maximum yield obtained follow the trend: MMT > HSAG500 > Al2O3, but a greater leaching of the heteropolyacid (HPA) was observed with MMT. Therefore, HSAG500 showed the best results with a good FAMEs profile. The percentage of active phase was optimized from 1 to 40%, reaching the optimum at 10%. A more heterogeneous surface is obtained with larger quantities, also favouring the HPA leaching. The reaction temperature and the use of sonication as pre-treatment were also optimized. The best results were obtained after sonication with HPW-HSAG500 (10%) as catalyst, catalyst/sludge ratio 1:2, MeOH/sludge ratio 33:1, 120 °C and 21 h of reaction time with a maximum biodiesel yield of 31.1 % (FAMEs/lipids). In view of the results obtained HPW supports on HSAG500 offers a novel alternative as heterogeneous acid catalyst for in situ transesterification using sewage sludge as raw material.

Natural variation of TBR confers plant zinc toxicity tolerance through root cell wall pectin methylesterification.

Zinc (Zn) is an essential micronutrient but can be cytotoxic when present in excess. Plants have evolved mechanisms to tolerate Zn toxicity. To identify genetic loci responsible for natural variation of plant tolerance to Zn toxicity, we conduct genome-wide association studies for root growth responses to high Zn and identify 21 significant associated loci. Among these loci, we identify Trichome Birefringence (TBR) allelic variation determining root growth variation in high Zn conditions. Natural alleles of TBR determine TBR transcript and protein levels which affect pectin methylesterification in root cell walls. Together with previously published data showing that pectin methylesterification increase goes along with decreased Zn binding to cell walls in TBR mutants, our findings lead to a model in which TBR allelic variation enables Zn tolerance through modulating root cell wall pectin methylesterification. The role of TBR in Zn tolerance is conserved across dicot and monocot plant species.

Ultrathin silica-tiling on living cells for chemobiotic catalysis.

Harnessing the power of cell biocatalysis for sustainable chemical synthesis requires rational integration of living cells with the modern synthetic catalysts. Here, we develop silica-tiling strategy that constructs a hierarchical, inorganic, protocellular confined nanospace around the individual living cell to accommodate molecularly accessible abiotic catalytic sites. This empowers the living microorganisms for new-to-nature chemical synthesis without compromising the cellular regenerative process. Yeast cell, a widely used biocatalyst, is upgraded via highly controlled self-assembly of 2D-bilayer silica-based catalytic modules on cell surfaces, opening the avenues for diverse chemobiotic reactions. For example, combining [AuPt]-catalyzed NADH regeneration, light-induced [Pd]-catalyzed C-C cross-coupling or lipase-catalyzed esterification reactions-with the natural ketoreductase activity inside yeast cell. The conformal silica bilayer provides protection while allowing proximity to catalytic sites and preserving natural cell viability and proliferation. These living nanobiohybrids offer to bridge cell's natural biocatalytic capabilities with customizable heterogeneous metal catalysis, enabling programmable reaction sequences for sustainable chemical synthesis.

An Attempt to Replace Pure Citric Acid with Natural Lemon Juice during Potato Starch Esterification.

The application of chemical operations in food processing, in which pure chemical compounds are used to modify food ingredients, often raises social concerns. One of the most frequently modified dietary substances is starch, e.g., E1401-E1404, E1412-E1414, E1420, E1422, E1440, E1442, and E1450-E1452. An alternative solution to chemical treatments seems to be the use of raw materials naturally containing substrates applied for starch modification. Heating starch with a lemon juice concentrate can be considered a novel and effective method for producing starch citrate, which is part of the so-called "green chemistry". The modified preparations obtained as a result of potato starch esterification with natural lemon juice had a comparable degree of esterification to that of the esters produced with pure citric acid. In addition, the use of the juice doubled their resistance to amylolytic enzymes compared to the preparations made with pure acid. Replacing citric acid with lemon juice can facilitate the esterification process, and the analyzed properties of both types of modified preparations indicate that starch esters produced with pure citric acid can be successfully replaced by those produced using natural lemon juice, which may increase the social acceptance of these modified preparations.

Preparation of Esterified Starches with Different Amylose Content and Their Blending with Polybutylene Succinate.

Three types of starch with different amylose content were esterified and blended with polybutylene succinate (PBS) to obtain esterified manioc starch/PBS (EMS/PBS), esterified corn starch/PBS (ECS/PBS), and esterified waxy corn starch/PBS (EWS/PBS) composites. The EMS/PBS and ECS/PBS composites with high amylose content displayed typical V-type crystal structures. The original crystals of EWS, which had low amylose content, were disrupted during the esterification process. EWS exhibited the strongest interaction with PBS and the most favorable interface compatibility. The pyrolysis temperature was in order of EMS/PBS < ECS/PBS < EWS/PBS. The elongation at break of the three blends was higher than that of pure PBS. The esterification and plasticization of the EWS/PBS composite were the most comprehensive. The EWS/PBS composite showed the lowest storage modulus (G') and complex viscosity (η*). The interfacial bonding force of the composite materials increased with more amylopectin, decreasing intermolecular forces and destroying crystal structures, which decreased G' and η* and increased toughness. The EWS/PBS composite, with the least amylose content, had the best hydrophobicity and degradation performance.

Highly Dispersive Gold Nanoclusters Confined within Micropores of Defective UiO-66 for Highly Efficient Aldehyde Oxidation at Mild Conditions.

The oxidative esterification of aldehydes under mild conditions remains a significant challenge. This study introduces a unique defective UiO-66 to achieve gold nanoclusters (AuNCs) for efficient aldehyde oxidation under mild conditions. The construction and characterization of these materials are thoroughly investigated by techniques of XRD, SEM and TEM images, FT-IR, Raman, and XPS spectrum, emphasizing the unique microporous in defective UiO-66 are conducive to the fabrication of AuNCs. The catalytic performance of the prepared materials in aldehyde oxidation reactions is systematically evaluated, demonstrating the remarkable efficiency of dispersed Au@UiO-66-25 with high-content (9.09 wt%) Au-loading and ultra-small size (~2.7 nm). Moreover, mechanistic insights into the catalytic process under mild conditions (70 °C for 1 h) are provided, elucidating the determination of defective UiO-66 in the confined fabrication of AuNCs and subsequent furfural adsorption, which underlie the principles governing the observed enhancements. This study establishes the groundwork for the synthesis of highly dispersed and catalytically active metal nanoparticles using defective MOFs as a platform, advancing the catalytic esterification reaction of furfural to the next level.

Fabrication of blueberry anthocyanins-rich gels based on the apricot polysaccharides with different esterification degrees.

To enhance the stability of anthocyanins under conditions such as light, temperature, and pH, an apricot polysaccharide hydrogel for anthocyanins encapsulation was prepared in this study. Apricot polysaccharides with different DEs were prepared by an alkaline de-esterification method. A gel was prepared by mixing the apricot polysaccharides with CaCl2 to encapsulate the anthocyanins; the encapsulation efficiency reached 69.52 ± 0.31 %. Additionally, the gel exhibited favorable hardness (144.17 ± 2.33 g) and chewiness (64.13 ± 1.53 g). Fourier transform infrared (FTIR) and X-ray diffractometer (XRD) spectra confirmed that the formation of the hydrogel primarily relied on electrostatic interactions and hydrogen bonding. Compared with free anthocyanins, it was also found that the gel-encapsulated anthocyanins had a higher retention rate (RR) under different temperatures and light.

Lipases for targeted industrial applications, focusing on the development of biotechnologically significant aspects: A comprehensive review of recent trends in protein engineering.

Lipases are remarkable biocatalysts, adept at catalyzing the breakdown of diverse compounds into glycerol, fatty acids, and mono- and di-glycerides via hydrolysis. Beyond this, they facilitate esterification, transesterification, alcoholysis, acidolysis, and more, making them versatile in industrial applications. In industrial processes, lipases that exhibit high stability are favored as they can withstand harsh conditions. However, most native lipases are unable to endure adverse conditions, making them unsuitable for industrial use. Protein engineering proves to be a potent technology in the development of lipases that can function effectively under challenging conditions and fulfill criteria for various industrial processes. This review concentrated on new trends in protein engineering to enhance the diversity of lipase genes and employed in silico methods for predicting and comprehensively analyzing target mutations in lipases. Additionally, key molecular factors associated with industrial characteristics of lipases, including thermostability, solvent tolerance, catalytic activity, and substrate preference have been elucidated. The present review delved into how industrial traits can be enhanced through directed evolution (epPCR, gene shuffling), rational design (FRESCO, ASR), combined engineering strategies (i.e. CAST, ISM, and FRISM) as protein engineering methodologies in contexts of biodiesel production, food processing, and applications of detergent, pharmaceutics, and plastic degradation.

Preparation of medium- and long-chain triacylglycerols rich in n-3 polyunsaturated fatty acids by bio-imprinted lipase-catalyzed interesterification.

Medium and long-chain triacylglycerol (MLCT) rich in n-3 polyunsaturated fatty acids (PUFAs) were obtained in three-hour interesterification of fish oil with medium-chain triacylglycerol (MCTs), using lipase bio-imprinted with surfactant as a catalyst. Initially, for bio-imprinted lipase preparation, the interesterification reaction conditions were optimized, resulting in a lipase with 1.47 times higher catalytic activity compared to control (non-bio-imprinted). Afterwards, the reaction conditions for MLCT synthesis were optimized, using bio-imprinted lipase as a catalyst. The reaction reached equilibrium within first three hours at 70 °C temperature, 4 wt% lipase load, and molar ratio of substrate 1:1.5. Under these conditions, final product contained 18.52% MCT, 56.65% MLCT, and 24.83% long-chain triacylglycerol (LCT). To reduce the MCT content, a solvent extraction process was performed, yielding 2.42% MCT, 56.19% MLCT, and 41.39% LCT. The obtained structured lipids (SLs), enriched in n-3 PUFAs, offer significant health benefits, enhanced bioavailability, with potential applications in functional foods and nutraceuticals.

Facile synthesis of iron nanoparticles from Camellia Sinensis leaves catalysed for biodiesel synthesis from Azolla filiculoides.

Recent years have seen an increase in research on biodiesel, an environmentally benign and renewable fuel alternative for traditional fossil fuels. Biodiesel might become more cost-effective and competitive with diesel if a solid heterogeneous catalyst is used in its production. One way to make biodiesel more affordable and competitive with diesel is to employ a solid heterogeneous catalyst in its manufacturing. Based on X-ray diffraction (XRD) and Fourier Transform infrared spectroscopy (FTIR), the researchers in this study proved their hypothesis that iron oxide core-shell nanoparticles were generated during the green synthesis of iron-based nanoparticles (FeNPs) from Camellia Sinensis leaves. The fabrication of spherical iron nanoparticles was successfully confirmed using scanning electron microscopy (SEM). As a heterogeneous catalyst, the synthesised catalyst has shown potential in facilitating the conversion of algae oil into biodiesel. With the optimal parameters (0.5 weight percent catalytic load, 1:6 oil-methanol ratio, 60 °C reaction temperature, and 1 h and 30 min reaction duration), a 93.33% yield was attained. This may be due to its acid-base property, chemical stability, stronger metal support interaction. Furthermore, the catalyst was employed for transesterification reactions five times after regeneration with n-hexane washing followed by calcination at 650 °C for 3 h.

Eco-friendly cellulose-based antioxidation film by partial esterification.

Cellulose nanocrystals (CNCs) have received increasing attention because of their superior dispersion and thermal stability. In this study, TEMPO-oxidized cellulose nanocrystal (TOCNC) multifunctional antioxidationantioxidation films (TOCNC-GA film) were prepared by the esterification of TOCNC and gallic acid (GA). TOCNC-GAX films, where X represents the ratio of the amount of GA to the amount of TOCNC, were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The films with the GA:TOCNC ratio of 1:1 achieved higher interfacial compatibility than the other films. The mechanical properties and water resistance of the TOCNC-GA films were superior than those of pure TOCNC films. Moreover, the original TOCNC structure changed owing to the presence of GA, which endowed a certain thermoplasticity owing to the formation of ester groups. The antioxidation properties of the TOCNC-GA1 films reached 43.8 % and 71.85 % after 6 and 24 h, respectively, as evaluated by the 2,2-biphenyl-1-picrylhydrazyl method and the free radical scavenging activities of the TOCNC-GA1 films. The innovative development of the functional antioxidation film presented in this paper has great potential for use in antioxidation packaging materials and food preservation.

Efficient Preparation of Biodiesel Using Sulfonated Camellia oleifera Shell Biochar as a Catalyst.

This study prepared sulfonated Camellia oleifera shell biochar using Camellia oleifera shell agricultural waste as a carbon source, and evaluated its performance as a catalyst for preparing biodiesel. The biochar obtained from carbonizing Camellia oleifera shells at 500 °C for 2 h serves as the carbon skeleton, and then the biochar is sulfonated with chlorosulfonic acid. The sulfonic acid groups are mainly grafted onto the surface of Camellia oleifera shell biochar through covalent bonding to obtain sulfonic acid type biochar catalysts. The catalysts were characterized by Scanning Electron Microscope (SEM), X-ray diffraction (XRD), Nitrogen adsorption-desorption Brunel-Emmett-Taylor Theory (BET), and Fourier-transform infrared spectroscopy (FT-IR). The acid density of the sulfonated Camellia oleifera fruit shell biochar catalyst is 2.86 mmol/g, and the specific surface area is 2.67 m2/g, indicating high catalytic activity. The optimal reaction conditions are 4 wt% catalyst with a 6:1 alcohol to oil ratio. After esterification at 70 °C for 2 h, the yield of biodiesel was 91.4%. Under the optimal reaction conditions, after four repeated uses of the catalyst, the yield of biodiesel still reached 90%. Therefore, sulfonated Camellia oleifera shell biochar is a low-cost, green, non-homogeneous catalyst with great potential for biodiesel production by esterification reaction in future development.

Enhanced Enzymatic Performance of Immobilized Pseudomonas fluorescens Lipase on ZIF-8@ZIF-67 and Its Application to the Synthesis of Neryl Acetate with Transesterification Reaction.

In this study, hybrid skeleton material ZIF-8@ZIF-67 was synthesized by the epitaxial growth method and then was utilized as a carrier for encapsulating Pseudomonas fluorescens lipase (PFL) through the co-precipitation method, resulting in the preparation of immobilized lipase (PFL@ZIF-8@ZIF-67). Subsequently, it was further treated with glutaraldehyde to improve protein immobilization yield. Under optimal immobilization conditions, the specific hydrolytic activity of PFL@ZIF-8@ZIF-67 was 20.4 times higher than that of the free PFL. The prepared biocatalyst was characterized and analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR). Additionally, the thermal stability of PFL@ZIF-8@ZIF-67 at 50 °C was significantly improved compared to the free PFL. After 7 weeks at room temperature, PFL@ZIF-8@ZIF-67 retained 78% of the transesterification activity, while the free enzyme was only 29%. Finally, PFL@ZIF-8@ZIF-67 was applied to the neryl acetate preparation in a solvent-free system, and the yield of neryl acetate reached 99% after 3 h of reaction. After 10 repetitions, the yields of neryl acetate catalyzed by PFL@ZIF-8@ZIF-67 and the free PFL were 80% and 43%, respectively.

A New Approach in Lipase-Octyl-Agarose Biocatalysis of 2-Arylpropionic Acid Derivatives.

The use of lipase immobilized on an octyl-agarose support to obtain the optically pure enantiomers of chiral drugs in reactions carried out in organic solvents is a great challenge for chemical and pharmaceutical sciences. Therefore, it is extremely important to develop optimal procedures to achieve a high enantioselectivity of the biocatalysts in the organic medium. Our paper describes a new approach to biocatalysis performed in an organic solvent with the use of CALB-octyl-agarose support including the application of a polypropylene reactor, an appropriate buffer for immobilization (Tris base-pH 9, 100 mM), a drying step, and then the storage of immobilized lipases in a climatic chamber or a refrigerator. An immobilized lipase B from Candida antarctica (CALB) was used in the kinetic resolution of (R,S)-flurbiprofen by enantioselective esterification with methanol, reaching a high enantiomeric excess (eep = 89.6 ± 2.0%). As part of the immobilization optimization, the influence of different buffers was investigated. The effect of the reactor material and the reaction medium on the lipase activity was also studied. Moreover, the stability of the immobilized lipases: lipase from Candida rugosa (CRL) and CALB during storage in various temperature and humidity conditions (climatic chamber and refrigerator) was tested. The application of the immobilized CALB in a polypropylene reactor allowed for receiving over 9-fold higher conversion values compared to the results achieved when conducting the reaction in a glass reactor, as well as approximately 30-fold higher conversion values in comparison with free lipase. The good stability of the CALB-octyl-agarose support was demonstrated. After 7 days of storage in a climatic chamber or refrigerator (with protection from humidity) approximately 60% higher conversion values were obtained compared to the results observed for the immobilized form that had not been stored. The new approach involving the application of the CALB-octyl-agarose support for reactions performed in organic solvents indicates a significant role of the polymer reactor material being used in achieving high catalytic activity.

Impacts of ultrasound-assisted Fenton degradation and alkaline de-esterification on structural properties and biological effects of pectic polysaccharides from Tartary buckwheat leaves.

Tartary buckwheat (Fagopyrum tataricum (L.) Gaertn) leaf has abundant rhamnogalacturonan-I enriched pectic polysaccharides, which exert various health-promoting effects. Nevertheless, the potential relationship between the chemical structure and the biological function of pectic polysaccharides from Tartary buckwheat leaves (TBP) remains unclear. Therefore, to bridge the gap between the chemical structure and the biological function of TBP, the impacts of ultrasound-assisted Fenton degradation (UFD) and mild alkaline de-esterification (MAD) on structural properties and biological effects of TBP were systematically studied. Compared with the native TBP (molecular mass, 9.537 × 104 Da), the molecular masses of degraded TBPs (TBP-MMW, 4.811 × 104 Da; TBP-LMW, 2.101 × 104 Da) were significantly reduced by the UFD modification, while their primary chemical structures were overall stable. Besides, compared with the native TBP (esterification degree, 22.73 %), the esterification degrees of de-esterified TBPs (TBP-MDE, 14.27 %; TBP-LDE, 6.59 %) were notably reduced by the MAD modification, while their primary chemical structures were also overall stable. Furthermore, the results revealed that both UFD and MAD modifications could significantly improve the antioxidant, antiglycation, and immunostimulatory effects of TBP. Indeed, TBP's biological effects were negatively correlated to its molecular mass and esterification degree, while positively linked to its free uronic acids. The findings demonstrate that both UFD and MAD modifications are promising techniques for the structural modification of TBP, which can remarkedly promote its biological effects. Besides, the present results are conducive to better understanding TBP's structure-bioactivity relationship.

Identification of sorbitol esterification of glutamic acid by LC-MS/MS in a monoclonal antibody stability assessment.

The stability of monoclonal antibodies (mAbs) is vital for their therapeutic success. Sorbitol, a common mAb stabilizer used to prevent aggregation, was evaluated for any potential adverse effects on the chemical stability of mAb X. An LC-MS/MS based analysis focusing on the post-translational modifications (PTMs) of mAb X was conducted on samples that had undergone accelerated aging at 40°C. Along with PTMs that are known to affect mAbs' structure function and stability (such as deamidation and oxidation), a novel mAb PTM was discovered, the esterification of glutamic acid by sorbitol. Incubation of mAb X with a 1:1 ratio of unlabeled sorbitol and isotopically labeled sorbitol (13C6) further corroborated that the modification was the consequence of the esterification of glutamic acid by sorbitol. Levels of esterification varied across glutamic acid residues and correlated with incubation time and sorbitol concentration. After 4 weeks of accelerated stability with isotopically labeled sorbitol, it was found that 16% of the total mAb possesses an esterified glutamic acid. No esterification was observed at aspartic acid sites despite the free carboxylic acid side chain. This study unveils a unique modification of mAbs, emphasizing its potential significance for formulation and drug development.

Ultrasonic-Assisted Preparation of Biodiesel Products from Vegetable Oils.

Utilizing vegetable oil as a sustainable feedstock, this study presents an innovative approach to ultrasonic-assisted transesterification for biodiesel synthesis. This alkaline-catalyzed procedure harnesses ultrasound as a potent energy input, facilitating the rapid conversion of extra virgin olive oil into biodiesel. In this demonstration, the reaction is run in an ultrasonic bath under ambient conditions for 15 min, requiring a 1:6 molar ratio of extra virgin olive oil to methanol and a minimum amount of KOH as the catalyst. The physiochemical properties of biodiesel are also reported. Emphasizing the remarkable advantages of ultrasonic-assisted transesterification, this method demonstrates notable reductions in reaction and separation times, achieving near-perfect purity (~100%), high yields, and negligible waste generation. Importantly, these benefits are achieved within a framework that prioritizes safety and environmental sustainability. These compelling findings underscore the effectiveness of this approach in converting vegetable oil into biodiesel, positioning it as a viable option for both research and practical applications.

Potential structure-function relationships of pectic polysaccharides from quinoa microgreens: Impact of various esterification degrees.

Pectic polysaccharides are one of the most vital functional ingredients in quinoa microgreens, which exhibit numerous health-promoting benefits. Nevertheless, the detailed information about the structure-function relationships of pectic polysaccharides from quinoa microgreens (QMP) remains unknown, thereby largely restricting their applications as functional foods or fortified ingredients. Therefore, to unveil the possible structure-function relationships of QMP, the mild alkali de-esterification was utilized to modify QMP, and then the correlations of esterification degrees of native and modified QMPs to their biological functions were systematically investigated. The results showed that the modified QMPs with different esterification degrees were successfully prepared by the mild alkali treatment, and the primary chemical structure (e.g., compositional monosaccharides and glycosidic linkages) of the native QMP was overall stable after the de-esterified modification. Furthermore, the results revealed that the antioxidant capacity, antiglycation effect, prebiotic potential, and immunostimulatory activity of the native QMP were negatively correlated to its esterification degree. In addition, both native and modified QMPs exerted immunostimulatory effects through activating the TLR4/NF-κB signaling pathway. These results are conducive to unveiling the precise structure-function relationships of QMP, and can also promote its applications as functional foods or fortified ingredients.

Effect of amylose partial extraction on citrate esterification of potato starch and its role in structure and physicochemical modification.

This study examines the impact and influence of amylose on the starch esterification reaction through partial extraction of amylose. Citric acid was added for the esterification reaction, and then the esterified starches' multiscale structure, physicochemical, and functional properties were evaluated. As the extraction time of amylose increased, the amylose content in the starch decreased. Higher concentrations of citric acid will lead to samples with a higher degree of substitution, with DS rising from 0.203 % (0 h) to 0.231 % (3.5 h) at CA3 treatment. While removing amylose had minimal effects on the crystal structure of starch granules, it did decrease the ratio of A and B1 chains and the molecular weight of amylose. Acid hydrolysis exacerbated these changes upon the addition of citric acid. Furthermore, removing amylose followed by citrate esterification resulted in lower pasting viscosity, enthalpy of gelatinization (from 13.37 J to 2.83 J), and degree of short-range ordering. Also, digestion shows a decrease caused by the increasing content of slow-digesting starch. The presence of amylose in starch granules does affect the formation of starch esters, and removing it before esterification modification may improve production efficiency and reduce costs to some extent.

Design and Semisynthesis of Biselectrophile-Functionalized Ubiquitin Probes To Investigate Transthioesterification Reactions.

Ubiquitin (Ub) regulates a wide array of cellular processes through post-translational modification of protein substrates. Ub is conjugated at its C-terminus to target proteins via an enzymatic cascade in which covalently bound Ub thioesters are transferred from E1 activating enzymes to E2 conjugating enzymes, and then to certain E3 protein ligases. These transthioesterification reactions proceed via transient tetrahedral intermediates. A variety of chemical strategies have been used to capture E1-Ub-E2 and E2-Ub-E3 mimics, but these introduce modifications that disrupt atomic spacing at the linkage point relative to the native tetrahedral intermediate. We have developed a biselectrophilic PSAN warhead that can be installed in place of the conserved C-terminal glycine in Ub and used to form ternary protein complexes linked via cyanomethyldithioacetals that closely mimic the native tetrahedral intermediates. Investigation of the reactivity of the warhead and substituted analogues led to an effective semisynthetic route to Ub-1-PSAN, which was used to form a ternary E1-Ub*-E2 complex as a mimic of the transthioesterification intermediate.