Development of sustainable alkali activated composite incorporated with sugarcane bagasse ash and polyvinyl alcohol fibers.

The infrastructure boom has driven up cement demand to 30 billion tons annually. To address this and promote sustainable construction, researchers are developing solutions for carbon-neutral building practices, aiming to transform industrial waste into an eco-friendly alternative. This study aims to develop and enhance the mechanical and durability properties of alkali-activated composites (AACs) by incorporating varying amounts (5, 10, 15, and 20%) of finely ground bagasse ash (GBA) and polyvinyl alcohol (PVA) fibers. Results indicate that higher GBA content initially reduces the 7th and 14th-day strength but results in increased strength at later ages. The optimum 28-day strength is achieved with a 10% GBA content, leading to a 10% increase in compressive strength, 8% increase in tensile strength, and 12% increase in flexural strength. Additionally, the incorporation of GBA enhanced the resistance of the composite to chloride ingress, thus reducing its conductance and increasing the overall durability. This study demonstrated the potential of GBA as an eco-friendly material, emphasizing the significance of tailored AACs formulations for durable and sustainable construction practices.

Bhargavaea beijingensis a promising tool for bio-cementation, soil improvement, and mercury removal.

Microbially Induced Calcite Precipitation (MICP) has emerged as a promising technique for bio-cementation, soil improvement, and heavy metal remediation. This study explores the potential of Bhargavaea beijingensis, a urease-producing bacterium, for these applications. Six ureolytic bacteria were isolated from calcareous bricks mine soil and screened for urease and calcite production. B. beijingensis exhibited the highest urease activity and calcite precipitation. Urease activity, calcite precipitation, sand solidification, heavy metal removal efficiency, and compressive strength were evaluated. It showed significant heavy metal removal efficiency, particularly highest for HgCl2. Mortar blocks treated with B. beijingensis or its crude enzyme exhibited improved compressive strength, suggesting its potential for bio-cementation. Crack remediation tests demonstrated successful crack healing in mortar blocks using the bacterium or its enzyme. This study identifies B. beijingensis as a novel and promising MICP agent with potential applications in bio-cementation, soil improvement, and heavy metal remediation. Hence, B. beijingensis diversified abilities prove superior performance compared to commonly used strains like Bacillus subtilis and Shewanella putrefaciens in bio-cementation applications. Its high urease activity, calcite precipitation, and heavy metal removal abilities make it a valuable candidate for sustainable and eco-friendly solutions in various fields.

Generalisation of the yield stress measurement in three point bending collapse tests: application to 3D printed flax fibre reinforced hydrogels.

This paper describes the extrusion pressure's effect on composite hydrogel inks' filaments subjected to three point bending collapse tests. The composite considered in this work consists of an alginate-poloxamer hydrogel reinforced with flax fibres. Increased extrusion pressure resulted in more asymmetrical filaments between the support pillars. Furthermore, the material and printing conditions used in the present study led to the production of curved specimens. These two characteristics implicitly limit the validity of the yield stress equations commonly used in open literature. Therefore, a new system of equations was derived for the case of asymmetrical and curved filaments. A post-processing method was also created to obtain the properties required to evaluate this yield stress. This new equation was then implemented to identify the strength of failed hydrogels without flax fibre reinforcement. A statistical analysis showed this new equation's significance, which yielded statistically higher (i.e. 1.15 times larger) strength values compared to the numbers obtained with the open literature equations. At larger extrusion pressures, longer periods were needed for the material to converge towards its final shape. Larger extrusion pressure values led to lower yield stresses within the composite hydrogel filament: a 5 kPa increase in extrusion pressure lowered the yield stress by 19%. In comparison, a 15 kPa increase led to a 29% decrease in the yield stress. Overall this study provides guidelines to standardize three point bending collapse tests and analysis comparison between different materials.

Enhancing craniofacial bone tissue engineering strategy: integrating rapid wet chemically synthesised bioactive glass with photopolymerized resins.

BACKGROUND: Craniofacial bone regeneration represents a dynamic area within tissue engineering and regenerative medicine. Central to this field, is the continual exploration of new methodologies for template fabrication, leveraging established bio ceramic materials, with the objective of restoring bone integrity and facilitating successful implant placements. METHODS: Photopolymerized templates were prepared using three distinct bio ceramic materials, specifically a wet chemically synthesized bioactive glass and two commercially sourced hydroxyapatite variants. These templates underwent comprehensive characterization to assess their physicochemical and mechanical attributes, employing techniques including Fourier transform infrared spectroscopy, scanning electron microscopy, and nano-computed tomography. Evaluation of their biocompatibility was conducted through interaction with primary human osteoblasts (hOB) and subsequent examination using scanning electron microscopy. RESULTS: The results demonstrated that composite showed intramolecular hydrogen bonding interactions with the photopolymer, while computerized tomography unveiled the porous morphology and distribution within the templates. A relatively higher porosity percentage (31.55 ± 8.70%) and compressive strength (1.53 ± 0.11 MPa) was noted for bioactive glass templates. Human osteoblast cultured on bioactive glass showed higher viability compared to other specimens. Scanning micrographs of human osteoblast on templated showed cellular adhesion and the presence of filopodia and lamellipodia. CONCLUSION: In summary these templates have the potential to be used for alveolar bone regeneration in critical size defect. Photopolymerization of bioceramics may be an interesting technique for scaffolds fabrication for bone tissue engineering application but needs more optimization to overcome existing issues like the ideal ratio of the photopolymer to bioceramics.

Potential role of calcium sulfate/ß-tricalcium phosphate/graphene oxide nanocomposite for bone graft application_mechanical and biological analyses.

BACKGROUND: Bone grafts are extensively used for repairing bone defects and voids in orthopedics and dentistry. Moldable bone grafts offer a promising solution for treating irregular bone defects, which are often difficult to fill with traditional rigid grafts. However, practical applications have been limited by insufficient mechanical strength and rapid degradation. METHODS: This study developed a ceramic composite bone graft composed of calcium sulfate (CS), ß-tricalcium phosphate (ß-TCP) with/without graphene oxide (GO) nano-particles. The biomechanical properties, degradation rate, and in-vitro cellular responses were investigated. In addition, the graft was implanted in-vivo in a critical-sized calvarial defect model. RESULTS: The results showed that the compressive strength significantly improved by 135% and the degradation rate slowed by 25.5% in comparison to the control model. The addition of GO nanoparticles also improved cell compatibility and promoted osteogenic differentiation in the in-vitro cell culture study and was found to be effective at promoting bone repair in the in-vivo animal model. CONCLUSIONS: The mixed ceramic composites presented in this study can be considered as a promising alternative for bone graft applications.

Hydrogel Dressing Biomaterial Enriched with Vitamin C: Synthesis and Characterization.

Materials engineering has become an important tool in the field of hydrogel dressings used to treat difficult-to-heal wounds. Hydrogels filled with bioactive substances used as a targeted healing system are worthy of attention. Vitamin C has healing and supporting effects in the treatment of many skin problems. The aim of the research was to produce a hydrogel biomaterial enriched with ascorbic acid for use as a dressing for difficult-to-heal wounds. A total of four different dressings were developed, each with different modifications in each layer. The dressing with vitamin C in the third layer was shown to release vitamin C ions more slowly than the dressing with vitamin C in the first layer. The studies conducted have shown that the dressings containing vitamin C have, among other things, a higher compressive strength, are characterised by a lower relative shortening after the application of force and shorten without damage at a lower force than in the case of a dressing without vitamin C. The dressings designed have a very good stability in the temperature range of 18 °C to 60 °C. It was found that the higher the vitamin C content in the dressing, the greater the increase in the specific heat value of the transformations. Therefore, hydrogel dressings containing vitamin C may be candidates for local delivery of vitamin C to the skin and protection of the wound area.

Material-Sparing Approach to Predict Tablet Capping Under Processing Compression Conditions Based on Mechanical and Molecular Properties Derived from Compaction Simulation and Crystal Structural Analysis.

Present study evaluates the usability of compaction simulation-based mechanical models as a material-sparing approach to predict tablet capping under processing compression conditions using Acetaminophen (APAP) and Ibuprofen (IBU). Measured mechanical properties were evaluated using principal component analysis (PCA) and principal component regression (PCR) models. PCR models were then utilized to predict the capping score (CS) from compression pressure (CP). APAP formulations displayed a quadratic correlation between CS and CP, with CS rank order following CP of 200MPa < 300MPa < 100MPa, indicating threshold compression pressure (TCP) limit between 200 and 300 MPa, resulting in higher CS at 300 than 200 MPa regardless of increased CP. IBU formulations displayed a linear correlation between CS and CP, with CS rank order following CP of 100MPa < 200MPa < 300MPa, indicating TCP limit between 100 and 200 MPa, resulting in higher CS at 200 and 300 than 100 MPa regardless of increased CP. Molecular models were developed as validation methods to predict capping from CP. Measured XRPD patterns of compressed tablets were linked with calculated Eatt and d-spacing of slip planes and analyzed using variable component least square methods to predict TCP triggering cleavage in slip planes and leading to capping. In APAP and IBU, TCP values were predicted at 245 and 175 MPa, meaning capped tablets above these TCP limits regardless of increased CP. A similar trend was observed in CS predictions from mechanical assessment, confirming that compaction simulation-based mechanical models can predict capping risk under desired compression conditions rapidly and accurately.

Recycle of steel slag as cementitious material and fine aggregate in concrete: mechanical, durability property and environmental impact.

Using steel slag (SS) as cementitious material and fine aggregate in concrete is an effective and environmental method for SS consumption and cost reduction. In this paper, SS was recycled in large volumes in concrete as partial cementitious material and fine aggregate. The compressive strength and reaction mechanism of cementitious material with different SS powder contents including 20%, 25%, 30%, and 35% were presented. The results indicated that 20% of SS powder improved the compressive strength by 34.57% and the hydration products were ettringite (AFt) and calcium silica hydrate(C-(A)-S-H). Furthermore, the mechanical and durability performance of concrete with SS as fine aggregate were investigated. When the SS substitution rate was 75%, the compressive strength was increased by 37.83%. The volume shrinkage rate and 28d-carbonation depth were reduced nearly by 64% for 90 days and 2.33 mm, respectively. The chloride ion penetration resistance reached the optimal grade Q-V and abrasion resistance was improved by nearly 24%. Along with the reduced CO2 by 210-294 kg/m3 and the decreased cost by 12.61 USD/m3, it is regarded as an effective method to consume steel slag. As such, this research provided a scientific and systematic basis for the large-scale disposal and utilization of industrial waste residues as well as recycled materials preparation.

Tailoring the structural and physicochemical properties of rice straw cellulose-based cryogels by cell-mediated polyhydroxyalkanoate deposition.

This study presents a novel biotechnological approach for creating water vapor-resistant cryogels with improved integrity. Rice straw cellulose was transformed into nanofibrils through TEMPO-mediated oxidation and high-pressure homogenization. The resulting cryogels remained firm even when immersed in aqueous media, whose pores were used by live cell to deposit polyhydroxyalkanoate (PHA) particles inside them. This novel method allowed the compatibilization of PHA within the cellulosic fibers. As a consequence, the water sorption capacity was decreased by up to 6 times having just 4 % of PHA compared to untreated cryogels, preserving the cryogel density and elasticity. Additionally, this technique can be adapted to various bacterial strains and PHA types, allowing for further optimization. It was demonstrated that the amount and type of PHA (medium chain length and small chain length-PHA) used affects the properties for the cryogels, especially the water vapor sorption behavior and the compressive strength. Compared to traditional coating methods, this cell-mediated approach not only allows to distribute PHA on the surface of the cryogel, but also ensures polymer penetration throughout the cryogel due to bacterial self-movement. This study opens doors for creating cryogels with tunable water vapor sorption and other additional functionalities through the use of specialized PHA variants.

Study on the corrosion behavior and mechanical response of weakly cemented sandstone in alkaline solutions.

This study examines the corrosion characteristics of weakly cemented sandstone under alkaline conditions, evaluating the effects of varying pH levels on its macroscopic degradation, micro-porosity, and mechanical properties, notably uniaxial compressive strength. Findings reveal that heightened alkalinity exacerbates rock damage, although a temporary alleviation in mass loss occurs between pH 9 and 11 due to pore clogging by complexes formed from cations like Ca2+ and Mg2+.Increased alkalinity induces marked changes in pore features, with an observed rise in pore numbers, transformation of pore shapes from elongated to more spherical, and adjustments in porosity, pore size, and roundness. Furthermore, the study confirms a decline in both the rock's compressive strength and elastic modulus as pH rises. These revelations shed light on the role of pH in the corrosion behavior of weakly cemented sandstone under alkaline conditions, providing a fresh perspective for understanding its corrosion mechanisms in such environments.

Use of pumice stone and silica fume as precursor material for the design of a geopolymer.

Background: Geopolymers are alternative materials to cement because they require less energy in their production process; hence, they contribute to the reduction in CO 2 emissions. This study aims to evaluate the possibility of using industrial residues such as silica fume (SF) to improve the physical and mechanical properties of a pumice stone (PS)-based geopolymer. Methods: Through an experimental methodology, the process starts with the extraction, grinding, and sieving of the raw material to carry out the physical and chemical characterization of the resulting material, followed by the dosage of the geopolymer mixture considering the factors that influence the resistance mechanical strength. Finally, the physical and mechanical properties of the geopolymer were characterized. This research was carried out in four stages: characterization of the pumice stone, design of the geopolymer through laboratory tests, application according to the dosage of the concrete, and analysis of the data through a multi-criteria analysis. Results: It was determined that the optimal percentage of SF replacement is 10%, which to improves the properties of the geopolymer allowing to reach a maximum resistance to compression and flexion of 14.10 MPa and 4.78 MPa respectively, showing that there is a direct relationship between the percentage of SF and the resistance. Conclusions: Geopolymer preparation involves the use of PS powder with a composition rich in silicon and aluminum. The factors influencing strength include the ratio of sodium silicate to sodium hydroxide, water content, temperature, curing time, molarity of sodium hydroxide, and binder ratio. The results showed an increase in the compression and flexural strength with 10% SF replacement. The geopolymer's maximum compressive strength indicates its non-structural use, but it can be improved by reducing the PS powder size.

New Insights Into Application Relevant Properties of Cu2+-Doped Brushite Cements.

Doping of brushite cements with metal ions can entail many positive effects on biological and physicochemical properties. Cu2+ ions are known to exhibit antibacterial properties and can additionally have different positive effects on cells as trace elements, whereas high Cu2+ concentrations are cytotoxic. For therapeutical applications of bone cement, a combination of good biocompatibility and sufficient mechanical properties is required. Therefore, the aim of this study was to investigate different physicochemical and biological aspects, relevant for application, of a brushite cement with Cu2+-doped ß-tricalcium phosphate, monocalcium phosphate monohydrate and phytic acid as setting retarder. Additionally, the ion release was compared with a cement with citric acid as setting retarder. The investigated cements showed good injectability coefficients, as well as compressive strength values sufficient for application. Furthermore, no antibacterial effects were detected irrespective of the Cu2+ concentration or the bacterial strain. The cell experiments with eluate samples showed that the viability of MC3T3-E1 cells tended to decrease with increasing Cu2+ concentration in the cement. It is suggested that these biological responses are caused by the difference in the Cu2+ release from the hardened cement depending on the solvent medium. Furthermore, the cements showed a steady release of Cu2+ ions to a lesser extent in comparison with a cement with citric acid as setting retarder, where a burst release of Cu2+ was observed. In conclusion, despite the anticipated antibacterial effect of Cu2+-doped cements was lacking and mammalian cell viability was slightly affected, Cu2+-concentrations maintained the physicochemical properties as well as the compressive strength of cements and the slow ion release from cements produced with phytic acid is considered advantageous compared to citric acid-based formulations.

Evaluation of the physical properties of bromelain-modified biodentine for direct pulp capping.

BACKGROUND: This study aims to evaluate the compressive strength, solubility, radiopacity, and flow of Bromelain (BR)-modified Biodentine (BD) for direct pulp capping (DPC). This is suggested to determine the impact of BR on the physical properties of BD. METHODS: Eighty samples were prepared according to the ISO and ADA specifications and evaluated for compressive strength, solubility, radiopacity, and flow. The compressive strength was evaluated at 24 h and 21 days via a universal testing machine. The solubility was determined by weight loss after 24-hours immersion in deionized water. Radiopacity was assessed via X-ray with aluminum step-wedges, and flow was measured by the diameter of the discs under a standard weight. Independent sample t-tests were used to statistically assess the data. A significance level of 5% was considered. RESULTS: The compressive strength was 41.08 ± 1.84 MPa for BD and 40.92 ± 1.80 MPa for BR + BD after 24 h, and 88.93 ± 3.39 MPa for BD and 87.92 ± 3.76 MPa for BR + BD after 21 days, with no significant differences. Solubility was slightly greater in the BR + BD (2.75 ± 0.10%) compared to BD (2.62 ± 0.25%), but not significantly different. The radiopacity was similar between BD (2.82 ± 0.11 mm) and BR + BD (2.73 ± 0.10 mm). BR + BD resulted in significantly greater flow (9.99 ± 0.18 mm) than did BD (9.65 ± 0.27 mm) (p ≤ 0.05). CONCLUSION: BR-modified BD maintains BD's physical properties, with improved flow, making it a promising DPC agent that warrants further study.

Bicortical Compression and Construct Stability With Variable Pitch Locking Screws in Cadaveric Specimens.

OBJECTIVES: A variable pitch locking screw is intended to provide interfragmentary compression combined with fixed angle stability of locking plate constructs. The objective of this study was to compare variable pitch locking screws (3.5-mm KreuLock Ti locking compression screws, Arthrex Inc., Naples, FL) with standard locking screws (from the same manufacturer) in bicortical fixation scenarios in cadaver bone by assessing (1) interfragmentary compression and plate-bone compression and (2) construct biomechanical stability. METHODS: Nine matched pairs of fresh-frozen cadaveric specimens with an average age of 67.2 years (range, 37-83) were used. Interfragmentary compression and plate-bone compression associated with insertion of single bicortical screws were compared between the variable pitch and standard locking screws at increasing levels of torque. The specimens tested were distal tibiae having a simulated longitudinal fracture. Additionally, fibulae were osteotomized to create a stable longitudinal fracture pattern and were fixed with a 5-screw plate construct with either all variable pitch or all standard locking screws. One of the 5 screws was placed across the osteotomy without lagging. Fibulae were tested cyclically with axial with torsional loading to compare displacements, rotation, and loads at failure or tested in 4-point bending to compare construct stiffness and maximum force to failure. RESULTS: Interfragmentary and plate-bone compression forces in the distal tibia model varied across specimens but were significantly higher with variable pitch locking screws compared with standard locking screws [512 N (SD = 324 N) vs. 79 N (SD = 64 N), P = 0.002, and 242 N (SD = 119 N) vs. 104 N (SD = 123 N), P = 0.028, respectively]. In cyclic loading of fibula constructs, no significant differences were detected in construct axial displacement or angular displacement (P > 0.05). In 4-point bending, no differences were detected in maximum force or bending stiffness (P > 0.05). CONCLUSIONS: Variable pitch locking screws produced interfragmentary compression between cortices and plate-bone compression that was greater than that produced by standard locking screws. In a stable bicortical fibula fixation scenario under external loading, the stability of variable pitch locking screw constructs was similar to constructs with standard locking screws.

Compressive strength prediction and low-carbon optimization of fly ash geopolymer concrete based on big data and ensemble learning.

Portland cement concrete (PCC) is a major contributor to human-made CO2 emissions. To address this environmental impact, fly ash geopolymer concrete (FAGC) has emerged as a promising low-carbon alternative. This study establishes a robust compressive strength prediction model for FAGC and develops an optimal mixture design method to achieve target compressive strength with minimal CO2 emissions. To develop robust prediction models, comprehensive factors, including fly ash characteristics, mixture proportions, curing parameters, and specimen types, are considered, a large dataset comprising 1136 observations is created, and polynomial regression, genetic programming, and ensemble learning are employed. The ensemble learning model shows superior accuracy and generalization ability with an RMSE value of 1.81 MPa and an R2 value of 0.93 in the experimental validation set. Then, the study integrates the developed strength model with a life cycle assessment-based CO2 emissions model, formulating an optimal FAGC mixture design program. A case study validates the effectiveness of this program, demonstrating a 16.7% reduction in CO2 emissions for FAGC with a compressive strength of 50 MPa compared to traditional trial-and-error design. Moreover, compared to PCC, the developed FAGC achieves a substantial 60.3% reduction in CO2 emissions. This work provides engineers with tools for compressive strength prediction and low carbon optimization of FAGC, enabling rapid and highly accurate design of concrete with lower CO2 emissions and greater sustainability.

A comprehensive experimental analysis of the local passive response across the healthy porcine left ventricle.

This work provides a comprehensive characterization of porcine myocardial tissue, combining true biaxial (TBx), simple triaxial shear (STS) and confined compression (CC) tests to analyze its elastic behavior under cyclic loads. We expanded this study to different zones of the ventricular free wall, providing insights into the local behavior along the longitudinal and radial coordinates. The aging impact was also assessed by comparing two age groups (4 and 8 months). Resulting data showed that the myocardium exhibits a highly nonlinear hyperelastic and incompressible behavior. We observed an anisotropy ratio of 2-2.4 between averaged peak stresses in TBx tests and 1-0.59-0.40 orthotropy ratios for normalised fiber-sheet-normal peak stresses in STS tests. We obtained a highly incompressible response, reaching volumetric pressures of 2-7 MPa for perfused tissue in CC tests, with notable differences when fluid drainage was allowed, suggesting a high permeability. Regional analysis showed reduced stiffness and anisotropy (20-25%) at the apical region compared to the medial, which we attributed to differences in the fiber field dispersion. Compressibility also increased towards the epicardium and apical regions. Regarding age-related variations, 8-month animals showed stiffer response (at least 25% increase), particularly in directions where the mechanical stress is absorbed by collagenous fibers (more than 90%), as supported by a histological analysis. Although compressibility of perfused tissue remained unchanged, permeability significantly reduced in 8-month-old animals. Our findings offer new insights into myocardial properties, emphasizing on local variations, which can help to get a more realistic understanding of cardiac mechanics in this common animal model. STATEMENT OF SIGNIFICANCE: In this work, we conducted a comprehensive analysis of the passive mechanical behavior of porcine myocardial tissue through biaxial, triaxial shear, and confined compression tests. Unlike previous research, we investigated the variation in mechanical response across the left ventricular free wall, conventionally assumed homogeneous, revealing differences in terms of stiffness and compressibility. Additionally, we evaluated age-related effects on mechanical properties by comparing two age groups, observing significant variations in stiffness and permeability. To date, there has been no such in-depth exploration of myocardial elastic response and compressibility considering regional variations along the wall and may contribute to a better understanding of the cardiac tissue's passive mechanical response.

Incorporating nanosilver with glass ionomer cement-A literature review.

OBJECTIVES: The objectives of this study were to retrieve and review studies that incorporated nanosilver with GIC and summarise the evidence regarding the properties of nanosilver-modified GIC. MATERIALS AND METHODS: Two independent researchers performed a literature search using the keywords (nanosilver OR nano-silver OR (nano silver) OR (silver nanoparticles)) AND (GIC OR (glass ionomer cement) OR (glass ionomer cements)) in PubMed, Web of Science and ScienceDirect. RESULTS: A total of 368 articles were identified. After removing duplicate results, titles and abstracts were screened for eligibility. Full texts of publications that investigated the manufacture and properties of nanosilver-modified GIC were retrieved and analysed. Finally, 21 studies were included. CONCLUSIONS: All of the studies reviewed in this investigation included the incorporation of nanosilver in GIC. The proportions of nanosilver added into GIC varied from 0.05 % to 50 %. Thirteen studies investigated the antimicrobial properties of nanosilver-modified GIC; all studies supported that adding nanosilver enhanced antimicrobial effectiveness. Nineteen studies reported the mechanical properties including compressive strength, flexure strength, tensile strength, and microhardness of nanosilver-modified GIC; but the results were inconclusive. Four studies tested the bonding strength of nanosilver-modified GIC to dentine and found that adding nanosilver would not influence the bonding property of GIC. Some studies explored fluoride release level, colour stability, and cytotoxicity of nanosilver-modified GIC; but the results were all inconclusive. CLINICAL SIGNIFICANCE: This literature review is the first study to retrieve and summarise the findings and evidence regarding nanosilver-modified GIC research. It can provide clinicians with clinically relevant information about novel GIC materials that can be used in their treatment decisions.

Radiopaque and Biocompatible PMMA Bone Cement Triggered by Nano Tantalum Carbide and Its Osteogenic Performance.

Poly(methyl methacrylate) (PMMA) bone cements have been widely used in orthopedics; thanks to their excellent mechanical properties, biocompatibility, and chemical stability. Barium sulfate and zirconia are usually added into PMMA bone cement to enhance the X-ray radiopacity, while the mechanical strength, radiopacity, and biocompatibility are not well improved. In this study, an insoluble and corrosion-resistant ceramic, tantalum carbide (TaC), was added into the PMMA bone cement as radiopacifies, significantly improving the mechanical, radiopaque, biocompatibility, and osteogenic performance of bone cement. The TaC-PMMA bone cement with varied TaC contents exhibits compressive strength over 100 MPa, higher than that of the commercial 30% BaSO4-PMMA bone cement. Intriguingly, when the TaC content reaches 20%, the radiopacity is equivalent to the commercial bone cement with 30% of BaSO4 in PMMA. The cytotoxicity and osteogenic performance indicate that the incorporation of TaC not only enhances the osteogenic properties of PMMA but also does not reduce cell viability. This study suggests that TaC could be a superior and multifunctional radio-pacifier for PMMA bone cement, offering a promising avenue for improving patient outcomes in orthopedic applications.

Incorporation of carboxymethyl chitosan (CMCS) for the modulation of physio-chemical characteristics and cell proliferation environment of the composite hydrogel microspheres.

Hydrogels have excellent swelling properties and have been widely applied in tissue engineering because of their similarity to the extracellular matrix (ECM). Sodium alginate (SA) and carboxymethyl chitosan (CMCS) were prepared into hydrogel microspheres with Ca2+crosslinking in our study. The morphology, inner structure, mechanical properties, water content, swelling rate and BMP-2 loading and releasing properties were characterized. Our results showed that the composite SA /CMCS hydrogel microspheres were translucent and spherical in shape with uniform particle size. The incorporation of CMCS further increased the diameters of the microspheres, internal pore structure, water content, and mechanical properties of the SA/CMCS hydrogel microspheres. At the same SA concentration, with the increase of CMSC concentration, the diameter of microspheres could be increased by about 0.4 mm, the water content can be increased about 1%-2%. As for the mechanical properties, the compressive strength can be increased by 0.04-0.1 MPa, and the modulus of elasticity can be increased by 0.1-0.15 MPa. BMP-2 was chosen as a model agent and it could be loaded into SA/CMCS microspheres, and the incorporation of CMCS increased BMP-2 loading. The encapsulated BMP-2 was sustainably releasedin vitro. The leaching solutions of the SA/CMCS hydrogel microspheres exhibited good cytocompatibility and could increase ALP activity, ALP expression, and biomineralization on MC3T3-E1 cells. After 7 d of co-culture, ALP activities in S2.5C2 and S2.5C3 groups was increased by 50% and 45% compared with that of the control group. When embedded in the SA/CMCS microspheres, the MC3T3-E1 cells were evenly distributed inside the hydrogel microspheres and remained viable. Transcriptomic studies showed that incorporation of CMCS induced upregulation of 1141 differentially expressed genes (DEGs) and downregulation of 1614 DEGs compared with SA microspheres. The most significantly enriched pathways were the Wnt and MAPK signaling pathways induced by the incorporation of CMCS and BMP-2. In conclusion, our results indicated that the physiochemical characteristics of the SA hydrogel microspheres could be greatly modulated by CMCS to better mimic the ECM microenvironment and induce osteo-inductive activities of MC3T3-E1 cells.

An injectable self-healing alginate hydrogel with desirable mechanical and degradation properties for enhancing osteochondral regeneration.

Articular cartilage and subchondral bone defects have always been problematic because the osteochondral tissue plays a crucial role in the movement of the body and does not recover spontaneously. Here, an injectable hydrogel composed of oxidized sodium alginate/gelatin/chondroitin sulfate (OSAGC) was designed for the minimally invasive treatment and promotion of osteochondral regeneration. The OSAGC hydrogel had a double network based on dynamic covalent bonds, demonstrating commendable injectability and self-healing properties. Chondroitin sulfate was organically bound to the hydrogel network, retaining its own activity and gradually releasing during the degradation process as well as improving mechanical properties. The compressive strength could be increased up to 3 MPa by regulating the concentration of chondroitin sulphate and the oxidation level, and this mechanical stimulation could help repair injured tissue. The OSAGC hydrogel had a favourable affinity to articular cartilage and was able to release active ingredients in a sustained manner over 3 months. The OSAGC showed no cytotoxic effects. Results from animal studies demonstrated its capacity to regenerate new bone tissue in four weeks and new cartilage tissue in twelve weeks. The OSAGC hydrogel represented a promising approach to simplify bone surgery and repair damaged osteochondral tissue.