Photochemical degradation of antibiotics: real-time investigation by aerodynamic thermal breakup droplet ionization mass spectrometry.

A method is proposed for studying photochemical reactions in solution in real time using aerodynamic/thermal breakup droplet ionization mass spectrometry. Capabilities of the method were demonstrated by analyses of photodegradation processes of three antibiotics (thiamphenicol, ciprofloxacin, and ofloxacin) by means of aqueous solutions. The method rapidly provided information about photochemical changes for understanding the photochemical processes.

Laser-induced CdS/TiO2/graphene dual photoanodes for ratiometric self-powered photoelectrochemical sensor: an innovative approach for aflatoxin B1 detection.

A ratiometric self-powered photoelectrochemical sensor based on laser direct writing technology was constructed to address the problem that the conventional single-signal detection mode was susceptible to the influence of instrumentation and environmental factors, which interfered with the detection results. Laser-induced CdS/TiO2/Graphene was prepared as dual photoanodes (PA1 and PA2), which were controlled by multiplexed switches to form a photocatalytic fuel cell with Pt cathode. By modifying the aptamer of aflatoxin B1 (AFB1) on the photoanode surface, the target was specifically captured to the electrode surface to form a biological complex, which increased the steric hindrance and affected the electron transfer, thus reducing the output signal of the sensor. Targets with different concentrations were incubated on the surface of PA1, and targets with fixed concentrations were incubated on the surface of PA2. Under the control of the multiplex switch, the output signals of the two photoanodes were recorded, and the ratio of these two signals was used as the basis for the quantitative detection of AFB1. The sensor output was linearly increasing with the logarithm of AFB1 concentration from 1.0 to 150 ng mL-1 and the detection limit was 0.0974 ng mL-1. Additionally, this method had good stability, fast response, and good selectivity to real samples, providing an effective method for food safety monitoring.

Targeted Photoconvertible BODIPYs Based on Directed Photooxidation-Induced Conversion for Applications in Photoconversion and Live Super-Resolution Imaging.

Photomodulable fluorescent probes are drawing increasing attention due to their applications in advanced bioimaging. Whereas photoconvertible probes can be advantageously used in tracking, photoswitchable probes constitute key tools for single-molecule localization microscopy to perform super-resolution imaging. Herein, we shed light on a red and far-red BODIPY, namely, BDP-576 and BDP-650, which possess both properties of conversion and switching. Our study demonstrates that these pyrrolyl-BODIPYs convert into typical green- and red-emitting BODIPYs that are perfectly adapted to microscopy. We also showed that this pyrrolyl-BODIPYs undergo Directed Photooxidation Induced Conversion, a photoconversion mechanism that we recently introduced, where the pyrrole moiety plays a central role. These unique features were used to develop targeted photoconvertible probes toward different organelles or subcellular units (plasma membrane, mitochondria, nucleus, actin, Golgi apparatus, etc.) using chemical targeting moieties and a Halo tag. We notably showed that BDP-650 could be used to track intracellular vesicles over more than 20 min in two-color imagings with laser scanning confocal microscopy, demonstrating its robustness. The switching properties of these photoconverters were studied at the single-molecule level and were then successfully used in live single-molecule localization microscopy in epithelial cells and neurons. Both membrane- and mitochondria- targeted probes could be used to decipher membrane 3D architecture and mitochondrial dynamics at the nanoscale. This study builds a bridge between the photoconversion and photoswitching properties of probes undergoing directed photooxidation and shows the versatility and efficacy of this mechanism in advanced live imaging.

Unlocking carbene reactivity by metallaphotoredox α-elimination.

The ability to tame high-energy intermediates is important for synthetic chemistry, enabling the construction of complex molecules and propelling advances in the field of synthesis. Along these lines, carbenes and carbenoid intermediates are particularly attractive, but often unknown, high-energy intermediates1,2. Classical methods to access metal carbene intermediates exploit two-electron chemistry to form the carbon-metal bond. However, these methods are usually prohibitive because of reagent safety concerns, limiting their broad implementation in synthesis3-6. Mechanistically, an alternative approach to carbene intermediates that could circumvent these pitfalls would involve two single-electron steps: radical addition to metal to forge the initial carbon-metal bond followed by redox-promoted α-elimination to yield the desired metal carbene intermediate. Here we realize this strategy through a metallaphotoredox platform that exploits iron carbene reactivity using readily available chemical feedstocks as radical sources and α-elimination from six classes of previously underexploited leaving groups. These discoveries permit cyclopropanation and σ-bond insertion into N-H, S-H and P-H bonds from abundant and bench-stable carboxylic acids, amino acids and alcohols, thereby providing a general solution to the challenge of carbene-mediated chemical diversification.

Crystal structure reveals the binding mode and selectivity of a photoswitchable ligand for the adenosine A2A receptor.

Rational synthetic expansion of photoresponsive ligands is important for photopharmacological studies. Adenosine A2A receptor (A2AR) is stimulated by adenosine and related in Parkinson's disease and other diseases. Here, we report the crystal structure of the A2AR in complex with the novel photoresponsive ligand photoNECA (blue) at 3.34 Å resolution. PhotoNECA (blue) was designed for this structural study and the cell-based assay showed a photoresponsive and receptor selective characteristics of photoNECA (blue) for A2AR. The crystal structure explains the binding mode, photoresponsive mechanism and receptor selectivity of photoNECA (blue). Our study would promote not only the rational design of photoresponsive ligands but also dynamic structural studies of A2AR.

Multimodal Carbon Monoxide Photorelease from Flavonoids.

Photooxygenation of flavonoids leads to the release of carbon monoxide (CO). Our structure-photoreactivity study, employing several structurally different flavonoids, including their 13C-labeled analogs, revealed that CO can be produced via two completely orthogonal pathways, depending on their hydroxy group substitution pattern and the reaction conditions. While photooxygenation of the enol 3-OH group has previously been established as the CO liberation channel, we show that the catechol-type hydroxy groups of ring B can predominantly participate in photodecarbonylation.

Visible-Light Mediated Deoxygenation of Carboxylic Acid for Late-Stage Peptide Modification Targeting Dehydroalanine.

A visible-light mediated deoxygenative radical addition of carboxylic acids to dehydroalanines has been disclosed. The method can be used in ß-acyl alanine derivative synthesis, including those chiral and deuterated variants, and late-stage peptide modification with various functional groups, both in the homogeneous phase and on the resin in SPPS. It provides a new tool kit for rapid construction of bioactive peptide analogues, which has been demonstrated by modification of the antimicrobial peptide Feleucin-K3.

Optical Control of Protein Functions via Genetically Encoded Photocaged Aspartic Acids.

Site-specific protein decaging by light has become an effective approach for in situ manipulation of protein activities in a gain-of-function fashion. Although successful decaging of amino acid side chains of Lys, Tyr, Cys, and Glu has been demonstrated, this strategy has not been extended to aspartic acid (Asp), an essential amino acid residue with a range of protein functions and protein-protein interactions. We herein reported a genetically encoded photocaged Asp and applied it to the photocontrolled manipulation of a panel of proteins including firefly luciferase, kinases (e.g., BRAF), and GTPase (e.g., KRAS) as well as mimicking the in situ phosphorylation event on kinases. As a new member of the increasingly expanded amino acid-decaging toolbox, photocaged Asp may find broad applications for gain-of-function study of diverse proteins as well as biological processes in living cells.

Chemical synthesis of on demand-activated SUMO-based probe by a photocaged glycine-assisted strategy.

The transiently-activated SUMO probes are conducive to understand the dynamic control of SENPs activity. Here, we developed a photocaged glycine-assisted strategy for the construction of on demand-activated SUMO-ABPs. The light-sensitive groups installed at G92 and G64 backbone of SUMO-2 can temporarily block probes activity and hamper aspartimide formation, respectively, which enabled the efficient synthesis of inert SUMO-2 propargylamide (PA). The probe could be activated to capture SENPs upon photo-irradiation not only in vitro but also in intact cells, providing opportunities to further perform intracellular time-resolved proteome-wide profiling of SUMO-related enzymes.

Fabrication of near infrared light responsive photoelectrochemical immunosensor for in vivo detection of melanoma cells.

Effective and convenient detection of melanoma cells with high sensitivity is essential to identify malignant melanoma in its early stage. However, the existing detection methods, such as immunohistochemical analysis, are too complicated and time-consuming to realize the convenient in vivo and in situ detection. Herein, a near infrared responsive photoelectrochemical (PEC) immunosensor is proposed with plasmonic Au nanoparticles-photonic TiO2 nanocaves (Au/TiO2 NCs) as photon harvest and conversion transducer and antibody as cell recognition unit. The micro-antibody/Au/TiO2 NCs photoelectrode can easily in vivo distinguish melanoma cells and can realize sensitive detection of melanoma cells in short time of 1 min with a lowest limit of detection of 2 cell mL-1. The PEC immunosensor strategy not only allows us to pioneeringly implement sensitive in vivo bio-detection, but also opens up a new avenue for rational design of cell recognition units and micro-electrode for universal and reliable bio-detections.

Selective Photodynamic Activity of Tetrakis(4-aminophenyl)porphyrins with and without Acetyl Protecting Groups on Cancer and Normal Cells.

Tetrakis(4-aminophenyl)porphyrin (1) and tetrakis(4-acetamidophenyl)porphyrin (2) were dissolved in water with the incorporation of a polysaccharide (λ-carrageenan (CGN)) as a water-solubilizing agent. Although the photodynamic activity of the CGN-2 complex was considerably lower than that of the CGN-1 complex, the selectivity index (SI; IC50 in a normal cell/IC50 in a cancer cell) of the CGN-2 complex was considerably higher than that of the CGN-1 complex. This is because the photodynamic activity of the CGN-2 complex was significantly affected by the intracellular uptakes by the normal and cancer cells. During in vivo experiments, the CGN-2 complex inhibited tumor growth under light irradiation with high blood retention compared with the CGN-1 complex and Photofrin, which exhibited lower blood retention. This study showed that the photodynamic activity and SI are influenced by substituent groups of arene in the meso-positions of porphyrin analogs.

Photo-Uncaging by C(sp3)-C(sp3) Bond Cleavage Restores ß-Lapachone Activity.

ß-Lapachone is an ortho-naphthoquinone natural product with significant antiproliferative activity but suffers from adverse systemic toxicity. The use of photoremovable protecting groups to covalently inactivate a substrate and then enable controllable release with light in a spatiotemporal manner is an attractive prodrug strategy to limit toxicity. However, visible light-activatable photocages are nearly exclusively enabled by linkages to nucleophilic functional sites such as alcohols, amines, thiols, phosphates, and sulfonates. Herein, we report covalent inactivation of the electrophilic quinone moiety of ß-lapachone via a C(sp3)-C(sp3) bond to a coumarin photocage. In contrast to ß-lapachone, the designed prodrug remained intact in human whole blood and did not induce methemoglobinemia in the dark. Under light activation, the C-C bond cleaves to release the active quinone, recovering its biological activity when evaluated against the enzyme NQO1 and human cancer cells. Investigations into this report of a C(sp3)-C(sp3) photoinduced bond cleavage suggest a nontraditional, radical-based mechanism of release beginning with an initial charge-transfer excited state. Additionally, caging and release of the isomeric para-quinone, α-lapachone, are demonstrated. As such, we describe a photocaging strategy for the pair of quinones and report a unique light-induced cleavage of a C-C bond. We envision that this photocage strategy can be extended to quinones beyond ß- and α-lapachone, thus expanding the chemical toolbox of photocaged compounds.

Sunlight-directed fluorophore-switch in photosynthesis of cyanine subcellular organelle markers for bio-imaging.

The photoconvertible fluorophore synthesis enables the light controlled imaging channels switch for accurate tracking the quantity and localization of intracellular biomolecules in chemical biology. Herein, we repurposed the photochemistry of Fischer's base and developed a sunlight-directed fluorophore-switch strategy for high-efficiency trimethine cyanine (Cy3.5/Cy3) synthesis. The unexpected sunlight-directed photoconversion of Fischer's base proceeds in conventional solvents and accelerates in chloroform via photo-oxidation and hydrogen atom transfer without using extra additives, and the heterogenous dimerization mechanism was proposed and confirmed by isolation of the reactive intermediates. The reliable strategy is employed in the photosynthesis of commercially available cytomembrane marker (DiI) and other cyanine based organelle markers with appreciable yields. Sunlight-controlled fluorophore-switch of subcellular organelle markers in living cells validated the feasibility of our strategy with cell-tolerant character. Moreover, remote control synthesis of Cy3.5 in vivo directed via sunlight further demonstrated the extended application of our strategy. Therefore, this sunlight-directed strategy will facilitate exploitation of cyanine-based probes with switched fluorescence imaging channels and further enable precise description of the dynamic variations in living cells with minimal autofluorescence and cellular disturbance.

Spatially-Encoding Hydrogels With DNA to Control Cell Signaling.

Patterning biomolecules in synthetic hydrogels offers routes to visualize and learn how spatially-encoded cues modulate cell behavior (e.g., proliferation, differentiation, migration, and apoptosis). However, investigating the role of multiple, spatially defined biochemical cues within a single hydrogel matrix remains challenging because of the limited number of orthogonal bioconjugation reactions available for patterning. Herein, a method to pattern multiple oligonucleotide sequences in hydrogels using thiol-yne photochemistry is introduced. Rapid hydrogel photopatterning of hydrogels with micron resolution DNA features (≈1.5 µm) and control over DNA density are achieved over centimeter-scale areas using mask-free digital photolithography. Sequence-specific DNA interactions are then used to reversibly tether biomolecules to patterned regions, demonstrating chemical control over individual patterned domains. Last, localized cell signaling is shown using patterned protein-DNA conjugates to selectively activate cells on patterned areas. Overall, this work introduces a synthetic method to achieve multiplexed micron resolution patterns of biomolecules onto hydrogel scaffolds, providing a platform to study complex spatially-encoded cellular signaling environments.

Review on the Discovery of Water Absorbance Spectral Pattern in Aquaphotomics based on Chemometrics Analytical Tools.

Aquaphotomics, as a new discipline is a powerful tool for exploring the relationship between the structure of water and the function of matter by analyzing the interaction between water and light of various frequencies. However, chemometric tools, especially the Water Absorbance Spectral Pattern (WASP) determinations, are essential in this kind of data mining. In this review, different state-of-the-art chemometrics methods were introduced to determine the WASP of aqueous systems. We elucidate the methods used for identifying activated water bands in three aspects, namely: 1) improving spectral resolution; the complexity of water species in aqueous systems leads to a serious overlap of NIR spectral signals, therefore, we need to obtain reliable information hidden in spectra, 2) extracting spectral features; sometimes, certain spectral information cannot be revealed by simple data processing, it is necessary to extract deep data information, 3) overlapping peak separation; since the spectral signal is produced by multiple factors, overlapping peak separation can be used to facilitate the extraction of spectral components. The combined use of various methods can characterize the changes of different water species in the system with disturbance and can determine the WASP. WASPs of research systems vary from each other, and it is visually displayed in the form of the aquagram. As a new omics family member, aquaphotomics could be applied as a holistic marker in multidisciplinary fields.

Fluorous Liquids for Magnetic Resonance-Based Thermometry with Enhanced Responsiveness and Environmental Degradation.

Accurate temperature measurement via magnetic resonance is valuable for both in vitro and in vivo analysis of local tissue for evaluating disease pathology and medical interventions. 1H MRI-based thermometry is used clinically but is susceptible to error from magnetic field drift and low sensitivity in fatty tissue and requires a reference for absolute temperature determination. As an alternative, perfluorotributylamine (PFTBA), a perfluorocarbon liquid for 19F MRI thermometry, is based on chemical shift responsiveness and approaches the sensitivity of 1H MRI thermometry agents; however, environmental persistence, greenhouse gas concerns, and multiple resonances which can lead to MRI artifacts indicate a need for alternative sensors. Using a 19F NMR-based structure-property study of synthetic organofluorine molecules, this research develops new organofluorine liquids with improved temperature responsiveness, high signal, and reduced nonmagnetically equivalent fluorine resonances. Environmental degradation analysis using reverse-phase HPLC and quantitative 19F NMR demonstrates a rapid degradation profile mediated via the aryl fluorine core of temperature sensors. Our findings show that our lead liquid temperature sensor, DD-1, can be made in high yield in a single step and possesses an improved responsiveness over our prior work and an 83% increase in aqueous thermal responsiveness over PFTBA. Degradation studies indicate robust degradation with half-lives of less than two hours under photolysis conditions for the parent compound and formation of other fluorinated products. The improved performance of DD-1 and its susceptibility to environmental degradation highlight a new lead fluorous liquid for thermometry applications.

Superlattice Nanofilm on a Touchscreen for Photoexcited Bacteria and Virus Killing by Tuning Electronic Defects in the Heterointerface.

Currently, the global COVID-19 pandemic has significantly increased the public attention toward the spread of pathogenic viruses and bacteria on various high-frequency touch surfaces. Developing a self-disinfecting coating on a touchscreen is an urgent and meaningful task. Superlattice materials are among the most promising photocatalysts owing to their efficient charge transfer in abundant heterointerfaces. However, excess electronic defects at the heterointerfaces result in the loss of substantial amounts of photogenerated charge carrier. In this study, a ZnOFe2 O3 superlattice nanofilm is designed via atomic layer deposition for photocatalytic bactericidal and virucidal touchscreen. Additionally, electronic defects in the superlattice heterointerface are engineered. Photogenerated electrons and holes will be rapidly separated and transferred into ZnO and Fe2 O3 across the heterointerfaces owing to the formation of ZnO, FeO, and ZnFe covalent bonds at the heterointerfaces, where ZnO and Fe2 O3 function as electronic donors and receptors, respectively. The high generation capacity of reactive oxygen species results in a high antibacterial and antiviral efficacy (>90%) even against drug-resistant bacteria and H1N1 viruses under simulated solar or low-power LED light irradiation. Meanwhile, this superlattice nanofilm on a touchscreen shows excellent light transmission (>90%), abrasion resistance (106 times the round-trip friction), and biocompatibility.

Light-Induced Bipolar Photoresponse with Amplified Photocurrents in an Electrolyte-Assisted Bipolar p-n Junction.

The p-n junction with bipolar characteristics sets the fundamental unit to build electronics while its unique rectification behavior constrains the degree of carrier tunability for expanded functionalities. Herein, a bipolar-junction photoelectrode employed with a gallium nitride (GaN) p-n homojunction nanowire array that operates in electrolyte is reported, demonstrating bipolar photoresponse controlled by different wavelengths of light. Significantly, with rational decoration of a ruthenium oxides (RuOx ) layer on nanowires guided by theoretical modeling, the resulting RuOx /p-n GaN photoelectrode exhibits unambiguously boosted bipolar photoresponse by an enhancement of 775% and 3000% for positive and negative photocurrents, respectively, compared to the pristine nanowires. The loading of the RuOx layer on nanowire surface optimizes surface band bending, which facilitates charge transfer across the GaN/electrolyte interface, meanwhile promoting the efficiency of redox reaction for both hydrogen evolution reaction and oxygen evolution reaction which corresponds to the negative and positive photocurrents, respectively. Finally, a dual-channel optical communication system incorporated with such photoelectrode is constructed with using only one photoelectrode to decode dual-band signals with encrypted property. The proposed bipolar device architecture presents a viable route to manipulate the carrier dynamics for the development of a plethora of multifunctional optoelectronic devices for future sensing, communication, and imaging systems.

Reverse Engineering Caged Compounds: Design Principles for their Application in Biology.

Light passes through biological tissue, and so it is used for imaging biological processes in situ. Such observation is part of the very essence of science, but mechanistic understanding requires intervention. For more than 50 years a "second function" for light has emerged; namely, that of photochemical control. Caged compounds are biologically inert signaling molecules that are activated by light. These optical probes enable external instruction of biological processes by stimulation of an individual element in complex signaling cascades in its native environment. Cause and effect are linked directly in spatial, temporal, and frequency domains in a quantitative manner by their use. I provide a guide to the basic properties required to make effective caged compounds for the biological sciences.

Photocatalytic Oxidation for Volatile Organic Compounds Elimination: From Fundamental Research to Practical Applications.

Photocatalysis is regarded as one of the most promising technologies for indoor volatile organic compounds (VOCs) elimination due to its low cost, safe operation, energy efficiency, and high mineralization efficiency under ambient conditions. However, the practical applications of this technology are limited, despite considerable research efforts in recent decades. Until now, most of the works were carried out in the laboratory and focused on exploring new catalytic materials. Only a few works involved the immobilization of catalysts and the design of reactors for practical applications. Therefore, this review systematically summarizes the research and development on photocatalytic oxidation (PCO) of VOCs, with emphasis on recent catalyst's immobilization and reactor designs in detail. First, different types of photocatalytic materials and the mechanisms for PCO of VOCs are briefly discussed. Then, both the catalyst's immobilization techniques and reactor designs are reviewed in detail. Finally, the existing challenges and future perspectives for PCO of VOCs are proposed. This work aims to provide updated information and research inspirations for the commercialization of this technology in the future.