Aloe vera mucilage loaded gelatin electrospun fibers contained in polylactic acid coaxial system and polylactic acid and poly(e-caprolactone) tri-layer membranes for tissue engineering.

BACKGROUND: Polymeric electrospun mats have been used as scaffolds in tissue engineering for the development of novel materials due to its characteristics. The usage of synthetic materials has gone in decline due to environmental problems associated with their synthesis and waste disposal. Biomaterials such as biopolymers have been used recently due to good compatibility on biological applications and sustainability. OBJECTIVE: The purpose of this work is to obtain novel materials based on synthetic and natural polymers for applications on tissue engineering. METHODS: Aloe vera mucilage was obtained, chemically characterized, and used as an active compound contained in electrospun mats. Polymeric scaffolds were obtained in single, coaxial and tri-layer structures, characterized and evaluated in cell culture. RESULTS: Mucilage loaded electrospun fibers showed good compatibility due to formation of hydrogen bonds between polymers and biomolecules from its structure, evidenced by FTIR spectra and thermal properties. Cell viability test showed that most of the obtained mats result on viability higher than 75%, resulting in nontoxic materials, ready to be used on scaffolding applications. CONCLUSION: Mucilage containing fibers resulted on materials with potential use on scaffolding applications due to their mechanical performance and cell viability results.

Hard Gelatin Capsules with Alginate-Hypromellose Microparticles as a Multicompartment Drug Delivery System for Sustained Posaconazole Release.

Microparticles as a multicompartment drug delivery system are beneficial for poorly soluble drugs. Mucoadhesive polymers applied in microparticle technology prolong the contact of the drug with the mucosa surface enhancing drug bioavailability and extending drug activity. Sodium alginate (ALG) and hydroxypropyl methylcellulose (hypromellose, HPMC) are polymers of a natural or semi-synthetic origin, respectively. They are characterized by mucoadhesive properties and are applied in microparticle technology. Spray drying is a technology employed in microparticle preparation, consisting of the atomization of liquid in a stream of gas. In this study, the pharmaceutical properties of spray-dried ALG/HPMC microparticles with posaconazole were compared with the properties of physical mixtures of powders with equal qualitative and quantitative compositions. Posaconazole (POS) as a relatively novel antifungal was utilized as a model poorly water-soluble drug, and hard gelatin capsules were applied as a reservoir for designed formulations. A release study in 0.1 M HCl showed significantly prolonged POS release from microparticles compared to a mixture of powders. Such a relationship was not followed in simulated vaginal fluid (SVF). Microparticles were also characterized by stronger mucoadhesive properties, an increased swelling ratio, and prolonged residence time compared to physical mixtures of powders. The obtained results indicated that the pharmaceutical properties of hard gelatin capsules filled with microparticles were significantly different from hard gelatin capsules with mixtures of powders.

Mesoporous Silicon with Strontium-Powered Poly(Lactic-Co-Glycolic acid)/Gelatin-Based Dressings Facilitate Skin Tissue Repair.

Purpose: Functional inorganic nanomaterials (NMs) are widely exploited as bioactive materials and drug depots. The lack of a stable form of application of NMs at the site of skin injury, may impede the removal of the debridement, elevate pH, induce tissue toxicity, and limit their use in skin repair. This necessitates the advent of innovative wound dressings that overcome the above limitations. The overarching objective of this study was to exploit strontium-doped mesoporous silicon particles (PSiSr) to impart multifunctionality to poly(lactic-co-glycolic acid)/gelatin (PG)-based fibrous dressings (PG@PSiSr) for excisional wound management. Methods: Mesoporous silicon particles (PSi) and PSiSr were synthesized using a chemo-synthetic approach. Both PSi and PSiSr were incorporated into PG fibers using electrospinning. A series of structure, morphology, pore size distribution, and cumulative pH studies on the PG@PSi and PG@PSiSr membranes were performed. Cytocompatibility, hemocompatibility, transwell migration, scratch wound healing, and delineated angiogenic properties of these composite dressings were tested in vitro. The biocompatibility of composite dressings in vivo was assessed by a subcutaneous implantation model of rats, while their potential for wound healing was discerned by implantation in a full-thickness excisional defect model of rats. Results: The PG@PSiSr membranes can afford the sustained release of silicon ions (Si4+) and strontium ions (Sr2+) for up to 192 h as well as remarkably promote human umbilical vein endothelial cells (HUVECs) and NIH-3T3 fibroblasts migration. The PG@PSiSr membranes also showed better cytocompatibility, hemocompatibility, and significant formation of tubule-like networks of HUVECs in vitro. Moreover, PG@PSiSr membranes also facilitated the infiltration of host cells and promoted the deposition of collagen while reducing the accumulation of inflammatory cells in a subcutaneous implantation model in rats as assessed for up to day 14. Further evaluation of membranes transplanted in a full-thickness excisional wound model in rats showed rapid wound closure (PG@SiSr vs control, 96.1% vs 71.7%), re-epithelialization, and less inflammatory response alongside skin appendages formation (eg, blood vessels, glands, hair follicles, etc.). Conclusion: To sum up, we successfully fabricated PSiSr particles and prepared PG@PSiSr dressings using electrospinning. The PSiSr-mediated release of therapeutic ions, such as Si4+ and Sr2+, may improve the functionality of PLGA/Gel dressings for an effective wound repair, which may also have implications for the other soft tissue repair disciplines.

Yoda1 pretreated BMSC derived exosomes accelerate osteogenesis by activating phospho-ErK signaling via Yoda1-mediated signal transmission.

Segmental bone defects, arising from factors such as trauma, tumor resection, and congenital malformations, present significant clinical challenges that often necessitate complex reconstruction strategies. Hydrogels loaded with multiple osteogenesis-promoting components have emerged as promising tools for bone defect repair. While the osteogenic potential of the Piezo1 agonist Yoda1 has been demonstrated previously, its hydrophobic nature poses challenges for effective loading onto hydrogel matrices.In this study, we address this challenge by employing Yoda1-pretreated bone marrow-derived mesenchymal stem cell (BMSCs) exosomes (Exo-Yoda1) alongside exosomes derived from BMSCs (Exo-MSC). Comparatively, Exo-Yoda1-treated BMSCs exhibited enhanced osteogenic capabilities compared to both control groups and Exo-MSC-treated counterparts. Notably, Exo-Yoda1-treated cells demonstrated similar functionality to Yoda1 itself. Transcriptome analysis revealed activation of osteogenesis-associated signaling pathways, indicating the potential transduction of Yoda1-mediated signals such as ErK, a finding validated in this study. Furthermore, we successfully integrated Exo-Yoda1 into gelatin methacryloyl (GelMA)/methacrylated sodium alginate (SAMA)/ß-tricalcium phosphate (ß-TCP) hydrogels. These Exo-Yoda1-loaded hydrogels demonstrated augmented osteogenesis in subcutaneous ectopic osteogenesis nude mice models and in rat skull bone defect model. In conclusion, our study introduces Exo-Yoda1-loaded GELMA/SAMA/ß-TCP hydrogels as a promising approach to promoting osteogenesis. This innovative strategy holds significant promise for future widespread clinical applications in the realm of bone defect reconstruction.

Bone Morphogenetic Protein 7-Loaded Gelatin Methacrylate/Oxidized Sodium Alginate/Nano-Hydroxyapatite Composite Hydrogel for Bone Tissue Engineering.

Background: Bone tissue engineering (BTE) is a promising alternative to autologous bone grafting for the clinical treatment of bone defects, and inorganic/organic composite hydrogels as BTE scaffolds are a hot spot in current research. The construction of nano-hydroxyapatite/gelatin methacrylate/oxidized sodium alginate (nHAP/GelMA/OSA), abbreviated as HGO, composite hydrogels loaded with bone morphogenetic protein 7 (BMP7) will provide a suitable 3D microenvironment to promote cell aggregation, proliferation, and differentiation, thus facilitating bone repair and regeneration. Methods: Dually-crosslinked hydrogels were fabricated by combining GelMA and OSA, while HGO hydrogels were formulated by incorporating varying amounts of nHAP. The hydrogels were physically and chemically characterized followed by the assessment of their biocompatibility. BMP7-HGO (BHGO) hydrogels were fabricated by incorporating suitable concentrations of BMP7 into HGO hydrogels. The osteogenic potential of BHGO hydrogels was then validated through in vitro experiments and using rat femoral defect models. Results: The addition of nHAP significantly improved the physical properties of the hydrogel, and the composite hydrogel with 10% nHAP demonstrated the best overall performance among all groups. The selected concentration of HGO hydrogel served as a carrier for BMP7 loading and was evaluated for its osteogenic potential both in vivo and in vitro. The BHGO hydrogel demonstrated superior in vitro osteogenic induction and in vivo potential for repairing bone tissue compared to the outcomes observed in the blank control, BMP7, and HGO groups. Conclusion: Using hydrogel containing 10% HGO appears promising for bone tissue engineering scaffolds, especially when loaded with BMP7 to boost its osteogenic potential. However, further investigation is needed to optimize the GelMA, OSA, and nHAP ratios, along with the BMP7 concentration, to maximize the osteogenic potential.

Multifunctional Porous Bilayer Artificial Skin for Enhanced Wound Healing.

Meeting the exacting demands of wound healing encompasses rapid coagulation, superior exudate absorption, high antibacterial efficacy, and imperative support for cell growth. In this study, by emulating the intricate structure of natural skin, we prepare a multifunctional porous bilayer artificial skin to address these critical requirements. The bottom layer, mimicking the dermis, is crafted through freeze-drying a gel network comprising carboxymethyl chitosan (CMCs) and gelatin (GL), while the top layer, emulating the epidermis, is prepared via electrospinning poly(l-lactic acid) (PLLA) nanofibers. With protocatechuic aldehyde and gallium ion complexation (PA@Ga) as cross-linking agents, the bottom PA@Ga-CMCs/GL layer featured an adjustable pore size (78-138 µm), high hemostatic performance (67s), and excellent bacterial inhibition rate (99.9%), complemented by an impressive liquid-absorbing capacity (2000% swelling rate). The top PLLA layer, with dense micronanostructure and hydrophobic properties, worked as a shield to effectively thwarted liquid or bacterial penetration. Furthermore, accelerated wound closure, reduced inflammatory responses, and enhanced formation of hair follicles and blood vessels are achieved by the porous artificial skin covered on the surface of wound. Bilayer artificial skin integrates the advantages of nanofibers and freeze-drying porous materials to effectively replicate the protective properties of the epidermal layer of the skin, as well as the cell migration and tissue regeneration of the dermis. This bioabsorbable artificial skin demonstrates structural and functional comparability to real skin, which would advance the field of wound care through its multifaceted capabilities.

Biodegradable Microembolics with Nanografted Polyanions Enable High-Efficiency Drug Loading and Sustained Deep-Tumor Drug Penetration for Locoregional Chemoembolization Treatment.

Transarterial chemoembolization (TACE), the mainstay treatment of unresectable primary liver cancer that primarily employs nondegradable drug-loaded embolic agents to achieve synergistic vascular embolization and locoregional chemotherapy effects, suffers from an inferior drug burst behavior lacking long-term drug release controllability that severely limits the TACE efficacy. Here we developed gelatin-based drug-eluting microembolics grafted with nanosized poly(acrylic acid) serving as a biodegradable ion-exchange platform that leverages a counterion condensation effect to achieve high-efficiency electrostatic drug loading with electropositive drugs such as doxorubicin (i.e., drug loading capacity >34 mg/mL, encapsulation efficiency >98%, and loading time <10 min) and an enzymatic surface-erosion degradation pattern (∼2 months) to offer sustained locoregional pharmacokinetics with long-lasting deep-tumor retention capability for TACE treatment. The microembolics demonstrated facile microcatheter deliverability in a healthy porcine liver embolization model, superior tumor-killing capacity in a rabbit VX2 liver cancer embolization model, and stabilized extravascular drug penetration depth (>3 mm for 3 months) in a rabbit ear embolization model. Importantly, the microembolics finally exhibited vessel remodeling-induced permanent embolization with minimal inflammation responses after complete degradation. Such a biodegradable ion-exchange drug carrier provides an effective and versatile strategy for enhancing long-term therapeutic responses of various local chemotherapy treatments.

Utilization of ripe coconut water in the development of probiotic gelatin.

Background: Desserts with vegetable ingredients are a constantly expanding global market due to the search for alternatives to cow's milk. Fermentation of these matrices by lactic acid bacteria can add greater functionality to the product, improving its nutritional, sensory, and food safety characteristics, as well as creating bioactive components with beneficial effects on health. Concern for health and well-being has aroused interest in byproducts of the industry that have functional properties for the body, such as mature coconut water, a normally discarded residue that is rich in nutrients. This study aimed to develop a probiotic gelatin based on pulp and water from mature coconuts and evaluate the physicochemical characteristics, viability of the Lacticaseibacillus rhamnosus LR32 strain in the medium, as well as the texture properties of the product. Methods: After collection and cleaning, the physicochemical characterization, mineral analysis, analysis of the total phenolic content and antioxidant activity of mature coconut water were carried out, as well as the centesimal composition of its pulp. Afterwards, the gelling was developed with the addition of modified corn starch, gelatin, sucrose, and probiotic culture, being subjected to acidity analysis, texture profile and cell count, on the first day and every 7 days during 21 days of storage, under refrigeration at 5 °C. An analysis of the centesimal composition was also carried out. Results: The main minerals in coconut water were potassium (1,932.57 mg L-1), sodium (19.57 mg L-1), magnesium (85.13 mg L-1) calcium (279.93 mg L-1) and phosphorus (11.17 mg L- 1), while the pulp had potassium (35.96 g kg-1), sodium (0.97 g kg-1), magnesium (2.18 g kg-1), 37 calcium (1.64 g kg-1), and phosphorus (3.32 g kg-1). The phenolic content of the water and pulp was 5.72 and 9.77 mg gallic acid equivalent (GAE) 100 g-1, respectively, and the antioxidant capacity was 1.67 and 0.98 39 g of 2, 2-diphenyl-1-picrylhydrazyl (DPPH) mg-1, respectively. The coconut pulp had 2.81 g 100 g-1of protein, 1.11 g 100 g-1 of 40 ash, 53% moisture, and 5.81 g 100 g-1 of carbohydrates. The gelatin produced during the storage period presented firmness parameters ranging from 145.82 to 206.81 grams-force (gf), adhesiveness from 692.85 to 1,028.63 gf sec, cohesiveness from 0.604 to 0.473, elasticity from 0.901 to 0.881, gumminess from 86.27 to 97.87 gf, and chewiness from 77.72 to 91.98 gf. Regarding the viability of the probiotic microorganism, the dessert had 7.49 log CFU g-1 that remained viable during the 21-day storage, reaching 8.51 CFU g-1. Acidity ranged from 0.15 to 0.64 g of lactic acid 100 g-1. The centesimal composition of the product showed 4.88 g 100 g-1 of protein, 0.54 g 100 g-1 of ash, 85.21% moisture, and 5.37g 100 g-1 of carbohydrates. The development of the gelatin made it possible to obtain a differentiated product, contributing to diversification in the food sector, providing a viable alternative for maintaining consumer health and reducing costs compared to desserts already available on the market.

Enhanced chondrogenic potential in GelMA-based 3D cartilage model via Wnt3a surface immobilization.

Cartilage tissue engineering aims to develop functional substitutes for treating cartilage defects and osteoarthritis. Traditional two-dimensional (2D) cell culture systems lack the complexity of native cartilage, leading to the development of 3D regenerative cartilage models. In this study, we developed a 3D model using Gelatin Methacryloyl (GelMA)-based hydrogels seeded with Y201 cells, a bone marrow mesenchymal stem cell line. The model investigated chondrogenic differentiation potential in response to Wnt3a stimulation within the GelMA scaffold and validated using known chondrogenic agonists. Y201 cells demonstrated suitability for the model, with increased proteoglycan content and upregulated chondrogenic marker expression under chondrogenic conditions. Wnt3a enhanced cell proliferation, indicating activation of the Wnt/ß-catenin pathway, which plays a role in cartilage development. GelMA hydrogels provided an optimal scaffold, supporting cell viability and proliferation. The 3D model exhibited consistent responses to chondrogenic agonists, with TGF-ß3 enhancing cartilage-specific extracellular matrix (ECM) production and chondrogenic differentiation. The combination of Wnt3a and TGF-ß3 showed synergistic effects, promoting chondrogenic differentiation and ECM production. This study presents a 3D regenerative cartilage model with potential for investigating cartilage biology, disease mechanisms, and drug screening. The model provides insights into complex cartilage regeneration mechanisms and offers a platform for developing therapeutic approaches for cartilage repair and osteoarthritis treatment.

Coaxial Electrospun Polycaprolactone/Gelatin Nanofiber Membrane Loaded with Salidroside and Cryptotanshinone Synergistically Promotes Vascularization and Osteogenesis.

Background: Salidroside (SAL) is the most effective component of Rhodiola rosea, a traditional Chinese medicine. Cryptotanshinone (CT) is the main fat-soluble extract of Salvia miltiorrhiza, exhibiting considerable potential for application in osteogenesis. Herein, a polycaprolactone/gelatin nanofiber membrane loaded with CT and SAL (PSGC membrane) was successfully fabricated via coaxial electrospinning and characterized. Methods and Results: This membrane capable of sustained and controlled drug release was employed in this study. Co-culturing the membrane with bone marrow mesenchymal stem cells and human umbilical vein endothelial cells revealed excellent biocompatibility and demonstrated osteogenic and angiogenic capabilities. Furthermore, drug release from the PSGC membrane activated the Wnt/ß-catenin signaling pathway and promoted osteogenic differentiation and vascularization. Evaluation of the membrane's vascularization and osteogenic capacities involved transplantation onto a rat's subcutaneous area and assessing rat cranium defects for bone regeneration, respectively. Microcomputed tomography, histological tests, immunohistochemistry, and immunofluorescence staining confirmed the membrane's outstanding angiogenic capacity two weeks post-operation, with a higher incidence of osteogenesis observed in rat cranial defects eight weeks post-surgery. Conclusion: Overall, the SAL- and CT-loaded coaxial electrospun nanofiber membrane synergistically enhances bone repair and regeneration.

Flavor-switchable scaffold for cultured meat with enhanced aromatic properties.

Cultured meat is emerging as a new type of food that can provide animal protein in a sustainable way. Many previous studies employed various types of scaffolds to develop cultured meat with similar properties to slaughtered meat. However, important properties such as flavor were not discussed, even though they determine the quality of food. Flavor characteristics vary dramatically depending on the amount and types of amino acids and sugars that produce volatile compounds through the Maillard reaction upon cooking. In this study, a flavor-switchable scaffold is developed to release meaty flavor compounds only upon cooking temperature mimicking the Maillard reaction of slaughtered meat. By introducing a switchable flavor compound (SFC) into a gelatin-based hydrogel, we fabricate a functional scaffold that can enhance the aromatic properties of cultured meat. The temperature-responsive SFC stably remains in the scaffold during the cell culture period and can be released at the cooking temperature. Surprisingly, cultured meat fabricated with this flavor-switchable scaffold exhibits a flavor pattern similar to that of beef. This research suggests a strategy to develop cultured meat with enhanced sensorial characteristics by developing a functional scaffold which can mimic the natural cooking flavors of conventional meat.

DNA and gelatin-a cool aerogel mix.

A degradable biopolymer is an effective radiative cooling material.

Injective hydrogel loaded with liposomes-encapsulated MY-1 promotes wound healing and increases tensile strength by accelerating fibroblast migration via the PI3K/AKT-Rac1 signaling pathway.

Failed skin wound healing, through delayed wound healing or wound dehiscence, is a global public health issue that imposes significant burdens on individuals and society. Although the application of growth factor is an effective method to improve the pace and quality of wound healing, the clinically approved factors are limited. Parathyroid hormone (PTH) demonstrates promising results in wound healing by promoting collagen deposition and cell migration, but its application is limited by potentially inhibitory effects when administered continuously and locally. Through partially replacing and repeating the amino acid domains of PTH(1-34), we previously designed a novel PTH analog, PTH(3-34)(29-34) or MY-1, and found that it avoided the inhibitory effects of PTH while retaining its positive functions. To evaluate its role in wound healing, MY-1 was encapsulated in liposomes and incorporated into the methacryloyl gelatin (GelMA) hydrogel, through which an injectable nanocomposite hydrogel (GelMA-MY@Lipo, or GML) was developed. In vitro studies revealed that the GML had similar properties in terms of the appearance, microstructure, functional groups, swelling, and degradation capacities as the GelMA hydrogel. In vitro drug release testing showed a relatively more sustainable release of MY-1, which was still detectable in vivo 9 days post-application. When the GML was topically applied to the wound areas of rat models, wound closure as well as tensile strength were improved. Further studies showed that the effects of GML on wound repair and tensile strength were closely related to the promotion of fibroblast migration to the wound area through the controlled release of MY-1. Mechanically, MY-1 enhanced fibroblast migration by activating PI3K/AKT signaling and its downstream molecule, Rac1, by which it increased fibroblast aggregation in the early stage and resulting in denser collagen deposition at a later time. Overall, these findings demonstrated that the nanocomposite hydrogel system promoted skin wound healing and increased tensile strength, thus offering new potential in the treatment of wound healing.

Amiodarone chewable gels as a potential appproach for paediatric congenital cardiopathies treatment: Comparison between animal and vegetal gelling agents.

The difficulty in swallowing is a frequent problem when oral solid dosage forms (conventional tablets or capsules) are administered to paediatric population or patients with dysphagia. An interesting alternative to overcome these problems are non-conventional formulations like chewable gels, commonly known as 'gummies'. Therefore, this work addresses the design, development and characterization of gummies using gelatine and pectin, for the vehiculization of the antiarrhythmic amiodarone (AMIO). Applying a Design of Experiments (DoE) approach, four gelatine (GG1-GG4) and eight pectin formulations (PG1-PG8) were developed. Considering the obtained results for responses during DoE evaluation (i.e., volume, syneresis, hardness, and gumminess), GG3 and PG8 were selected for complete characterization. Water activity, pH, drug content, texture parameters (adhesiveness, springiness, cohesiveness, and fracturability), disintegration time, in vitro dissolution, and microbiological features were evaluated. The obtained results were within the expected values for this type of formulation. The dissolution profiles showed a 94 % - 99 % of the AMIO content released for GG3 and PG8, respectively, so they could be considered suitable as immediate release dosage forms. In conclusion, the chewable gels were successfully developed and characterised, suggesting a potential means to accomplish a final prototype for the improvement of congenital cardiopathies treatment.

Gelatin/EGDE Ultrafine Composite Fibers Reinforced with 3D Spacer Fabric as Bicomponent Scaffolds for Tissue Engineering.

Protein-based ultrafine fibrous scaffolds can mimic the native extracellular matrices (ECMs) with regard to the morphology and chemical composition but suffer from poor mechanical and wet stability. As a result, cells cannot get a true three-dimensional (3D) environment as they find in native ECMs. In this study, an epoxide, ethylene glycol diglycidylether (EGDE), with high reactivity to active hydrogen is introduced to gelatin solution, serving as an effective cross-linker. The gelatin/EGDE 3D-ultrafine (∼500 nm in diameter) fibrous composite scaffolds are made by an ultralow-concentration phase separation technique (ULCPS). The effects of the polymer content and modification conditions on the morphology and wet stability of the constructs are investigated. It is revealed that ultrafine fibers with 3D random orientation could be formed at low concentrations (0.01, 0.05, and 0.1 wt %, respectively). The wet stability of the constructs could be effectively improved by introducing EGDE into the gelatin system. The shrinkage is reduced to merely 2.14% after the modification at 120 °C for 2 h and could be maintained for up to 3 days. In order to improve the compression properties, the same technique is utilized with the presence of a poly(lactic acid) (PLA) spacer fabric to produce a bicomponent scaffold. The mechanical property and cell viability of the bicomponent scaffolds are investigated, and it is found that cells could enter deep inside and orient themselves randomly at the central area of the bicomponent scaffold. The modification and design approach presented in this study has the potential to provide various protein-based ultrafine fibrous biomaterials for a variety of biomedical applications.

Stepwise dual-release microparticles of BMP-4 and SCF in induced pluripotent stem cell spheroids enhance differentiation into hematopoietic stem cells.

Recently, the formation of three-dimensional (3D) cell aggregates known as embryoid bodies (EBs) grown in media supplemented with HSC-specific morphogens has been utilized for the directed differentiation of embryonic stem cells (ESCs) and induced pluripotent stem cells (iPSCs), into clinically relevant hematopoietic stem cells (HSCs). However, delivering growth factors and nutrients have become ineffective in inducing synchronous differentiation of cells due to their 3D conformation. Moreover, irregularly sized EBs often lead to the formation of necrotic cores in larger EBs, impairing differentiation. Here, we developed two gelatin microparticles (GelMPs) with different release patterns and two HSC-related growth factors conjugated to them. Slow and fast releasing GelMPs were conjugated with bone morphogenic factor-4 (BMP-4) and stem cell factor (SCF), respectively. The sequential presentation of BMP-4 and SCF in GelMPs resulted in efficient and effective hematopoietic differentiation, shown by the enhanced gene and protein expression of several mesoderm and HSC-related markers, and the increased concentration of released HSC-related cytokines. In the present study, we were able to generate CD34+, CD133+, and FLT3+ cells with similar cellular and molecular morphology as the naïve HSCs that can produce colony units of different blood cells, in vitro.

Development and Characterization of Quercetin-Loaded Polymeric Liposomes with Gelatin-Poly(ethylene glycol)-Folic Acid Coating to Increase Their Long-Circulating and Anticancer Activity.

Liposomes as drug-delivery systems have been researched and applied in multiple scientific reports and introduced as patented products with interesting therapeutic properties. Despite various advantages, this drug carrier faces major difficulties in its innate stability, cancer cell specificity, and control over the release of hydrophobic drugs, particularly quercetin, a naturally derived drug that carries many desirable characteristics for anticancer treatment. To improve the effectiveness of liposomes to deliver quercetin by tackling and mitigating the mentioned hurdles, we developed a strategy to establish the ability to passively target cancerous cells, as well as to increase the bioavailability of loaded drugs by incorporating poly(ethylene glycol), gelatin, and folic acid moieties to modify the liposomal system's surface. This research developed a chemically synthesized gelatin, poly(ethylene glycol), and folic acid as a single polymer to coat drug-loaded liposome systems. Liposomes were coated with gelatin-poly(ethylene glycol)-folic acid by electrostatic interaction, characterized by their size, morphology, ζ potential, drug loading efficiency, infrared structures, differential scanning calorimetry spectra, and drug-releasing profiles, and then evaluated for their cytotoxicity to MCF-7 breast cancer cells, as well as cellular uptake, analyzed by confocal imaging to further elaborate on the in vitro behavior of the coated liposome. The results indicated an unusual change in size with increased coating materials, followed by increased colloidal stability, ζ potential, and improved cytotoxicity to cancer cells, as shown by the cellular viability test with MCF-7. Cellular uptake also confirmed these results, providing data for the effects of biopolymer coating, while confirming that folic acid can increase the uptake of liposome by cancer cells. In consideration of such results, the modified gelatin-poly(ethylene glycol)-folic acid-coated liposome can be a potential system in delivering the assigned anticancer compound. This modified biopolymer showed excellent properties as a coating material and should be considered for further practical applications in the future.

Carboxymethyl chitosan-methacrylic acid gelatin hydrogel for wound healing and vascular regeneration.

At present, wound dressings in clinical applications are primarily used for superficial skin wounds. However, these dressings have significant limitations, including poor biocompatibility and limited ability to promote wound healing. To address the issue, this study used aldehyde polyethylene glycol as the cross-linking agent to design a carboxymethyl chitosan-methacrylic acid gelatin hydrogel with enhanced biocompatibility, which can promote wound healing and angiogenesis. The CSDG hydrogel exhibits acid sensitivity, with a swelling ratio of up to 300%. Additionally, it exhibited excellent resistance to external stress, withstanding pressures of up to 160 kPa and self-deformation of 80%. Compared to commercially available chitosan wound gels, the CSDG hydrogel demonstrates excellent biocompatibility, antibacterial properties, and hemostatic ability. Bothin vitroandin vivoresults showed that the CSDG hydrogel accelerated blood vessel regeneration by upregulating the expression of CD31, IL-6, FGF, and VEGF, thereby promoting rapid healing of wounds. In conclusion, this study successfully prepared the CSDG hydrogel wound dressings, providing a new approach and method for the development of hydrogel dressings based on natural macromolecules.

The promotion of vascular reconstruction by hierarchical structures in biodegradable small-diameter vascular scaffolds.

Tissue engineering of small-diameter vessels remains challenging due to the inadequate ability to promote endothelialization and infiltration of smooth muscle cells (SMCs). Ideal vascular graft is expected to provide the ability to support endothelial monolayer formation and SMCs infiltration. To achieve this, vascular scaffolds with both orientation and dimension hierarchies were prepared, including hierarchically random vascular scaffold (RVS) and aligned vascular scaffold (AVS), by utilizing degradable poly(ε-caprolactone)-co-poly(ethylene glycol) (PCE) and the blend of PCE/gelatin (PCEG) as raw materials. In addition to the orientation hierarchy, dimension hierarchy with small pores in the inner layer and large pores in the outer layer was also constructed in both RVS and AVS to further investigate the promotion of vascular reconstruction by hierarchical structures in vascular scaffolds. The results show that the AVS with an orientation hierarchy that consists with the natural vascular structure had better mechanical properties and promotion effect on the proliferation of vascular cells than RVS, and also exhibited excellent contact guidance effects on cells. While the dimension hierarchy in both RVS and AVS was favorable to the rapid infiltration of SMCs in a short culture time in vitro. Besides, the results of subcutaneous implantation further demonstrate that AVS achieved a fully infiltrated outer layer with wavy elastic fibers-mimic strips formation by day 14, ascribing to hierarchies of aligned orientation and porous dimension. The results further indicate that the scaffolds with both orientation and dimension hierarchical structures have great potential in the application of promoting the vascular reconstruction.

Multifunctional Molybdenum-Based Nanoclusters Engineered Gelatin Methacryloyl as In Situ Photo-Cross-Linkable Hybrid Hydrogel Dressings for Enhanced Wound Healing.

Skin injuries and wounds present significant clinical challenges, necessitating the development of advanced wound dressings for efficient wound healing and tissue regeneration. In this context, the advancement of hydrogels capable of counteracting the adverse effects arising from undesirable reactive oxygen species (ROS) is of significant importance. This study introduces a hybrid hydrogel with rapid photocuring and excellent conformability, tailored to ameliorate the hostile microenvironment of damaged skin tissues. The hybrid hydrogel, composed of photoresponsive Gelatin Methacryloyl (GelMA) and Molybdenum-based nanoclusters (MNC), exhibits physicochemical characteristics conductive to skin regeneration. In vitro studies demonstrated the cytocompatibility and ROS-responsive behavior of the MNC/GelMA hybrid hydrogels, confirming their ability to promote human dermal fibroblasts (HDF) functions. The incorporation of MNC into GelMA not only enhances HDF adhesion, proliferation, and migration but also shields against oxidative damage induced by hydrogen peroxide (H2O2). Notably, in vivo evaluation in murine full-thickness skin defects revealed that the application of hybrid hydrogel dressings led to reduced inflammation, accelerated wound closure, and enhanced collagen deposition in comparison to control groups. Significantly, this study introduced a convenient approach to develop in situ ROS-scavenging hydrogel dressings to accelerate the wound healing process without the need for exogenous cytokines or medications. We consider that the nanoengineering approach proposed herein offers potential possibilities for the development of therapeutic hydrogel dressings addressing various skin-related conditions.