Degradation of gaseous hydrocarbons in aerated stirred bioreactors inoculated with Rhodococcus erythropolis: Effect of the carbon source and SIFT-MS method development.

The study of microbial hydrocarbons removal is of great importance for the development of future bioremediation strategies. In this study, we evaluated the removal of a gaseous mixture containing toluene, m-xylene, ethylbenzene, cyclohexane, butane, pentane, hexane and heptane in aerated stirred bioreactors inoculated with Rhodococcus erythropolis and operated under non-sterile conditions. For the real-time measurement of hydrocarbons, a novel systematic approach was implemented using Selected-Ion Flow Tube Mass Spectrometry (SIFT-MS). The effect of the carbon source (∼9.5 ppmv) on (i) the bioreactors' performance (BR1: dosed with only cyclohexane as a single hydrocarbon versus BR2: dosed with a mixture of the 8 hydrocarbons) and (ii) the evolution of microbial communities over time were investigated. The results showed that cyclohexane reached a maximum removal efficiency (RE) of 53% ± 4% in BR1. In BR2, almost complete removal of toluene, m-xylene and ethylbenzene, being the most water-soluble and easy-to-degrade carbon sources, was observed. REs below 32% were obtained for the remaining compounds. By exposing the microbial consortium to only the five most recalcitrant hydrocarbons, REs between 45% ± 5% and 98% ± 1% were reached. In addition, we observed that airborne microorganisms populated the bioreactors and that the type of carbon source influenced the microbial communities developed. The abundance of species belonging to the genus Rhodococcus was below 10% in all bioreactors at the end of the experiments. This work provides fundamental insights to understand the complex behavior of gaseous hydrocarbon mixtures in bioreactors, along with a systematic approach for the development of SIFT-MS methods.

Circular economy life cycle cost for kerbside waste material looping process.

Rapid expansion in urban areas has engendered a superfluity of municipal solid waste (MSW) stemming from contemporary civilization, encompassing commercial sectors and human undertakings. Kerbside waste, a type of MSW, has the potential for recycling and reuse at the end of its first life cycle, but is often limited to a linear cycle. This study aimed to assess the life cycle costs of different separation and recycling methods for handling kerbside waste. A new life cycle cost model, drawing from the circular economy's value retention process (VRP) model, has been created and applied to assess the continuous recycling of kerbside glass. The study investigates two key separation techniques, kerbside recycling mixed bin recycling (KRMB) kerbside glass recycling separate bin (KGRSB) and analyses their impact on the life cycle cost of the recycling process. Additionally, the research explores two approaches of recycling and downcycling: closed-loop recycling, which pertains to the recycling of glass containers, and open-looped recycling, which involves the use of recycled glass in asphalt. The results showed when use annually collected waste as the functional unit, the KRMB model incurred lower costs compared to the KGRSB model due to its lower production output. However, when evaluated over a 1-ton production of glass container and asphalt, the KGRSB method demonstrated superior cost performance with a 40-50% reduction compared to the KRMB method. The open-loop recycling method (asphalt) incurred a higher cost compared to the closed-loop recycling method due to its larger production volume over a 21-year period.

Exploring the Effect of Arsenic-Containing Hydrocarbon on the Bidirectional Synaptic Plasticity of the Dorsal Hippocampus.

Arsenic-containing hydrocarbons (AsHCs) are common in marine organisms. However, there is little research on their effects on the central nervous system's advanced activities, such as cognition. Bidirectional synaptic plasticity dynamically regulates cognition through the balance of long-term potentiation (LTP) and long-term depression (LTD). However, the effects of AsHCs on bidirectional synaptic plasticity and the underlying molecular mechanisms remain unexplored. This study provides the first evidence that 15 µg As L-1 AsHC 360 enhances bidirectional synaptic plasticity, occurring during the maintenance phase rather than the baseline phase. Further calcium gradient experiments hypothesize that AsHC 360 may enhance bidirectional synaptic plasticity by affecting calcium ion levels. The enhancement of bidirectional synaptic plasticity by 15 µg As L-1 AsHC 360 holds significant implications in improving cognitive function, treating neuro-psychiatric disorders, promoting neural recovery, and enhancing brain adaptability.

Genetically modified indigenous Pseudomonas aeruginosa drove bacterial community to change positively toward microbial enhanced oil recovery applications.

AIMS: Microbial enhanced oil recovery (MEOR) is cost-effective and eco-friendly for oil exploitation. Genetically modified biosurfactants-producing high-yield strains are promising for ex-situ MEOR. However, can they survive and produce biosurfactants in petroleum reservoirs for in-situ MEOR? What is their effect on the native bacterial community? METHODS AND RESULTS: A genetically modified indigenous biosurfactants-producing strain Pseudomonas aeruginosa PrhlAB was bioaugmented in simulated reservoir environments. Pseudomonas aeruginosa PrhlAB could stably colonize in simulated reservoirs. Biosurfactants (200 mg l-1) were produced in simulated reservoirs after bio-augmenting strain PrhlAB. The surface tension of fluid was reduced to 32.1 mN m-1. Crude oil was emulsified with an emulsification index of 60.1%. Bio-augmenting strain PrhlAB stimulated the MEOR-related microbial activities. Hydrocarbon-degrading bacteria and biosurfactants-producing bacteria were activated, while the hydrogen sulfide-producing bacteria were inhibited. Bio-augmenting P. aeruginosa PrhlAB reduced the diversity of bacterial community, and gradually simplified the species composition. Bacteria with oil displacement potential became dominant genera, such as Shewanella, Pseudomonas, and Arcobacter. CONCLUSIONS: Culture-based and sequence-based analyses reveal that genetically modified biosurfactants-producing strain P. aeruginosa PrhlAB are promising for in-situ MEOR as well.

Microbial anabolic and catabolic utilization of hydrocarbons in deep subseafloor sediments of Guaymas Basin.

Guaymas Basin, located in the Gulf of California, is a hydrothermally active marginal basin. Due to steep geothermal gradients and localized heating by sill intrusions, microbial substrates like short-chain fatty acids and hydrocarbons are abiotically produced from sedimentary organic matter at comparatively shallow depths. We analyzed the effect of hydrocarbons on uptake of hydrocarbons by microorganisms via nano-scale secondary ion mass spectrometry (NanoSIMS) and microbial sulfate reduction rates (SRR), using samples from two drill sites sampled by IODP Expedition 385 (U1545C and U1546D). These sites are in close proximity of each other (ca. 1 km) and have very similar sedimentology. Site U1546D experienced the intrusion of a sill that has since then thermally equilibrated with the surrounding sediment. Both sites currently have an identical geothermal gradient, despite their different thermal history. The localized heating by the sill led to thermal cracking of sedimentary organic matter and formation of potentially bioavailable organic substrates. There were low levels of hydrocarbon and nitrogen uptake in some samples from both sites, mostly in surficial samples. Hydrocarbon and methane additions stimulated SRR in near-seafloor samples from Site U1545C, while samples from Site U1546D reacted positively only on methane. Our data indicate the potential of microorganisms to metabolize hydrocarbons even in the deep subsurface of Guaymas Basin.

Cuticular hydrocarbon profiles reveal geographic chemotypes in stingless bees (Hymenoptera: Meliponini).

Cuticular hydrocarbon (CHCs) variation has been detected in various insect taxa, but the potential contribution of cuticular compounds for analyzing intraspecific diversity at the population level has been little explored. Here we assess for the first time intraspecific variation in the CHC profile of stingless bees, using the species Melipona beecheii and Nannotrigona perilampoides. The objective is determining whether intraspecific variation can be useful for population identification. We found species-specific chemical patterns and extensive variation within each species. Notably, chemotypes were significantly associated to geographic origin in N. perilampoides but less so in M. beecheii and we discuss possible explanations for these patterns. Our results support the use of CHCs in conjunction with other methods in emerging problems such as undetected colony mobilization across regions. As CHCs are involved in several aspects of stingless bee recognition and interactions, it would be essential to unravel how these chemical signatures evolve across populations.

Low-vacuum SEM imaging and viability test of L929 cells exposed to a Euro 6 diesel exhaust gas mixture in a BAT-CELL chamber in comparison with hydrocarbons emission.

Exhaust emissions, which count among the most common causes of premature death worldwide, can cause irreversible changes in cells, leading to their damage or degeneration. In this research, L929 line cells were observed after exposure in the BAT-CELL chamber to exhaust gases emitted from a Euro 6 compression-ignition engine. Real road traffic conditions were simulated, taking into account air resistance while driving at speeds of 50 km/h, 120 km/h and idling engine. Morphological analysis of the cells was performed using an environmental scanning electron microscope. It has been observed that diesel exhaust fumes can cause inflammation, which can induce apoptosis or leads to necrotic cell death. The impact of the vehicle exhaust gases can inhibit cell proliferation by almost three times. Moreover, a correlation has been observed between the speed of the inflammatory reaction in cells and the presence of specific hydrocarbon compounds that determine the toxicity of exhaust gases. Research has shown that the toxicity of the emitted exhaust gases has been the highest at the driving speed of 120 km/h. In order to reduce the harmful effects of exhaust emissions, ecological alternatives and the supplementation of legal provisions regarding the compounds subject to limitation are necessary.

Review on biochar as a sustainable green resource for the rehabilitation of petroleum hydrocarbon-contaminated soil.

Petroleum pollution is one of the primary threats to the environment and public health. Therefore, it is essential to create new strategies and enhance current ones. The process of biological reclamation, which utilizes a biological agent to eliminate harmful substances from polluted soil, has drawn much interest. Biochars are inexpensive, environmentally beneficial carbon compounds extensively employed to remove petroleum hydrocarbons from the environment. Biochar has demonstrated an excellent capability to remediate soil pollutants because of its abundant supply of the required raw materials, sustainability, affordability, high efficacy, substantial specific surface area, and desired physical-chemical surface characteristics. This paper reviews biochar's methods, effectiveness, and possible toxic effects on the natural environment, amended biochar, and their integration with other remediating materials towards sustainable remediation of petroleum-polluted soil environments. Efforts are being undertaken to enhance the effectiveness of biochar in the hydrocarbon-based rehabilitation approach by altering its characteristics. Additionally, the adsorption, biodegradability, chemical breakdown, and regenerative facets of biochar amendment and combined usage culminated in augmenting the remedial effectiveness. Lastly, several shortcomings of the prevailing methods and prospective directions were provided to overcome the constraints in tailored biochar studies for long-term performance stability and ecological sustainability towards restoring petroleum hydrocarbon adultered soil environments.

Life cycle GHG emissions assessment of vanadium recovery from bitumen-derived petcoke fly ash.

Petcoke generated during bitumen upgrading is a potential source of vanadium for the global market. Recovering vanadium from the fly ash originating from the combustion of petcoke appears to be a suitable route for commercial implementation, given its high extraction rate. Although the technical feasibility of the recovery process has been proven, the environmental impact should be addressed. Information on the greenhouse (GHG) emissions from the process is scarce in the public domain. Therefore, a framework was developed for assessment of life cycle GHG emissions for extraction of vanadium from petcoke-based fly ash. This framework was used to perform a life cycle GHG emissions assessment of a water leaching and salt roasting process to extract vanadium from fly ash. For the upstream GHG emissions, we collected direct emissions data and energy consumption from the literature, and, for the process emissions, we developed a model to estimate energy and material balances based on process conditions. The emission factors for electricity production, fuel combustion, production of consumables, and gas treatment were used to obtain the life cycle GHG emissions. The results show that the life cycle GHG emission of vanadium recovery are 26.6-3.9+0.9 kg CO2eq/kg V2O5; 66% of these are direct GHG emissions. The process GHG emissions from fly ash decarbonization contribute the most to the life cycle GHG emissions. The air-to-fuel ratio for roasting and the GHG emission factors for petcoke combustion and the gas treatment operation are the inputs that most effect the model output. Compared with the production of V2O5 from vanadium titano-magnetite ore and bitumen upgrading spent catalyst, the petcoke fly ash pathway generates about twice the life cycle GHG emissions. This study's results can help determine areas of improvement in the upstream operations and the recovery process to reduce the life cycle GHG emissions to levels that can compete with primary and alternative routes to produce vanadium pentoxide. The results of this study can help in decision-making associated with vanadium extract from fly ash produced from combustion of petcoke.

A formulation for asphalt concrete air void during service life by adopting a hybrid evolutionary polynomial regression and multi-gene genetic programming.

Bitumen, aggregate, and air void (VA) are the three primary ingredients of asphalt concrete. VA changes over time as a function of four factors: traffic loads and repetitions, environmental regimes, compaction, and asphalt mix composition. Due to the high as-constructed VA content of the material, it is expected that VA will reduce over time, causing rutting during initial traffic periods. Eventually, the material will undergo shear flow when it reaches its densest state with optimum aggregate interlock or refusal VA content. Therefore, to ensure the quality of construction, VA in asphalt mixture need to be modeled throughout the service life. This study aims to implement a hybrid evolutionary polynomial regression (EPR) combined with a teaching-learning based optimization (TLBO) algorithm and multi-gene genetic programming (MGGP) to predict the VA percentage of asphalt mixture during the service life. For this purpose, 324 data records of VA were collected from the literature. The variables selected as inputs were original as-constructed VA, VA orig (%); mean annual air temperature, MAAT (°F); original viscosity at 77 °F, η o r i g , 77 (Mega-Poises); and time (months). EPR-TLBO was found to be superior to MGGP and existing empirical models due to the interquartile ranges of absolute error boxes equal to 0.67%. EPR-TLBO had an R2 value of more than 0.90 in both the training and testing phases, and only less than 20% of the records were predicted utilizing this model with more than 20% deviation from the observed values. As determined by the sensitivity analysis, η o r i g , 77 is the most significant of the four input variables, while time is the least one. A parametric study showed that regardless of MAAT , η o r i g , 77 , of 0.3 Mega-Poises, and VA orig above 6% can be ideal for improving the pavement service life. It was also witnessed that with an increase of MAAT from 37 to 75 °F, the serviceability of asphalt concrete takes 15 months less on average.

Dispersant addition, but not nutrients, stimulated blooms of multiple hydrocarbonoclastic genera in nutrient-replete coastal marine surface waters.

The range of impacts of chemical dispersants on indigenous marine microbial communities and their activity remains poorly constrained. We tested the response of nearshore surface waters chronically exposed to oil leakage from a downed platform and supplied with nutrients by the Mississippi River to Corexit dispersant and nutrient additions. As assessed using 14C-labeled tracers, hexadecane mineralization potential was orders of magnitude higher in all unamended samples than in previously assessed bathypelagic communities. Nutrient additions stimulated microbial mortality but did not affect community composition and had no generalizable effect on hydrocarbon mineralization potential. By contrast, Corexit amendments caused a rapid shift in community composition and a drawdown of inorganic nitrogen and orthophosphate though no generalizable effect on hydrocarbon mineralization potential. The hydrocarbonoclastic community's response to dispersants is largely driven by the relative availability of organic substrates and nutrients, underscoring the role of environmental conditions and multiple interacting stressors on hydrocarbon degradation potential.

A multi-step approach: Coupling of biodegradation and UV photocatalytic oxidation TiO2 for the treatment of naphthenic acid fraction compounds in oil sands process-affected water.

Bitumen extraction in Alberta's oil sands region uses large volumes of water, leading to an abundance of oil sands process-affected water (OSPW). OSPW contains naphthenic acid fraction compounds (NAFCs) which have been found to contribute to OSPW toxicity. This study utilized a multistep treatment, coupling biological degradation with UV photocatalytic oxidation, and nutrient addition to boost the native microbial community's degradation capacity. OSPW initially contained 40-42 mg/L NAFCs with a toxicity of 3.8-3.9 TU. Initial biodegradation (Step 1) was used to remove the easily biodegradable NAFCs (11-25% removal), followed by a light or heavy dose of oxidation (Step 2) to breakdown the recalcitrant NAFCs (66-82% removal). Lastly, post-oxidation biodegradation with nutrients (Step 3) removed the residual bioavailable NAFCs (16-31% removal). By the end of the multistep treatment, the final NAFC concentrations and toxicity ranged from 5.3 to 6.8 mg/L and 1.1-1.2 TU. Analysis showed that OPSW was limited in phosphorus (below detection limit), and the addition of nutrients improved the degradation of NAFCs. Two treatments throughout the multistep treatment never received nutrients and showed minimal NAFC degradation post-oxidation. The native microbial community survived the stress from UV photocatalytic oxidation as seen by the post-oxidation NAFC biodegradation. Microbial community diversity was reduced considerably following oxidation, but increased with nutrient addition. The microbial community consisted predominately of Proteobacteria (Gammaproteobacteria and Alphaproteobacteria), and the composition shifted depending on the level of oxidation received. Possible NAFC-degrading microbes identified after a light oxidation dose included Pseudomonas, Acinetobacter and Xanthomonadales, while Xanthobacteracea and Rhodococcus were the dominant microbes after heavy oxidation. This experiment confirms that the microbial community is capable of degrading NAFCs and withstanding oxidative stress, and that degradation is further enhanced with the addition of nutrients.

Beyond methane, new frontiers in anaerobic microbial hydrocarbon utilizing pathways.

Alkanes, single carbon methane to long-chain hydrocarbons (e.g. hexadecane and tetradecane), are important carbon sources to anaerobic microbial communities. In anoxic environments, archaea are known to utilize and produce methane via the methyl-coenzyme M reductase enzyme (MCR). Recent explorations of new environments, like deep sea sediments, that have coupled metagenomics and cultivation experiments revealed divergent MCRs, also referred to as alkyl-coenzyme M reductases (ACRs) in archaea, with similar mechanisms as the C1 utilizing canonical MCR mechanism. These ACR enzymes have been shown to activate other alkanes such as ethane, propane and butane for subsequent degradation. The reversibility of canonical MCRs suggests that these non-methane-activating homologues (ACRs) might have similar reversibility, perhaps mediated by undiscovered lineages that produce alkanes under certain conditions. The discovery of these alternative alkane utilization pathways holds significant promise for a breadth of potential biotechnological applications in bioremediation, energy production and climate change mitigation.

Ecotoxicological risk of asphalt pavements to aquatic animals associated with pollutant leaching.

Contaminants such as heavy metals and polycyclic aromatic hydrocarbons (PAHs) can be released from asphalt pavement and transported through stormwater runoff to nearby water bodies, leading to water pollution and potential harm to living aquatic animals. This study characterizes the heavy metal and PAH leaching from various asphalt paving materials and their potential ecotoxicological effects on zebrafish Danio rerio. Artificial runoffs were prepared in the laboratory concerning the effects of water, temperature, and traffic. The concentrations of heavy metals and PAHs in the leachates were quantified, while the toxicity assessment encompassed mortality, metal stress, PAH toxicity, inflammation, carcinogenicity, and oxidative damage. Gene expressions of related proteins or transcription factors were assessed, including metallothionines, aryl hydrocarbon receptors, interleukin-1ß, interleukin-10, nuclear factor-κB, tumor necrosis factor-α, tumor suppressor p53, heat shock protein 70, and reactive oxygen species (ROS). The findings demonstrate that leachates from asphalt pavements containing waste bottom ash, crumb rubber, or specific chemicals could induce notable stress and inflammation responses in zebrafish. In addition, potential carcinogenic effects and the elevation of ROS were identified within certain treatment groups. This study represents the first attempt to assess the ecotoxicity of pavement leachates employing a live fish model, thereby improving the current understanding of the environmental impact of asphalt pavements.

The MATH test. A three-phase assay?

This study aimed to investigating the possible interference caused by glass test tubes on the quantification of bacterial adhesion to hydrocarbons by the MATH test. The adhesion of four bacteria to hexadecane and to glass test tubes was evaluated employing different suspending polar phases. The role of the ionic strength of the polar phase regarding adhesion to glassware was investigated. Within the conditions studied, Gram-positive bacteria adhered to both the test tube and the hydrocarbon regardless of the polar phase employed; meanwhile, Escherichia coli ATCC 25922 did not attach to either one. The capacity of the studied microorganisms to adhere to glassware was associated with their electron-donor properties. The ionic strength of the suspending media altered the patterns of adhesion to glass in a strain-specific manner by defining the magnitude of electrostatic repulsion observed between bacteria and the glass surface. This research demonstrated that glass test tubes may interact with suspended bacterial cells during the MATH test under specific conditions, which may lead to overestimating the percentage of adhesion to hydrocarbons and, thus, to erroneous values of cell surface hydrophobicity.

Risk assessment of heavy metals and total petroleum hydrocarbons (TPHs) in coastal sediments of commercial and industrial areas of Hormozgan province, Iran.

The significant increase in the pollution of heavy metals and organic pollutants, their stable nature, and their high toxicity are gradually becoming a global crisis. In a recent study, a comprehensive assessment of the spatial distribution of heavy metals and total petroleum hydrocarbons (TPHs), as well as an assessment of their ecological risks in the sediments of 32 stations located in commercial and industrial areas (Mainly focusing on petrochemical and power industries, desalination plants and transit Ports) of Hormozgan province (East and West of Jask, Bandar Abbas, Qeshm, and Bandar Lengeh) was performed during 2021-2022. The sediment samples were digested with HNO3, HCl and HF solvents. The concentration of heavy metals was determined with furnace and flame systems of atomic absorption spectrometer. The concentration of heavy metals showed significant spatial changes between stations. The ecological assessment indices between the regions indicated that the stations located in Shahid Bahonar Port, Suru Beach, and Khor gorsouzuan had a higher intensity of pollution than other places and significant risks of pollution, especially in terms of Cr and Ni. The average contamination degree (CD) (14.89), modified contamination degree (MCD) (2.48), pollution load index (PLI) (2.32), and potential ecological risk index (PERI) (100.30) showed the sediments in the area of Shahid Bahonar Port, Suru beach and Khor gorsouzuan, experience significant to high levels of pollution, especially Cr and Ni. Using contamination factor (CF) and Geoaccumulation index (Igeo), Cr was considered the most dangerous metal in the studied areas. Based on the global classification of marine sediment quality for the concentrations of TPHs, the sediments of the studied stations were classified as non-polluted to low pollution. In all regions, indices of the PELq (General toxicity) and CF (Contamination factor) were much lower than 0.1 and 1 respectively, showing the absence of adverse biological effects caused by TPHs in sediments. It is necessary to consider comprehensive and impressive strategies to control and reduce pollution of heavy metals, especially in the areas of Shahid Bahonar Port, Suru Beach, and Khor gorsouzuan, so that the sources of this pollution are required to be identified and managed.

Pilot-scale field studies on activated microbial remediation of petroleum-contaminated soil.

Soil contamination by petroleum, including crude oil from various sources, is increasingly becoming a pressing global environmental concern, necessitating the exploration of innovative and sustainable remediation strategies. The present field-scale study developed a simple, cost-effective microbial remediation process for treating petroleum-contaminated soil. The soil treatment involves adding microbial activators to stimulate indigenous petroleum-degrading microorganisms, thereby enhancing the total petroleum hydrocarbons (TPH) degradation rate. The formulated microbial activator provided a growth-enhancing complex of nitrogen and phosphorus, trace elements, growth factors, biosurfactants, and soil pH regulators. The field trials, involving two 500 m3 soil samples with the initial TPH content of 5.01% and 2.15%, were reduced to 0.41% and 0.02% in 50 days, respectively, reaching the national standard for cultivated land category II. The treatment period was notably shorter than the commonly used composting and bioaugmentation methods (typically from 8 to 12 weeks). The results indicated that the activator could stimulate the functional microorganisms in the soil and reduce the phytotoxicity of the contaminated soil. After 40 days of treatment, the germination rate of rye seeds increased from 20 to 90%, indicating that the microbial activator could be effectively used for rapid on-site remediation of oil-contaminated soils.

Catalytic flash pyrolysis for recovery of gasoline-range hydrocarbons from electric cable residue using a low-cost natural catalyst: An analytical Py-GC/MS study.

This investigation's novelty and objective reside in exploring catalytic flash pyrolysis of cross-linked polyethylene (XLPE) plastic residue in the presence of kaolin, with the perspective of achieving sustainable production of gasoline-range hydrocarbons. Through proximate analysis, thermogravimetric analysis, and heating value determination, this study also assessed the energy-related characteristics of cross-linked polyethylene plastic residue, revealing its potential as an energy source (44.58 MJ kg-1) and suitable raw material for pyrolysis due to its low ash content and high volatile matter content. To understand the performance as a low-cost catalyst in the flash pyrolysis of cross-linked polyethylene plastic residue, natural kaolin was subjected to characterization through thermogravimetric analysis, X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray fluorescence (XRF). Cross-linked polyethylene plastic residue was subjected to thermal and catalytic pyrolysis in an analytical microreactor coupled to gas chromatography-mass spectrometry (Py-GC/MS system), operating at 500 °C, to characterize the distribution and composition of volatile reaction products. The application of kaolin as a catalyst resulted in a decline of the relative concentration of hydrocarbons in the diesel range (C8-C24) from approximately 87 % to 28 %, and a reduction in lubricating oils (C14-C50) from about 70 % to 13 %, while concomitantly increasing the relative concentration of lighter hydrocarbons in the gasoline range (C8-C12) from around 28 % to 87 %. Therefore, catalytic flash pyrolysis offers the potential for converting this plastic waste into a new and abundant chemical source of gasoline-range hydrocarbons. This process can be deemed viable and sustainable for managing and valorizing cross-linked polyethylene plastic residue.

Bioremediation experiments and dynamic model of petroleum hydrocarbon contaminated soil.

Clarifying the occurrence and morphological characteristics of petroleum hydrocarbons (PHs) in soil can facilitate a comprehensive understanding of their migration and transformation patterns in soil/sediment. Additionally, by establishing the dynamic transformation process of each occurrence state, the ecological impact and environmental risk associated with PHs in soil/sediment can be assessed more precisely. The adsorption experiments and closed static incubation experiments was carried out to explore the PHs degradation and fraction distribution in aged contaminated soil under two remediation scenarios of natural attenuation (NA) and bioaugmentation (BA) by exogenous bacteria through a new sequential extraction method based on Tenax-TA, Hydroxypropyl-ß-cyclodextrin and Rhamnolipid (HPCD/RL), accelerated solvent extractor (ASE) unit and alkaline hydrolysis extraction. The adsorption experiment results illustrated that bioaugmentation could promote the desorption of PHs in the adsorption phase, and the soil-water partition coefficient Kd decreased from 0.153 L/g to 0.092 L/g. The incubation experiment results showed that compared with natural attenuation, bioaugmentation could improve the utilization of PHs in aged soil and promote the generation of non-extractable hydrocarbons. On the 90th day of the experiment, the concentrations of weakly adsorbed hydrocarbons in the natural attenuation and bioaugmentation experimental groups decreased by 46.44% and 87.07%, respectively, while the concentrations of strongly adsorbed hydrocarbons and non-extractable hydrocarbons increased by 77.93%, 182.14%, and 80.91%, and 501.19%, respectively, compared their initial values. We developed a novel dynamic model and inverted the kinetic parameters of the model by the parameter scanning function and the Markov Chain Monte Carlo (MCMC) method based on the Bayesian approach in COMSOL Multiphysics® finite element software combined with experimental data. There was a good linear relationship between experimental interpolation data and model prediction data. The R2 for the concentrations of weakly adsorbed hydrocarbons ranged from 0.9953 to 0.9974, for strongly adsorbed hydrocarbons from 0.9063 to 0.9756, and for non-extractable hydrocarbons from 0.9931 to 0.9982. These extremely high correlation coefficients demonstrate the high accuracy of the parameters calculated using the Bayesian inversion method.