The relationship between the shape of rotator cuff tears and shoulder anatomical parameters.

BACKGROUND: The aim of this study is to investigate the potential relationship between shoulder anatomical parameters and the shape of rotator cuff tears (L-shaped, U-shaped, and crescent-shaped). MATERIALS AND METHODS: The study included 160 (n:160) patients. Patients were divided into four groups: crescent type, u type and L type tears and control group. There were 40 cases in each group. The operated patients were divided into three groups based on the shape of the tears in arthroscopic images. Measurements of Critical Shoulder Angle (CSA), Greater Tuberosity Angle (GTA), Acromion Index (AI), Lateral Acromion Angle (LAA), and Humerus Footprint width (coronal width and sagittal width) were taken in each group and compared. RESULTS: Patients were divided into four different groups: Crescent type group (n:40), L type group (n:40), U type group (n:40) and control group (n:40). Upon assessing the coronal and sagittal width measurements, The mean coranal width measurement of the L-type tear group was 12.62 ± 0.29 mm, which was significantly higher than all other groups (p < 0.05). The mean sagittal width of the L-type tear group was 34.95 ± 0.29 mm, which was significantly higher than all other groups (p < 0.05). When the groups were evaluated based on GTA, CSA, and AI data, the mean GTA measurement of the L-type tear group was 73.03 ± 0.95 degrees, which was significantly higher than all other groups (p < 0.05). The mean CSA measurement of the L-type tear group was 34.77 ± 0.66 degrees, which was significantly higher than all other groups (p < 0.05). The mean AI measurement of the L-type tear group was 0.77 ± 0.02, which was significantly higher than all other groups (p < 0.05). When the groups were evaluated based on LAA data, the mean LAA measurement of the L-type tear group was 76.98 ± 1.04 degrees, which was significantly lower than all other groups (p < 0.05). CONCLUSION: In our study, especially in L-shaped tears, measurements of GTA, CSA, AI, LAA, coronal and sagittal width were found to be different compared to the control group. These results suggest that shoulder anatomy affects the mechanisms of rotator cuff tear formation and that these parameters play a more significant role in L-shaped tears.

A gender and size specific evaluation of Grammont-type inlay versus lateralizing onlay stem designs in achieving lateralization and distalization in reverse shoulder arthroplasty.

INTRODUCTION: In reverse shoulder arthroplasty (RSA) new designs enable greater amounts of lateralization to prevent instability and scapular notching and increase range of motion, however, excessive lateralization leads to stress upon the acromion that can result in scapular spine fatigue fractures. Aim of this study was to gender- and size-specifically assess the influence of glenosphere size and different humeral designs on lateralization, distalization, and bony impingement-free range of motion (ROM) in patients undergoing RSA. METHODS: Computed tomography scans from 30 osteoarthritic patients (f:15, m:15) and 20 cuff tear arthropathy patients (f:10, m:10) were used to virtually simulate RSA implantation. The efficacy of an inlay Grammont-type system vs. an onlay lateralizing system combined with different glenosphere sizes (36 mm vs. 42 mm) in achieving ROM, lateralization, and distalization was evaluated. Moreover, gender and patient's constitution were correlated to humeral size by radiologically measuring the best-fit circle of the humeral head. RESULTS: A different amount of relative lateralization was achieved in both genders using large glenospheres and onlay designs. Latter yielded a higher ROM in all planes for men and women with a 42 mm glenosphere; with the 36 mm glenosphere, an increased ROM was observed only in men. The 155° inlay design led to joint medialization only in men, whereas all designs led to lateralization in women. When adjusting the absolute amount of lateralization to humerus' size (or patient's height), regardless of implant type, women received greater relative lateralization using 36 mm glenosphere (inlay: 1%; onlay 12%) than men with 42 mm glenosphere (inlay: -3%; onlay: 8%). CONCLUSION: The relative lateralization achieved using onlay design is much higher in women than men. Small glenospheres yield greater relative lateralization in women compared to large glenospheres in men. Humeral lateralization using onlay designs should be used cautiously in women, as they lead to great relative lateralization increasing stress onto the acromion. LEVEL OF EVIDENCE: Basic Science Study, Computer Modeling.

The Impact of Coracoid Tip Orientation on Subscapularis Tear Incidence: an MRI-Based Study.

PURPOSE OF THE STUDY: This study investigated the relationship between the position of the tip of the coracoid process (CP) relative to the glenoid with subscapularis (Ssc) tears. We hypothesized that the coracoid tip is more inferior, lateral and posterior in patients with Ssc tear. MATERIAL AND METHODS: This research enrolled 34 isolated Ssc tears and 44 controls. We introduced the axial central glenoid-coracoid angle (acGCA) and sagittal central glenoid-coracoid angle (scGCA) to evaluate the position of the tip of the CP relative to the glenoid center on MRI images. In both groups, acGCA, scGCA on MRI and critical shoulder angle (CSA), glenoid inclination (GI) on true anterior-posterior shoulder radiography were evaluated. RESULTS: When both groups were compared in terms of acGCA, the acGCA values of the Ssc tear group were significantly higher than the control group (p<0.001). The best cut-off value of acGCA for Ssc tears was 28.3°. acGCA values higher than 28.3° showed 93.3% sensitivity and 93.1% specificity for Ssc tears (likelihood ratio:13.53, AUC: 0.979, 95% CI of AUC: 0.950- 0.999). In terms of acGCA, the power analysis between Ssc tears group and control group was 99.9% between Ssc tears and the control group (effect size d=2.63). When both groups were compared in terms of scGCA, the scGCA values of the Ssc tear group were significantly higher than the control group (p<0.001). The best cut-off value of scGCA for Ssc tears was 41.4°. Scores of scGCA greater than 41.8° showed 80% sensitivity and 89.7% specificity for Ssc tears (likelihood ratio: 7.73, AUC: 0.899 95% CI of AUC: 0.837-0.958). In terms of scGCA, the power analysis between Ssc tear and control group was 99.8% (effect size d=1.23). When both groups were compared in terms of CSA and GI; CSA and GI values in the Ssc tear group were significantly higher (p<0.001 and p<0.012, respectively). CONCLUSIONS: AcGCA values higher than 28.3° indicate that the coracoid tip is located more laterally and posteriorly; scGCA values higher than 41.8° indicate that the coracoid tip is located more inferiorly and these two new indexes are showing that more laterally, posteriorly and inferiorly coracoid tip is related to subscapularis tears. KEY WORDS: coracoid process, subscapularis tear, coracoid morphology, scapula morphology.

Three-Dimensional Morphological Analysis of the Suprascapular Notch in Patients with Arthroscopic Rotator Cuff Repair.

Background: The morphology of the suprascapular notch (SSN) and the ossification of the superior transverse suprascapular ligament (STSL) are risk factors for injury of the suprascapular nerve (SN) during arthroscopic shoulder procedures. The purpose of the current study was to compare preoperative clinical and radiologic characteristics between patients with and without STSL ossification and to evaluate SSN morphology in patients who underwent arthroscopic rotator cuff repair using a 3-dimensional (3D) reconstructed model. Methods: Patients who underwent arthroscopic rotator cuff repair and were given a computed tomography (CT) scan from March 2018 to August 2019 were included in this study. Patients were divided into 2 groups: those without STSL ossification (group I) and those with STSL ossification (group II). Tear size of the rotator cuff and fatty infiltration of rotator cuff muscles were assessed in preoperative magnetic resonance imaging. The morphology of the SSN was classified following Rengachary's classification. The transverse and vertical diameters of the SSN and the distances from anatomical landmarks to the STSL were measured. All measurements were completed using a 3D CT reconstructed scapula model. Results: A total of 200 patients were included in this study. One hundred seventy-eight patients (89.0%) without STSL ossification were included in group I, and 22 patients (11.0%) with STSL ossification were included in group II. Group II showed a significantly advanced age (61.0 ± 7.4 vs. 71.0 ± 7.3 years, p < 0.001) and a shorter transverse diameter of SSN (10.7 ± 3.1 mm vs. 6.1 ± 3.7 mm, p < 0.001) than group I. In the logistic regression analysis, age was an independent prognostic factor for STSL ossification (odds ratio, 1.201; 95% confidence interval, 1.112-1.296; p < 0.001). Patients in type VI showed significantly shorter transverse diameters than other types (p < 0.001). The patient with type I showed a significantly shorter distance from the articular surface of the glenoid to the SSN than those with other types (p < 0.001). Conclusions: In the 3D morphological analysis, age was the independent factor associated with STSL ossification in patients who underwent arthroscopic rotator cuff repair. Type VI showed significantly shorter transverse diameters than other types. Type I showed a significantly shorter distance from the articular surface of the glenoid to the SSN than other types.

Transcending Patient Morphometry: Acromiohumeral Interval to Glenoid Ratio as a Universal Diagnostic Tool for Massive Rotator Cuff Tears.

Background: Morphological differences among various ethnicities can significantly impact the reliability of acromiohumeral interval (AHI) measurements in diagnosing massive rotator cuff tears. This variation raises questions about the generalizability of AHI studies conducted in Western populations to the Asian population. Consequently, the primary objective of this study was to develop a novel parameter that can enhance the diagnosis of massive rotator cuff tears, irrespective of morphometric disparities between individuals of different ethnic backgrounds. Methods: A 10-year retrospective analysis of shoulder arthroscopic surgery patients was conducted, categorizing them into 3 groups based on intraoperative findings: those without rotator cuff tears, those with non-massive tears, and those with massive tears. AHI-glenoid ratio (AHIGR) was measured by individuals with varying academic backgrounds, and its diagnostic performance was compared to AHI. Sensitivity, specificity, accuracy, and intra- and inter-rater reliability were evaluated. Results: AHIGR exhibited significantly improved sensitivity, specificity, and accuracy as a diagnostic tool for massive rotator cuff tears, compared to AHI. A proposed cut-off point of AHIGR ≤ 0.2 yielded comparable results to AHI < 7 mm. Intra- and inter-rater reliability was excellent among different observers. Conclusions: AHIGR emerges as a promising diagnostic tool for massive rotator cuff tears, offering improved sensitivity and specificity compared to AHI. Its reproducibility among diverse observers underscores its potential clinical utility. While further research with larger and more diverse patient cohorts is necessary, AHIGR offers significant potential as a reference for enhancing the assessment of massive rotator cuff tears.

The Destiny of the Subscapularis Tendon after Arthroscopic Supraspinatus Repair.

Background: The purpose of this study was to identify the changes in untreated subscapularis in patients who underwent supraspinatus repair and to evaluate the factors related to the changes in the subscapularis. Methods: A cohort of patients who underwent isolated supraspinatus repair with preservation of the subscapularis was reviewed. Changes in the subscapularis, including any newly formed lesion and aggravation of an existing lesion, were evaluated 12 months postoperatively on magnetic resonance imaging along with an examination to identify causative factors after supraspinatus repair. Clinical scores were compared between patients with and without subscapularis changes. Results: A total of 528 patients were reviewed. Changes in the subscapularis, including newly formed lesions and aggravation of an existing lesion, were shown in 90 patients (17.0%). Upon regression analysis, changes in the subscapularis were associated with the initial existence of a subscapularis lesion (grade I: p = 0.042, grade II: p = 0.025), an accompanying biceps lesion (p = 0.038), and a retear of the repaired supraspinatus (p = 0.024). No significant differences were shown in clinical scores between patients with and without subscapularis changes after supraspinatus repair. Conclusions: Untreated asymptomatic subscapularis may undergo morphological changes even after repair of the torn supraspinatus. Preoperative subscapularis lesions, biceps long head pathology, and retears of the repaired supraspinatus were associated with subscapularis pathology in patients who underwent supraspinatus repair.

Effects of Quality of Integrity on Clinical and Structural Outcomes of Rotator Cuff Repair: A Retrospective Cohort Study of 504 Cases.

BACKGROUND: The clinical implications of structural integrity have been a subject of long debate. The oversimplified binary categorization of structural integrity into either healing or retear, along with faulty preoperative baselines for comparison, may contribute to the controversy. PURPOSE: To determine how the quality of structural integrity in a repaired cuff tendon affects both clinical and structural outcomes by dividing the patients into groups based on integrity and using the immediate postoperative baseline (time zero). STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: A total of 504 patients with a full-thickness rotator cuff tear who underwent arthroscopic rotator cuff repair and were followed up for at least a year with magnetic resonance imaging (MRI) were included. The quality of structural integrity was graded using the Sugaya classification. To evaluate clinical outcomes, pain, range of motion, strength, functional scores, and overall satisfaction and function were used for within- and between-group analyses at the last follow-up. For the assessment of structural outcomes, the Goutallier classification for fatty infiltration (FI) and the tangent sign, occupation ratio, and normalized cross-sectional area for muscle atrophy (MA) were used. The baselines for these structural measurements were both the preoperative and the time-zero MRI scans. RESULTS: The mean clinical follow-up period was 31.8 ± 27.5 months, and the MRI follow-up period was 10.9 ± 5.3 months. There were 178 (35.3%), 228 (45.2%), 58 (11.5%), 14 (2.8%), and 26 (5.2%) shoulders with Sugaya grades 1, 2, 3, 4, and 5, respectively. Regardless of structural integrity, all clinical outcomes at a mean follow-up of 31.8 months after repair significantly improved compared with those before repair. Only in shoulders with Sugaya grade 1 did the FI of the supraspinatus muscle improve significantly from baseline. FI of the infraspinatus muscle did not change significantly in those with grades 1 and 2 but worsened in those with grades 3 and 5. MA measured using the occupation ratio improved significantly in shoulders with Sugaya grades 1 and 2 but declined in those with grade 5. CONCLUSION: This study established a correlation between improved structural integrity of the repaired cuff tendon and enhanced structural outcomes in rotator cuff muscles. Furthermore, the findings revealed that both FI and MA could be reversed in patients exhibiting high-quality structural integrity. However, these structural improvements were not mirrored in the clinical outcomes.

Risk Factors Analysis and Prediction of Rotator Cuff Tears: A Retrospective Study.

AIM: Rotator cuff tears (RCTs) are a major cause of shoulder pain and disability, affecting millions worldwide. Understanding the risk factors and developing reliable predictive measures for RCTs is essential for early diagnosis, targeted prevention, and effective treatment of this patient population. This study seeks to enhance our understanding by analyzing the acromiohumeral distance (AHD) and Constant-Murley Score (CMS) in patients with and without RCTs, thereby aiding the development of a predictive model aimed at improving clinical outcomes and prevention strategies in rotator cuff pathology. METHODS: This retrospective analysis involved 201 patients with shoulder pain, categorized into RCT (n = 72) and no RCTs (N-RCTs, n = 129) groups based on Magnetic Resonance Imaging (MRI) findings. We compared demographics, AHD, CMS, and rotator cuff status between groups and utilized logistic regression for identifying RCT predictors, leading to the development of a multifactorial predictive model. RESULTS: The mean AHD was 6.60 ± 1.12 mm. The RCT group showed a marginally higher AHD than the N-RCT group (p = 0.669). CMS scores were significantly lower in the RCT group (p < 0.001). Dominant side involvement (Odds Ratio (OR) 2.244), type III acromion (OR 6.106), and lower CMS (OR 0.938) significantly correlated with RCTs. The predictive model demonstrated an area under the curve (AUC) of 0.701 for RCT diagnosis. CONCLUSIONS: Reduced CMS, dominance of the affected side, and type III acromion emerged as key risk factors for RCTs. Our predictive model, incorporating these factors, holds promise for RCT diagnosis, with future studies needed for further validation.

Preliminary results of clinical, biochemical, and radiological investigation into the oxidative status in patients with rotator cuff tendinopathy.

We investigated oxidative status in patients with rotator cuff tendinopathy (RCT) and evaluated their relationship with radiological and clinical parameters. In this cross-section study, 88 patients with RCT (59 males and 29 females) and 86 healthy controls (66 males, 20 females) were enrolled. The sample consisted of nontraumatic patients who are suffering from shoulder pain because of rotator cuff disease, which was established by clinical tests and MRI scanning. Oxidative stress in patients with RCT was analyzed via the dynamic thiol/disulfide homeostasis (TDH). Thiol/disulfide homeostasis was measured by a new colorimetric method. Furthermore, oxidative stress was indirectly measured by serum total oxidant status (TOS), oxidative stress index (OSI), and total antioxidant capacity (TAC). Serum disulfide levels and the other oxidative stress parameters of the RCT group were significantly greater than those of the control group (P < .001 for all), whereas the anti-oxidative stress parameters remained unchanged (P > .05 for all). The lowest and highest serum disulfide levels were detected in patients with grades 1 and 3, respectively (P < .001). Furthermore, in a multiple regression analysis, the disulfide/natural thiol ratio (ß=-4.886, P = .004) and the MRI grading (ß=0.314, P=.001) were independently associated with the Western Ontario Rotator Cuff Index WORC score. We found an association between the levels of various serum markers of oxidative injury, especially serum disulfide levels, and the increasing severity of RCT. Thiol/disulfide homeostasis seems to play a critical role in RCT, both in the beginning and during the progression of disease.

Relationship between scapular body morphology and rotator cuff tears: a threedimensional computed tomography study.

The purpose of this study was to identify the relationship between scapula morphology and rotator cuff tears (RCT). Hundred seventeen shoulders with and 87 shoulders without RCTs were included in this retrospective study. The critical shoulder angle (CSA) and lateral acromion angle in the coronal view, and the acromial coverage angle (ACA) and coracoid and scapular spine angle (CSSA) in the sagittal view were evaluated using 3-dimensional computed tomography. The glenoid anterior tilt, anterior acromial projection angle (AAPA), coracoid process angle, scapular spine angle (SSA), and inferior angle angle (IAA) with respect to the scapular plane were measured in the sagittal view. In univariate logistic regression analysis, CSA, ACA, AAPA, SSA, and IAA were significantly greater in shoulders with RCTs, whereas CSSA was greater in shoulders without RCTs. In multivariate logistic regression analysis, CSA and IAA were greater in shoulders with RCT and were significantly associated with this condition (P=.00073, P=.0032). This study has shown us that RCTs were associated with a greater curvature of the scapular body and greater CSA and IAA.