Phylogenetic differences in the morphology and shape of the central sulcus in great apes and humans: implications for the evolution of motor functions.

The central sulcus divides the primary motor and somatosensory cortices in many anthropoid primate brains. Differences exist in the surface area and depth of the central sulcus along the dorso-ventral plane in great apes and humans compared to other primate species. Within hominid species, there are variations in the depth and aspect of their hand motor area, or knob, within the precentral gyrus. In this study, we used post-image analyses on magnetic resonance images to characterize the central sulcus shape of humans, chimpanzees (Pan troglodytes), gorillas (Gorilla gorilla), and orangutans (Pongo pygmaeus and Pongo abelii). Using these data, we examined the morphological variability of central sulcus in hominids, focusing on the hand region, a significant change in human evolution. We show that the central sulcus shape differs between great ape species, but all show similar variations in the location of their hand knob. However, the prevalence of the knob location along the dorso-ventral plane and lateralization differs between species and the presence of a second ventral motor knob seems to be unique to humans. Humans and orangutans exhibit the most similar and complex central sulcus shapes. However, their similarities may reflect divergent evolutionary processes related to selection for different positional and habitual locomotor functions.

Vertical mandibular asymmetry and hand measurements in patients in growth: cross-sectional study.

Objectives: The aim of this study was to determine the relationship between the vertical mandibular ramus asymmetry and the hand measurements asymmetry in growing patients. Material and Methods: Panoramic radiographs and comparative radiographs of the right and left hands of 40 patients (14 males and 26 females) between 6 and 16 years old (mean age of 11.35±1.99 years) were evaluated. The total height of the mandibular ramus was measured, and the asymmetry index was calculated. The lengths of the proximal, middle and distal phalanges and the metacarpals of the five digits of both hands were measured and the absolute differences R-L were calculated for each one. Results: A statistically significant association between the presence of vertical mandibular ramus asymmetry and the presence of phalanges asymmetry FPII (p=0.016), FPIII (p=0.016), FPIV (p=0.033), FMIII (p=0.031) and FMIV (p=0.016) was observed. Conclusions: Mandibular asymmetry appears not to be isolated but also present in other body districts such as the phalanx bones. The total vertical asymmetry of the mandibular ramus showed an association with the asymmetry of the lengths of the FPIII, FMIII, FPIV, FMIV and FPII in growing individuals, with association between the side of mandibular asymmetry and the side of the phalanx's asymmetry. The asymmetry of this phalanges increases with increasing index of vertical mandibular ramus asymmetry.

Ultrasound identification of hand and wrist anatomical structures by hand surgeons new to ultrasonographic techniques.

PURPOSE: Ultrasound is becoming an essential tool for hand surgeons, but most of them are trained on the job, without any diploma or dedicated training. The aim of this study was to assess the ability of hand surgeons new to ultrasound to identify hand and wrist anatomical structures. METHODS: A monocentric study was conducted from January 2022 to April 2022. Ten residents and five attending hand surgeons, ultrasound novices, were involved in this study. The participants underwent two tests, wherein they were required to identify 17 anatomical structures using ultrasound, on the same subject. The second test was similar and carried out 2 to 6 weeks later by all participants. The number of structures successfully identified and if it was the case, the detection time per structure, were recorded. The correlations between participants age, years of surgical experience, surgical background (orthopedic or plastic) and the ability to perform immediately during the first test or to progress between the two tests were also assessed. RESULTS: The average number of structures identified during the first test (T1) was 14.1+/-2.1 (82.9%), versus 16.2+/-0.8 (95.3%) structures during the second test (T2) (p = 0.001). The mean detection time per structure was 53.4 +/- 18.9 s during T1 versus 27.7 +/- 7.2 s during T2 (p < 0.0001). A moderate negative correlation between the progression in the number of anatomical structures identified between the two tests and the years of surgical experience (ρ=-0.56; p = 0.029) was found. The other parameters were neither correlated with the ability to perform at the first test nor with the progression between the two tests. CONCLUSION: Hand surgeons new to ultrasound are most of the time able to identify hand and wrist anatomical structures. Comparison of their first and second tests showed significant potential for improvement in anatomical structure identification and detection time of those, especially in surgeons with limited surgical experience.

Application of the "Hand as Foot" teaching method in liver Couinaud segmentation.

OBJECTIVE: We aim to provide a teaching method to better explain the liver Couinaud Segmentation teaching. METHOD: Through a deep understanding of the liver Couinaud Segmentation teaching, and after more than 20 years of teaching practice, our department teaching team pioneered "Hand as Foot ". RESULTS: The combined teaching method of "Hand as Foot" can clearly show the liver Couinaud Segmentation teaching. CONCLUSION: Compared with the traditional teaching method, "Hand as Foot" is favored by most teachers and students.

Fusion recognition of palmprint and palm vein based on modal correlation.

Biometric authentication prevents losses from identity misuse in the artificial intelligence (AI) era. The fusion method integrates palmprint and palm vein features, leveraging their stability and security and enhances counterfeiting prevention and overall system efficiency through multimodal correlations. However, most of the existing multi-modal palmprint and palm vein feature extraction methods extract only feature information independently from different modalities, ignoring the importance of the correlation between different modal samples in the class to the improvement of recognition performance. In this study, we addressed the aforementioned issues by proposing a feature-level joint learning fusion approach for palmprint and palm vein recognition based on modal correlations. The method employs a sparse unsupervised projection algorithm with a "purification matrix" constraint to enhance consistency in intra-modal features. This minimizes data reconstruction errors, eliminating noise and extracting compact, and discriminative representations. Subsequently, the partial least squares algorithm extracts high grayscale variance and category correlation subspaces from each modality. A weighted sum is then utilized to dynamically optimize the contribution of each modality for effective classification recognition. Experimental evaluations conducted for five multimodal databases, composed of six unimodal databases including the Chinese Academy of Sciences multispectral palmprint and palm vein databases, yielded equal error rates (EER) of 0.0173%, 0.0192%, 0.0059%, 0.0010%, and 0.0008%. Compared to some classical methods for palmprint and palm vein fusion recognition, the algorithm significantly improves recognition performance. The algorithm is suitable for identity recognition in scenarios with high security requirements and holds practical value.

Exploratory analysis using machine learning algorithms to predict pinch strength by anthropometric and socio-demographic features.

Objectives. This study examines the role of different machine learning (ML) algorithms to determine which socio-demographic factors and hand-forearm anthropometric dimensions can be used to accurately predict hand function. Methods. The cross-sectional study was conducted with 7119 healthy Iranian participants (3525 males and 3594 females) aged 10-89 years. Seventeen hand-forearm anthropometric dimensions were measured by JEGS digital caliper and a measuring tape. Tip-to-tip, key and three-jaw chuck pinches were measured using a calibrated pinch gauge. Subsequently, 21 features pertinent to socio-demographic factors and hand-forearm anthropometric dimensions were used for classification. Furthermore, 12 well-known classifiers were implemented and evaluated to predict pinches. Results. Among the 21 features considered in this study, hand length, stature, age, thumb length and index finger length were found to be the most relevant and effective components for each of the three pinch predictions. The k-nearest neighbor, adaptive boosting (AdaBoost) and random forest classifiers achieved the highest classification accuracy of 96.75, 86.49 and 84.66% to predict three pinches, respectively. Conclusions. Predicting pinch strength and determining the predictive hand-forearm anthropometric and socio-demographic characteristics using ML may pave the way to designing an enhanced tool handle and reduce common musculoskeletal disorders of the hand.

Hand Anthropometry of Italian Elite Male Swimmers / Antropometría de la Mano en Nadadores Italianos Masculinos de Élite

SUMMARY: Hand size is part of the anthropometric parameters that are assessed in swimmers to select elite athletes, as certain anthropometric relationships involving hand measurements are significantly correlated with sports performance in various swimming disciplines. The authors present the results of the anthropometric study carried out on the hands of 15 elite male Italian swimmers from to the Italian national open water swimming team. All swimmers participated at least once in World Cup and Absolute Italian Championships, winning at least one medal in their sporting career. In particular, the sample includes a medallist at the World Championships, a winner of the World Cup ultra swim marathon circuit and medallists at the European Championships. The sample consisted of 15 elite male swimmers with a mean age of 28.93 years. The following anthropometric measurements were taken on each athlete: Stature; weight; seven dimensions on each hand: hand length; hand breadth metacarpal; palm length; middle finger length; index finger length; thumb distance; and the distance from the thumb root to first flexure line of the index finger - trigger length. The size of the hands is an important factor in the swimmer's propulsion and push as a larger hand allows for greater support in the water and consequently generates more resistance. The anthropometric characteristics of the hands of Italian swimmers are missing from the anthropometric data already reported in the literature and can be used to make comparisons with elite athletes from other nations. Furthermore, anthropometric measurements could be used as predictors to estimate the swimmers' chance of success.

El tamaño de la mano es uno de los parámetros antropométricos que se evalúan en los nadadores para seleccionar a los deportistas de élite. Los autores presentan los resultados de un estudio antropométrico realizado en las manos de 15 nadadores italianos masculinos de élite pertenecientes al equipo nacional de natación en aguas abiertas. Todos los nadadores participaron al menos una vez en Copas del Mundo y Campeonatos de Italia, ganando al menos una medalla en su carrera deportiva. En concreto, la muestra incluye un medallista en los Campeonatos del Mundo, un ganador de la Copa del Mundo del circuito de ultra maratón de natación y medallistas en los Campeonatos de Europa. La muestra consta de 15 nadadores masculinos de élite con una edad media de 28,93 años. Se tomaron las siguientes medidas antropométricas a cada atleta: estatura; peso; siete dimensiones en cada mano: longitud de la mano, anchura de la mano en el metacarpiano, longitud de la palma, longitud del primer, segundo y tercer dedo, distancia entre la raíz del primer dedo y la primera línea de flexión del segundo dedo. El tamaño de las manos es un factor importante para la propulsión y el empuje del nadador, ya que una mano más grande permite un mayor apoyo en el agua y, en consecuencia, genera más resistencia. Las características antropométricas de las manos de los nadadores italianos faltan en los datos antropométricos recolectados en la literatura y pueden utilizarse para hacer comparaciones con los atletas de élite de otras naciones. Además, las medidas antropométricas podrían utilizarse como predictores para estimar las posibilidades de éxito de los nadadores.

Persistent median artery and communicating branch related to the superficial palmar arch.

Microvascular surgery, plastic and reconstructive hand surgery, and coronary artery bypass surgery call for a microanatomical study of the branching pattern of the superficial palmar arch (SPA). For the anatomical analysis, we used a group of 20 dissected human hands injected with 4% formaldehyde solution and a 10% mixture of melted gelatin and India ink. The morphometric study was performed on 40 human hands of adult persons injected with methyl-methacrylate fluid into the ulnar and radial arteries simultaneously and afterwards corroded in 40% KOH solution for the preparation of corrosion cast specimens. The mean diameter of the SPA, between the second and third common palmar digital arteries, was 1.86 ± 0.08 mm. We identified the persistent median artery (PMA) in 5% of hands. We distinguished the three main groups of the SPAs according to variations in morphology and branching of the arch: Type 1, the long SPA; Type 2, the middle length SPA; and Type 3, the short SPA found in 27.5% of specimens. The communicating branch (CB), a vessel interconnecting the SPA to the closest branch of the radial artery, is classified into two different morphological groups. The third type of incomplete short arterial arch is the most important of the three groups of SPAs. That short SPA is potentially inadequate for restoring circulation after occlusion or radial artery harvesting for coronary artery bypass.

Aberrant accessory abductor digiti minimi manus muscle: a rare anatomical variation.

The hypothenar muscle with the greatest frequency of variations is the abductor digiti minimi manus. Except for morphological variations of this muscle, have also been reported cases of an extra wrist muscle, the accessory abductor digiti minimi manus muscle. This case report presents a rare case of an accessory abductor digiti minimi muscle characterized by an unusual origin from the tendons of the flexor digitorum superficialis. This anatomical variation was identified on a formalin - fixed male cadaver of Greek origin during routine dissection. This anatomical variation, which may result in Guyon's canal syndrome or complicate common wrist and hand surgical procedures such as the carpal tunnel release, should be known to orthopaedic surgeons and hand surgeons in particular.

Identification of the length and location of the A1 pulley combining palpation technique with palm landmarks: a cadaveric study.

Through anatomical morphology, to accumulate the relevant parameters of the A1 pulley of each adult finger. A total of 100 fingers were selected, dissected layer by layer, and the A1 pulley and neurovascular of each finger were observed. Measure the length of the A1 pulley, the distance between the needle knife insertion point and the proximal edge of A1 pulley, and the nerves and blood vessels on both sides. (1) The length of A1 pulleys of each finger is 6.18 ± 0.33 mm, 6.58 ± 0.73 mm, 5.98 ± 0.67 mm, 5.36 ± 1.08 mm, 5.63 ± 1.09 mm. (2) The distances between the needle knife entry point of each finger and the volar proper nerve of the ulnar finger are 7.00 ± 1.55 mm, 8.29 ± 1.46 mm, 5.10 ± 0.25 mm, 5.30 ± 0.24 mm, 0 mm; the distances from the volar proper nerve of the radial finger are 9.08 ± 0.87 mm, 4.70 ± 1.10 mm, 7.03 ± 0.72 mm, 6.81 ± 0.22 mm, 7.81 ± 0.57 mm. (3) The distances between the needle knife entry point of each finger and the proper volar artery of the ulnar finger are 10.40 ± 0.75 mm, 8.89 ± 0.53 mm, 6.35 ± 0.44 mm, 7.26 ± 0.16 mm, 0 mm, respectively; The distances from the volar proper artery of the radial finger are 8.75 ± 1.07 mm, 6.10 ± 0.35 mm, 11.44 ± 0.41 mm, 8.19 ± 0.60 mm, 9.78 ± 0.68 mm, respectively. The landmarks of the needle entry points are located at the position corresponding to the highest point of the metacarpal heads, except the tail finger. From the needle knife entry point to distal, cut the proximal edge of the A1 pulley longitudinally along the midline until the patient can flex autonomously, and pay attention to the distance between the two sides of 3.60-11.85 mm neurovascular bundle.

First Experience of Plastination at 4150 Meters Above Sea Level, at the Altitude of La Paz, Bolivia / Primera Experiencia de Plastinación a 4150 Metros sobre el Nivel del Mar, en la Altura de La Paz, Bolivia

SUMMARY: Despite attempts to develop the plastination technique in Bolivia, standardized results have not yet been achieved that could be communicated via scientific publications. There is a great deal of misunderstanding around the technique, confusing it with classic techniques of inclusion in different types of resin, such as polyester and epoxy, but these protocols are not plastination. The aim of this work was to communicate the first standardized room-temperature plastination protocol with silicone in Bolivia, with the unique feature of doing so at the altitude of the city of La Paz, thus constituting the first communication of a plastination technique at 4,150 m.a.s.l. sub sede La Paz, La Paz, Bolivia.

En Bolivia, a pesar de los intentos en el desarrollo de la técnica de Plastinación, aún no se han alcanzado resultados estandarizados que pudieran ser comunicados por medio de publicaciones científicas. Existe una gran confusión al momento de desarrollar la técnica, confundiéndola con técnicas clásicas de inclusión en distintos tipos de reina, como poliéster y epoxy, pero no correspondiendo estos protocolos desarrollados a la técnica de plastinación. En este sentido, el objetivo de esta trabajo consistió en comunicar el primer protocolo estandarizado de plastinación a temperatura ambiente con silicona de Bolivia, con la particularidad de desarrollarlo en la altura de la ciudad de La Paz, constituyéndose, de esta manera, en la primera comunicación de una técnica de plastinación a 4.150 metros sobre el nivel del mar.

Influence of Surface Geometry on Palm and Fist Contact Pressure Distribution During Strikes With the Hand in Automotive Assembly.

The increase in repetitive strain injuries to the hand underscores the need for assessing and preventing musculoskeletal overuse associated with hand-intensive tasks. This study investigates the risk of overload injuries in soft tissue structures of the hand by analyzing the pressure distribution and location of peak pressure in the hand during snap-fit connection assembly in the automotive industry. The influence of the surface geometry of automotive trim components the pressure distribution and force imparted during strikes with the palm and the fist are investigated in a cohort of 30 subjects with extensive experience installing trim parts with snap-fit connections. Using the palm or fist (ulnar hand side) of the dominant hand, the subjects struck a simulation device with a flat, rounded, or edged surface geometry. The average peak force applied was 600 N (±122 N), nearly 3 times the force required to overcome the technical resistance of the snap-fit connector (220 N). Fist strikes exerted a 40% higher mean peak pressure and 18% higher mean pressure than did palm strikes. The pressure distribution in the region of the thenar eminence and soft tissue of the ulnar side of the hand did not differ between fist strikes on flat and edged surfaces. Considering the delicate anatomy of the hand, especially the hypothenar muscles on the ulnar side, assembling connection claps using the fist instead of the palm may prevent repetitive blunt trauma to the sensitive blood vessels and nerves in the palm.

Cortical bone distribution of the proximal phalanges in great apes: implications for reconstructing manual behaviours.

Primate fingers are typically in direct contact with the environment during both locomotion and manipulation, and aspects of external phalangeal morphology are known to reflect differences in hand use. Since bone is a living tissue that can adapt in response to loading through life, the internal bone architecture of the manual phalanges should also reflect differences in manual behaviours. Here, we use the R package Morphomap to analyse high-resolution microCT scans of hominid proximal phalanges of digits 2-5 to determine whether cortical bone structure reflects variation in manual behaviours between bipedal (Homo), knuckle-walking (Gorilla, Pan) and suspensory (Pongo) taxa. We test the hypothesis that relative cortical bone distribution patterns and cross-sectional geometric properties will differ both among extant great apes and across the four digits due to locomotor and postural differences. Results indicate that cortical bone structure reflects the varied hand postures employed by each taxon. The phalangeal cortices of Pongo are significantly thinner and have weaker cross-sectional properties relative to the African apes, yet thick cortical bone under their flexor sheath ridges corresponds with predicted loading during flexed finger grips. Knuckle-walking African apes have even thicker cortical bone under the flexor sheath ridges, as well as in the region proximal to the trochlea, but Pan also has thicker diaphyseal cortices than Gorilla. Humans display a distinct pattern of distodorsal thickening, as well as relatively thin cortices, which may reflect the lack of phalangeal curvature combined with frequent use of flexed fingered hand grips during manipulation. Within each taxon, digits 2-5 have a similar cortical distribution in Pongo, Gorilla and, unexpectedly, Homo, which suggest similar loading of all fingers during habitual locomotion or hand use. In Pan, however, cortical thickness differs between the fingers, potentially reflecting differential loading during knuckle-walking. Inter- and intra-generic variation in phalangeal cortical bone structure reflects differences in manual behaviours, offering a comparative framework for reconstructing hand use in fossil hominins.

Recognition Performance Analysis of a Multimodal Biometric System Based on the Fusion of 3D Ultrasound Hand-Geometry and Palmprint.

Multimodal biometric systems are often used in a wide variety of applications where high security is required. Such systems show several merits in terms of universality and recognition rate compared to unimodal systems. Among several acquisition technologies, ultrasound bears great potential in high secure access applications because it allows the acquisition of 3D information about the human body and is able to verify liveness of the sample. In this work, recognition performances of a multimodal system obtained by fusing palmprint and hand-geometry 3D features, which are extracted from the same collected volumetric image, are extensively evaluated. Several fusion techniques based on the weighted score sum rule and on a wide variety of possible combinations of palmprint and hand geometry scores are experimented with. Recognition performances of the various methods are evaluated and compared through verification and identification experiments carried out on a homemade database employed in previous works. Verification results demonstrated that the fusion, in most cases, produces a noticeable improvement compared to unimodal systems: an EER value of 0.06% is achieved in at least five cases against values of 1.18% and 0.63% obtained in the best case for unimodal palmprint and hand geometry, respectively. The analysis also revealed that the best fusion results do not include any combination between the best scores of unimodal characteristics. Identification experiments, carried out for the methods that provided the best verification results, consistently demonstrated an identification rate of 100%, against 98% and 91% obtained in the best case for unimodal palmprint and hand geometry, respectively.

Body mass estimates from postcranial skeletons and implication for positional behavior in Nacholapithecus kerioi: Evolutionary scenarios of modern apes.

This study reported the body mass (BM) estimates of the Middle Miocene fossil hominoid Nacholapithecus kerioi from Africa. The average BM estimates from all forelimb and hindlimb skeletal elements was 22.7 kg, which is slightly higher than the previously reported estimate of ~22 kg. This study revealed that Nacholapithecus has a unique body proportion with an enlarged forelimb relative to a smaller hindlimb, suggesting an antipronograde posture/locomotion, which may be related to the long clavicle, robust ribs, and some hominoid-like vertebral morphology. Because the BM of Nacholapithecus in this study was estimated to be below 30 kg, Nacholapithecus probably did not have relatively shorter and robust femora, which may result from other mechanical constraints, as seen in extant African hominoids. The BM estimate of Nacholapithecus suggests that full substantial modifications of the trunk and forelimb anatomy for risk avoidance and foraging efficiency, as seen in extant great apes, would not be expected in Nacholapithecus. Because larger monkeys are less arboreal (e.g., Mandrillus sphinx or Papio spp.), and the maximum BM among extant constant arboreal cercopithecoids is ~24 kg (male Nasalis larvatus), Nacholapithecus would be a constant arboreal primate. Although caution should be applied because of targeting only males in this study, arboreal quadrupedalism with upright posture and occasional antipronograde locomotion (e.g., climbing, chambering, descending, arm-swing, and sway) using the powerful grasping capacity of the hand and foot may be assumed for positional behavior of Nacholapithecus.

Association of handgrip strength with anthropometry of a Brazilian healthy adolescent sample.

The importance of dynamometric and anthropometric information for industry is known; however, few studies have investigated the relationship between anthropometry and handgrip strength (HGS) in adolescents. The aim of the present study was to investigate the association of anthropometric variables with the level of HGS production in adolescents. Participants were 541 adolescents aged 12-16 years from a public school in the city of Rio de Janeiro. The behavior of the following variables was examined: the ability to generate HGS, age, total body mass, height and hand dimensions (hand width, hand span, hand length). The results showed an increase in the ability to generate HGS in adolescence and a significant difference between the genders from 13 years old, where boys generated higher HGS values. Correlations between HGS and total body mass and the hand width stood out in both genders, indicating a greater association.