Handheld methanol detector for beverage analysis: interlaboratory validation.

Methanol is a toxic alcohol contained in alcoholic beverages as a natural byproduct of fermentation or added intentionally to counterfeits to increase profit. To ensure consumer safety, many countries and the EU have established strict legislation limits for methanol content. Methanol concentration is mostly detected by laboratory instrumentation since mobile devices for routine on-site testing of beverages in distilleries, at border stations or even at home are not available. Here, we validated a handheld methanol detector for beverage analysis in an ISO 5725 interlaboratory trial: a total of 119 measurements were performed by 17 independent participants (distilleries, universities, authorities, and competence centers) from six countries on samples with relevant methanol concentrations (0.1, 1.5 vol%). The detector was based on a microporous separation filter and a nanostructured gas sensor allowing on-site measurement of methanol down to 0.01 vol% (in the liquid) within only 2 min by laymen. The detector showed excellent repeatability (<5.4%), reproducibility (<9.5%) and small bias (<0.012 vol%). Additional measurements on various methanol-spiked alcoholic beverages (whisky, rum, gin, vodka, tequila, port, sherry, liqueur) indicated that the detector is not interfered by environmental temperature and spirit composition, featuring excellent linearity (R2 > 0.99) down to methanol concentrations of 0.01 vol%. This device has been recently commercialized (Alivion Spark M-20) with comparable accuracy to the gold-standard gas chromatography and can be readily applied for final product inspection, intake control of raw materials or to identify toxic counterfeit products.

Ethanol, acetaldehyde, and methanol in the gas phase and rainwater in different biomes and urban regions of Brazil.

In the context of the increasing global use of ethanol biofuel, this work investigates the concentrations of ethanol, methanol, and acetaldehyde, in both the gaseous phase and rainwater, across six diverse urban regions and biomes in Brazil, a country where ethanol accounts for nearly half the light-duty vehicular fuel consumption. Atmospheric ethanol median concentrations in São Paulo (SP) (12.3 ± 12.1 ppbv) and Ribeirão Preto (RP) (12.1 ± 10.9 ppbv) were remarkably close, despite the SP vehicular fleet being ∼13 times larger. Likewise, the rainwater VWM ethanol concentration in SP (4.64 ± 0.38 µmol L-1) was only 26 % higher than in RP (3.42 ± 0.13 µmol L-1). This work demonstrated the importance of evaporative emissions, together with biomass burning, as sources of the compounds studied. The importance of biogenic emissions of methanol during forest flooding was identified in campaigns in the Amazon and Atlantic forests. Marine air masses arriving at a coastal site led to the lowest concentrations of ethanol measured in this work. Besides vehicular and biomass burning emissions, secondary formation of acetaldehyde by photochemical reactions may be relevant in urban and non-urban regions. The combined deposition flux of ethanol and methanol was 6.2 kg ha-1 year-1, avoiding oxidation to the corresponding and more toxic aldehydes. Considering the species determined here, the ozone formation potential (OFP) in RP was around two-fold higher than in SP, further evidencing the importance of emissions from regional distilleries and biomass burning, in addition to vehicles. At the forest and coastal sites, the OFP was approximately 5 times lower than at the urban sites. Our work evidenced that transition from gasoline to ethanol or ethanol blends brings the associated risk of increasing the concentrations of highly toxic aldehydes and ozone, potentially impacting the atmosphere and threatening air quality and human health in urban areas.

A Static Headspace Gas Chromatography Method for Quantitation of Residual Solvents in Nanoformulations.

Various organic solvents are widely used in the manufacturing, processing, and purification of drug substances, drug products, formulations, excipients, etc. These solvents must be removed to the lowest amount permitted, as they do not possess any therapeutic advantages and may cause undesirable toxicities. Therefore, a rapid and sensitive analytical method for the quantitation of residual solvents is needed. The following chapter presents a static headspace gas chromatographic (HSGC) method for determining the concentration of common residual solvents in various nanoformulations. An efficient and sensitive HSGC method has been developed using PerkinElmer's headspace autosampler/gas chromatographic system with a flame ionization detector (FID) and validated according to the International Conference for Harmonization (ICH) guideline Q3C. The method validation indicates that the method is specific, linear, accurate, precise, and sensitive for the analyzed solvents. The method is suitable for the analysis of 13 residual solvents (methanol, ethanol, acetone, diethyl ether, 2-propanol, acetonitrile, 1-propanol, ethyl acetate, tetrahydrofuran, dichloromethane, chloroform, 1-butanol, and pyridine) and utilizes an Elite 624 Crossbond 6% cyanopropylphenyl, 94% dimethylpolysiloxanes column with helium as a carrier gas.

Determination of bisphenols in beeswax based on sugaring out-assisted liquid-liquid extraction: Method development and application in survey, recycling and degradation studies.

The methodology of sugaring out-assisted liquid-liquid extraction (SULLE) coupled with high-performance liquid chromatography-fluorescence detection was devised for quantifying bisphenol A (BPA) and bisphenol B (BPB) in beeswax. The effectiveness of SULLE was methodically explored and proved superior to the salting out-assisted liquid-liquid extraction approach for beeswax sample preparation. The analytical performance underwent comprehensive validation, revealing detection limits of 10 µg/kg for BPA and 20 µg/kg for BPB. The method developed was employed to analyse commercial beeswax (n = 15), beeswax foundation (n = 15) and wild-build comb wax (n = 26) samples. The analysis revealed BPA presence in four commercial beeswax samples and three beeswax foundation samples, with the highest detected residue content being 88 ± 7 µg/kg. For BPB, two beeswax foundation samples were positive, with concentrations below the limits of quantification and 85 ± 4 µg/kg, respectively. No bisphenols were detected in wild-build comb wax. Furthermore, the bisphenol removal efficacy of two recycling methods-boiling in water and methanol extraction-was assessed. The findings indicated that after four recycling cycles using water boiling, 9.6% of BPA and 29.2% of BPB remained in the beeswax. Whereas methanol extraction resulted in approximately 7% residual after one recycling process. A long-term study over 210 days revealed the slow degradation of bisphenols in comb beeswax. This degradation fitted well with a first-order model, indicating half-lives (DT50) of 139 days for BPA and 151 days for BPB, respectively. This research provides the first report on bisphenol contamination in beeswax. The low removal rate during the recycling process and the gradual degradation in beeswax underscore the significance of bisphenol contamination and migration in bee hives along with their potential risk to pollinators warranting concern. Furthermore, the developed SULLE method shows promise in preparing beeswax samples to analyse other analytes.

Optimization of ultrasound-aided extraction of bioactive ingredients from Vitis vinifera seeds using RSM and ANFIS modeling with machine learning algorithm.

Plant materials are a rich source of polyphenolic compounds with interesting health-beneficial effects. The present study aimed to determine the optimized condition for maximum extraction of polyphenols from grape seeds through RSM (response surface methodology), ANFIS (adaptive neuro-fuzzy inference system), and machine learning (ML) algorithm models. Effect of five independent variables and their ranges, particle size (X1: 0.5-1 mm), methanol concentration (X2: 60-70% in distilled water), ultrasound exposure time (X3: 18-28 min), temperature (X4: 35-45 °C), and ultrasound intensity (X5: 65-75 W cm-2) at five levels (- 2, - 1, 0, + 1, and + 2) concerning dependent variables, total phenolic content (y1; TPC), total flavonoid content (y2; TFC), 2, 2-diphenyl-1-picrylhydrazyl free radicals scavenging (y3; %DPPH*sc), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) free radicals scavenging (y4; %ABTS*sc) and Ferric ion reducing antioxidant potential (y5; FRAP) were selected. The optimized condition was observed at X1 = 0.155 mm, X2 = 65% methanol in water, X3 = 23 min ultrasound exposure time, X4 = 40 °C, and X5 = 70 W cm-2 ultrasound intensity. Under this situation, the optimal yields of TPC, TFC, and antioxidant scavenging potential were achieved to be 670.32 mg GAE/g, 451.45 mg RE/g, 81.23% DPPH*sc, 77.39% ABTS*sc and 71.55 µg mol (Fe(II))/g FRAP. This optimal condition yielded equal experimental and expected values. A well-fitted quadratic model was recommended. Furthermore, the validated extraction parameters were optimized and compared using the ANFIS and random forest regressor-ML algorithm. Gas chromatography-mass spectroscopy (GC-MS) and liquid chromatography-mass spectroscopy (LC-MS) analyses were performed to find the existence of the bioactive compounds in the optimized extract.

Evaluation of phytochemical, antibacterial, thrombolytic, anti-inflammatory, and cytotoxicity profile of Achyranthes aspera aerial part extracts.

This investigation was designed and performed to compare the phytochemical profiling, activities of antibacterial, thrombolytic, anti-inflammatory, and cytotoxicity of methanol extract (ME-E) and aqueous extract (AQ-E) of aerial parts of Achyranthes aspera through in-vitro approach. Also characterize the functional groups of bioactive compounds in the ME-E through Fourier-transform infrared (FTIR) spectroscopy analysis. Interestingly, qualitative phytochemical screening proved that the ME-E contain more number of vital phytochemicals such as phenolics. saponins, tannins, alkaloids, flavonoids, cardiac glycosides, steroids, and phlobatannins than AQ-E. Similarly, the ME-E showed notable antibacterial activity as dose dependent manner against Bacillus subtilis, Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, and Pseudomonas aeruginosa at 1000 µg mL-1 concentration. ME-E also showed 75.2 ± 2% of clot lysis (thrombolytic activity) at 1000 µg mL-1 dosage and it followed by AQ-E 51.24 ± 3%. The ME-E showed moderate and AQ-E demonstrate poor anti-inflammatory activity evidenced by albumin denaturation inhibition and anti-lipoxygenase assays. Furthermore, the ME-E demonstrated a dose dependent cytotoxicity was noted against brine shrimp larvae. In support of this ME-E considerable activities, the Fourier transform infrared (FTIR) analysis confirmed that this extract contain more number peaks attributed to the stretch of various essential functional groups belongs to different bioactive compounds. Hence this ME-E of A. aspera can be considered for further in depth scientific investigations to validate their maximum biomedical potential.

Antimicrobial and biocompatibility nature of methanol extract of Lannea coromandelica bark and edible coating film preparation for fruit preservation.

This research was performed to evaluate the antimicrobial activity of methanol extract of Lannea coromandelica bark against fruit damage causing microbes such as fungi: Alternaria sp., Aspergillus sp., Botrytis sp., Cladosporium sp., Fusarium sp., Penicillium sp., Phytophthora sp., and Trichoderma sp. The bacteria: such as Chromobacter sp., Enterobacter sp., Erwinia sp., Flavobacterium sp., Lactobacillus sp., Pseudomonas sp., and Xanthomonas sp. was investigated. Furthermore, their biocompatibility nature was determined through animal (rat) model study and their fruit preserving potential was determined by edible coating preparation with chitosan and other substances. Interestingly, the extract showed dose dependent (1000 µg mL-1) activity against these microbes in the following order: Enterobacter sp. (26.4 ± 1.5) > Chromobacter sp. (25.4 ± 1.6) > Pseudomonas sp. (24.5 ± 1.3) > Flavobacterium sp. (24.3 ± 1.4) > Xanthomonas sp. (23.6 ± 1.6) > Erwinia sp. (23.6 ± 1.6) > Lactobacillus sp. (19.6 ± 1.3). Similarly, the antifungal activity was found as Penicillium sp. (32.6 ± 1.3) > Cladosporium sp. (32.6 ± 1.5) > Alternaria sp. (30.3 ± 1.2) > Aspergillus sp. (29.9 ± 1.8) > Botrytis sp. (29.8 ± 1.2) > Fusarium sp. (28.6 ± 1.5) > Trichoderma sp. (19.8 ± 1.4) > Phytophthora sp. (16.2 ± 1.1). The acute toxicity and histopathological study results revealed that the extract possesses biocompatible in nature. The illumination transmittance and active functional groups involved in interaction among test methanol extract and chitosan investigated by UV-vis and Fourier-transform infrared spectroscopy (FTIR) analyses and found average light transmittance and few vital functional groups accountable for optimistic interaction to creak edible coating. Approximately four (set I-IV) treatment sets were prepared, and it was discovered that all of the coated Citrus maxima fruit quality characteristics including total soluble solids (TSS), weight loss (%), pH of fruit pulp juice, and decay percentage were significantly (p>0.05) better than uncoated fruit.

Bioactive agents from Parkia biglobosa (Jacq.) R.Br. ex G. Don bark extracts for health promotion and nutraceutical uses.

BACKGROUND: Parkia biglobosa stem bark extracts were prepared using methanol, methanol 80%, water and ethyl acetate to investigate their phytochemical contents, as well as antioxidant and enzyme inhibitory properties. RESULTS: Liquid chromatography (LC) quadrupole time-of-flight mass spectrometry (MS) and LC-MSn revealed the presence of flavonoids, hydroxycinnamic acid derivatives and gallotannins. Particularly, the water extract contained rutin (480 µg per 100 mg) and 3-caffeoylquinic acid (1109 µg per 100 mg) in higher amounts, whereas the 80% methanol extract contains methoxyluteolin-7-O-rutinoside and catechin derivatives as major compounds. Total phenolic and flavonoid contents of the extracts were yielded in the range of 32.26-119.88 mg gallic acid equivalents g-1 and 0.60-2.39 mg rutin equivalents g-1 , respectively. Total antioxidant capacity was also displayed in the range of 0.53-6.34 mmol Trolox equivalents (TE) g-1 . Both the methanolic extracts showed higher total antioxidant capacity that could be related to the total phenolic contents. Radical scavenging capacity in DPPH (2,2-diphenyl-2-picryl-hydrazyl) (37.21-508.30 mg TE g-1 ) and ABTS [2,2-azinobis(3-ethylbenzothiazoline- 6-sulfonic acid)] (60.95-1068.06 mg TE g-1 ) assays, reducing power in cupric ion reducing antioxidant capacity (54.23-1002.78 mg TE g-1 ) and ferric ion reducing antioxidant power (33.18-558.68 mg TE g-1 ) assays, as well as metal chelating activity (2.45-11.28 mg EDTA equivalents g-1 ), were exhibited by all extracts. All extracts were found to inhibit acetylcholinesterase [0.23-2.47 mg galanthamine equivalents (GALAE) g-1 ], tyrosinase [27.20-83.33 mg kojic acid equivalents g-1 ], amylase [mmol acarbose equivalents (ACAE) g-1 ]. On the other hand, all extracts, except the water extract, inhibited butyrylcholinesterase (5.38-6.56 mg GALAE g-1 ), whereas only the water and ethyl acetate extract showed glucosidase inhibitory potential (1.96 and 1.82 mmol ACAE g-1 ). In general, the water extract was found to be a weaker enzyme inhibitor suggesting that water is not the preferrable extraction solvent to obtain active products. CONCLUSION: The present study demonstrated that the stem bark extracts of P. biglobosa contains good amount of phytochemical and extracts present significant antioxidant, as well as reasonable enzyme inhibitory effects. Hence, these findings suggest that further studies can be performed on more specific biological targets and models of bioactivity to determine their safe usage as a nutraceutical or for the preparation functional foods. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

[Rapid detection of four amphetamine-type drugs in hair by pulsed direct current electrospray mass spectrometry].

Amphetamine-type drugs are synthetic compounds with an amphetamine parent structure. These compounds cause addiction, central nervous system excitation, and hallucinations. The number of drug users worldwide has gradually increased because amphetamine-type drugs can be synthesized in a simple and artificial manner. The current methods for anti-drug screening and toxicant identification are limited by the large quantity and variety of the drug analytes and long detection times. Thus, the development of broad-spectrum, rapid, and high-throughput detection methods is an urgent necessity. In addition, conventional amphetamine-type drug test samples, such as blood and urine, are only suitable for short-term drug identification. Hair has the advantages of easy preservation, stability, and a long detection window, which can compensate for the deficiencies of body-fluid-based test materials. Hair samples can reflect long-term drug use, which is beneficial for tracing drug sources, and has become an important means of providing evidence in court. Because most laboratory instruments are unable to perform the rapid on-site detection of amphetamine-type drugs in hair, establishing a high-throughput, qualitative and quantitative rapid on-site detection method is necessary. In this study, pulsed direct current electrospray ionization (Pulsed-DC-ESI) coupled with mass spectrometry was used for the rapid detection of four amphetamine-type drugs (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine) in hair. Methanol was used as the extraction solvent, and the grinding method was used for extraction. The pretreatment process included cutting, grinding, and centrifugation. The pretreatment time for each sample was about 10 min. Multiple samples could be processed in batches, greatly improving the efficiency of analysis. Pulsed-DC-ESI is an ambient ionization technology that can be conducted via direct injection without chromatographic separation. The tip of the spray capillary tube was immersed 1 cm below the surface of the sample solution to allow absorption via the capillary effect. When the spray capillary tube contained 1 µL of the sample solution, detection was performed. Pulsed-DC-ESI generates an electrospray at the same frequency as the mass spectrum, thereby avoiding the problem of sample wastage, which often occurs in traditional ESI. The portable mass spectrometer used for analysis is a linear ion trap mass spectrometer. The parameters of Pulsed-DC-ESI, such as the inner diameter of spray capillary tip, spray voltage, and distance between electrode and solution, were optimized based on the mass spectral responses of the amphetamine-type drugs. The optimized ion source conditions included a inner diameter of spray capillary tip of 25 µm, spray voltage of 2 kV, and the distance between electrode and solution of 20 mm. The optimal sample solvent was methanol. The optimized method can achieve simultaneous detection of the four amphetamine-type drugs within 20 s. The linear ranges of amphetamine, methamphetamine, and the two other drugs were 1-25, 1-100, and 1-50 ng/mg, respectively. The limits of detection and quantification of the four drugs in hair were 0.1-0.2 and 1 ng/mg, respectively. All linear correlation coefficients were greater than 0.99, and the average spiked recoveries were 86.6%-114.7%. The intra-day precisions were 4.14%-7.34%, and the inter-day precisions were 3.71%-8.43%. The proposed method was used to screen 2000 samples provided by various testing institutions. A total of five samples were positive for methamphetamine, which is consistent with the results of conventional forensic identification methods. Thus, the developed method can be used for the rapid detection of amphetamine-type drugs.

UPLC/ESI/MS profiling of red algae Galaxaura rugosa extracts and its activity against malaria mosquito vector, Anopheles pharoensis, with reference to Danio rerio and Daphnia magna as bioindicators.

BACKGROUND: Anopheles pharoensis has a major role in transmitting several human diseases, especially malaria, in Egypt?. Controlling Anopheles is considered as an effective strategy to eliminate the spread of malaria worldwide. Galaxaura rugosa is a species of red algae found in tropical to subtropical marine environments. The presence of G. rugosa is indicative of the ecosystem's overall health. The current work aims to investigate UPLC/ESI/MS profile of G. rugosa methanol and petroleum ether extracts and its activity against An. pharoensis and non-target organisms, Danio rerio and Daphnia magna. METHODS: Galaxaura rugosa specimens have been identified using DNA barcoding for the COI gene and verified as G. rugosa. The UPLC/ESI/MS profiling of G. rugosa collected from Egypt was described. The larvicidal and repellent activities of G. rugosa methanol and petroleum ether extracts against An. pharoensis were evaluated, as well as the toxicity of tested extracts on non-target organisms, Dan. rerio and Dap. magna. RESULTS: The UPLC/ESI/MS analysis of methanol and petroleum ether extracts led to the tentative identification of 57 compounds belonging to different phytochemical classes, including flavonoids, tannins, phenolic acids, phenyl propanoids. Larval mortality was recorded at 93.33% and 90.67% at 80 and 35 ppm of methanol and petroleum ether extracts, respectively, while pupal mortality recorded 44.44 and 22.48% at 35 and 30 ppm, respectively. Larval duration was recorded at 5.31 and 5.64 days by methanol and petroleum ether extracts at 80 and 35 ppm, respectively. A decrease in acetylcholinesterase (AChE) level and a promotion in Glutathione-S-transferase (GST) level of An. pharoensis 3rd instar larvae were recorded by tested extracts. The petroleum ether extract was more effective against An. pharoensis starved females than methanol extract. Also, tested extracts recorded LC50 of 1988.8, 1365.1, and 11.65, 14.36 µg/mL against Dan. rerio, and Dap. magna, respectively. CONCLUSIONS: Using red algae derivatives in An. pharoensis control could reduce costs and environmental impact and be harmless to humans and other non-target organisms.

Characterization of Environmental Levels of Pesticide Residues in Household Air and Dust Samples near a Bioenergy Plant Using Treated Seed as Feedstock.

Exposure to neonicotinoid insecticides is associated with adverse human health outcomes. There is environmental contamination in Saunders County, Nebraska, due to the accumulation of fungicides and insecticides from a now-closed ethanol plant using seed corn as stock. A pilot study quantified environmental contamination in nearby houses from residual pesticides by measuring dust and air (indoor/outdoor) concentrations of neonicotinoids and fungicides at the study site (households within two miles of the plant) and control towns (20-30 miles away). Air (SASS® 2300 Wetted-Wall Air Sampler) and surface dust (GHOST wipes with 4 × 4-inch template) samples were collected from eleven study households and six controls. Targeted analysis quantified 13 neonicotinoids, their transformation products and seven fungicides. Sample extracts were concentrated using solid phase extraction (SPE) cartridges, eluted with methanol and evaporated. Residues were re-dissolved in methanol-water (1:4) prior to analysis, with an Acquity H-Class ultraperformance liquid chromatograph (UPLC) and a Xevo triple quadrupole mass spectrometer. We compared differences across chemicals in air and surface dust samples at the study and control sites by dichotomizing concentrations above or below the detection limit, using Fisher's exact test. A relatively higher detection frequency was observed for clothianidin and thiamethoxam at the study site for the surface dust samples, similarly for thiamethoxam in the air samples. Our results suggest airborne contamination (neonicotinoids and fungicides) from the ethanol facility at houses near the pesticide contamination.

Methanolic extract of S. securidaca flowers, leaves, and seeds' antihyperlipidemic effects on high fat diet-induced hyperlipidemia in Wistar rats.

Significant risk factors for atherosclerosis include hyperlipidemia and oxidative stress, which together rank as three of the most significant risk factors for cardiovascular diseases. Securigera securidaca lowers cholesterol levels in diabetic rats' blood. This investigation's objective was to determine how methanolic extracts affected the flowers, leaves, and seeds of plants in rats that were fed a high-fat diet (HFD). Five groups of animals were created (n = 5). A total of 35 days, divided into two intervals, were used for the study. Rats received HFD during the first 15-day interval, while during the second 20-day interval, they also received extracts or the Atorvastatin reference drug. The extract of seeds has a high phenol content as well as DPPH radical antioxidant activity. Extracts were given at a dose of 200 mg/kg; p.o. Methanolic treatment of S. securidaca flowers, leaves, and seeds in HFD-induced hyperlipidemic rats resulted in significant reductions in total cholesterol, triglycerides, LDLC, and VLDL-C levels. HDL-C levels increased significantly because of the leaves. While in hyperlipidemic rats, seeds significantly reduced the activities of the enzymes ALT and ALP. The findings showed that, to a certain extent, seeds, flowers, and leaves may have benefits in reducing hyperlipidemia brought on by HFD in terms of lipid profiles and liver function enzymes. The findings of this study indicate a promising application prospect, but more research is needed to determine the exact mechanism of these novel compounds as antihyperlipidemic agents and to clarify their potential combination effect with synthetic drugs such as Atorvastatin. Combinations can reduce the dose of chemical medications required, which lowers the risk of side effects.

Characterizing VOCs emissions of coal chemical enterprise in China: a case study in five coal chemical enterprises.

Coal chemical-induced climate change has become a global concern. However, the dearth of comprehensive case studies and fundamental data has obstructed the accurate quantification of volatile organic compounds (VOCs) emissions. This has failed to equip coal chemical industries with the necessary guidelines to implement effective emission reduction strategies. In response to this, the present study meticulously examined and contrasted the VOCs emissions from five distinct coal chemical enterprises in China. This was achieved through the application of life cycle assessment (LCA), a tool used to discern the primary factors influencing VOCs emissions and to identify potential avenues for VOCs emissions reduction. The analysis revealed that BT exhibited the highest emission intensity (5.58E-04 tons/ton), followed by ED (4.89E-04 tons/ton), YL (4.23E-04 tons/ton), XJ (2.94E-04 tons/ton), and SM (1.74E-04 tons/ton). Among these enterprises, coal-to-olefins enterprises predominantly discharged VOCs via sewage treatment (average 69.12%), while coal-to-methanol enterprises primarily emitted VOCs during circulating water cooling (40.02%). In coal-to-oil enterprises, storage and blending emerged as the principal source of VOCs emissions (56.83%). As a result, this study advocates that coal chemical enterprises concentrate on curbing VOCs emissions from highly concentrated wastewater, regulating the concentration of purgeable organic carbon in circulating water cooling systems, and instituting effective treatment methods for methanol storage tank emissions. These findings proffer invaluable insights for devising VOCs control measures in regions affected by intensive coal chemical production.

Phytochemical analysis, antioxidant, and antimicrobial activities of Jordanian Pomegranate peels.

Pomegranate (Punica granatum) peels have shown numerous health benefits such as antioxidant, anti-inflammatory, and antimicrobial activities. These health activities are owed to the unique phytochemical components present in pomegranate peels. Variations in the pomegranate cultivar, geographical region, and extraction methods significantly affect the phytochemical composition and concentrations of pomegranate fruits and their peels, hence their health outcomes. Therefore, this study aimed to examine the phytochemical contents of pomegranate peels of Jordanian origin and their antioxidant and antimicrobial activities. Among the 6 extracts of pomegranate peels tested, the ethanol extract exhibited the highest total phenolic content (TPC = 297.70 ± 1.73 mg GAE/g DW), highest total flavonoids content (TFC = 116.08 ± 3.46 mg RE/g DW), highest hydrolyzable tannins (HT) contents (688.50 ± 3.54 mg TE/g DW). Whereas the highest condensed tannins (CT) content was found in both the ethanol (13.87 ± 0.58 mg CE/g DW) and methanol (13.84 ± 0.55 mg CE/g DW) extracts. For the antioxidant activities, the water extract of pomegranate peels displayed the highest inhibitory effect on DPPH radicals (9.43 ± 0.06 µmole TE/g DW), while for the ABTS+ assay the methanol and ethanol extracts exhibited the highest activities of 11.09 ± 0.02 and 11.09 ± 0.06 µmole TE/g DW, respectively. For the FRAP assay, the aqueous methanol extract exhibited the highest reducing activity (1.60 ± 0.09 mmole Fe (II)/g DW). As for the antimicrobial activities of various extracts of pomegranate peels, the highest antimicrobial activity against Micrococcus luteus was achieved by the ethanol extract (MIC = 6.25 mg/mL), whereas the lowest antimicrobial activity was observed against Candida krusei using the methanol extract (MIC = 100 mg/mL). These results indicate that pomegranate peels of Jordanian origin are rich in phytochemical content and exhibited strong antioxidant and antimicrobial activities making these agroindustrial by-products potential candidates for various medical applications and possible safe sources for important bioactive components.

LC-MS/MS and GC-MS profiling, antioxidant, enzyme inhibition, and antiproliferative activities of Thymus leucostomus H ausskn. & V elen. extracts.

The chemical composition as well as antioxidant, antiproliferative, and enzyme inhibition activities of extracts from aerial parts of Thymus leucostomus H ausskn. & V elen. obtained with hexane, methanol, and water were evaluated. Results showed that the methanol extract had significantly (p < 0.05) the highest total phenolic content (TPC; 107.80 mg GAE/g) and total flavonoids content (TFC; 25.21 mg RE/g) followed by the aqueous extract (102.72 mg GAE/g and 20.88 mg RE/g, respectively). LC-MS/MS-guided profiling of the three extracts revealed that rosmarinic acid (34.8%), hesperetin (42.9%), and linoleic acid (18%) were the dominant compounds in the methanol, aqueous and hexane extracts, respectively. GC-MS analysis of the hexane extract showed that É£-sitosterol (29.9%) was the major constituent. The methanol extract displayed significantly (p < 0.05) the highest Cu++ , Fe+++ , and Mo(VI) ions scavenging and reducing properties while the aqueous extract exerted significantly (p < 0.05) the highest metal chelating power (42.51 mg EDTAE/g). Both the hexane and methanol extracts effectively inhibited the acetylcholinesterase enzyme (2.63 and 2.65 mg GALAE/g, respectively) while the former extract exerted significantly (p < 0.05) the highest butyrylcholinesterase (2.32 mg GALAE/g), tyrosinase (19.73 mg KAE/g), and amylase (1.16 mmol ACAE/g) inhibition capacity. The aqueous extract exhibited the best glucosidase inhibition property (0.49 mmol ACAE/g). The methanol and hexane extracts exerted a higher cytotoxic effect on HT-29 (IC50 : 8.12 µg/mL) and HeLa (IC50 = 8.08 µg/mL) cells, respectively. In conclusion, these results provide valuable insight into the potential use of T. leucostomus bioactive extracts in different pharmaceutical applications.

Determination of licit and illicit drugs and metabolites in human sweat by liquid chromatography-tandem mass spectrometry.

A liquid chromatography-tandem mass spectrometry screening method in sweat was developed for the simultaneous determination of three licit drugs (nicotine, paracetamol, and caffeine); four illicit drugs (cocaine, ketamine, 25I-NBOMe and methamphetamine) and two metabolites (benzoylecgonine and cotinine). Target drugs were liberated from sweat patches with pH 5 sodium acetate buffer and further purified by solid phase extraction (SPE) utilising Strata-X-Drug B cartridges. Optimal solvent constituents for SPE organic wash and elution were 70% v/v methanol in deionised water and 5% v/v ammonium hydroxide in methanol respectively. Chromatographic separation was achieved using a superficially porous particle C18 column with gradient elution, using (A) 0.1% formic acid in water and (B) acetonitrile as mobile phase constituents. Target drugs were identified using a combination of retention time, and the ion ratios for two precursor-product ion transitions for each analyte monitored in multiple reaction monitoring (MRM) mode. The method was linear for all target drugs from 1.0-150.0 ng mL-1 with corresponding limits of quantitation of 1.0 ng mL-1. Limits of detection were found to range from 0.1-0.6 ng per patch. The method was subsequently applied to the analysis of sweat samples from five male and four female participants aged 20-25 years. Sweat was collected from two areas (right forearm and left thigh) using protected layers of gauze. All eighteen patches tested positive for at least one target analyte. The results of this study not only show a multi-substance screening method was achieved but also that sweat patches can be used to indicate an individual's drug use. Therefore, they can provide an alternative non-invasive technique for forensic applications.

Comparative Analysis of Chemical Composition of Zanthoxylum myriacanthum Branches and Leaves by GC-MS and UPLC-Q-Orbitrap HRMS, and Evaluation of Their Antioxidant Activities.

Zanthoxylum myriacanthum Wall. ex Hook. f., a plant belonging to the Rutaceae family and the Zanthoxylum genus, is extensively utilized for its medicinal properties and as a culinary seasoning in China and Southeast Asian countries. However, the chemical composition and biological activities of Z. myriacanthum branches and leaves remain insufficiently explored. In this study, the volatile and non-volatile components of Z. myriacanthum branches and leaves were analyzed using GC-MS and UPLC-Q-Orbitrap HRMS techniques. A total of 78 volatile compounds and 66 non-volatile compounds were identified. The volatile compounds were predominantly terpenoids and aliphatic compounds, while the non-volatile compounds were primarily flavonoids and alkaloids. The branches contained 52 volatile compounds and 33 non-volatile compounds, whereas the leaves contained 48 volatile compounds and 40 non-volatile compounds. The antioxidant activities of the methanol extracts from Z. myriacanthum branches and leaves were evaluated using ABTS and DPPH free-radical-scavenging assays, both of which demonstrated certain antioxidant activity. The methanol extract of leaves demonstrated significantly higher antioxidant activity compared to that of the branches, possibly due to the higher presence of flavonoids and phenols in the leaves, with IC50 values of 7.12 ± 0.257 µg/mL and 1.22 × 102 ± 5.01 µg/mL for ABTS and DPPH, respectively. These findings enhance our understanding of the chemical composition and antioxidant potential of Z. myriacanthum. The plant holds promise as a natural source of antioxidants for applications in pharmaceuticals, cosmetics, and functional foods. Further research can explore its broader biological activities and potential applications.

In-situ analysis of trace components in proportioning distilled spirits using Raman integrating sphere spectroscopy.

In situ and on-site analysis of trace components, such as methanol and ethyl acetate, in distilled spirits poses significant challenges. In this study, we have proposed a simple, yet effective and rapid approach that combines Raman spectroscopy with Raman integrating sphere technology to accurately detect trace constituents in distilled spirits. An external standard method to effectively separate overlapping Raman peaks from different substances are developed. Experimental results demonstrate that with an exposure time of 180 s under normal temperature and pressure, the detection limits for methanol, acetic acid, and ethyl acetate in proportioned distilled spirits are below 0.1 g/L. Importantly, the detection limit of methanol and acetic acid remains unaffected by the concentration of distilled spirits and the types of trace substances. Notably, the concentration of trace solute exhibits a highly linear relationship with its corresponding Raman intensity, offering a reliable probe for identifying unknown components in distilled spirits.

Coal fly ash application as an eco-friendly approach for modulating the growth, yield, and biochemical constituents of Withania somnifera L. plants.

The solid waste known as fly ash, which is produced when coal is burned in thermal power plants, is sustainably used in agriculture. It is an excellent soil supplement for plant growth and development since it contains some desired nutrients (macro and micro), as well as being porous. The present study was done to evaluate the effect of different fly ash levels on Withania somnifera. The present study aimed to assess the impact of various fly ash (FA) concentrations on growth, yield, photosynthetic pigments, biochemical parameters, and cell viability of W. somnifera. The results showed that FA enhanced physical and chemical properties of soil like pH, electric conductivity, porosity, water-holding capacity, and nutrients. The low doses of FA-amended soil (15%) significantly increased the shoot length (36%), root length (24.5%), fresh weight of shoots and roots (107.8 and 50.6%), dry weight of shoots and roots (61.9 and 47.1%), number of fruits (70.4%), carotenoid (43%), total chlorophyll (44.3%), relative water content (109.3%), protein content (20.4%), proline content (110.3%), total phenols (116.1%), nitrogen (20.3%), phosphorus (16.9%), and potassium (26.4%). On the other hand, the higher doses, i.e., 25% of fly ash showed a negative effect on all the above parameters and induced oxidative stress by increasing lipid peroxidation (33.1%) and hydrogen peroxide (102.0%) and improving the activities of antioxidant enzymes and osmolytes. Compared to the control plants, the plants growing in soil enriched with 15 and 25% fly ash had larger stomata pores when examined using a scanning electron microscope. In addition, according to a confocal microscopic analysis of the roots of W. somnifera, higher fly ash concentrations caused membrane damage, as evidenced by an increase in the number of stained nuclei. Moreover, several functional groups and peaks of the biomolecules represented in the control and 15% of fly ash were alcohols, phenols, allenes, ketenes, isocynates, and hydrocarbons. Gas chromatography-mass spectrometry analysis of the methanol extract of W. somnifera leaves cultivated in soil amended with 15% fly ash shows the presence of 47 bioactive compounds. The most abundant compounds in the methanol extract were cis-9-hexadecenal (22.33%), n-hexadecanoic acid (9.68%), cinnamic acid (6.37%), glycidyl oleate (3.88%), nonanoic acid (3.48%), and pyranone (3.57%). The lower concentrations of FA (15%) can be used to enhance plant growth and lower the accumulation of FA that results in environmental pollution.

Exploitations of Schiff's test and iodoform test for an effective quality assessment of alcohol-based hand sanitizers.

In the period of the corona virus disease 2019 (COVID-19) outbreak, an alcohol-based hand sanitizer is one of the most in-demand products for disinfection purposes. Two major concerns are adulteration of methanol, which causes toxicity to human health, and the concentration of legal alcohol in hand sanitizers due to their effect on antivirus. In this work, the first report of the entire quality assessment of alcohol-based hand sanitizers in terms of detection of methanol adulteration and quantification of ethanol is presented. Detection of adulterated methanol is carried out based on Schiff's reagent after the oxidation of methanol to formaldehyde, giving a bluish-purple solution to detect at 591 nm. In cases where a colorless solution is observed, an iodoform reaction with turbidimetric detection is then performed for quantitative analysis of legal alcohol (ethanol or isopropanol). To comply with the regulation of quality assessment of alcohol-based hand sanitizers, a regulation chart with four safety zones is also presented, employing a combination of two developed tests. The coordinates of a point (x, y) obtained from the two tests are extrapolated to the safety zone in the regulation chart. The regulation chart also showed consistency of analytical results as compared with the gas chromatography-flame ionization detector.