Imaging Bunyavirus Infections by Transmission Electron Microscopy: Conventional Sample Preparation vs High-Pressure Freezing and Freeze-Substitution.

Transmission electron microscopy significantly contributed to unveil the course of virus entry, replication, morphogenesis, and egress. For these studies, the most widely used approach is imaging ultrathin sections of virus-infected cells embedded in a plastic resin that is transparent to electrons. Before infiltration in a resin, cells must be processed to stabilize their components under the observation conditions in an electron microscope, such as high vacuum and irradiation with electrons. For conventional sample preparation, chemical fixation and dehydration are followed by infiltration in the resin and polymerization to produce a hard block that can be sectioned with an ultramicrotome. Another method that provides a superior preservation of cell components is high-pressure freezing (HPF) followed by freeze substitution (FS) before resin infiltration and polymerization. This chapter describes both procedures with cells infected with Bunyamwera virus (BUNV), a well characterized member of the Bunyavirales, and compares the morphological details of different viral structures imaged in the two types of samples. Advantages, disadvantages, and applications of conventional processing and HPF/FS are also presented and discussed.

PEGylated Micro/Nanoparticles Based on Biodegradable Poly(Ester Amides): Preparation and Study of the Core-Shell Structure by Synchrotron Radiation-Based FTIR Microspectroscopy and Electron Microscopy.

Surface modification of drug-loaded particles with polyethylene glycol (PEG) chains is a powerful tool that promotes better transport of therapeutic agents, provides stability, and avoids their detection by the immune system. In this study, we used a new approach to synthesize a biodegradable poly(ester amide) (PEA) and PEGylating surfactant. These were employed to fabricate micro/nanoparticles with a core-shell structure. Nanoparticle (NP)-protein interactions and self-assembling were subsequently studied by synchrotron radiation-based FTIR microspectroscopy (SR-FTIRM) and transmission electron microscopy (TEM) techniques. The core-shell structure was identified using IR absorption bands of characteristic chemical groups. Specifically, the stretching absorption band of the secondary amino group (3300 cm-1) allowed us to identify the poly(ester amide) core, while the band at 1105 cm-1 (C-O-C vibration) was useful to demonstrate the shell structure based on PEG chains. By integration of absorption bands, a 2D intensity map of the particle was built to show a core-shell structure, which was further supported by TEM images.

Placental Protein 13 and Syncytiotrophoblast Basement Membrane Ultrastructures in Preeclampsia.

Background and Objectives: Preeclampsia has been linked to an inflammatory response that may be brought on by endothelial cell dysfunction. This paper investigates the pathomechanism of syncytiotrophoblast basement membrane (STBM) damage and Placental Protein 13 (PP13) release, which may have a role in systemic endothelial dysfunction in preeclampsia. Materials and Methods: This comparative cross-sectional study involves 54 preeclampsia patients (27 early-onset preeclampsia and 27 late-onset preeclampsia) and 27 pregnant women with normal blood pressure. An enzyme-linked immunosorbent assay was performed to evaluate maternal blood levels of PP13. Following birth, a portion of the placenta was collected for transmission electron microscope (TEM) and immunohistochemical (IHC) analysis. The data were analyzed using STATA version 15. Results: PP13 expression in the placental syncytiotrophoblast was significantly lower in the early-onset preeclampsia, compared to late-onset preeclampsia and normotensive pregnancy, group (p < 0.001). In contrast, serum PP13 levels were found to be the highest in the early-onset preeclampsia group, although no significant difference were found in mean maternal serum levels of PP13 between the three groups. The decreased PP13 expression in placental syncytiotrophoblast can be attributed to the greater extent of damage in the STBM in early-onset preeclampsia that leads to the release of a larger amount of PP13 into maternal circulation. The hypothesis aligns with the TEM analysis results. Preeclamptic pregnancies showed placental syncytiotrophoblast aponeurosis, whereas normotensive pregnancies did not. Placental lesions and STBM shedding were found to be more pronounced in early-onset preeclampsia compared to late-onset preeclampsia. Conclusions: PP13 and STBM damage may play a role in systemic endothelial dysfunction in preeclampsia.

Classification of rotation-invariant biomedical images using equivariant neural networks.

Transmission electron microscopy (TEM) is an imaging technique used to visualize and analyze nano-sized structures and objects such as virus particles. Light microscopy can be used to diagnose diseases or characterize e.g. blood cells. Since samples under microscopes exhibit certain symmetries, such as global rotation invariance, equivariant neural networks are presumed to be useful. In this study, a baseline convolutional neural network is constructed in the form of the commonly used VGG16 classifier. Thereafter, it is modified to be equivariant to the p4 symmetry group of rotations of multiples of 90° using group convolutions. This yields a number of benefits on a TEM virus dataset, including higher top validation set accuracy by on average 7.6% and faster convergence during training by on average 23.1% of that of the baseline. Similarly, when training and testing on images of blood cells, the convergence time for the equivariant neural network is 7.9% of that of the baseline. From this it is concluded that augmentation strategies for rotation can be skipped. Furthermore, when modelling the accuracy versus amount of TEM virus training data with a power law, the equivariant network has a slope of - 0.43 compared to - 0.26 of the baseline. Thus the equivariant network learns faster than the baseline when more training data is added. This study extends previous research on equivariant neural networks applied to images which exhibit symmetries to isometric transformations.

Preparing Retinal Organoid Samples for Transmission Electron Microscopy.

Retinal organoids (ROs) are a three-dimensional culture system mimicking human retinal features that have differentiated from induced pluripotent stem cells (iPSCs) under specific conditions. Synapse development and maturation in ROs have been studied immunocytochemically and functionally. However, the direct evidence of the synaptic contact ultrastructure is limited, containing both special ribbon synapses and conventional chemical synapses. Transmission electron microscopy (TEM) is characterized by high resolution and a respectable history elucidating retinal development and synapse maturation in humans and various species. It is a powerful tool to explore synaptic structure in ROs and is widely used in the research field of ROs. Therefore, to better explore the structure of RO synaptic contacts at the nanoscale and obtain high-quality microscopic evidence, we developed a simple and repeatable method of RO TEM sample preparation. This paper describes the protocol, reagents used, and detailed steps, including RO fixation preparation, post fixation, embedding, and visualization.

Zero-shot denoising of microscopy images recorded at high-resolution limits.

Conventional and electron microscopy visualize structures in the micrometer to nanometer range, and such visualizations contribute decisively to our understanding of biological processes. Due to different factors in recording processes, microscopy images are subject to noise. Especially at their respective resolution limits, a high degree of noise can negatively effect both image interpretation by experts and further automated processing. However, the deteriorating effects of strong noise can be alleviated to a large extend by image enhancement algorithms. Because of the inherent high noise, a requirement for such algorithms is their applicability directly to noisy images or, in the extreme case, to just a single noisy image without a priori noise level information (referred to as blind zero-shot setting). This work investigates blind zero-shot algorithms for microscopy image denoising. The strategies for denoising applied by the investigated approaches include: filtering methods, recent feed-forward neural networks which were amended to be trainable on noisy images, and recent probabilistic generative models. As datasets we consider transmission electron microscopy images including images of SARS-CoV-2 viruses and fluorescence microscopy images. A natural goal of denoising algorithms is to simultaneously reduce noise while preserving the original image features, e.g., the sharpness of structures. However, in practice, a tradeoff between both aspects often has to be found. Our performance evaluations, therefore, focus not only on noise removal but set noise removal in relation to a metric which is instructive about sharpness. For all considered approaches, we numerically investigate their performance, report their denoising/sharpness tradeoff on different images, and discuss future developments. We observe that, depending on the data, the different algorithms can provide significant advantages or disadvantages in terms of their noise removal vs. sharpness preservation capabilities, which may be very relevant for different virological applications, e.g., virological analysis or image segmentation.

CLEM, a universal tool for analyzing structural organization in thylakoid membranes.

Chlorophyll (Chl) plays a crucial role in photosynthesis, functioning as a photosensitizer. As an integral component of this process, energy absorbed by this pigment is partly emitted as red fluorescence. This signal can be readily imaged by fluorescence microscopy and provides a visualization of photosynthetic activity. However, due to limited resolution, signals cannot be assigned to specific subcellular/organellar membrane structures. By correlating fluorescence micrographs with transmission electron microscopy, researchers can identify sub-cellular compartments and membranes, enabling the monitoring of Chl distribution within thylakoid membrane substructures in cyanobacteria, algae, and higher plant single cells. Here, we describe a simple and effective protocol for correlative light-electron microscopy (CLEM) based on the autofluorescence of Chl and demonstrate its application to selected photosynthetic model organisms. Our findings illustrate the potential of this technique to identify areas of high Chl concentration and photochemical activity, such as grana regions in vascular plants, by mapping stacked thylakoids.

Validation of electron-microscopy maps using solution small-angle X-ray scattering.

The determination of the atomic resolution structure of biomacromolecules is essential for understanding details of their function. Traditionally, such a structure determination has been performed with crystallographic or nuclear resonance methods, but during the last decade, cryogenic transmission electron microscopy (cryo-TEM) has become an equally important tool. As the blotting and flash-freezing of the samples can induce conformational changes, external validation tools are required to ensure that the vitrified samples are representative of the solution. Although many validation tools have already been developed, most of them rely on fully resolved atomic models, which prevents early screening of the cryo-TEM maps. Here, a novel and automated method for performing such a validation utilizing small-angle X-ray scattering measurements, publicly available through the new software package AUSAXS, is introduced and implemented. The method has been tested on both simulated and experimental data, where it was shown to work remarkably well as a validation tool. The method provides a dummy atomic model derived from the EM map which best represents the solution structure.

New Avenues for Capturing Mineralization Events at Biomaterial Interfaces with Liquid-Transmission Electron Microscopy.

Liquid-transmission electron microscopy (liquid-TEM) provides exciting potential for capturing mineralization events at biomaterial interfaces, though it is largely unexplored. To address this, we established a unique approach to visualize calcium phosphate (CaP)-titanium (Ti) interfacial mineralization events by combining the nanofabrication of Ti lamellae by focused ion beam with in situ liquid-TEM. Multiphasic CaP particles were observed to nucleate, adhere, and form different assemblies onto and adjacent to Ti lamellae. Here, we discuss new approaches for exploring the interaction between biomaterials and liquids at the nanoscale. Driving this technology is crucial for understanding and controlling biomineralization to improve implant osseointegration and direct new pathways for mineralized tissue disease treatment in the future.

Electron Microscopy of Cryptococcus neoformans: Processing Challenges to Avoid Artifacts.

This chapter describes methodological details for preparing specimens of Cryptococcus neoformans (although it can be applied to any species of the genus) and their subsequent analysis by scanning and transmission electron microscopy. Adaptations to conventional protocols for better preservation of the sample, as well as to avoid artifacts, are presented. The protocols may be used to examine both the surface ultrastructure and the interior of this pathogenic fungus in detail.

Dystrophic calcinosis: structural and morphological composition, and evaluation of ethylenediaminetetraacetic acid ('EDTA') for potential local treatment.

BACKGROUND: To perform a detailed morphological analysis of the inorganic portion of two different clinical presentations of calcium-based deposits retrieved from subjects with SSc and identify a chemical dissolution of these deposits suitable for clinical use. METHODS: Chemical analysis using Fourier Transform IR spectroscopy ('FTIR'), Raman microscopy, Powder X-Ray Diffraction ('PXRD'), and Transmission Electron Microscopy ('TEM') was undertaken of two distinct types of calcinosis deposits: paste and stone. Calcinosis sample titration with ethylenediaminetetraacetic acid ('EDTA') assessed the concentration at which the EDTA dissolved the calcinosis deposits in vitro. RESULTS: FTIR spectra of the samples displayed peaks characteristic of hydroxyapatite, where signals attributable to the phosphate and carbonate ions were all identified. Polymorph characterization using Raman spectra were identical to a hydroxyapatite reference while the PXRD and electron diffraction patterns conclusively identified the mineral present as hydroxyapatite. TEM analysis showed differences of morphology between the samples. Rounded particles from stone samples were up to a few micron in size, while needle-like crystals from paste samples reached up to 0.5 µm in length. Calcium phosphate deposits were effectively dissolved with 3% aqueous solutions of EDTA, in vitro. Complete dissolution of both types of deposit was achieved in approximately 30 min using a molar ratio of EDTA/HAp of ≈ 300. CONCLUSIONS: Stone and paste calcium-based deposits both comprise hydroxyapatite, but the constituent crystals vary in size and morphology. Hydroxyapatite is the only crystalline polymorph present in the SSc-related calcinosis deposits. Hydroxyapatite can be dissolved in vitro using a dosage of EDTA considered safe for clinical application. Further research is required to establish the optimal medium to develop the medical product, determine the protocol for clinical application, and to assess the effectiveness of EDTA for local treatment of dystrophic calcinosis.

Novel Transmission Electron Microscopic Method to Quantify Protein Clustering on the Cell Surface.

The cell surface distribution patterns (clustering) of membrane proteins have been widely investigated in cell biology. Here we describe a novel transmission electron microscopic (TEM) protocol designed to improve the quality of information obtained about the protein distribution patterns detected. This novel method makes it possible to study the clustering of all transmembrane proteins on one half of the cytoplasmic membrane of a whole cell. To achieve better imaging, we combine various methods, including critical-point drying, fixation of gold beads with a carbon layer, and a newly developed chemical thinning method. In addition, in our image-processing algorithm, we implemented pair correlation and pair cross-correlation functions, providing more details and better quantitative accuracy in characterizing the size and numbers of possible protein clusters. © 2024 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Sample preparation and transmission electron micrography Alternate Protocol: Direct cell labeling for transmission electron micrography Basic Protocol 2: Analysis of TEM images to detect immunogold-labeled proteins.

How to apply the broad toolbox of correlative light and electron microscopy to address a specific biological question.

Correlative light and electron microscopy (CLEM) is an approach that combines the strength of multiple imaging techniques to obtain complementary information about a given specimen. The "toolbox" for CLEM is broad, making it sometimes difficult to choose an appropriate approach for a given biological question. In this chapter, we provide experimental details for three CLEM approaches that can help the interested reader in designing a personalized CLEM strategy for obtaining ultrastructural data by using transmission electron microscopy (TEM). First, we describe chemical fixation of cells grown on a solid support (broadest approach). Second, we apply high-pressure freezing/freeze substitution to describe cellular ultrastructure (cryo-immobilization approach). Third, we give a protocol for a ultrastructural labeling by immuno-electron microscopy (immuno-EM approach). In addition, we also describe how to overlay fluorescence and electron microscopy images, an approach that is applicable to each of the reported different CLEM strategies. Here we provide step-by step descriptions prior to discussing possible technical problems and variations of these three general schemes to suit different models or different biological questions. This chapter is written for electron microscopists that are new to CLEM and unsure how to begin. Therefore, our protocols are meant to provide basic information with further references that should help the reader get started with applying a tailored strategy for a specific CLEM experiment.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV2) culture and sample preparation for correlative light electron microscopy.

Correlative Light Electron Microscopy (CLEM) is a powerful technique to investigate the ultrastructure of specific cells and organelles at sub-cellular resolution. Transmission Electron Microscopy (TEM) is particularly useful to the field of virology, given the small size of the virion, which is below the limit of detection by light microscopy. Furthermore, viral infection results in the rearrangement of host organelles to form spatially defined compartments that facilitate the replication of viruses. With the emergence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), there has been great interest to study the viral replication complex using CLEM. In this chapter we provide an exemplary workflow describing the safe preparation and processing of cells grown on coverslips and infected with SARS-CoV-2.

Some tips and tricks for a Correlative Light Electron Microscopy workflow using stable expression of fluorescent proteins.

Correlative Light Electron Microscopy (CLEM) encompasses a wide range of experimental approaches with different degrees of complexity and technical challenges where the attributes of both light and electron microscopy are combined in a single experiment. Although the biological question always determines what technology is the most appropriate, we generally set out to apply the simplest workflow possible. For 2D cell cultures expressing fluorescently tagged molecules, we report on a simple and very powerful CLEM approach by using gridded finder imaging dishes. We first determine the gross localization of the fluorescence using light microscopy and subsequently we retrace the origin/localization of the fluorescence by projecting it onto the ultrastructural reference space obtained by transmission electron microscopy (TEM). Here we describe this workflow and highlight some basic principles of the sample preparation for such a simple CLEM experiment. We will specifically focus on the steps following the resin embedding for TEM and the introduction of the sample in the electron microscope.

Some Guiding Principles for a "Simple" Correlative Light Electron Microscopy Experiment.

In recent years, Correlative Multimodal Imaging (CMI) has become an "en vogue" technique and a bit of a buzzword. It entails combining information from different imaging modalities to extract more information from a sample that would otherwise not be possible from each individual technique. The best established CMI technology is correlative light and electron microscopy (CLEM), which applies light and electron microscopy on the exact same sample/structure. In general, it entails the detection of fluorescently tagged proteins or structures by light microscopy and subsequently their relative intracellular localization is determined with nanometer resolution using transmission electron microscopy (TEM). Here, we describe the different steps involved in a "simple" CLEM approach. We describe the overall workflow, instrumentation, and basic principles of sample preparation for a CLEM experiment exploiting stable expression of fluorescent proteins.

Investigating Epidermal Growth Factor Receptor Trafficking with High-Resolution Enzymatic Protein-Tagging and Transmission Electron Microscopy.

Enzymatic ascorbate peroxidase (APEX) tagging allows for high-resolution, three-dimensional protein distribution analyses in cells and tissues. This chapter describes the application of APEX-tagging to visualize the trafficking of the epidermal growth factor receptor (EGFR) during epidermal growth factor-mediated receptor activation. Here, we describe the preparation of cells, methods to validate the stimulation of the EGFR, and visualization of the APEX-resolved distribution of the EGFR in the transmission electron microscope.

Effect of plate orientation on apparent thickness of mineral plates by transmission electron microscopy.

PURPOSE: Transmission electron microscopy (TEM) is widely used to study the ultrastructure of bone. The mineral of bone occurs as polycrystalline mineral plates about 3 to 6 nm in thickness. A problem in using TEM to make quantitative analyses of bone is that the orientation of the plates with respect to the plane of the section being imaged is expected to affect their apparent thickness. The purpose of this study was to test if this was true, if the apparent thickness of plates changed substantially as a result of tilt of the section. METHODS: We prepared TEM sections of samples of cortical human bone by ion beam milling, orienting one section parallel to the collagen fibril axes and one perpendicular to them. We obtained TEM bright field and HAADF images of these sections, tilting the sections up to ± 20° at 2° intervals and measuring the apparent thickness of individual mineral platelets at each angle of tilt. RESULTS: Thickness appears to double as section is tilted ± 20°. True thickness of plates is determined by tilting the section along an axis parallel to the plate orientation and determining the minimum apparent thickness. However, as plates are tilted away from minimum-thickness orientation, they become less well-resolved, disappearing when tilted more than 20°. We therefore also measured apparent thickness of only the darkest (most electron scattering) plate images in an untilted section and obtained the same average thickness as that obtained by tilting. CONCLUSION: We conclude that tilting of the section is not necessary to obtain an accurate measurement of the thickness of mineral plates.

A correlated light and electron microscopy approach to study the subcellular localization of phosphorylated vimentin in human lung tissue.

Correlative microscopy is an important approach for bridging the resolution gap between fluorescence light and electron microscopy. Here, we describe a fast and simple method for correlative immunofluorescence and immunogold labeling on the same section to elucidate the localization of phosphorylated vimentin (P-Vim), a robust feature of pulmonary vascular remodeling in cells of human lung small arteries. The lung is a complex, soft and difficult tissue to prepare for transmission electron microscopy (TEM). Detailing the molecular composition of small pulmonary arteries (<500µm) would be of great significance for research and diagnostics. Using the classical methods of immunochemistry (either hydrophilic resin or thin cryosections), is difficult to locate small arteries for analysis by TEM. To address this problem and to observe the same structures by both light and electron microscopy, correlative microscopy is a reliable approach. Immunofluorescence enables us to know the distribution of P-Vim in cells but does not provide ultrastructural detail on its localization. Labeled structures selected by fluorescence microscope can be identified and further analyzed by TEM at high resolution. With our method, the morphology of the arteries is well preserved, enabling the localization of P-Vim inside pulmonary endothelial cells. By applying this approach, fluorescent signals can be directly correlated to the corresponding subcellular structures in areas of interest.

High-Resolution Cryo-Electron Microscopy Structure Determination of Haemophilus influenzae Tellurite-Resistance Protein A via 200 kV Transmission Electron Microscopy.

Membrane proteins constitute about 20% of the human proteome and play crucial roles in cellular functions. However, a complete understanding of their structure and function is limited by their hydrophobic nature, which poses significant challenges in purification and stabilization. Detergents, essential in the isolation process, risk destabilizing or altering the proteins' native conformations, thus affecting stability and functionality. This study leverages single-particle cryo-electron microscopy to elucidate the structural nuances of membrane proteins, focusing on the SLAC1 bacterial homolog from Haemophilus influenzae (HiTehA) purified with diverse detergents, including n-dodecyl ß-D-maltopyranoside (DDM), glycodiosgenin (GDN), ß-D-octyl-glucoside (OG), and lauryl maltose neopentyl glycol (LMNG). This research not only contributes to the understanding of membrane protein structures but also addresses detergent effects on protein purification. By showcasing that the overall structural integrity of the channel is preserved, our study underscores the intricate interplay between proteins and detergents, offering insightful implications for drug design and membrane biology.