Efficacy of denervation for osteoarthritis in the proximal interphalangeal joint (DOP): protocol of a randomized controlled trial.

BACKGROUND: Osteoarthritis (OA) contributes increasingly to disability worldwide. There is ample high-quality research on the treatment of knee and hip OA, whereas research on surgical and non-surgical treatment in hand OA is sparse. Limited evidence suggests that education and exercise may improve pain, function, stiffness, and grip strength in hand OA. The established surgical options in hand OA have disadvantages. Prostheses preserve motion but have a high complication rate, whereas fusions decrease function due to limited movement. There is an unmet need for high-quality research on treatment options for hand OA and a need for the development of effective and safe movement-sparing therapies. This study aims to compare the effects of a motion-preserving surgical treatment (denervation of the proximal interphalangeal (PIP) joint) with a patient education and exercise program on patient-reported outcomes and objective function in painful PIP OA. METHODS: In this parallel-group, two-armed, randomized, controlled superiority trial (RCT), 90 participants are assigned to surgical PIP joint denervation or education and exercise. Pain on load 1 year after intervention is the primary outcome measure. Secondary outcome measures include pain at rest, Patient-Rated Wrist and Hand Evaluation (PRWHE), HQ8 score, EQ5D-5L, objective physical function, complications, two-point discrimination, Mini Sollerman, consumption of analgesics, and the need for further surgery. Assessments are performed at baseline, 3 and 6 months, and 1 year after intervention. DISCUSSION: There are no previous RCTs comparing surgical and non-surgical treatment in PIP OA. If patient education plus exercise or PIP denervation improve function, these treatments could be implemented as first-line treatment options in PIP OA. However, if denervation does not achieve better results than non-surgical treatment, it is not justified to use in PIP OA. TRIAL REGISTRATION: Prospectively registered in ClinicalTrials.gov (NCT05980793) on 8 August 2023. URL https://classic. CLINICALTRIALS: gov/ct2/show/NCT05980793 .

Feasibility of using diamond-like carbon films in total joint replacements: a review.

Diamond-like Carbon (DLC) has been used as a coating material of choice for a variety of technological applications owing to its favorable bio-tribo-thermo-mechanical characteristics. Here, the possibility of bringing DLC into orthopedic joint implants is examined. With ever increasing number of patients suffering from osteoarthritis as well as with the ingress of the osteoarthritic joints' malaise into younger and more active demographics, there is a pressing need to augment the performance and integrity of conventional total joint replacements (TJRs). Contemporary joint replacement devices use metal-on-polymer articulations to restore function to worn, damaged or diseased cartilage. The wear of polymeric components has been addressed using crosslinking and antioxidants; however, in the context of the metallic components, complications pertaining to corrosion and metal ion release inside the body still persist. Through this review article, we explore the use of DLC coatings on metallic bearing surfaces and elucidate why this technology might be a viable solution for ongoing electrochemical challenges in orthopedics. The different characteristics of DLC coatings and their feasibility in TJRs are examined through assessment of tribo-material characterization methods. A holistic characterization of the coating-substrate interface and the wear performance of such systems are discussed. As with all biomaterials used in TJRs, we need mindful consideration of potential in-vivo challenges. We present a few caveats for DLC coatings including delamination, hydrophobicity, and other conflicting as well as outdating findings in the literature. We recommend prudently exploring DLC films as potential coatings on metallic TJR components to solve the problems pertaining to wear, metal ion release, and corrosion. Ultimately, we advise bringing DLC into clinical use only after addressing all challenges and concerns outlined in this article.

High revision rate of metal-backed glenoid component and impact on the overall revision rate of stemless total shoulder arthroplasty: a cohort study from the Danish Shoulder Arthroplasty Registry.

BACKGROUND AND PURPOSE: There is controversy regarding the results of stemmed and stemless total shoulder arthroplasty (TSA) used for osteoarthritis. Therefore, we aimed to compare revision rates of stemmed and stemless TSA and to examine the impact of metal-backed glenoid components. METHODS: We included all patients reported to the Danish Shoulder Arthroplasty Register from January 1, 2012 to December 31, 2022 with an anatomical TSA used for osteoarthritis. Primary outcome was revision (removal or exchange of components) for any reason. RESULTS: 3,338 arthroplasties were included. The hazard ratio for revision of stemless TSA adjusted for age and sex was 1.83 (95% confidence interval [CI] 1.21-2.78) with stemmed TSA as reference. When excluding all arthroplasties with a metal-backed glenoid component, the adjusted hazard ratio for revision of stemless TSA was 1.37 (CI 0.85-2.20). For the Eclipse stemless TSA system, the adjusted hazard ratio for revision of a metal-backed glenoid component was 8.75 (CI 2.40-31.9) with stemless Eclipse with an all-polyethylene glenoid component as reference. CONCLUSION: We showed that the risk of revision of stemless TSAs was increased and that it was related to their combination with metal-backed glenoid components.

Effective shape of ball-and-socket prosthesis in restoring range of thumb motion for total thumb carpometacarpal joint arthroplasty: three-dimensional motion analysis.

PURPOSE: Total joint arthroplasty (TJA) has often been used to treat thumb carpometacarpal (CMC) osteoarthritis (OA). However, guidelines for the CMC prosthesis shape remain unclear. This study aimed to identify the effective shape of a ball-and-socket prosthesis in restoring the range of thumb motion after TJA. METHODS: The participants were 10 healthy young adult men (22-32 years; 26.8 ± 3.57 [mean ± SD]). CT scans were performed in eight static limb positions during abduction and flexion. We defined three design variables (offset R, height H, and neck rotation angle Φ) as the variables that determine the basic shape of the ball-and-socket prosthesis. The ideal values of these design variables were examined based on the results of a 3D motion analysis, which evaluated the change in the posture of the first metacarpal (r, h, and φ corresponding to R, H, and Φ, respectively) relative to the center of rotation (COR) during abduction and flexion. We also simulated the effect of these design variables on the range of thumb motion after TJA using 3D CAD. RESULTS: We found that the values of r and h averaged over all limb positions were 6.92 ± 1.60 mm and 51.02 ± 1.67 mm, respectively, showing that these values remained constant regardless of limb position. In contrast, φ changed significantly. The simulation results indicated that Φ affected the range of thumb motion after TJA, and Φ = 0° relatively reproduced all limb positions compared to other values. CONCLUSION: Our results suggested that the desirable values of R and H were the average of r and h over several limb positions and that Φ = 0° was effective in restoring the range of thumb motion after TJA. Our results will provide surgeons with new guidelines for selecting a prosthesis.

Patient-Experience of Trapeziectomy for Trapeziometacarpal Osteoarthritis in Wide-Awake Local Anesthesia no Tourniquet, 2-Year Follow-up.

PURPOSE OF THE STUDY: The purpose of this study was to assess the patient experience of trapeziectomy under WALANT for trapeziometacarpal joint (TMJ) osteoarthritis (OA) in a prospective study with 2-year follow-up. MATERIAL AND METHODS: The study included 23 patients with TMJ OA undergoing trapeziectomy with WALANT. All patients were seen by a hand therapist preoperatively and at 3, 12, and 24 months postoperatively. At each visit, VAS pain scores, thumb range of motion, grip strength, and Disabilities of the Arm, Shoulder and Hand (DASH) score were assessed. The Picker Patient Experience (PPE-15) questionnaire was administered within 2 weeks of surgery. RESULTS: All 23 patients completed the PPE-15 questionnaire. Their mean age was 64 years. The 21 patients who remained at the 24-month follow-up all said they would choose the same anaesthesia method again. At this follow-up, VAS pain scores, thumb range of motion, key pinch grip and DASH scores had improved significantly, while thumb opposition and hand grip strength remained largely unchanged. The majority of patients felt well informed before and during the procedure, and all patients rated pain relief as good or satisfactory. Nearly 40% of patients reported receiving inadequate information about the postoperative medications. DISCUSSION: Patients have a positive attitude to trapeziectomy with WALANT, and seem to prefer WALANT over other methods of anaesthesia. Trapeziectomy with WALANT for TMJ OA is a safe procedure and appears to give a functional outcome similar to trapeziectomy under general anaesthesia. CONCLUSIONS: Trapeziectomy with WALANT for TMJ OA is safe, preferred by patients and has similar clinical outcome as trapeziectomy in general anesthesia. KEY WORDS: trapeziectomy, osteoarthritis, WALANT.

Effect of the Sauvé-Kapandji method on the wrist contact surface for distal radial ulnar joint disorders.

BACKGROUND: The Sauvé-Kapandji (S-K) method is a surgical procedure performed for chronic deformities of the distal radial ulnar joint (DRUJ). Changes to the joint contact surface from pre- to postoperatively under physiological in vivo conditions have not yet been determined for this useful treatment. The aim of the present study was therefore to compare the articular contact area of the wrist joint between before and after the S-K method for DRUJ disorders. METHODS: The SK method was performed for 15 patients with DRUJ osteoarthritis and ulnar impaction syndrome. We calculated the Mayo Wrist Score as the patient's clinical findings and created 3-dimensional bone models of cases in which the S-K method was performed and calculated the contact area and shift in the center of the contact area using customized software. RESULTS: The Mean modified Mayo Wrist Score improved significantly from 60.3 preoperatively to 80.3 postoperatively (P < 0.01). Scaphoid contact area to the radius increased significantly from 112.6 ± 37.0 mm2 preoperatively to 127.5 ± 27.8 mm2 postoperatively (P = 0.03). Lunate contact area to radius-ulna was 121.3 ± 43.3 mm2 preoperatively and 112.5 ± 37.6 mm2 postoperatively, but this decrease was not significant (P = 0.38). Contact area ratio of scaphoid to lunate increased significantly from 1.01 ± 0.4 preoperatively to 1.20 ± 0.3 postoperatively (P = 0.02). Postoperative translations of the center of the scaphoid and lunate contact areas were decomposed into ulnar and proximal directions. Ulnar and proximal translation distances of the scaphoid contact area were 0.8 ± 1.7 mm and 0.4 ± 0.6 mm, respectively, and those of the lunate contact area were 1.1 ± 1.7 mm and 0.4 ± 1.1 mm, respectively. This study revealed changes in wrist contact area and center of the contact area before and after the S-K method. CONCLUSION: These results may accurately indicate changes in wrist joint contact area from pre- to postoperatively using the S-K method for patients with DRUJ disorder. Evaluation of changes in contact area due to bone surface modeling of the wrist joint using 3DCT images may be useful in considering surgical methods.

Outcomes of Arthroscopic Debridement of the First Carpometacarpal Joint: A Systematic Review.

Background: Arthroscopic debridement is increasingly being utilised in patients with early-stage first carpometacarpal joint (FCMCJ) arthritis but has limited supportive evidence. This systematic review evaluates the literature, and reports on outcomes and adverse events following this procedure. Methods: An electronic literature search of PubMed, Embase, Medline and Cochrane Central, looking for studies describing outcomes following arthroscopic debridement in FCMCJ arthritis, was performed in November 2022. Studies where bony resection or interposition was performed as adjuncts were excluded. Reported outcomes included visual analogue scores (VAS) for pain; Disabilities of Arm, Shoulder and Hand (DASH) scores; pinch and grip strength; complications and re-operations. Results: Out of a total of 90 studies revealed from the search, only two studies were eligible for inclusion, with a cohort of 34 patients. Following arthroscopic debridement for FCMCJ osteoarthritis, the mean VAS improved by four units, mean DASH by 22 points, grip strength by 4.5 kg and pinch strength by 2 kg at mean follow-up of 18 months. The pooled complication and re-operation rates were 8.8% and 23.5%, respectively. Conclusions: There is a lack of evidence supporting the utility of FCMCJ arthroscopy and debridement in the management of patients with early arthritis. Although the limited evidence suggests that there may be some therapeutic benefit, further large-scale prospective studies need to be performed before making conclusive recommendations. Level of Evidence: Level III (Therapeutic).

Joint preserving procedures for Takakura stage IIIB varus ankle osteoarthritis.

A man in his early 70s with right Takakura stage IIIB varus ankle osteoarthritis underwent medial opening wedge supramalleolar osteotomy with inframalleolar correction as joint preserving procedure. We also performed anteroinferior tibiofibular ligament (AITFL) resection with fibular shortening valgisation osteotomy to enhance the talar tilt correction. Postoperative decrease in talar tilt with dramatic symptom improvement was achieved. Performing the AITFL resection with fibular shortening valgisation osteotomy plus concomitant supramalleolar osteotomy and inframalleolar correction for Takakura stage IIIB varus ankle osteoarthritis resulted in successful improvement in talar tilt by making room for the valgus deviation of the talus.

Optimizing Subtalar Arthrodesis: A Human Cadaveric Evaluation of a Novel Partially-Threaded Screw Combination in the Delta Configuration.

Background and Objectives: Despite the established role of subtalar joint arthrodesis (SJA) for treatment of subtalar osteoarthritis, achieving bone union remains challenging, with up to 46% non-union rates. Adequate compression and stable fixation are crucial for successful outcomes, with internal screw fixation being the gold standard for SJA. The delta configuration, featuring highly divergent screws, offers stability, however, it can result in hardware irritation in 20-30% of patients. Solutions to solve this complication include cannulated compression screw (CCS) countersinking or cannulated compression headless screw (CCHS) application. The aim of this biomechanical study was to investigate the stability of a delta configuration for SJA utilizing either a combination of a posterior CCHS and an anterior CCS or a standard two-CCS combination. Materials and Methods: Twelve paired human cadaveric lower legs were assigned pairwise to two groups for SJA using either two CCSs (Group 1) or one posterior CCHS and one anterior CCS (Group 2). All specimens were tested under progressively increasing cyclic loading to failure, with monitoring of the talocalcaneal movements via motion tracking. Results: Initial stiffness did not differ significantly between the groups, p = 0.949. Talocalcaneal movements in terms of varus-valgus deformation and internal-external rotation were significantly bigger in Group 1 versus Group 2, p ≤ 0.026. Number of cycles until reaching 5° varus-valgus deformation was significantly higher in Group 2 versus Group 1, p = 0.029. Conclusions: A delta-configuration SJA utilizing a posterior CCHS and an anterior CCS is biomechanically superior versus a standard configuration with two CCSs. Clinically, the use of a posterior CCHS could prevent protrusion of the hardware in the heel, while an anterior CCS could facilitate less surgical time and thus less complication rates.

Posterior Interosseous Artery Adipofascial Flap for the Management of Distal Radioulnar Joint Osteoarthritis.

LEVEL OF EVIDENCE: Level IV-therapeutic.

Total joint arthroplasty for thumb carpometacarpal joint osteoarthritis: a systematic review and meta-analysis of randomized controlled trials.

BACKGROUND AND PURPOSE: Thumb carpometacarpal (CMC) joint osteoarthritis (OA) is increasingly treated with total joint arthroplasty (TJA). We aimed to perform a systematic review and meta-analysis of the benefits and harms of the TJA for thumb CMC OA compared with other treatment strategies. PATIENTS AND METHODS: We performed a systematic search on MEDLINE and CENTRAL databases on August 2, 2023. We included randomized controlled trials investigating the effect of TJA in people with thumb CMC joint OA regardless of the stage or etiology of the disease or comparator. The outcomes were pooled with a random effect meta-analysis. RESULTS: We identified 4 studies randomizing 420 participants to TJA or trapeziectomy. At 3 months, TJA's benefits for pain may exceed the clinically important difference. However, after 1-year follow-up TJA does not improve pain compared with trapeziectomy (mean difference 0.53 points on a 0 to 10 scale; 95% confidence interval [CI] 0.26-0.81). Furthermore, it provides a transient benefit in hand function at 3 months (measured with Disabilities of Arm, Shoulder, and Hand questionnaire, scale 0-100, lower is better) compared with trapeziectomy with or without ligament reconstruction tendon interposition. The benefit in function diminished to a clinically unimportant level at 1-year follow-up (4.4 points better; CI 0.42-8.4). CONCLUSION: Transient benefit in hand function for TJA implies that it could be a preferable option over trapeziectomy for people who consider fast postoperative recovery important. However, current evidence fails to inform us if TJA carries long-term higher risks of revisions compared with trapeziectomy.

International trends in shoulder replacement: a meta-analysis from 11 public joint registers.

BACKGROUND AND PURPOSE: International variation exists in the types of shoulder replacement used for treatment of specific diseases. Implant choice continues to evolve without high-quality evidence. Our aim was to evaluate trends in incidence rates of shoulder replacement and assess any recent changes in practice between countries by using registry data. METHODS: Patient characteristics, indication and year of surgery, type of replacement, and collection methods of patient-reported outcomes (PROMs) was extracted from 11 public joint registries. Meta-analyses examined use of reverse total shoulder replacement (RTSR) for osteoarthritis, cuff tear arthropathy, and acute fracture; use of anatomical total shoulder replacement (TSR) for osteoarthritis; and use of humeral hemiarthroplasty for fracture. RESULTS: The annual growth rate of shoulder replacements performed is 6-15% (2011-2019). The use of RTSR has almost doubled (93%). RTSR is now universally performed for cuff tear arthropathy (97.3%, 95% confidence interval [CI] 96.0-98.1). Its use for avascular necrosis, trauma, and inflammatory arthropathy is increasing. The use of RTSR was similar (43.1%, CI 30.0-57.2) versus TSR (44.7%, CI 31.1-59.1) for osteoarthritis. The types of PROMs used, collection time points, and response rates lack standardization. COVID-19 had a varying inter-registry impact on incidence rates. CONCLUSION: The incidence of shoulder replacements has grown. Use of RTSR has increased for all disease indications despite limited high-quality evidence driving this change in indications outside of cuff arthropathy. Consequently, less variation is observed in international practice. Existing differences now relate to use of newer implant types and methodology of PROMs collection, which prevents international comparison and outcome analysis.

Anterior Plate-Supported Cannulated Screw Surgery for Ankle Arthrodesis: Clinical and Radiologic Results in Patients with Trauma-Related End-Stage Ankle Osteoarthritis.

BACKGROUND This retrospective study included 31 patients from 2 centers in Türkiye with posttraumatic ankle osteoarthritis treated with anterior tibiotalar arthrodesis using an anterior plate and cannulated screw fixation, with 6 months of follow-up. MATERIAL AND METHODS In this bi-center study, conducted between January 2018 and July 2022, we retrospectively reviewed the digital records of 31 patients with end-stage posttraumatic ankle osteoarthritis who were treated with anterior tibiotalar arthrodesis surgery using 2 or 3 cannulated screws and the anterior plating technique. Data on age, gender, comorbidities, and smoking were recorded, as were operative technique and graft use. Union characteristics, complications, visual analog scale (VAS) results, and Maryland functional scoring were assessed preoperatively and at the 6-month follow-up visit. RESULTS The mean age of the 31 (n=13 male, n=18 female) patients was 55.5 (19-82) years. The union findings were good in 26 (83.9%) of the patients and late in 3 (9.7%) of them. Nonunion was seen in 2 (6.5%) patients. Complications were observed in 7 (22.6%) patients. Union formation was statistically significantly prolonged among the cases with complications (P=0.002). The smoking rate was significantly higher in patients encountering complications (P=0.001). Among cases with complications, the VAS and Maryland scores recorded in the postoperative sixth month were significantly higher (P=0.027, P=0.018, respectively). The mean union time was 13.5±6.5 weeks among all of the patients. CONCLUSIONS Our study showed that cannulated screw fixation, strengthened with the common and easy-to-supply anterior reconstruction plating technique, had high fixation power and good functional results in patients with end-stage posttraumatic ankle osteoarthritis.

Do patients with osteoarthritis lose weight prior to elective joint replacement?

BACKGROUND: Obesity is a known risk factor for the development of osteoarthritis and the subsequent need for joint replacement. Weight loss has been shown to reduce pain, disability, and the need for joint replacement, particularly in patients with knee osteoarthritis. The aim of this study was to investigate pre-operative weight change in patients with hip, knee, and shoulder osteoarthritis at a regional, public hospital in Australia, to identify opportunities for pre-operative weight-loss intervention. METHODS: A retrospective review of patients who underwent elective primary total hip (THR), knee (TKR), and shoulder (TSR) replacement for osteoarthritis was conducted between December 2019 and December 2022. BMI data were collected at three time points: (1) general practitioner (GP) referral; (2) orthopaedic clinic review; and (3) pre-admission clinic (PAC) assessment. RESULTS: A total of 496 patients were included in the study, of which 205 underwent THR, 251 underwent TKR, and 40 underwent TSR. The mean patient age was 67 years, and 46.4% were female. At the time of GP referral, the mean body mass index (BMI) was 31.4 kg/m2. Across the study period, only 2% of patients experienced clinically significant weight loss pre-operatively (≥5% of total body weight). CONCLUSION: This study has demonstrated that very few patients lose weight prior to undergoing joint replacement in the public sector in Australia. This highlights the need for targeted non-surgical weight loss interventions for patients currently awaiting joint replacement.

[Base-of-thumb osteoarthritis: aspects to be considered with the indication of trapeziectomy and CMC I prosthesis]. / Die Daumensattelgelenksarthrose ­ Aspekte zur Indikationsstellung von Resektionsarthroplastik und Daumensattelgelenksprothese.

Base-of-thumb osteoarthritis is the most frequent osteoarthritis of the hand requiring surgical treatment, although conservative treatment options should be exhausted before surgery. If the wear process progresses with continuing pain-related loss of thumb function, thus leading to a loss of function of the whole hand, surgical treatment is indicated. In 1947, Gervis published results after trapeziectomy and heralded the development of a multitude of different surgical procedures. The long time needed for rehabilitation is a major problem of trapeziectomy with or without tendon interposition and/or suspension. After the implementation of the first CMC I prosthesis by De la Caffiniere 50 years ago, a rapid development took place, leading to the current modular bipolar implants. Especially in the German-speaking world, there is still some scepticism regarding these prostheses, which is why this review aims to illuminate both surgical procedures with a special focus placed on the aspects of indication.

[Cup Placement in Thumb Carpometacarpal Joint Prostheses: The Role of the Guidewire]. / Pfannenplatzierung bei Daumensattelgelenksprothesen: Die Rolle des Führungsdrahts.

BACKGROUND: The increasing use of thumb carpometacarpal joint prostheses for advanced CMC 1 (carpometacarpal) joint arthritis reflects the success of the latest prosthesis generations, which has been achieved through their improved functional outcomes and lower complication rates. Precise alignment of the prosthesis cup parallel to the proximal joint surface of the trapezium is essential for stability and the prevention of dislocation. This is a challenging surgical step, particularly for surgeons new to this technique. Despite adequate positioning of the guidewire, misplacements of the cup may occur, necessitating intraoperative revision. MATERIAL AND METHODS: This study examined the deviations in cup and guidewire positioning in thumb carpometacarpal joint prosthesis implantations by inexperienced and experienced surgeons through radiological analysis of 65 prostheses. RESULTS: Both inexperienced and experienced surgeons achieved precise guidewire positioning with mean deviations of<2.2°. Inexperienced surgeons showed significantly larger cup deviations in the dorsopalmar and lateral view (7.6±6.1° and 7.3±5.9°) compared with experienced surgeons (3.6±2.7° and 3.6±2.5°; p=0.012, p=0.017). The deviation of the cup position exhibited by inexperienced surgeons tends to be in the direction opposite to the initial guidewire position (p<0.0038). CONCLUSION: The results highlight the current challenges in cup positioning depending on a surgeon's level of experience, questioning the reliability of the current guidewire placement.

Tibiotalocalcaneal ankle arthrodesis with posterior approach arthroscopic-assisted hindfoot nailing.

PURPOSE: End-stage ankle arthrosis causes severe pain and limited movement. Tibiotalocalcaneal arthrodesis with arthroscopy-assisted hindfoot nailing can be used to achieve a high union rate and low complication rate. We aimed to examine the early- and mid-term results of patients treated with this technique from various perspectives and to evaluate them by comparing them with the current literature. METHODS: Data were collected from 25 patients who met the established criteria and underwent TTCA with arthroscopic-assisted hindfoot nailing. In addition to the demographic data of the patients, their clinical and pain scores were evaluated using the American Orthopedic Foot and Ankle Society (AOFAS) and visual analogue scale (VAS). Additionally, the union time and complication data during the follow-up period were examined. RESULTS: When the AOFAS and VAS scores of the 25 patients were examined, a significant improvement was observed in the preoperative period and early postoperative period comparisons (p < .001). No significant change was observed between the comparison of the postoperative 12th month and last postoperative control clinical scores. While the union rate of the patients was observed to be 92%, the average union time was 13.1 ± 3.5 weeks. During follow-up, peri-implant fracture, deep infection, and non-union were observed in one patient each (12%). CONCLUSION: The early- and mid-term postoperative results of patients treated with TTCA surgery with posterior approach arthroscopic-assisted hindfoot nailing show that this technique may be an option with low complication and high union rates for the appropriate group of patients planned for ankle arthrodesis.

Establishment of a Posttraumatic Osteoarthritis Model in Mice Induced by Noninvasive Anterior Cruciate Ligament Tear.

BACKGROUND: Animal models that use open surgical transection of the anterior cruciate ligament (ACL) do not accurately simulate the clinical condition regarding the pivot-shift mechanism and the associated inflammatory response that occurs before reconstruction. PURPOSE/HYPOTHESIS: The purpose was to characterize a reproducible manual, nonsurgical method to mimic an isolated ACL tear in a clinically relevant model and to evaluate the development of progressive posttraumatic osteoarthritis due to ACL injury. It was hypothesized that the ACL could be reproducibly torn with minimal damage to other ligaments and that there would be progressive development of degenerative joint disease after ACL injury. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 37 mice (strain C57BL/6) were used to compare the manual procedure with sham surgery (sham group; n = 10) and with the established surgical ACL transection (ACLT) procedure (surgical group; n = 27). In the sham group, a closed manual procedure was performed on the right knee and sham surgery on the left knee. In the surgical group, the closed manual procedure was performed on the right knee and surgical ACLT on the left knee. Dissection using India ink, histological assessment with safranin O and hematoxylin-eosin staining, radiological evaluation through radiographs and microfocus computed tomography scans, and gait analyses were performed to assess cartilage/ligament status. Osteoarthritis Research Society International (OARSI) and synovitis scores, anterior tibial translation, range of motion, bone microstructure, osteophyte volume, and pain were assessed at 2, 4, and 8 weeks postoperatively. RESULTS: The manual procedure successfully resulted in an ACL rupture and associated meniscal injury. The posterior cruciate, lateral collateral, and medial collateral ligaments were intact in all dissected knees. Two weeks after ACL tear, the surgical group showed a significantly higher synovitis score, whereas 8 weeks after ACL tear, the manual group showed a significantly higher volume of osteophytes. No significant differences were found between the groups in terms of OARSI score, anterior tibial translation, range of motion, bone microstructure computed tomography values, and stride distance/irregularity. CONCLUSION: This procedure can be used to create an ACL tear model without causing grossly evident injuries to other ligaments and avoiding the risk of cartilage damage from surgical instruments. CLINICAL RELEVANCE: This procedure offers a more clinically relevant ACL tear model and facilitates simple, inexpensive, and reproducible development of posttraumatic osteoarthritis.

[Influence and risk factors of lateral hinge fracture on early effectiveness of supramalleolar osteotomy].

Objective: To evaluate the influence of lateral hinge fracture (LHF) on the early effectiveness of supramalleolar osteotomy (SMO) and to explore the related risk factors for LHF. Methods: A total of 39 patients (39 feet) with varus-type ankle osteoarthritis treated with SMO between January 2016 and December 2022 were analyzed retrospectively. There were 10 males and 29 females, aged from 41 to 71 years (mean, 57.7 years). According to Takakura stage, there were 6 feet in stage Ⅱ, 19 feet in stage Ⅲa, and 14 feet in stage Ⅲb. The LHF was recognized by the immediate postoperative X-ray film. The osteotomy healing time and the changes of pain visual analogue scale (VAS) score, American Orthopaedic Foot and Ankle Society (AOFAS) score, tibial anterior surface angle (TAS), tibial lateral surface angle (TLS), and tibiotalar angle (TT) before and after operation were compared between patients with and without LHF. The age, gender, affected side, body mass index, Takakura stage, preoperative VAS score, preoperative AOFAS score, preoperative TAS, preoperative TLS, preoperative TT, SMO correction angle, osteotomy distraction, distance from medial osteotomy to ankle joint line (MD), and distance from lateral osteotomy to ankle joint line (LD) were compared between with and without LHF patients, and further logistic regression analysis was used to screen the risk factors of LHF during SMO. Results: All patients were followed up 12-54 months (mean, 27.1 months). During operation, 13 feet developed LHF (group A) and 26 feet did not develop LHF (group B). X-ray film reexamination showed that 1 patient in group A complicated with tibial articular surface cleft fracture had delayed osteotomy and healed successfully after plaster fixation; the osteotomy of other patients healed, and there was no significant difference in healing time between the two groups ( P>0.05). At last follow-up, there were significant differences in VAS score, AOFAS score, TAS, TLS, and TT of the two groups when compared with preoperative ones ( P<0.05), but there was no significant difference in the changes of above indicators before and after operation between the two groups ( P>0.05). The differences in SMO correction angle, osteotomy distraction, and LD between with and without LHF patients were significant ( P<0.05), and further logistic regression analysis showed that excessive LD was the risk factor of LHF during SMO ( P<0.05). Conclusion: Too high or too low lateral hinge position during SMO may lead to LHF, but as long as appropriate treatment and rehabilitation measurements are taken, the early effectiveness is similar to that of patients without LHF.