Manejo cirúrgico de ferimento auto-infligido por arma de fogo em região maxilofacial / Surgical management of self-inflicted injury by gun in the maxillofacial region

INTRODUÇÃO: O manejo dos pacientes vítimas de PAF possui vertentes divergentes a respeito do tratamento cirúrgico, que pode ser realizado de forma imedata ou tardia. Em lesões auto-infligidas, a distância entre a arma e a região acometida é menor, causando consequências estéticas e funcionais mais devastadoras. Aliado ao fato desse tipo de trauma criar uma ferida suja devido à comunicação com a cavidade oral e seios paranasais, o manejo das lesões representam um desafio mesmo à cirurgiões experientes. OBJETIVO: Estre trabalho relata o manejo cirúrgico de uma ferida auto-infligida por arma de fogo que resultou em avulsão dos tecidos moles na região maxilofacial. DESCRIÇÃO DO CASO: Paciente do sexo masculino, 35 anos, vítima de projétil de arma de fogo auto-infligido em região maxilofacial, cursando com extenso ferimento em região de língua e mento. Clinicamente, o paciente não apresentava sinais de fratura em ossos da face. Ambos os ferimentos apresentavam secreção purulenta e o paciente manifestava disfonia devido a grande destruição tecidual. CONSIDERAÇÕES FINAIS: O tratamento de ferimentos por arma de fogo não só é um grande desafio para o cirurgião, como para toda a equipe multidisciplinar requerida para tais casos, visto que não há protocolos bem definidos para o tratamento dessas lesões(AU)

INTRODUCTION: The management of patients who are victims of FAP has divergent aspects regarding surgical treatment, which can be performed immediately or late. In self-inflicted injuries, the distance between the weapon and the affected region is smaller, causing more devastating aesthetic and functional consequences. Allied to the fact that this type of trauma creates a dirty wound due to the communication with the oral cavity and paranasal sinuses, the management of injuries represents a challenge even for experienced surgeons. OBJECTIVE: This paper reports the surgical management of a self-inflicted gunshot wound that resulted in soft tissue avulsion in the maxillofacial region. CASE DESCRIPTION: Male patient, 35 years old, victim of a self-inflicted firearm projectile in the maxillofacial region, coursing with extensive injury in the region of the tongue and chin. Clinically, the patient did not show signs of facial bone fractures. Both wounds had purulent secretion and the patient had dysphonia due to extensive tissue destruction. FINAL CONSIDERATIONS: The treatment of gunshot wounds is not only a great challenge for the surgeon, but also for the entire multidisciplinary team required for such cases, since there are no well-defined protocols for the treatment of these injuries(AU)

Oral Mucosa and Saliva Alterations Related to Vape.

OBJECTIVES: Electronic nicotine delivery systems (e-cigarette, pod, and vape) are currently among the tobacco consumption of adolescents and young adults. The aim is to show oral mucosa and saliva alterations related to vape. MATERIAL AND METHODS: A vape-user patient, presenting a white plaque in the posterior region of the hard palate, underwent clinical examination, sialometry, pH evaluation, and excisional biopsy of the white lesion. Molecular changes in saliva and vape liquid were analyzed by vibrational spectroscopy. RESULTS: The histopathological analyses showed hyperparakeratosis without dysplasia. Formaldehyde, ketones, and aromatic hydrocarbon species were identified in e-cig liquid by the FTIR. CONCLUSIONS: The use of vape may be related to the development of hyperkeratotic lesions in the oral mucosa as well as significantly modify the patient's salivary patterns as the vape liquid presents carcinogenic and cytotoxic components in its composition.

Use of a haired angularis oris axial pattern flap in a dog to correct a large oronasal fistula secondary to resection of a hard palate multilobular osteochondrosarcoma.

A 6-year-old neutered male mixed-breed dog underwent curative-intent surgical resection of a hard palatal multilobular osteochondrosarcoma and closure of the defect using bilateral buccal mucosal flaps. However, failure of the flaps resulted in a massive hard palatal defect that was subsequently repaired using a haired skin angularis oris axial pattern flap. This report describes the clinical outcome using this surgical approach and novel complications encountered. Key clinical message: The haired skin angularis oris axial pattern flap appears to be a suitable and robust option for reconstruction of large palatal defects.

Utilisation d'un lambeau cutanée poilus avec rotation axiale au niveau de l'artère angularis oris chez un chien pour corriger une fistule oronasale volumineuse secondaire à la résection d'un ostéochondrosarcome multilobulaire du palais dur. Un chien croisé mâle castré de 6 ans a subi une résection chirurgicale à visée curative d'un ostéochondrosarcome multilobulaire du palais dur et une fermeture de l'anomalie par des lambeaux de la muqueuse buccale. Cependant, la défaillance des lambeaux a entraîné un défaut important du palais dur qui a ensuite été réparé à l'aide d'un lambeau de peau avec poils avec rotation axiale au niveau de l'artère angularis oris. Ce rapport décrit les résultats cliniques de cette approche chirurgicale et les nouvelles complications rencontrées.Message clinique clé :L'utilisation d'un lambeau de peau avec poils avec rotation axiale au niveau de l'artère angularis oris semble être une option appropriée et robuste pour la reconstruction des défauts importants du palais.(Traduit par Dr Serge Messier).

Maxillomandibular Fusion Along with Fusion of Dorsal Surface of the Tongue to the Hard Palate-A Case Report.

RATIONALE: This case report presents a rare combination of congenital anomalies in an otherwise healthy male infant born at 36 weeks. The infant was diagnosed with congenital maxillomandibular synechia, ectrodactyly, and ankyloglossia superior syndrome (ASS). PATIENT CONCERNS: Inability to open the mouth completely, feeding challenges, and a cleft palate. The infant was stabilized through successful positive pressure ventilation via a face mask at birth and enteral feeding was initiated via a feeding gastrostomy. EXAMINATION: Diagnostic tests revealed a midline palatal cleft, hypoplastic jaws, persistent metopic suture, and a bony fusion at the midline. TREATMENT: Sectioning of the bony spur along the midline and achieving a mouth opening of 2 cm post-manipulation. The patient is under follow-up, with future treatment plans including cleft palate correction at 12 months and potential frontomandibular and lower jaw advancement depending on growth trajectories. TAKEAWAY LESSONS: This case underscores the complexity of managing multiple congenital anomalies and the need for individualized treatment plans.

How palatal vault morphology and screw length influence the accuracy of dynamic computer-guided orthodontic miniscrew insertion. A prospective clinical study.

OBJECTIVES: The aim of this study was to evaluate the influence of palatal vault morphology and screw length on the accuracy of miniscrew insertion in dynamic computer-assisted surgery (d-CAS). METHODS: Twenty-four subjects were allocated into three groups, according to their palatal vault morphology (Group A: medium; Group B: steep/high; Group C: low/flat) and the length of miniscrew used. For each subject, two miniscrews were inserted using a dynamic navigation system. To assess the accuracy of insertion, a postoperative CBCT was performed, and the pre- and post-operative scans were superimposed. Five variables were evaluated: Entry-3D, Entry-2D, Apex-3D, Apex-vertical and angular deviation. Descriptive statistics, Shapiro-wilk, Kruskal-Wallis and Dunn's tests were used for the statistical analysis. The level of significance was P ≤ 0.05. RESULTS: The mean angular deviation values revealed strong discrepancies amongst the groups (Group A:7.11°±5.70°; Group B:13.30°±7.76°; Group C:4.92°±3.15°) and significant differences were found regarding the Apex-3D (P = 0.036) and angular deviations (P = 0.008). A Dunn's test revealed differences in angular deviation between the medium and high/steep palate group (P = 0.004), and between low/flat and high/steep palate group (P = 0.01) but did not confirm any significant difference in the Apex-3D parameter (Group A-B P = 0.10; Group B-C, P = 0.053; Group A-C, P = 1.00). No significant differences were found regarding the length of the miniscrews. CONCLUSIONS: Palatal vault morphology is a factor that influences the accuracy of miniscrew insertion in d-CAS. In subjects with steep and high palatal vaults, insertion accuracy is lower when considering the angular deviation value. Miniscrew length does not influence accuracy. CLINICAL SIGNIFICANCE: Although computer-guided surgery assists the clinician in preventing damage to nearby anatomical structures, individual anatomical variability is a crucial variable. In subjects with a high/steep palate, greater attention should be paid during the planning phase in order to allow for a wide margin from adjacent anatomical structures to achieve better outcomes.

Morphological evaluation of the nasopalatine canal using cone beam computed tomography and its clinical implications for orthodontic miniscrew insertion.

BACKGROUND: The morphology of the nasopalatine canal is crucial in the planning of prosthetic restorations in the anterior region of the maxilla, as well as in the placement of orthodontic mini-implants. OBJECTIVES: The aim of this study was to assess the morphology of the nasopalatine canal using cone beam computed tomography (CBCT) scans of patients from the University Dental Clinic in Krakow, Poland, to define the position of the canal in relation to common sites of palatal median microimplant placement, and to investigate potential correlations between the anatomy of the canal and age and gender of the patients. MATERIAL AND METHODS: A total of 120 CBCT images were used to assess the anatomy of the nasopalatine canal in 3 planes of space. The bone thickness anterior to the nasopalatine canal and the distance between the distal margin of Stenson's foramen and the predicted midpalatal microimplant position were also measured. RESULTS: The most frequently observed canal type in the coronal plane was the Y-shaped canal, which was present in 60.8% of patients. The nasopalatine canal was classified as cone-shaped in 31.7% of the scans, cylindrical in 28.3%, hourglass-shaped in 27.5%, and banana-shaped in 12.5%. The mean length of the nasopalatine canal was 11.58 mm. The mean width of the canal was 2.89 mm at the nasal fossa level, 1.94 mm in the middle, and 5.09 mm at the palatal level. The mean bone thickness anterior to the nasopalatine canal was 9.07 mm at the level of the nasal opening, 6.84 mm at the level of the oral opening, and 7.32 mm in the middle. The mean distance between the distal margin of Stenson's foramen and the predicted midpalatal microimplant position varied from 0 to 11.94 mm, with a mean of 2.49 mm. CONCLUSIONS: Given the variety of nasopalatine canal forms and dimensions, detailed analysis of CBCT scans is essential prior to the placement of implants and microimplants.

Three-dimensional printed personalised digital guide plate for greater palatine block in trigeminal neuralgia.

The nerve block is a safe and effective method to theat trigeminal neuralgia (TN). In terms of the V2 trigeminal neuralgia, the most difficult procedure in nerve block is accurate and fast greater palatine foramen (GPF) insertion. In this study, we developed a new technique using a personalised digital tooth-supported guide plate to increase insertion accuracy and success rates and reduce the pain of patients during injection. A total of 18 patients with TN (11 female and 7 male) were enrolled and treated between September 2020 and June 2022. Before injection, the guide plate was designed via Mimics three-dimensional (3D) reconstruction technology and printed via 3D printer. Then, all patients underwent maxillary nerve block with a guide plate for each injection. In this study, placement of all guide plates was completed within one minute and all punctures were successful the first time. The depth of the injection needle was over 2.5 cm in all cases and the guide plate was stability-supported by the maxillary teeth. The various pain scores had an obvious improvement. No patients presented symptoms of local anaesthetic toxicity or onset of new neurological sequelae. Using this new technology, we can significantly reduce the difficulty of GPF insertion and decrease patient pain during injection. The enhanced success rate of nerve block can achieve better therapeutic effect. For surgeons, personalised digital tooth-supported guide plates make the operation easier, especially for novice surgeons.

Nasopalatine canal cyst, a diagnostic twist.

We present a case of nasopalatine duct cyst in a 35-yearold female. The cyst was diagnosed based on the presence of only one clinical symptom and no obvious clinical signs, which is a relatively rare occurrence. However, the radiographic and histological presentation of this lesion was typical of a nasopalatine duct cyst. Therefore, this case report aims to highlight the variable presentations of the nasopalatine cyst, which is often misdiagnosed and treated as an endodontic infection.

Dehiscence and Fistula Formation Following Anterior Palatal Reconstruction With Vomer Flap.

BACKGROUND AND PURPOSE: Anterior palatal reconstruction using vomer flaps has been described during primary cleft lip repair. In this procedure, the mucoperiosteal tissue of the vomer is elevated to reconstruct the nasal mucosa overlying the cleft of the hard palate. Here the authors, evaluate the efficacy of a technique in which a superiorly based vomer flap is sutured to the lateral nasal mucosa. The authors assess vomer flap dehiscence rates and compare the likelihood of fistula development in this cohort to patients who underwent palatoplasty without vomer flap reconstruction. METHODS: A retrospective chart review was conducted of all palatoplasties performed by the senior author at an academic institution during a 7-year period. Medical records were reviewed for demographic variables, operative characteristics, and postoperative complications up to 1 year following surgery. Logistic regression analysis was conducted to assess the effects of vomer flap reconstruction on fistula formation, adjusting for age and sex. RESULTS: Fifty-eight (N=58) patients met the inclusion criteria. Of these, 38 patients (control group) underwent cleft palate reconstruction without previous vomer flap placement. The remaining 20 patients underwent cleft lip repair with vomer flap reconstruction before palatoplasty (vomer flap group). When bilateral cases were counted independently, 25 total vomer flap reconstructions were performed. Seventeen of these 25 vomer flap reconstructions (68%) were completely dehisced by the time of cleft palate repair. In the vomer flap group, 3 of the 20 patients (15%) developed fistulas in the anterior hard palate following the subsequent palatoplasty procedure. In the control group, only 1 of the 38 patients (2.6%) developed a fistula in the anterior hard palate. There was no significant association between cohorts and the development of anterior hard palate fistulas [odds ratio=10.88, 95% confidence interval (0.99-297.77) P =0.07], although analysis was limited by low statistical power due to the small sample size. CONCLUSIONS: In our patient population, anterior palatal reconstruction using a superiorly based vomer flap technique was associated with complete dehiscence in 68% of cases. Fistula formation in the anterior hard palate was also proportionately higher following initial vomer flap reconstruction (15% versus 2.6%). These results prompted the senior author to adjust his surgical technique to 1 in which the vomer flap overlaps the oral mucosa. While follow-up from these adjusted vomer flap reconstruction cases remains ongoing, early evidence suggests a reduced requirement for surgical revision following implementation of the modified technique.

Superimposition of virtual models using palatal rugae and maximum habitual intercuspation.

INTRODUCTION: The superimposition of 3 dimensions (3D) digital models has been increasingly used for evaluating dental changes resulting from orthodontic treatment, and different superimposition techniques have been described. Although the maxilla has areas with greater stability for superimposition, such as the palatal rugae, there is still no reliable method for superimposing models of the lower arch. OBJECTIVE: Therefore, this article aims to describe a technique for superimposing virtual models. METHODS: To evaluate pre- and post-orthodontic treatment changes, the Geomagic Qualify 2013 software (3D Systems®, Rock Hill, South Carolina, USA) was used, with reference points in the maxilla, including the rugae and a reference area in the palate and midpalatal raphe. The lower arch was superimposed using the maximum habitual intercuspation (MHI) model as reference. RESULTS AND CONCLUSION: 3D models superimposition using palatal rugae and MHI occlusion seems to offer satisfactory results in the interpretation of clinical changes at different follow-up moments in terms of development and/or orthodontic treatment.

Ultrasonic mapping of midpalatal suture - An ex-vivo study.

OBJECTIVE: Rapid maxillary expansion is a common orthodontic procedure to correct maxillary constriction. Assessing the midpalatal suture (MPS) expansion plays a crucial role in treatment planning to determine its effectiveness. The objectives of this preliminary investigation are to demonstrate a proof of concept that the palatal bone underlying the rugae can be clearly imaged by ultrasound (US) and the reconstructed axial view of the US image accurately maps the MPS patency. METHODS: An ex-vivo US scanning was conducted on the upper jawbones of two piglet's carcasses before and after the creation of bone defects, which simulated the suture opening. The planar images were processed to enhance bone intensity distribution before being orderly stacked to fuse into a volume. Graph-cut segmentation was applied to delineate the palatal bone to generate a bone volume. The accuracy of the reconstructed bone volume and the suture opening was validated by the micro-computed tomography (µCT) data used as the ground truth and compared with cone beam computed tomography (CBCT) data as the clinical standard. Also included in the comparison is the rugae thickness. Correlation and Bland-Altman plots were used to test the agreement between the two methods: US versus µCT/CBCT. RESULTS: The reconstruction of the US palatal bone volumes was accurate based on surface topography comparison with a mean error of 0.19 mm for pre-defect and 0.15 mm and 0.09 mm for post-defect models of the two samples, respectively when compared with µCT volumes. A strong correlation (R2 ≥ 0.99) in measuring MPS expansion was found between US and µCT/CBCT with MADs of less than 0.05 mm, 0.11 mm and 0.23 mm for US, µCT and CBCT, respectively. CONCLUSIONS: It was possible to axially image the MPS opening and rugae thickness accurately using high-frequency ultrasound. CLINICAL SIGNIFICANCE: This study introduces an ionizing radiation-free, low-cost, and portable technique to accurately image a difficult part of oral cavity anatomy. The advantages of conceivable visualization could promise a successful clinical examination of MPS to support the predictable treatment outcome of maxillary transverse deficiency.

Is the collateral circulation pattern in the hard palate affected by cleft deformity?

OBJECTIVES: To evaluate the influence of collateral vascularization on surgical cleft palate closure and deformities. MATERIALS AND METHODS: Corrosion casting was performed using red-colored acrylic resin in twelve fresh adult cadavers with a normal hard palate. Additionally, white-colored barium sulfate was injected into a fetus with a unilateral complete cleft palate, and layer-by-layer tissue dissection was performed. Both substances were injected into the external carotid arteries. Corrosion casting involved dissolving the soft and hard tissues of the orofacial area utilizing an enzymatic solution. RESULTS: In normal palates, bilateral intraosseous infraorbital arteries formed a network in the premaxilla with the intraosseous nasopalatine- and greater palatine arteries (GPAs). The perforating GPAs anastomosed with the sphenopalatine artery sub-branches. Bilateral extraosseous GPA anastomoses penetrated the median palatine suture. Complex vascularization in the retrotuberal area was detected. In the cleft zone, anastomoses were omitted, whereas in the non-cleft zone, enlarged GPAs were distributed along the cleft edges and followed the anatomical course anteriorly to initiate the network with facial artery sub-branches. CONCLUSIONS: The anatomical subunits of the palate exhibited distinct anastomosis patterns. Despite omitted anastomoses with collateral circulation in the cleft zone, arteries maintained their anatomical pattern as seen in the normal specimen in the non-cleft zone. CLINICAL RELEVANCE: Based on the findings in normal- and cleft palates, surgeons may expect developed anastomosis patterns in the non-cleft zone. Due to the lack of microcirculation in the cleft zone, the existent anastomoses should be maintained as much as possible by the surgical technique. This applies anteriorly in the incisive canal territory, alveolar ridges, and posteriorly in the retrotuberal area.

Three-dimensional finite element analysis on stress distribution after different palatoplasty and levator veli palatini muscle reconstruction.

OBJECTIVES: To establish a three-dimensional finite element model of the upper palate, pharyngeal cavity, and levator veli palatini muscle in patients with unilateral complete cleft palate, simulate two surgical procedures that the two-flap method and Furlow reverse double Z method, observe the stress distribution of the upper palate soft tissue and changes in pharyngeal cavity area after different surgical methods, and verify the accuracy of the model by reconstructing and measuring the levator veli palatini muscle. MATERIALS AND METHODS: Mimics, Geomagic, Ansys, and Hypermesh were applied to establish three-dimensional finite element models of the pharyngeal cavity, upper palate, and levator veli palatini muscle in patients with unilateral complete cleft palate. The parameters including length, angle, and cross-sectional area of the levator veli palatini muscle etc. were measured in Mimics, and two surgical procedures that two-flap method and Furlow reverse double Z method were simulated in Ansys, and the area of pharyngeal cavity was measured by hypermesh. RESULTS: A three-dimensional finite element model of the upper palate, pharyngeal cavity, and bilateral levator veli palatini muscle was established in patients with unilateral complete cleft palate ; The concept of horizontal projection characteristics of the palatal dome was applied to the finite element simulation of cleft palate surgery, vividly simulating the displacement and elastic stretching of the two flap method and Furlow reverse double Z method during the surgical process; The areas with the highest stress in the two-flap method and Furlow reverse double Z method both occur in the hard soft palate junction area; In resting state, as measured, the two flap method can narrow the pharyngeal cavity area by 50.9%, while the Furlow reverse double Z method can narrow the pharyngeal cavity area by 65.4%; The measurement results of the levator veli palatini muscle showed no significant difference compared to previous studies, confirming the accuracy of the model. CONCLUSIONS: The finite element method was used to establish a model to simulate the surgical procedure, which is effective and reliable. The area with the highest postoperative stress for both methods is the hard soft palate junction area, and the stress of the Furlow reverse double Z method is lower than that of the two-flap method. The anatomical conditions of pharyngeal cavity of Furlow reverse double Z method are better than that of two-flap method in the resting state. CLINICAL RELEVANCE: This article uses three-dimensional finite element method to simulate the commonly used two-flap method and Furlow reverse double Z method in clinical cleft palate surgery, and analyzes the stress distribution characteristics and changes in pharyngeal cavity area of the two surgical methods, in order to provide a theoretical basis for the surgeon to choose the surgical method and reduce the occurrence of complications.

Two-stage palatal repair in non-syndromic CLP patients using anterior to posterior closure is associated with minimal need for secondary palatal surgery.

OBJECTIVE: The aim of the present study was to assess the need for secondary palatal corrective surgery in a concept of palate repair that uses a protocol of anterior to posterior closure of primary palate, hard palate and soft palate. METHODS: A data base of patients primarily operated between 2001 and 2021 at the Craniofacial and Cleft Care Center of the University Goettingen was evaluated. Cleft lips had been repaired using Tennison Randall and Veau-Cronin procedures in conjunction with alveolar cleft repair. Cleft palate repair in CLP patients was accomplished in two steps with repair of primary palate and hard palate first using vomer flaps at the age of 10-12 months and subsequent soft palate closure using Veau/two-flap procedures 3 months later. Isolated cleft palate repair was performed in a one-stage operation using Veau/two-flap procedures. Data on age, sex, type of cleft, date and type of surgery, occurrence and location of oronasal fistulae, date and type of secondary surgery performed for correction of oronasal fistula (ONF)and / or Velophyaryngeal Insufficiency (VPI) were extracted. The rate of skeletal corrective surgery was registered as a proxy for surgery induced facial growth disturbance. RESULTS: In the 195 patients with non-syndromic complete CLP evaluated, a total number of 446 operations had been performed for repair of alveolar cleft and cleft palate repair (Veau I through IV). In 1 patient (0,5%), an ONF occurred requiring secondary repair. Moreover, secondary surgery for correction of VPI was required in 1 patient (0,5%) resulting in an overall rate of 1% of secondary palatal surgery. Skeletal corrective surgery was indicated in 6 patients (19,3%) with complete CLP in the age group of 15 - 22 years (n = 31). CONCLUSIONS: The presented data have shown that two-step sequential cleft palate closure of primary palate and hard palate first followed by soft palate closure has been associated with minimal rate of secondary corrective surgery for ONF and VPI at a relatively low need for surgical skeletal correction.

Reliability and safety of miniscrew insertion planning with the use of lateral cephalograms assessed on corresponding cone-beam computer tomography images.

BACKGROUND/OBJECTIVES: Recently, lateral cephalograms have been proposed for guided miniscrew insertion planning. Therefore, the aim was to assess the reliability and safety of such planning on corresponding cone-beam computer tomography (CBCT) images. MATERIALS/METHODS: Intraoral scans, lateral cephalograms, and CBCT images of 52 subjects (even sexes distribution), aged 15.1 ±â€…2.5 years, were included. Miniscrew (n = 104) insertion planning was performed using lateral cephalograms superimposed on the maxillary intraoral scans, while the assessment of their bicortical placement, length in bone, contact with adjacent teeth, incisive canal, and nasal floor perforation was done on corresponding superimposed CBCT images. Moreover, maxillary incisor inclination, crowding, and the maxillary intercanine width were measured. RESULTS: The overall miniscrew length in bone was 7.2 ±â€…1.3mm. Bicortical placement was seen in 58.7% of the sample (38.5% of subjects). Incisive canal and nasal floor perforation was seen in 25% and 21.2% of subjects, respectively. No contact of the miniscrew with adjacent teeth was recorded. A negative significant interaction was seen between the miniscrew length in bone, the percentage of total miniscrew length and maxillary anterior teeth crowding (ß, -0.10, P = .047 and ß, -0.90, P = .006, respectively). Moreover, a positive significant interaction was seen between the incisive canal perforation and maxillary anterior teeth crowding (OR = 1.32, P = .021). LIMITATIONS: Exclusion of subjects with impacted teeth. CONCLUSIONS: Miniscrew insertion planning using lateral cephalograms, despite being safe in preventing contact with adjacent teeth, is limited in achieving bicortical placement and insufficient in completely avoiding incisive canal and nasal floor perforation.

Palate shape is associated with Unilateral Hypoglossal Nerve Stimulation Outcomes.

OBJECTIVE: The aim was to determine the potential association between palate shape and unilateral hypoglossal nerve stimulation (HNS) outcomes. METHODS: Preoperative drug-induced sleep endoscopy (DISE) videos were reviewed and scored by 3 blinded reviewers to determine airway narrowing at the hard-soft palate junction (HP), soft palate genu, and inferior velum, as described by Woodson (2014). Scoring was as follows: 1-open airway, 2-narrow, 3-severe narrowing. Overall palate shape (oblique, intermediate, or vertical) was determined based on prior criteria. Successful surgical treatment was defined by the HNS titration polysomnogram as a reduction of ≥50% in the apnea-hypopnea index (AHI) to <15 events/h. RESULTS: Of 332 adults, the majority was male (77%) with an average BMI of 29.2 ± 3.6 kg/m2 . Overall success rate was 73%. Success rate was lower in patients with vertical palate shape compared with the other shapes (56% vs. 75%, p = 0.029). HP score 3 compared with scores 2 and 1 was associated with lower success rates (60% vs. 76%, p = 0.028), but genu and velum scores were not associated with outcomes. Patients with both HP score 3 and complete oropharyngeal lateral wall-related obstruction had notably worse outcomes (22% vs. 74%, p = 0.026). HP score 3 (OR 0.45, 95%CI 0.22-0.92) and vertical palate shape (OR 0.33, 95%CI 0.15-0.78) were independently associated with lower odds of surgical response after adjustment for DISE findings, age, gender, and BMI. CONCLUSION: Vertical palate shape and narrowing at the hard-soft palate junction are independently associated with lower HNS surgical success rates. LEVEL OF EVIDENCE: 3 Laryngoscope, 134:981-986, 2024.

Unraveling a Major Burden of Orofacial Clefts Analyses: Classification of Cleft Palate Fistulas by Cleft Surgeons.

OBJECTIVE: The objective of this study was to investigate how cleft surgeons classify palatal fistulas. We focused on three different anatomical locations (ie, hard palate, soft palate, junction hard/soft palate) to analyze agreement/disagreement at various anatomical locations. DESIGN: Cross-sectional survey study. PARTICIPANTS: Participants in an international webinar that focused on palatal fistula treatment were included. INTERVENTION: Participants were presented with a survey pre- and post-webinar. MAIN OUTCOMES: Frequency of used classification systems for classifying oronasal fistulas and the inter-rater reliability of the Pittsburgh classification system. RESULTS: A total of 141 participants completed the questionnaires prior to the webinar and 109 participants completed the survey after the webinar. In total, four classification systems were used (ie, Pittsburgh, Pakistan Comprehensive Fistula Classification [PCFC], anatomical and 'other'). The Pittsburgh classification was the most commonly used system in all cases. However, Pittsburgh inter-rater reliability was low (κ = 0.136 pre-webinar, and κ = 0.174 post-webinar). Surprisingly, a substantial shift was observed from the anatomical to Pittsburgh classification after the webinar, indicating increased awareness of the usability of the Pittsburgh classification system. CONCLUSIONS: This study demonstrates a large heterogeneity with regards to the classification of cleft palate fistulas. Interestingly, a shift was observed from the anatomical to Pittsburgh classification after the webinar. However, the inter-rater reliability for using the Pittsburgh classification was low. Classifying palatal fistulas in a homogenous fashion could enhance comparison of primary palate repair and could improve treatment of palatal fistulas.

A morphometric approach to morphology analysis of palatal rugae in sibling groups.

Recent advances in imaging technologies, such as intra-oral surface scanning, have rapidly generated large datasets of high-resolution three-dimensional (3D) sample reconstructions. These datasets contain a wealth of phenotypic information that can provide an understanding of morphological variation and evolution. The geometric morphometric method (GMM) with landmarks and the development of sliding and surface semilandmark techniques has greatly enhanced the quantification of shape. This study aimed to determine whether there are significant differences in 3D palatal rugae shape between siblings. Digital casts representing 25 pairs of full siblings from each group, male-male (MM), female-female (FF), and female-male (FM), were digitized and transferred to a GM system. The palatal rugae were determined, quantified, and visualized using GMM computational tools with MorphoJ software (University of Manchester). Principal component analysis (PCA) and canonical variates analysis (CVA) were employed to analyze palatal rugae shape variability and distinguish between sibling groups based on shape. Additionally, regression analysis examined the potential impact of shape on palatal rugae. The study revealed that the palatal rugae shape covered the first nine of the PCA by 71.3%. In addition, the size of the palatal rugae has a negligible impact on its shape. Whilst palatal rugae are known for their individuality, it is noteworthy that three palatal rugae (right first, right second, and left third) can differentiate sibling groups, which may be attributed to genetics. Therefore, it is suggested that palatal rugae morphology can serve as forensic identification for siblings.