Effect of Linoleic and Linolenic Acid Contents on the Oxidation Stability of Interesterified Fats under Rancimat Test Conditions.

This study aimed to better understand the association between the amount of polyunsaturated fatty acids, namely, linoleic acid (LA) and linolenic acid (LNA), and the increases in the peroxide value that results from storing interesterified fats, which are used as sources of solid fats in edible oil and fat products, at high temperatures. Six interesterified fats with different LA and LNA contents were prepared and oxidized at 50°C, 60°C, 70°C, and 80°C under Rancimat test conditions. The oxidation rate increased with LA and LNA contents and increasing temperature. The oxidation kinetic analysis during the early oxidation stages demonstrated that when LA and LNA exceeded 8% and 2% respectively, the oxidative stability decreased as expected. However, the total LA and LNA contents had a higher correlation with the reaction rate constant [k (meq kg-1 h-1 )] than each amount of LA and LNA contained therein. In other words, the oxidation stability of the interesterified fats used in this study depended on the total LA and LNA contents.

Developing a novel ultraselective and ultrasensitive label-free direct spectrofluorimetric nanobiosensor for direct highly fast field detection of explosive triacetone triperoxide.

BACKGROUND: Direct detection of the notorious explosive triacetone triperoxide (TATP) is very difficult because it lacks facile ionization and UV absorbance or fluorescence. Besides, the current indirect methods are time-consuming and need a pre-step for TATP cleavage to hydrogen peroxide. Moreover, they commonly show significant false-positive results in the presence of some camouflage which limits their field applications. Herein, for the first time, a novel label-free field-applicable spectrofluorimetric nanobiosensor was developed for direct TATP detection using a novel activated-protein protected gold nanocluster (ABSA-AuNCs; QY = 28.3 %) synthesized by a combined protein-assisted-ultrasonication procedure. RESULTS: The ABSA-AuNCs revealed a fluorescence spectrum centered at 330.0 nm which was significantly quenched by TATP (binding constant = 154.06 M-1; ΔG = -12.5 kJ mol-1; E(%) = 88.5 %). This phenomenon was used as a basis for direct TATP quantification, providing a working range of 0.01-40.0 mg L-1 and a detection limit of 6.7 µg L-1 which is the lowest LOD provided for TATP detection up to now. A %RSD of 0.9 % and 1.56 % was obtained for repeatability and inter-day reproducibility, respectively. The selectivity was checked against a variety of camouflages, revealing ultra-selectivity. Several synthetic samples prepared by several camouflages and real samples (clay soil and real water media) were analyzed, revealing quantitative recoveries of TATP. SIGNIFICANCE: During the production of the notorious explosive TATP, it can be discharged into water and soil. This novel method eliminated the false-positive results of traditional methods and is applicable for direct quantitative detection of camouflaged TATP and its residues in real soil and water samples in a highly short response time (2 min). The camouflaged TATP analysis is important for tracking the terrorist attacks in field conditions and analysis of soil and water can provide a first indication of the location of the production site.

Comparative understanding of peroxide quantitation assays: a case study with peptide drug product degradation.

Peroxide-mediated oxidation of drug molecules is a known challenge faced throughout the pharmaceutical development pathway-from early-stage stability studies to manufacturing processes. During the initial development stage, the major source of peroxide is the formulation excipients, whether they are pre-loaded or generated in situ due to slow degradation, and in the late phase, peroxides can be introduced during sanitization processes or generated via cavitation. In essence, a control strategy for peroxide mitigation often becomes a critical quality attribute for successful drug development. To this end, quantitation of peroxide is essential to monitor the peroxide level to ensure product quality and proposed shelf-life. However, methods for reliable and robust quantitation to detect trace levels of peroxide in a complex drug product matrix become increasingly challenging. This article discusses three high-throughput assays based on absorbance, fluorescence and chemiluminescence measurements to detect peroxide at a low level and compares the methods through validation studies in water. Selected methods have also been tested to understand the forced degradation of model peptide drug products with spiked hydrogen peroxide. Peptide degradation profiles and residual peroxide levels are presented to provide an understanding of the suitability of the quantitation methods and their performance.

Evaluation of the qualitative properties of the oil extracted from the mixture of Helianthus annuus and Nigella sativa seeds during heating.

The oil obtained from black cumin (Nigella sativa) seeds has many health-effective properties, which is used in food applications and in traditional medicine. One practical method to extract its oil is mixing with other seeds such as sunflower (Helianthus anuus) seeds before oil extraction by press. The effectiveness of the cold-press oil obtained from the mixture of black cumin seeds (BS) and sunflower seeds (SF) in different proportions 100:0, 95:5, 90:10, 85:15 and 0:100 (w/w) was studied to evaluate their qualitative properties including peroxide value (PV), acid value, p-anisidine value (AnV), pigments (carotenoid and chlorophyll) content, polyphenols, and profile of fatty acids during heating process (30-150 min at 180 °C). The results revealed that the acid and p-anisidine value of the all samples enhanced with the extension of the heating time, and the peroxide value increased at the beginning of the heating and then decreased with the prolongation of the heating time (p < .05). With the increase of temperature and heating time, the peroxide of sunflower oil increased with a higher slope and speed than that of black seed and blends oil. Changes in the PV and AnV were the fastest in sunflower oil. Blending and heating caused considerable changes in the fatty acid composition of oils, especially myristic, palmitic, and stearic acids. Moreover, the levels of certain unsaturated fatty acids, namely linoleic, oleic, and linolenic acids declined after heating. The carotenoids, chlorophyll and total phenol content decreased gradually during heating treatments. Among extracted oils, SF:BS (15%) had the good potential for stability, with total phenol content of 95.92 (Caffeic acid equivalents/100 g), PV of 2.16 (meq O2/kg), AV of 2.59 (mg KOH/g oil), and AnV of 8.08 after the heating. In conclusion, oil extracted from the mixture of SF and BS can be used as salad and cooking oils with a high content of bioactive components and positive nutritional properties.

Dimeric product formation in the self-reaction of small peroxy radicals using synchrotron radiation vacuum ultraviolet photoionization mass spectrometry.

Peroxy radicals (RO2) are key reactive intermediates in atmospheric oxidation processes and yet their chemistry is not fully unraveled. Little is known about their structures and the structures of the dimeric products (ROOR) in the self-reaction of small RO2, which are among the most abundant RO2 in the atmosphere. The product branching ratios of ROOR and their atmospheric roles are still in controversy. Here, the self-reaction of propyl peroxy radicals (C3H7O2), a typical small RO2 radical in the atmosphere, has been studied using synchrotron radiation vacuum ultraviolet photoionization mass spectrometry. Both radical (C3H7O) and closed-shell molecular (C3H6O, C3H7OH, C3H7OOC3H7) products in the self-reaction are observed in photoionization mass spectra and their elusive isomers are definitely identified in mass-selected photoionization spectra. Three isomers of the C3H7OOC3H7 dimeric products, R1OOR1, R1OOR2, and R2OOR2 (R1 and R2 represent 1-C3H7 and 2-C3H7, respectively), as well as their complex structures have been determined for the first time. Kinetic experiments are performed and compared with chemical simulations to reveal the sources of specific products. The branching ratio of the C3H7OOC3H7 dimeric channel is measured at 10 ± 5%. This work demonstrates that the dimeric product formation in the self-reaction of small RO2 radicals is non-negligible and should provide valuable new insight into atmospheric modelling.

Comparative Study of Camellia oleifera Seed Oil on Chemical Constituents, Antioxidant Activities and Physicochemical Characteristics from Southern China.

Eleven kinds of Camellia oleifera seed oils (CSOs) were evaluated in terms of chemical constituents, antioxidant activities, acid value (AV) as well as peroxide value (POV). These CSOs contained abundant ß-sitosterol, squalene, α-tocopherol and phenolics, in which the squalene was the distinct constituent with the content between 45.8±0.8 and 184.1±5.5 mg/kg. The ß-sitosterol ranging from 143.7±4.8 to 1704.6±72.0 mg/kg contributed a considerable content to total accompaniments. Palmitic acid, stearic acid, oleic acid, linoleic acid and linolenic acid were present in these CSOs, in which the dominant fatty acid was oleic acid with the content between 59.66±0.72 and 82.89±2.16 g/100 g. The AV ranged from 0.1±0.0 to 1.3±0.0 mg KOH/g, and the POV was between 0.1±0.0 and 1.0±0.0 g/100 g. These CSOs showed antioxidant activity based on DPPH and ABTS radical scavenging assay. Both α-tocopherol and ß-sitosterol contents showed a positive correlation with DPPH and ABTS values, respectively, while the α-tocopherol content showed a negative correlation with AV. These results suggested that CSO can be categorized into high oleic acid vegetable oil with abundant active constituents, of which the quality presented variation among different origins. These accompaniments may contribute to the delay of its quality deterioration.

Improving water quality and mitigating CH4 and N2O production in urban landscape water simultaneously by optimizing calcium peroxide dosage.

Recent studies show that greenhouse gas (GHG) emissions from urban landscape water are significant and cannot be overlooked, underscoring the need to develop effective strategies for mitigating GHG production from global freshwater systems. Calcium peroxide (CaO2) is commonly used as an eco-friendly reagent for controlling eutrophication in water bodies, but whether CaO2 can reduce GHG emissions remains unclear. This study investigated the effects of CaO2 dosage on the production of methane (CH4) and nitrous oxide (N2O) in urban landscape water under anoxic conditions during summer. The findings reveal that CaO2 addition not only improved the physicochemical and organoleptic properties of simulated urban landscape water but also reduced N2O production by inhibiting the activity of denitrifying bacteria across various dosages. Moreover, CaO2 exhibited selective effects on methanogens. Specifically, the abundance of acetoclastic methanogen Methanosaeta and methylotrophic methanogen Candidatus_Methanofastidiosum increased whereas the abundance of the hydrogenotrophic methanogen Methanoregula decreased at low, medium, and high dosages, leading to higher CH4 production at increased CaO2 dosage. A comprehensive multi-objective evaluation indicated that an optimal dosage of 60 g CaO2/m2 achieved 41.21 % and 84.40 % reductions in CH4 and N2O production, respectively, over a 50-day period compared to the control. This paper not only introduces a novel approach for controlling the production of GHGs, such as CH4 and N2O, from urban landscape water but also suggests a methodology for optimizing CaO2 dosage, providing valuable insights for its practical application.

Towards maintaining canine training aid integrity: Effects of environmental factors and operational use on the triacetone triperoxide polymer odor capture-and-release system.

There are many factors that may affect the longevity of or guide the use of canine training aids. Literature to date has mainly focused on identifying the headspace volatiles associated with training aids or odors and only minimal research exists into how different variables may alter those volatiles. The current study examines several factors affecting canine training aids: humidity, air flow, transportation, and operational deployment, using the triacetone triperoxide polymer odor capture-and-release canine training aid (TATP POCR) as the target. The TATP POCR is an absorption-based canine training aid developed to be used to safely train canines to detect the odor of the explosive TATP in operational settings. Comparisons of the TATP POCR to neat TATP are made throughout the manuscript. First, humidity increased the background components of the POCR matrix, as well as the amount of TATP recovered was above the POCR. Humidity thus affected the amount of TATP detected but did not prevent detection. Second, air flow lessened the lifetime of the TATP POCR. Third, the practice of using primary and secondary containment successfully prevented contamination, cross-contamination, and significant target loss, thereby maintaining kit integrity. Finally, the absorption of background odors from training environments was not observed. TATP headspace concentrations between a Deployed and Control POCR kit were not significantly different at time 0 (i.e., upon opening), which suggests that the operational use does not affect the function of the TATP POCR system. This information provides pivotal evidence for explosives detection canine handlers or trainers who utilize the TATP POCR.

Effect and mechanism of iron-carbon micro-electrolysis pretreatment of organic peroxide production wastewater.

The wastewater from organic peroxide production has high chemical oxygen demand (COD) concentration and poor biodegradability, so it is necessary to find a cost-effective treatment method. The iron-carbon microelectrolysis (IC-ME) technology was used to pretreat the organic peroxide production wastewater, and the influence of reaction conditions on the removal effect of pollutants and the degradation mechanism were studied. The effects of initial pH, iron filings, iron-carbon ratio, and reaction time on the wastewater treatment were investigated by single-factor and response surface optimization experiments, and the degradation mechanism was analyzed by three-dimensional fluorescence spectroscopy, UV-Vis, and gas chromatography mass spectrometry (GC-MS). The experimental results showed that the COD removal efficiency was 35.67% and the biodegradability of wastewater was increased from 0.113 to 0.173 under the conditions of initial pH of 3.1, the dosage of iron filings of 30.5 g/L, the ratio of iron-carbon of 1.01, and the reaction time of 122.8 min, and the process of IC-ME for degrading COD of wastewater from the production of organic peroxide was consistent with the secondary reaction. The IC-ME process could decompose macromolecular organic compounds such as tyrosine proteins and aromatic proteins, and improve the biodegradability of wastewater. It provides a theoretical reference for the practical application of IC-ME to treat this type of wastewater.

Effects of Bacterioruberin-Rich Haloarchaeal Carotenoid Extract on the Thermal and Oxidative Stabilities of Fish Oil.

This study aimed to assess the efficacy of a bacterioruberin-rich carotenoid extract (HAE) derived from the halophilic archaea Halorubrum ezzemoulense DSM 19316 in protecting crude fish oil against thermal oxidation. The research used fish oil derived from anchovies, which had a peroxide value (PV) of 6.44 ± 0.81 meq O2 kg-1. To assess the impact of HAE on the thermal stability and post-oxidation characteristics of fish oil, several concentrations of HAE were added to the fish oil samples: 0 ppm (no additive) (HAE0), 50 ppm (HAE50), 100 ppm (HAE100), 500 ppm (HAE500), and 1000 ppm (HAE1000). Furthermore, a control group was established with the addition of 100 ppm butylated hydroxytoluene (BHT100) in order to evaluate the effectiveness of HAE with a synthetic antioxidant that is commercially available. Prior to the fast oxidation experiment, thermogravimetric analysis was conducted on samples from all experimental groups. At the conclusion of the examination, it was seen that the HAE500 and HAE1000 groups exhibited a delay in the degradation temperature. The experimental groups underwent oxidation at a temperature of 55.0 ± 0.5 °C for a duration of 96 h. The measurement of PV was conducted every 24 h during this time. PV in all experimental groups exhibited a time-dependent rise (p < 0.05). However, the HAE500 group had the lowest PV measurement at the conclusion of the 96 h period (p < 0.05). Significant disparities were detected in the fatty acid compositions of the experimental groups at the completion of the oxidation experiment. The HAE500 group exhibited the highest levels of EPA, DHA, and ΣPUFA at the end of oxidation, with statistical significance (p < 0.05). Through the examination of volatile component analysis, specifically an oxidation marker, it was shown that the HAE500 group exhibited the lowest level of volatile components (p < 0.05). Consequently, it was concluded that the addition of HAE to fish oil provided superior protection compared to BHT at an equivalent rate. Moreover, the group that used 500 ppm HAE demonstrated the highest level of performance in the investigation.

Hydrogen peroxide oxidation modifies the structural properties and allergenicity of the bee pollen allergen profilin.

Bee pollen is a byproduct of pollination, which is a necessary process to produce foods. However, bee pollen can induce significant food-borne allergies. We previously identified a bee pollen-derived pan-allergen in the profilin family, Bra c p. Herein, we aimed to reduce Bra c p allergenicity via protein oxidation with hydrogen peroxide and explore the changes induced. Ion-mobility mass spectrometry revealed aggregation of the oxidized product; we also found irreversible sulfonation of the free sulfhydryl group of the Bra c p Cys98 residue to a more stable cysteine derivative. A significant proportion of the α-helices in Bra c p were transformed into ß-sheets after oxidation, masking the antigenic epitopes. An immunoassay demonstrated that the IgE-binding affinity of Bra c p was decreased in vitro after oxidation. To our knowledge, this is the first report describing the application of protein oxidation to reduce the allergenicity of profilin family member in foods.

Toward maintaining canine training aid integrity: Visualizing contamination and testing storage materials for a non-hazardous canine training aid.

Contamination of canine training aids is a pervasive issue that may lead to incorrect canine discrimination of target odors. It is therefore important to properly store training materials to maintain their integrity and efficiency. First, this study demonstrated the potential for contamination using GloGerm™ as a proxy for odor/particulate transfer. Then, eight types of containers were evaluated to determine (1) the ability to prevent odor permeation and (2) the likelihood of maintaining the ab/adsorbed odor. Lastly, a longitudinal study evaluated how the permeation of the target odor changed over time. Analysis occurred using a direct analysis in real-time mass spectrometer (DART-MS) to detect triacetone triperoxide (TATP) from the non-hazardous canine training aid known as the polymer odor capture-and-release (POCR) system. Results showed that Mylar and Opsak bags were most effective for short-term storage, maintaining low levels of ab/adsorption. Over time, the amount of TATP permeating through the primary containers and collecting in a secondary container (i.e., outer packaging) increased at 1 week and decreased thereafter (up to 4 months). The amount of TATP collecting in the primary containers, however, increased up to 1 month and decreased thereafter.

Potential of indigenous plants seed extracts of Anisophyllea boehmii and Aframomum sanguineum from Burundi to protect against oil oxidation.

The objective of seed extracts from Anisophyllea boehmii and Aframomum sanguineum were to evaluate their ability to stabilize against oxidation of oils exposed to sunlight on one hand and subjected to high temperatures on the other hand. Determination of the peroxide value (PV) showed that the extracts had reduced the oxidation of sunflower oils. After 8 weeks of sunlight exposure, the concentration of 265.45 mg/l of A. boehmii extract showed a PV of 30.78 meq O2/kg, 67.4 mg/l extract of A. sanguineum had a PV of 42.75 meq O2/kg while the oils without extracts had a very high PV (125.06 meq O2/kg). Heating of the oils to 180°C for 8 hours was found, with A. boehmii extract (265.45 mg/l), to have a PV of 29.66 meq O2/kg, with that of A. sanguineum, while the PV of the oils without extract reached 50.66 meq O2/kg. In the light of these results, the seeds of A. boehmii and A. sanguineum contain antioxydant compounds, which, once extracted, can be used for many purposes in the food processing, pharmaceutical and cosmetic industries.

Colorimetric determination of peroxide value in vegetable oils using a paper based analytical device.

Peroxide value (PV) is one of the most typically used quality parameters to monitor lipid oxidation. Here, a simple paper-based analytical device (PAD) has been developed to determine PV in vegetable oils. The analysis is based on setting up the iodometric titration, where hydroperoxides in the oil are reacted with excess iodide ions to generate iodine molecules, on the paper substrate. The device is composed of two paper layers acting as reaction and detection zones, aligned in a metallic mold. A well-defined inverse logarithmic calibration curve was established between the measured PV by the official iodometric method (ISO;3960, 2017) and the color intensity of PAD. It offered a working range of 0.01-30.0 meq/Kg. The limit of detection of 0.015 meq/Kg demonstrated enough sensitivity of the method to estimate peroxide value in edible oils. On-site and visual detection, low cost, simplicity, and less solvent consumption are advantages of the proposed device.

1H LF-NMR Self-Diffusion Measurements for Rapid Monitoring of an Edible Oil's Food Quality with Respect to Its Oxidation Status.

The food quality of edible oils is dependent on basic chemical and structural changes that can occur by oxidation during preparation and storage. A rapid and efficient analytical method of the different steps of oil oxidation is described using a time-domain nuclear magnetic resonance (TD-NMR) sensor for measuring signals related to the chemical and physical properties of the oil. The degree of thermal oxidation of edible oils at 80 °C was measured by the conventional methodologies of peroxide and aldehyde analysis. Intact non-modified samples of the same oils were more rapidly analyzed for oxidation using a TD-NMR sensor for 2D T1-T2 and self-diffusion (D) measurements. A good linear correlation between the D values and the conventional chemical analysis was achieved, with the highest correlation of R2 = 0.8536 for the D vs. the aldehyde concentrations during the thermal oxidation of poly-unsaturated linseed oils, the oil most susceptible to oxidation. A good correlation between the D and aldehyde levels was also achieved for all the other oils. The possibility to simplify and minimize the time of oxidative analysis using the TD NMR sensors D values is discussed as an indicator of the oil's oxidation quality, as a rapid and accurate methodology for the oil industry.

Effects of Ligustrum robustum (Rxob.) Blume extract on the quality of peanut and palm oils during storage and frying process.

The potential uses of Ligustrum robustum (Rxob.) Blume extract as a natural antioxidant to protect the quality of different oils during storage and frying process were studied. The results showed that L. robustum extract has been shown to retard the decline in the quality of both oils based on the tests of acid value, peroxide value, p-anisidine value, color, volatile flavor, and fatty acid compositions, and the protective effect of L. robustum extract on the quality of peanut oil was better than that of palm oil. By the component analysis, L. robustum extract was found to have a total phenols content of 140.75 ± 1.52 mg/g, and ligurobustoside C was identified as the main phenolic compound. The thermogravimetric and differential scanning calorimetry results showed that L. robustum extract enhanced the oxidative stability of peanut and palm oils. In addition, Fourier transform infrared results indicated that L. robustum extract had protective effects on the C=C bond and ester bond of oil molecule. Moreover, by using electron spin resonance technique, L. robustum extract showed the ability to inhibit and scavenge alkyl-free radicals in both oils. The present results suggested that L. robustum extract may protect the quality of oils during the storage and frying process by inhibiting the oxidation of unsaturated fatty acids and might be a potential natural antioxidant in the food industry. PRACTICAL APPLICATIONS: The excellent antioxidant ability of Ligustrum robustum (Rxob.) Blume extract on the oxidation of different oils and its low price indicated that it could be used as a new low-cost natural antioxidant in oil processing.

Evaluation of the Effect of Elite Jojoba Lines on the Chemical Properties of their Seed Oil.

Jojoba oil (JO) extracted from seeds has outstanding properties, including anti-inflammatory, antioxidant, and antibacterial activities, and can be stored forlong periodsof time. The unique properties of jojoba oil depend on its chemical composition; therefore, the effect of the jojoba genotype on the chemical properties and active components of the seed oil was evaluated in this study. Oil samples were collected from 15 elite Egyptian jojoba lines. The chemical composition, such as moisture, crude fiber, crude oil, ash, and crude protein of elite lines' seeds was determined to investigate the variation among them based on the jojoba genotype. In addition, the iodine value was obtained to measure the degree of jojoba oil unsaturation, whereas the peroxide number was determined as an indicator of the damage level in jojoba oil. Fatty acid composition was studied to compare elite jojoba lines. Fatty acid profiles varied significantly depending on the jojoba genotype. Gadoleic acid exhibited the highest percentage value (67.85-75.50%) in the extracted jojoba oil, followed by erucic acid (12.60-14.81%) and oleic acid (7.86-10.99%). The iodine value, peroxide number, and fatty acid composition of the tested elite jojoba lines were compared withthose reported by the International Jojoba Export Council (IJEC). The results showed that the chemical properties of jojoba oils varied significantly, depending on the jojoba genotype.

Characterization of biofilms formed on polystyrene microplastics (PS-MPs) on the shore of the Tuul River, Mongolia.

Microplastic (MP) surfaces are common sites for microbial colonization and promote biofilm formation in aquatic environments, resulting in changes to the surface properties of MPs and their interaction with pollutants. Although the diversity of microbial communities adhering to MPs has been well documented in aquatic environments, surface changes in MPs due to microbial colonization are still poorly understood. In this study, we aimed to evaluate the variations in the chemical structure and components of biofilms on the surface of polystyrene microplastics (PS-MPs) collected from the shore of the Tuul River in Mongolia, using micro-Fourier transform infrared (micro-FTIR) spectroscopy. We applied a spectral subtraction approach, and the differences in spectra between peroxide-treated and untreated PS-MP particles enabled us to obtain the structural features of biofilms that developed on the plastic surface. In addition, the surface photooxidation status of the sampled PS-MPs was calculated from the subtracted spectra of peroxide-treated and pristine PS-MPs. Various functional groups of N-containing organic substances from bacterial and fungal communities were detected in the obtained biofilm spectra. Based on the spectral characteristics, biofilm spectra were classified into four groups by applying principal component analysis (PCA). A wide range of carbonyl indices (CIs: 0.00-1.40) was found in the subtracted spectra between peroxide-treated and pristine PS-MPs, revealing that different levels of surface oxidation progressed by physical influences such as solar radiation and freeze-thaw cycles. Furthermore, lignocellulose and silicate were found on the PS-MP surface as allochthonous attachments. Considering the variation in residence time of PS-MPs, they attract plant residues and mineral particles through the development of biofilms and travel together in the river environment. Given that the dynamic behavior of MPs can be greatly affected by changes in their surfaces, further studies are needed to emphasize their link to organic matter dynamics.

Effect of Drying Methods on Peanut Quality during Storage.

Storage is an important step after peanut harvest and drying. Many factors could affect the peanut quality during storage. The quality change differences of peanut after being dried by solar radiation and at 35°C, 40°C, 45°C, 50°C during later storage were investigated, including moisture content (MC) and germination percentage (GP) of peanut kernels, acid value (AV), peroxide value (PV), iodine value (IV), vitamin E (VE) content and fatty acid composition (FAC) of extracted peanut oil. And the impact of four storage conditions, air-room temperature (A-RT), air-low temperature (A-LT), vacuum-room temperature (V-RT) and nitrogen-room temperature (N-RT) on peanut quality after 10 months' storage were also studied in this paper. The results revealed that drying conditions had only a little influence on peanut quality during later storage. Peanut dried by solar radiation was more easily oxidized than that dried under other drying conditions. The effects of storage time were much greater. The GP, AV, PV, VE content and FAC, showed significantly changes along with storage. GP and VE content decreased, AV and PV increased, and some linoleic acid was oxidized to oleic acid after 10 months' storage. In addition, A-LT exhibited best performance in keeping peanut quality than A-RT, V-RT and N-RT, which demonstrated that low temperature was more advantageous for peanut storage than controlled atmosphere. These results above would provide useful information and reference for the peanut storage to apply in food industry.

Quantification of Hydroperoxides by Gas Chromatography with Flame Ionisation Detection.

Hydroperoxides are of great importance in the fields of atmospheric and biological chemistry. However, there are several analytical challenges in their analysis: unknown and usually low UV absorption coefficients, high reactivity, thermal instability, and a lack of available reference standards. To overcome these limitations, we propose a GC-FID approach involving pre-column silylation and quantification via the effective carbon number approach. Four hydroperoxides of α-pinene were synthesized in the liquid phase with singlet oxygen and identified using literature data on isomer yield distribution, MS spectra, estimated boiling temperatures of each isomer (retention time), their thermal stability and derivatisation rate. The developed procedure was used for the determination of hydroperoxides in bottled and autooxidised turpentine. We anticipate that this method could also be applied in atmospheric chemistry, where the reactivity of singlet oxygen could help explain the high formation rates of secondary organic aerosols.