High arsenic contamination in the breast milk of mothers inhabiting the Gangetic plains of Bihar: a major health risk to infants.

Groundwater arsenic poisoning has posed serious health hazards in the exposed population. The objective of the study is to evaluate the arsenic ingestion from breastmilk among pediatric population in Bihar. In the present study, the total women selected were n = 513. Out of which n = 378 women after consent provided their breastmilk for the study, n = 58 subjects were non-lactating but had some type of disease in them and n = 77 subjects denied for the breastmilk sample. Hence, they were selected for the women health study. In addition, urine samples from n = 184 infants' urine were collected for human arsenic exposure study. The study reveals that the arsenic content in the exposed women (in 55%) was significantly high in the breast milk against the WHO permissible limit 0.64 µg/L followed by their urine and blood samples as biological marker. Moreover, the child's urine also had arsenic content greater than the permissible limit (< 50 µg/L) in 67% of the studied children from the arsenic exposed regions. Concerningly, the rate at which arsenic is eliminated from an infant's body via urine in real time was only 50%. This arsenic exposure to young infants has caused potential risks and future health implications. Moreover, the arsenic content was also very high in the analyzed staple food samples such as rice, wheat and potato which is the major cause for arsenic contamination in breastmilk. The study advocates for prompt action to address the issue and implement stringent legislative measures in order to mitigate and eradicate this pressing problem that has implications for future generations.

Innovative lake pollution profiling: unveiling pollutant sources through advanced multivariate clustering techniques.

In many developed and developing nations, lakes are the primary source of drinking water. In the current scenario, due to rapid mobilization in anthropogenic activities, lakes are becoming increasingly contaminated. Such practices not only destroy lake ecosystems but also jeopardize human health through water-borne diseases. This study employs advanced hierarchical clustering through multivariate analysis to establish a novel method for concurrently identifying significantly polluted lakes and critical pollutants. A systematic approach has been devised to generate rotating component matrices, dendrograms, monoplots, and biplots by combining R-mode and Q-mode analyses. This enables the identification of contaminant sources and their grouping. A case study analyzing five lakes in Bengaluru, India, has been conducted to demonstrate the effectiveness of the proposed methodology. Additionally, one pristine lake from Jammu & Kashmir, India, has been included to validate the findings from the aforementioned five lakes. The study explored correlations among various physical, chemical, and biological characteristics such as temperature, pH, dissolved oxygen, conductivity, nitrates, biological oxygen demand (BOD), fecal coliform (FC), and total coliform (TC). Critical contaminants forming clusters included conductivity, nitrates, BOD, TC, and FC. Factor analysis identified four primary components that collectively accounted for 85% of the overall variance. Following identification of pollution hotspots, the study recommends source-based pollution control and integrated watershed management, which could significantly reduce lake pollution levels. Continuous monitoring of lake water quality is essential for identifying actual contaminant sources. These findings provide practical recommendations for maximizing restoration efforts, enforcing regulations on pollutant sources, and improving water quality conditions to ensure sustainable development of lakes.

Impacts of salinity stress induced by ballast water discharge on the ecosystem of shanghai port, China.

Large quantities of marine ballast water discharged by ocean-going vessels can cause salinity increases in freshwater ports, which in turn negatively affects indigenous plankton in the ports. In this study, we investigated the impacts of marine ballast water discharge on the plankton community in a freshwater wharf through field surveys. It was found that salinity stress caused reductions in community indicators such as plankton community composition, abundance and diversity, thus threatening the structure and function of the plankton community in the wharf. In terms of the impact range, the salinity stress had a significant effect on all plankton in the waters near the discharge point and the phytoplankton in the waters 50 m from the discharge point, but had no significant effect on the plankton in the waters further away. Ballast water discharge also caused a significant decrease in the alpha diversity and richness of the plankton community but had no significant effect on the evenness of the plankton community. Moreover, phytoplankton were more tolerant of salinity changes than zooplankton in our study. This study provides an ecological reference for the scientific management of marine ballast water discharge and the risk of exogenous nutrient inputs to freshwater ecosystems.

Microplastics and their interaction with microorganisms in Bosten Lake sediment.

Microplastics (MPs), discovered in oceans, lakes, and rivers, can infiltrate the food chain through ingestion by organisms, potentially posing health risks. Our research is the first to study the composition and distribution of MPs in Bosten Lake's sediment. In May, the average abundance of MPs was 0.95±0.72 particles per 10 gs, and in October, it was 0.90±0.61 particles per 10 gs. Bohu Town had the highest MP abundance, with 1.75±0.35 particles per 10 gs in spring and 2 ± 0 particles per 10 gs in autumn. In May, 53 % of the MPs were transparent, while in October, black MPs constituted 58 %. The predominant morphology was fibrous, accounting for 61 % of the total. MPs in the size range of 0.2-1 mm made up 91 % and 66 % of the total in May and October, respectively. The most common types of MPs in May were polyethylene terephthalate (PET) at 40 % and polyethylene (PE) at 26 %. In October, PET was the most prevalent at 71 %, followed by poly(ether-ether-ketone)(PEEK) at 11 %. Certain microbial taxa, such as Actinobacteriota, Pseudomonas, and Vicinamibacteraceae, associated with MP degradation or complex carbon chain breakdown, were notably enriched in sediment areas with high MP concentrations. A significant positive correlation was observed between the abundance of MPs in sediments and Actinobacteriota. Additionally, the abundance of Thiobacillus, Ca.competibacter, and other bacteria involved in soil element cycling showed a significant positive correlation with the organic matter content in the sediments. Anaerobic bacteria like Thermoanaerobacterium displayed a significant positive correlation with water depth. Our study reveals the presence, composition, and distribution of MPs in Bosten Lake's sediments, shedding light on their potential ecological impact.

Evaluating the surface water pollution risk of mineral resource exploitation via an improved approach: a case study in Liaoning Province, Northeastern China.

Pollution from mineral exploitation is an important risk factor affecting surface water environment in mineral regions. It is urgent to construct a simple and accurate model to assess the surface water pollution risk from mineral exploitation in the regional scale. Thus, taking a mining province namely Liaoning in northeastern China as the study area, we proposed a framework to simulate the transport process of pollutants from mineral exploitation points to the surrounding surface water based on the "source-sink" theory. In our framework, we adopted the regional growth method (RGM) to extract the potential polluted water area as the certain "sink" considering the influence of the topography, and then applied Minimum Cumulative Resistance (MCR) model to assess the surface water pollution risk from mineral exploitation. The results revealed that: (1) 9.5% of the water areas were located at the potential impact area of MEPs. (2) The total value of resistance surface in Liaoning is relatively low, and gradually decreased from west to east. (3) MEPs in Liaoning had a high risk and seriously threatened the surface water environment, among 2125 MEPs, 733 MEPs (32.99%) were assessed as extremely high risk level, and about 35% of the MEPs were distributed within 10KM buffer zone of surface water. (4) Water pollution risk of MEPs in Dalian, Tieling, Fuxin and Dandong need to be emphasized. (5) Compared to previous studies, we considered the topographical influence before applying MCR model directly, so the results of water pollution risk were more reliable. This study provides a methodological support and scientific reference for the water environment protection and regional sustainable development.

Frontal processes as drivers of floating marine debris in coastal areas.

The influence of floating marine debris (FMD) on coastal and marine communities and ecosystems is undeniable, and attention is increasingly focused on ecologically and biologically important coastal areas. To protect marine life and valuable resources from FMD pollution, identifying FMD accumulation zones is recognized as a priority. One of the coastal ocean processes found governing the distribution of FMD is water convergence (frontal zones). These fronts are driven by various oceanographical factors. To date, the transport and accumulation of FMD in relation to fronts in coastal areas is poorly understood. To address this knowledge gap, we reviewed various types of ocean fronts as well as FMD accumulation along frontal zones in coastal areas defined as the region between the coastline and the shelf break. Frontogenesis (physical processes related to frontal formation) were reviewed alongside studies on FMD accumulation in frontal zones to identify physical factors that drive the pathways and accumulation in these areas. This review will contribute to our understanding of accumulation hotspots of FMD within ocean fronts and identify gaps for further research on developing a proxy for FMD hotspot identification in ecologically important coastal areas.

Greenhouse gas emission potential of tropical coastal sediments in densely urbanized area inferred from metabarcoding microbial community data.

Although benthic microbial community offers crucial insights into ecosystem services, they are underestimated for coastal sediment monitoring. Sepetiba Bay (SB) in Rio de Janeiro, Brazil, holds long-term metal pollution. Currently, SB pollution is majorly driven by domestic effluents discharge. Here, functional prediction analysis inferred from 16S rRNA gene metabarcoding data reveals the energy metabolism profiles of benthic microbial assemblages along the metal pollution gradient. Methanogenesis, denitrification, and N2 fixation emerge as dominant pathways in the eutrophic/polluted internal sector (Spearman; p < 0.05). These metabolisms act in the natural attenuation of sedimentary pollutants. The methane (CH4) emission (mcr genes) potential was found more abundant in the internal sector, while the external sector exhibited higher CH4 consumption (pmo + mmo genes) potential. Methanofastidiosales and Exiguobacterium, possibly involved in CH4 emission and associated with CH4 consumers respectively, are the main taxa detected in SB. Furthermore, SB exhibits higher nitrous oxide (N2O) emission potential since the norB/C gene proportions surpass nosZ up to 4 times. Blastopirellula was identified as the main responsible for N2O emissions. This study reveals fundamental contributions of the prokaryotic community to functions involved in greenhouse gas emissions, unveiling their possible use as sentinels for ecosystem monitoring.

Interannual variability in marine debris accumulation on Hawaiian shores: The role of North Pacific Ocean basin-scale dynamics.

Community-based marine debris removal efforts on the Hawaiian Islands of Kaua'i and Hawai'i, spanning 2013-2022, provided large datasets and documented remarkable variations in annual amounts of debris, mainly from abandoned, lost and derelict fishing gear. To test the hypothesis that the influx of marine debris on Hawaiian shores is determined by the proximity of the North Pacific garbage patch, whose pattern changes under the control of large-scale ocean dynamics, we compared these observational data with the output of an oceanographic drift model. The high correlations between the total mass of debris collected and the model, ranging between r = 0.81 and r = 0.84, validate the attribution of the strong interannual signal to significant migrations of the garbage patch reproduced in the model experiments. Synchronous variations in marine debris fluxes on the two islands, separated by >500 km, confirm the large scale of the interannual changes in the North Pacific marine debris system.

Chemodiversity in freshwater health.

Dissolved organic matter may offer a way to track and restore the health of fresh waters.

Distribution and composition of floating marine debris in Shiretoko peninsula, Japan, using opportunistic sighting survey.

Floating marine debris (FMD) poses several threats to marine species, such as entanglement, ingestion, and the transport of pollutants. The Shiretoko Peninsula, located in northern Japan, is a registered World Natural Heritage Site and a biodiversity hotspot. However, FMD has not yet been thoroughly investigated in this region. In 2022, sighting surveys were conducted in Abashiri (west side of the peninsula) and Rausu (east side) to assess the abundance, composition, and distribution of FMD. The mean densities were notably higher in Abashiri, and there was more fishing-related debris in Rausu. Regarding local human activities, the population and number of tourists are higher in Abashiri, and fishing activities are higher in Rausu. While marine pollution is a global issue, our study suggests that addressing it should commence with community-based management at the local level.

Air, land, and water pollutants and public health expenditures: Empirical data from selected EU countries in the transport sector.

The increase in economic activity, particularly in transport, leads to a significant increase in emissions of pollutants, such as ammonia, arsenic and cadmium, at the European Union (EU) level. This can seriously impact human health and, consequently, public health spending. Based on data from 15 European Union countries from 1992 to 2020, a panel co-integration approach is used to study these pollutants' short- and long-term co-movements and per capita health expenditure. The results show a long-term relationship between ammonia, arsenic and cadmium emissions and per capita health spending, as they are panel-cointegrated. Ammonia and cadmium emissions exert a statistically significant positive effect on health expenditure in the short run, and arsenic emissions have a statistically significant positive impact in the long run. The forecast assessment of reductions in health spending resulting from policies to reduce emissions of air, land and water pollutants, such as ammonia, arsenic and cadmium, from the transport sector supports investments in its policies that reduce pressure on health spending. The reduction in annual healthcare expenditure is greater when these reductions are made sooner and more severely. Indeed, varying the reduction in emissions for each pollutant by 10% and 100%, respectively, from the first year for all countries over a 3-year period results in an average annual reduction in health spending of 2.05% and 51.02%, respectively. However, if we wait until the third year, the annual reduction is only 0.77% and 17.63% respectively.

Simulations of water pollutants in the Hangzhou Bay, China: Hydrodynamics, characteristics, and sources.

China's coastal waters are confronting serious water quality problems, particularly the Hangzhou Bay in the Yangtze River Delta. To find out the underlying cause, we use the Regional Ocean Modeling System (ROMS) to simulate the hydrodynamic characteristics and the evolution of water pollutants. The results show that the hydrodynamic conditions are complicated and the semi-exchange time is 46 days, significantly hindering the dilution and diffusion of water pollutants. Concentrations of each typical pollutant as chemical oxygen demand (COD), dissolved inorganic nitrogen (DIN), and phosphate (PO4) decrease from west to east, showing an obvious enrichment in the coastal region. Source-oriented results show that the inland water pollution of the Yangtze River and the Qiantang River is the key contributor, and the sewage outfalls on the coast near the bay worsen the pollution. This suggests that the government needs to strengthen the management of sources that affect water security.

Distribution and ecological risk assessment of priority water pollutants in surface river sediments with emphasis on industrially affected areas.

Priority water pollutants comprising six plasticizers, 18 volatile organic compounds (VOCs), total petroleum hydrocarbon (TPH), 1,4-dioxane, epichlorohydrin, formaldehyde, acrylamide, and cyanides were determined in surface river sediments to assess their distribution patterns and ecological risks. Among these, di (2-ethylhexyl) phthalate (DEHP), toluene, TPH, and acrylamide were frequently found in sediments. The industrial sites had higher concentrations of ∑plasticizers (median 628 ng/g dry weight (dw)), ∑VOCs (median 3.35 ng/g dw), acrylamide (median 0.966 ng/g dw), and TPH (median 152 µg/g dw) in sediments than the mixed and non-industrial areas. The other pollutants did not show the significant differences in levels according to site types because of their relatively low detection frequencies. Volatile and soluble substances as well as hydrophobic pollutants were predominantly detected in surface sediments from industrial areas. Sediment contamination patterns were affected by the size and composition of the industrial zones around the sampling sites. The ecological risks determined using the sediment quality guidelines (DEHP, VOCs, and TPH) and the mean probable effect level quotients (DEHP) were mostly acceptable. However, the two most representative industrial regions (the largest industrial area and the first industrial city) showed risks of concern for DEHP and TPH.

Experimental study on color and texture as cues for plastic debris ingestion by captive sea turtles.

Sea turtles face considerable risks from ingesting marine debris. They are primarily visual feeders, so color may be important for identifying food suitability or enhancing prey detection. Here, we investigated the impacts of color and texture on foraging behavior in relation to plastic consumption. We experimentally assessed the influences of color and texture as attractors for sea turtles using edible jellyfish. The findings showed that the colors of objects significantly affected selective preferences, as evidenced by different behaviors by sea turtles in response to different colors. They exhibited diet-related selectivity toward colors similar to common aquarium food, and texture had a significant impact on complete ingestion. The results suggest that plastic resembling natural prey is more likely ingested. Also, sea turtles were attracted by the color yellow, suggesting that visually distinctive items can attract them. Our results provide fundamental knowledge, helping mitigate the effects of plastic pollution on wildlife.

Recent trends in wastewater treatment by using metal-organic frameworks (MOFs) and their composites: A critical view-point.

Respecting the basic need of clean and safe water on earth for every individual, it is necessary to take auspicious steps for waste-water treatment. Recently, metal-organic frameworks (MOFs) are considered as promising material because of their intrinsic features including the porosity and high surface area. Further, structural tunability of MOFs by following the principles of reticular chemistry, the MOFs can be functionalized for the high adsorption performance as well as adsorptive removal of target materials. However, there are still some major concerns associated with MOFs limiting their commercialization as promising adsorbents for waste-water treatment. The cost, toxicity and regenerability are the major issues to be addressed for MOFs to get insightful results. In this article, we have concise the current strategies to enhance the adsorption capacity of MOFs during the water-treatment for the removal of toxic dyes, pharmaceuticals, and heavy metals. Further, we have also discussed the role of metallic nodes, linkers and associated functional groups for effective removal of toxic water pollutants. In addition to conformist overview, we have critically analyzed the MOFs as adsorbents in terms of toxicity, cost and regenerability. These factors are utmost important to address before commercialization of MOFs as adsorbents for water-treatment. Finally, some future perspectives are discussed to give directions for potential research.

Microplastic removal in managed aquifer recharge using wastewater effluent.

Microplastic (MP) pollution has emerged as a pressing environmental issue, with its impacts on ecosystems and human health yet to be fully understood. This study aims to investigate the presence and distribution of MPs in the soil of a managed aquifer recharge (MAR) system, built with different reactive barriers of natural materials and irrigated with the secondary effluent of a wastewater treatment plant (WWTP). MPs were extracted from reactive barrier material following an approach based on the density separation of MPs with posterior oxidant digestion, combined with visual and chemical characterisation by Fourier-Transform Infrared Spectroscopy (FTIR). The results revealed the widespread occurrence of MPs in the MAR soil samples. MPs concentration in the different barrier materials ranged from 60 to 236 n kg-1. The most dominant morphologies were fragments (60%) and fibers (17%), and the most abundant colour was white (51%), followed by transparent MPs (20%). Polypropylene (PP) was detected in all the samples with an abundance of 47%, followed by polyethylene (PE, 34%). The interplay of barrier composition significantly influences the retention of MPs, with compost (T5) and woodchips (T4) exhibiting the most notable retention rates. Remarkably, the outer layers of the reactive barriers display superior retention compared to the deeper layers. The findings of this study demonstrate the good performance of the MAR system in retaining MPs and contribute to the growing body of knowledge on MPs pollution in freshwater systems while providing insights into the dynamics of MPs transport and accumulation in soil. Such information can inform the development of effective wastewater management strategies to mitigate the impacts of these pollutants on water resources and safeguard the environment.

Functional keystone taxa promote N and P removal of the constructed wetland to mitigate agricultural nonpoint source pollution.

Characterized by irregular spatial and temporal variations of pollutant loading and complex occurrence mechanisms, agricultural nonpoint source pollution (ANPSP) has always been a great challenge in field restoration worldwide. Returning farmlands to wetlands (RFWs) as an ecological restoration mode among various constructed wetlands was selected to manage ANPSP in this study. Triarrhena lutarioriparia, Nelumbo nucifera and Zizania latifolia monocultures were designed and the water pollutants was monitored. N. nucifera and Z. latifolia could reach the highest TN (53.28 %) and TP (53.22 %) removal efficiency, respectively. By 16s high-throughput sequencing of rhizosphere bacteria, 45 functional species were the main contributors for efficient N and P removal, and 38 functional keystone taxa (FKT) were found with significant ecological niche roles and metabolic functions. To our knowledge, this is the first study to explore the microbial driving N and P removal mechanism in response to ANPSP treated by field scale RFWs.

Green approach for the fabrication of dual-functional S/N doped graphene tagged ZnO nanograins for in vitro bioimaging and water pollutant remediation.

Dual-functional S/N (sulfur and nitrogen) doped graphene-tagged zinc oxide nanograins were synthesized for bioimaging applications and light-dependent photocatalytic activity. Applying the green synthesis approach, graphene was synthesized from kimchi cabbage through a hydrothermal process followed by tagging it with synthesized zinc oxide nanoparticles (ZnO-NPs). The 2D/0D heterostructure prepared by combining both exhibited exceptional advantages. Comprehensive characterizations such as TEM, SEM, XRD, FTIR, XPS, and UV-Vis spectra have been performed to confirm the structures and explore the properties of the synthesized nanocomposite. The graphene/ZnO-NP composite produced exhibited more intense fluorescence, greater chemical stability and biocompatibility, lower cytotoxicity, and better durability than ZnO NPs conferring them with potential applications in cellular imaging. While tagging the ZnO NPs with carbon derived from a natural source containing hydroxyl, sulfur, and nitrogen-containing functional group, the S/N doped graphene/ZnO heterostructure evidences the high photocatalytic activity under UV and visible irradiation which is 3.2 and 3.8 times higher than the as-prepared ZnO-NPs. It also demonstrated significant antibacterial activity which confers its application in removing pathogenic contaminant bacteria in water bodies. In addition, the composite had better optical properties and biocompatibility, and lower toxicity than ZnO NPs. Our findings indicate that the synthesized nanocomposite will be suitable for various biomedical and pollutant remediation due to its bright light-emitting properties and stable fluorescence.

Floating marine debris influx in the intertidal zone of offshore islands in Bangladesh: A case study of Manpura Island.

Marine Debris is all-pervading in the world's oceans. In this research, for the first time, Floating Marine Debris (FMD) accumulation in the intertidal zone of Manprua island, an offshore island of Bangladesh, is reported. The assessment has been done by integrating both physical investigations and questionnaire survey. The Study shows high debris density on the windward and river-facing sides of the island. The density of debris items in this area varies from 550,000 to 60,000 items per km2 (8.5 to 0.08 g/m2) for transect samples during low tide and 350,000 to 60,000 items per km2 (5.76 to 1.20 g/m2) for net samples during high tide. However, the most damaging debris items are uprooted trees and water hyacinths because they hinder fishing activities. This study provides baseline information on FMD in the Meghna Estuary, which can be used as a reference for sustainable monitoring and management of marine pollution.

Formulation of water pollutant discharge limits for malathion based on nonsensitive aquatic organism protection.

The "Integrated Wastewater Discharge Standard" was implemented for water pollutant discharge in China's pesticide industry, which has no control requirements for particular wastewater pollutants in the industry. In the standard, certain pollutants discharge limits are limited strictly or loosely, resulting in practical management implementation difficulties. In view of the highly selective targeting characteristics of organic pesticide active ingredients in fungicides, insecticides, and herbicides, a method for deriving discharge limits based on the water quality criteria for pesticides for the protection of nonsensitive species is established based on the idea of fully protecting aquatic organisms beyond sensitive objects. Through the use of malathion as an example, by screening its toxicity data in different species of aquatic organisms, the sequence point with the most significant change in the acute toxicity sensitivity of the species is taken as the variation point in the cumulative frequency of the sensitive and nonsensitive species to derive the water quality criteria, using the species sensitivity distribution method as the scientific basis for determining the discharge limits. After a comparative analysis of different simulation models, the sigmoid model, with the best fit, is selected to determine that the sensitive species hazard concentration (HCs) of malathion to aquatic organisms in China is 46.4 µg/L, and the discharge limit derived from the HCs based on the relationship between the environmental capacity and emissions is rounded to 250 µg/L. Studies showed that the relationship between the emissions limit derived from the water quality criteria for protecting nonsensitive species and malathion limit stipulated in the "Environmental Quality Standards for Surface Water" conforms to the corresponding relationship of the quality standard and discharge standard, which can be achieved by current pollution control technology, combined with water quality improvement. The discharge limit offers the advantages of technical accessibility and economic rationality.