Rapid Determination of SARS-CoV-2 Integrity and Infectivity by Using Propidium Monoazide Coupled with Digital Droplet PCR.

SARS-CoV-2 is a highly infectious virus responsible for the COVID-19 pandemic. Therefore, it is important to assess the risk of SARS-CoV-2 infection, especially in persistently positive patients. Rapid discrimination between infectious and non-infectious viruses aids in determining whether prevention, control, and treatment measures are necessary. For this purpose, a method was developed and utilized involving a pre-treatment with 50 µM of propidium monoazide (PMAxx, a DNA intercalant) combined with a digital droplet PCR (ddPCR). The ddPCR method was performed on 40 nasopharyngeal swabs (NPSs) both before and after treatment with PMAxx, revealing a reduction in the viral load at a mean of 0.9 Log copies/mL (SD ± 0.6 Log copies/mL). Furthermore, six samples were stratified based on the Ct values of SARS-CoV-2 RNA (Ct < 20, 20 < Ct < 30, Ct > 30) and analyzed to compare the results obtained via a ddPCR with viral isolation and a negative-chain PCR. Of the five samples found positive via a ddPCR after the PMAxx treatment, two of the samples showed the highest post-treatment SARS-CoV-2 loads. The virus was isolated in vitro from both samples and the negative strand chains were detected. In three NPS samples, SARS CoV-2 was present post-treatment at a low level; it was not isolated in vitro, and, when detected, the strand was negative. Our results indicate that the established method is useful for determining whether the SARS-CoV-2 within positive NPS samples is intact and capable of causing infection.

The surface modification of the silica-coated magnetic nanoparticles and their application in molecular diagnostics of virus infection.

The study presents a series of examples of magnetic nanoparticle systems designed for the diagnosis of viral diseases. In this interdisciplinary work, we describe one of the most comprehensive synthetic approaches for the preparation and functionalization of smart nanoparticle systems for rapid and effective RT-PCR diagnostics and isolation of viral RNA. Twelve different organic ligands and inorganic porous silica were used for surface functionalization of the Fe3O4 magnetic core to increase the number of active centres for efficient RNA binding from human swab samples. Different nanoparticle systems with common beads were characterized by HRTEM, SEM, FT-IR, XRD, XPS and magnetic measurements. We demonstrate the application of the fundamental models modified to fit the experimental zero-field cooling magnetization data. We discuss the influence of the nanoparticle shell parameters (morphology, thickness, ligands) on the overall magnetic performance of the systems. The prepared nanoparticles were tested for the isolation of viral RNA from tissue samples infected with hepatitis E virus-HEV and from biofluid samples of SARS-CoV-2 positive patients. The efficiency of RNA isolation was quantified by RT-qPCR method.

Integration of a Cas12a-mediated DNAzyme actuator with efficient RNA extraction for ultrasensitive colorimetric detection of viral RNA.

Developing highly sensitive and specific on-site tests is imperative to strengthen preparedness against future emerging infectious diseases. Here, we describe the construction of a Cas12a-mediated DNAzyme actuator capable of converting the recognition of a specific DNA sequence into an amplified colorimetric signal. To address viral RNA extraction challenges for on-site applications, we developed a rapid and efficient method capable of lysing the viral particles, preserving the released viral RNA, and concentrating the viral RNA. Integration of the DNAzyme actuator with the viral RNA extraction method and loop-mediated isothermal amplification enables a streamlined colorimetric assay for highly sensitive colorimetric detection of respiratory RNA viruses in gargle and saliva. This assay can detect as few as 83 viral particles/100 µL in gargle and 166 viral particles/100 µL in saliva. The entire assay, from sample processing to visual detection, was completed within 1 h at a single controlled temperature. We validated the assay by detecting SARS-CoV-2 in 207 gargle and saliva samples, achieving a clinical sensitivity of 96.3 % and specificity of 100%. The assay is adaptable for detecting specific nucleic acid sequences in other pathogens and is suitable for resource-limited settings.

Direct Detection of SARS-CoV-2 RNA in Saliva with Colorimetric RT-LAMP.

RT-LAMP is an effective alternative to RT-PCR-based diagnostics, offering high specificity, sensitivity, and rapid results. One notable advantage is the robustness of its enzymes, allowing for direct amplification from crude samples without the need for prior isolation of RNA. Colorimetric LAMP is particularly attractive as it eliminates the need for complex instrumentation, making it suitable for point-of-care applications. Here, we present a comprehensive step-by-step protocol for establishing an RT-LAMP-based test for direct detection of SARS-CoV-2 genomic RNA in saliva samples using different colorimetric detection methods. Importantly, this versatile test can be easily adapted to detect emerging pathogens.

A reverse transcription loop-mediated isothermal amplification assay for quick detection of tomato mosaic virus.

Tomato mosaic virus (ToMV), an economically important virus that affects a wide range of crops, is highly contagious, and its transmission is mediated by mechanical means, and through contaminated seeds or planting materials, making its management challenging. To contain its wide distribution, early and accurate detection of infection is required. A survey was conducted between January and May, 2023 in major tomato growing counties in Kenya, namely, Baringo, Kajiado, Kirinyaga and Laikipia, to establish ToMV disease incidence and to collect samples for optimization of the reverse transcription loop-mediated isothermal amplification assay (RT-LAMP) assay. A RT-LAMP assay, utilizing primers targeting the coat protein, was developed and evaluated for its performance. The method was able to detect ToMV in tomato samples within 4:45 minutes, had a 1,000-fold higher sensitivity than conventional reverse transcription polymerase chain reaction (RT-PCR) method and was specific to ToMV. Furthermore, the practical applicability of the assay was assessed using tomato samples and other solanaecous plants. The assay was able to detect the virus in 14 tomato leaf samples collected from the field, compared to 11 samples detected by RT-PCR, further supporting the greater sensitivity of the assay. To make the assay more amenable for on-site ToMV detection, a quick-extraction method based on alkaline polyethylene glycol buffer was evaluated, which permitted the direct detection of the target virus from crude leaf extracts. Due to its high sensitivity, specificity and rapidity, the RT-LAMP method could be valuable for field surveys and quarantine inspections towards a robust management of ToMV infections.

Evaluation of self-collected nasal, urine, and saliva samples for molecular detection of SARS-CoV-2 using an EUA approved RT-PCR assay and a laboratory developed LAMP SARS-CoV-2 test.

As the SARS-CoV-2 virus spread throughout the world, millions of positive cases of COVID-19 were registered and, even though there are millions of people already vaccinated against SARS-CoV-2, a large part of the global population remains vulnerable to contracting the virus. Massive nasopharyngeal sample collection in Puerto Rico at the beginning of the pandemic was limited by the scarcity of trained personnel and testing sites. To increase SARS-CoV-2 molecular testing availability, we evaluated the diagnostic accuracy of self-collected nasal, saliva, and urine samples using the TaqPath reverse transcription polymerase chain reaction (RT-PCR) COVID-19 kit to detect SARS-CoV-2. We also created a colorimetric loop-mediated isothermal amplification (LAMP) laboratory developed test (LDT) to detect SARS-CoV-2, as another strategy to increase the availability of molecular testing in community-based laboratories. Automated RNA extraction was performed in the KingFisher Flex instrument, followed by PCR quantification of SARS-CoV-2 on the 7500 Fast Dx RT-PCR using the TaqPath RT-PCR COVID-19 molecular test. Data was interpreted by the COVID-19 Interpretive Software from Applied Biosystems and statistically analyzed with Cohen's kappa coefficient (k). Cohen's kappa coefficient (k) for paired nasal and saliva samples showed moderate agreement (0.52). Saliva samples exhibited a higher viral load. We also observed 90% concordance between LifeGene-Biomarks' SARS-CoV-2 Rapid Colorimetric LAMP LDT and the TaqPath RT-PCR COVID-19 test. Our results suggest that self-collected saliva is superior to nasal and urine samples for COVID-19 testing. The results also suggest that the colorimetric LAMP LDT is a rapid alternative to RT-PCR tests for the detection of SARS-CoV-2. This test can be easily implemented in clinics, hospitals, the workplace, and at home; optimizing the surveillance and collection process, which helps mitigate global public health and socioeconomic upheaval caused by airborne pandemics.

Evaluation of Multiple RNA Extraction Protocols for Chikungunya Virus Screening in Aedes aegypti Mosquitoes.

Chikungunya virus (Togaviridae, Alphavirus; CHIKV) is a mosquito-borne global health threat. The main urban vector of CHIKV is the Aedes aegypti mosquito, which is found throughout Brazil. Therefore, it is important to carry out laboratory tests to assist in the virus's diagnosis and surveillance. Most molecular biology methodologies use nucleic acid extraction as the first step and require quality RNA for their execution. In this context, four RNA extraction protocols were evaluated in Ae. aegypti experimentally infected with CHIKV. Six pools were tested in triplicates (n = 18), each containing 1, 5, 10, 20, 30, or 40 mosquitoes per pool (72 tests). Four commercial kits were compared: QIAamp®, Maxwell®, PureLink®, and PureLink® with TRIzol®. The QIAamp® and PureLink® with TRIzol® kits had greater sensitivity. Two negative correlations were observed: as the number of mosquitoes per pool increases, the Ct value decreases, with a higher viral load. Significant differences were found when comparing the purity and concentration of RNA. The QIAamp® protocol performed better when it came to lower Ct values and higher RNA purity and concentration. These results may provide help in CHIKV entomovirological surveillance planning.

Monitoring SARS-CoV-2 RNA in wastewater from a shared septic system and sub-sewershed sites to expand COVID-19 disease surveillance.

Wastewater-based epidemiology has expanded as a tool for collecting COVID-19 surveillance data, but there is limited information on the feasibility of this form of surveillance within decentralized wastewater systems (e.g., septic systems). This study assessed SARS-CoV-2 RNA concentrations in wastewater samples from a septic system servicing a mobile home park (66 households) and from two pumping stations serving a similarly sized (71 households) and a larger (1,000 households) neighborhood within a nearby sewershed over 35 weeks in 2020. Also, raw wastewater from a hospital in the same sewershed was sampled. The mobile home park samples had the highest detection frequency (39/39 days) and mean concentration of SARS-CoV-2 RNA (2.7 × 107 gene copies/person/day for the N1) among the four sampling sites. N1 gene and N2 gene copies were highly correlated across mobile home park samples (Pearson's r = 0.93, p < 0.0001). In the larger neighborhood, new COVID-19 cases were reported every week during the sampling period; however, we detected SARS-CoV-2 RNA in 12% of the corresponding wastewater samples. The results of this study suggest that sampling from decentralized wastewater infrastructure can be used for continuous monitoring of SARS-CoV-2 infections.

Development of a multiplex real-time quantitative reverse-transcription polymerase chain reaction for the detection of four bee viruses.

Viruses in the families Dicistroviridae and Iflaviridae are among the main threats to western honey bees (Apis mellifera) and native bee species. Polymerase chain reaction (PCR) is the gold standard for pathogen detection in bees. However, high throughput screening for bee virus infections in singleplex PCR reactions is cumbersome and limited by the high quantities of sample RNA required. Thus, the development of a sensitive and specific multiplex PCR detection method for screening for multiple viruses simultaneously is necessary. Here, we report the development of a one-step multiplex reverse-transcription quantitative polymerase chain reaction (RT-qPCR) assay to detect four viruses commonly encountered in pollinator species. The optimized multiplex RT-qPCR protocol described in this study allows simultaneous detection of two dicistroviruses (Israeli acute paralysis virus and Black queen cell virus) and two iflaviruses (Sacbrood virus and Deformed wing virus) with high efficiency and specificity comparable to singleplex detection assays. This assay provides a broad range of detection and quantification, and the results of virus quantification in this study are similar to those performed in other studies using singleplex detection assays. This method will be particularly useful for data generation from small-bodied insect species that yield low amounts of RNA.

Evaluation of different molecular systems for detection and quantification of SARS-CoV-2 RNA from wastewater samples.

Wastewater-based epidemiology has proved to be a suitable approach for tracking the spread of epidemic agents including SARS-CoV-2 RNA. Different protocols have been developed for quantitative detection of SARS-CoV-2 RNA from wastewater samples, but little is known on their performance. In this study we compared three protocols based on Reverse Transcription Real Time-PCR (RT-PCR) and one based on Droplet Digital PCR (ddPCR) for SARS-CoV-2 RNA detection from 35 wastewater samples. Overall, SARS-CoV-2 RNA was detected by at least one method in 85.7 % of samples, while 51.4 %, 22.8 % and 8.6 % resulted positive with two, three or all four methods, respectively. Protocols based on commercial RT-PCR assays and on Droplet Digital PCR showed an overall higher sensitivity vs. an in-house assay. The use of more than one system, targeting different genes, could be helpful to increase detection sensitivity.

Analytical validation of a semi-automated methodology for quantitative measurement of SARS-CoV-2 RNA in wastewater collected in northern New England.

Wastewater-based epidemiology (WBE) can be used to monitor the community presence of infectious disease pathogens of public health concern such as the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Viral nucleic acid has been detected in the stool of SARS-CoV-2-infected individuals. Asymptomatic SARS-CoV-2 infections make community monitoring difficult without extensive and continuous population screening. In this study, we validated a procedure that includes manual pre-processing, automated SARS-CoV-2 RNA extraction and detection workflows using both reverse-transcriptase quantitative polymerase chain reaction (RT-qPCR) and reverse transcriptase droplet digital PCR (RT-ddPCR). Genomic RNA and calibration materials were used to create known concentrations of viral material to determine the linearity, accuracy, and precision of the wastewater extraction and SARS-CoV-2 RNA detection. Both RT-qPCR and RT-ddPCR perform similarly in all the validation experiments, with a limit of detection of 50 copies/mL. A wastewater sample from a care facility with a known outbreak was assessed for viral content in replicate, and we showed consistent results across both assays. Finally, in a 2-week survey of two New Hampshire cities, we assessed the suitability of our methods for daily surveillance. This paper describes the technical validation of a molecular assay that can be used for long-term monitoring of SARS-CoV-2 in wastewater as a potential tool for community surveillance to assist with public health efforts.IMPORTANCEThis paper describes the technical validation of a molecular assay that can be used for the long-term monitoring of SARS-CoV-2 in wastewater as a potential tool for community surveillance to assist with public health efforts.

Preamplification-free ultra-fast and ultra-sensitive point-of-care testing via LwaCas13a.

CRISPR based nucleic acid detection technology provides a deployable approach to point of care testing. While, there remain challenges limiting its practical applications, such as the need for pre-amplification and the long turnaround time. Here, we present a self-cascade signal amplification method with LwaCas13a and an artificially designed "U" rich RNA of stem-loop structure (URH) for pre-amplification-free ultra-fast and ultra-sensitive point-of-care testing (PASSPORT). The PASSPORT system contains: URH, crRNA targeted the URH, crRNA targeted the interesting RNA, fluorescent RNA reporter and LwaCas13a. The assay realized the detection of 100 copies/mL, within 5 min. The PASSPORT platform was further adopted for the detection of marker gene from SASR-CoV-2 and Severe fever with thrombocytopenia syndrome virus (SFTSV), respectively, and 100% accuracy for the analysis of clinical specimens (100 SASR-CoV-2 specimens and 16 SFTSV specimens) was obtained. Integrated with a lateral flow assay device, this assay could provide an alternative platform for the development of point of care testing (POCT) biosensors. PASSPORT has the potential to enable sensitive, specific, user-friendly, rapid, affordable, equipment-free and point-of-care testing for the purpose of large-scale screening and in case of epidemic outbreak.

Porous Agarose Layered Magnetic Graphene Oxide Nanocomposite for Virus RNA Monitoring in Wastewater.

The detection of virus RNA in wastewater has been established as a valuable method for monitoring Coronavirus disease 2019. Carbon nanomaterials hold potential application in separating virus RNA owing to their effective adsorption and extraction capabilities. However, carbon nanomaterials have limited separability under homogeneous aqueous conditions. Due to the stabilities in their nanostructure, it is a challenge to efficiently immobilize them onto magnetic beads for separation. Here, we develop a porous agarose layered magnetic graphene oxide (GO) nanocomposite that is prepared by agglutinating ferroferric oxide (Fe3O4) beads and GO with agarose into a cohesive whole. With an average porous size of approximately 500 nm, the porous structure enables the unhindered entry of virus RNA, facilitating its interaction with the surface of GO. Upon the application of a magnetic field, the nucleic acid can be separated from the solution within a few minutes, achieving adsorption efficiency and recovery rate exceeding 90% under optimized conditions. The adsorbed nucleic acid can then be preserved against complex sample matrix for 3 days, and quantitatively released for subsequent quantitative reverse transcription polymerase chain reaction (RT-qPCR) detection. The developed method was successfully utilized to analyze wastewater samples obtained from a wastewater treatment plant, detecting as few as 10 copies of RNA molecules per sample. The developed aMGO-RT-qPCR provides an efficient approach for monitoring viruses and will contribute to wastewater-based surveillance of community infections.

An Immiscible-Phase Filtration Device for Isolation, Amplification, and Detection of Nucleic Acids for Clinical Diagnostics.

Clinical diagnostics of infectious diseases via nucleic acid amplification tests (NAATs) depend on a separate step of isolation of nucleic acids from cells/viruses embedded in complex biological matrices. The most recent example has been reverse transcription polymerase chain reaction (RT-PCR) for amplification and detection of SARS-CoV-2 RNA for COVID-19 diagnostics. Kits for RNA extraction and purification are commercially available; however, their integration with amplification systems is generally lacking, resulting in two separate steps, i.e., sample preparation and amplification. This makes NAATs more time-consuming, requiring skilled personnel, and can increase the likelihood of contamination. Here, we describe a setup and methodology to perform the quick extraction and detection of nucleic acids in an integrated manner. In particular, we focus on the use of an immiscible filtration device for capture, isolation, concentration, amplification, and colorimetric detection of SARS-CoV-2 RNA.

Efficient wastewater sample filtration improves the detection of SARS-CoV-2 variants: An extensive analysis based on sequencing parameters.

During the SARS-CoV-2 pandemic, many countries established wastewater (WW) surveillance to objectively monitor the level of infection within the population. As new variants continue to emerge, it has become clear that WW surveillance is an essential tool for the early detection of variants. The EU Commission published a recommendation suggesting an approach to establish surveillance of SARS-CoV-2 and its variants in WW, besides specifying the methodology for WW concentration and RNA extraction. Therefore, different groups have approached the issue with different strategies, mainly focusing on WW concentration methods, but only a few groups highlighted the importance of prefiltering WW samples and/or purification of RNA samples. Aiming to obtain high-quality sequencing data allowing variants detection, we compared four experimental conditions generated from the treatment of: i) WW samples by WW filtration and ii) the extracted RNA by DNase treatment, purification and concentration of the extracted RNA. To evaluate the best condition, the results were assessed by focusing on several sequencing parameters, as the outcome of SARS-CoV-2 sequencing from WW is crucial for variant detection. Overall, the best sequencing result was obtained by filtering the WW sample. Moreover, the present study provides an overview of some sequencing parameters to consider when optimizing a method for monitoring SARS-CoV-2 variants from WW samples, which can also be applied to any sample preparation methodology.

Detection of thermotolerant coliforms and SARS-CoV-2 RNA in sewage and recreational waters in the Ecuadorian coast: A call for improving water quality regulation.

Wastewater surveillance represents an alternative approach to regulating contamination and the early detection of infectious agents and outbreaks of diseases of public health importance. This study evaluated domestic wastewater effects on recreational waters in estuarine and seawater bodies in Guayas and Santa Elena provinces in Ecuador, South America. Fecal indicator bacteria (thermotolerant coliforms) served as key indicators for evaluation. Physical, chemical, and microbiological quality markers following the Ecuadorian environmental quality standard and the discharge of effluents to the water resource were analyzed. Samples were collected from 44 coastal sites and 2 oxidation lagoons during the dry and rainy seasons of 2020 and 2021, respectively. SARS-CoV-2 RNA was detected in samples with higher E. coli concentrations using reverse transcription quantitative PCR to detect the genes N and ORF1ab. All samples analyzed for SARS-CoV-2 showed Ct ˂ 40 for at least one gene. Four samples showed at least 20 genome copies of gene N per reaction. These were at an artisanal fishing port, an estuarine area (Palmar), a recreational bay, and an oxidation lagoon. A moderate correlation was found between SARS-CoV-2 RNA, thermotolerant coliform and E. coli (p-value ≤ 0.0037), and a strong and positive correlation between thermotolerant coliform and E. coli. (p-value ≤ 0.00001), highlighting the utility of these established parameters as a proxy of the virus. Significant differences were found in the concentrations of thermotolerant coliforms between seasons (p-value = 0.016) and sites (p-value = 0.005). The highest levels of coliforms were found in the dry season (63000 MPN/100 mL) in Anconcito and during the rainy season (14000 MPN/100 mL) at Esterillo in Playas County. It is recommended that the decentralized autonomous governments of the surveyed provinces in Ecuador implement urgent corrective actions and establish medium-term mechanisms to minimize a potential contamination route. Additional parameters must be included in the monitoring, such as Enterococcus and intestinal parasites, due to their public health implications. In the oxidation lagoons, maintenance actions must be carried out, including the dissolution of sediments, an increase in water retention times, and in situ treatment of the sludge, to improve the system's performance.

Development of a novel Colorimetric Assay for the rapid diagnosis of Coronavirus disease 2019 from nasopharyngeal samples.

Emergence of Coronavirus disease 2019 (COVID-19) pandemic has posed a huge threat to public health. Rapid and reliable test to diagnose infected subjects is crucial for disease spread control. We developed a colorimetric test for COVID-19 detection using a Colorimetric Assay based on thiol-linked RNA modified gold nanoparticles (AuNPs) and oligonucleotide probes. This method was conducted on RNA from 200 pharyngeal swab samples initially tested by Real-Time polymerase chain reaction (RT-PCR) as gold standard. A specific oligonucleotide probe designed based on ORF1ab of COVID-19 was functionalized with AuNPs-probe conjugate. The exposure of AuNP-probe to isolated RNA samples was tested using hybridization. In this comparative study, the colorimetric functionalized AuNPs assay exhibited a detection limit of 25 copies/µL. It was higher in comparison to the RT-PCR method, which could only detect 15 copies/µL. The results demonstrated 100% specificity and 96% sensitivity for the developed method. Herein, we developed an incredibly rapid, simple and cost-effective Colorimetric Assay lasting approximately 30 min which could process considerably higher number of COVID-19 samples compared to the RT-PCR. This AuNP-probe conjugate colorimetric method could be considered the optimum alternatives for conventional diagnostic tools especially in over-populated and/or low-income countries.

Multiple on-line active valves based centrifugal microfluidics for dynamic solid-phase enrichment and purification of viral nucleic acid.

Point of care testing (POCT) of nucleic acids holds significant importance in the realm of infectious disease prevention and control, as well as the advancement of personalized precision medicine. Nevertheless, conventional nucleic acid testing methods continue to face challenges such as prolonged detection times and dependence on extensive specialized equipment and personnel, rendering them unsuitable for point of care applications. Here, we proposed an innovative active centrifugal microfluidic system (ACMS) for automatic nucleic acid extraction, encompassing modules for active valve control and magnetic control. An on-chip centrifugal puncture valve (PV) was devised based on the elastic tolerance differences between silicone membranes and tinfoils to release pre-embedded liquid reagents on demand. Furthermore, we have utilized the returnable valve (RV) technology to accurately control the retention and release of liquids, leveraging the high elastic tolerance of the silicone membrane. By incorporating an online controllable magnetic valve, we have achieved controlled and rapid aggregation and dispersion of magnetic beads. The final chip encapsulates multiple reagents and magnetic beads necessary for nucleic acid extraction. Upon sample addition and loading into the instrument, automated on-chip sample loading and nucleic acid extraction, purification, and collection can be accomplished within 30 minutes, halving the overall operation time and even increasing the efficiency of pseudovirus extraction by three orders of magnitude. Consequently, real-time fluorescence quantitative PCR amplification has successfully detected multiple targets of the SARS-CoV-2 virus (with an impressive detection limit as low as 10 copies per µL), along with targeted sequencing analysis yielding a conformity rate of 99%.

Real-time reverse transcription recombinase polymerase amplification (RT-RPA) assay for detection of cassava brown streak viruses.

Cassava brown streak disease (CBSD) caused by Cassava brown streak virus (CBSV) and Ugandan cassava brown streak virus (UCBSV) is the most economically important viral disease of cassava. As cassava is a vegetatively propagated crop, the development of rapid and sensitive diagnostics would aid in the identification of virus-free planting material and development of effective management strategies. In this study, a rapid, specific and sensitive real-time reverse transcription recombinase polymerase amplification (RT-RPA) assay was developed for real-time detection of CBSV and UCBSV. The RT-RPA was able to detect as little as 2 pg/µl of purified RNA obtained from infected cassava leaves, a sensitivity equivalent to that obtained by quantitative real-time reverse transcription PCR (qRT-PCR), within 20 min at 37 °C. Further, the RT-RPA detected each target virus directly from crude leaf and stem extracts, avoiding the tedious and costly isolation of high-quality RNA. The developed RT-RPA assay provides a valuable diagnostic tool that can be adopted by cassava seed certification and virus resistance breeding programs to ensure distribution of virus-free cassava planting materials to farmers. This is the first report on the development and validation of crude sap-based RT-RPA assay for the detection of cassava brown streak viruses (UCBSV and CBSV) infection in cassava plants.

Diagnostic performance, stability, and acceptability of self-collected saliva without additives for SARS-CoV-2 molecular diagnosis.

BACKGROUND: Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) caused the coronavirus disease 2019 (COVID-19), leading to a global pandemic. The molecular diagnosis of this virus is mostly performed by collecting upper respiratory samples, which has many disadvantages, including patient discomfort and the need for trained healthcare professionals. Although saliva has emerged as a more comfortable sample, the use of additives to preserve viral RNA is expensive and, in some cases, difficult for self-collection. METHOD: This study evaluated the diagnostic performance by RT-PCR and stability of self-collected saliva using wide-mouth specimen collection cups without stabilization and/or inactivation buffers for SARS-CoV-2 detection, compared to nasopharyngeal samples and saliva collected with additives. Additionally, the study assessed the acceptability of this sample collection method among participants and healthcare personnel. RESULTS: The study included 1281 volunteers with a 24.6% positive infection rate. Saliva demonstrated comparable diagnostic performance to nasopharyngeal samples, with a sensitivity of 87.6% and specificity of 99.6%, for a total percent agreement of 96.4%. The study also showed that viral RNA in saliva remained stable for at least 72 h at different temperatures. Notably, saliva samples without additives exhibited a lower RdRp Ct compared to samples with additives, suggesting that the absence of stabilization and/or inactivation buffers does not significantly affect its performance. The study highlighted the acceptability of saliva among patients and healthcare personnel due to its noninvasive nature and ease of collection. CONCLUSIONS: This research supports the implementation of self-collected saliva as a comfortable and user-friendly alternative sample for SARS-CoV-2 diagnosis.