The role of sulfur cycle in new particle formation: Cycloaddition reaction of SO3 to H2S.

The chemistry of sulfur cycle contributes significantly to the atmospheric nucleation process, which is the first step of new particle formation (NPF). In the present study, cycloaddition reaction mechanism of sulfur trioxide (SO3) to hydrogen sulfide (H2S) which is a typical air pollutant and toxic gas detrimental to the environment were comprehensively investigate through theoretical calculations and Atmospheric Cluster Dynamic Code simulations. Gas-phase stability and nucleation potential of the product thiosulfuric acid (H2S2O3, TSA) were further analyzed to evaluate its atmospheric impact. Without any catalysts, the H2S + SO3 reaction is infeasible with a barrier of 24.2 kcal/mol. Atmospheric nucleation precursors formic acid (FA), sulfuric acid (SA), and water (H2O) could effectively lower the reaction barriers as catalysts, even to a barrierless reaction with the efficiency of cis-SA > trans-FA > trans-SA > H2O. Subsequently, the gas-phase stability of TSA was investigated. A hydrolysis reaction barrier of up to 61.4 kcal/mol alone with an endothermic isomerization reaction barrier of 5.1 kcal/mol under the catalytic effect of SA demonstrates the sufficient stability of TSA. Furthermore, topological and kinetic analysis were conducted to determine the nucleation potential of TSA. Atmospheric clusters formed by TSA and atmospheric nucleation precursors (SA, ammonia NH3, and dimethylamine DMA) were thermodynamically stable. Moreover, the gradually decreasing evaporation coefficients for TSA-base clusters, particularly for TSA-DMA, suggests that TSA may participate in NPF where the concentration of base molecules are relatively higher. The present new reaction mechanism may contributes to a better understanding of atmospheric sulfur cycle and NPF.

Divergent syntheses of complex Veratrum alkaloids.

The Veratrum alkaloids are a class of highly intricate natural products renowned for their complex structural and stereochemical characteristics, which underlie a diverse array of pharmacological activities ranging from anti-hypertensive properties to antimicrobial effects. These properties have generated substantial interest among both synthetic chemists and biologists. While numerous advancements have been made in the synthesis of jervanine and veratramine subtypes over the past 50 years, the total synthesis of highly oxidized cevanine subtypes has remained relatively scarce. Building on the efficiency of our previously developed strategy for constructing the hexacyclic carbon skeleton of the Veratrum alkaloid family via a stereoselective intramolecular Diels-Alder reaction and radical cyclization, here we show the development of a unified synthetic approach to access highly oxidized Veratrum alkaloids. This includes the total synthesis of (-)-zygadenine, (-)-germine, (-)-protoverine and the alkamine of veramadine A, by capitalizing on a meticulously designed sequence of redox manipulations and a late-stage neighboring-group participation strategy.

Conjugation of CRAMP18-35 Peptide to Chitosan and Hydroxypropyl Chitosan via Copper-Catalyzed Azide-Alkyne Cycloaddition and Investigation of Antibacterial Activity.

We developed a synthesis strategy involving a diazo transfer reaction and subsequent click reaction to conjugate a murine cathelicidin-related antimicrobial peptide (CRAMP18-35) to chitosan and hydroxypropyl chitosan (HPC), confirmed the structure, and investigated the antimicrobial activity. Chitosan azide and HPC-azide were prepared with a low degree of azidation by reacting the parent chitosan and HPC with imidazole sulfonyl azide hydrochloride. CRAMP18-35 carrying an N-terminal pentynoyl group was successfully grafted onto chitosan and HPC via copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction. The chitosan-peptide conjugates were characterized by IR spectroscopy and proton NMR to confirm the conversion of the azide to 1,2,3-triazole and to determine the degree of substitution (DS). The DS of the chitosan and HPC CRAMP18-35 conjugates was 0.20 and 0.13, respectively. The antibacterial activity of chitosan-peptide conjugates was evaluated for activity against two species of Gram-positive bacteria, Staphylococcus aureus (S. aureus) and Enterococcus faecalis (E. faecalis), and two species of Gram-negative bacteria, Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa). The antimicrobial peptide conjugates were selectively active against the Gram-negative bacteria and lacking activity against Gram-positive bacteria.

Converting the Amyloidogenic Islet Amyloid Polypeptide into a Potent Nonaggregating Peptide Ligand by Side Chain-to-Side Chain Macrocyclization.

The islet amyloid polypeptide (IAPP), also known as amylin, is a hormone playing key physiological roles. However, its aggregation and deposition in the pancreatic islets are associated with type 2 diabetes. While this peptide adopts mainly a random coil structure in solution, its secondary conformational conversion into α-helix represents a critical step for receptor activation and contributes to amyloid formation and associated cytotoxicity. Considering the large conformational landscape and high amyloidogenicity of the peptide, as well as the complexity of the self-assembly process, it is challenging to delineate the delicate interplay between helical folding, peptide aggregation, and receptor activation. In the present study, we probed the roles of helical folding on the function-toxicity duality of IAPP by restricting its conformational ensemble through side chain-to-side chain stapling via azide-alkyne cycloaddition. Intramolecular macrocyclization (i; i + 4) constrained IAPP into α-helix and inhibited its aggregation into amyloid fibrils. These helical derivatives slowed down the self-assembly of unmodified IAPP. Site-specific macrocyclization modulated the capacity of IAPP to perturb lipid bilayers and cell plasma membrane and reduced, or even fully inhibited, the cytotoxicity associated with aggregation. Furthermore, the α-helical IAPP analogs showed moderate to high potency toward cognate G protein-coupled receptors. Overall, these results indicate that macrocyclization represents a promising strategy to protect an amyloidogenic peptide hormone from aggregation and associated toxicity, while maintaining high receptor activity.

Biomimetic and Concise Total Syntheses of Prenylated and Bicyclo[2.2.2]diazaoctane-Containing Indole Alkaloids Including Taichunamide A, Notoamide N and Versicolamide B.

Total syntheses of the title prenylated indole alkaloids together with seven others are reported. Biogenetic considerations have been employed in devising the reaction sequences leading to these targets with, in the opening stages, electrochemically-derived indole-3-carboxaldehyde 15 being subject to an aldol-type condensation reaction involving diketopiperazine derivative 19. This led, after prototopic shifts, intramolecular Diels-Alder cycloaddition and hydrolysis/deprotection steps, to the racemic forms of the bicyclo[2.2.2]diazaoctane-containing natural product stephacidin A (2) and its C6 epimer 3. Epoxidation of the last compound afforded, following rearrangement of the primary oxidation products, a mixture of (±)-taichunamide A [(±)-4] and (±)-versicolamide B [(±)-7]. Related protocols allowed for the conversion of (±)-stephacidin A [(±)-2] into (±)-notoamide B [(±)-5]. Analogous aldol condensation, nucleophilic reduction, and epoxidation steps led to the formation of (-)-notoamide E and its conversion into notoamide C as well as the indole fragmentation product amoenamide E. A late-stage chlorination reaction applied to (±)-stephacidin A provided access to the spirocyclic oxindole (±)-notoamide N [(±)-6].

Enzyme-free fluorescent DNA detection based on nucleic acid-templated click reaction via controllable synthesis of Cu2O as heterogeneous nanocatalyst.

In the field of nucleic acid amplification assays, developing enzyme-free, easy-to-use, and highly sensitive amplification approaches remains a challenge. In this work, we synthesized a heterogeneous Cu2O nanocatalyst (hnCu2O) with different particle sizes and shapes, which was used for developing enzyme- and label-free nucleic acid amplification methods based on the nucleic acid-templated azide-alkyne cycloaddition (AAC) reaction catalyzed by hnCu2O. The hnCu2O exhibited size- and shape-dependent catalytic activity, with smaller sizes and spherical-like shapes exhibiting superior activity. Spherical-like hnCu2O (61 ± 8 nm) not only achieved a ligation yield of up to 84.2 ± 3.9 % in 3 min but also exhibited faster kinetics in the nucleic acid-templated hnCu2O-catalyzed AAC reaction, with a high reaction rate of 0.65 min-1 and a half-life of 1.07 ± 0.09 min. Based on this result, we developed nucleic acid-templated click ligation linear amplification reaction (NA-CLLAR) and nucleic acid-templated click ligation exponential amplification reaction (NA-CLEAR) approach. By combining the recognition (complementary to the target sequence) and signal output (split G-quadruplex sequence) elements into a DNA probe, the NA-CLLAR and NA-CLEAR fluorescence assays achieved highly specific detection of target nucleic acids, with a detection limit of 2.8 aM based on G-quadruplex-enhanced fluorescence. This work is a valuable reference and will inspire researchers to design enzyme-free nucleic acid signal amplification strategies by developing different types of Cu(I) catalysts with improved catalytic activity.

Hoechst modification by strain-promoted azide-alkyne cycloaddition for transport of functional molecules into the cell nucleus.

The delivery of functional molecules to the cell nucleus enables the visualization of nuclear function and the development of effective medical treatments. In this study, we successfully modified the Hoechst molecule, which is a well-documented nuclear-staining agent, using the strain-promoted azide-alkyne cycloaddition (SPAAC) reaction. We prepared Hoechst derivatives bearing an azide group (Hoe-N3) and characterized their SPAAC reactions in the presence of corresponding molecules with a dibenzylcyclooctyne unit (DBCO). The SPAAC reaction of Hoe-N3 with alkylamine bearing DBCO, fluorescent TAMRA, or Cy5 molecules bearing DBCO led to the formation of the coupling products Hoe-Amine, Hoe-TAMRA, and Hoe-Cy5, respectively. These Hoechst derivatives retained their DNA-binding properties. In addition, Hoe-TAMRA and Hoe-Cy5 exhibited properties of dual accumulation in the cell nucleus and mitochondria. Initial incubation of these molecules in living cells resulted in its accumulation in mitochondria, while after mitochondrial depolarization, it was smoothly released from mitochondria and translocated into the cell nucleus. Thus, mitochondrial depolarization could be monitored by measuring the emission of Hoe-TAMRA and Hoe-Cy5 at the cell nucleus.

Recent advances in triazole synthesis via click chemistry and their pharmacological applications: A review.

Click chemistry is a flexible method featuring only the most feasible and efficient chemical reactions. The synthesis of 1,2,3-triazole from azides and terminal acetylenes using copper(I) as a catalyst is an extremely powerful reaction due to the extreme dependability, good selectivity, and biocompatibility of the starting materials. Triazole molecules are more than simple passive linkers; through hydrogen bonding and dipole interactions, they rapidly bind with biological targets. Its applications in drug development are expanding, ranging from target-oriented in situ chemistry and combinatorial mechanisms for lead generation to bioconjugation methods to study proteins and DNA. The click chemistry has frequently been used to speed up drug discovery and optimization processes in the past few years. The click chemistry reaction based on copper-catalyzed azide-alkyne cycloaddition (CuAAC) is a biochemical process with applications in medicinal chemistry and chemical biology. Thus, click reactions are an essential component of the toolkit for medicinal chemistry and help medicinal chemists overcome the barriers in chemical reactions, increase throughput, and improve the standards of compound libraries. The review highlights the recent advancements in the copper-catalyzed azide-alkyne cycloaddition (CuAAC) click chemistry approach for synthesizing biologically important triazole moieties with a greater emphasis on synthesis methodologies and pharmacological applications. Additionally, the triazole-based FDA-approved drugs are also discussed with their mode of action to highlight the importance of the click chemistry approach in synthesizing the bioactive triazole compounds.

Base-Mediated Chemodivergent [4 + 1] and [2 + 1] Cycloadditions of N-Alkylpyridiniums and Enones.

Divergent synthesis of structurally different products from the same kinds of starting materials is highly synthetically useful but very challenging. Herein, we reported a base-mediated chemodivergent [4 + 1] and [2 + 1] cycloaddition of N-alkylpyridinium and enone under mild conditions, leading to furan-fused bicycles with high diastereoselectivity and spirobicycles, respectively, from moderate to high yields. N-Alkylpyridinium salts were modular nucleophilic transfer reagents and C1 synthons, which underwent tandem Michael addition to the α,ß-unsaturated ketones and cyclization under the base conditions. Late-stage derivatization of 4-propyldicyclohexylanone from an important industrial raw of liquid crystal display (LCD) screens was realized. In vitro, compound 3f exhibited good activities against human colon cancer cells (HCT116) with IC50 values in 9.82 ± 0.27 µM. Further biological evaluations investigated the mechanism of the effective inhibition of cell growth, including apoptosis ratio detection, cell cycle analysis, and migration capacity of HCT116 cells. In apoptosis effect studies, complex 3f increased the percentage of apoptotic HCT116 cells to 26.8% (15 µM).

Systematic Route to Construct the 5-5-6 Tricyclic Core of Furanobutenolide-Derived Cembranoids and Norcembranoids.

Herein, we present a highly efficient method for constructing the intricate 5-5-6 fused ring system commonly found in the polycyclic furanobutenolide-derived cembranoid and norcembranoid natural product family with remarkable diastereoselectivity, utilizing an intramolecular Diels-Alder reaction as the cornerstone. Notably, employing a propargyl ether tether as the dienophile yields significant enhancements in the transformation process compared to its propargyl ester counterpart, as demonstrated in our previous total synthesis of havellockate. This advancement holds promising implications for future investigations, offering a streamlined pathway for rapidly assembling the tricyclic core characteristic of this diverse family of natural products.

Asymmetric Synthesis and Biological Evaluation of Platensilin, Platensimycin, Platencin, and Their Analogs via a Bioinspired Skeletal Reconstruction Approach.

Platensilin, platensimycin, and platencin are potent inhibitors of ß-ketoacyl-acyl carrier protein synthase (FabF) in the bacterial and mammalian fatty acid synthesis system, presenting promising drug leads for both antibacterial and antidiabetic therapies. Herein, a bioinspired skeleton reconstruction approach is reported, which enables the unified synthesis of these three natural FabF inhibitors and their skeletally diverse analogs, all stemming from a common ent-pimarane core. The synthesis features a diastereoselective biocatalytic reduction and an intermolecular Diels-Alder reaction to prepare the common ent-pimarane core. From this intermediate, stereoselective Mn-catalyzed hydrogen atom-transfer hydrogenation and subsequent Cu-catalyzed carbenoid C-H insertion afford platensilin. Furthermore, the intramolecular Diels-Alder reaction succeeded by regioselective ring opening of the newly formed cyclopropane enables the construction of the bicyclo[3.2.1]-octane and bicyclo[2.2.2]-octane ring systems of platensimycin and platencin, respectively. This skeletal reconstruction approach of the ent-pimarane core facilitates the preparation of analogs bearing different polycyclic scaffolds. Among these analogs, the previously unexplored cyclopropyl analog 47 exhibits improved antibacterial activity (MIC80 = 0.0625 µg/mL) against S. aureus compared to platensimycin.

Chemogenetic Evolution of Diversified Photoenzymes for Enantioselective [2 + 2] Cycloadditions in Whole Cells.

Artificial photoenzymes with novel catalytic modes not found in nature are in high demand; yet, they also present significant challenges in the field of biocatalysis. In this study, a chemogenetic modification strategy is developed to facilitate the rapid diversification of photoenzymes. This strategy integrates site-specific chemical conjugation of various artificial photosensitizers into natural protein cavities and the iterative mutagenesis in cell lysates. Through rounds of directed evolution, prominent visible-light-activatable photoenzyme variants were developed, featuring a thioxanthone chromophore. They successfully enabled the enantioselective [2 + 2] photocycloaddition of 2-carboxamide indoles, a class of UV-sensitive substrates that are traditionally challenging for known photoenzymes. Furthermore, the versatility of this photoenzyme is demonstrated in enantioselective whole-cell photobiocatalysis, enabling the efficient synthesis of enantioenriched cyclobutane-fused indoline tetracycles. These findings significantly expand the photophysical properties of artificial photoenzymes, a critical factor in enhancing their potential for harnessing excited-state reactivity in stereoselective transformations.

Hetero-Diels-Alder and CuAAC Click Reactions for Fluorine-18 Labeling of Peptides: Automation and Comparative Study of the Two Methods.

Radiolabeled peptides are valuable tools for diagnosis or therapies; they are often radiofluorinated using an indirect approach based on an F-18 prosthetic group. Herein, we are reporting our results on the F-18 radiolabeling of three peptides using two different methods based on click reactions. The first one used the well-known CuAAC reaction, and the second one is based on our recently reported hetero-Diels-Alder (HDA) using a dithioesters (thia-Diels-Alder) reaction. Both methods have been automated, and the 18F-peptides were obtained in similar yields and synthesis time (37-39% decay corrected yields by both methods in 120-140 min). However, to obtain similar yields, the CuAAC needs a large amount of copper along with many additives, while the HDA is a catalyst and metal-free reaction necessitating only an appropriate ratio of water/ethanol. The HDA can therefore be considered as a minimalist method offering easy access to fluorine-18 labeled peptides and making it a valuable additional tool for the indirect and site-specific labeling of peptides or biomolecules.

Exploration and Development of Nitrone Chemistry.

Nitrones are widely used as 1,3-dipoles in organic synthesis, but control of their reactions is not always easy. This review outlines our efforts to make the reactions of nitrones more predictable and easier to use. These efforts can be categorized into (1) 1,3-nucleophilic addition reaction of ketene silyl acetals to nitrones, (2) geometry-controlled cycloaddition of C-alkoxycarbonyl nitrones, (3) stereo-controlled cycloaddition using double asymmetric induction, and (4) generation of nitrones by N-selective modification of oximes.

Diastereoselective 1,3-dipolar intramolecular nitrone olefin cycloaddition (INOC) reaction of a sugar-derived allyl alcohol: Synthesis of functionalized aminocyclopentitols.

The DIBAL-H reduction of the Baylis-Hillman sugar adduct, obtained from 3-O-benzyl-1,2-isopropylidene-α-D-xylo-pentodialdo-1,4-furanose yielded trisubstituted alkenes by eliminating the ß-hydroxyl group. Subsequently, the hydrolysis of the isopropylidene acetal to the corresponding hemiacetal was reacted with N-benzyl hydroxylamine hydrochloride to generate the nitrone, which underwent diastereoselective intramolecular 1,3-dipolar nitrone olefin cycloaddition (INOC) to give an isoxazolidine skeleton. The concomitant reductive cleavage of the N-O bond and benzyl group of the fused isoxazolidines afforded new functionalized aminocyclopentitols in good yields.

Synthesis and In Silico Analysis of New Polyheterocyclic Molecules Derived from [1,4]-Benzoxazin-3-one and Their Inhibitory Effect against Pancreatic α-Amylase and Intestinal α-Glucosidase.

This study focuses on synthesizing a new series of isoxazolinyl-1,2,3-triazolyl-[1,4]-benzoxazin-3-one derivatives 5a-5o. The synthesis method involves a double 1,3-dipolar cycloaddition reaction following a "click chemistry" approach, starting from the respective [1,4]-benzoxazin-3-ones. Additionally, the study aims to evaluate the antidiabetic potential of these newly synthesized compounds through in silico methods. This synthesis approach allows for the combination of three heterocyclic components: [1,4]-benzoxazin-3-one, 1,2,3-triazole, and isoxazoline, known for their diverse biological activities. The synthesis procedure involved a two-step process. Firstly, a 1,3-dipolar cycloaddition reaction was performed involving the propargylic moiety linked to the [1,4]-benzoxazin-3-one and the allylic azide. Secondly, a second cycloaddition reaction was conducted using the product from the first step, containing the allylic part and an oxime. The synthesized compounds were thoroughly characterized using spectroscopic methods, including 1H NMR, 13C NMR, DEPT-135, and IR. This molecular docking method revealed a promising antidiabetic potential of the synthesized compounds, particularly against two key diabetes-related enzymes: pancreatic α-amylase, with the two synthetic molecules 5a and 5o showing the highest affinity values of 9.2 and 9.1 kcal/mol, respectively, and intestinal α-glucosidase, with the two synthetic molecules 5n and 5e showing the highest affinity values of -9.9 and -9.6 kcal/mol, respectively. Indeed, the synthesized compounds have shown significant potential as antidiabetic agents, as indicated by molecular docking studies against the enzymes α-amylase and α-glucosidase. Additionally, ADME analyses have revealed that all the synthetic compounds examined in our study demonstrate high intestinal absorption, meet Lipinski's criteria, and fall within the required range for oral bioavailability, indicating their potential suitability for oral drug development.

Hunting for the Intermolecular Diels-Alderase.

ConspectusThe Diels-Alder reaction is well known as a concerted [4 + 2] cycloaddition governed by the Woodward-Hoffmann rules. Since Prof. Otto Diels and his student Kurt Alder initially reported the intermolecular [4 + 2] cycloaddition between cyclopentadiene and quinone in 1928, it has been recognized as one of the most powerful chemical transformations to build C-C bonds and construct cyclic structures. This named reaction has been widely used in synthesizing natural products and drug molecules. Driven by the synthetic importance of the Diels-Alder reaction, identifying the enzyme that stereoselectively catalyzes the Diels-Alder reaction has become an intriguing research area in natural product biosynthesis and biocatalysis. With significant progress in sequencing and bioinformatics, dozens of Diels-Alderases have been characterized in microbial natural product biosynthesis. However, few are evolutionally dedicated to catalyzing an intermolecular Diels-Alder reaction with a concerted mechanism.This Account summarizes our endeavors to hunt for the naturally occurring intermolecular Diels-Alderase from plants. Our research journey started from the biomimetic syntheses of D-A-type terpenoids and flavonoids, showing that plants use both nonenzymatic and enzymatic intermolecular [4 + 2] cycloadditions to create complex molecules. Inspired by the biomimetic syntheses, we identify an intermolecular Diels-Alderase hidden in the biosynthetic pathway of mulberry Diels-Alder-type cycloadducts using a biosynthetic intermediate probe-based target identification strategy. This enzyme, MaDA, is an endo-selective Diels-Alderase and is then functionally characterized as a standalone intermolecular Diels-Alderase with a concerted but asynchronous mechanism. We also discover the exo-selective intermolecular Diels-Alderases in Morus plants. Both the endo- and exo-selective Diels-Alderases feature a broad substrate scope, but their mechanisms for controlling the endo/exo pathway are different. These unique intermolecular Diels-Alderases phylogenetically form a subgroup of FAD-dependent enzymes that can be found only in moraceous plants, explaining why this type of [4 + 2] cycloadduct is unique to moraceous plants. Further studies of the evolutionary mechanism reveal that an FAD-dependent oxidocyclase could acquire the Diels-Alderase activity via four critical amino acid mutations and then gradually lose its original oxidative activity to become a standalone Diels-Alderase during the natural evolution. Based on these insights, we designed new Diels-Alderases and achieved the diversity-oriented chemoenzymatic synthesis of D-A products using either naturally occurring or engineered Diels-Alderases.Overall, this Account describes our decade-long efforts to discover the intermolecular Diels-Alderases in Morus plants, particularly highlighting the importance of biomimetic synthesis and chemical proteomics in discovering new intermolecular Diels-Alderases from plants. Meanwhile, this Account also covers the evolutionary and catalytic mechanism study of intermolecular Diels-Alderases that may provide new insights into how to discover and design new Diels-Alderases as powerful biocatalysts for organic synthesis.

An LF-NMR homogeneous sensor for highly sensitive and precise detection of E. coli based on target-triggered CuAAC click reaction.

In this study, a low field nuclear magnetic resonance (LF-NMR) homogeneous sensor was constructed for detection of Escherichia coli (E. coli) based on the copper metabolism of E. coli triggered click reaction. When live E. coli was present, a large amount of Cu2+ ions were transformed into Cu+ via copper metabolism, which then catalyzed a Cu+-catalyzed azide-alkyne cycloaddition (CuAAC) reaction between two materials, azide group modified gadolinium oxide nanorods (Gd2O3-Az) and PA-GO@Fe3O4 i.e., graphene oxide (GO) loaded with large amounts of alkynyl (PA) groups and Fe3O4 nanoparticles simultaneously. After magnetic separation, unbound Gd2O3-Az was dissolved by added hydrochloric acid (HCl) to generate homogeneous Gd3+ solution, enabling homogeneous detection of E. coli. Triple signal amplification was achieved through the CuAAC reaction induced by E. coli copper metabolism, functional nanomaterials, and HCl assisted homogeneous detection. Under the optimal experimental conditions, the linear range and limit of detection (LOD) for E. coli were 10-1.0 × 107 CFU/mL and 3.5 CFU/mL, respectively, and the relative standard deviations (RSDs) were all less than 2.8 %. In addition, the sensor has satisfactory selectivity, stability and practical sample application capability, providing a new approach for the LF-NMR detection of food-borne pathogenic bacteria.

Highly Functionalized Spirobisnaphthalenes from Roussoella sp. KT4147.

Highly functionalized spirobisnaphthalenes, preussomerins N (1) and O (2), and simpler compounds, such as 2,3-α-epoxypalmarumycin CP18 (3), 3α-hydroxy-CJ-12,372 (4), and 16 known structurally related congeners, were isolated from a culture broth of Roussoella sp. KT4147. Structural analysis revealed that 1 was a dimer of preussomerin G (6), connected by a nitrogen atom, and 2 was a derivative of 6 with a macommelin substructure. Preussomerin N (1) was considered to be biosynthetically derived via the Michael-type 1,4-addition of ammonia to 6, followed by another Michael addition to another molecule of 6. Contrarily, 2 was suggested to be derived through an endo-Diels-Alder cycloaddition between a diene derived from the (E)-enol form of macommelinal via an ene-reaction and dienophile 6. Compounds 1 and 2 exhibited potent cytotoxicity against COLO-201 human colorectal cancer cells.

7-Deazapurine and Pyrimidine Nucleoside and Oligonucleotide Cycloadducts Formed by Inverse Diels-Alder Reactions with 3,6-Di(pyrid-2-yl)-1,2,4,5-tetrazine: Ethynylated and Vinylated Nucleobases for Functionalization and Impact of Pyridazine Adducts on DNA Base Pair Stability and Mismatch Discrimination.

The manuscript reports on 7-deazapurine and pyrimidine nucleoside and oligonucleotide cycloadducts formed by the inverse electron demand Diels-Alder (iEDDA) reaction with 3,6-di(pyrid-2-yl)-1,2,4,5-tetrazine. Cycloadducts were constructed from ethynylated and vinylated nucleobases. Oligonucleotides were synthesized containing iEDDA modifications, and the impact on duplex stability was investigated. iEDDA reactions were performed on nucleoside triple bond side chains. Oxidation was not required in these cases as dihydropyridazine intermediates are not formed. In contrast, oxidation is necessary for reactions performed on alkenyl compounds. This was verified on 5-vinyl-2'-deoxyuridine. A diastereomeric mixture of 1,2-dihydropyridazine cycloadduct intermediates was isolated, characterized, and later oxidized. 12-mer oligonucleotides containing 1,2-pyridazine inverse Diels-Alder cycloadducts and their precursors were hybridized to short DNA duplexes. For that, a series of phosphoramidites was prepared. DNA duplexes with 7-functionalized 7-deazaadenines and 5-functionalized pyrimidines display high duplex stability when spacer units are present between nucleobases and pyridazine cycloadducts. A direct connectivity of the pyridazine moiety to nucleobases as reported for metabolic labeling of vinyl nucleosides reduced duplex stability strongly. Oligonucleotides bearing linkers with and without pyridazine cycloadducts attached to the 7-deazaadenine nucleobase significantly reduced mismatch formation with dC and dG.