Pharmacokinetic Analysis of Gatifloxacin and Dexamethasone in Rabbit Ocular Biofluid Using a Sensitive and Selective LC-MS/MS Method.

Bacterial keratitis (BK) is an infection that causes inflammation of the cornea and, if severe, can result in blindness. Topical fluoroquinolones combined with corticosteroids have been shown to be useful in the treatment of BK. A rapid, selective, and sensitive bioanalytical method for simultaneous quantification of Gatifloxacin (GAT) and Dexamethasone (DEX) has been developed and validated using tandem mass spectrometry (LC-MS/MS). Optimal separation was accomplished in under 5 min using an Agilent Zorbax C18 column (100 mm × 4.6 mm, 3.5 µm). The mobile phase was composed of a blend of 0.2% formic acid in triple distilled water and methanol with a flow rate of 0.65 mL/min in isocratic mode. GAT and DEX were detected in positive electrospray ionization multiple reaction monitoring mode (MRM), and the retention time was found to be at 1.64 and 2.93 min, respectively. The linearity of GAT and DEX was found to be in the range of 1.56-400 ng mL-1 with good precision and accuracy. The method was validated according to USFDA regulatory guidelines. The validated method was effectively utilized for preclinical pharmacokinetic analysis of GAT and DEX in rabbit tear fluid following the topical application of a commercial formulation.

Mathematical Models of Ocular Drug Delivery.

Drug delivery is an important factor for the success of ocular drug treatment. However, several physical, biochemical, and flow-related barriers limit drug exposure of anterior and posterior ocular target tissues during drug treatment via topical, subconjunctival, intravitreal, or systemic routes. Mathematical models encompass various barriers so that their joint influence on pharmacokinetics (PKs) can be simulated in an integrated fashion. The models are useful in predicting PKs and even pharmacodynamics (PDs) of administered drugs thereby fostering development of new drug molecules and drug delivery systems. Furthermore, the models are potentially useful in interspecies translation and probing of disease effects on PKs. In this review article, we introduce current modeling methods (noncompartmental analyses, compartmental and physiologically based PK models, and finite element models) in ocular PKs and related drug delivery. The roles of top-down models and bottom-up simulations are discussed. Furthermore, we present some future challenges, such as modeling of intra-tissue distribution, prediction of drug responses, quantitative systems pharmacology, and possibilities of artificial intelligence.

Polystyrene Sulfonate Resin as an Ophthalmic Carrier for Enhanced Bioavailability of Ligustrazine Phosphate Controlled Release System.

Topical ocular sustained-release drug delivery systems represent an effective strategy for the treatment of ocular diseases, for which a suitable carrier has yet to be sufficiently developed. Herein, an eye-compatible sodium polystyrene sulfonate resin (SPSR) was synthesized with a uniform particle size of about 3 µm. Ligustrazine phosphate (LP) was adsorbed to SPSR by cation exchange to form LP@SPSR. LP@SPSR suspension eye drops were further developed using the combination of Carbopol 934P and xanthan gum as suspending agents. The LP@SPSR suspension showed a sustained release in vitro, which was consistent with the observed porcine corneal penetration ex vivo. Pharmacokinetics in tear fluid of rabits indicated that LP@SPSR suspension led to prolonged ocular retention of LP and a 2-fold improved the area under the drug concentration-time curve (AUC0-t). Pharmacokinetics in the aqueous humor of rabbits showed 2.8-fold enhancement in the AUC0-t compared to LP solution. The LP@SPSR suspension exhibited no cytotoxicity to human corneal epithelial cells, nor irritation was observed in rabbit eyes. Thus, the LP@SPSR suspension has been validated as a safe and sustained release system leading to enhanced ophthalmic bioavailability for treating ocular diseases.

Physiologically Based Pharmacokinetic Modeling and Clinical Extrapolation for Topical Application of Pilocarpine on Eyelids: A Comprehensive Study.

Exploiting a convenient and highly bioavailable ocular drug delivery approach is currently one of the hotspots in the pharmaceutical industry. Eyelid topical application is seen to be a valuable strategy in the treatment of chronic ocular diseases. To further elucidate the feasibility of eyelid topical administration as an alternative route for ocular drug delivery, pharmacokinetic and pharmacodynamic studies of pilocarpine were conducted in rabbits. Besides, a novel physiologically based pharmacokinetic (PBPK) model describing eyelid transdermal absorption and ocular disposition was developed in rabbits. The PBPK model of rabbits was extrapolated to human by integrating the drug-specific permeability parameters and human physiological parameters to predict ocular pharmacokinetic in human. After eyelid topical application of pilocarpine, the concentration of pilocarpine in iris peaked at 2 h with the value of 18,724 ng/g and the concentration in aqueous humor peaked at 1 h with the value of 1,363 ng/mL. Significant miotic effect were observed from 0.5 h to 4.5 h after eyelid topical application of pilocarpine in rabbits, while that were observed from 0.5 h to 3.5 h after eyedrop instillation. The proposed eyelid PBPK model was capable of reasonably predicting ocular exposure of pilocarpine after application on the eyelid skin and based on the PBPK model, the human ocular concentration was predicted to be 10-fold lower than that in rabbits. And it was suggested that drugs applied on the eyelid skin could transfer into the eyeball through corneal pathway and scleral pathway. This work could provide pharmacokinetic and pharmacodynamic data for the development of eyelid drug delivery, as well as the reference for clinical applications.

Mechanism of Ocular Penetration of Lipophilic Drugs from Lipophilic Vehicles.

Since eyedrops have conventionally been formulated in aqueous vehicles, ocular pharmacokinetic studies are generally performed using aqueous buffers to identify physicochemical properties of the drug and the vehicles that influence drug absorption. In recent years, biocompatible lipophilic vehicles are increasingly finding application in ocular drug delivery; however, the mechanism of drug penetration from these non-aqueous vehicles is poorly understood. This study aims to compare ocular penetration of the model lipophilic drug curcumin when incorporated into lipophilic vehicles. To elucidate whether intrinsic solubility in the lipophilic vehicle influences ocular penetration, a curcumin solution and suspension were prepared in medium chain triglycerides (MCT) and squalane, respectively. Ocular penetration and distribution of curcumin from both vehicles was compared and evaluated qualitatively and quantitatively ex vivo. Significantly greater and faster penetration was observed from the squalane suspension than from the MCT solution in all ocular tissues. Our results suggest that the ability of lipophilic drugs to partition out of lipophilic vehicles and into cell membranes, rather than their intrinsic solubility in the lipophilic vehicle, determines the rate and extent of their ocular penetration.

Enhanced ophthalmic bioavailability and stability of atropine sulfate via sustained release particles using polystyrene sulfonate resin.

Atropine sulfate (ATS) eye drops at low concentrations constitute a limited selection for myopia treatment, with challenges such as low ophthalmic bioavailability and inadequate stability. This study proposes a novel strategy by synthesizing ophthalmic sodium polystyrene sulfonate resin (SPSR) characterized by a spherical shape and uniform size for cationic exchange with ATS. The formulation of ATS@SPSR suspension eye drops incorporates xanthan gum and hydroxypropyl methylcellulose (HPMC) as suspending agents. In vitro studies demonstrated that ATS@SPSR suspension eye drops exhibited sustained release characteristics, and tropic acid, its degradation product, remained undetected for 30 days at 40 °C. The ATS levels in the tear fluids and aqueous humor of New Zealand rabbits indicated a significant increase in mean residence time (MRT) and area under the drug concentration-time curve (AUC0-12h) for ATS@SPSR suspension eye drops compared to conventional ATS eye drops. Moreover, safety assessment confirmed the non-irritating nature of ATS@SPSR suspension eye drops in rabbit eyes. In conclusion, the cation-responsive sustained-release ATS@SPSR suspension eye drops enhanced the bioavailability and stability of ATS, offering a promising avenue for myopia treatment.

Codetermination of antimicrobial agents in rabbit tear fluid using LC-MS/MS assay: Insights into ocular pharmacokinetic study.

Managing ocular microbial infections typically requires pharmacotherapy using antibiotic eye drops, such as moxifloxacin hydrochloride (MFX), combined with an antifungal agent like amphotericin B (AB). We carried out and validated an LC-MS/MS assay to quantify these compounds in rabbit tear fluid in order to look into the pharmacokinetics of these two drugs. We employed a protein precipitation technique for the extraction of drugs under examination. A Waters Symmetry C18 column was used to separate the analytes and internal standard. The composition of the mobile phase was like (A) 0.1% v/v formic acid in water and (B) methanol. The detection of MFX and AB was accomplished through the utilization of positive ion electrospray ionization under multiple reaction monitoring mode. The linearity curves for both analytes exhibited an acceptable trendline across a concentration range of 2.34-300 ng/mL for MFX and 7.81-1000 ng/mL for AB in surrogate rabbit tear fluid. The lower limit of quantitation for MFX was 2.34 ng/mL, while for AB, it was 7.81 ng/mL. The approach was strictly validated, encompassing tests of selectivity, linearity (with r2 > 0.99), precision, accuracy, matrix effects, and stability. Consequently, we employed this method to evaluate the pharmacokinetics profiles of MFX and AB in rabbit tear fluid following single topical doses.

Prolonged Release Niosomes For Ocular Delivery of Loteprednol: Ocular Distribution Assessment on Dry Eye Disease Induced Rabbit Model.

Loteprednol etabonate (LE) is a topical corticosteroid for the symptomatic management of ocular conditions, encompassing both allergic and infectious etiologies. Owing to the dynamic and static barriers of the eye, LE exhibits significantly low bioavailability, necessitating an increase in the frequency of drug administration. The objective of this study is to overcome the limitations by developing niosomal systems loaded with LE. Design of Experiments (DoE) approach was used for the development of optimal niosome formulation. The optimal formulation was characterized using DLS, FT-IR, and DSC analysis. In vitro and ex vivo release studies were performed to demonstrate drug release patterns. After that HET-CAM evaluation was conducted to determine safety profile. Then, in vivo studies were carried out to determine therapeutic activity of niosomes. Zeta potential (ZP), particle size, polydispersity index (PI), and encapsulation efficacy (EE) were -33.8 mV, 89.22 nm, 0.192, and 89.6%, respectively. Medicated niosomes had a broad distribution within rabbit eye tissues and was absorbed by the aqueous humor of the bovine eye for up to 6 h after treatment. Cumulative permeated drug in the bovine eye and rabbit eye were recorded 52.45% and 54.8%, respectively. No irritation or hemorrhagic situation was observed according to the results of HET-CAM study. Thus, novel LE-loaded niosomal formulations could be considered as a promising treatment option for the dry-eye-disease (DED) due to enhanced bioavailability and decreased side effects.

Breaking Barriers: Nanomedicine-Based Drug Delivery for Cataract Treatment.

Cataract is a leading cause of blindness globally, and its surgical treatment poses a significant burden on global healthcare. Pharmacologic therapies, including antioxidants and protein aggregation reversal agents, have attracted great attention in the treatment of cataracts in recent years. Due to the anatomical and physiological barriers of the eye, the effectiveness of traditional eye drops for delivering drugs topically to the lens is hindered. The advancements in nanomedicine present novel and promising strategies for addressing challenges in drug delivery to the lens, including the development of nanoparticle formulations that can improve drug penetration into the anterior segment and enable sustained release of medications. This review introduces various cutting-edge drug delivery systems for cataract treatment, highlighting their physicochemical properties and surface engineering for optimal design, thus providing impetus for further innovative research and potential clinical applications of anti-cataract drugs.

Ocular Pharmacology.

Treatment of ocular diseases presents unique challenges and opportunities for the clinician and for the clinical pharmacologist. Ophthalmic pharmaceuticals, typically given as liquids, require consideration of solubility, physiological pH, and osmolarity, as well as sterility and stability, which in turn requires optimal pharmaceutics. Ocular tissue levels are challenging to obtain in humans, and the clinical pharmacokinetics is typically blood levels, which are primarily related to safety, rather than efficacy. The eye is a closed compartment with multiple physiological barriers with esterases and transporters, but relatively little cytochrome oxidases. Delivery routes include topical, intravitreal, and systemic. Patient dosing involves not only adherence issues common to all chronic diseases, but also performance requirements on eye drop instillation. Therapeutically, ocular diseases and their pharmacological treatments include both those analogous to systemic diseases (e.g., inflammation, infection, and neuronal degeneration) and those unique to the eye (e.g., cataract and myopia).

Computational Model of In Vivo Corneal Pharmacokinetics and Pharmacodynamics of Topically Administered Ophthalmic Drug Products.

INTRODUCTION: Although the eye is directly accessible on the surface of the human body, drug delivery can be extremely challenging due to the presence of multiple protective barriers in eye tissues. Researchers have developed complex formulation strategies to overcome these barriers to ophthalmic drug delivery. Current development strategies rely heavily on in vitro experiments and animal testing to predict human pharmacokinetics (PK) and pharmacodynamics (PD). OBJECTIVE: The primary objective of the study was to develop a high-fidelity PK/PD model of the anterior eye for topical application of ophthalmic drug products. METHODS: Here, we present a physiologically-based in silico approach to predicting PK and PD in rabbits after topical administration of ophthalmic products. A first-principles based approach was used to describe timolol dissolution, transport, and distribution, including consideration of ionized transport, following topical instillation of a timolol suspension. RESULTS: Using literature transport and response parameters, the computational model described well the concentration-time and response-time profiles in rabbit. Comparison of validated rabbit model results and extrapolated human model results demonstrate observable differences in the distribution of timolol at multiple time points. CONCLUSION: This modeling framework provides a tool for model-based prediction of PK in eye tissues and PD after topical ophthalmic drug administration to the eyes.

Development of a Thermosensitive In-Situ Gel Formulations of Vancomycin Hydrochloride: Design, Preparation, In Vitro and In Vivo Evaluation.

The purpose of this study was to develop a thermosensitive in situ gel delivery system based on Poloxamer 407 and Poloxamer 188 for ocular administration of vancomycin to treat systemic diseases. The vancomycin thermosensitive in situ gel was characterized using differential scanning calorimetry, rheological and drug release analyses. Additionally, pharmacokinetic studies and irritation tests of the gel were conducted after ocular administration in rabbits. The gel maintained a flowing liquid state under non-physiological conditions (25°C) to facilitate administration, and it transformed into a semi-solid state under physiological conditions (dilution with tears, 34°C), which prolonged its retention time in the eye. The gel erosion and drug release tests showed an excellent linear relationship between the cumulative drug release rate and the cumulative gel erosion rate, indicating a zero-order kinetic process. The pharmacokinetic analyses showed that the peak concentration, area under the curve, and bioavailability of the vancomycin thermosensitive in situ gel were 1.44, 1.98 and 1.93 times greater, respectively, that the values of vancomycin eye drops. Therefore, thermosensitive in situ gel may serve as a drug delivery system that can overcome the limitations of existing formulations of small-molecule peptides.

Eyes on Lipinski's Rule of Five: A New "Rule of Thumb" for Physicochemical Design Space of Ophthalmic Drugs.

The study objective was to investigate molecular thermodynamic properties of approved ophthalmic drugs and derive a framework outlining physicochemical design space for product development. Unlike the methodology used to obtain molecular descriptors for assessment of drug-like properties by Lipinski's Rule of 5 (Ro5), this work presents a retrospective approach based on in silico analysis of molecular thermodynamic properties beyond Ro5 parameters (ie, free energy of distribution/partitioning in octanol/water, dynamic polar surface area, distribution coefficient, and solubility at physiological pH) by using 145 marketed ophthalmic drugs. The study's focus was to delineate inherent molecular parameters explicitly important for ocular permeability and absorption from topical eye drops. A comprehensive parameter distribution analysis on ophthalmic drugs' molecular properties was performed. Frequencies in distribution analyses provided groundwork for physicochemical parameter limits of molecular thermodynamic properties having impact on corneal permeability and topical ophthalmic drug delivery. These parameters included free energy of partitioning (ΔGo/w) calculated based on thermodynamic free energy equation, distribution coefficient at physiological pH (clog DpH7.4), topological polar surface area (TPSA), and aqueous solubility (Sint, SpH7.4) with boundaries of clog DpH7.4 ≤4.0, TPSA ≤250 Å2, ΔGo/w ≤20 kJ/mol (4.8 kcal/mol), and solubility (Sint and SpH7.4) ≥1 µM, respectively. The theoretical free energy of partitioning model streamlined calculation of changes in the free energy of partitioning, Δ(ΔGo/w), as a measure of incremental improvements in corneal permeability for congeneric series. The above parameter limits are proposed as "rules of thumb" for topical ophthalmic drugs to assess risks in developability.

Difluprednate-Hydroxypropyl-ß-Cyclodextrin-Based Ophthalmic Solution for Improved Delivery in a Porcine Eye Model.

Purpose: Difluprednate (DFP) is an approved corticosteroid, available as an ophthalmic emulsion (Durezol®), used to treat pain and inflammation of the eye following ocular surgeries. This study utilized hydroxypropyl-ß-cyclodextrin (HPBCD)-based DFP ophthalmic solution for improved ocular delivery. Methods: The DFP-HPBCD complex formation was studied in the liquid and solid states. Phase solubility, molecular docking studies, differential scanning calorimetry, and Fourier transform infrared spectroscopy suggested inclusion complexation of DFP and HPBCD. Results: DFP-HPBCD-based eye drops (solution) provided 16 and 26 times higher transcorneal permeation when compared to the suspension (no HPBCD, control) and Durezol, respectively (P < 0.001). In addition, ocular drug distribution studies conducted in continuously perfused whole porcine eyes showed DFP permeated into all of the ocular tissues in significantly higher amounts than Durezol. Conclusions: The solution-based eye drops in this study is iso-osmotic, safe, and more permeable in porcine eyes compared to Durezol.

Nanotechnology for Topical Drug Delivery to the Anterior Segment of the Eye.

Topical drug delivery is one of the most challenging aspects of eye therapy. Eye drops are the most prevalent drug form, especially for widely distributed anterior segment eye diseases (cataracts, glaucoma, dry eye syndrome, inflammatory diseases, etc.), because they are convenient and easy to apply by patients. However, conventional drug formulations are usually characterized by short retention time in the tear film, insufficient contact with epithelium, fast elimination, and difficulties in overcoming ocular tissue barriers. Not more than 5% of the total drug dose administered in eye drops reaches the interior ocular tissues. To overcome the ocular drug delivery barriers and improve drug bioavailability, various conventional and novel drug delivery systems have been developed. Among these, nanosize carriers are the most attractive. The review is focused on the different drug carriers, such as synthetic and natural polymers, as well as inorganic carriers, with special attention to nanoparticles and nanomicelles. Studies in vitro and in vivo have demonstrated that new formulations could help to improve the bioavailability of the drugs, provide sustained drug release, enhance and prolong their therapeutic action. Promising results were obtained with drug-loaded nanoparticles included in in situ gel.

Ocular pharmacokinetics of atenolol, timolol and betaxolol cocktail: Tissue exposures in the rabbit eye.

Quantitative understanding of pharmacokinetics of topically applied ocular drugs requires more research to further understanding and to eventually allow predictive in silico models to be developed. To this end, a topical cocktail of betaxolol, timolol and atenolol was instilled on albino rabbit eyes. Tear fluid, corneal epithelium, corneal stroma with endothelium, bulbar conjunctiva, anterior sclera, iris-ciliary body, lens and vitreous samples were collected and analysed using LC-MS/MS. Iris-ciliary body was also analysed after intracameral cocktail injection. Non-compartmental analysis was utilized to estimate the pharmacokinetics parameters. The most lipophilic drug, betaxolol, presented the highest exposure in all tissues except for tear fluid after topical administration, followed by timolol and atenolol. For all drugs, iris-ciliary body concentrations were higher than that of the aqueous humor. After topical instillation the most hydrophilic drug, atenolol, had 3.7 times higher AUCiris-ciliary body than AUCaqueous humor, whereas the difference was 1.4 and 1.6 times for timolol and betaxolol, respectively. This suggests that the non-corneal route (conjunctival-scleral) was dominating the absorption of atenolol, while the corneal route was more important for timolol and betaxolol. The presented data increase understanding of ocular pharmacokinetics of a cocktail of drugs and provide data that can be used for quantitative modeling and simulation.

Optimized molecular imprints in gamma-irradiated collagen shields of an antifungal drug: In vitro characterization, in-vivo bioavailability enhancement.

The purpose of this manuscript is to develop sustained release molecularly imprinted voriconazole (VOR) that were loaded into collagen shield (CS) for ocular treatment of fungal keratitis. Various molecularly imprinted polymer (MIP) formulae were prepared by a precipitation polymerization technique. Different monomers and crosslinkers were tested to obtain better binding capacity. Two promising formulae; (F1: VOR: Acrylamide: ethylene glycol dimethacrylate (EGDMA): benzoyl peroxide (BPO) in the molar ratio of 1:5:15:1.6 mM, respectively) and (F3: VOR: Acrylamide: methyl methacrylic acid (MMA): EGDMA: BPO in the molar ratio 1:2.5:2.5:15:1.6 mM, respectively) were selected according to their binding capacities (82.79% ± 0.86, and 94.90% ± 1.25 respectively), and their release profiles over 48 h in simulated tears fluid (STF) (41.64 ± 1.92, and 85.39 ± 1.64 respectively). Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) were carried out. The selected CS (F1 CS and F3 CS) showed sustained release profiles (57.38%± 0.72, and 98.51%±0.49 respectively) over 72 h in STF. Results of trans-corneal permeation and antifungal activity were enhanced for the optimized formula (F3 CS) compared to (F1 CS) and drug solution. Furthermore, in vivo pharmacokinetic studies were conducted showing significant increase in Cmax, delayed Tmax and promoted relative bioavailability. After ocular insertion of F3 CS in male albino rabbits, histopathological studies were attained to assure the safety of the formula. Finally, optimized VOR-MIP-CS could provide promising ocular drug delivery systems (DDS).

Review of Approaches for Increasing Ophthalmic Bioavailability for Eye Drop Formulations.

Ophthalmic diseases represent a significant problem as over 2 billion people worldwide suffer from vison impairment and blindness. Eye drops account for around 90% of ophthalmic medications but are limited in success due to poor patient compliance and low bioavailability. Low bioavailability can be attributed to short retention times in the eye caused by rapid tear turnover and the difficulty of drug diffusion through the multi-layered structure of the eye that includes lipid-rich endothelial and epithelial layers as well as the stroma which is high in water content. In addition, there are barriers such as tight junctional complexes in the corneal epithelium, lacrimal turnover, nasolacrimal drainage, blinking reflexes, efflux transporters, drug metabolism by ocular enzymes, and drug binding to or repulsion from conjunctival mucins, tear proteins, and melanin. In order to maximize transport through the cornea while minimizing drug loss through other pathways, researchers have developed numerous methods to improve eye drop formulations including the addition of viscosity enhancers, permeability enhancers, mucoadhesives, and vasoconstrictors, or using formulations that include puncta occlusion, nanocarriers, or prodrugs. This review explains the mechanism behind each of these methods, examines their history, analyzes previous and current research, evaluates future applications, and discusses the pros and cons of each technique.

Enhancement in corneal permeability of riboflavin using cyclodextrin derivates complexes as a previous step to transepithelial cross-linking.

Corneal cross-linking has been described as an effective treatment to slow the progression of keratoconus. The standard protocol entails corneal epithelial removal to allow the diffusion of riboflavin into the stroma. Although, de-epithelization can generate risks or complications that transepithelial cross-linking tries to solve or avoid. Different formulations were developed after verifying that hydroxypropyl-ß-cyclodextrin (HPßCD) and sulfobuthylether-ß-cyclodextrin (SBEßCD) in a 20% concentration, increased the solubility of practically insoluble in water drugs such as riboflavin from 0.12 mg/mL to 0.35 mg/mL and 0.29 mg/mL respectively. These values were higher when chitosan and arginine were added to the formulation, showing solubility of 0.78 mg/mL when HPßCD concentration was not modified. Ex vivo corneal permeability was measured after having kept in contact bovine corneas with intact epithelium for 5 h with the 0.1 mg/mL riboflavin solution, the formulations developed and a reproduced nanoemulsion from another work. Riboflavin's permeability was increased when cyclodextrins, chitosan, and arginine were part of the formulations, compared to the control drug solution. The best permeability coefficient was reached when riboflavin was combined with 40% (w/v) HPßCD, 0.5% (w/w) arginine, and 0.5% (w/w) chitosan. After having carried out toxicity studies as bovine corneal opacity and permeability (BCOP) and Hens Egg Test - Chorioallantoic Membrane Test (HET-CAM) it was verified that both, the active ingredients and the excipients of the different formulations were not harmful without generating irritation, loss of transparency or corneal permeability alterations. The results show the great potential of the ocular developed solution for their use in transepithelial cross-linking for keratoconus treatment.

Pharmacokinetics and efficacy of a ketorolac-loaded ocular coil in New Zealand white rabbits.

Eye drops are considered standard practice for the delivery of ocular drugs. However, low patient compliance and low drug levels compromise its effectiveness. Our group developed a ketorolac-loaded ocular coil for sustained drug delivery up to 28 days. The aim of this study was to gain insight into the pharmacokinetics and efficacy of the ocular coil. The pharmacokinetics of the ketorolac-loaded ocular coil versus eye drops were tested in New Zealand White rabbits by repetitive sampling for 28 days. Efficacy of the ocular coil was also tested in New Zealand White rabbits. Ocular inflammation was induced where after the ocular coil was inserted, or eye drops, or no treatment was provided. The total protein concentration and cytokine levels were measured in tears, aqueous humor, and plasma at 4 h, 8 h, 24 h, 4 d, 7 d, 14 d, 21 d, and 28 d. Four h after inserting the ocular coil in the eye, ketorolac levels in aqueous humor and plasma were higher in the ocular coil group than in the eye drop group. Ketorolac released from the ocular coil could be detected up to 28 d in tears, up to 4 d in aqueous humor and up to 24 h in plasma. After inducing inflammation, both the ocular coil and eye drops were able to suppress prostaglandin E2, TNFα and IL-6 levels in aqueous humor and plasma as compared to the group that received no treatment. To conclude, the ocular coil facilitated a sustained release of the drug and showed similar therapeutic benefit in suppressing post-operative inflammation as eye drops.