[Status of occupational exposure limits of air toxic substances in the GESTIS Substances Database].

Objective: In order to understand the current situation of air toxic substances without occupational exposure limits (OELs) in the workplace in the Germany GESTIS Substance Database, and to provide an effective reference for formulating OELs of corresponding toxic substances and improving health standards. Methods: From March 2022 to May 2023, based on the standard of GBZ 2.1-2019 Occupational Exposure Limits for Hazardous Agents in the Workplace-Part 1: Chemical Hazardous Agents, air toxic substances without OELs in the standard of GBZ/T 300.1-2017 Determination of Toxic Substances in Workplace Air-Part 1: General Principles were screened out, then corresponding OELs in other countrie/regions were queried through the Germany GESTIS Substance Database. Results: Among the 333 kinds (classes) of air toxic substances in 160 parts of GBZ/T 300.1-2017 standard, 48 kinds (classes) of air toxic substances were screened out and had not yet been formulated OELs in GBZ 2.1-2019 standard. By querying the Germany GESTIS Substance Database, it was found that among the 48 kinds (classes) of air toxic substances, 35 kinds (classes) of air toxic substances had both 8-hour occupational exposure limit and short-term occupational exposure limit, 4 kinds (classes) of air toxic substances had 8-hour occupational exposure limit but no short-term occupational exposure limit, 9 kinds (classes) of air toxic substances hadn't been retrieved any OELs. In addition, standard test methods of 7 kinds of air toxic substances hadn't been published in the present, including trimethylchlorosilane, trimethylbenzenes, cumene, chloroethane, chloropropane, dibromoethane and acetophenone. Conclusion: In the process of formulating or revising the standards of GBZ 2.1-2019 and GBZ/T 300, the latest published OELs in the Germany GESTIS Substance Database could be used as a reference basis.

Identification and Removal of Pollen Spectral Interference in the Classification of Hazardous Substances Based on Excitation Emission Matrix Fluorescence Spectroscopy.

Sensitively detecting hazardous and suspected bioaerosols is crucial for safeguarding public health. The potential impact of pollen on identifying bacterial species through fluorescence spectra should not be overlooked. Before the analysis, the spectrum underwent preprocessing steps, including normalization, multivariate scattering correction, and Savitzky-Golay smoothing. Additionally, the spectrum was transformed using difference, standard normal variable, and fast Fourier transform techniques. A random forest algorithm was employed for the classification and identification of 31 different types of samples. The fast Fourier transform improved the classification accuracy of the sample excitation-emission matrix fluorescence spectrum data by 9.2%, resulting in an accuracy of 89.24%. The harmful substances, including Staphylococcus aureus, ricin, beta-bungarotoxin, and Staphylococcal enterotoxin B, were clearly distinguished. The spectral data transformation and classification algorithm effectively eliminated the interference of pollen on other components. Furthermore, a classification and recognition model based on spectral feature transformation was established, demonstrating excellent application potential in detecting hazardous substances and protecting public health. This study provided a solid foundation for the application of rapid detection methods for harmful bioaerosols.

A comprehensive perspective on potentially hazardous elements (PHEs) bound with particulate matters in ambient air of landfill sites: a systematic review and probabilistic risk assessment.

Air pollution from Potentially Hazardous Elements bound with particulate matter (PHEs bound PM) in landfill air is a significant concern for human health. To date, no comprehensive research has focused on the health risks of PHEs bound to PM in landfill air. This systematic review aimed to examine PHEs, including Lead (Pb), Cadmium (Cd), Chromium (Cr), Arsenic (As), Nickel (Ni), and Zinc (Zn) bound with PM in landfill air and assess the health risk for workers and waste management personnel. The systematically search was made in different electronic databases. After the screening, 18 most relevant studied focused on PHEs bound PM in landfill air were selected. The data extraction analysis indicated that mean concentrations of Pb, Cd, Cr, As, Ni, and Zn in landfill air were 0.3037, 0.0941, 0.4093, 0.0221, 0.2768, and 0.7622 µg/m3, respectively. Except for Pb, the concentrations of other PHEs bound to PM exceeded USEPA air quality standards. In addition, Non-carcinogenic risks from Cd, Cr, and Ni exposure exceeded permissible limits (HQ > 1), while As had an HQ value of 0.401. Carcinogenic risks from As, Cd, Ni, and Pb exposure were 1.31 × 10-5, 5.10 × 10-4, 3.51 × 10-5, and 2.03 × 10-6, respectively. Notably, the lifetime carcinogenic risk for workers exposed to Cr in polluted air (6.17 × 10-3) exceeded permissible limits (10-4 to 10-6). In conclusion, given the high carcinogenic and non-carcinogenic risks of some PHEs bound PM in landfills, it is necessary to conduct more research on the health effects of interaction with these PHEs bound PM on communities and the environment in different countries. Also, it is necessary to evaluate the role of different landfill operational activities on atmospheric dispersion of PHEs bound PM) in landfill air.

Do hazardous substances in demolition waste hinder circular economy?

Hazardous substances in demolition waste are often deemed a barrier to a circular economy owing to concerns about their fate in recycled materials. However, with the growing demand for recycling materials, it is essential to find circular solutions for construction materials but still protect health and the environment by managing hazardous substances. In this study, selected hazardous substance groups were analysed from demolition waste samples. Most of the concentrations did not raise any concerns when the safety of recycling materials was considered. However, the detection limits of laboratory chemical analysis can be discussed, as bromine was found in samples by an X-ray fluorescence (XRF)-analyser, but only one laboratory detected brominated flame retardants (BRFs). New technologies and practices are needed to follow the chemical content of materials used in the construction phase. Detecting hazardous substances in recyclable materials is the only way to achieve harmless material cycles.

[Screening of Highly Hazardous Pollutants in Groundwater of Beijing].

Groundwater contaminants pose a great threat to water safety and human health. Therefore, in this study, the traditional hazard assessment method was improved and a comprehensive system covering hazard assessment, screening, and characterization by combining the toxicological priority index (Tox Pi) framework; absorption, distribution, metabolism, and excretory (ADME) analysis; and bipartite network analysis was constructed. Then, the system was applied to hazard assessment and toxic pollutants screening from the 234 hydrophobic organic contaminants (HOCs) identified in the groundwater of Beijing. First, the top 20 pollutants with hazard potential were screened out using the Tox Pi method. Subsequently, 17 high-priority HOCs were further identified based on the ADME property analysis. Then, the molecular targets of these 17 high-priority HOCs were characterized through systematic bipartite network analysis. Finally, ten HOCs with high hazard were screened through correlation and weighted average analysis, and it was revealed that their toxic effects were mainly concentrated in the endocrine-disrupting effect, carcinogenic effect, and genetic toxicity. This study provides technical support for the prevention of regional groundwater contaminants.

Oral bioaccessibility of potentially toxic elements in various urban environmental media.

An important aspect of geochemical studies is determining health hazard of potentially toxic elements (PTEs). Key information on PTEs behaviour in the human body in case of their ingestion is provided with the use of in vitro bioaccessibility tests. We analysed and compared oral bioaccessibility of a wide range of PTEs (As, Cd, Ce, Cr, Cu, Hg, La, Li, Ni, Pb, Sb, Sn, Zn), including some that are not often studied but might pose a human health hazard, in soil, attic dust, street dust, and household dust, using Unified BARGE Method (UBM). Additionally, feasibility of usage of scanning electron microscope techniques in analyses of solid residuals of UBM phases was tested. Results show that bioaccessible fractions (BAFs) of PTEs vary significantly between individual samples of the same medium, between different media and between the gastric and gastro-intestinal phases. In soil, attic dust and street dust, bioaccessibility of individual PTE is mostly higher in gastric than in gastro-intestinal phase. The opposite is true for PTEs in household dust. In all four media, with the exception of Pb in household dust, among the most bioaccessible PTEs in gastric phase are Cd, Cu, Pb, and Zn. During the transition from the stomach to small intestine, the mean BAFs of most elements in soil, attic dust, and street dust decreases. The most bioaccessible PTEs in gastro-intestinal phase are Cu, Cd, Ni, and As. Micromorphological and chemical characterisation at individual particle level before and after bioaccessibility test contribute significantly to the understanding of oral bioaccessibility.

Sources and human health risks associated with potentially toxic elements (PTEs) in urban dust: A global perspective.

Long-term exposure to urban dust containing potentially toxic elements (PTEs) poses detrimental impacts on human health. However, studies estimating human health risks in urban dusts from a global perspective are scarce. We evaluated data for twelve PTEs in urban dusts across 59 countries from 463 published articles, including their concentrations, input sources, and probabilistic risks to human health. We found that 34.1 and 60.3% of those investigated urban dusts have been heavily contaminated with As and Cd, respectively. The input of PTEs was significantly correlated with economic structure due to emissions of industrial activities and traffic emissions being the major sources. Based on the Monte Carlo simulation, we found that the mean hazard index below the safe threshold (1.0) could still cause non-negligible risks to human health. Arsenic and Cr were the major PTEs threatening human health, and relatively high risk levels were observed in cities in China, Korea, Chile, Malaysia, and Australia. Importantly, our analysis suggested that PTEs threaten the health of approximately 92 million adults and 280 million children worldwide. Overall, our study provides important foundational understanding and guidance for policy decision-making to reduce the potential risks associated with PTE exposure and to promote sustainable development of urban economies.

Plant-based food contact materials: presence of hazardous substances.

As a result of the European Single Use Plastic Directive and as part of the transition to a circular economy, plastic food contact materials (FCMs) are being replaced, often by renewable plant-based materials. This research aimed to identify which chemical substances are present in plant-based materials. In 2022 a total of 28 samples of the latter materials from the Dutch market were analysed for 313 active substances from plant protection products, 47 per- and polyfluoralkyl substances (PFASs) and 27 heavy metals and other elements. Ten samples contained plant protection products that are not authorised in the EU. Most materials contained PFASs at trace or even high levels. Three out of four investigated sugar cane materials contained 6:2 fluorotelomer alcohol at levels up to 1.7 mg/kg. High contents of aluminium, manganese, iron, zinc, and barium were found. Other heavy metals, such as arsenic, lead and mercury were found in relatively low contents. A broad GC-MS screening was performed, which revealed the presence of plant extractable, plasticisers, antioxidants and hydrocarbons, which were not all authorised for FCMs, but may be present as non-intentionally added substances.

Effects of hazardous chemicals on secondary sex ratio: A comprehensive review.

The secondary sex ratio (SSR), defined as the ratio of male to female offspring at birth, has garnered significant scientific interest due to its potential impact on population dynamics and evolution. In recent years, there has been a growing concern regarding the potential consequences of environmental chemicals on the SSR, given their widespread exposure and potential enduring ramifications on the reproductive system. While SSR serves as an indicator of health, ongoing research and scientific inquiry are being conducted to explore the potential relationship between chemicals and offspring ratio. Although some studies have suggested a possible correlation, others have yielded inconclusive results, indicating that the topic is intricate and still needs to be elucidated. The precise mechanism by which chemical agents exert their influence on the SSR remains ambiguous, with disruption of the endocrine system being a prominent justification. In light of the complex interplay between chemical exposure and SSR, the present review aims to comprehensively examine and synthesize existing scientific literature to gain a deeper understanding of how specific chemical exposures may impact SSR. Insights into chemical hazards that shift SSR patterns or trends could guide prevention strategies, including legislative bans of certain chemicals, to minimize environmental and public health risks.

Assessing pollution degree and human health risks from hazardous element distribution in soils near gold mines in a Colombian Andean region: Correlation with phytotoxicity biomarkers.

The assessment of human health risk due to the presence of hazardous elements in the environment is now necessary for environmental management and legislative initiatives. This study aims to determine the contamination by As, Cd, Pb, and Cr in soils near gold mines in three municipalities located in the Andean region of Colombia. One of the main objectives of the study is to explore possible correlations between the Lifetime Cancer Risk (LCR) and phytotoxicity biomarkers using a simple and rapid-response plant model, radish (Raphanus sativus L.). In the municipality of Yalí, Puerto Berrío, and Buriticá, the hazardous elements concentrations ranged from 8.1 to 35.5, 1.7 to 892, and 5.8 to 49.8 for As, 0.1 to 4.6, 0.1 to 65.2, and 0.5 to 18.2 for Cd, 18.5 to 201.3, 13.0 to 1908, and 189 to 2345 for Pb, and 5.4 to 118.4, 65.4 to 301, and 5.4 to 102.3 for Cr, respectively. The results showed that the biomarkers intracellular H2O2 concentration, antioxidant activity, and radicle elongation exhibited significant (P < 0.05) variations associated with the concentration of hazardous elements in the soils. Significant correlations (P < 0.05, r > 0.58) were found between the biomarkers and the LCR for Cd, Pb, and Cr, but not for As. The results using biomarkers reveal that soil pH and organic matter content are important variables that control the bioavailability of these elements in the soil. The use of indicators like LCR alone has limitations and should be accompanied by the use of biomarkers that allow for a better understanding of the biological system's response to exposure to potentially toxic elements. The results obtained show the urgent need to implement public policies to minimize exposure to hazardous substances in areas near gold mining projects.

Geographic information system-based determination of priority monitoring areas for hazardous air pollutants in an industrial city.

Industrial cities are hotspots for many hazardous air pollutants (HAPs), which are detrimental to human health. We devised an identification method to determine priority HAP monitoring areas using a comprehensive approach involving monitoring, modeling, and demographics. The methodology to identify the priority HAP monitoring area consists of two parts: (1) mapping the spatial distribution of selected categories relevant to the target pollutant and (2) integrating the distribution maps of various categories and subsequent scoring. The identification method was applied in Ulsan, the largest industrial city in South Korea, to identify priority HAP monitoring areas. Four categories related to HAPs were used in the method: (1) concentrations of HAPs, (2) amount of HAP emissions, (3) the contribution of industrial activities, and (4) population density in the city. This method can be used to select priority HAP monitoring areas for intensive monitoring campaigns, cohort studies, and epidemiological studies.

Portable Mass Spectrometry for On-site Detection of Hazardous Volatile Organic Compounds via Robotic Extractive Sampling.

Various hazardous volatile organic compounds (VOCs) are frequently released into environments during accidental events that cause many hazards to ecosystems and humans. Therefore, rapid, sensitive, and on-site detection of hazardous VOCs is crucial to understand their compositions, characteristics, and distributions in complex environments. However, manual handling of hazardous VOCs remains a challenging task, because of the inaccessible environments and health risk. In this work, we designed a quadruped robotic sampler to reach different complex environments for capturing trace hazardous VOCs using a needle trap device (NTD) by remote manipulation. The captured samples were rapidly identified by portable mass spectrometry (MS) within minutes. Rapid detection of various hazardous VOCs including toxicants, chemical warfare agents, and burning materials from different environments was successfully achieved using this robot-MS system. On-site detection of 83 typical hazardous VOCs was examined. Acceptable analytical performances including low detection limits (at subng/mL level), good reproducibility (relative standard deviation (RSD) < 20%, n = 6), excellent quantitative ability (R2 > 0.99), and detection speed (within minutes) were also obtained. Our results show that the robot-MS system has excellent performance including safety, controllability, applicability, and robustness under dangerous chemical conditions.

Fragmentation characteristics-based nontargeted screening method of exogenous chemical residues in animal-derived foods using reversed-phase and hydrophilic interaction liquid chromatography-high-resolution mass spectrometry.

Fragmentation characteristics are crucial for nontargeted screening to discover and identify unknown exogenous chemical residues in animal-derived foods. In this study, first, fragmentation characteristics of 51 classes of exogenous chemical residues were summarized based on experimental mass spectra of standards in reversed-phase and hydrophilic interaction liquid chromatography-high-resolution mass spectrometry (MS) and mass spectra from the MassBank of North America (MoNA) library. According to the proportion of fragmentation characteristics to the total number of chemical residues in each class, four screening levels were defined to classify 51 classes of chemical residues. Then, a nontargeted screening method was developed based on the fragmentation characteristics. The evaluation results of 82 standards indicated that more than 90 % of the chemical residues with MS/MS spectra can be identified at concentrations of 100 and 500 µg/kg, and about 80 % can be identified at 10 µg/kg. Finally, the nontargeted screening method was applied to 16 meat samples and 21 egg samples as examples. As a result, eight chemical residues and transformation products (TPs) of 5 classes in the exemplary samples were found and identified, in which 3 TPs of azithromycin were identified by fragmentation characteristics-assisted structure interpretation. The results demonstrated the practicability of the nontargeted screening method for routine risk screening of food safety.

Recycled tire rubber materials in the spotlight. Determination of hazardous and lethal substances.

One way of recycling end-of-life tires is by shredding them to obtain crumb rubber, a microplastic material (<0.5 mm), used as infill in artificial turf sports fields or as playground flooring. There is emerging concern about the health and environmental consequences that this type of surfaces can cause. This research aims to develop an analytical methodology able to determine 11 compounds of environmental and health concern, including antiozonants such as N-1,3-dimethylbutyl-N'-phenyl-p-phenylenediamine (6PPD) or N, N´-diphenyl-1,4-phenylenediamine (DPPD), and vulcanization and crosslinking agents, such as N-cyclohexylbenzothiazole-2-sulfenamide (CBS), 1,3-di-o-tolylguanidine (DTG) or hexamethoxymethylmelamine (HMMM) from tire rubber. Ultrasound assisted extraction followed by liquid chromatography coupled to tandem mass spectrometry (UAE-LC-MS/MS) is validated demonstrating suitability. The methodology is applied to monitor the target compounds in forty real crumb rubber samples of different origin including, football pitches, outdoor and indoor playgrounds, urban pavements, commercial samples, and tires. Several alternative infill materials, such as sand, cork granulates, thermoplastic elastomers and coconut fibres, are also collected and analysed. All the target analytes are identified and quantified in the crumb rubber samples. The antiozonant 6PPD is present at the highest concentrations up to 0.2 % in new synthetic fields. The tire rubber-derived chemical 6PPD-quinone (2-((4-methylpentan-2-yl)amino)-5-(phenylamino)cyclohexa-2,5-diene-1,4-dione), recently linked to acute mortality in salmons, is found in all types of crumb rubber samples attaining concentrations up to 40 µg g-1 in football pitches. The crosslinking agent HMMM is detected in most of the playing surfaces, at concentrations up to 36 µg g-1. The tested infill alternatives are free of most of the target compounds. To the best of our knowledge, this study is the largest study considering the target compounds in tire rubber particles and the first to focus on these compounds in playgrounds including the analysis of HMMM, 6PPD-quinone and DTG in crumb rubber used as an infill material.

Identification of hazardous organic compounds in e-waste plastic using non-target and suspect screening approaches.

End-of-life electric and electronic devices stand as one of the fastest growing wastes in the world and, therefore, a rapidly escalating global concern. A relevant fraction of these wastes corresponds to polymeric materials containing a plethora of chemical additives. Some of those additives fall within the category of hazardous organic compounds (HOCs). Despite the significant advances in the capabilities of analytical methods, the comprehensive characterization of WEEE plastic remains as a challenge. This research strives to identify the primary additives within WEEE polymers by implementing a non-target and suspect screening approach. Gas chromatography coupled to time-of-flight mass spectrometry (GC-QTOF-MS), using electron ionization (EI), was applied for the detection and identification of more than 300 substances in this matrix. A preliminary comparison was carried out with nominal resolution EI-MS spectra contained in the NIST17 library. BPA, flame retardants, UV-filters, PAHs, and preservatives were among the compounds detected. Fifty-one out of 300 compounds were confirmed by comparison with authentic standards. The study establishes a comprehensive database containing m/z ratios and accurate mass spectra of characteristic compounds, encompassing HOCs. Semi-quantification of the predominant additives was conducted across 48 WEEE samples collected from handling and dismantling facilities in Galicia. ABS plastic demonstrated the highest median concentrations, ranging from 0.154 to 4456 µg g-1, being brominated flame retardants and UV filters, the families presenting the highest concentrations. Internet router devices revealed the highest concentrations, containing a myriad of HOCs, such as tetrabromobisphenol A (TBBPA), tribromophenol (TBrP), triphenylphosphate (TPhP), tinuvin P and bisphenol A (BPA), most of which are restricted in Europe.

G-YOLO: A YOLOv7-based target detection algorithm for lightweight hazardous chemical vehicles.

Hazardous chemical vehicles are specialized vehicles used for transporting flammable gases, medical waste, and liquid chemicals, among other dangerous chemical substances. During their transportation, there are risks of fire, explosion, and leakage of hazardous materials, posing serious threats to human safety and the environment. To mitigate these possible hazards and decrease their probability, this study proposes a lightweight object detection method for hazardous chemical vehicles based on the YOLOv7-tiny model.The method first introduces a lightweight feature extraction structure, E-GhostV2 network, into the trunk and neck of the model to achieve effective feature extraction while reducing the burden of the model. Additionally, the PConv is used in the model's backbone to effectively reduce redundant computations and memory access, thereby enhancing efficiency and feature extraction capabilities. Furthermore, to address the problem of performance degradation caused by overemphasizing high-quality samples, the model adopts the WIoU loss function, which balances the training effect of high-quality and low-quality samples, enhancing the model's robustness and generalization performance. Experimental results demonstrate that the improved model achieves satisfactory detection accuracy while reducing the number of model parameters, providing robust support for theoretical research and practical applications in the field of hazardous chemical vehicle object detection.

A Hazard-Based Framework for Identifying Safer Alternatives to Classes of Chemicals: A Case Study on Phthalates in Consumer Products.

BACKGROUND: Humans are exposed to hazardous chemicals found in consumer products. In 2019, the Pollution Prevention for Healthy People and Puget Sound Act was passed in Washington State. This law is meant to reduce hazardous chemicals in consumer products and protect human health and the environment. The law directs the Washington State Department of Ecology to assess chemicals and chemical classes found in products, determine whether there are safer alternatives, and make regulatory determinations. OBJECTIVES: To implement the law, the Department of Ecology developed a hazard-based framework for identifying safer alternatives to classes of chemicals. METHODS: We developed a hazard-based framework, termed the "Criteria for Safer," to set a transparent bar for determining whether new chemical alternatives are safer than existing classes of chemicals. Our "Criteria for Safer" is a framework that builds on existing hazard assessment methodologies and published approaches for assessing chemicals and chemical classes. DISCUSSION: We describe implementation of our criteria using a case study on the phthalates chemical class in two categories of consumer products: vinyl flooring and fragrances used in personal care and beauty products. Additional context and considerations that guided our decision-making process are also discussed, as well as benefits and limitations of our approach. This paper gives insight into our development and implementation of a hazard-based framework to address classes of chemicals in consumer products and will aid others working to build and employ similar approaches. https://doi.org/10.1289/EHP13549.

Occupational exposure to chemical substances and health outcomes among hospital environmental services workers: A scoping review of international studies.

Environmental services (EVS) workers are essential to preventing the spread of disease in hospitals. However, their exposure to hazardous chemicals and drugs is understudied. This scoping review will synthesize literature on hazardous chemical exposures and adverse health outcomes among EVS workers to identify research gaps and trends for further investigation. The scoping review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines to ensure complete and accurate reporting. The scoping review included 25 studies on occupational exposure to chemicals among EVS workers in hospitals. Most studies focused on exposure to cleaning products, which led to dermal, respiratory, and ocular symptoms, oxidative stress, and inflammation. While personal protective equipment (PPE), training, education, and policies have the potential to enhance safety, further research is required to examine the long-term impacts of exposure and the cost-effectiveness of interventions. Future studies should utilize longitudinal approaches and self-reported data collection methods, such as diaries and interviews, to comprehensively assess exposure risks and develop effective interventions and policies. Future research is needed to understand the potential health risks faced by EVS workers from exposure to chemicals in hospitals. Longitudinal studies with objective exposure assessments and larger sample sizes should be conducted. Policies and interventions must be developed and implemented to improve safe work practices and reduce negative health outcomes.

Development of the Korean construction job exposure matrix (KoConJEM) based on experts' judgment using the 60 consolidated occupations for construction workers.

BACKGROUND: This study was conducted as an effort to develop a Korean construction job exposure matrix (KoConJEM) based on 60 occupations recently consolidated by the construction workers mutual aid association for use by the construction industry. METHODS: The probability, intensity, and prevalence of exposure to 26 hazardous agents for 60 consolidated occupations were evaluated as binary (Yes/No) or four categories (1 to 4) by 30 industrial hygiene experts. The score for risk was calculated by multiplying the exposure intensity by the prevalence of exposure. Fleiss' kappa for each hazardous agent and occupation was used to determine agreement among the 30 experts. The JEM was expressed on a heatmap and a web-based dashboard to facilitate comparison of factors affecting exposure according to each occupation and hazardous agent. RESULTS: Awkward posture, heat/cold, heavy lifting, and noise were hazardous agents regarded as exposure is probable by at least one or more experts in all occupations, while exposure to asphalt fumes was considered hazardous in the smallest number of occupations (n = 5). Based on the degree of agreement among experts, more than half of the harmful factors and most occupations showed fair to good results. The highest risk value was 16 for awkward posture for most occupations other than safety officer. CONCLUSIONS: The KoConJEM provides information on the probability, intensity, and prevalence of exposure to harmful factors, including most occupations employing construction workers; therefore, it may be useful in the conduct of epidemiological studies on assessment of health risk for construction workers.

Innovative analytical methodologies for characterizing chemical exposure with a view to next-generation risk assessment.

The chemical burden on the environment and human population is increasing. Consequently, regulatory risk assessment must keep pace to manage, reduce, and prevent adverse impacts on human and environmental health associated with hazardous chemicals. Surveillance of chemicals of known, emerging, or potential future concern, entering the environment-food-human continuum is needed to document the reality of risks posed by chemicals on ecosystem and human health from a one health perspective, feed into early warning systems and support public policies for exposure mitigation provisions and safe and sustainable by design strategies. The use of less-conventional sampling strategies and integration of full-scan, high-resolution mass spectrometry and effect-directed analysis in environmental and human monitoring programmes have the potential to enhance the screening and identification of a wider range of chemicals of known, emerging or potential future concern. Here, we outline the key needs and recommendations identified within the European Partnership for Assessment of Risks from Chemicals (PARC) project for leveraging these innovative methodologies to support the development of next-generation chemical risk assessment.