Integration of QSAR and NAM in the Read-Across Process for an Effective and Relevant Toxicological Assessment.

Read-Across (RAx) serves as a strategy to fill a data gap in the toxicological profile of a substance (target) using existing information on similar source substances. The principle is applied also to a category of substances for which similarity may follow a regular trend. Demonstration of similarity is not trivial and requires the analysis of different steps, starting from the precise analytical characterization of both target and source substances and including the analysis of the impact that each minor difference can have on the final outcome. Application of QSARs and performing new experimental tests within the new approach methodologies (NAMs) is necessary to increase confidence in the final prediction and reduce the uncertainty.

In Vitro Cell-Based MTT and Crystal Violet Assays for Drug Toxicity Screening.

The development of novel drug candidates is a current challenge in pharmacology where therapeutic benefits must exceed side effects. Toxicology testing is therefore a fundamental step in drug discovery research. Herein, we describe the first line of toxicology testing program, consisting in cell-based high-throughput screening assays, which have the advantage of being easy, rapid, cheap, and reproducible while providing quantitative information. We illustrate MTT and Crystal Violet assays, two common colorimetric tests able to assess both cytostatic and cytotoxic effects, respectively, of a drug candidate. MTT assay allows evaluation of cellular metabolic activity, by which cell viability can be inferred; Crystal Violet staining is directly correlated with attached viable cells, thus allowing direct assessment of cell survival and death. Therefore, combination of the two methodologies represents a useful tool for predicting drug sensitivity and efficacy, the first milestones in pre-clinical toxicology workflow.

TIRESIA and TISBE: Explainable Artificial Intelligence Based Web Platforms for the Transparent Assessment of the Developmental Toxicity of Chemicals and Drugs.

Developmental toxicity is key human health endpoint, especially relevant for safeguarding maternal and child well-being. It is an object of increasing attention from international regulatory bodies such as the US EPA (US Environmental Protection Agency) and ECHA (European CHemicals Agency). In this challenging scenario, non-test methods employing explainable artificial intelligence based techniques can provide a significant help to derive transparent predictive models whose results can be easily interpreted to assess the developmental toxicity of new chemicals at very early stages. To accomplish this task, we have developed web platforms such as TIRESIA and TISBE.Based on a benchmark dataset, TIRESIA employs an explainable artificial intelligence approach combined with SHAP analysis to unveil the molecular features responsible for calculating the developmental toxicity. Descending from TIRESIA, TISBE employs a larger dataset, an explainable artificial intelligence framework based on a fragment-based fingerprint encoding, a consensus classifier, and a new double top-down applicability domain. We report here some practical examples for getting started with TIRESIA and TISBE.

Ecotoxicological study of seven pharmaceutically active compounds: Mixture effects and environmental risk assessment.

Pharmaceutically active compounds (PhACs) have been detected in several aquatic compartments, which has been of environmental concern since PhACs can cause adverse effects on the aquatic ecosystem at low concentrations. Despite the variety of PhACs detected in surface water, ecotoxicological studies are non-existent for many of them, mainly regarding their mixture. In addition, water bodies can continuously receive the discharge of raw or treated wastewater with micropollutants. Thus, PhACs are subject to mixture and interactions, potentiating or reducing their toxicity. Therefore, the present study evaluated the toxicity on Aliivibrio fischeri of seven PhACs, which still needs to be explored in the literature. The effects were evaluated for the PhACs individually and for their binary and tertiary mixture. Also, the experimental effects were compared with the concentration addition (CA) and independent action (IA) models. Finally, an environmental risk assessment was carried out. Fenofibrate (FEN), loratadine (LOR), and ketoprofen (KET) were the most toxic, with EC50 of 0.32 mg L-1, 6.15 mg L-1 and 36.8 mg L-1, respectively. Synergistic effects were observed for FEN + LOR, KET + LOR, and KET + FEN + LOR, showing that the CA and IA may underestimate the toxicity. Environmental risks for KET concerning algae, and LOR e 17α-ethynylestradiol (EE2) for crustaceans and fish were high for several locations. Besides, high removals by wastewater treatment technologies are required to achieve the concentrations necessary for reducing KET and LOR risk quotients. Thus, this study contributed to a better understanding of the toxic interactions and environmental risks of PhACs.

[Development of a Novel Male Reproductive Toxicity Assessment Method to Predict Male-mediated Effects on the Next Generation].

Less than 10% of the candidate drug compounds are associated with male reproductive toxicity. Genetic and/or epigenetic information on sperm may be crucial for fetal development. Therefore, developmental toxicity, such as paternally transmitted birth defects, is possible if genetic abnormalities in the male germ line persist and accumulate in the sperm during spermatogenesis. First, this study provides an overview of chemical and male reproductive toxicity, which may lead to developmental toxicity from the perspective of male reproduction. Second, we demonstrate methods for evaluating male reproductive toxicity to anticipate male-mediated developmental toxicity. We developed a novel staining technique for evaluating sperm quality, as well as a noninvasive imaging analysis of male reproductive toxicity. The former is a mammalian male germ cell-specific staining method using reactive blue 2 dye (RB2), as previously confirmed in human sperm, and a method for detecting the early-stage DNA fragmentation in a single nucleus from mouse spermatozoa using single-cell pulsed-field gel electrophoresis. The latter is a new, ready-to-use, and compact magnetic resonance imaging (MRI) platform utilizing a high-field permanent magnet to evaluate male reproductive toxicity. The histopathological analysis supported the suitability of the MRI platform. The present study, for the first time, revealed a rapid, noninvasive evaluation of male reproductive toxicity in vivo using compact MRI. These novel toxicity assessments can help predict male-mediated developmental toxicity, contributing to accelerated drug discovery and drug repositioning.

Non-conventional endpoints show higher sulfoxaflor toxicity to Chironomus riparius than conventional endpoints in a multistress environment.

Evidence grows that standard toxicity testing might underestimate the environmental risk of neurotoxic insecticides. Behavioural endpoints such as locomotion and mobility have been suggested as sensitive and ecologically relevant additions to the standard tested endpoints. Possible interactive effects of chemicals and additional stressors are typically overlooked in standardised testing. Therefore, we aimed to investigate how concurrent exposure to environmental stressors (increased temperature and predation cues) and a nicotinic acetylcholine receptor (nAChR)-modulating insecticide ('sulfoxaflor') impact Chironomus riparius across a range of conventional and non-conventional endpoints. We used a multifactorial experimental design encompassing three stressors, sulfoxaflor (2.0-110 µg/L), predation risk (presence/absence of predatory cues), and elevated temperature (20 °C and 23 °C), yielding a total of 24 distinct treatment conditions. Additional stressors did not change the sensitivity of C. riparius to sulfoxaflor. To assess potential additive effects, we applied an Independent Action (IA) model to predict the impact on eight endpoints, including conventional endpoints (growth, survival, total emergence, and emergence time) and less conventional endpoints (the size of the adults, swimming abilities and exploration behaviour). For the conventional endpoints, observed effects were either lower than expected or well-predicted by the IA model. In contrast, we found greater than predicted effects of predation cues and temperature in combination with sulfoxaflor on adult size, larval exploration, and swimming behaviour. However, in contrast to the non-conventional endpoints, no conventional endpoints detected interactive effects of the neurotoxic insecticide and the environmental stressors. Acknowledging these interactions, increasing ecological context of ecotoxicological test systems may, therefore, advance environmental risk analysis and interpretation as the safe environmental concentrations of neurotoxic insecticides depend on the context of both the test organism and its environment.

Construction of a pumpless gravity-driven vascularized Skin-on-a-Chip for the study of hepatocytotoxicity in percutaneous exposure to exogenous chemicals.

The utilization of existing Skin-on-a-Chip (SoC) is constrained by the complex structures, the multiplicity of auxiliary devices, and the inability to evaluate exogenous chemicals that are hepatotoxic after percutaneous metabolism. In this study, a gravity-driven SoC without any auxiliary devices was constructed for the hepatocytotoxicity study of exogenous chemicals. The SoC possesses 3 layers of culture chambers, from top to bottom, for human skin equivalent (HSE), Human Umbilical Vein Endothelial Cells (HUVEC) and hepatocytes (HepG2), and the maintenance and expression capacity of the corresponding cells on the SoC were verified by specificity parameters. The reactivity of the SoC to exogenous chemicals was verified by 2-aminofluorene (2-AF). The SoC can realistically simulate the in vivo exposure process of exogenous chemicals that are percutaneously exposed and metabolized into the bloodstream and then to the liver to produce toxicity, and it can achieve the same effects on transcriptome as those of animal tests at lower exposure levels while examining multiple toxicological targets of the skin, vascular endothelial cells, and hepatocytes. Both in terms of species similarity, the principles of reduction, replacement and refinement (3R), or the level of exposure suggest that the present SoC has a degree of replacement for animal models in assessing exogenous chemicals, especially those that are hepatotoxic after percutaneous metabolism.

Faster ciguatoxin extraction methods for toxicity screening.

Ciguatera poisoning (CP) is a severe global public health problem caused by the consumption of seafood products contaminated with ciguatoxins (CTXs). The growing demand for seafood products requires high-throughput testing for CTX-susceptible seafood, however complex extraction and slow cleanup methods inhibit this goal. Herein, several methods for extracting CTXs from fish tissue were established and compared; these methods are sensitive, specific, and valid while achieving higher sample extraction throughput than currently established protocols. The trial fish material was generated from multiple species, with different physical conditions (wet and freeze-dried tissue), and naturally contaminated with various CTXs (i.e., CTX-1B, CTX-3C, and C-CTX-1), thus ensuring these methods are robust and broadly applicable. The extraction methods used were based on mechanical maceration with acetone or methanol or enzymatic digestion followed by acetone and ethyl acetate extraction. Crude extracts were investigated for CTX-like toxicity using an in vitro mouse neuroblastoma (N2a) cell-based assay (CBA). Among the three methods, there was no significant difference in toxin estimates (p = 0.219, two-way ANOVA), indicating their interchangeability. For speed (> 16 samples/day), accuracy (100%), and CTX analog retention confirmation by liquid chromatography-tandem mass spectrometry (LC‒MS/MS), the preferred extraction methods were both methanol and enzyme-based. All extraction methods post hoc confirmation of CTX analogs successfully met international seafood market-based CTX contaminant guidance. These methods can drastically increase global CTX screening capabilities and subsequently relieve sample processing bottlenecks, inhibiting environmental and human health-based CTX analysis.

Systematization of a toxicity screening method based on a combination of chemical analysis and the delayed fluorescence algal growth inhibition test for use in emergency environmental surveys.

In recent years, heavy rainfall disasters linked to climate change have become more frequent, raising concerns about the release of chemicals stored in factories. Assessing chemical contamination during such emergencies therefore necessitates the development of a quick and easy method for evaluating hazardous contaminants in combination with toxicity testing. This study proposes a "toxicity screening" method that combines biological response testing and chemical analysis to systematically evaluate hazardous contaminants in emergency situations. The toxicity screening method evaluates the water quality in three steps, including water quality measurements and a delayed fluorescence (DF) assay, metal content measurements and a DF assay, and targeted screening analysis and a DF assay. The efficacy of this method was tested using industrial wastewater from 14 locations. Seven of the samples were non-toxic, while the other seven samples were toxic, displaying no observed effect concentration (NOEC) values ranging from 0.625 to 20%. Two toxic samples in the first phase possessed high total chlorine concentrations (0.4 mg L-1) and conductivities (2200 mS m-1), indicating that the main sources of toxicity were residual chlorine and a high salt concentration. In the second phase, metal content analysis identified metals as the toxicity cause in four samples. In the third phase, the organic contaminants were analyzed, and tri-n-octyl phosphate (TNOP) was detected at a concentration of 0.00027 mg L-1. The results of solid-phase extraction experiments and exposure tests with TNOP alone indicated that the contribution of TNOP to the toxicity was negligible and that chemicals not adsorbed on the solid-phase extraction cartridges were the cause of toxicity. The proposed method can therefore be considered effective for disaster-related water quality assessment, delivering results within 12 days.

Generation, characterization, and toxicological assessment of reference ultrafine soot particles with different organic content for inhalation toxicological studies.

Ultrafine particles (UFP) are the smallest atmospheric particulate matter linked to air pollution-related diseases. The extent to which UFP's physical and chemical properties contribute to its toxicity remains unclear. It is hypothesized that UFP act as carriers for chemicals that drive biological responses. This study explores robust methods for generating reference UFP to understand these mechanisms and perform toxicological tests. Two types of combustion-related UFP with similar elemental carbon cores and physical properties but different organic loads were generated and characterized. Human alveolar epithelial cells were exposed to these UFP at the air-liquid interface, and several toxicological endpoints were measured. UFP were generated using a miniCAST under fuel-rich conditions and immediately diluted to minimize agglomeration. A catalytic stripper and charcoal denuder removed volatile gases and semi-volatile particles from the surface. By adjusting the temperature of the catalytic stripper, UFP with high and low organic content was produced. These reference particles exhibited fractal structures with high reproducibility and stability over a year, maintaining similar mass and number concentrations (100 µg/m3, 2.0·105 #/cm3) and a mean particle diameter of about 40 nm. High organic content UFP had significant PAH levels, with benzo[a]pyrene at 0.2 % (m/m). Toxicological evaluations revealed that both UFP types similarly affected cytotoxicity and cell viability, regardless of organic load. Higher xenobiotic metabolism was noted for PAH-rich UFP, while reactive oxidation markers increased when semi-volatiles were stripped off. Both UFP types caused DNA strand breaks, but only the high organic content UFP induced DNA oxidation. This methodology allows modification of UFP's chemical properties while maintaining comparable physical properties, linking these variations to biological responses.

Microbiological toxicity tests using standardized ISO/OECD methods-current state and outlook.

Microbial toxicity tests play an important role in various scientific and technical fields including the risk assessment of chemical compounds in the environment. There is a large battery of normalized tests available that have been standardized by ISO (International Organization for Standardization) and OECD (Organization for Economic Co-operation and Development) and which are worldwide accepted and applied. The focus of this review is to provide information on microbial toxicity tests, which are used to elucidate effects in other laboratory tests such as biodegradation tests, and for the prediction of effects in natural and technical aqueous compartments in the environment. The various standardized tests as well as not normalized methods are described and their advantages and disadvantages are discussed. In addition, the sensitivity and usefulness of such tests including a short comparison with other ecotoxicological tests is presented. Moreover, the far-reaching influence of microbial toxicity tests on biodegradation tests is also demonstrated. A new concept of the physiological potential of an inoculum (PPI) consisting of microbial toxicity tests whose results are expressed as a chemical resistance potential (CRP) and the biodegradation adaptation potential (BAP) of an inoculum is described that may be helpful to characterize inocula used for biodegradation tests. KEY POINTS: • Microbial toxicity tests standardized by ISO and OECD have large differences in sensitivity and applicability. • Standardized microbial toxicity tests in combination with biodegradability tests open a new way to characterize inocula for biodegradation tests. • Standardized microbial toxicity tests together with ecotoxicity tests can form a very effective toolbox for the characterization of toxic effects of chemicals.

Inhalation Toxicity Screening of Consumer Products Chemicals using OECD Test Guideline Data-based Machine Learning Models.

This study aimed to screen the inhalation toxicity of chemicals found in consumer products such as air fresheners, fragrances, and anti-fogging agents submitted to K-REACH using machine learning models. We manually curated inhalation toxicity data based on OECD test guideline 403 (Acute inhalation), 412 (Sub-acute inhalation), and 413 (Sub-chronic inhalation) for 1709 chemicals from the OECD eChemPortal database. Machine learning models were trained using ten algorithms, along with four molecular fingerprints (MACCS, Morgan, Topo, RDKit) and molecular descriptors, achieving F1 scores ranging from 51 % to 91 % in test dataset. Leveraging the high-performing models, we conducted a virtual screening of chemicals, initially applying them to data-rich chemicals generally used in occupational settings to determine the prediction uncertainty. Results showed high sensitivity (75 %) but low specificity (23 %), suggesting that our models can contribute to conservative screening of chemicals. Subsequently, we applied the models to consumer product chemicals, identifying 79 as of high concern. Most of the prioritized chemicals lacked GHS classifications related to inhalation toxicity, even though they were predicted to be used in many consumer products. This study highlights a potential regulatory blind spot concerning the inhalation risk of consumer product chemicals while also indicating the potential of artificial intelligence (AI) models to aid in prioritizing chemicals at the screening level.

Collaborative study for the characterisation of the BINACLE Assay for in vitro detection of tetanus toxicity in toxoids - Part 1.

For several decades the European Pharmacopoeia monographs Tetanus vaccine (adsorbed) (0452) and Tetanus vaccine for veterinary use (0697) required that Specific toxicity and Absence of toxin and irreversibility of the toxoidof each bulk of tetanus toxoids had to be tested by an in vivo toxicity test in guinea pigs before it could be included in vaccines for human or veterinary use. In line with the 3Rs concept of replacing, reducing and refining animal experiments, an in vitro method for the detection of active tetanus neurotoxin (TeNT) has been developed at the Paul-Ehrlich-Institut (PEI, Germany). This method, the so-called BINACLE (binding and cleavage) assay, uses the receptor-binding and proteolytic properties of TeNT for the specific detection of active toxin molecules. Successful in-house validation studies as well as a small-scale transferability study had demonstrated that this method may represent a suitable alternative to the compendial in vivo toxicity test. As a follow up, an international collaborative study aimed at verifying the suitability of the BINACLE assay as a potential alternative to the guinea pig toxicity test for tetanus toxoids was organised by the European Directorate for the Quality of Medicines & HealthCare (EDQM) under the aegis of its Biological Standardisation Programme (BSP). Within the framework of this study, coded BSP136, a feasibility phase - also referred to as Phase 1 - was run to select and qualify critical study reagents and samples and to assess the performance of the BINACLE Standard Operating Procedure developed by the project leaders. Then the international collaborative study aimed at evaluating the BINACLE, referred to as BSP136 Phase 2, was started. A total of 19 international laboratories (comprising vaccine manufacturers as well as national control laboratories) were supplied with a detailed assay protocol, critical reagents required for the assay, three samples consisting of three different bulk tetanus toxoids donated by major European vaccine manufacturers and one international standard toxoid. Each of the participants was asked to perform three independent BINACLE assays following the provided protocol. The statistical analysis of the results showed that most of the participating laboratories were able to perform the BINACLE assay according to the provided protocol. However, the results obtained by the participants varied widely, and not all the laboratories were able to achieve a sensitive detection of active TeNT. Multiple factors may have contributed to the elevated variability of the BSP136 study results. From an analysis of these factors, strategies were developed to help increase the standardisation of the BINACLE assay and obtain more consistent results in a follow-up validation study, BSP 136 Phase 3 (Part 2), for which the experimental phase took place in 2023. The present manuscript summarises the outcome of Phases 1 and 2, which constitute Part 1 of the BSP136 project.

Validation of a new protocol for a zebrafish MEFL (malformation or embryo-fetal lethality) test method that conforms to the ICH S5 (R3) guideline.

Detecting the toxic effects of chemicals on reproduction and development without using mammalian animal models is crucial in the exploitation of pharmaceuticals for human use. Zebrafish are a promising animal model for investigating pharmacological effects and toxicity during vertebrate development. Several studies have suggested the use of zebrafish embryos for the assessment of malformations or embryo-fetal lethality (MEFL). However, a reproducible protocol as a standard for the zebrafish MEFL test method that fulfills global requests has not been established based on the International Council of Harmonisation (ICH) S5 (R3) guidelines. To establish such a toxicity test method, we developed a new and easy protocol to detect MEFL caused by chemicals, especially those with teratogenic potential, using fertilized zebrafish eggs (embryos) within 5 days of development. Our toxicity test trials using the same protocol in two to four different laboratories corroborated the high inter-laboratory reproducibility. Our test method enabled the detection of 18 out of 22 test compounds that induced rat MEFL. Thus, the prediction rate of our zebrafish test method for MEFL was almost 82% compared with that of rat MEFL. Collectively, our study proposes the establishment of an easy and reproducible protocol for the zebrafish MEFL test method for reproductive and developmental toxicity that meets ICH guideline S5 (R3), which can be further considered in combination with information from other sources for regulatory use.

Contaminant levels versus toxicity bioassays in ecological risk assessment of sediments from the southern Baltic Sea.

Surface sediments collected in 2021 from six locations in the southern Baltic Sea (Polish district) were examined by chemical and toxicological methods. Chemical analyses included polybrominated diphenyl ethers (PBDEs), polycyclic aromatic hydrocarbons (PAHs), and their alkylated derivatives, butyltin compounds and 16 major and trace elements. The toxicity was measured using Ostracodtoxkit F and Microtox. The ecological risk of sediment was estimated by hazard quotient (HQ) calculation. Some PAHs, alkylated PAHs and metals (Zn, Hg, Cd and As) could pose a moderate risk in the sediments from the Gdansk Deep and in the vicinity of the wrecks, but the risk resulting from the presence of all analyzed compounds was considered high for these sediments. In studies using biotests, sediments from the vicinity of the t/s Franken wreck and the Slupsk Furrow were highly toxic to test organisms. Ostracodtoxkit F, compared to Microtox, appeared a more sensitive test for measured compounds.

Progression from in vivo validation to in vitro screening in hazard assessment for leukoderma-inducible chemicals.

Chemicals are representative environmental factors that affect human health. Recently, external exposure to a chemical of rhododenol (RD) caused chemical leukoderma, an acquired patchy hypopigmentation, in about 20,000 Asian people. The development of a hazard assessment system for accurate determination of leukoderma-inducible chemicals is required for the prevention of such tragedies. Case studies in humans have shown 6 chemicals, including RD, with a constitutive leukoderma-inducible potency and 3 chemicals with a photosensitive but not a constitutive leukoderma-inducible potency. In this study, the 6 positive and 3 negative control chemicals with or without constitutive leukoderma-inducible potencies were investigated by our previously developed in vivo hazard assessment system using tail skin of mice. Based on the results of validation, this study aimed to develop an in vitro hazard assessment system to correctly determine chemicals with a constitutive leukoderma-inducible potency. As expected, external exposure to the 6 positive control chemicals, but not external exposure to the 3 negative control chemicals, resulted in development of constitutive leukoderma in mouse tail skin with a decreased level of skin melanin and decreased number of melanocytes. Moreover, the 6 positive and 3 negative control chemicals were correctly distinguished by the presence or absence of endoplasmic reticulum (ER) stress induction, but not by tyrosinase-dependent cell death or production of reactive oxygen species (ROS), in immortalized normal melanocytes. The hazard assessment system using tail skin could be a solid in vivo tool to reliably determine the chemical potency of a chemical for constitutive leukoderma induction. The hazard assessment system focusing on ER stress induction in normal melanocytes might be a novel and convenient in vitro tool for accurately evaluating chemicals with leukoderma-inducible potencies. Thus, this study contributed to environmentology through the development of a screening system for preventing an environmental factor-related disease.

Assessment of performance of the profilers provided in the OECD QSAR toolbox for category formation of chemicals.

Growing restrictions and bans on animal testing for chemical safety assessment under different regulations have led to an increasing use of alternative methods. Read-across is one of the major approaches used for this purpose, which relies on the identification of toxicological hazards of a data-poor or untested (target) chemical from data on other already-tested (source) similar chemicals. This requires the target substance to be first assigned to a group or category of 'similar' chemicals. The 'similarity' may be in terms of structural features alone, or in combination with certain rules that are based on mechanistic and/or toxicological aspects. In this regard, the OECD QSAR toolbox-a major free-access in silico platform-is widely used to derive toxicity predictions for a range of (eco) toxicological endpoints. The Toolbox allows the user to identify a set of similar chemicals (analogues) by computational 'profilers' that incorporate different structural alerts, or a combination of structural alerts and physicochemical and/or toxicokinetic rules relevant to a specific toxicological endpoint. The overall aim of this study was to assess the performance of the in silico profilers provided in the OECD QSAR Toolbox for reliability for identifying chemical analogues for category formation in a number of high-quality databases on mutagenicity, carcinogenicity, and skin sensitisation. The study also aimed to identify the reasons for any limitations in the performance of the profilers, and propose ways to improve their overall accuracy. The results showed that whilst some structural alerts are fit-for-purpose as such within the acceptable limits, others need refinement or a consideration for their possible exclusion from the profiler. Such refinements are imperative for a reliable use of the profilers in read-across and grouping/categorisation for classification, labelling and risk assessment of chemicals.

New approach methodologies to confirm developmental toxicity of pharmaceuticals based on weight of evidence.

The aim of embryo-fetal developmental toxicity assessments for pharmaceuticals is to inform potential risk of adverse pregnancy outcome, which has traditionally relied on studies in pregnant animals. Recent updates to international safety guidelines (ICH S5R3) have incorporated information on how to use weight of evidence and alternative assays to reduce animal use while still informing risk of fetal harm. Uptake of these alternative approaches has been slow due to limitations in understanding how alternative assays translate to in vivo effects and then relevance to human exposure. To understand the predictivity of new approach methodologies for developmental toxicity (DevTox NAMs), we used two pharmaceutical examples (glasdegib and lorlatinib) to illustrate the value of DevTox NAMs to complement weight of evidence (WoE) assessments while considering the relationship of concentration-effect levels in NAMs to in vivo studies. The in vitro results generated in a battery of assays (mEST, rWEC, zebrafish, and human based stem cells) confirmed the WoE based on literature and further confirmed by preliminary embryo-fetal development data. The data generated for these two compounds supports integrating DevTox NAMs into the developmental toxicity assessment for advanced cancer indications.

A novel "cells-on-particles" cytotoxicity testing platform in vitro: design, characterization, and validation against engineered nanoparticle aerosol.

The presented research introduces the "Cells-on-Particles" integrated aerosol sampling and cytotoxicity testing in vitro platform, which allows for the direct assessment of the biological effects of captured aerosol particles on a selected cell type without the need for extraction or resuspension steps. By utilizing particles with unaltered chemical and physical properties, the method enables simple and fast screening of biological effects on specific cell types, making it a promising tool for assessing the cytotoxicity of particulate matter in ambient and occupational air. Platforms fabricated from cellulose acetate (CA) and poly[ε]caprolactone (PCL) were proven to be biocompatible and promoted the attachment and growth of the human bronchial epithelial cell line BEAS-2B. The PCL platforms were exposed to simulated occupational aerosols of silver, copper, and graphene oxide nanoparticles. Each nanoparticle type exhibited different and dose-dependent cytotoxic effects on cells, evidenced by reduced cell viability and distinct, particle type-dependent gene expression patterns. Notably, copper nanoparticles were identified as the most cytotoxic, and graphene oxide the least. Comparing the "Cells-on-Particles" and submerged exposure ("Particles-on-Cells") testing strategies, BEAS-2B cells responded to selected nanoparticles in a comparable manner, suggesting the developed testing system could be proposed for further evaluation with more complex environmental aerosols. Despite limitations, including particle agglomeration and the need for more replicates to address variability, the "Cells-on-Particles" platform enables effective detection of toxicity induced by relatively low levels of nanoparticles, demonstrating good sensitivity and a relatively simpler procedure compared to standard 2D cell exposure methods.

Development of Sensitive In Vitro Protocols for the Biocompatibility Testing of Medical Devices and Pharmaceuticals Intended for Contact with the Eyes: Acute Irritation and Phototoxicity Assessment.

This study introduces a novel in vitro methodology that employs the 3-D reconstructed tissue model, EpiOcular, to assess the irritation and phototoxicity potential of medical devices and drugs in contact with the eye. Our study evaluated diverse test materials, including medical devices, ophthalmological solutions and an experimental drug (cemtirestat), for their potential to cause eye irritation and phototoxicity. The protocols used in this study with the EpiOcular tissue model were akin to those used in the ultra-mildness testing of cosmetic formulations, which is challenging to predict with standard in vivo rabbit tests. To design these protocols, we leveraged experience gained from the validation project on the EpiDerm skin irritation test for medical devices (ISO 10993-23:2021) and the OECD TG 498 method for photo-irritation testing. The predictions were based on the tissue viability and inflammatory response, as determined by IL-1α release. By developing and evaluating these protocols for medical devices, we aimed to expand the applicability domain of the tests referred to in ISO 10993-23. This will contribute to the standardisation and cost-effective safety evaluation of ophthalmic products, while reducing reliance on animal testing in this field. The findings obtained from the EpiOcular model in the photo-irritation test could support its implementation in the testing strategies outlined in OECD TG 498.