Injury Risk Estimation in Mandible-Related Surgical Procedures: A CBCT Study Based on Vital Interforaminal Anatomical Structures.

The mandibular interforaminal region has been considered safe for surgical procedures; nevertheless, the risk of injury to neurovascular structures, such as the mental foramen (MF) and its related structures (anterior loop [AL] and lingual foramina [LF]) should not be overlooked. The study aimed to evaluate the relative risk of injury to these structures during surgical procedures in the anterior region of the mandible based on cone-beam computed tomography (CBCT) scans. A retrospective cross-sectional and observational study was performed on 250 CBCTs from adults (18-69 years) with dentate jaws. Linear measurements of the MF, AL, and LF were evaluated to estimate the risk of injury to these structures during chin-related surgical procedures. The most frequent distance between the base of the mandible (BM) and MF was 8 mm (30.2%). In addition, 20.4% of the CTs had 6 mm from the vestibular cortical bone to the LF. The commonly found measurement from LF to the apex of the nearest tooth was 7 mm (24.0%); 64.2% of the CTs showed a 2-mm distance between the most distal point of the dental implant site to the most anterior point of the AL. Safety distances for genioplasty techniques (MF to mandible base > 6 mm, 96.6% [CI 95%, 95.0%-98.2%]) were observed. Considering the 5-mm cut-off point between the lower limit of a hypothetical bone graft and the chin, 65.4% (CI 95%, 58.9%-71.9%) of CTs were within this distance. Regarding the safety margin of 8 mm, 85.6% (CI 95%, 80.8%-90.4%) were up to this value. This study found safety margins for genioplasty and chin bone grafting surgical techniques that adopt a 5-mm cut-off point. Further similar studies assessing other surgical methods and employing larger samples from different geographical origins may contribute to this field of investigation.

Identification of the Incisive Branch of the Inferior Alveolar Nerve of Edentulous Mandibles Using Cone-Beam Computerized Tomography.

This study explored the average length of the incisive branch (IB) of the inferior alveolar nerve on cone-beam computerized tomography (CBCT) with regard to patient demographics in patients with edentulous mandibles. CBCT was used in a retrospective study of edentulous mandibles to assess the presence and anatomical variation for the IB. Three independent observers measured bilateral IB lengths. In addition to demographics, IB length and port of exit data were obtained. A 1-way analysis of variance was used to test whether IB length varied by sex or port of exit, and a standard Pearson correlation was used to test for IB length and age significance, with a significance level of P < .05. Intraclass correlation coefficients showed significant agreement in IB length across all observers. No significant difference was noted between the exit port and IB length. An important effect was reported for sex, indicating women have generally shorter IB lengths (9.43 ± 3.99 vs 10.55 ± 3.92). There was a significant correlation with age, but the relationship was weak. Edentulous mandibles have an altered anatomic landscape, and establishing predictive IB dimensions aids practitioners in surgical planning.

Influence of tube current and metal artifact reduction on the diagnosis of external cervical resorption in teeth adjacent to a dental implant in CBCT: an ex-vivo study.

OBJECTIVES: This ex-vivo study aimed to assess the influence of tube current (mA) and metal artifact reduction (MAR) on the diagnosis of early external cervical resorption (EECR) in cone-beam computed tomography (CBCT) in the presence of an adjacent dental implant. MATERIALS AND METHODS: Twenty-three single-rooted teeth were sectioned longitudinally and EECR was induced using a spherical drill and 5% nitric acid in 10 teeth. Each tooth was positioned in the socket of the lower right canine of a dry human mandible and CBCT scans were acquired using 90 kVp, voxel of 0.085 mm, field of view of 5 x 5 cm, and varying tube current (4, 8 or 12 mA), MAR (enabled or disabled) and implant conditions (with a zirconia implant in the socket of the lower right first premolar or without). Five oral radiologists evaluated the presence of EECR in a 5-point scale and the diagnostic values (area under the receiver operating characteristic curve - AUC, sensitivity, and specificity) were compared using multi-way Analysis of Variance (α = 0.05). Kappa test assessed intra-/inter-evaluator agreement. RESULTS: The tube current only influenced the AUC values in the presence of the implant and when MAR disabled; in this case, 8 mA showed lower values (p<0.007). MAR did not influence the diagnostic values (p>0.05). In general, the presence of an implant reduced the AUC values (p<0.0001); sensitivity values with 8 mA and MAR disabled, and specificity values with 4 mA and MAR enabled and 8 mA regardless MAR were also decreased (p<0.0001). CONCLUSIONS: Variations in tube current and MAR were unable to improve EECR detection, which was impaired by the presence of an adjacent implant. CLINICAL RELEVANCE: Increasing tube current or activating MAR tool does not improve EECR diagnosis, which is hampered by the artifacts generated by dental implants.

Volumetric evaluation of osteotomy gap following mandibular bilateral sagittal split osteotomy using a novel semi-automated approach: a pilot study.

OBJECTIVES: To establish an analysis pipeline for the volumetric evaluation of the osteotomy site after bilateral sagittal split osteotomy (BSSO). PATIENTS AND METHODS: Cone-beam computed tomography (CBCT) was performed before, directly after BSSO, and 6-12 months after surgery. Image segmentations of each osteotomy gap data set were performed manually by four physicians and were compared to a semi-automatic segmentation approach. RESULTS: Five patients with a total of ten osteotomy gaps were included. The mean interclass correlation coefficient (ICC) of individual patients was 0.782 and the standard deviation 0.080 when using the manual segmentation approach. However, the mean ICC of the evaluation of anatomical sites and time points separately was 0.214, suggesting a large range of deviation within the manual segmentation of each rater. The standard deviation was 0.355, further highlighting the extent of the variation. In contrast, the semi-automatic approach had a mean ICC of 0.491 and a standard deviation of 0.365, which suggests a relatively higher agreement among the operators compared to the manual segmentation approach. Furthermore, the volume of the osteotomy gap in the semi-automatic approach showed the same tendency in every site as the manual segmentation approach, but with less deviation. CONCLUSION: The semi-automatic approach developed in the present study proved to be valid as a standardised method with high repeatability. Such image analysis methods could help to quantify the progression of bone healing after BSSO and beyond, eventually facilitating the earlier identification of patients with retarded healing.

Panoramic Radiography in the Evaluation of the Relationship of Maxillary Molar Teeth and Maxillary Sinuses on the Deep Learning Models Improved with the Findings Obtained by Cone Beam Computed Tomography.

BACKGROUND: Panoramic radiography (PR) is available to determine the contact relationship between maxillary molar teeth (MMT) and the maxillary sinus floor (MSF). However, as PRs do not provide clear and detailed anatomical information, advanced imaging methods can be used. AIM: The aim of this study was to evaluate the diagnostic performance of deep learning (DL) applications that assess the relationship of the MSF to the first maxillary molar teeth (fMMT) and second maxillary molar teeth (sMMT) on PRs with data confirmed by cone beam computed tomography (CBCT). METHODS: A total of 2162 fMMT and sMMT were included in this retrospective study. The contact relationship of teeth with MSF was compared among DL methods. RESULTS: DL methods, such as GoogLeNet, VGG16, VGG19, DarkNet19, and DarkNet53, were used to evaluate the contact relationship between MMT and MSF, and 85.89% accuracy was achieved by majority voting. In addition, 88.72%, 81.19%, 89.39%, and 83.14% accuracy rates were obtained in right fMMT, right sMMT, left fMMT, and left sMMT, respectively. CONCLUSION: DL models showed high accuracy values in detecting the relationship of fMMT and sMMT with MSF.

The Frequency of Occipital Spurs in Relation to the Cephalic Index: An Anatomorphometric Cone Beam CT Study.

BACKGROUND: The occipital spur (OS) can be described as an abnormal elongation of the external occipital protuberance (EOP). The cephalic index (CI) refers to the ratio of width to length in any skull. AIM: The aim of the present study was to evaluate the frequency and types of OS. It also aimed to determine the mean CI and the distribution of skull types using cone beam computed tomography (CBCT). And to determine if there was a relationship between the cephalic index and the presence and types of OS. METHODS: CBCT scans from 523 patients were included in the study. OSs were classified as type 1 (flat), type 2 (crest), and type 3 (spine). Skull length and width were measured on axial sections and the CI was calculated. Based on the cephalic index (CI), skull types were classified as dolichocephalic (CI < 75), mesocephalic (75 < CI < 80), brachycephalic (80 < CI < 85), and hyperbrachycephalic (CI > 85). RESULTS: The most common cranial types in the study group were brachycephalic (44.7%), mesocephalic (28.3%), hyperbrachycephalic (21.2%), and dolichocephalic (5.7%). Regarding the presence of OS, 54.3% of the participants had no OS, 23.1% had flat type, 15.3% had crest type, and 7.2% had spin type OS. There was a statistically significant difference (P < 0.05) in the frequency of OS according to skull type. CONCLUSION: This study, the first to evaluate CI and OS using CBCT, concludes that brachycephaly is the most common cranial type. OS is more common in mesocephalic and dolichocephalic skulls, at older ages, and in males.

Evaluation of temporomandibular joint morphology and morphometry in male osteoporotic patients using advanced imaging and biochemical markers: A cross-sectional study.

Osteoporosis is a condition with reduced bone mass and disrupted architecture. Osteoporosis affects the Temporomandibular disorders (TMD) by changing bone density and quality. This study aims to determine the nature and extent of temporomandibular joint (TMJ) involvement in osteoporotic patients by correlating TMJ morphological changes detected by CBCT with systemic bone health indicated by BMD T-scores from DEXA and analyzing BTMs in serum and saliva. This study was a cross-sectional study conducted from May 2021 to December 2022. It involved 50 participants divided into two groups (N=25). One group was healthy male, while the other group had osteoporosis male. Saliva and blood samples were collected, and diagnostic imaging was conducted. The prevalence of various bone changes in the condyle was examined using CBCT. Erosion was found to be the most common, followed by Flattening, Osteophyte, and Subchondral cysts. The study group had significantly higher rates of smooth condyle, erosive lesions, and osteophytes compared to the control group. Pseudocyst decreased on the right side but increased on the left side. Pain on the right side increased more in the study group, and the T score for osteoporosis was higher in the study group. Joint spaces, condyle diameter, and glenoid cavity measurements differed significantly between sick and healthy people, as shown by CBCT (P≤0.001). Only the ALP parameter in the serum showed a significant increase in the study group compared to the control group. Saliva analysis revealed higher levels of calcium, osteocalcin, and ALP in the case group compared to the control group. The results of this study showed that CBCT as a specialized technique in imaging by providing detailed images can be used to evaluate osteoporosis and be used as an accurate diagnostic tool.

Systematic review and meta-analysis of root morphology and canal configuration of permanent premolars using cone-beam computed tomography.

INTRODUCTION: The efficacy of root canal treatment is greatly impacted by a thorough understanding of root canal anatomy. This systematic review and meta-analysis aim to thoroughly investigate the root morphology and canal configuration (RMCC) of permanent premolars (PMs). METHODOLOGY: A comprehensive analysis was conducted following the PRISMA guidelines. Literature exploration was carried out across four electronic databases (PubMed, Embase, Cochrane, and Web of Science). The risk of bias assessment was conducted for the included studies utilizing the Anatomical Quality Assessment (AQUA) tool. Data analysis was performed utilizing SPSS and RevMAN5.3.3. The meta-analysis was applied with a 95% confidence interval to calculate odds ratios (OR). RESULTS: Among the 82 selected studies, 59 studies exhibited potential bias in domain one (objective(s) and subject characteristics), followed by domain three (methodology characterization). The majority of maxillary PM1s had either single root (46.7%) or double roots (51.9%), while three-rooted variants were uncommon (1.4%). Conversely, most other PMs exhibited a single root. In terms of canal configuration, maxillary PM1s predominantly featured double distinct canals (87.2%), with the majority of maxillary PM2s displaying either a single canal (51.4%) or double canals (48.3%). Mandibular PMs were primarily characterized by single canals, accounting for 78.3% of mandibular PM1s and 90.3% of mandibular PM2s. Subgroup analyses revealed higher incidences of single-rooted and single-canalled PMs among Asians compared to Caucasians. Additionally, women exhibited a higher incidence of single-rooted PMs, while men showed a greater frequency of double-rooted PMs. CONCLUSIONS: The comprehensive analysis indicated that maxillary PM1s predominantly possess double roots and double canals, whereas maxillary PM2s and mandibular PMs were primarily characterized by single-rooted with a single canal. Notably, single root and single canal were more prevalent among women and Asian samples.

Fine structural human phantom in dentistry and instance tooth segmentation.

In this study, we present the development of a fine structural human phantom designed specifically for applications in dentistry. This research focused on assessing the viability of applying medical computer vision techniques to the task of segmenting individual teeth within a phantom. Using a virtual cone-beam computed tomography (CBCT) system, we generated over 170,000 training datasets. These datasets were produced by varying the elemental densities and tooth sizes within the human phantom, as well as varying the X-ray spectrum, noise intensity, and projection cutoff intensity in the virtual CBCT system. The deep-learning (DL) based tooth segmentation model was trained using the generated datasets. The results demonstrate an agreement with manual contouring when applied to clinical CBCT data. Specifically, the Dice similarity coefficient exceeded 0.87, indicating the robust performance of the developed segmentation model even when virtual imaging was used. The present results show the practical utility of virtual imaging techniques in dentistry and highlight the potential of medical computer vision for enhancing precision and efficiency in dental imaging processes.

Adolescents and Children Age Estimation Using Machine Learning Based on Pulp and Tooth Volumes on CBCT Images.

OBJECTIVES: To estimate adolescents and children age using stepwise regression and machine learning methods based on the pulp and tooth volumes of the left maxillary central incisor and cuspid on cone beam computed tomography (CBCT) images, and to compare and analyze the estimation results. METHODS: A total of 498 Shanghai Han adolescents and children CBCT images of the oral and maxillofacial regions were collected. The pulp and tooth volumes of the left maxillary central incisor and cuspid were measured and calculated. Three machine learning algorithms (K-nearest neighbor, ridge regression, and decision tree) and stepwise regression were used to establish four age estimation models. The coefficient of determination, mean error, root mean square error, mean square error and mean absolute error were computed and compared. A correlation heatmap was drawn to visualize and the monotonic relationship between parameters was visually analyzed. RESULTS: The K-nearest neighbor model (R2=0.779) and the ridge regression model (R2=0.729) outperformed stepwise regression (R2=0.617), while the decision tree model (R2=0.494) showed poor fitting. The correlation heatmap demonstrated a monotonically negative correlation between age and the parameters including pulp volume, the ratio of pulp volume to hard tissue volume, and the ratio of pulp volume to tooth volume. CONCLUSIONS: Pulp volume and pulp volume proportion are closely related to age. The application of CBCT-based machine learning methods can provide more accurate age estimation results, which lays a foundation for further CBCT-based deep learning dental age estimation research.

Fully automatic AI segmentation of oral surgery-related tissues based on cone beam computed tomography images.

Accurate segmentation of oral surgery-related tissues from cone beam computed tomography (CBCT) images can significantly accelerate treatment planning and improve surgical accuracy. In this paper, we propose a fully automated tissue segmentation system for dental implant surgery. Specifically, we propose an image preprocessing method based on data distribution histograms, which can adaptively process CBCT images with different parameters. Based on this, we use the bone segmentation network to obtain the segmentation results of alveolar bone, teeth, and maxillary sinus. We use the tooth and mandibular regions as the ROI regions of tooth segmentation and mandibular nerve tube segmentation to achieve the corresponding tasks. The tooth segmentation results can obtain the order information of the dentition. The corresponding experimental results show that our method can achieve higher segmentation accuracy and efficiency compared to existing methods. Its average Dice scores on the tooth, alveolar bone, maxillary sinus, and mandibular canal segmentation tasks were 96.5%, 95.4%, 93.6%, and 94.8%, respectively. These results demonstrate that it can accelerate the development of digital dentistry.

A randomized controlled clinical trial of concentrated growth factor combined with sodium hyaluronate in the treatment of temporomandibular joint osteoarthritis.

OBJECTIVE: To investigate the effect of concentrated growth factor (CGF) combined with sodium hyaluronate (SH) on temporomandibular joint osteoarthritis (TMJOA). METHODS: Sixty patients with TMJOA who were diagnosed by cone-beam computed tomography (CBCT) between March 2020 and March 2023 at the Stomatological Hospital of Xi'an Jiaotong University were randomly divided into a control group (n = 30) and an experimental group (n = 30). The patients in the experimental group were treated with CGF + SH, and those in the control group were treated with SH only. The visual analogue scale (VAS) score indicating pain in the temporomandibular joint (TMJ) area; the Helkimo Clinical Dysfunction Index (Di); and changes in condylar CBCT at the first visit and 2 weeks, 3 months and 6 months after treatment were recorded. The CBCT data of the patients in the experimental and control groups were collected, and the three-dimensional CBCT image sequences were imported into Mimics Medical 19.0 software in DICOM format for condylar reconstruction. RESULTS: The VAS scores at 2 weeks, 3 months and 6 months after treatment were significantly lower in the experimental group than in the control group (P < 0.05), and the pain in the experimental group was significantly relieved. The Di was significantly lower in the experimental group than in the control group (P < 0.05), and the clinical function of the TMJ improved. After treatment, the CBCT score was significantly lower in the experimental group than in the control group (P < 0.05), and the condylar bone cortex was obviously repaired. Observation of the condylar bone cortex by three-dimensional reconstruction showed the same results as those obtained by CBCT. CONCLUSION: CGF combined with SH is effective in the treatment of TMJOA and can improve muscle pain, TMJ pain, Impaired TMJ function, Impaired range of movement, Pain on movement of the mandible and promote bone repair. THE REGISTRATION NUMBER (TRN): ChiCTR2400082712. THE DATE OF REGISTRATION: April 5, 2024.

Therapeutic solutions for discoloration of calcified teeth based on CBCT diagnosis.

Single tooth orange discoloration secondary to root canal calcification occurs as a consequence of dental trauma, orthodontic treatment, or for unknown rea- sons. A correct case history must be compiled and a CBCT study carried out in order to establish the diag- nosis and define the best treatment plan in each case. The aim of the present study was to offer a therapeutic protocol involving a clinical decision-making tree dia- gram based on the presence or absence of apical dis- ease and the degree of canal calcification. Dental bleaching and the use of ceramic veneers allow es- thetic restoration in such cases.

Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study.

BACKGROUND: In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations. METHODS: From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology. RESULTS: The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars. CONCLUSION: This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

The comparison of visibility of the maxillary sinus septa between cone-beam computed tomography scans and panoramic radiograph images as dependent on the cortical bone thickness: a retrospective comparative study.

PURPOSE: To analyze the visibility of the maxillary sinus septa (MSS) in panoramic radiography (PR) versus cone beam computed tomography (CBCT) and to investigate whether the buccal cortical bone thickness (BT) or the septa dimensions influence their visibility. METHODS: Corresponding PR and CBCT images of 355 patients were selected and examined for MSS visibility. The septa dimensions (width, height, depth) and the BT were measured. Results were analysed statistically. RESULTS: Comparing the corresponding regions on CBCT and PR, 170 MSS were identified; however, only 106 of these were also visible using PR. The MSS visibility was significantly higher on CBCT versus PR images (P1: p = 0.039, P2: p = 0.015, M1: p = 0.041, M2: p = 0.017, M3: p = 0.000), except region C (p = 0.625). Regarding the measurements of MSS dimensions, only the height in region M1 (p = 0.013) and the width in region P2 (p = 0.034) were significantly more visible on CBCT. The BT in the area of the MSS was found to have a marginal influence on its visibility on the PR images only in regions M3 and M1 (M3: p = 0.043, M1: p = 0.047). In terms of MSS visibility based on the dimensions, significance was found for all three influencing variables only in region P2 (width; p = 0.041, height; p = 0.001, depth; p = 0.007). There were only isolated cases of further significance: M3 for width (p = 0.043), M2 for height (p = 0.024), and P1 for depth (p = 0.034), no further significance was noted. CONCLUSION: MSS visibility appears significantly higher on CBCT versus PR images. It is concluded that the septa dimensions and BT can influence MSS visibility on PR images just in certain regions.

Evaluation of calcium hydroxide root canal filling materials by cone beam computed tomography and three-dimensional modeling.

AIM: The aim of this study was to compare the effectiveness of filling pastes in resin prototype primary molars by cone beam computed tomography (CBCT) and 3D modeling.

The influence of immediate intraoperative loading with a splinting component on supporting tissues during a one-stage implant.

OBJECTIVE: Aim: To study the specifics of the impact of immediate intraoperative loading with a splinting component on supporting tissues during a one-stage implantation protocol. PATIENTS AND METHODS: Materials and Methods: In the course of the study, orthopedic treatment was carried out for 55 patients aged 29 to 60 years. The following were performed: cone-beam computed tomography, software planning and intraoral scanning with an optical scanner, one-stage implantation protocol, assessment of implant stability with the Osstell ISQ device, microcirculation study in the peri-implant area using laser Doppler flowmetry (LDF). RESULTS: Results: It was established that around loaded implants there is an increase in blood flow and vasomotor activity of the microcirculatory channel of the supporting tissues, an increase in the volume of bone tissue and an increase in torque, which is the optimal forecast for the acceleration of the pace of osseointegration. CONCLUSION: Conclusions: The use of a splinting component during immediate intraoperative functional masticatory load accelerates the dynamics of bone tissue remodeling processes around the implant, which is an optimal prediction of osseointegration rates in various dental implantation protocols and is consistent with high values of the implant stability coefficient.

Patient-specific beta-tricalcium phosphate scaffold for customized alveolar ridge augmentation: a case report : Case Report: patient-specific ß-TCP scaffold for alveolar ridge CBR.

BACKGROUND: Beta-tricalcium phosphate (ß-TCP) is a biocompatible ceramic material widely used in the field of oral regeneration. Due to its excellent biological and mechanical properties, it is increasingly utilized for alveolar ridge augmentation or guided bone regeneration (GBR). With recent advances in computer-aided design and manufacturing (CAD/CAM), ß-TCP can now be used in the form of digitally designed patient-specific scaffolds for customized bone regeneration (CBR) of advanced defects in a two-stage implant therapy concept. In this case report following the CARE case report guidelines, we present a novel application of a patient-specific ß-TCP scaffold in pre-implant mandibular alveolar ridge augmentation. CASE PRESENTATION: A 63-year-old female patient with significant horizontal bone loss in the posterior mandible was treated with a custom ß-TCP scaffold in the context of a two-stage backward-planned implant therapy. Cone-beam computed tomography nine months after augmentation showed successful integration of the scaffold into the surrounding bone, allowing implant placement. Follow-up until two years after initial surgery showed excellent oral and peri-implant health. CONCLUSIONS: This case highlights the potential of patient-specific ß-TCP scaffolds for alveolar ridge augmentation and their advantage over traditional techniques, including avoidance of xeno-, allo-, and autografts. The results provide encouraging evidence for their use in clinical practice. Patient-specific ß-TCP scaffolds may be a promising alternative for clinicians seeking to provide their patients with safe, predictable, and effective alveolar ridge augmentation results in customized bone regeneration procedures.

Detection of multidrug-resistant bacteria in the nasal cavities and evaluation of sinus disorders in patients undergoing Le Fort I osteotomy.

INTRODUCTION: Orthognathic surgery can lead to sinus alterations, including sinusitis, attributed to the exposure of maxillary sinuses during Le Fort I osteotomy. Furthermore, being a hospital-based procedure, there is potential risk of complications arising from bacteria prevalent in such environments. This study evaluated maxillary sinusitis occurrence and the presence of multidrug-resistant bacteria in the nasal cavity before and after orthognathic surgery. METHODS: Ten patients with dentofacial deformities underwent Le Fort I osteotomy. Clinical evaluations using SNOT-22 questionnaire were performed, and nasal cavity samples were collected pre-surgery and 3-6 months post-surgery to quantify total mesophilic bacteria and detect Staphylococcus aureus, Acinetobacter baumannii, and Klebsiella pneumoniae. Cone Beam Computed Tomography (CBCT) was performed pre- and post-operatively, and the results were evaluated using the Lund-Mackay system. This study was registered and approved by the Research Ethics Committee of PUCRS (No. 4.683.066). RESULTS: The evaluation of SNOT-22 revealed that five patients showed an improvement in symptoms, while two remained in the same range of interpretation. One patient developed post-operative maxillary sinusitis, which was not detected at the time of evaluation by SNOT-22 or CBCT. CBCT showed a worsening sinus condition in three patients, two of whom had a significant increase in total bacteria count in their nasal cavities. The Brodsky scale was used to assess hypertrophy in palatine tonsils, where 60% of the subjects had grade 1 tonsils, 20% had grade 2 and 20% had grade 3. None of the patients had grade 4 tonsils, which would indicate more than 75% obstruction. Two patients harboured S. aureus and K. pneumoniae in their nasal cavities. Notably, K. pneumoniae, which was multidrug-resistant, was present in the nasal cavity of patients even before surgery, but this did not result in maxillary sinusitis, likely due to the patients' young and healthy condition. CONCLUSION: There was an improvement in signs and symptoms of maxillary sinusitis and quality of life in most patients after orthognathic surgery. However, some patients may still harbour multidrug-resistant bacteria, even if they are asymptomatic. Therefore, a thorough pre-operative assessment is essential to avoid difficult-to-treat post-operative complications.

A study on volumetric change of mandibular condyles with osteoarthritis using cone-beam computed tomography.

This study aimed to quantitatively assess three-dimensional changes in the mandibular condyle with osteoarthritis using cone-beam computed tomography (CBCT). Pre- and post-treatment CBCT images of temporomandibular joints (TMJs) from 66 patients were used to assess longitudinal changes in condylar volume within individual patients using 3D slicer software. Total volume difference (dV), net increase (dV + , bone deposition), and net decrease (dV- , bone resorption) after treatment were analyzed based on clinical and radiological factors. Condyles with surface erosion at their first visit showed significantly decreased volume after treatment compared to condyles without erosion (p < 0.05). Amounts of bone resorption and deposition were higher in condyles with surface erosion (both p < 0.01). In patients with condylar erosion, the presence of joint pain was associated with a decrease in condylar volume and an increase in net resorption (both p < 0.01). When both joint pain and condylar erosion were present, patients with parafunctional habits showed reduced condylar volume after treatment (p < 0.05). Condylar volume change after treatment was negatively correlated with the duration of pain relief (R = - 0.501, p < 0.05). These results indicate that condylar erosion and TMJ pain could be significant variables affecting TMJ volume changes after treatment. Establishing appropriate treatment strategies is crucial for managing condylar erosion and TMJ pain.