Pediatric distal both-bone forearm fractures treated with percutaneous pinning with or without ulna fixation: a retrospective cohort study from two centres.

PURPOSE: This study investigated the clinical and functional outcomes of children with distal both-bone forearm fractures treated by fixation of the radius only compared to fixation of both the radius and ulna. METHODS: A total of 71 patients from two centres with distal both-bone forearm fractures (30 in the ulna-yes group, 41 in the ulna-no group) who underwent closed reduction and percutaneous pinning treatment were retrospectively analysed. Operation duration, number of fluoroscopic exposures, loss of reduction rate and angulation based on radiographic assessment were compared between the two groups. Evaluation of wrist function including Gartland-Werley Score and Mayo Wrist Score were compared at the last follow-up. RESULTS: Ulna angulation upon bone healing on the posteroanterior and the lateral plane of ulna-no group (6.11 ± 1.56°; 6.51 ± 1.69°) was significantly greater than that of ulna-yes group (4.49 ± 1.30°; 5.05 ± 2.18°) (p < 0.05). No significant difference was found in the loss of reduction rate between ulna-yes group (6.67%, 2/30) and the ulna-no group (4.88%, 2/41) (p > 0.05). At last follow-up, no significant difference was found between the Gartland-Werley Scores of the ulna-yes group (1.83 ± 3.25, range: 0-16) and ulna-no group (1.85 ± 2.72, range: 0-11.5) (p > 0.05). No significant difference was found between the Mayo Wrist Scores of the ulna-yes group (92.60 ± 6.20) and ulna-no group (92.15 ± 7.58) (p > 0.05). CONCLUSIONS: For distal both-bone forearm fractures in children, fixation of only the radius appears to be a viable method with equivalent clinical outcomes compared to fixation of both the radius and ulna.

It is safe to use the ulnar length difference to correct the radial length difference in the 3D-planning process of a radius osteotomy in patients with a distal radius malunion.

BACKGROUND: A corrective radius osteotomy is often performed in patients with a symptomatic distal radius malunion. In 3D-planned osteotomies, the unaffected radius is mirrored over the malunited radius after adjusting for left-right length differences using both ulnae. This approach assumes that ulnar length differences in a malunion population are similar to those in a healthy population. This study was conducted to analyze the difference in ulnar length in a distal radius malunion population and to assess the potential influence of age, sex, or malunion side on this difference. METHODS: We evaluated 65 adult patients with distal radius malunion using bilateral forearm CT scans. 3D models of both ulnae were constructed, and length differences were determined along a standardized length axis. The results were compared to two populations without a radius malunion. RESULTS: The average absolute ulnar length difference was 2.57 mm (SD 1.81), which was comparable to the two healthy populations. This difference was not significantly affected by age, sex, or malunion side. CONCLUSION: This study demonstrated that using the ulnar length difference to correct for radial length difference in the current 3D planning process, before using the contralateral radius as a template for a corrective osteotomy in patients with radius malunion, is safe.

[ZHANG Weihua's experience in treatment of cervical spondylotic radiculopathy with ulna-tibia needling therapy combined with decompression-loosening manual manipulation].

The paper introduces professor ZHANG Weihua's experience in treatment of cervical spondylotic radiculopathy (CSR) with ulna-tibia needling therapy combined with decompression-loosening manual manipulation. Using "palpating, detecting and imaging observing", professor ZHANG Weihua gives the accurate diagnosis for the location, the stage and the severity of the disease. According to the nature of the disease, CSR is treated in three stages. He proposes the academic thought, "taking the tendons as the outline, regarding the meridians as the essential, rooting at qi and blood, co-regulating tendons and bones". The ulna-tibia needling therapy and decompression-loosening manual manipulation are combined in treatment. In the ulna-tibia needling therapy, the acupuncture is delivered at the lower 1/3 of the cutaneous regions of taiyang and shaoyang meridians, on the ulnar region (belt-like distribution). The decompression-loosening manual manipulation is operated in 3 steps, i.e. relaxing the nape region, decompressing and relaxing (includes positioning rotational wrenching, upward and backward elevation) and supination wrenching, and analgesia and regulating tendons; and the manipulation for analgesia and regulating tendons is supplemented to enhance the effect.

Association between carpal height ratio and ulnar variance in normal wrist radiography.

INTRODUCTION: The wrist joint is a complex anatomical structure, and various radiographic parameters are utilized to assess its normal alignment and orientation. Among these parameters are carpal height ratio (CHR) and ulnar variance (UV). Previous literature has indicated that factors such as age and gender may influence these parameters; However, there is a lack of studies investigating these differences specifically in the Middle East or Jordan. Additionally, no prior research has explored the relationship between UV and CHR. Therefore, the objective of this study is to investigate these critical radiological parameters and their associations. METHODOLOGY: A cross-sectional study design was employed, wherein a total of 385 normal wrist X-rays were reviewed, and CHR and UV were measured. Intra-observer and inter-observer reliability assessments were conducted to ensure the consistency and accuracy of measurements. Additionally, the association between UV and CHR was measured and plotted for further analysis. RESULTS: In our study, the mean CHR was 0.5 (range: 0.4 to 1.5), and the mean UV was - 0.3 mm (range: -5.8 mm to 4.1 mm). We found a significant negative correlation between CHR and age (p < 0.05). No significant gender differences were observed in UV and CHR. Additionally, a weak positive correlation was found between UV and CHR (Pearson correlation coefficient = 0.13, p = 0.01; adjusted R2 = 0.014, p = 0.02). CONCLUSION: Age correlated significantly with a decline in carpal height ratio. Additionally, ulnar variance had a week positive yet significant correlation with carpal height ratio. LEVEL OF EVIDENCE: Cross-sectional study, Level III.

Radiographic evaluation of the forelimb bone development in maned wolves (Chrysocyon brachyurus).

This study aimed to assess the fusion of growth plates and the development of secondary ossification centres in the forelimb bones of maned wolves (Chrysocyon brachyurus), contrasting the findings with established data from domestic dogs. Three maned wolves, comprising one male and two females, initially aged between 3 and 4 months, were subjected to monthly radiographic evaluations until 10-11 months of age, followed by bimonthly assessments until 18-19 months of age, encompassing both forelimbs. The closure times of growth plates were observed as follows: supraglenoid tubercle (7-8 months), proximal humerus (17-19 months), distal humerus (8-9 months), medial epicondyle of the humerus (8-9 months), proximal ulna (9-10 months), proximal radius (13-15 months), distal ulna (13-15 months) and distal radius (17-19 months). Statistical analysis revealed significant differences in the areas of secondary ossification centres in the proximal epiphyses of the humerus and radius, respectively, observed from the initial evaluation at 8-9 months and 6-7 months. Conversely, the epiphyses of the supraglenoid tubercle, distal humerus, proximal ulna, distal ulna, medial epicondyle of the humerus and distal radius did not exhibit significant area differences between 3-4 months and 4-5 months, yet notable distinctions emerged at 5-6 months. In summary, while the radiographic appearance of epiphyseal growth plates and secondary ossification centres in maned wolves resembles that of domestic dogs, closure times vary. These findings contribute to understanding the dynamics of epiphyseal growth plates in this species.

Effect of the Sauvé-Kapandji method on the wrist contact surface for distal radial ulnar joint disorders.

BACKGROUND: The Sauvé-Kapandji (S-K) method is a surgical procedure performed for chronic deformities of the distal radial ulnar joint (DRUJ). Changes to the joint contact surface from pre- to postoperatively under physiological in vivo conditions have not yet been determined for this useful treatment. The aim of the present study was therefore to compare the articular contact area of the wrist joint between before and after the S-K method for DRUJ disorders. METHODS: The SK method was performed for 15 patients with DRUJ osteoarthritis and ulnar impaction syndrome. We calculated the Mayo Wrist Score as the patient's clinical findings and created 3-dimensional bone models of cases in which the S-K method was performed and calculated the contact area and shift in the center of the contact area using customized software. RESULTS: The Mean modified Mayo Wrist Score improved significantly from 60.3 preoperatively to 80.3 postoperatively (P < 0.01). Scaphoid contact area to the radius increased significantly from 112.6 ± 37.0 mm2 preoperatively to 127.5 ± 27.8 mm2 postoperatively (P = 0.03). Lunate contact area to radius-ulna was 121.3 ± 43.3 mm2 preoperatively and 112.5 ± 37.6 mm2 postoperatively, but this decrease was not significant (P = 0.38). Contact area ratio of scaphoid to lunate increased significantly from 1.01 ± 0.4 preoperatively to 1.20 ± 0.3 postoperatively (P = 0.02). Postoperative translations of the center of the scaphoid and lunate contact areas were decomposed into ulnar and proximal directions. Ulnar and proximal translation distances of the scaphoid contact area were 0.8 ± 1.7 mm and 0.4 ± 0.6 mm, respectively, and those of the lunate contact area were 1.1 ± 1.7 mm and 0.4 ± 1.1 mm, respectively. This study revealed changes in wrist contact area and center of the contact area before and after the S-K method. CONCLUSION: These results may accurately indicate changes in wrist joint contact area from pre- to postoperatively using the S-K method for patients with DRUJ disorder. Evaluation of changes in contact area due to bone surface modeling of the wrist joint using 3DCT images may be useful in considering surgical methods.

Cutibacterium acnes Infection as a Cause of Nonunion After Ulnar-Shortening Osteotomy.

Ulnar-shortening osteotomy is a reliable solution to treat ulnar impaction syndrome, but it has a significant rate of nonunion as a known complication. Generally nonunion after the procedure is attributed to noninfectious causes. When infections happen, they follow the microbiological trends of nonunions elsewhere in the body. We present a case of ulnar-shortening osteotomy using an oblique-cut osteotomy system that resulted in septic nonunion. At the time of revision surgery, Cutibacterium acnes and Staphylococcus hominis were isolated from the osteotomy site. The patient was successfully treated using intravenous antibiotics and the two-stage Masquelet technique and eventually went on to bony union. As C acnes is rarely encountered in this context, this report highlights the need to consider all possible pathogens in the workup of a potentially septic nonunion. Surgeons should consider bacteria such as C acnes that require prolonged incubation for isolation from cultures, which may not be part of many institutions' usual protocol. [Orthopedics. 2024;47(4):e211-e213.].

The Accuracy of Height Prediction Equations in Greek Patients: A Cross-Sectional Study.

In clinical settings, standing height measurement is often difficult to perform due to patients' inability to stand upright. Height prediction equations derived from measurements of the length of other body segments have been published; however, they are not readily applicable to all populations since ethnic differences affect the relationship between standing height and body segment length. This cross-sectional study aimed to examine the accuracy of height prediction using the Malnutrition Universal Screening Tool (MUST) height predictive equations among Greek patients and to develop new, nationally representative equations. The study population consisted of 1198 Greek adult outpatients able to stand upright without assistance and without medical conditions that affected their height. Standing height, ulna length, knee height and demi-span measurements were obtained from 599 males and 599 females. Patients were stratified into age groups of <55 and ≥55 years, <60 and ≥60 years and <65 and ≥65 years according to the categories indicated by the MUST for height prediction from alternative measurements. There were positive correlations between standing height and ulna length and knee height and demi-span length (p < 0.001) in both sexes and all age categories. A strong correlation was observed between the measured and predicted standing height using ulna length (rho = 0.870, p < 0.001), knee height (rho = 0.923, p < 0.001) and demi-span length (rho = 0.906, p < 0.001). The average difference between the MUST indicative equations' height predictions from alternative measurements and actual height was -3.04 (-3.32, -2.76), -1.21 (-1.43, -0.988) and 2.16 (1.92, 2.41), respectively. New height prediction equations for Greek patients were identified, with the predicted values closer to the measured standing heights than those predicted with the MUST indicative equations for height prediction from alternative measurements.

An Automatic Method for Elbow Joint Recognition, Segmentation and Reconstruction.

Elbow computerized tomography (CT) scans have been widely applied for describing elbow morphology. To enhance the objectivity and efficiency of clinical diagnosis, an automatic method to recognize, segment, and reconstruct elbow joint bones is proposed in this study. The method involves three steps: initially, the humerus, ulna, and radius are automatically recognized based on the anatomical features of the elbow joint, and the prompt boxes are generated. Subsequently, elbow MedSAM is obtained through transfer learning, which accurately segments the CT images by integrating the prompt boxes. After that, hole-filling and object reclassification steps are executed to refine the mask. Finally, three-dimensional (3D) reconstruction is conducted seamlessly using the marching cube algorithm. To validate the reliability and accuracy of the method, the images were compared to the masks labeled by senior surgeons. Quantitative evaluation of segmentation results revealed median intersection over union (IoU) values of 0.963, 0.959, and 0.950 for the humerus, ulna, and radius, respectively. Additionally, the reconstructed surface errors were measured at 1.127, 1.523, and 2.062 mm, respectively. Consequently, the automatic elbow reconstruction method demonstrates promising capabilities in clinical diagnosis, preoperative planning, and intraoperative navigation for elbow joint diseases.

Automatic identification of radius and ulna bone landmarks on 3D virtual models.

BACKGROUND: For bone morphology and biomechanics analysis, landmarks are essential to define position, orientation, and shape. These landmarks define bone and joint coordinate systems and are widely used in these research fields. Currently, no method is known for automatically identifying landmarks on virtual 3D bone models of the radius and ulna. This paper proposes a knowledge-based method for locating landmarks and calculating a coordinate system for the radius, ulna, and combined forearm bones, which is essential for measuring forearm function. This method does not rely on pre-labeled data. VALIDATION: The algorithm is validated by comparing the landmarks placed by the algorithm with the mean position of landmarks placed by a group of experts on cadaveric specimens regarding distance and orientation. RESULTS: The median Euclidean distance differences between all the automated and reference landmarks range from 0.4 to 1.8 millimeters. The median angular differences of the coordinate system of the radius and ulna range from -1.4 to 0.6 degrees. The forearm coordinate system's median errors range from -0.2 to 2.0 degrees. The median error in calculating the rotational position of the radius relative to the ulna is 1.8 degrees. CONCLUSION: The automatic method's applicability depends on the use context and desired accuracy. However, the current method is a validated first step in the automatic analysis of the three-dimensional forearm anatomy.

Bizarre parosteal osteochondromatous proliferation in the distal ulna where the lesion is continuous with the medullary cavity: a case report.

BACKGROUND: Bizarre parosteal osteochondromatous proliferation (BPOP) is a rare benign bone tumor, it is also called "Nora's lesion". The lesion is characterized by heterotopic ossification of the normal bone cortex or parosteal bone. The etiology of BPOP is unclear and may be related to trauma. In most BPOPs, the lesion is not connected to the medullary cavity. Here we report an atypical case, characterized by reversed features compared to the typical BPOP, which demonstrated continuity of the lesion with the cavity. CASE PRESENTATION: An 11-year-old female child had a slow-growing mass on her right wrist for 8 months with forearm rotation dysfunction. Plain X-rays showed an irregular calcified mass on the right distal ulna, and computed tomography (CT) showed a pedunculated mass resembling a mushroom protruding into the soft tissue at the distal ulna. The medulla of this lesion is continuous with the medulla of the ulna. A surgical resection of the lesion, together with a portion of the ulnar bone cortex below the tumor was performed, and the final pathology confirmed BPOP. After the surgery, the child's forearm rotation function improved significantly, and there was no sign of a recurrence at 1-year follow-up. CONCLUSION: It is scarce for BPOP lesions to communicate with the medullary cavity. However, under-recognition of these rare cases may result in misdiagnosis or inappropriate treatment thereby increasing the risk of recurrence. Therefore, special cases where BPOP lesions are continuous with the medulla are even more important to be studied to understand better and master these lesions. Although BPOP is a benign tumor with no evidence of malignant transformation, the recurrence rate of surgical resection is high. We considered the possibility of this particular disease prior to surgery and performed a surgical resection with adequate safety margins. Regular postoperative follow-up is of utmost importance, without a doubt.

Magnetic Resonance Imaging Assessment of Ulnar Wrist Pain: A Practical Guide for Surgeons.

Ulnar-sided wrist pain is a challenging clinical scenario due to multiple overlapping pathologies and involved anatomic structures. Advanced imaging such as magnetic resonance imaging can be used as an effective diagnostic adjunct if interpreted correctly. In this article, clinically relevant structures and radiographic correlates of the ulnar wrist are discussed and a corresponding systematic approach to reviewing magnetic resonance imaging is presented.

Effect of different ulnar osteotomies on loading of the distal radioulnar joint: a finite element analysis.

BACKGROUND: Ulnar impingement syndrome is a prevalent source of ulnar carpal pain; however, there is ongoing debate regarding the specific location of shortening, the method of osteotomy, the extent of shortening, and the resulting biomechanical alterations. METHOD: To investigate the biomechanical changes in the distal radioulnar joint (DRUJ) resulting from different osteotomy methods, a cadaveric specimen was dissected, and the presence of a stable DRUJ structure was confirmed. Subsequently, three-dimensional data of the specimen were obtained using a CT scan, and finite element analysis was conducted after additional processing. RESULTS: The DRUJ stress did not change significantly at the metaphyseal osteotomy of 2-3 mm but increased significantly when the osteotomy length reached 5 mm. When the osteotomy was performed at the diaphysis, the DRUJ stress increased with the osteotomy length, and the increase was greater than that of metaphyseal osteotomy. Stress on the DRUJ significantly increases when the position is changed to pronation dorsi-extension. Similarly, the increase in stress in diaphyseal osteotomy was greater than that in metaphyseal osteotomy. When the model was subjected to a longitudinal load of 100 N, neither osteotomy showed a significant change in DRUJ stress at the neutral position. However, the 100 N load significantly increased stress on the DRUJ when the position was changed to pronation dorsi-extension, and the diaphyseal osteotomy significantly increased stress on the DRUJ. CONCLUSIONS: For patients with distal oblique bundle, metaphyseal osteotomy result in a lower increase in intra-articular pressure in the DRUJ compared to diaphyseal osteotomy. However, it is crucial to note that regardless of the specific type of osteotomy employed, it is advisable to avoid a shortening length exceeding 5 mm.

P. aeruginosa infection of the ulna, a rare complication after arterial puncture.

Pseudomonas aeruginosa, a Gram-negative bacterium known to induce severe infections, is seldomly reported in scientific literature as a contributor of osteomyelitis. In this case report, a 71-year-old woman exhibited recurring infections and enduring forearm pain. A subsequent MRI revealed osteomyelitis in the distal ulna, linked to an arterial blood gas sample taken months earlier. Despite undergoing multiple extended courses of antibiotic treatment, the patient eventually underwent surgery on her left forearm. Biopsy cultures conclusively confirmed the presence of P. aeruginosa.

Insights into digit evolution from a fate map study of the forearm using Chameleon, a new transgenic chicken line.

The cellular and genetic networks that contribute to the development of the zeugopod (radius and ulna of the forearm, tibia and fibula of the leg) are not well understood, although these bones are susceptible to loss in congenital human syndromes and to the action of teratogens such as thalidomide. Using a new fate-mapping approach with the Chameleon transgenic chicken line, we show that there is a small contribution of SHH-expressing cells to the posterior ulna, posterior carpals and digit 3. We establish that although the majority of the ulna develops in response to paracrine SHH signalling in both the chicken and mouse, there are differences in the contribution of SHH-expressing cells between mouse and chicken as well as between the chicken ulna and fibula. This is evidence that, although zeugopod bones are clearly homologous according to the fossil record, the gene regulatory networks that contribute to their development and evolution are not fixed.

Free fibula flap to achieve bone union after congenital pseudoarthrosis of the forearm in neurofibromatosis: Technical report based on 3 cases, and literature review.

Congenital pseudarthrosis of the forearm bones (CPFBs) is rare, with only 106 reported cases, and is frequently associated with neurofibromatosis (NF). Approximately 5% of patients with NF develop pseudarthrosis, and 50% of patients with pseudarthrosis have NF. Achieving bone union is difficult in congenital pseudarthrosis. Many methods have been attempted, including casting, internal fixation with or without grafting, and electrical stimulation, but failure is frequent. Free vascularized fibular flaps (FVFs) have been used to bridge long bone defects since 1975 and in tibial pseudarthrosis since 1979. In CPFB, FVF is more successful than other methods in achieving union and is the current treatment of choice. Here, we presented three cases of forearm pseudarthrosis treated with FVF, reviewed the literature on CPFB, and discussed some technical aspects of FVF treatment. Three cases of congenital pseudoarthrosis were treated with free fibula flaps, diagnosed at ages of 7 years (ulna), 15 months (radius), and 9 years (radius and ulna). Two flaps were stabilized with intramedullary wires and latterly, one with compression plates. One persistent nonunion received revision nonvascularized bone grafting and plating. All patients achieved union by 11 months after index surgery. Reconstruction with vascularized fibula is the treatment of choice because it offers the highest published union rates and good functional results. Complete resection of the affected bone and stable fixation, latterly with compression plates are critical to success. Surgery is technically demanding, and complications are common. Secondary surgery may be required, but outcomes are favorable. LEVEL OF EVIDENCE: IV.

Ulnar bone tuberculosis in children: Case report and literature review.

RATIONALE: Tuberculosis of the long tubular bones in children's extremities is infrequent, particularly in the ulna. Early diagnosis poses significant challenges. This report presents a case involving a 2-year-old child with tuberculosis of the ulnar bone, accompanied by a comprehensive review of pertinent literature. The purpose of this study is to share diagnostic and therapeutic experiences and provide potentially valuable insights. PATIENT CONCERNS: In this case, the patient exhibited complete destruction and expansion of the ulnar bone, resulting in a forearm size considerably greater than normal. Concerns were raised about the irreversible deformation of the ulna, the potential for a malignant bone tumor, and its impact on forearm function, potentially endangering the patient's life. DIAGNOSES: The diagnosis was confirmed as tuberculosis of the ulnar bone. INTERVENTIONS: The patient underwent surgery to remove the affected ulnar tissue and received anti-tuberculosis medication. OUTCOMES: Subsequent to treatment, the destruction and expansion of the ulnar bone resolved, with the return of normal ulnar morphology and bone structure. LESSONS: Even in the absence of typical symptoms like fever, weight loss, and loss of appetite, extensive destruction and expansion of a long tubular bone should prompt vigilant consideration of bone tuberculosis.

Posttraumatic proximal radioulnar synostosis: Current concepts on the clinical presentations, classifications, and open surgical approaches.

In the forearm, posttraumatic heterotopic ossification usually forms as a proximal radioulnar synostosis. It can occur after soft tissue injury involving the interosseous membrane or after surgery involving the radio and ulna, such as distal biceps tendon repair. It can also be induced by radial head dislocation or fracture. Screening radiography can be used to select the appropriate time for excision. The synostosis can be resected when the ectopic bone margin and trabeculation appear mature on radiographs. An interval of 6-12 months from the injury is generally recommended based on ectopic bone maturity. Selection of the surgical approach depends on site, extension (elbow joint or proximal radioulnar joint), severity of the initial articular surface, and periarticular tissue injury. The posterolateral approach is indicated for synostoses: at or distal to the bicipital tuberosity, at the level of the radial head, and proximal radioulnar joint. The posterior global approach is recommended when the forearm synostosis is associated with complete bony ankylosis of the elbow involving the distal aspect of the humerus. After surgical resection of a proximal radioulnar synostosis, the exposed bone surfaces can be covered with interposition material to minimize recurrence.

Distinct patterns of fracture propagation in distal radial fractures and the relationship to the ulnar head.

BACKGROUND: The aim was to assess the direction of distal radius fractures and their relationship to the ulnar head. METHODS: We reviewed the 160 wrist radiographs. The fracture line was measured on the postero-anterior and lateral radiographs relative to the long axis of the forearm and the relationship to the ulnar head. FINDINGS: PA radiographs: the fracture line ran distal ulnar to proximal radial (ulnar to radial) in 11%, transverse in 74% and distal radial to proximal ulnar (radial to ulnar) in 16%. Lateral radiographs: the fracture line ran distal volar to proximal dorsal in 88%, transverse in two 1% and dorsal to volar in 11%. Radial shift (7.5%) only occurred with ulnar to radial or transverse fractures. The ulnar to radial fracture line started at the proximal end of the ulnar head/distal radio-ulnar joint in 88%. The radial to ulnar fracture line started ended a mean of 2.5 mm proximal to the distal radio-ulnar joint (p < 0.01). The transverse fracture line started at the base of the distal radio-ulnar joint in 53% and proximally in 47%. INTERPRETATION: There are two distinct coronal patterns: radial to ulnar ending c. 2 mm proximal to the distal radio-ulnar joint; ulnar to radial starting at the proximal distal radio-ulnar joint. There may be third pattern - transverse fractures; these may be variants of the above. Sagittally the main direction is volar to dorsal but 11% are obverse. This is the first description of distinct fracture patterns in extra-articular distal radius fractures. In addition the fracture patterns appear to correlate with different directions of force transmission which fit with our understanding of falling and the relatively uncontrolled impact of the wrist/hand with the ground. These patterns of fracture propagation help understand how the biomechanics of wrist fractures and may enable prediction of collapse.