Optical, vibrational, and photoluminescence properties of holmium-doped boro-bismuth-germanate glasses.

Holmium (Ho3+)-doped boro-bismuth-germanate glasses having the chemical composition (30-x)B2O3 + 20GeO2 + 20Bi2O3 + 20Na2O + 10Y2O3 + xHo2O3, where x = 0.1, 0.5, 1.0, and 2.0 mol% were prepared by melt-quenching technique. The prepared glasses were examined for thermal, optical, vibrational, and photoluminescent properties. The prepared glasses were found to be thermally very stable. The optical bandgap and Urbach energies of 0.1 mol% Ho2O3-doped boro-bismuth-germanate glass were calculated to be 3.3 eV and 377 MeV, respectively, using the absorption spectrum. The Judd-Ofelt analysis was performed on the 0.1 mol% Ho2O3-doped glass and compared the obtained parameters with literature. The branching ratio (ß) and emission cross-section (σem) of the green band were determined to be 0.7 and 0.24 × 10-20 cm2, respectively. Under 450 nm excitation, a strong green emission around 550 nm was observed and assigned to the (5S2 + 5F4) → 5I8 (Ho3+) transition. Upon an increase of Ho2O3 content from 0.1 to 2.0 mol%, the intensities of all observed emission bands as well as decay time of the (5S2 + 5F4) → 5I8 transition have been decreased gradually. The reasons behind the decrease in emission intensity and decay time were discussed. The strong green emission suggests that these glasses may be a better option for display devices and green emission applications.

Study on polymer composites with glass for gamma ray shielding.

The shielding of gamma radiation is of the utmost importance in industries, such as nuclear power plants, medical imaging, and space exploration. For the purpose of shielding objects in such an environment, it is essential to design materials with flexibility as well as high shielding capability. In order to enhance the radiation attenuation effectiveness of polymers, such as polyvinyl alcohol (PVA), glass has been blended with varying percentages. The fabricated composite has been subjected to gamma-ray interaction studies. The radiation shielding parameter, such as mass attenuation coefficient (µ/ρ), has been determined for various energies, such as 137Cs (661.6 keV) and 60Co (1173 and 1332 keV). It is observed that the PVA composite with glass exhibits improved gamma radiation shielding properties compared to PVA. Therefore, the present work paves the way for the utility of PVA polymer with glass, offering a cost-effective and sustainable approach to gamma radiation shielding in radiation environments.

Gamma-ray interaction studies of concrete with waste glass fillers.

In the present work, the efficacy of waste glass as fillers in concrete for gamma-ray shielding has been studied. Glass fillers of 0, 15, 30, 45, and 60% concentrations have been incorporated into the concrete mixture. The attenuation measurements were performed using gamma spectrometer with NaI(Tl) detector at 511, 662, 1173, and 1332 keV gamma energies. Gamma-ray shielding parameters, such as the mass attenuation coefficient (µ/ρ), are determined for all filler concentrations. The mass attenuation coefficient of the prepared samples was found to be varied from 0.081 to 0.088, 0.071 to 0.088, 0.05 to 0.058, and 0.05 to 0.055 (cm2 per g) for 511, 662, 1173, and 1332 keV gamma energies, respectively. It was observed that experimentally determined (µ/ρ) values were in very good agreement with theoretical values calculated from EDAX data. Furthermore, it was observed that (µ/ρ) showed an increasing trend with an increase in filler concentration, which is attributed to the increase in the shielding property of the material. Therefore, the glass-concrete composite can be accustomed to reduce the intensity of gamma radiation.

Impact of bismuth oxide on structural, optical and gamma-ray shielding properties of calcium-sodium-borate glasses.

In the present study, we have prepared six glass samples of bismuth borate using the melt-quenching method with the composition (70-x)B2O3-10CaO-20Na2O-xBi2O3; x = 0, 3, 6, 9, 12 and 15 mol%. The density of the prepared glasses was determined using Archimedes principle. The X-ray diffraction patterns provide confirmation of the amorphous nature of the prepared samples, whereas the Fourier transform infrared measurements pointed to the existence of structural units like BO3, BO4, BiO3 and BiO6 within the glass network. An assessment of the optical absorption spectra unveiled that with the increase in the bismuth oxide content, there was a decrease observed in both the direct and indirect band gap energies. Specifically, they decreased from 3.40 to 2.79 eV and from 3.10 to 2.46 eV, respectively. The properties related to gamma ray attenuation, including the mass attenuation coefficient (µm), effective atomic number (Zeff), half-value layer (HVL) and mean free path (MFP), were examined for all the glass samples. This investigation was carried out using the Phy-X/PSD software, covering the energy range from 0.511 to 1.332 MeV. Out of all the samples, Bi-15, featuring the highest Bi2O3 content, demonstrated the highest µm, Zeff, the smallest HVL and MFP. These results suggest that the glass with 15 mol% of Bi2O3 offers the most effective gamma radiation shielding performance. Moreover, the glasses examined in this study exhibit superior radiation shielding characteristics compared with specific concrete types, namely, ordinary concrete, Hematite serpentine concrete and barite concrete, as well as commercial glasses such as RS-360 and RS-253.

Heterogeneous Integration of Acoustic Microextraction with an Optoelectronic Sensor on Glass for Nucleic Acid Testing.

Lab-on-a-chip systems (LOCs), characterized by their high sensitivity, low sample consumption, and portability, have significantly advanced the field of on-site testing. Despite the evolution of integrated LOCs from qualitative to quantitative analyses, on-chip full integration of sample preparation, purification, and multiplexed detection remains a challenge. Here, we propose a strategy for the heterogeneous integration of a set of complementary metal oxide semiconductor-compatible devices including acoustic resonator, thin-film resistors, and temperature/photosensors as a new type of LOC for nucleic acid testing (NAT). Programmed acoustic streaming-based particles and fluid manipulations largely simplify the nucleic acid extraction process including cell lysis, nucleic acid capture, and elution. The design of the acoustic microextraction module and extraction process was thoroughly studied. Benefitted by the microelectromechanical system approach, the conventional mechanical actions and complex flow control are avoided, which enables a compact hand-held NAT instrument without complicated peripherals. Validation experiments conducted on plasma-harboring mutations in the epidermal growth factor receptor (EGFR) gene confirmed the robustness of the system, achieving an impressive nucleic acid (NA) extraction efficiency of approximately 90% within 5 min and a limit of detection of the target NA in the plasma of 1 copy/µL.

Design and properties of ternary alkali-activated binder based on blast furnace slag, recycled powder and waste glass powder.

Ternary alkali-activated binder was prepared by blast furnace slag (GGBS), recycled powder (RP) and waste glass powder (WGP) using simplex centroid design method. By measuring the fluidity, setting time, drying shrinkage and mechanical property of specimen, the complementary effect of GGBS, RP and WGP was discussed. The reaction mechanism and microstructure were explored by X-ray diffraction and scanning electron microscopy. The results reveal that the addition of RP could significantly reduce the fluidity and setting time of paste, while WGP can obviously improve the rheological property and play a retarding role. The workability of paste can be effectively regulated by mixing RP and WGP together. Whether added alone or in combination, RP and WGP can effectively improve the shrinkage performance. In the ternary system, GGBS can be rapidly activated and form a skeleton structure. The fine RP particles can play a good role in filling the structure, and the pozzolanic reaction of WGP gradually occurs, which makes the microstructure more compact. The incorporation of GGBS, RP and WGP can promote the growth of hydration products, improve the density of microstructure, and form a certain complementary effect.

Marginal integrity of prototype bioactive glass-doped resin composites in class II cavities.

OBJECTIVES: This in vitro study examined the marginal integrity of experimental composite materials doped with bioactive glass (BG). MATERIALS AND METHODS: Class-II MOD cavities were prepared and restored with one of the following composite materials: a commercial composite material as a reference (Filtek Supreme XTE), an experimental composite doped with BG 45S5 (C-20), and an experimental composite doped with a fluoride-containing BG (F-20). Six experimental groups (n = 8) were used, as each of the three composites was applied with (+) or without (-) a universal adhesive (Adper Scotchbond Multipurpose). All specimens were subjected to thermocycling (10,000 x, 5-55 °C) and then additionally stored in artificial saliva for eight weeks. Scanning electron micrographs of the mesial and the distal box were taken at three time points (initial, after thermocycling, and after eight weeks of storage in artificial saliva). The margins were classified as "continuous" and "non-continuous" and the percentage of continuous margins (PCM) was statistically analyzed (α = 0.05). RESULTS: In most experimental groups, thermocycling led to a significant decrease in PCM, while the additional 8-week aging had no significant effect. F-20 + performed significantly better (p = 0.005) after 8 weeks storage in artificial saliva than the reference material with adhesive, while no statistically significant differences were observed at the other two time points. C-20 + exhibited significantly better PCM than the reference material with adhesive after thermocycling (p = 0.026) and after 8 weeks (p = 0.003). CONCLUSIONS: Overall, the experimental composites with BG showed at least as good marginal adaptation as the commercial reference, with an indication of possible re-sealing of marginal gaps. CLINICAL RELEVANCE: Maintaining or improving the marginal integrity of composite restorations is important to prevent microleakage and its likely consequences such as pulp irritation and secondary caries.

Cerium doping of 45S5 bioactive glass improves redox potential and cellular bioactivity.

45S5 Bioglass (BG) is composed of a glass network with silicate based on the component and can be doped with various therapeutic ions for the enhancement of hard tissue therapy. Nanoceria (CeO2) has been shown to indicate redox reaction and enhance the biological response. However, few studies focus on the proportion of CeO2-doped and its effect on the cellular bioactivity of CeO2-doped BG (CBG). In this study, we synthesized the CBG series with increasing amounts of doping CeO2 ranging (1 to 12) wt.%. The synthesized CBG series examined the characterization, mineralization capacity, and cellular activity against BG. Our results showed that the CBG series exhibited a glass structure and indicated the redox states between Ce3+ and Ce4+, thus they showed the antioxidant activity by characterization of Ce. The CBG series had a stable glass network structure similar to BG, which showed the preservation of bioactivity by exhibiting mineralization on the surface. In terms of biological response, although the CBG series showed the proliferative activity of pre-osteoblastic cells similar to BG, the CBG series augmented not only the alkaline phosphatase activity but also the osteogenic marker in the mRNA level. As stimulated the osteogenic activity, the CBG series improved the biomineralization. In conclusion, the CBG series might have a potential application for hard tissue therapeutic purposes.

Data modeling analysis of GFRP tubular filled concrete column based on small sample deep meta learning method.

The meta-learning method proposed in this paper addresses the issue of small-sample regression in the application of engineering data analysis, which is a highly promising direction for research. By integrating traditional regression models with optimization-based data augmentation from meta-learning, the proposed deep neural network demonstrates excellent performance in optimizing glass fiber reinforced plastic (GFRP) for wrapping concrete short columns. When compared with traditional regression models, such as Support Vector Regression (SVR), Gaussian Process Regression (GPR), and Radial Basis Function Neural Networks (RBFNN), the meta-learning method proposed here performs better in modeling small data samples. The success of this approach illustrates the potential of deep learning in dealing with limited amounts of data, offering new opportunities in the field of material data analysis.

Optimized Electrophoretic Deposition of Chitosan/Mesoporous Glass Nanoparticles with Gentamicin on Titanium Implants: Enhancing Hemocompatibility and Antibacterial Activity.

Titanium-based implants have long been studied and used for applications in bone tissue engineering, thanks to their outstanding mechanical properties and appropriate biocompatibility. However, many implants struggle with osseointegration and attachment and can be vulnerable to the development of infections. In this work, we have developed a composite coating via electrophoretic deposition, which is both bioactive and antibacterial. Mesoporous bioactive glass particles with gentamicin were electrophoretically deposited onto a titanium substrate. In order to validate the hypothesis that the quantity of particles in the coatings is sufficiently high and uniform in each deposition process, an easy-to-use image processing algorithm was designed to minimize human dependence and ensure reproducible results. The addition of loaded mesoporous particles did not affect the good adhesion of the coating to the substrate although roughness was clearly enhanced. After 7 days of immersion, the composite coatings were almost dissolved and released, but phosphate-related compounds started to nucleate at the surface. With a simple and low-cost technique like electrophoretic deposition, and optimized stir and suspension times, we were able to synthesize a hemocompatible coating that significantly improves the antibacterial activity when compared to the bare substrate for both Gram-positive and Gram-negative bacteria.

In vitro antifungal and physicochemical properties of polymerized acrylic resin containing strontium-modified phosphate-based glass.

Acrylic resins are widely used as the main components in removable orthodontic appliances. However, poor oral hygiene and maintenance of orthodontic appliances provide a suitable environment for the growth of pathogenic microorganisms. In this study, strontium-modified phosphate-based glass (Sr-PBG) was added to orthodontic acrylic resin at 0% (control), 3.75%, 7.5%, and 15% by weight to evaluate the surface and physicochemical properties of the novel material and its in vitro antifungal effect against Candida albicans (C. albicans). Surface microhardness and contact angle did not vary between the control and 3.75% Sr-PBG groups (p > 0.05), and the flexural strength was lower in the experimental groups than in the control group (p < 0.05), but no difference was found with Sr-PBG content (p > 0.05). All experimental groups showed an antifungal effect at 24 and 48 h compared to that in the control group (p < 0.05). This study demonstrated that 3.75% Sr-PBG exhibits antifungal effects against C. albicans along with suitable physicochemical properties, which may help to minimize the risk of adverse effects associated with harmful microbial living on removable orthodontic appliances and promote the use of various materials.

In vitro and in vivo dissolution of biocompatible S59 glass scaffolds.

Fabrication of porous tissue-engineering scaffolds from bioactive glasses (BAG) is complicated by the tendency of BAG compositions to crystallize in thermal treatments during scaffold manufacture. Here, experimental biocompatible glass S59 (SiO2 59.7 wt%, Na2O 25.5 wt%, CaO 11.0 wt%, P2O5 2.5 wt%, B2O3 1.3 wt%), known to be resistant to crystallization, was used in sintering of glass granules (300-500 µm) into porous scaffolds. The dissolution behavior of the scaffolds was then studied in vivo in rabbit femurs and under continuous flow conditions in vitro (14 days in vitro/56 days in vivo). The scaffolds were osteoconductive in vivo, as bone could grow into the scaffold structure. Still, the scaffolds could not induce sufficiently rapid bone ingrowth to replace the strength lost due to dissolution. The scaffolds lost their structure and strength as the scaffold necks dissolved. In vitro, S59 dissolved congruently throughout the 14-day experiments, resulting in only a slight reaction layer formation. Manufacturing BAG scaffolds from S59 that retain their amorphous structure was thus possible. The relatively rapid and stable dissolution of the scaffold implies that the glass S59 may have the potential to be used in composite implants providing initial strength and stable, predictable release of ions over longer exposure times.

Circular economy life cycle cost for kerbside waste material looping process.

Rapid expansion in urban areas has engendered a superfluity of municipal solid waste (MSW) stemming from contemporary civilization, encompassing commercial sectors and human undertakings. Kerbside waste, a type of MSW, has the potential for recycling and reuse at the end of its first life cycle, but is often limited to a linear cycle. This study aimed to assess the life cycle costs of different separation and recycling methods for handling kerbside waste. A new life cycle cost model, drawing from the circular economy's value retention process (VRP) model, has been created and applied to assess the continuous recycling of kerbside glass. The study investigates two key separation techniques, kerbside recycling mixed bin recycling (KRMB) kerbside glass recycling separate bin (KGRSB) and analyses their impact on the life cycle cost of the recycling process. Additionally, the research explores two approaches of recycling and downcycling: closed-loop recycling, which pertains to the recycling of glass containers, and open-looped recycling, which involves the use of recycled glass in asphalt. The results showed when use annually collected waste as the functional unit, the KRMB model incurred lower costs compared to the KGRSB model due to its lower production output. However, when evaluated over a 1-ton production of glass container and asphalt, the KGRSB method demonstrated superior cost performance with a 40-50% reduction compared to the KRMB method. The open-loop recycling method (asphalt) incurred a higher cost compared to the closed-loop recycling method due to its larger production volume over a 21-year period.

Relined fiberglass posts: influence of resin opacity on the bond strength to intraradicular dentin.

This study aimed to evaluate the bond strength between relined fiberglass posts with different composite resin opacities in different thirds of the intraradicular dentin. Thirty single-rooted premolars were endodontically treated and divided into three groups (n=10): fiberglass posts relined with translucent composite resin, fiberglass posts relined with opaque composite resin, and fiberglass posts without relining. After cementation of the posts, the specimens were cut perpendicular to the long axis of the tooth in slices of approximately 1.3 mm of each third to be analyzed (cervical, middle, and apical) and then subjected to the push-out test. The bond strength (MPa) data were subjected to Shapiro-Wilk normality tests and two-way repeated measures analysis of variance, considering the experimental groups and different regions as study factors. Tukey's post-hoc test (p<.05) was applied for comparisons between the groups. In the cervical third, higher values of bond strength were found for the group relined with translucent resin, with a statistically significant difference for the other groups. In the other regions, both opaque and translucent resins showed similar results, but both showed higher values of bond strength compared to fiberglass posts without relining. The bond strength of fiberglass posts to different thirds of intraradicular dentin is influenced by composite resin relining as well as the opacity of the resin. The use of translucent composite resin is a more effective alternative for fiberglass posts relining.

Vertical confinement enhances surface exploration in bacterial twitching motility.

Bacteria are often found in environments where space is limited, and they attach themselves to surfaces. One common form of movement on these surfaces is bacterial twitching motility, which is powered by the extension and retraction of type IV pili. Although twitching motility in unrestricted conditions has been extensively studied, the effects of spatial confinement on this behaviour are not well understood. In this study, we explored the diffusive properties of individual twitching Pseudomonas aeruginosa cells in spatially confined conditions. We achieved this by placing the bacteria between layers of agarose and glass, and then tracking the long-term twitching motility of individual cells. Interestingly, we found that while confinement reduced the immediate speed of twitching, it paradoxically increased diffusion. Through a combination of mechanical and geometrical analysis, as well as numerical simulations, we showed that this increase in diffusion could be attributed to mechanical factors. The constraint imposed by the agarose altered the diffusion pattern of the bacteria from normal to superdiffusion. These findings provide valuable insights into the motile behaviour of bacteria in confined environments.

Optical properties investigation and multicolor behavior of neodymium (Nd3+)-doped oxyfluoride silicate glasses SiO2-PbO-PbF2.

The aim of this research is to investigate novel compositions of oxyfluoride glasses doped with Neodymium (Nd3+) rare earth ions in the visible spectrum. This area has not been extensively studied in the existing literature, so it is vital to understand the favorable photoluminescence characteristics within this part of the electromagnetic spectrum. Therefore, we synthesized and characterized SiO2-PbO-PbF2 (SPF) doped with 1% neodymium (Nd3+) ions glasses. Spectroscopic analyses, based on Judd-Ofelt theory, were conducted on absorption spectra. These analyses enabled to determine absorption cross-sections, transition probabilities, and Judd-Ofelt intensity parameters Ω2, Ω4, and Ω6 for the different transition. Additionally, we calculated various radiative properties, such as branching ratios, integrated cross-sections, radiative lifetimes, emission cross-section, optical gain, and the multicolor behavior (chromaticity coordinates, CIE diagram) under different excitation wavelengths. The results suggest promising prospects for using these oxyfluoride silicate glasses doped with Nd3+ as a fluorophore, potentially for lasing materials around 630-nm emission and in other photonic applications.

The quantum transition of the two-dimensional Ising spin glass.

Quantum annealers are commercial devices that aim to solve very hard computational problems1, typically those involving spin glasses2,3. Just as in metallurgic annealing, in which a ferrous metal is slowly cooled4, quantum annealers seek good solutions by slowly removing the transverse magnetic field at the lowest possible temperature. Removing the field diminishes the quantum fluctuations but forces the system to traverse the critical point that separates the disordered phase (at large fields) from the spin-glass phase (at small fields). A full understanding of this phase transition is still missing. A debated, crucial question regards the closing of the energy gap separating the ground state from the first excited state. All hopes of achieving an exponential speed-up, compared to classical computers, rest on the assumption that the gap will close algebraically with the number of spins5-9. However, renormalization group calculations predict instead that there is an infinite-randomness fixed point10. Here we solve this debate through extreme-scale numerical simulations, finding that both parties have grasped parts of the truth. Although the closing of the gap at the critical point is indeed super-algebraic, it remains algebraic if one restricts the symmetry of possible excitations. As this symmetry restriction is experimentally achievable (at least nominally), there is still hope for the quantum annealing paradigm11-13.

Wound Healing Promotion via Release of Therapeutic Metallic Ions from Phosphate Glass Fibers: An In Vitro and Ex Vivo Study.

Biomaterials capable of promoting wound healing and preventing infections remain in great demand to address the global unmet need for the treatment of chronic wounds. Phosphate-based glasses (PG) have shown potential as bioresorbable materials capable of inducing tissue regeneration, while being replaced by regenerated tissue and releasing therapeutic species. In this work, phosphate-glass-based fibers (PGF) in the system P2O5-CaO-Na2O added with 1, 2, 4, 6, and 10 mol % of the therapeutic metallic ions (TMI) Ag+, Zn2+, and Fe3+ were manufactured via electrospinning of coacervate gels. Coacervation is a sustainable, cost-effective, water-based method to produce PG. All TMI are effective in promoting wound closure (re-epithelialization) in living human skin ex vivo, where the best-performing system is PGF containing Ag+. In particular, PGF with ≥4 mol % of Ag+ is capable of promoting 84% wound closure over 48 h. These results are confirmed by scratch test migration assays, with the PGF-Ag systems containing ≥6 mol % of Ag+, demonstrating significant wound closure enhancement (up to 72%) after 24 h. The PGF-Ag systems are also the most effective in terms of antibacterial activity against both the Gram-positive Staphylococcus aureus and the Gram-negative Escherichia coli. PGF doped with Zn2+ shows antibacterial activity only against S. aureus in the systems containing Zn2+ ≥ 10 mol %. In addition, PGF doped with Fe3+ rapidly accelerates ex vivo healing in patient chronic wound skin (>30% in 48 h), demonstrating the utility of doped PGF as a potential therapeutic strategy to treat chronic wounds.

Ultrasonic activation of adhesive systems increases bond strength and intratubular penetration of resin cement in root dentin subjected to radiation therapy.

OBJECTIVE: This study aimed to evaluate the effect of ultrasonic activation of etch-and-rinse and self-etch adhesive systems on the bond strength of resin cement to irradiated root dentin. MATERIALS AND METHODS: Eighty human maxillary anterior teeth were distributed into 8 groups (n = 10), according to the type of adhesive system used (etch-and-rinse and self-etch), the ultrasonic activation of the adhesive systems, and the dentin condition (irradiated or non-irradiated - 70 Gy). Endodontic treatment was performed followed by fiberglass post-space preparation. After fiberglass posts' luting, the roots were transversely sectioned on dentin discs and submitted to the push-out bond strength test (0.5 mm/min). The fractured specimens were analyzed under a stereomicroscope and Scanning Electron Microscope (SEM) for failure mode classification. One of the dentin discs was analyzed under SEM to evaluate the characteristics of the adhesive interface. RESULTS: Irradiated specimens had lower bond strength than non-irradiated specimens (P < 0.0001). Ultrasonic activation of both adhesive systems increased the bond strength of the resin cement to irradiated dentin (P < 0.0001). Radiotherapy significantly affected the failure mode in the middle (P = 0.024) and apical thirds (P = 0.032) (adhesive failure). CONCLUSION: Non-irradiated specimens had a more homogeneous adhesive interface. When ultrasonically activated, both adhesive systems showed a greater number of resinous tags, regardless of the dentin condition. CLINICAL RELEVANCE: Ultrasonic activation of adhesive systems is a feasible strategy to enhance fiberglass posts retention in oncological patients.

Intra-radicular retention with custom designed CAD-CAM fibRe-reinforced composite post-core: a dental technique.

A technique is outlined for utilising a polymeric composite reinforced with glass fibres in a three-dimensional mesh as a post-core in aesthetic cases. The clinical procedure involves obtaining an impression of the root canal space, scanning the definitive cast, and milling a fibre-reinforced composite post-core. Subsequently, the intra-radicular post-core is cemented using an adhesive resin cement. The use of custom-made computer-aided design-computer-aided manufacturing (CAD-CAM) fibre-reinforced composite post-core facilitates repairability, provides better adaptation to the root canal space, avoids uneven cement thickness, ensures chemical adhesion to resin cement, and promotes favourable aesthetics when combined with all-ceramic crowns.