[Measurement and analysis of the imaging dose with megavoltage computed tomography for helical tomotherapy].

ABSTRACT

BACKGROUND & OBJECTIVE: During the helical tomotherapy process, megavoltage computed tomography (MVCT) images are usually used for guiding the precise setup of patients before/after treatment delivery, which would certainly increase the total dose for patients. This study was to investigate the imaging dose of MVCT using the body and head phantom on a tomotherapy machine. METHODS: A set of cylindrical body and head phantoms was adopted for scanning with different pitch values (1.0/2.0/3.0), lengths (4.8/7.2/9.6/12/14.4 cm) and patient setups on the couch of tomotherapy system. The average MVCT imaging doses were measured using A1SL chambers inserted in the phantoms with preset geometry. The dose uniformity was qualitatively analyzed. RESULTS: The MVCT scanning dose for the body phantom was between 0.599 and 2.876 cGy during each treatment delivery, while the dose for the head phantom was between 0.913 and 3.231 cGy. Two major parameters, the assigned pitch numbers and scanning lengths, were the most important impacts to the dose variation. The MVCT dose was inversely proportional to the CT pitch value. With respect to the scanning length, the doses responded differently along the radial direction of the phantoms with different setup criteria. CONCLUSION: The results may provide a reliable guidance for proper planning design of the scanning region, which is valuable to help minimize the extra doses to patient.