Temporal signal stability of KCl:Eu(2+) storage phosphor dosimeters.

ABSTRACT

PURPOSE: Current KClEu(2+) prototype dosimeters require a wait time of 12 h between irradiation and dosimetric readout. Although irradiating the dosimeters in the evening and reading on the following day works well in the clinical schedule, reducing the wait time to few hours is desirable. The purposes of this work are to determine the origin of the unstable charge-storage centers and to determine if these centers respond to optical or thermal excitation prior to dosimetric readout. METHODS: Pellet-style KClEu(2+) dosimeters were fabricated in-house for this study. A 6 MV photon beam was used to irradiate the dosimeters. After x ray irradiation, dosimeters were subjected to external excitation with near-infrared (NIR) light, ultraviolet (UV) light, or thermal treatment. Photostimulated luminescence (PSL) signal's temporal stability was subsequently measured at room temperature over a few hours using a laboratory PSL readout system. The dosimeters were also placed in a cryostat to measure the temperature dependence of the temporal stability down to 10 K. RESULTS: Strong F-band was present in the PSL stimulation spectrum, indicating that F-centers were the electron-storage centers in KClEu(2+) where an electron was stored at a chlorine anion vacancy. Due to deep energy-depth (2.2 eV), F-centers were probably not responsible for the fast fading in the first a few hours post x ray irradiation. In addition, weak NIR bands were present. However, there was no change in PSL stabilization rate with intense NIR excitation, suggesting that the NIR bands played no role in the PSL fading. At temperatures lower than 77 K there was almost no signal fading with time. Noticeable PSL was observed for undoped KCl samples at room temperature, suggesting that Cl(2) (-) V(k) centers served as hole-storage centers for both undoped and doped KCl where a hole was trapped by a chlorine molecular ion. V(k) centers were stable at low temperature and became mobile at room temperature, probably causing the observed PSL fading with time. On the other hand, V(k) center could be stabilized by Eu(2+) activator or oxygen in the lattice, leading to the stable component in the PSL. A thermal process at elevated temperatures (60 °C or higher) was able to significantly accelerate the migration process resulting in a fast stabilization of PSL. However, this could not be accomplished using intense UV excitation. CONCLUSIONS: Thermal treatment enables KClEu(2+) prototypes to be ready for readout in 1 h without the need of applying a large time-dependent correction factor. However, this cannot be achieved using optical preexcitation.