Reusable fibrous adsorbent prepared via Co-radiation induced graft polymerization for iodine adsorption.

Volatile iodine released from nuclear power plant reactors is radiological hazard to environment and human's health because of their high fission yield and environmental mobility. The complexity of nuclear waste management motivated the development of solid-phase adsorbents. Herein, co-radiation induced graft polymerization (CRIGP) was employed in the graft polymerization of N-vinyl-2-pyrrolidone (NVP) onto polyethylene-coated polypropylene skin-core (PE/PP) fibers using electron beam (EB) irradiation. This work provides a one-step green synthetic approach to prepare iodine fibrous adsorbents without any chemical initiators or large amount of organic solvent. The original and modified PE/PP fibers were characterized by fourier transform infrared spectrometry (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric (TG) and scanning electron microscopy (SEM) to demonstrate the grafting of NVP onto the PE/PP fibers. The capacity of iodine absorbed by the PE/PP-g-PNVP fibers was 1237.8 mg/g after 180 min. Meanwhile, absorbents can be regenerated efficiently by two different means of ethanol elution and heating at 120 °C, respectively. Within 10 min, 94.17% and 90.12% of the iodine can be released from the PE/PP-g-PNVP fibers with these two methods, respectively. The adsorbent exhibited a long service life of at least ten adsorption-desorption cycles, suggesting that PE/PP-g-PNVP fibers might be a promising adsorbent for volatile iodine adsorption from fission products in nuclear power plant reactors.