Biomechanical study of extramedullary and intramedullary fixation in the treatment of unstable intertrochanteric reversed-tilt fractures of the femur.

Background: To investigate the efficacy of the 135° hip screw, 95° intramedullary hip screw (IMHS) and 95° hip screw in the treatment of intertrochanteric reverse dip fracture of the femur. Methods: We retrospectively analyzed 125 matched pairs of human femurs (median age 64 years) which were osteotomized at a 33° angle in the left femur and extended downward from the minor trochanter to simulate a reverse oblique intertrochanteric fracture. The right femur served as a control. The left femur (n=4) was implanted with a 135° hip screw, 95° hip screw, or IMHS. A strain detector was placed distal to the fracture site to monitor fragment strain. The lateral displacement of the proximal femur was measured by a linear variable differential transformer. An Instron tester measured stiffness, strain, and lateral displacement at 25° adduction, and 90° adduction with vertical loads on the femoral head. A 2 cm gap was then formed at the fracture site to simulate comminution and the mechanical test was repeated. Results: Before the formation of the gap, there was no significant difference in stiffness among different bone structures (P>0.05), but after the formation of the gap, the stiffness of all the adduction structures decreased (P=0.03), and the difference in adduction was statistically significant (135° hip screw: 46.6%±3%; 95° hip screw: 22.9%±2%; IMHS: 53.7%±7.8%; P<0.05). Similar results were found for the abduction and buckling positions. There was no significant difference in the lateral displacement of the gap before (P=0.92) and after (P=0.26), but a significant difference in the failure load was found (135° hip screw: 1,222±560 N; 95° hip screw: 2,566±283 N; IMHS: 4,644±518 N; P=0.02). Conclusions: There was no statistically significant difference in stiffness among different structures (P>0.05). However, in the presence of gaps, IMHS bone implant structures are much stiffer than 135° and 95° structures and have a greater destructive load.