Biomechanical Analysis of Trapezoidal Thread Screw-Rod Fixation in Pedicle Section of Cervical Spine: A Finite-Element Analysis.

ABSTRACT

Background: Cervical pedicle screw-rod fixation presents a complex approach in spinal surgery, offering enhanced spine stabilization in variable conditions considering traumatic injuries, degenerative changes, as well as orthopaedic and oncological ailments. This technique employs small diameter screw implants strategically placed to bolster the mechanical integrity of the spine. Notably, it involves minimally invasive procedures, resulting in smaller incisions and reduced patient discomfort. This study aims to assess the effects of trapezoidal thread screws in pedicle sections of the cervical spine during flexion-extension loadings, focusing on factors such as range of motion (ROM), implant stress, and stress on adjacent bone. Methods: Utilizing CT scan data, a finite element model of the cervical spine (C2-C7 vertebrae) was prepared. Trapezoidal thread screws were integrated into a single-level pedicle screw-rod fixation at the C5-C6 vertebrae. The C2 vertebra were given a compressive load of 50 N along with a moment of 1 Nm, resulting in the immobilization of the C7. Results and Discussion: The results indicate a reduction in ROM at the C5-C6 level by 69% to 77% compared to the intact spine during flexion-extension loading, with a slight increase in ROM observed at adjacent cervical spine levels. Stress analysis revealed that the trapezoidal thread screws induced stresses ranging from 24 MPa to 29 MPa in PEEK trapezoidal screw-rod implants, which fall below the material's yield stress. Conclusions: This suggests that the trapezoidal thread profile may be advantageous in minimizing stress concentration, attributed to its larger contact area with the vertebrae bone between the threads.