Development and test of the laser blow-off impurity injection system in experimental advanced superconducting tokamak.

ABSTRACT

The Laser Blow-Off (LBO) impurity injection system is a crucial tool for studying impurity transport and plasma behavior. Conducting proactive impurity transport research is challenging on experimental advanced superconducting tokamak (EAST) due to the uncontrollable generation of impurity sources; therefore, it is necessary to develop a laser blow-off impurity injection system for injecting controlled trace impurity particles. This study presents the design and test results of an LBO system for the EAST. The system aims to provide precise and repeatable control over the timing and quantity of impurity injection. The system primarily consists of a laser source, two mirrors, a moveable focusing lens, a target material, and a vacuum system. The movement of the focusing lens is achieved by a three-dimensional displacement system. The operation of the system is completed by a remote control system. With the accurate control system, the laser spot diameter is adjustable, allowing for modification of impurity injection quantity. The test results demonstrate that the system can rapidly detect external trigger signals and ensure precise timing for the impurity injection. Furthermore, this system can also quickly change the focal point of the laser spot, addressing the requirements for impurity injections during the experiments with less than 0.4 mm position error for laser spot focusing. Test results have shown that the aluminum film material can be peeled off by the LBO system when the laser energy exceeds 650 mJ and the smallest ablation spot is about 1 mm. This study is of significant importance for conducting plasma impurity transport research on the EAST.