ABSTRACT
Additive manufacturing of alloys enables low-volume production of functional metallic components with complex geometries. Ultrasonic testing can ensure the quality of these components and detect typical defects generated during laser powder bed fusion (LPBF). However, it is difficult to find a single ultrasonic inspection technique that can detect defects in the large variety of geometries generated using LPBF. In this work, phased array ultrasonic testing (PAUT) is suggested to inspect thick LPBF components, while guided waves are explored for thin curved ones. PAUT is used to detect cylindrical lack of fusion defects in thick LPBF rectangular parts. Practical defects are generated by reducing the laser power at prespecified locations in the samples. The defects' shape and density are verified using optical microscopy and X-ray computed tomography. Partially fused defects down to 0.25 mm in diameter are experimentally detected using a 10 MHz PAUT probe with the total focusing method post-processing. The experimental results are compared to defect images predicted by finite element simulations. For thin components with curved geometry, guided waves are used to detect powder-filled cylindrical defects. The waves are generated using piezoelectric transducers, and the spatiotemporal wavefield is measured using a scanning laser Doppler vibrometer. Using root-mean-square imaging of the wavefield, defects down to 1 mm are clearly detected despite the complex internal features in the samples.