Grafting and controlled release of antimicrobial peptides from mesoporous silica.

The grafting of antimicrobial peptides onto mesoporous silica particles and their controlled release using a green light-responsive linker, which enables tunable release-concentration-time profiles, is presented. The mesoporous silica surface is functionalized with antimicrobial peptides employing sequential functionalization steps, including the grafting of 3-[(2-propynylcarbamate)propyl]triethoxysilane (PPTEOS) as anchor, boron-dipyrromethene (BODIPY) as photosensitive linker, and C14R peptides as antimicrobial agents. Characterization using scanning electron microscopy (SEM), transmission electron microscopy (TEM), attenuated total reflectance infrared (ATR-IR) spectroscopy, and thermogravimetric analysis (TGA) validate the successful fabrication and functionalization of mesoporous silica. The ester-1,2,3-triazole-BODIPY demonstrates high sensitivity to green light and enables C14R antimicrobial peptide release with adjusted concentration-time profiles. Under the applied conditions up to 64 µg mL-1 were released within 40 minutes. The antimicrobial activity of the released C14R on Escherichia coli. BL21(DE3) is demonstrated. Overall, the use of the photosensitive linker not only provides a promising avenue for controlling the release of biomolecules and therapeutics but also opens up opportunities for the development of materials for targeted release in wound dressings, for example.

Tailor-Made Bioactive Papers by Site-Specific and Orthogonal Covalent Immobilization of Proteins.

A strategy for the bioorthogonal immobilization of proteins onto commercially available filter paper is presented. Recently, a two-step approach has been described that relies on covalent immobilization of a linker molecule to paper, followed by enzyme-mediated conjugation of a protein of interest containing an enzyme-recognition tag. Here, this strategy was expanded by evaluating four different chemical and chemoenzymatic reactions and investigating paper loading efficiency and orthogonality. Enhanced green fluorescent protein (EGFP) was used as a model protein to allow quantification of protein loading via fluorescence imaging. Two approaches were identified that showed significantly increased loading efficiencies compared with the previously applied conjugation strategy. Additionally, all four methods were proven orthogonal to each other, allowing simultaneous immobilization of a mixture of proteins to a premodified assembly of two paper sheets.

Conditional Cell Penetration of Masked CPPs by an ADEPT-like Approach.

The intracellular delivery of cargos via cell penetrating peptides (CPPs) holds significant promise as a drug delivery vehicle, but a major issue is their lack of cell type specificity, which can lead to detrimental off-target effects. We use an ADEPT-like concept to introduce conditional and selective activation of cellular uptake by using the lysine-rich, cationic, and amphiphilic L17E peptide as a model CPP. By masking the lysine residues of the L17E peptide with enzyme-cleavable acetyl protecting groups, the delivery of the covalently conjugated fluorophore TAMRA to HeLa cells was diminished. Recovery of cellular uptake could be achieved by deacetylation of the masked acetylated L17E peptide using the NAD-dependent sirtuin 2 (SirT2) deacetylase in vitro. Finally, trastuzumab-SirT2 and anti-B7H3-SirT2 antibody-enzyme conjugates were generated for the conditional and selective delivery of a cryptophycin cytotoxin by the L17E peptide. While the masked peptide still demonstrated some cytotoxicity, selective cell killing mediated by the antibody-enzyme conjugates was observed.

Novel amino-Li resin for water-based solid-phase peptide synthesis.

We report the first application of a novel amino-Li resin to water-based solid-phase peptide synthesis (SPPS) applying the Smoc-protecting group approach. We demonstrated that it is a suitable support for the sustainable water-based alternative to a classical SPPS approach. The resin possesses good swelling properties in aqueous milieu, provides significant coupling sites, and may be applicable to the synthesis of difficult sequences and aggregation-prone peptides.

Parahydrogen-induced polarization allows 2000-fold signal enhancement in biologically active derivatives of the peptide-based drug octreotide.

Octreotide, a somatostatin analogue, has shown its efficacy for the diagnostics and treatment of various types of cancer, i.e., in octreotide scan, as radio-marker after labelling with a radiopharmaceutical. To avoid toxicity of radio-labeling, octreotide-based assays can be implemented into magnetic resonance techniques, such as MRI and NMR. Here we used a Parahydrogen-Induced Polarization (PHIP) approach as a cheap, fast and straightforward method. Introduction of L-propargyl tyrosine as a PHIP marker at different positions of octreotide by manual Solid-Phase Peptide Synthesis (SPPS) led to up to 2000-fold proton signal enhancement (SE). Cell binding studies confirmed that all octreotide variants retained strong binding affinity to the surface of human-derived cancer cells expressing somatostatin receptor 2. The hydrogenation reactions were successfully performed in methanol and under physiologically compatible mixtures of water with methanol or ethanol. The presented results open up new application areas of biochemical and pharmacological studies with octreotide.

Sactipeptide Engineering by Probing the Substrate Tolerance of a Thioether-Bond-Forming Sactisynthase.

Sactipeptides are ribosomally synthesized peptides containing a unique sulfur to α-carbon crosslink. Catalyzed by sactisynthases, this thioether pattern endows sactipeptides with enhanced structural, thermal, and proteolytic stability, which makes them attractive scaffolds for the development of novel biotherapeutics. Herein, we report the in-depth study on the substrate tolerance of the sactisynthase AlbA to catalyze the formation of thioether bridges in sactipeptides. We identified a possible modification site within the sactipeptide subtilosin A allowing for peptide engineering without compromising formation of thioether bridges. A panel of natural and hybrid sactipeptides was produced to study the AlbA-mediated formation of thioether bridges, which were identified mass-spectrometrically. In a proof-of-principle study, we re-engineered subtilosin A to a thioether-bridged, specific streptavidin targeting peptide, opening the door for the functional engineering of sactipeptides.

Synthetic Integrin-Targeting Dextran-Fc Hybrids Efficiently Inhibit Tumor Proliferation In Vitro.

Herein, we present the design, synthesis, and biological evaluation of novel integrin-targeting molecular hybrids combining RGD peptides and a potent cytotoxin presented on dextran polysaccharides. Based on an aglycosylated Fc as a centerpiece, endosomal-cleavable cytotoxic agent monomethyl auristatin E (MMAE) and dextran as multimerization site were covalently connected by two bioorthogonal enzyme-mediated reactions site-specifically. Decoration of dextran with cyclic RGD peptides, introduced by copper "click" reaction, resulted in the final constructs with the potential to kill integrin-overexpressing tumor cells. We found that these modifications had little impact on the stability of the Fc scaffold and the RGD-bearing construct showed good binding properties of αvß3-expressing U87MG cells. Furthermore, the construct showed a remarkable antiproliferative activity. These results demonstrate the general capability of our design to provoke receptor-mediated endocytosis upon binding to the cellular surface, followed by endosomal cleavage of the linkage between Fc-dextran and MMAE and its subsequent release. Our approach opens new avenues to transcribe small molecule binders into tailor-made multimeric molecular hybrids with antitumor potential.

Toward Fabrication of Bioactive Papers: Covalent Immobilization of Peptides and Proteins.

Herein, we report a novel two-step method for the covalent, site-directed, and efficient immobilization of proteins on lab-made paper sheets. First, paper fibers were modified with a peptidic anchor comprising enzyme recognition motifs. Four different conjugation strategies for peptide immobilization were evaluated with respect to reproducibility and fiber loading efficiency. After manufacturing of the peptide-preconditioned paper, oriented conjugation of the model protein tGFP containing a C-terminal recognition sequence for either sortase A or microbial transglutaminase was assessed semiquantitatively by fluorescence measurement and inspected by confocal laser scanning microscopy (CLSM). The two enzymes utilized for protein conjugation used the same oligoglycine peptide anchor, and both proved to be suitable for controlled oriented linkage of substrate proteins at physiological conditions.

Functional paper-based materials for diagnostics.

Functional papers are the subject of extensive research efforts and have already become an irreplaceable part of our modern society. Among other issues, they enable fast and inexpensive detection of a plethora of analytes and simplify laboratory work, for example in medical tests. This article focuses on the molecular and structural fundamentals of paper and the possibilities of functionalization, commercially available assays and their production, as well as on current and future challenges in research in this field.

Enhancing the Pharmacokinetics and Antitumor Activity of an α-Amanitin-Based Small-Molecule Drug Conjugate via Conjugation with an Fc Domain.

Herein we describe the design and biological evaluation of a novel antitumor therapeutic platform that combines the most favorable properties of small-molecule drug conjugates (SMDCs) and antibody drug conjugates (ADCs). Although the small size of SMDCs, compared to ADCs, is an appealing feature for their application in the treatment of solid tumors, SMDCs usually suffer from poor pharmacokinetics, which severely limits their therapeutic efficacy. To overcome this limitation, in this proof-of-concept study we grafted an α-amanitin-based SMDC that targets prostate cancer cells onto an immunoglobulin Fc domain via a two-step "program and arm" chemoenzymatic strategy. We demonstrated the superior pharmacokinetic properties and therapeutic efficacy of the resulting Fc-SMDC over the SMDC in a prostate cancer xenograft mouse model. This approach may provide a general strategy toward effective antitumor therapeutics combining small size with pharmacokinetic properties close to those of an ADC.

Multivalent dextran hybrids for efficient cytosolic delivery of biomolecular cargoes.

The development of novel biotherapeutics based on peptides and proteins is often limited to extracellular targets, because these molecules are not able to reach the cytosol. In recent years, several approaches were proposed to overcome this limitation. A plethora of cell-penetrating peptides (CPPs) was developed for cytoplasmic delivery of cell-impermeable cargo molecules. For many CPPs, multimerization or multicopy arrangement on a scaffold resulted in improved delivery but also higher cytotoxicity. Recently, we introduced dextran as multivalent, hydrophilic polysaccharide scaffold for multimerization of cell-targeting cargoes. Here, we investigated covalent conjugation of a CPP to dextran in multiple copies and assessed the ability of resulted molecular hybrid to enter the cytoplasm of mammalian cells without largely compromising cell viability. As a CPP, we used a novel, low-toxic cationic amphiphilic peptide L17E derived from M-lycotoxin. Here, we show that cell-penetrating properties of L17E are retained upon multivalent covalent linkage to dextran. Dextran-L17E efficiently mediated cytoplasmic translocation of an attached functional peptide and a peptide nucleic acid (PNA). Moreover, a synthetic route was established to mask the lysine side chains of L17E with a photolabile protecting group thus opening avenues for light-triggered activation of cellular uptake.

Sustainable Peptide Synthesis Enabled by a Transient Protecting Group.

The growing interest in synthetic peptides has prompted the development of viable methods for their sustainable production. Currently, large amounts of toxic solvents are required for peptide assembly from protected building blocks, and switching to water as a reaction medium remains a major hurdle in peptide chemistry. We report an aqueous solid-phase peptide synthesis strategy that is based on a water-compatible 2,7-disulfo-9-fluorenylmethoxycarbonyl (Smoc) protecting group. This approach enables peptide assembly under aqueous conditions, real-time monitoring of building block coupling, and efficient postsynthetic purification. The procedure for the synthesis of all natural and several non-natural Smoc-protected amino acids is described, as well as the assembly of 22 peptide sequences and the fundamental issues of SPPS, including the protecting group strategy, coupling and cleavage efficiency, stability under aqueous conditions, and crucial side reactions.

Recent progress in transglutaminase-mediated assembly of antibody-drug conjugates.

Antibody-drug conjugates (ADCs) are hybrid molecules intended to overcome the drawbacks of conventional small molecule chemotherapy and therapeutic antibodies by merging beneficial characteristics of both molecule classes to develop more efficient and patient-friendly options for cancer treatment. During the last decades a versatile bioconjugation toolbox that comprises numerous chemical and enzymatic technologies have been developed to covalently attach a cytotoxic cargo to a tumor-targeting antibody. Microbial transglutaminase (mTG) that catalyzes isopeptide bond formation between proteinaceous or peptidic glutamines and lysines, provides many favorable properties that are beneficial for the manufacturing of these conjugates. However, to efficiently utilize the enzyme for the constructions of ADCs, different drawbacks had to be overcome that originate from the enzyme's insufficiently understood substrate specificity. Within this review, pioneering methodologies, recent achievements and remaining limitations of mTG-assisted assembly of ADCs will be highlighted.

Tailoring Activity and Selectivity of Microbial Transglutaminase.

Microbial transglutaminase (mTG), a protein-glutamine γ-glutamyltransferase from Streptomyces mobaraensis, is an enzyme capable of forming isopeptide bonds between the nearly inert (from the chemical point of view) γ-carboxamides present in the side chain of glutamine residues and primary amines. Its high substrate tolerance, compared to other bond-forming enzymes, makes it a versatile tool for numerous applications including food manufacturing, material science, and biotechnology. Although an mTG-mediated bioconjugation is a well-established technique, some major drawbacks of this approach need to be bypassed, with the poor substrate specificity being among the most essential ones. Especially biopharmaceutical methodologies require high subsite specificity of the utilized biocatalyst, which is often not warranted by mTG. Therefore, access to tailor-made transglutaminases is strongly desired. Herein, we describe a protocol for the generation of mTG libraries based on yeast surface display, which allow for the isolation of mutants with altered properties. Moreover, methods for cloning of respective expression vectors, recombinant expression, and in vitro procession are provided.

TRAIL-Inspired Multivalent Dextran Conjugates Efficiently Induce Apoptosis upon DR5 Receptor Clustering.

Triggering apoptosis of tumor cells has been in focus of cancer-inspired research since decades. As clustering of death receptor 5 (DR5), which is overexpressed on various cancer cells, leads to formation of the death-inducing signaling cascade (DISC), DR5 has recently become a promising target for tumor treatment. Herein, we demonstrate that covalent multimerization of a death receptor targeting peptide (DR5TP) on a dextran scaffold generates potent apoptosis-inducing conjugates (EC50 =2-20 nm). A higher conformational flexibility compared to reported DR5TP multimerization approaches, introduced by the polysaccharide framework compensates the reported need for the defined ligand orientation that was considered as essential prerequisite for effective receptor clustering and apoptosis induction. Enzyme-catalyzed ligation of a hydrophilic dextran conjugate bearing multiple DR5-targeting sites to a human fragment crystallizable (Fc) receptor did not affect the potency (EC50 =2-7 nm), providing an option for improved in vivo half-life and prospective conjugation to an antibody of interest in view of bispecific tumor targeting.

Efficient Site-Specific Antibody-Drug Conjugation by Engineering a Nature-Derived Recognition Tag for Microbial Transglutaminase.

Microbial transglutaminase (mTG) has recently emerged as a powerful tool for antibody engineering. In nature, it catalyzes the formation of amide bonds between glutamine side chains and primary amines. Being applied to numerous research fields from material sciences to medicine, mTG enables efficient site-specific conjugation of molecular architectures that possess suitable recognition motifs. In monoclonal antibodies, the lack of native transamidation sites is bypassed by incorporating specific peptide recognition sequences. Herein, we report a rapid and efficient mTG-catalyzed bioconjugation that relies on a novel recognition motif derived from its native substrate Streptomyces papain inhibitor (SPIP ). Improved reaction kinetics compared to commonly applied sequences were demonstrated for model peptides and for biotinylation of Her2-targeting antibody trastuzumab variants. Moreover, an antibody-drug conjugate assembled from trastuzumab that was C-terminally tagged with the novel recognition sequence revealed a higher payload-antibody ratio than the reference antibody.

Dextramabs: A Novel Format of Antibody-Drug Conjugates Featuring a Multivalent Polysaccharide Scaffold.

Antibody-drug conjugates (ADCs) are multicomponent biomolecules that have emerged as a powerful tool for targeted tumor therapy. Combining specific binding of an immunoglobulin with toxic properties of a payload, they however often suffer from poor hydrophilicity when loaded with a high amount of toxins. To address these issues simultaneously, we developed dextramabs, a novel class of hybrid antibody-drug conjugates. In these architectures, the therapeutic antibody trastuzumab is equipped with a multivalent dextran polysaccharide that enables efficient loading with a potent toxin in a controllable fashion. Our modular chemoenzymatic approach provides an access to synthetic dextramabs bearing monomethyl auristatin as releasable cytotoxic cargo. They possess high drug-to-antibody ratios, remarkable hydrophilicity, and high toxicity in vitro.

Ultrafast Single-Scan 2D†NMR Spectroscopic Detection of a PHIP-Hyperpolarized Protease Inhibitor.

Two-dimensional NMR spectroscopy is one of the most important spectroscopic tools for the investigation of biological macromolecules. However, due to the low sensitivity of NMR spectroscopy, it takes usually from several minutes to many hours to record such spectra. Here, the possibility of detecting a bioactive derivative of the sunflower trypsin inhibitor-1 (SFTI-1), a tetradecapeptide, by combining parahydrogen-induced polarization (PHIP) and ultrafast 2D NMR spectroscopy is shown. The PHIP activity of the inhibitor was achieved by labeling with O-propargyl-l-tyrosine. In 1D PHIP experiments a signal enhancement of a factor of approximately 1200 compared to standard NMR was found. This enhancement permits measurement of 2D NMR correlation spectra of low-concentrated SFTI-1 in less than 10 seconds, employing ultrafast single-scan 2D NMR detection. As experimental examples PHIP-assisted ultrafast single-scan TOCSY spectra of SFTI-1 are shown.

Microbial transglutaminase for biotechnological and biomedical engineering.

Research on bacterial transglutaminase dates back to 1989, when the enzyme has been isolated from Streptomyces mobaraensis. Initially discovered during an extensive screening campaign to reduce costs in food manufacturing, it quickly appeared as a robust and versatile tool for biotechnological and pharmaceutical applications due to its excellent activity and simple handling. While pioneering attempts to make use of its extraordinary cross-linking ability resulted in heterogeneous polymers, currently it is applied to site-specifically ligate diverse biomolecules yielding precisely modified hybrid constructs comprising two or more components. This review covers the extensive and rapidly growing field of microbial transglutaminase-mediated bioconjugation with the focus on pharmaceutical research. In addition, engineering of the enzyme by directed evolution and rational design is highlighted. Moreover, cumbersome drawbacks of this technique mainly caused by the enzyme's substrate indiscrimination are discussed as well as the ways to bypass these limitations.

Light-Controlled Chemoenzymatic Immobilization of Proteins towards Engineering of Bioactive Papers.

Efficient and reliable methods for the generation of bioactive papers are of growing interest in relation to point-of-care testing devices that do not require extensive analytical equipment. Herein, we report the immobilization of functional proteins on paper fibers using a modular chemoenzymatic approach. The synthetic strategy relies on a combination of highly efficient spatially controllable photo-triggered cycloaddition followed by site-specific sortase A-catalyzed transamidation. This site-directed and regiospecific method has allowed unidirectional and covalent immobilization of several proteins displaying different functional properties, with ramifications for application in paper-based diagnostics.