ABSTRACT
Crystallographic texture is a key organization feature of many technical and biological materials. In these materials, especially hierarchically structured ones, the preferential alignment of the nano constituents heavily influences the macroscopic behavior of the material. To study local crystallographic texture with both high spatial and angular resolution, we developed Texture Tomography (TexTOM). This approach allows the user to model the diffraction data of polycrystalline materials using the full reciprocal space of the crystal ensemble and describe the texture in each voxel via an orientation distribution function, hence it provides 3D reconstructions of the local texture by measuring the probabilities of all crystal orientations. The TexTOM approach addresses limitations associated with existing models: it correlates the intensities from several Bragg reflections, thus reducing ambiguities resulting from symmetry. Further, it yields quantitative probability distributions of local real space crystal orientations without further assumptions about the sample structure. Finally, its efficient mathematical formulation enables reconstructions faster than the time scale of the experiment. This manuscript presents the mathematical model, the inversion strategy and its current experimental implementation. We show characterizations of simulated data as well as experimental data obtained from a synthetic, inorganic model sample: the silica-witherite biomorph. TexTOM provides a versatile framework to reconstruct 3D quantitative texture information for polycrystalline samples; it opens the door for unprecedented insights into the nanostructural makeup of natural and technical materials.
ABSTRACT
Understanding the effects of consolidating inorganic mineral treatments on carbonate stones of cultural heritage, and on the nature and distribution of newly formed products within the matrix, poses a significant challenge in Heritage Science and Conservation Science. Existing analytical methods often fail to deliver spatial and compositional insights into the newly formed crystalline phases with the appropriate high lateral resolution. In this study, we explore the capabilities and limitations of synchrotron radiation (SR) micro-X-ray powder diffraction (µXRPD) mapping combined with micro-X-ray fluorescence (µXRF) to give insight into compounds formed following the application of ammonium oxalate (AmOx) and diammonium phosphate-based (DAP) solutions on porous carbonate stone. Ultimately, the integration of µXRPD mapping and µXRF analysis proved itself a powerful asset in providing precise qualitative and quantitative data on the newly formed phases, in the case of both calcium oxalates (CaOxs) and calcium phosphates (CaPs), and their complex stratigraphic distribution, thus opening a new route for applications to a more comprehensive study of inorganic treatments applied to carbonate substrates.
ABSTRACT
We determined stress-induced deformations and the thermal stability of nanorod-shaped tobacco mosaic virus (TMV) capsids in coffee-ring structures by X-ray nanodiffraction. The hexagonal capsids lattice transforms under compression in the outer boundary zone of the coffee-ring into a tetragonal lattice. The helical pitch of the nanorods increases by about 2.5% across the outer boundary zone while the lateral distance between nanorods decreases continuously across the whole coffee-ring structure by about 2% due to compressive forces. The diffraction patterns show a mixture of helical scattering and Bragg peaks attributed to a lattice of nanorods interlocked by their helical grooves. Thermo-nanodiffraction reveals water loss up to about 100 °C resulting in a reduction of the helical pitch by about 6% with respect to its maximum value and a reduction of the nanorods separation by about 0.5 nm. Up to about 200 °C the pitch is increasing again by about 2%. Secondary crystallization in the bulk reaches a maximum at 150-160 °C. At higher temperatures the crystallinity is continuously decreasing up to about 220 °C. Above about 200 °C and depending on the heating history, the nanorods start disintegrating into small, randomly oriented aggregates.
Subject(s)
Hot Temperature , Nanotubes/chemistry , Stress, Mechanical , Tobacco Mosaic Virus/chemistry , Biomechanical Phenomena , Capsid/chemistryABSTRACT
Biomineralization integrates complex processes leading to an extraordinary diversity of calcareous biomineral crystalline architectures, in intriguing contrast with the consistent presence of a sub-micrometric granular structure. Hence, gaining access to the crystalline architecture at the mesoscale, that is, over a few granules, is key to building realistic biomineralization scenarios. Here we provide the nanoscale spatial arrangement of the crystalline structure within the 'single-crystalline' prisms of the prismatic layer of a Pinctada margaritifera shell, exploiting three-dimensional X-ray Bragg ptychography microscopy. We reveal the details of the mesocrystalline organization, evidencing a crystalline coherence extending over a few granules. We additionally prove the existence of larger iso-oriented crystalline domains, slightly misoriented with respect to each other, around one unique rotation axis, and whose shapes are correlated with iso-strain domains. The highlighted mesocrystalline properties support recent biomineralization models involving partial fusion of oriented nanoparticle assembly and/or liquid droplet precursors.
ABSTRACT
Because of the tremendous variability of crystallite sizes and shapes in nano-materials, it is challenging to assess the corresponding size-property relationships and to identify microstructures with particular physical properties or even optimized functions. This task is especially difficult for nanomaterials formed by self-organization, where the spontaneous evolution of microstructure and properties is coupled. In this work, two compositionally graded TiAlN films were (i) grown using chemical vapour deposition by applying a varying ratio of reacting gases and (ii) subsequently analysed using cross-sectional synchrotron X-ray nanodiffraction, electron microscopy and nanoindentation in order to evaluate the microstructure and hardness depth gradients. The results indicate the formation of self-organized hexagonal-cubic and cubic-cubic nanolamellae with varying compositions and thicknesses in the range of â¼3-15â nm across the film thicknesses, depending on the actual composition of the reactive gas mixtures. On the basis of the occurrence of the nanolamellae and their correlation with the local film hardness, progressively narrower ranges of the composition and hardness were refined in three steps. The third film was produced using an AlCl3/TiCl4 precursor ratio of â¼1.9, resulting in the formation of an optimized lamellar microstructure with â¼1.3â nm thick cubic Ti(Al)N and â¼12â nm thick cubic Al(Ti)N nanolamellae which exhibits a maximal hardness of â¼36â GPa and an indentation modulus of â¼522â GPa. The presented approach of an iterative nanoscale search based on the application of cross-sectional synchrotron X-ray nanodiffraction and cross-sectional nanoindentation allows one to refine the relationship between (i) varying deposition conditions, (ii) gradients of microstructure and (iii) gradients of mechanical properties in nanostructured materials prepared as thin films. This is done in a combinatorial way in order to screen a wide range of deposition conditions, while identifying those that result in the formation of a particular microstructure with optimized functional attributes.
ABSTRACT
A compact high-speed X-ray atomic force microscope has been developed for in situ use in normal-incidence X-ray experiments on synchrotron beamlines, allowing for simultaneous characterization of samples in direct space with nanometric lateral resolution while employing nanofocused X-ray beams. In the present work the instrument is used to observe radiation damage effects produced by an intense X-ray nanobeam on a semiconducting organic thin film. The formation of micrometric holes induced by the beam occurring on a timescale of seconds is characterized.
ABSTRACT
Synchrotron X-ray nanodiffraction is used to analyse residual stress distributions in a 200â nm-thick W film deposited on the scalloped inner wall of a through-silicon via. The diffraction data are evaluated using a novel dedicated methodology which allows the quantification of axial and tangential stress components under the condition that radial stresses are negligible. The results reveal oscillatory axial stresses in the range of â¼445-885â MPa, with a distribution that correlates well with the scallop wavelength and morphology, as well as nearly constant tangential stresses of â¼800â MPa. The discrepancy with larger stress values obtained from a finite-element model, as well as from a blanket W film, is attributed to the morphology and microstructural nature of the W film in the via.
ABSTRACT
Biocompatibility is a key issue in the development of new implant materials. In this context, a novel class of biodegrading Mg implants exhibits promising properties with regard to inflammatory response and mechanical properties. The interaction between Mg degradation products and the nanoscale structure and mineralization of bone, however, is not yet sufficiently understood. Investigations by synchrotron microbeam x-ray fluorescence (µXRF), small angle x-ray scattering (µSAXS) and x-ray diffraction (µXRD) have shown the impact of degradation speed on the sites of Mg accumulation in the bone, which are around blood vessels, lacunae and the bone marrow. Only at the highest degradation rates was Mg found at the implant-bone interface. The Mg inclusion into the bone matrix appeared to be non-permanent as the Mg-level decreased after completed implant degradation. µSAXS and µXRD showed that Mg influences the hydroxyl apatite (HAP) crystallite structure, because markedly shorter and thinner HAP crystallites were found in zones of high Mg concentration. These zones also exhibited a contraction of the HAP lattice and lower crystalline order.
Subject(s)
Biocompatible Materials , Bone and Bones/metabolism , Magnesium/metabolism , Minerals/metabolism , Animals , Calcification, Physiologic , Magnesium/pharmacokinetics , Rats , Rats, Sprague-Dawley , X-Ray DiffractionABSTRACT
The extraordinary mechanical performance of spider dragline silk is explained by its highly ordered microstructure and results from the sequences of its constituent proteins. This optimized microstructural organization simultaneously achieves high tensile strength and strain at breaking by taking advantage of weak molecular interactions. However, elucidating how the original design evolved over the 400 million year history of spider silk, and identifying the basic relationships between microstructural details and performance have proven difficult tasks. Here we show that the analysis of maximum supercontracted single spider silk fibers using X ray diffraction shows a complex picture of silk evolution where some key microstructural features are conserved phylogenetically while others show substantial variation even among closely related species. This new understanding helps elucidate which microstructural features need to be copied in order to produce the next generation of biomimetic silk fibers.
Subject(s)
Silk/chemistry , Silk/ultrastructure , Spiders , Animals , Biological Evolution , Phylogeny , Tensile Strength , X-Ray DiffractionABSTRACT
It has recently been established that the high-transition-temperature (high-Tc) superconducting state coexists with short-range charge-density-wave order and quenched disorder arising from dopants and strain. This complex, multiscale phase separation invites the development of theories of high-temperature superconductivity that include complexity. The nature of the spatial interplay between charge and dopant order that provides a basis for nanoscale phase separation remains a key open question, because experiments have yet to probe the unknown spatial distribution at both the nanoscale and mesoscale (between atomic and macroscopic scale). Here we report micro X-ray diffraction imaging of the spatial distribution of both short-range charge-density-wave 'puddles' (domains with only a few wavelengths) and quenched disorder in HgBa2CuO4 + y, the single-layer cuprate with the highest Tc, 95 kelvin (refs 26-28). We found that the charge-density-wave puddles, like the steam bubbles in boiling water, have a fat-tailed size distribution that is typical of self-organization near a critical point. However, the quenched disorder, which arises from oxygen interstitials, has a distribution that is contrary to the usually assumed random, uncorrelated distribution. The interstitial-oxygen-rich domains are spatially anticorrelated with the charge-density-wave domains, because higher doping does not favour the stripy charge-density-wave puddles, leading to a complex emergent geometry of the spatial landscape for superconductivity.
ABSTRACT
The structure and organization of the Type I collagen microfibrils during mineral nanoparticle formation appear as the key factor for a deeper understanding of the biomineralization mechanism and for governing the bone tissue physical properties. In this work we investigated the dynamics of collagen packing during ex-vivo mineralization of ceramic porous hydroxyapatite implant scaffolds using synchrotron high resolution X-ray phase contrast micro-tomography (XPCµT) and synchrotron scanning micro X-ray diffraction (SµXRD). While XPCµT provides the direct 3D image of the collagen fibers network organization with micrometer spatial resolution, SµXRD allows to probe the structural statistical fluctuations of the collagen fibrils at nanoscale. In particular we imaged the lateral spacing and orientation of collagen fibrils during the anisotropic growth of mineral nanocrystals. Beyond throwing light on the bone regeneration multiscale process, this approach can provide important information in the characterization of tissue in health, aging and degeneration conditions. STATEMENT OF SIGNIFICANCE: BONE grafts are the most common transplants after the blood transfusions. This makes the bone-tissue regeneration research of pressing scientific and social impact. Bone is a complex hierarchical structure, where the interplay of organic and inorganic mineral phases at different length scale (from micron to atomic scale) affect its functionality and health. Thus, the understanding of bone tissue regeneration requires to image its spatial-temporal evolution (i) with high spatial resolution and (ii) at different length scale. We exploited high spatial resolution X-ray Phase Contrast micro Tomography and Scanning micro X-ray Diffraction in order to get new insight on the engineered tissue formation mechanisms. This approach could open novel routes for the early detection of different degenerative conditions of tissue.
Subject(s)
Bone Development/physiology , Bone and Bones/diagnostic imaging , Calcification, Physiologic/physiology , Collagen Type I/physiology , Collagen Type I/ultrastructure , X-Ray Diffraction/methods , Animals , Bone and Bones/ultrastructure , Computer Simulation , Models, Biological , Sheep , Tissue Scaffolds , Tomography, X-Ray Computed/methodsABSTRACT
Progresses in the design of well-defined electronic band structure and dedicated functionalities rely on the high control of complex architectural device nano-scaled structures. This includes the challenging accurate description of strain fields in crystalline structures, which requires non invasive and three-dimensional (3D) imaging methods. Here, we demonstrate in details how x-ray Bragg ptychography can be used to quantify in 3D a displacement field in a lithographically patterned silicon-on-insulator structure. The image of the crystalline properties, which results from the phase retrieval of a coherent intensity data set, is obtained from a well-controlled optimized process, for which all steps are detailed. These results confirm the promising perspectives of 3D Bragg ptychography for the investigation of complex nano-structured crystals in material science.
ABSTRACT
We fabricate site-controlled, ordered arrays of embedded Ga nanoparticles on Si, using a combination of substrate patterning and molecular-beam epitaxial growth. The fabrication process consists of two steps. Ga droplets are initially nucleated in an ordered array of inverted pyramidal pits, and then partially crystallized by exposure to an As flux, which promotes the formation of a GaAs shell that seals the Ga nanoparticle within two semiconductor layers. The nanoparticle formation process has been investigated through a combination of extensive chemical and structural characterization and theoretical kinetic Monte Carlo simulations.
ABSTRACT
Spider silks combine a significant number of desirable characteristics in one material, including large tensile strength and strain at breaking, biocompatibility, and the possibility of tailoring their properties. Major ampullate gland silk (MAS) is the most studied silk and their properties are explained by a double lattice of hydrogen bonds and elastomeric protein chains linked to polyalanine ß-nanocrystals. However, many basic details regarding the relationship between composition, microstructure and properties in silks are still lacking. Here we show that this relationship can be traced in flagelliform silk (Flag) spun by Argiope trifasciata spiders after identifying a phase consisting of polyglycine II nanocrystals. The presence of this phase is consistent with the dominant presence of the -GGX- and -GPG- motifs in its sequence. In contrast to the passive role assigned to polyalanine nanocrystals in MAS, polyglycine II nanocrystals can undergo growing/collapse processes that contribute to increase toughness and justify the ability of Flag to supercontract.
Subject(s)
Nanoparticles/chemistry , Peptides/chemistry , Proteins/chemistry , Silk/chemistry , Spiders/metabolism , Amino Acid Motifs , Animals , Hydrogen Bonding , Microscopy, Atomic Force , Proteins/metabolism , Silk/metabolismABSTRACT
The continued downscaling in SiGe heterostructures is approaching the point at which lateral confinement leads to a uniaxial strain state, giving high enhancements of the charge carrier mobility. Investigation of the strain relaxation as induced by the patterning of a continuous SiGe layer is thus of scientific and technological importance. In the present work, the strain in single lithographically defined low-dimensional SiGe structures has been directly mapped via nanobeam x-ray diffraction. We found that the nanopatterning is able to induce an anisotropic strain relaxation, leading to a conversion of the strain state from biaxial to uniaxial. Its origin is fully compatible with a pure elastic deformation of the crystal lattice without involving plastic relaxation by injection of misfit dislocations.
ABSTRACT
The structure and flow of droplets on solid surfaces is investigated with imaging and scattering techniques and compared to simulations. To access nanostructures at the liquid-solid interface advanced scattering techniques such as grazing incidence small-angle x-ray scattering (GISAXS) with micro- and nanometer-sized beams, GISAXS and in situ imaging ellipsometry and GISAXS tomography are used. Using gold nanoparticle suspensions, structures observed in the wetting area due to deposition are probed in situ during the drying of the droplets. After drying, nanostructures in the wetting area and inside the dried droplets are monitored. In addition to drying, a macroscopic movement of droplets is caused by body forces acting on an inclined substrate. The complexity of the solid surfaces is increased from simple silicon substrates to binary polymer brushes, which undergo a switching due to the liquid in the droplet. Nanostructures introduced in the polymer brush due to the movement of droplets are observed.
Subject(s)
Gold/chemistry , Nanostructures/chemistry , Physics/methods , Computer Simulation , Electronics , Nanoparticles/chemistry , Nanotechnology/methods , Particle Size , Polymers/chemistry , Scattering, Radiation , Silicon , Surface Properties , Wettability , X-RaysABSTRACT
We used hard X-ray scanning microscopy with ptychographic coherent diffraction contrast to image a front-end processed passivated microchip fabricated in 80 nm technology. No sample preparation was needed to image buried interconnects and contact layers with a spatial resolution of slightly better than 40 nm. The phase shift in the sample is obtained quantitatively. With the additional knowledge of the elemental composition determined in parallel by X-ray fluorescence mapping, quantitative information about specific nanostructures is obtained. A significant enhancement in signal-to-noise ratio and spatial resolution is achieved compared to conventional hard X-ray scanning microscopy.
ABSTRACT
X-ray radiation damage propagation is explored for hydrated starch granules in order to reduce the step resolution in raster-microdiffraction experiments to the nanometre range. Radiation damage was induced by synchrotron radiation microbeams of 5, 1 and 0.3â µm size with â¼0.1â nm wavelength in B-type potato, Canna edulis and Phajus grandifolius starch granules. A total loss of crystallinity of granules immersed in water was found at a dose of â¼1.3â photonsâ nm(-3). The temperature dependence of radiation damage suggests that primary radiation damage prevails up to about 120â K while secondary radiation damage becomes effective at higher temperatures. Primary radiation damage remains confined to the beam track at 100â K. Propagation of radiation damage beyond the beam track at room temperature is assumed to be due to reactive species generated principally by water radiolysis induced by photoelectrons. By careful dose selection during data collection, raster scans with 500â nm step-resolution could be performed for granules immersed in water.
Subject(s)
Starch/radiation effects , Synchrotrons , Crystallography, X-Ray , Microscopy, Electron, Scanning , Nanotechnology , Orchidaceae/chemistry , Solanum tuberosum/chemistry , Starch/chemistry , Zingiberales/chemistryABSTRACT
A one-dimensional silver (Ag) nanoparticle gradient layer is prepared from an aqueous colloidal solution upon a polystyrene (PS) coated silicon (Si) substrate. For preparation two walls of different wettability are used. The 40 nm PS-layer exhibits a locally constant film thickness due to the strong roughness correlation with the underlying Si-substrate and is less wettable as compared to the glass plate placed above. The Ag nanoparticles have a triangular prism-like shape. The structural characterization of the obtained complex gradient formed by drying is performed with microbeam grazing incidence small-angle x-ray scattering based on compound refractive lenses. Due to the adsorption from aqueous solution in the selective geometry a double gradient type structure defined by two areas with characteristic lateral lengths and a cross-over regime between both is observed.
ABSTRACT
Using stroboscopic techniques, diffraction patterns of ballistic paraffin wax microdrops have been observed. The microdrops, generated by a high-temperature ink-jet system, travel through the 1 mum synchrotron radiation beam with a speed of about 1.4 m/s. Diffraction patterns were recorded in flight by a charge couple device with a microchannel plate image intensifier stage, which was activated with the microdrop generation frequency of 1000 Hz during 2 mus. The data show liquid microdrops with a constant temperature up to 8 mm from the ink-jet system capillary exit. The general technique could be adapted for studying fast structural processes, such as protein conformational changes in aqueous microdrops.